summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-06-20ARM: dts: imx6q-apalis: Add ov5640 mipi csi cameraOleksandr Suvorov1-1/+66
The Apalis iMX6 modules allow connecting a mipi-csi video input. Add support for our OV5640 camera module but have it disabled. This allows to enable it in an overlay per the current system configuration. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-20ARM: dts: imx6q-apalis: Disable stmpe touchscreenOleksandr Suvorov1-1/+2
Unify its label with other toradex SoM dtbs. This allows to enable it in an overlay per the current system configuration. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-20ARM: dts: imx6q-apalis: Disable HDMIMax Krummenacher3-12/+0
This allows to enable it in an overlay per the current system configuration. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-20ARM: dts: imx6q-apalis: Add LVDS panel supportOleksandr Suvorov4-12/+36
Add LVDS panel and endpoint linkage support but keep the inherited disabled state. This allows to enable it in an overlay per the current system configuration. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-20ARM: dts: imx6q-apalis: move gpio-keys to SoM dtsiMax Krummenacher3-28/+14
Move gpio-keys to module-level device tree given it is standard Apalis functionality. Sort properties alphabetical. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-20ARM: dts: imx6q-apalis: Move Atmel MXT touch ctrl to SoM dtsiMax Krummenacher4-39/+11
Reduces code duplication. While at it drop the comments which do not apply on Apalis iMX6 but add the correct SoM pin names. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-20ARM: dts: imx6q-apalis: Move pinmux groups to SoM dtsiOleksandr Suvorov4-30/+8
GPIO pinmux groups are declared on the module level. Move muxing them to the same level. It also reduces code duplication. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-20ARM: dts: imx6q-apalis: Move parallel rgb interface to SoM dtsiOleksandr Suvorov4-164/+55
Move all Parallel RGB-related nodes to the module level and disable it by default. This allows to enable it in an overlay per the current system configuration. Update SPDX-License spelling to latest convention. Update Copyright year. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-20ARM: dts: imx6q-apalis: Command pmic to standby for poweroffMax Krummenacher1-0/+5
The Apalis iMX6 HW doesn't allow to use the PWR_ON_REQ signal for poweroff. Use the fsl,pmic-stby-poweroff property to command the PMIC into a low power mode in poweroff. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-20ARM: dts: imx6q-apalis: Add gpio-line-namesMax Krummenacher1-0/+193
Add GPIO line names on module level. Those are all GPIOs which a user might use on his custom carrier board. If more meaningful names are available on the carrier board, the user can overwrite the line names in the carrier board level device tree. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-20Revert "ARM: dts: imx6qdl-apalis: Avoid underscore in node name"Max Krummenacher1-2/+2
The STMPE MFD device binding requires the child node to have a fixed name, i.e. with '_', not '-'. Otherwise the stmpe_adc, stmpe_touchscreen drivers will not be probed. Fixes: 56086b5e804f ("ARM: dts: imx6qdl-apalis: Avoid underscore in node name") Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-20ARM: dts: imx: Pass a label to the AIPS nodesFabio Estevam7-12/+12
Pass a label to the AIPS nodes to make it easier to reference it from other devicetree files. Some i.MX dtsi files already describe labels for the AIPS nodes. Make it available for all SoCs for consistency. U-Boot, for example usually needs to access the AIPS node to pass U-Boot-specific properties. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-20ARM: dts: imx: Pass a label to the soc nodeFabio Estevam14-14/+14
Pass a label to the 'soc' node to make it easier to reference it from other devicetree files. U-Boot, for example usually needs to access the AIPS node to pass U-Boot-specific properties. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-19ARM: dts: imx6ul: fix qspi node compatibleAlexander Stein1-1/+1
