summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-03-23iwlwifi: don't send GEO_TX_POWER_LIMIT if no wgds tableGolan Ben Ami3-13/+24
The GEO_TX_POWER_LIMIT command was sent although there is no wgds table, so the fw got wrong SAR values from the driver. Fix this by avoiding sending the command if no wgds tables are available. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Fixes: 39c1a9728f93 ("iwlwifi: refactor the SAR tables from mvm to acpi") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Tested-By: Jonathan McDowell <noodles@earth.li> Tested-by: Len Brown <len.brown@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20200318081237.46db40617cc6.Id5cf852ec8c5dbf20ba86bad7b165a0c828f8b2e@changeid
2020-03-23iwlwifi: pcie: add 0x2526/0x401* devices back to cfg detectionLuca Coelho1-0/+3
Three devices, with PCI device ID 0x2526 and subdevice IDs 0x4010, 0x4018 and 0x401C were removed accidentally. Add them back. Reported-by: Brett Hassal <brett.hassal@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206661 Fixes: 0b295a1eb81f ("iwlwifi: add device name to device_info") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20200317123331.16762b29f26c.I928bcaa799e7b3d33838c0667714eeb9fa665290@changeid
2020-03-23KVM: LAPIC: Mark hrtimer for period or oneshot mode to expire in hard ↵He Zhe1-1/+1
interrupt context apic->lapic_timer.timer was initialized with HRTIMER_MODE_ABS_HARD but started later with HRTIMER_MODE_ABS, which may cause the following warning in PREEMPT_RT kernel. WARNING: CPU: 1 PID: 2957 at kernel/time/hrtimer.c:1129 hrtimer_start_range_ns+0x348/0x3f0 CPU: 1 PID: 2957 Comm: qemu-system-x86 Not tainted 5.4.23-rt11 #1 Hardware name: Supermicro SYS-E300-9A-8C/A2SDi-8C-HLN4F, BIOS 1.1a 09/18/2018 RIP: 0010:hrtimer_start_range_ns+0x348/0x3f0 Code: 4d b8 0f 94 c1 0f b6 c9 e8 35 f1 ff ff 4c 8b 45 b0 e9 3b fd ff ff e8 d7 3f fa ff 48 98 4c 03 34 c5 a0 26 bf 93 e9 a1 fd ff ff <0f> 0b e9 fd fc ff ff 65 8b 05 fa b7 90 6d 89 c0 48 0f a3 05 60 91 RSP: 0018:ffffbc60026ffaf8 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff9d81657d4110 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000006cc7987bcf RDI: ffff9d81657d4110 RBP: ffffbc60026ffb58 R08: 0000000000000001 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000000 R12: 0000006cc7987bcf R13: 0000000000000000 R14: 0000006cc7987bcf R15: ffffbc60026d6a00 FS: 00007f401daed700(0000) GS:ffff9d81ffa40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000ffffffff CR3: 0000000fa7574000 CR4: 00000000003426e0 Call Trace: ? kvm_release_pfn_clean+0x22/0x60 [kvm] start_sw_timer+0x85/0x230 [kvm] ? vmx_vmexit+0x1b/0x30 [kvm_intel] kvm_lapic_switch_to_sw_timer+0x72/0x80 [kvm] vmx_pre_block+0x1cb/0x260 [kvm_intel] ? vmx_vmexit+0xf/0x30 [kvm_intel] ? vmx_vmexit+0x1b/0x30 [kvm_intel] ? vmx_vmexit+0xf/0x30 [kvm_intel] ? vmx_vmexit+0x1b/0x30 [kvm_intel] ? vmx_vmexit+0xf/0x30 [kvm_intel] ? vmx_vmexit+0x1b/0x30 [kvm_intel] ? vmx_vmexit+0xf/0x30 [kvm_intel] ? vmx_vmexit+0xf/0x30 [kvm_intel] ? vmx_vmexit+0x1b/0x30 [kvm_intel] ? vmx_vmexit+0xf/0x30 [kvm_intel] ? vmx_vmexit+0x1b/0x30 [kvm_intel] ? vmx_vmexit+0xf/0x30 [kvm_intel] ? vmx_vmexit+0x1b/0x30 [kvm_intel] ? vmx_vmexit+0xf/0x30 [kvm_intel] ? vmx_vmexit+0x1b/0x30 [kvm_intel] ? vmx_vmexit+0xf/0x30 [kvm_intel] ? vmx_sync_pir_to_irr+0x9e/0x100 [kvm_intel] ? kvm_apic_has_interrupt+0x46/0x80 [kvm] kvm_arch_vcpu_ioctl_run+0x85b/0x1fa0 [kvm] ? _raw_spin_unlock_irqrestore+0x18/0x50 ? _copy_to_user+0x2c/0x30 kvm_vcpu_ioctl+0x235/0x660 [kvm] ? rt_spin_unlock+0x2c/0x50 do_vfs_ioctl+0x3e4/0x650 ? __fget+0x7a/0xa0 ksys_ioctl+0x67/0x90 __x64_sys_ioctl+0x1a/0x20 do_syscall_64+0x4d/0x120 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f4027cc54a7 Code: 00 00 90 48 8b 05 e9 59 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b9 59 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007f401dae9858 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00005558bd029690 RCX: 00007f4027cc54a7 RDX: 0000000000000000 RSI: 000000000000ae80 RDI: 000000000000000d RBP: 00007f4028b72000 R08: 00005558bc829ad0 R09: 00000000ffffffff R10: 00005558bcf90ca0 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 00005558bce1c840 --[ end trace 0000000000000002 ]-- Signed-off-by: He Zhe <zhe.he@windriver.com> Message-Id: <1584687967-332859-1-git-send-email-zhe.he@windriver.com> Reviewed-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-23KVM: SVM: Issue WBINVD after deactivating an SEV guestTom Lendacky1-8/+14
