| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The token field is manipulated under the msk socket lock
and accessed lockless in a few spots, add proper ONCE annotation
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The following fields:
- ack_seq
- snd_una
- wnd_end
- rmem_fwd_alloc
are protected by the data lock end accessed lockless in a few
spots. Ensure ONCE annotation for write (under such lock) and for
lockless read.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mptcp-level TX path info (write_seq, bytes_sent, snd_nxt) are under
the msk socket lock protection, and are accessed lockless in a few spots.
Always mark the write operations with WRITE_ONCE, read operations
outside the lock with READ_ONCE and drop the annotation for read
under such lock.
To simplify the annotations move mptcp_pending_data_fin_ack() from
__mptcp_data_acked() to __mptcp_clean_una(), under the msk socket
lock, where such call would belong.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Both the local and the remote key follow the same locking
schema, put in place the proper ONCE accessors.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Similar chunk of code is used in tsnep_rx_poll_zc() and
tsnep_rx_reopen_xsk() to maintain the RX XDP_RING_NEED_WAKEUP flag.
Consolidate the code to common helper function.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can change sctp_sk() to propagate its argument const qualifier,
thanks to container_of_const().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Xin Long <lucien.xin@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can use a global dev_unreg_count counter instead
of a per netns one.
As a bonus we can factorize the changes done on it
for bulk device removals.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement the tun .get_channels functionality. This feature is necessary
for some tools, such as libxdp, which need to retrieve the queue count.
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This fixes the following code style problem:
- WARNING: please, no spaces at the start of a line
- CHECK: Please use a blank line after
function/struct/union/enum declarations
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds support for the RTL8126A found on Asus z790 Maximus Formula.
It was successfully tested w/o the firmware at 1000Mbps. Firmware file
has been provided by Realtek and submitted to linux-firmware.
2.5G and 5G modes are untested.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Paolo points out that ifconfig is legacy and we should not use it.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
By default lan8841's 1588 clock frequency is 125MHz. But when adjusting
the frequency, it is using the 1PPM format of the lan8814. Which is the
wrong format as lan8814 has a 1588 clock frequency of 250MHz. So then
for each 1PPM adjustment would adjust less than expected.
Therefore fix this by using the correct 1PPM format for lan8841.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Christian Marangi says:
====================
net: phy: qcom: qca808x: fixup qca808x LED
This is a bit embarassing and totally my fault so sorry for that!
While reworking the patch to phy_modify API, it was done a logic
error and made the brightness_set function broken. It wasn't
notice in last revisions test as the testing method was to verify
if hw control was correctly working.
Noticing this problem also made me notice an additional problem
with the polarity.
The introduced patch made the polarity configurable but I forgot
to add the required code to enable Active High by default.
(the PHY sets active low by default)
This wasn't notice with hw control testing as the LED blink on
traffic and polarity problem are not notice.
It might be worth discussing if needed a change in implementation
where the polarity function is always called but I think it's
better this way where specific PHY apply fixup with the help
of priv struct and on the config_init phase.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
qca808x PHY provide support for the led_polarity_set OP to configure
and apply the active-low property but on PHY reset, the Active High bit
is not set resulting in the LED driven as active-low.
To fix this, check if active-low is not set in DT and enable Active High
polarity by default to restore correct funcionality of the LED.
Fixes: 7196062b64ee ("net: phy: at803x: add LED support for qca808x")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In switching to using phy_modify_mmd and a more short version of the
LED ON/OFF condition in later revision, it was made a logic error where
value ? QCA808X_LED_FORCE_ON : QCA808X_LED_FORCE_OFF is always true as
value is always OR with QCA808X_LED_FORCE_EN due to missing ()
resulting in the testing condition being QCA808X_LED_FORCE_EN | value.
Add the () to apply the correct condition and restore correct
functionality of the brightness ON/OFF.
Fixes: 7196062b64ee ("net: phy: at803x: add LED support for qca808x")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jakub Kicinski says:
====================
tools: ynl: auto-gen for all genetlink families
The code gen has caught up with all features required in genetlink
families in Linux 6.8 already. We have also stopped committing auto-
-generated user space code to the tree. Instead of listing all the
families in the Makefile search the spec directory, and generate
code for everything that's not legacy netlink.