imx6ul is not compatible to imx6sx, both have different erratas. Fixes the dt_binding_check warning: spi@21e0000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx6ul-qspi', 'fsl,imx6sx-qspi'] is too long Additional items are not allowed ('fsl,imx6sx-qspi' was unexpected) 'fsl,imx6ul-qspi' is not one of ['fsl,ls1043a-qspi'] 'fsl,imx6ul-qspi' is not one of ['fsl,imx8mq-qspi'] 'fsl,ls1021a-qspi' was expected 'fsl,imx7d-qspi' was expected Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-19ARM: dts: imx6ul: fix lcdif node compatibleAlexander Stein1-1/+1
In yaml binding "fsl,imx6ul-lcdif" is listed as compatible to imx6sx-lcdif, but not imx28-lcdif. Change the list accordingly. Fixes the dt_binding_check warning: lcdif@21c8000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx6ul-lcdif', 'fsl,imx28-lcdif'] is too long Additional items are not allowed ('fsl,imx28-lcdif' was unexpected) 'fsl,imx6ul-lcdif' is not one of ['fsl,imx23-lcdif', 'fsl,imx28-lcdif', 'fsl,imx6sx-lcdif'] 'fsl,imx6sx-lcdif' was expected Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-19ARM: dts: imx6ul: fix csi node compatibleAlexander Stein1-1/+1
"fsl,imx6ul-csi" was never listed as compatible to "fsl,imx7-csi", neither in yaml bindings, nor previous txt binding. Remove the imx7 part. Fixes the dt schema check warning: csi@21c4000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx6ul-csi', 'fsl,imx7-csi'] is too long Additional items are not allowed ('fsl,imx7-csi' was unexpected) 'fsl,imx8mm-csi' was expected Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-19ARM: dts: imx6ul: fix keypad compatibleAlexander Stein1-1/+1
According to binding, the compatible shall only contain imx6ul and imx21 compatibles. Fixes the dt_binding_check warning: keypad@20b8000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx6ul-kpp', 'fsl,imx6q-kpp', 'fsl,imx21-kpp'] is too long Additional items are not allowed ('fsl,imx6q-kpp', 'fsl,imx21-kpp' were unexpected) Additional items are not allowed ('fsl,imx21-kpp' was unexpected) 'fsl,imx21-kpp' was expected Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-19ARM: dts: imx6ul: change operating-points to uint32-matrixAlexander Stein1-12/+10
operating-points is a uint32-matrix as per opp-v1.yaml. Change it accordingly. While at it, change fsl,soc-operating-points as well, although there is no bindings file (yet). But they should have the same format. Fixes the dt_binding_check warning: cpu@0: operating-points:0: [696000, 1275000, 528000, 1175000, 396000, 1025000, 198000, 950000] is too long cpu@0: operating-points:0: Additional items are not allowed (528000, 1175000, 396000, 1025000, 198000, 950000 were unexpected) Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-19ARM: dts: imx6ul: add missing properties for sramAlexander Stein1-0/+3
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning: sram@900000: '#address-cells' is a required property sram@900000: '#size-cells' is a required property sram@900000: 'ranges' is a required property Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-19ARM: dts: imx6: fix node names for ebook reader keysAndreas Kemnade3-10/+10
Node names are supposed to start with key- Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-19ARM: dts: imx6sl-tolino-shine2hd: fix led node name.Andreas Kemnade1-1/+1
Node name is supposed to be led or led-x Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-19ARM: dts: imx6: skov: add pwm-regulator to control the panel's VCOMUlrich Ölmann2-0/+16
Skov's i.MX6 based boards come in different flavors which have different panels attached. For optimal contrast experience each panel type needs an individual common voltage (VCOM) to drive its TFT backplane. The latter is generated by an LCD bias supply IC controlled by a pwm as input signal. Introduce a pwm- regulator to describe this hardware property and parameterize it appropriately for the different boards. Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-12ARM: imx6ul: drop the adc num-channels propertyBaruch Siach4-8/+0
The mainline vf610_adc driver never used this property. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-12ARM: dts: fsl: adjust whitespace around '='Krzysztof Kozlowski12-14/+14
Fix whitespace coding style: use single space instead of tabs or multiple spaces around '=' sign in property assignment. No functional changes (same DTB). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-11ARM: dts: imx6ulz-bsh-smm-m2: Support proper board power offSimon Holesch1-0/+4