Currently, CLFLUSH is used to flush SEV guest memory before the guest is terminated (or a memory hotplug region is removed). However, CLFLUSH is not enough to ensure that SEV guest tagged data is flushed from the cache. With 33af3a7ef9e6 ("KVM: SVM: Reduce WBINVD/DF_FLUSH invocations"), the original WBINVD was removed. This then exposed crashes at random times because of a cache flush race with a page that had both a hypervisor and a guest tag in the cache. Restore the WBINVD when destroying an SEV guest and add a WBINVD to the svm_unregister_enc_region() function to ensure hotplug memory is flushed when removed. The DF_FLUSH can still be avoided at this point. Fixes: 33af3a7ef9e6 ("KVM: SVM: Reduce WBINVD/DF_FLUSH invocations") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Message-Id: <c8bf9087ca3711c5770bdeaafa3e45b717dc5ef4.1584720426.git.thomas.lendacky@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-23ceph: fix memory leak in ceph_cleanup_snapid_map()Luis Henriques1-0/+1
kmemleak reports the following memory leak: unreferenced object 0xffff88821feac8a0 (size 96): comm "kworker/1:0", pid 17, jiffies 4294896362 (age 20.512s) hex dump (first 32 bytes): a0 c8 ea 1f 82 88 ff ff 00 c9 ea 1f 82 88 ff ff ................ 00 00 00 00 00 00 00 00 00 01 00 00 00 00 ad de ................ backtrace: [<00000000b3ea77fb>] ceph_get_snapid_map+0x75/0x2a0 [<00000000d4060942>] fill_inode+0xb26/0x1010 [<0000000049da6206>] ceph_readdir_prepopulate+0x389/0xc40 [<00000000e2fe2549>] dispatch+0x11ab/0x1521 [<000000007700b894>] ceph_con_workfn+0xf3d/0x3240 [<0000000039138a41>] process_one_work+0x24d/0x590 [<00000000eb751f34>] worker_thread+0x4a/0x3d0 [<000000007e8f0d42>] kthread+0xfb/0x130 [<00000000d49bd1fa>] ret_from_fork+0x3a/0x50 A kfree is missing while looping the 'to_free' list of ceph_snapid_map objects. Cc: stable@vger.kernel.org Fixes: 75c9627efb72 ("ceph: map snapid to anonymous bdev ID") Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-03-23libceph: fix alloc_msg_with_page_vector() memory leaksIlya Dryomov3-16/+14
Make it so that CEPH_MSG_DATA_PAGES data item can own pages, fixing a bunch of memory leaks for a page vector allocated in alloc_msg_with_page_vector(). Currently, only watch-notify messages trigger this allocation, and normally the page vector is freed either in handle_watch_notify() or by the caller of ceph_osdc_notify(). But if the message is freed before that (e.g. if the session faults while reading in the message or if the notify is stale), we leak the page vector. This was supposed to be fixed by switching to a message-owned pagelist, but that never happened. Fixes: 1907920324f1 ("libceph: support for sending notifies") Reported-by: Roman Penyaev <rpenyaev@suse.de> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Roman Penyaev <rpenyaev@suse.de>
2020-03-23ceph: check POOL_FLAG_FULL/NEARFULL in addition to OSDMAP_FULL/NEARFULLIlya Dryomov4-5/+28
CEPH_OSDMAP_FULL/NEARFULL aren't set since mimic, so we need to consult per-pool flags as well. Unfortunately the backwards compatibility here is lacking: - the change that deprecated OSDMAP_FULL/NEARFULL went into mimic, but was guarded by require_osd_release >= RELEASE_LUMINOUS - it was subsequently backported to luminous in v12.2.2, but that makes no difference to clients that only check OSDMAP_FULL/NEARFULL because require_osd_release is not client-facing -- it is for OSDs Since all kernels are affected, the best we can do here is just start checking both map flags and pool flags and send that to stable. These checks are best effort, so take osdc->lock and look up pool flags just once. Remove the FIXME, since filesystem quotas are checked above and RADOS quotas are reflected in POOL_FLAG_FULL: when the pool reaches its quota, both POOL_FLAG_FULL and POOL_FLAG_FULL_QUOTA are set. Cc: stable@vger.kernel.org Reported-by: Yanhu Cao <gmayyyha@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Acked-by: Sage Weil <sage@redhat.com>