====================
Link: https://lore.kernel.org/r/20240202004926.447803-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of listing the genetlink families that we want to codegen
for, always codegen for everyone. We can add an opt-out later but
it seems like most families are not causing any issues, and yet
folks forget to add them to the Makefile.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240202004926.447803-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add ovs_flow, ovs_vport and ovs_datapath to the families supported
in C. ovs-flow has some circular nesting which is fun to deal with,
but the necessary support has been added already in the previous
release cycle.
Add a sample that proves that dealing with fixed headers does
actually work correctly.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240202004926.447803-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The DPLL and mptcp_pm families are pretty clean, and YNL C codegen
supports them fully with no changes. Add them to user space codegen
so that C samples can be written, and we know immediately if changes
to these families require YNL codegen work.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240202004926.447803-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Both addrconf_verify_work() and addrconf_dad_work() acquire rtnl,
there is no point trying to have one thread per cpu.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240201173031.3654257-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We don't have to store the EEE modes to be advertised in the driver,
phylib does this for us and stores it in phydev->advertising_eee.
phylib also takes care of properly handling the EEE advertisement.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/27c336a8-ea47-483d-815b-02c45ae41da2@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A user reported that first consumer mainboards show up with a RTL8126A
5Gbps MAC/PHY. This adds support for the integrated PHY, which is also
available stand-alone. From a PHY driver perspective it's treated the
same as the 2.5Gbps PHY's, we just have to support the new PHY ID.
Reported-by: Joe Salmeri <jmscdba@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Joe Salmeri <jmscdba@gmail.com>
Link: https://lore.kernel.org/r/0c8e67ea-6505-43d1-bd51-94e7ecd6e222@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Michal Koutný says:
====================
net/sched: Load modules via alias
These modules may be loaded lazily without user's awareness and
control. Add respective aliases to modules and request them under these
aliases so that modprobe's blacklisting mechanism (through aliases)
works for them. (The same pattern exists e.g. for filesystem
modules.)
For example (before the change):
$ tc filter add dev lo parent 10: protocol ip prio 10 handle 1: cgroup
# cls_cgroup module is loaded despite a `blacklist cls_cgroup` entry
# in /etc/modprobe.d/*.conf
After the change:
$ tc filter add dev lo parent 10: protocol ip prio 10 handle 1: cgroup
Error: TC classifier not found.
We have an error talking to the kernel
# explicit/acknowledged (privileged) action is needed
$ modprobe cls_cgroup
# blacklist entry won't apply to this direct modprobe, module is
# loaded with awareness
A considered alternative was invoking `modprobe -b` always from
request_module(), however, dismissed as too intrusive and slightly
confusing in favor of the precedented aliases (the commit 7f78e0351394
("fs: Limit sys_mount to only request filesystem modules.").
User experience suffers in both alternatives. Its improvement is
orthogonal to blacklist honoring.
v1: https://lore.kernel.org/r/20231121175640.9981-1-mkoutny@suse.com
v2 https://lore.kernel.org/r/20231206192752.18989-1-mkoutny@suse.com
v3 https://lore.kernel.org/r/20240112180646.13232-1-mkoutny@suse.com
v4 https://lore.kernel.org/r/20240123135242.11430-1-mkoutny@suse.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
====================
Link: https://lore.kernel.org/r/20240201130943.19536-1-mkoutny@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The module sch_ingress stands out among net/sched modules
because it provides multiple act/sch functionalities in a single .ko.
They have aliases to make autoloading work for any of the provided
functionalities.
Since the autoloading was changed to uniformly request any functionality
under its alias, the non-systemic aliases can be removed now (i.e.
assuming the alias were only used to ensure autoloading).
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240201130943.19536-5-mkoutny@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The cls_,sch_,act_ modules may be loaded lazily during network
configuration but without user's awareness and control.
Switch the lazy loading from canonical module names to a module alias.
This allows finer control over lazy loading, the precedent from
commit 7f78e0351394 ("fs: Limit sys_mount to only request filesystem
modules.") explains it already:
Using aliases means user space can control the policy of which
filesystem^W net/sched modules are auto-loaded by editing
/etc/modprobe.d/*.conf with blacklist and alias directives.