Supports initiating poweroff on SNVS_PMIC_ON_REQ signal. Signed-off-by: Simon Holesch <simon.holesch@bshg.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-11ARM: dts: imx7-colibri: add support for Toradex Iris carrier boardsMarcel Ziswiler9-0/+536
Add support for Toradex Iris, small form-factor Pico-ITX Colibri Arm Computer Module family Carrier Board. Additional details available at https://www.toradex.com/products/carrier-board/iris-carrier-board Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-11ARM: dts: imx7-colibri: clean-up iomuxc pinctrl group namingMarcel Ziswiler1-35/+35
Clean-up iomuxc pinctrl group naming. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-11ARM: dts: imx7-colibri: set regulator-name propertiesMarcel Ziswiler1-9/+18
Migrate comments to proper regulator-name properties. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-11ARM: dts: imx7-colibri: remove leading zero from reg addressMarcel Ziswiler1-1/+1
Remove the unnecessary leading zero from the reg address. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-11ARM: dts: imx7-colibri: clean-up device enabling/disablingMarcel Ziswiler2-6/+0
Disable most nodes on module-level to be enabled on carrier board-level. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-11ARM: dts: imx7-colibri: alphabetical re-orderMarcel Ziswiler2-188/+186
Alphabetically re-order device tree iomuxc pinctrl pads, nodes and properties. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-11ARM: dts: imx7-colibri: add clarifying commentsMarcel Ziswiler11-63/+121
- Add clarifying comments. - Remove spurious new line. - Add required new line. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-11ARM: dts: imx7-colibri-aster: add ssp aka spi cs aka ss pinsMarcel Ziswiler1-0/+10
Add Colibri SSP aka SPI chip select (CS) aka slave select (SS) pins as either used on Arduino UNO compatible header X18 or Raspberry Pi compatible header X20. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-11ARM: dts: imx7-colibri: disable adc2Marcel Ziswiler3-13/+2
ADC2 is not available as it conflicts with the AD7879 resistive touchscreen. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-11ARM: dts: imx7-colibri-eval-v3: correct can controller commentMarcel Ziswiler1-1/+1
Correct CAN controller comment. It is a MCP2515 rather than a mpc258x. Fixes: 66d59b678a87 ("ARM: dts: imx7-colibri: add MCP2515 CAN controller") Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-11ARM: dts: imx7d-colibri-emmc: add cpu1 supplyMarcel Ziswiler1-0/+4
Each cpu-core is supposed to list its supply separately, add supply for cpu1. Fixes: 2d7401f8632f ("ARM: dts: imx7d: Add cpu1 supply") Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-11ARM: dts: imx7-colibri: move rtc nodeMarcel Ziswiler3-12/+17
Move I2C RTC to module-level to be enabled on carrier board-level. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-11ARM: dts: imx7-colibri: clean-up usdhc1 and add sleep configMarcel Ziswiler3-32/+51
Adding no-1-8-v property to usdhc1 to disable +1.8V signaling (UHS-I) mode on SoM dtsi level. Clean up no-1-8-v from Aster carrier board dtsi, which is using defaults from SoM dtsi and is not UHS-I capable. A carrier board may have a MMC/SD card slot with a switchable power supply. Add a pinctrl sleep used when the card power is off to avoid backfeeding to the card and add the "sleep" pinctrl to the usdhc1 controller. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-11ARM: dts: imx7-colibri: add delay for on-module phy supplyOleksandr Suvorov1-2/+13
There is a significant time required for PHY Micrel KSZ8041 to power up. Add a delay on start-up/wake-up before the FEC starts communicating with the PHY. LDO1 takes 6 ms, R39 + C44 takes ~100ms, the KSZ8041 datasheet asks for ~11 ms before starting any programming on the MIIM. Counting that, add a 200 ms delay to be sure the PHY is ready for programming. Also, add the same off delay time to give the capacitor time to discharge in order to properly reset. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-11ARM: dts: imx7-colibri: move regulatorsMarcel Ziswiler9-62/+35