2020-03-23i2c: fix a doc warningMauro Carvalho Chehab1-2/+2
Don't let non-letters inside a literal block without escaping it, as the toolchain would mis-interpret it: ./include/linux/i2c.h:518: WARNING: Inline strong start-string without end-string. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-23ARM: dts: oxnas: Fix clear-mask propertySungbo Eo2-4/+4
Disable all rps-irq interrupts during driver initialization to prevent an accidental interrupt on GIC. Fixes: 84316f4ef141 ("ARM: boot: dts: Add Oxford Semiconductor OX810SE dtsi") Fixes: 38d4a53733f5 ("ARM: dts: Add support for OX820 and Pogoplug V3") Signed-off-by: Sungbo Eo <mans0n@gorani.run> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-03-23dmaengine: ti: k3-udma-glue: Fix an error handling path in ↵Christophe JAILLET1-10/+19
'k3_udma_glue_cfg_rx_flow()' All but one error handling paths in the 'k3_udma_glue_cfg_rx_flow()' function 'goto err' and call 'k3_udma_glue_release_rx_flow()'. This not correct because this function has a 'channel->flows_ready--;' at the end, but 'flows_ready' has not been incremented here, when we branch to the error handling path. In order to keep a correct value in 'flows_ready', un-roll 'k3_udma_glue_release_rx_flow()', simplify it, add some labels and branch at the correct places when an error is detected. Doing so, we also NULLify 'flow->udma_rflow' in a path that was lacking it. Fixes: d70241913413 ("dmaengine: ti: k3-udma: Add glue layer for non DMAengine user") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200318191209.1267-1-christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-23MAINTAINERS: Add maintainer for HiSilicon DMA engine driverZhou Wang1-0/+6
Add myself as the maintainer of HiSilicon DMA engine driver. Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Link: https://lore.kernel.org/r/1584062624-196854-1-git-send-email-wangzhou1@hisilicon.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-23dmaengine: idxd: fix off by one on cdev dwq refcountDave Jiang1-2/+2
The refcount check for dedicated workqueue (dwq) is off by one and allows more than 1 user to open the char device. Fix check so only a single user can open the device. Fixes: 42d279f9137a ("dmaengine: idxd: add char driver to expose submission portal to userland") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/158403020187.10208.14117394394540710774.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-23Linux 5.6-rc7v5.6-rc7Linus Torvalds1-1/+1
2020-03-23ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitationsNicolas Saenz Julienne1-0/+1
The bus is virtual and devices have to inherit their DMA constraints from the underlying interconnect. So add an empty dma-ranges property to the bus node, implying the firmware bus' DMA constraints are identical to its parent's. Fixes: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-03-22Merge tag 'for-5.6-rc6-tag' of ↵Linus Torvalds2-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "Two fixes. The first is a regression: when dropping some incompat bits the conditions were reversed. The other is a fix for rename whiteout potentially leaving stack memory linked to a list" * tag 'for-5.6-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix removal of raid[56|1c34} incompat flags after removing block group btrfs: fix log context list corruption after rename whiteout error
2020-03-22Merge branch 'akpm' (patches from Andrew)Linus Torvalds13-78/+164
Merge misc fixes from Andrew Morton: "10 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: x86/mm: split vmalloc_sync_all() mm, slub: prevent kmalloc_node crashes and memory leaks mm/mmu_notifier: silence PROVE_RCU_LIST warnings epoll: fix possible lost wakeup on epoll_ctl() path mm: do not allow MADV_PAGEOUT for CoW pages mm, memcg: throttle allocators based on ancestral memory.high mm, memcg: fix corruption on 64-bit divisor in memory.high throttling page-flags: fix a crash at SetPageError(THP_SWAP) mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case memcg: fix NULL pointer dereference in __mem_cgroup_usage_unregister_event