Allowing simple, safe, well understood work-arounds to known
problematic software.
By default, nothing changes. However, if a specific module is
blacklisted (its canonical name), it won't be modprobe'd when requested
under its alias (i.e. kernel auto-loading). It would appear as if the
given module was unknown.
The module can still be loaded under its canonical name, which is an
explicit (privileged) user action.
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240201130943.19536-4-mkoutny@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No functional change intended, aliases will be used in followup commits.
Note for backporters: you may need to add aliases also for modules that
are already removed in mainline kernel but still in your version.
Patches were generated with the help of Coccinelle scripts like:
cat >scripts/coccinelle/misc/tcf_alias.cocci <<EOD
virtual patch
virtual report
@ haskernel @
@@
@ tcf_has_kind depends on report && haskernel @
identifier ops;
constant K;
@@
static struct tcf_proto_ops ops = {
.kind = K,
...
};
+char module_alias = K;
EOD
/usr/bin/spatch -D report --cocci-file scripts/coccinelle/misc/tcf_alias.cocci \
--dir . \
-I ./arch/x86/include -I ./arch/x86/include/generated -I ./include \
-I ./arch/x86/include/uapi -I ./arch/x86/include/generated/uapi \
-I ./include/uapi -I ./include/generated/uapi \
--include ./include/linux/compiler-version.h --include ./include/linux/kconfig.h \
--jobs 8 --chunksize 1 2>/dev/null | \
sed 's/char module_alias = "\([^"]*\)";/MODULE_ALIAS_NET_CLS("\1");/'
And analogously for:
static struct tc_action_ops ops = {
.kind = K,
static struct Qdisc_ops ops = {
.id = K,
(Someone familiar would be able to fit those into one .cocci file
without sed post processing.)
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240201130943.19536-3-mkoutny@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The macros are preparation for adding module aliases en mass in a
separate commit.
Although it would be tempting to create aliases like cls-foo for name
cls_foo, this could not be used because modprobe utilities treat '-' and
'_' interchangeably.
In the end, the naming follows pattern of proto modules in linux/net.h.
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240201130943.19536-2-mkoutny@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- Improve error handling in DAT and uevent generator,
by Markus Elfring (2 patches)
- Drop usage of export.h, by Sven Eckelmann
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update the list with the current maintainers of TI's CPSW ethernet
peripheral.
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Acked-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
commit 0a31bd5f2bbb ("KMEM_CACHE(): simplify slab cache creation")
introduces a new macro.
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Geetha sowjanya says:
====================
Dynamically allocate BPIDs for LBK
In current driver 64 BPIDs are reserved for LBK interfaces.
These bpids are 1-to-1 mapped to LBK interface channel numbers.
In some usecases one LBK interface required more than one bpids
and in some case they may not require at all. These usescas
can't be address with the current implementation as it always
reserves only one bpid per LBK channel.
This patch addresses this issue by creating free bpid pool from
these 64 bpids instead of 1-to-1 mapping to the lbk channel.
Now based on usecase LBK interface can request a bpid using (bp_enable()).
v1 -> v2:
- Modified commit message.
- Dropped patch2, as for now rvu netdev have no usecase. Will
be upstream along with the CPT driver.
- Addressed review comments by Simon Horman.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PCI device IDs of RVU device IDs are configurable and
RVU PF0's (ie AF's) are currently assumed as VFs that
identify loopback functionality ie LBKVFs. But in some
cases these VFs can be setup for different functionality.
Hence remove assumptions that AF's VFs are always LBK VFs
by renaming 'is_afvf' as 'is_lbkvf' explicitly and also
identify LBK VF using PCI dev ID. Similar change is done
for other VF types.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In current driver 64 BPIDs are reserved for LBK interfaces.
These bpids are 1-to-1 mapped to LBK interface channel numbers.
In some usecases one LBK interface required more than one
bpids and in some case they may not require at all.
These usescase can't be address with the current implementation
as it always reserves only one bpid per LBK channel.
This patch addresses this issue by creating free bpid pool from these
64 bpids instead of 1-to-1 mapping to the lbk channel.
Now based on usecase LBK interface can request a bpid using (bp_enable()).
