summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-03-26Merge branch 'mlxsw-Offload-TC-action-pedit-munge-dsfield'David S. Miller8-8/+515
Ido Schimmel says: ==================== mlxsw: Offload TC action pedit munge dsfield Petr says: The Spectrum switches allow packet prioritization based on DSCP on ingress, and update of DSCP on egress. This is configured through the DCB APP rules. For some use cases, assigning a custom DSCP value based on an ACL match is a better tool. To that end, offload FLOW_ACTION_MANGLE to permit changing of dsfield as a whole, or DSCP and ECN values in isolation. After fixing a commentary nit in patch #1, and mlxsw naming in patch #2, patches #3 and #4 add the offload to mlxsw. Patch #5 adds a forwarding selftest for pedit dsfield, applicable to SW as well as HW datapaths. Patch #6 adds a mlxsw-specific test to verify DSCP rewrite due to DCB APP rules is not performed on pedited packets. The tests only cover IPv4 dsfield setting. We have tests for IPv6 as well, but would like to postpone their contribution until the corresponding iproute patches have been accepted. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26selftests: mlxsw: qos_dscp_router: Test no DSCP rewrite after peditPetr Machata1-0/+30
When DSCP is updated through an offloaded pedit action, DSCP rewrite on egress should be disabled. Add a test that check that it is so. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26selftests: forwarding: Add a forwarding test for pedit munge dsfieldPetr Machata1-0/+238
Add a test that runs packets with dsfield set, and test that pedit adjusts the DSCP or ECN parts or the whole field. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26mlxsw: spectrum_flower: Offload FLOW_ACTION_MANGLEPetr Machata5-0/+174
Offload action pedit ex munge when used with a flower classifier. Only allow setting of DSCP, ECN, or the whole DSField in IPv4 and IPv6 packets. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26mlxsw: core: Add DSCP, ECN, dscp_rw to QOS_ACTIONPetr Machata1-0/+64
The QOS_ACTION is used for manipulating the QOS attributes of the packet. Add the defines and helpers related to DSCP and ECN fields, and dscp_rw. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26mlxsw: core: Rename mlxsw_afa_qos_cmd to mlxsw_afa_qos_switch_prio_cmdPetr Machata1-7/+7
The original idea was to reuse this set of actions for ECN rewrite as well, but on second look, it's not such a great idea. These two items should each have its own command. Rename the existing enum to make it obvious that it belongs to switch_prio_cmd. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: flow_offload.h: Fix a comment at flow_action_entry.manglePetr Machata1-1/+2
This field references FLOW_ACTION_PACKET_EDIT. Such action does not exist though. Instead the field is used for FLOW_ACTION_MANGLE and _ADD. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26qlcnic: Fix bad kzalloc null testXu Wang1-1/+1
In qlcnic_83xx_get_reset_instruction_template, the variable of null test is bad, so correct it. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26Merge tag 'mlx5-updates-2020-03-25' of ↵David S. Miller13-147/+263
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2020-03-25 1) Cleanups from Dan Carpenter and wenxu. 2) Paul and Roi, Some minor updates and fixes to E-Switch to address issues introduced in the previous reg_c0 updates series. 3) Eli Cohen simplifies and improves flow steering matching group searches and flow table entries version management. 4) Parav Pandit, improves devlink eswitch mode changes thread safety. By making devlink rely on driver for thread safety and introducing mlx5 eswitch mode change protection. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26atl2: remove unused variable 'atl2_driver_string'YueHaibing1-1/+0
drivers/net/ethernet/atheros/atlx/atl2.c:40:19: warning: ‘atl2_driver_string’ defined but not used [-Wunused-const-variable=] static const char atl2_driver_string[] = "Atheros(R) L2 Ethernet Driver"; ^~~~~~~~~~~~~~~~~~ commit ea973742140b ("net/atheros: Clean atheros code from driver version") left behind this, remove it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26tipc: Add a missing case of TIPC_DIRECT_MSG typeHoang Le3-2/+8
In the commit f73b12812a3d ("tipc: improve throughput between nodes in netns"), we're missing a check to handle TIPC_DIRECT_MSG type, it's still using old sending mechanism for this message type. So, throughput improvement is not significant as expected. Besides that, when sending a large message with that type, we're also handle wrong receiving queue, it should be enqueued in socket receiving instead of multicast messages. Fix this by adding the missing case for TIPC_DIRECT_MSG. Fixes: f73b12812a3d ("tipc: improve throughput between nodes in netns") Reported-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds12-34/+94