2020-03-22i2c: hix5hd2: add missed clk_disable_unprepare in removeChuhong Yuan1-0/+1
The driver forgets to disable and unprepare clk when remove. Add a call to clk_disable_unprepare to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2020-03-22ath10k: Fill GCMP MIC length for PMFYingying Tang4-8/+48
GCMP MIC length is not filled for GCMP/GCMP-256 cipher suites in PMF enabled case. Due to mismatch in MIC length, deauth/disassoc frames are unencrypted. This patch fills proper MIC length for GCMP/GCMP-256 cipher suites. Tested HW: QCA9984, QCA9888 Tested FW: 10.4-3.6-00104 Signed-off-by: Yingying Tang <yintang@codeaurora.org> Co-developed-by: Sowmiya Sree Elavalagan <ssreeela@codeaurora.org> Signed-off-by: Sowmiya Sree Elavalagan <ssreeela@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-03-22selftests/net: add definition for SOL_DCCP to fix compilation errors for old ↵Alan Maguire1-0/+4
libc Many systems build/test up-to-date kernels with older libcs, and an older glibc (2.17) lacks the definition of SOL_DCCP in /usr/include/bits/socket.h (it was added in the 4.6 timeframe). Adding the definition to the test program avoids a compilation failure that gets in the way of building tools/testing/selftests/net. The test itself will work once the definition is added; either skipping due to DCCP not being configured in the kernel under test or passing, so there are no other more up-to-date glibc dependencies here it seems beyond that missing definition. Fixes: 11fb60d1089f ("selftests: net: reuseport_addr_any: add DCCP") Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22Merge branch 'net-hns3-add-three-optimizations-for-mailbox-handling'David S. Miller5-386/+420
Huazhong Tan says: ==================== net: hns3: add three optimizations for mailbox handling This patchset includes three code optimizations for mailbox handling. [patch 1] adds a response code conversion. [patch 2] refactors some structure definitions about PF and VF mailbox. [patch 3] refactors the condition whether PF responds VF's mailbox. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22net: hns3: refactor mailbox response scheme between PF and VFHuazhong Tan3-155/+113
Currently, PF responds to VF depending on what mailbox it is handling, it is a bit inflexible. The correct way is, PF should check the mbx_need_resp field to decide whether gives response to VF. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22net: hns3: refactor the mailbox message between PF and VFYufeng Mo5-234/+291
For making the code more readable, this adds several new structure to replace the msg field in structure hclge_mbx_vf_to_pf_cmd and hclge_mbx_pf_to_vf_cmd. Also uses macro to instead of some magic number. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22net: hns3: add a conversion for mailbox's response codeJian Shen2-2/+21
Currently, when mailbox handling fails, the PF driver just responds 1 to the VF driver. It is not sufficient for the VF driver to find out why its mailbox fails. So the error should be responded to VF, but the error is type int and the response field in struct hclge_mbx_pf_to_vf_cmd is type u16, a conversion is needed. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22mptcp: Remove set but not used variable 'can_ack'YueHaibing1-2/+0
Fixes gcc '-Wunused-but-set-variable' warning: net/mptcp/options.c: In function 'mptcp_established_options_dss': net/mptcp/options.c:338:7: warning: variable 'can_ack' set but not used [-Wunused-but-set-variable] commit dc093db5cc05 ("mptcp: drop unneeded checks") leave behind this unused, remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22net: bcmgenet: always enable status blocksDoug Berger2-97/+38