This patch also reduces the number of bpids for cgx interfaces to 8
and adds proper error code
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a test case for regression in openvswitch nat that was fixed by
commit e6345d2824a3 ("netfilter: nf_nat: fix action not being set for
all ct states").
Link: https://lore.kernel.org/netdev/20231221224311.130319-1-brad@faucet.nz/
Link: https://mail.openvswitch.org/pipermail/ovs-dev/2024-January/410476.html
Suggested-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Brad Cowie <brad@faucet.nz>
Tested-by: Aaron Conole <aconole@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the led_polarity_set callback for setting LED polarity.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Christian Marangi says:
====================
net: mdio-ipq4019: fix wrong default MDC rate
This was a long journey to arrive and discover this problem.
To not waste too much char, there is a race problem with PHY and driver
probe. This was observed with Aquantia PHY firmware loading.
With some hacks the race problem was workarounded but an interesting
thing was notice. It took more than a minute for the firmware to load
via MDIO.
This was strange as the same operation was done by UBoot in at max 5
second and the same data was loaded.
A similar problem was observed on a mtk board that also had an
Aquantia PHY where the load was very slow. It was notice that the cause
was the MDIO bus running at a very low speed and the firmware
was missing a property (present in mtk sdk) that set the right frequency
to the MDIO bus.
It was fun to find that THE VERY SAME PROBLEM is present on IPQ in a
different form. The MDIO apply internally a division to the feed clock
resulting in the bus running at 390KHz instead of 6.25Mhz.
Searching around the web for some documentation and some include and
analyzing the uboot codeflow resulted in the divider being set wrongly
at /256 instead of /16 as the value was actually never set.
Applying the value restore the original load time for the Aquantia PHY.
This series mainly handle this by adding support for the "clock-frequency"
property.
Changes v3:
- Add Reviewed-by tag
- Fix english grammar error in comment
- Drop DTS patch
Changes v2:
- Use DIV_ROUND_UP
- Introduce logic to chose a default value for 802.3 spec 2.5MHz
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The IPQ4019 MDIO internally divide the clock feed by AHB based on the
MDIO_MODE reg. On reset or power up, the default value for the
divider is 0xff that reflect the divider set to /256.
This makes the MDC run at a very low rate, that is, considering AHB is
always fixed to 100Mhz, a value of 390KHz.
This hasn't have been a problem as MDIO wasn't used for time sensitive
operation, it is now that on IPQ807x is usually mounted with PHY that
requires MDIO to load their firmware (example Aquantia PHY).
To handle this problem and permit to set the correct designed MDC
frequency for the SoC add support for the standard "clock-frequency"
property for the MDIO node.
The divider supports value from /1 to /256 and the common value are to
set it to /16 to reflect 6.25Mhz or to /8 on newer platform to reflect
12.5Mhz.
To scan if the requested rate is supported by the divider, loop with
each supported divider and stop when the requested rate match the final
rate with the current divider. An error is returned if the rate doesn't
match any value.
On MDIO reset, the divider is restored to the requested value to prevent
any kind of downclocking caused by the divider reverting to a default
value.
To follow 802.3 spec of 2.5MHz of default value, if divider is set at
/256 and "clock-frequency" is not set in DT, assume nobody set the
divider and try to find the closest MDC rate to 2.5MHz. (in the case of
AHB set to 100MHz, it's 1.5625MHz)
While at is also document other bits of the MDIO_MODE reg to have a
clear idea of what is actually applied there.
Documentation of some BITs is skipped as they are marked as reserved and
their usage is not clear (RES 11:9 GENPHY 16:13 RES1 19:17)
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Document support for clock-frequency and add details on why this
property is needed and what values are supported.
From internal documentation, while other values are supported, the
correct function of the MDIO bus is not assured hence add only the
suggested supported values to the property enum.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alex Elder says:
====================
net: ipa: simplify TX power handling
In order to deliver a packet to the IPA hardware, we must ensure
it is powered. We request power by calling pm_runtime_get(), and
its return value tells us the power state. We can't block in
ipa_start_xmit(), so if power isn't enabled we prevent further
transmit attempts by calling netif_stop_queue(). Power will
eventually become enabled, at which point we call netif_wake_queue()
to allow the transmit to be retried. When it does, the power should
be enabled, so the packet delivery can proceed.