Move regulators to module-level device tree given they are standard Colibri functionalities. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-11ARM: dts: imx7-colibri: add ethernet aliasesMax Krummenacher2-0/+12
Add Ethernet aliases which is required to properly pass MAC address from bootloader. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-11ARM: dts: imx7-colibri: move aliases, chosen, extcon and gpio-keysMarcel Ziswiler3-49/+32
Move aliases, chosen, extcon and gpio-keys to module-level device tree given they are standard Colibri functionalities. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-11ARM: dts: imx7-colibri: improve wake-up with gpio keyOleksandr Suvorov2-2/+2
The pin GPIO1_IO01 externally pulls down, it is required to sequentially connect this pin (signal WAKE_MICO#) to +3v3 and then disconnect it to trigger a wakeup interrupt. Adding the flag GPIO_PULL_DOWN allows the system to be woken up just connecting the pin GPIO1_IO01 to +3v3. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-11ARM: dts: imx7-colibri: improve licensing and compatible stringsOleksandr Suvorov12-31/+38
Migrate to the latest SPDX license identifier, update copyright period and improve compatible strings. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-11ARM: dts: imx7-colibri: add usb dual-role switching using extconPhilippe Schenker2-3/+10
Add USB dual-role switching using extcon. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-11ARM: dts: imx7-colibri: set lcdif clock source to video pllStefan Agner1-0/+2
Use the video PLL as clock source to assure proper pixel clock generation. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-11ARM: dts: imx7-colibri: add mdio phy nodeMarcel Ziswiler1-11/+24
Add the MDIO bus with the respective PHY to allow for making changes to that easier. While at it also alphabetically re-order properties and improve indentation. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-11ARM: dts: imx7-colibri: overhaul display/touch functionalityMarcel Ziswiler7-121/+197
Rename display interface to match other modules to make it easier to use device tree overlays. The parallel RGB interface (lcdif) and all related stuff turn on in a device tree overlay. Keep them disabled in the main devicetree. As these subsystems are provided by module and not a part of boards, move their definitions into the module-level devicetree. Disable ad7879 touchscreen which turns on in a devic tree overlay. Remains it disabled in the main devicetree. Move Atmel MXT capacitive touch controller device tree nodes from carrier board to module level and add iomux pinctl groups for both the Capacitive Touch Adapter (using SODIMM 28/30) and the capacitive touch connector as found on later carrier boards (using SODIMM 106/107). Keep touchscreen and display nodes enabled for NAND based i.MX 7 modules, since device tree overlays are not yet supported. For the Colibri Evaluation Board keep the Capacitive Touch Adapter node disabled and PWM2, PWM3 enabled instead. For eMMC based modules keep nodes disabled to work in conjunction with device tree overlays. Add the iomuxc pinctrl group for the LVDS transceiver related signals to use it in a device tree overlay. While at it also alphabetically re=order them properties. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-11ARM: dts: imx6qdl-colibri: backlight pwm: Adapt brightness stepsMax Krummenacher1-2/+2
Adapt the brightness steps as the backlight doesn't light up for very low duty cycles. Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-11ARM: dts: imx6qdl-colibri: backlight pwm: Simplify inverted backlightMax Krummenacher1-4/+4
Set #pwm-cells to the default 3 to gain access to the parameter which allows inverting the PWM signal. This is useful to specify a backlight which has its highest brightness at 0. With the change to use the PWM with inverted polarity the PWM signal is inverted to how it was before this patch. This changes the meaning of the values in the brightness-levels property. I.e. the duty-cycle changes from x/255 to (255-x)/255. Keeping the brightness-levels will then have a big brightness jump from 0 to 127 duty cycle, the other 6 steps will then be barely noticeable. Change the brightness-levels to provide the same brightness-levels as before. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-24 15:52:23 +0300