The hardware offloading of the NETIF_F_HW_CSUM and NETIF_F_RXCSUM features requires the use of Transmit Status Blocks before transmit frame data and Receive Status Blocks before receive frame data to carry the checksum information. Unfortunately, these status blocks are currently only enabled when the NETIF_F_HW_CSUM feature is enabled. As a result NETIF_F_RXCSUM will not actually be offloaded to the hardware unless both it and NETIF_F_HW_CSUM are enabled. Fortunately, that is the default configuration. This commit addresses this issue by always enabling the use of status blocks on both transmit and receive frames. Further, it replaces the use of a dedicated flag within the driver private data structure with direct use of the netdev features flags. Fixes: 810155397890 ("net: bcmgenet: use CHECKSUM_COMPLETE for NETIF_F_RXCSUM") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22Merge branch 'selftests-expand-txtimestamp-with-new-features'David S. Miller2-23/+187
Jian Yang says: ==================== selftests: expand txtimestamp with new features Current txtimestamp selftest issues requests with no delay, or fixed 50 usec delay. Nsec granularity is useful to measure fine-grained latency. A configurable delay is useful to simulate the case with cold cachelines. This patchset adds new flags and features to the txtimestamp selftest, including: - Printing in nsec (-N) - Polling interval (-b, -S) - Using epoll (-E, -e) - Printing statistics - Running individual tests in txtimestamp.sh ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22selftests: txtimestamp: print statistics for timestamp events.Jian Yang1-0/+58
Statistics on timestamps is useful to quantify average and tail latency. Print timestamp statistics in count/avg/min/max format. Signed-off-by: Jian Yang <jianyang@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22selftests: txtimestamp: add support for epoll().Jian Yang1-5/+48
Add the following new flags: -e: use level-triggered epoll() instead of poll(). -E: use event-triggered epoll() instead of poll(). Signed-off-by: Jian Yang <jianyang@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22selftests: txtimestamp: add new command-line flags.Jian Yang1-9/+15
A longer sleep duration between sendmsg()s makes more cachelines to be evicted and results in higher latency. Making the duration configurable. Add the following new flags: -S: Configurable sleep duration. -b: Busy loop instead of poll(). Remove the following flag: -D: No delay between packets: subsumed by -S. Signed-off-by: Jian Yang <jianyang@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22selftests: txtimestamp: allow printing latencies in nsec.Jian Yang1-12/+44
Txtimestamp reports latencies in uses resolution, while nsec is needed in cases such as measuring latencies on localhost. Add the following new flag: -N: print timestamps and durations in nsec (instead of usec) Signed-off-by: Jian Yang <jianyang@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22selftests: txtimestamp: allow individual txtimestamp tests.Jian Yang1-3/+28
The wrapper script txtimestamp.sh executes a pre-defined list of testcases sequentially without configuration options available. Add an option (-r/--run) to setup the test namespace and pass remaining arguments to txtimestamp binary. The script still runs all tests when no argument is passed. Signed-off-by: Jian Yang <jianyang@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22net: phy: dp83867: w/a for fld detect threshold bootstrapping issueGrygorii Strashko1-1/+20
When the DP83867 PHY is strapped to enable Fast Link Drop (FLD) feature STRAP_STS2.STRAP_ FLD (reg 0x006F bit 10), the Energy Lost Threshold for FLD Energy Lost Mode FLD_THR_CFG.ENERGY_LOST_FLD_THR (reg 0x002e bits 2:0) will be defaulted to 0x2. This may cause the phy link to be unstable. The new DP83867 DM recommends to always restore ENERGY_LOST_FLD_THR to 0x1. Hence, restore default value of FLD_THR_CFG.ENERGY_LOST_FLD_THR to 0x1 when FLD is enabled by bootstrapping as recommended by DM. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22Merge branch 'net-tls-Annotate-lockless-access-to-sk_prot'David S. Miller2-14/+16