The logic that handles this is convoluted, and was put in place
to address a race condition pointed out by Jakub Kicinski during
review. The fix addressed that race, as well as another one that
was found while investigating it:
b8e36e13ea5e ("net: ipa: fix TX queue race")
I have wanted to simplify this code ever since, and I'm pleased to
report that this series implements a much better solution that
avoids both race conditions.
The first race occurs between the ->ndo_start_xmit thread and the
runtime resume thread. If we find power is not enabled when
requested in ipa_start_xmit(), we stop queueing. But there's a
chance the runtime resume will enable queuing just before that,
leaving queueing stopped forever. A flag is used to ensure that
does not occur.
A second flag is used to prevent NETDEV_TX_BUSY from being returned
repeatedly during the small window between enabling queueing and
finishing power resume. This can happen if resume was underway when
pm_runtime_get() was called and completes immediately afterward.
This condition only exists because of the use of the first flag.
The fix is to disable transmit for *every* call to ipa_start_xmit(),
disabling it *before* calling pm_runtime_get(). This leaves three
cases:
- If the return value indicates power is not active (or is in
transition), queueing remains disabled--thereby avoiding
the race between disabling it and a concurrent power thread
enabling it.
- If pm_runtime_get() returns an error, we drop the packet and
re-enable queueing.
- Finally, if the hardware is powered, we re-enable queueing
before delivering the packet to the hardware.
So the first race is avoided. And as a result, the second condition
will not occur.
The first patch adds pointers to the TX and RX IPA endpoints in the
netdev private data. The second patch has netif_stop_queue() be
called for all packets; if pm_runtime_get() indicates power is
enabled (or an error), netif_wake_queue() is called to enable it
again. The third and fourth patches get rid of the STARTED and
STOPPED IPA power flags, as well as the power spinlock, because they
are no longer needed. The last three patches just eliminate some
trivial functions, open-coding them instead.
====================
Link: https://lore.kernel.org/r/20240130192305.250915-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All ipa_power_modem_queue_wake() does is call netif_wake_queue()
on the modem netdev. There is no need to wrap that call in a
trivial function (and certainly not one defined in "ipa_power.c").
So get rid of ipa_power_modem_queue_wake(), and replace its one
caller with a direct call to netif_wake_queue(). Determine the
netdev pointer to use from the private TX endpoint's netdev pointer.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20240130192305.250915-8-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All ipa_power_modem_queue_active() does now is call netif_wake_queue().
Just call netif_wake_queue() in the two places it's needed, and get
rid of ipa_power_modem_queue_active().
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20240130192305.250915-7-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All ipa_power_modem_queue_stop() does now is call netif_stop_queue().
Just call netif_stop_queue() in the one place it's needed, and get
rid of ipa_power_modem_queue_stop().
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20240130192305.250915-6-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently the STOPPED IPA power flag is used to indicate that the
transmit queue has been stopped. Previously this was used to avoid
setting the STARTED flag unless the queue had already been stopped.
It meant transmit queuing would be enabled on resume if it was
stopped by the transmit path--and if so, it ensured it only got
enabled once.
We only stop the transmit queue in the transmit path. The STARTED
flag has been removed, and it causes no real harm to enable
transmits when they're already enabled. So we can get rid of
the STOPPED flag and call netif_wake_queue() unconditionally.
This makes the IPA power spinlock unnecessary, so it can be removed
as well.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20240130192305.250915-5-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A transmit on the modem netdev can only complete if the IPA hardware
is powered. Currently, if a transmit request arrives when the
hardware was not powered, further transmits are be stopped to allow
power-up to complete. Once power-up completes, transmits are once
again enabled.
Runtime resume can complete at the same time a transmit request is
being handled, and previously there was a race between stopping and
restarting transmits. The STARTED flag was used to ensure the
stop request in the transmit path was skipped if the start request
in the runtime resume path had already occurred.
Now, the queue is *always* stopped in the transmit path, *before*
determining whether power is ACTIVE. If power is found to already
be active (or if the socket buffer is gets dropped), transmit is
re-enabled. Otherwise it will (always) be enabled after runtime
resume completes.