Jakub Sitnicki says: ==================== net/tls: Annotate lockless access to sk_prot We have recently noticed that there is a case of lockless read/write to sk->sk_prot [0]. sockmap code on psock tear-down writes to sk->sk_prot, while holding sk_callback_lock. Concurrently, tcp can access it. Usually to read out the sk_prot pointer and invoke one of the ops, sk->sk_prot->handler(). The lockless write (lockless in regard to concurrent reads) happens on the following paths: tcp_bpf_{recvmsg|sendmsg} / sock_map_unref sk_psock_put sk_psock_drop sk_psock_restore_proto WRITE_ONCE(sk->sk_prot, proto) To prevent load/store tearing [1], and to make tooling aware of intentional shared access [2], we need to annotate sites that access sk_prot with READ_ONCE/WRITE_ONCE. This series kicks off the effort to do it. Starting with net/tls. [0] https://lore.kernel.org/bpf/a6bf279e-a998-84ab-4371-cd6c1ccbca5d@gmail.com/ [1] https://lwn.net/Articles/793253/ [2] https://github.com/google/ktsan/wiki/READ_ONCE-and-WRITE_ONCE ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22net/tls: Annotate access to sk_prot with READ_ONCE/WRITE_ONCEJakub Sitnicki2-5/+6
sockmap performs lockless writes to sk->sk_prot on the following paths: tcp_bpf_{recvmsg|sendmsg} / sock_map_unref sk_psock_put sk_psock_drop sk_psock_restore_proto WRITE_ONCE(sk->sk_prot, proto) To prevent load/store tearing [1], and to make tooling aware of intentional shared access [2], we need to annotate other sites that access sk_prot with READ_ONCE/WRITE_ONCE macros. Change done with Coccinelle with following semantic patch: @@ expression E; identifier I; struct sock *sk; identifier sk_prot =~ "^sk_prot$"; @@ ( E = -sk->sk_prot +READ_ONCE(sk->sk_prot) | -sk->sk_prot = E +WRITE_ONCE(sk->sk_prot, E) | -sk->sk_prot +READ_ONCE(sk->sk_prot) ->I ) Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22net/tls: Read sk_prot once when building tls proto opsJakub Sitnicki1-8/+9
Apart from being a "tremendous" win when it comes to generated machine code (see bloat-o-meter output for x86-64 below) this mainly prepares ground for annotating access to sk_prot with READ_ONCE, so that we don't pepper the code with access annotations and needlessly repeat loads. add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-46 (-46) Function old new delta tls_init 851 805 -46 Total: Before=21063, After=21017, chg -0.22% Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22net/tls: Constify base proto ops used for building tls protoJakub Sitnicki1-2/+2
The helper that builds kTLS proto ops doesn't need to and should not modify the base proto ops. Annotate the parameter as read-only. Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22net: stmmac: dwmac-rk: fix error path in rk_gmac_probeEmil Renner Berthing1-1/+1
Make sure we clean up devicetree related configuration also when clock init fails. Fixes: fecd4d7eef8b ("net: stmmac: dwmac-rk: Add integrated PHY support") Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22slcan: not call free_netdev before rtnl_unlock in slcan_openOliver Hartkopp1-0/+3
As the description before netdev_run_todo, we cannot call free_netdev before rtnl_unlock, fix it by reorder the code. This patch is a 1:1 copy of upstream slip.c commit f596c87005f7 ("slip: not call free_netdev before rtnl_unlock in slip_open"). Reported-by: yangerkun <yangerkun@huawei.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22Merge branch 'ionic-error-recovery-fixes'David S. Miller3-22/+50
Shannon Nelson says: ==================== ionic error recovery fixes These are a few little patches to make error recovery a little more safe and successful. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22ionic: check for NULL structs on teardownShannon Nelson2-13/+20
Make sure the queue structs exist before trying to tear them down to make for safer error recovery. Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22ionic: clean irq affinity on queue deinitShannon Nelson1-0/+2
Add a little more cleanup when tearing down the queues. Fixes: 1d062b7b6f64 ("ionic: Add basic adminq support") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22ionic: ignore eexist on rx filter addShannon Nelson1-2/+2
Don't worry if the rx filter add firmware request fails on EEXIST, at least we know the filter is there. Same for the delete request, at least we know it isn't there. Fixes: 2a654540be10 ("ionic: Add Rx filter and rx_mode ndo support") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22ionic: only save good lif dentryShannon Nelson1-1/+7
Don't save the lif->dentry until we know we have a good value. Fixes: 1a58e196467f ("ionic: Add basic lif support") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22ionic: leave dev cmd request contents alone on FW timeoutShannon Nelson1-1/+4
It is possible (but unlikely) that FW was busy and missed a heartbeat check but is still alive and will process the pending request, so don't clean the dev_cmd in this case. This occasionally occurs when working with a card that is supporting many devices and is trying to shut them all down at once, but still wants to see that last LIF disable request. Fixes: 97ca486592c0 ("ionic: add heartbeat check") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22ionic: add timeout error checking for queue disableShannon Nelson1-5/+15
Short circuit the cleanup if we get a timeout error from ionic_qcq_disable() so as to not have to wait too long on shutdown when we already know the FW is not responding. Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22ionic: make spdxcheck.py happyLukas Bulwahn2-2/+2
Headers ionic_if.h and ionic_regs.h are licensed under three alternative licenses and the used SPDX-License-Identifier expression makes ./scripts/spdxcheck.py complain: drivers/net/ethernet/pensando/ionic/ionic_if.h: 1:52 Syntax error: OR drivers/net/ethernet/pensando/ionic/ionic_regs.h: 1:52 Syntax error: OR As OR is associative, it is irrelevant if the parentheses are put around the first or the second OR-expression. Simply add parentheses to make spdxcheck.py happy. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22hsr: fix general protection fault in hsr_addr_is_self()Taehee Yoo1-4/+4
The port->hsr is used in the hsr_handle_frame(), which is a callback of rx_handler. hsr master and slaves are initialized in hsr_add_port(). This function initializes several pointers, which includes port->hsr after registering rx_handler. So, in the rx_handler routine, un-initialized pointer would be used. In order to fix this, pointers should be initialized before registering rx_handler. Test commands: ip netns del left ip netns del right modprobe -rv veth modprobe -rv hsr killall ping modprobe hsr ip netns add left ip netns add right ip link add veth0 type veth peer name veth1 ip link add veth2 type veth peer name veth3 ip link add veth4 type veth peer name veth5 ip link set veth1 netns left ip link set veth3 netns right ip link set veth4 netns left ip link set veth5 netns right ip link set veth0 up ip link set veth2 up ip link set veth0 address fc:00:00:00:00:01 ip link set veth2 address fc:00:00:00:00:02 ip netns exec left ip link set veth1 up ip netns exec left ip link set veth4 up ip netns exec right ip link set veth3 up ip netns exec right ip link set veth5 up ip link add hsr0 type hsr slave1 veth0 slave2 veth2 ip a a 192.168.100.1/24 dev hsr0 ip link set hsr0 up ip netns exec left ip link add hsr1 type hsr slave1 veth1 slave2 veth4 ip netns exec left ip a a 192.168.100.2/24 dev hsr1 ip netns exec left ip link set hsr1 up ip netns exec left ip n a 192.168.100.1 dev hsr1 lladdr \ fc:00:00:00:00:01 nud permanent ip netns exec left ip n r 192.168.100.1 dev hsr1 lladdr \ fc:00:00:00:00:01 nud permanent for i in {1..100} do ip netns exec left ping 192.168.100.1 & done ip netns exec left hping3 192.168.100.1 -2 --flood & ip netns exec right ip link add hsr2 type hsr slave1 veth3 slave2 veth5 ip netns exec right ip a a 192.168.100.3/24 dev hsr2 ip netns exec right ip link set hsr2 up ip netns exec right ip n a 192.168.100.1 dev hsr2 lladdr \ fc:00:00:00:00:02 nud permanent ip netns exec right ip n r 192.168.100.1 