The race between transmit and runtime resume no longer exists, so
there is no longer any need to maintain the STARTED flag.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20240130192305.250915-4-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are a number of flags used in the IPA driver to attempt to
manage race conditions that can occur between runtime resume and
netdev transmit. If we disable TX before requesting power, we can
avoid these races entirely, simplifying things considerably.
This patch implements the main change, disabling transmit always in
the net_device->ndo_start_xmit() callback, then re-enabling it again
whenever we find power is active (or when we drop the skb).
The patches that follow will refactor the "old" code to the point
that most of it can be eliminated.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20240130192305.250915-3-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rather than repeatedly looking up the endpoints in the name map,
save the modem TX and RX endpoint pointers in the netdev private
area.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20240130192305.250915-2-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
As Paolo promised we continue to hammer out issues in our selftests.
This is not the end but probably the peak.
Current release - regressions:
- smc: fix incorrect SMC-D link group matching logic
Current release - new code bugs:
- eth: bnxt: silence WARN() when device skips a timestamp, it happens
Previous releases - regressions:
- ipmr: fix null-deref when forwarding mcast packets
- conntrack: evaluate window negotiation only for packets in the
REPLY direction, otherwise SYN retransmissions trigger incorrect
window scale negotiation
- ipset: fix performance regression in swap operation
Previous releases - always broken:
- tcp: add sanity checks to types of pages getting into the rx
zerocopy path, we only support basic NIC -> user, no page cache
pages etc.
- ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()
- nt_tables: more input sanitization changes
- dsa: mt7530: fix 10M/100M speed on MediaTek MT7988 switch
- bridge: mcast: fix loss of snooping after long uptime, jiffies do
wrap on 32bit
- xen-netback: properly sync TX responses, protect with locking
- phy: mediatek-ge-soc: sync calibration values with MediaTek SDK,
increase connection stability
- eth: pds: fixes for various teardown, and reset races
Misc:
- hsr: silence WARN() if we can't alloc supervision frame, it
happens"
* tag 'net-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits)
doc/netlink/specs: Add missing attr in rt_link spec
idpf: avoid compiler padding in virtchnl2_ptype struct
selftests: mptcp: join: stop transfer when check is done (part 2)
selftests: mptcp: join: stop transfer when check is done (part 1)
selftests: mptcp: allow changing subtests prefix
selftests: mptcp: decrease BW in simult flows
selftests: mptcp: increase timeout to 30 min
selftests: mptcp: add missing kconfig for NF Mangle
selftests: mptcp: add missing kconfig for NF Filter in v6
selftests: mptcp: add missing kconfig for NF Filter
mptcp: fix data re-injection from stale subflow
selftests: net: enable some more knobs
selftests: net: add missing config for NF_TARGET_TTL
selftests: forwarding: List helper scripts in TEST_FILES Makefile variable
selftests: net: List helper scripts in TEST_FILES Makefile variable
selftests: net: Remove executable bits from library scripts
selftests: bonding: Check initial state
selftests: team: Add missing config options
hv_netvsc: Fix race condition between netvsc_probe and netvsc_remove
xen-netback: properly sync TX responses
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"The current exception handler, which helps on kernel accesses to
userspace, may exhibit data corruption. The problem is that it is not
guaranteed that the compiler will use the processor register we
specified in the source code, but may choose another register which
then will lead to silent register- and data corruption. To fix this
issue we now use another strategy to help the exception handler to
always find and set the error code into the correct CPU register.
The other fixes are small: fixing CPU hotplug bringup, fix the page
alignment of the RO_DATA section, added a check for the calculated
cache stride and fix possible hangups when printing longer output at
bootup when running on serial console.
Most of the patches are tagged for stable series.
- Fix random data corruption triggered by exception handler
- Fix crash when setting up BTLB at CPU bringup
- Prevent hung tasks when printing inventory on serial console
- Make RO_DATA page aligned in vmlinux.lds.S
- Add check for valid cache stride size"
* tag 'parisc-for-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: BTLB: Fix crash when setting up BTLB at CPU bringup
parisc: Fix random data corruption from exception handler
parisc: Drop unneeded semicolon in parse_tree_node()
parisc: Prevent hung tasks when printing inventory on serial console
parisc: Check for valid stride size for cache flushes
parisc: Make RO_DATA page aligned in vmlinux.lds.S
|