dev hsr2 lladdr \ fc:00:00:00:00:02 nud permanent for i in {1..100} do ip netns exec right ping 192.168.100.1 & done ip netns exec right hping3 192.168.100.1 -2 --flood & while : do ip link add hsr0 type hsr slave1 veth0 slave2 veth2 ip a a 192.168.100.1/24 dev hsr0 ip link set hsr0 up ip link del hsr0 done Splat looks like: [ 120.954938][ C0] general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1]I [ 120.957761][ C0] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] [ 120.959064][ C0] CPU: 0 PID: 1511 Comm: hping3 Not tainted 5.6.0-rc5+ #460 [ 120.960054][ C0] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 120.962261][ C0] RIP: 0010:hsr_addr_is_self+0x65/0x2a0 [hsr] [ 120.963149][ C0] Code: 44 24 18 70 73 2f c0 48 c1 eb 03 48 8d 04 13 c7 00 f1 f1 f1 f1 c7 40 04 00 f2 f2 f2 4 [ 120.966277][ C0] RSP: 0018:ffff8880d9c09af0 EFLAGS: 00010206 [ 120.967293][ C0] RAX: 0000000000000006 RBX: 1ffff1101b38135f RCX: 0000000000000000 [ 120.968516][ C0] RDX: dffffc0000000000 RSI: ffff8880d17cb208 RDI: 0000000000000000 [ 120.969718][ C0] RBP: 0000000000000030 R08: ffffed101b3c0e3c R09: 0000000000000001 [ 120.972203][ C0] R10: 0000000000000001 R11: ffffed101b3c0e3b R12: 0000000000000000 [ 120.973379][ C0] R13: ffff8880aaf80100 R14: ffff8880aaf800f2 R15: ffff8880aaf80040 [ 120.974410][ C0] FS: 00007f58e693f740(0000) GS:ffff8880d9c00000(0000) knlGS:0000000000000000 [ 120.979794][ C0] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 120.980773][ C0] CR2: 00007ffcb8b38f29 CR3: 00000000afe8e001 CR4: 00000000000606f0 [ 120.981945][ C0] Call Trace: [ 120.982411][ C0] <IRQ> [ 120.982848][ C0] ? hsr_add_node+0x8c0/0x8c0 [hsr] [ 120.983522][ C0] ? rcu_read_lock_held+0x90/0xa0 [ 120.984159][ C0] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 120.984944][ C0] hsr_handle_frame+0x1db/0x4e0 [hsr] [ 120.985597][ C0] ? hsr_nl_nodedown+0x2b0/0x2b0 [hsr] [ 120.986289][ C0] __netif_receive_skb_core+0x6bf/0x3170 [ 120.992513][ C0] ? check_chain_key+0x236/0x5d0 [ 120.993223][ C0] ? do_xdp_generic+0x1460/0x1460 [ 120.993875][ C0] ? register_lock_class+0x14d0/0x14d0 [ 120.994609][ C0] ? __netif_receive_skb_one_core+0x8d/0x160 [ 120.995377][ C0] __netif_receive_skb_one_core+0x8d/0x160 [ 120.996204][ C0] ? __netif_receive_skb_core+0x3170/0x3170 [ ... ] Reported-by: syzbot+fcf5dd39282ceb27108d@syzkaller.appspotmail.com Fixes: c5a759117210 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22soc: qcom: ipa: kill IPA_RX_BUFFER_ORDERAlex Elder1-5/+5
Don't assume the receive buffer size is a power-of-2 number of pages. Instead, define the receive buffer size independently, and then compute the page order from that size when needed. This fixes a build problem that arises when the ARM64_PAGE_SHIFT config option is set to have a page size greater than 4KB. The problem was identified by Linux Kernel Functional Testing. The IPA code basically assumed the page size to be 4KB. A larger page size caused the receive buffer size to become correspondingly larger (32KB or 128KB for ARM64_16K_PAGES and ARM64_64K_PAGES, respectively). The receive buffer size is used to compute an "aggregation byte limit" value that gets programmed into the hardware, and the large page sizes caused that limit value to be too big to fit in a 5 bit field. This triggered a BUILD_BUG_ON() call in ipa_endpoint_validate_build(). This fix causes a lot of receive buffer memory to be wasted if system is configured for page size greater than 4KB. But such a misguided configuration will now build successfully. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22Merge branch 'hinic-BugFixes'David S. Miller6-60/+34
Luo bin says: ==================== hinic: BugFixes Fix a number of bugs which have been present since the first commit. The bugs fixed in these patchs are hardly exposed unless given very specific conditions. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22hinic: fix wrong value of MIN_SKB_LENLuo bin1-1/+1
the minimum value of skb len that hw supports is 32 rather than 17 Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 00:25:41 +0300