Pull rdma fixes from Jason Gunthorpe: "A small set of late-rc patches, mostly fixes for various crashers, some syzkaller fixes and a mlx5 HW limitation: - Several MAINTAINERS updates - Memory leak regression in ODP - Several fixes for syzkaller related crashes. Google recently taught syzkaller to create the software RDMA devices - Crash fixes for HFI1 - Several fixes for mlx5 crashes - Prevent unprivileged access to an unsafe mlx5 HW resource" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/mlx5: Block delay drop to unprivileged users RDMA/mlx5: Fix access to wrong pointer while performing flush due to error RDMA/core: Ensure security pkey modify is not lost MAINTAINERS: Clean RXE section and add Zhu as RXE maintainer IB/hfi1: Ensure pq is not left on waitlist IB/rdmavt: Free kernel completion queue when done RDMA/mad: Do not crash if the rdma device does not have a umad interface RDMA/core: Fix missing error check on dev_set_name() RDMA/nl: Do not permit empty devices names during RDMA_NLDEV_CMD_NEWLINK/SET RDMA/mlx5: Fix the number of hwcounters of a dynamic counter MAINTAINERS: Update maintainers for HISILICON ROCE DRIVER RDMA/odp: Fix leaking the tgid for implicit ODP
2020-03-26Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo29-427/+1573
ath.git patches for v5.7. Major changes: ath11k * handle RX fragments * enable PN offload * add support for HE BSS color
2020-03-26mac80211: set IEEE80211_TX_CTRL_PORT_CTRL_PROTO for nl80211 TXJohannes Berg1-2/+6
When a frame is transmitted via the nl80211 TX rather than as a normal frame, IEEE80211_TX_CTRL_PORT_CTRL_PROTO wasn't set and this will lead to wrong decisions (rate control etc.) being made about the frame; fix this. Fixes: 911806491425 ("mac80211: Add support for tx_control_port") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200326155333.f183f52b02f0.I4054e2a8c11c2ddcb795a0103c87be3538690243@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-26mac80211: mark station unauthorized before key removalJohannes Berg1-1/+6
If a station is still marked as authorized, mark it as no longer so before removing its keys. This allows frames transmitted to it to be rejected, providing additional protection against leaking plain text data during the disconnection flow. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200326155133.ccb4fb0bb356.If48f0f0504efdcf16b8921f48c6d3bb2cb763c99@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-26mac80211: Check port authorization in the ieee80211_tx_dequeue() caseJouni Malinen1-1/+18
mac80211 used to check port authorization in the Data frame enqueue case when going through start_xmit(). However, that authorization status may change while the frame is waiting in a queue. Add a similar check in the dequeue case to avoid sending previously accepted frames after authorization change. This provides additional protection against potential leaking of frames after a station has been disconnected and the keys for it are being removed. Cc: stable@vger.kernel.org Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Link: https://lore.kernel.org/r/20200326155133.ced84317ea29.I34d4c47cd8cc8a4042b38a76f16a601fbcbfd9b3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-26cfg80211: Do not warn on same channel at the end of CSAIlan Peer1-1/+5
When cfg80211_update_assoc_bss_entry() is called, there is a verification that the BSS channel actually changed. As some APs use CSA also for bandwidth changes, this would result with a kernel warning. Fix this by removing the WARN_ON(). Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200326150855.96316ada0e8d.I6710376b1b4257e5f4712fc7ab16e2b638d512aa@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-26mac80211: drop data frames without key on encrypted linksJohannes Berg4-12/+24
If we know that we have an encrypted link (based on having had a key configured for TX in the past) then drop all data frames in the key selection handler if there's no key anymore. This fixes an issue with mac80211 internal TXQs - there we can buffer frames for an encrypted link, but then if the key is no longer there when they're dequeued, the frames are sent without encryption. This happens if a station is disconnected while the frames are still on the TXQ. Detecting that a link should be encrypted based on a first key having been configured for TX is fine as there are no use cases for a connection going from with encryption to no encryption. With extended key IDs, however, there is a case of having a key configured for only decryption, so we can't just trigger this behaviour on a key being configured. Cc: stable@vger.kernel.org Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200326150855.6865c7f28a14.I9fb1d911b064262d33e33dfba730cdeef83926ca@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-26drm/scheduler: fix rare NULL ptr raceYintian Tao1-0/+2
There is one one corner case at dma_fence_signal_locked which will raise the NULL pointer problem just like below. ->dma_fence_signal ->dma_fence_signal_locked ->test_and_set_bit here trigger dma_fence_release happen due to the zero of fence refcount. ->dma_fence_put ->dma_fence_release ->drm_sched_fence_release_scheduled ->call_rcu here make the union fled “cb_list” at finished fence to NULL because struct rcu_head contains two pointer which is same as struct list_head cb_list Therefore, to hold the reference of finished fence at drm_sched_process_job to prevent the null pointer during finished fence dma_fence_signal [ 732.912867] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 732.914815] #PF: supervisor write access in kernel mode [ 732.915731] #PF: error_code(0x0002) - not-present page [ 732.916621] PGD 0 P4D 0 [ 732.917072] Oops: 0002 [#1] SMP PTI [ 732.917682] CPU: 7 PID: 0 Comm: swapper/7 Tainted: G OE 5.4.0-rc7 #1 [ 732.918980] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 [ 732.920906] RIP: 0010:dma_fence_signal_locked+0x3e/0x100 [ 732.938569] Call Trace: [ 732.939003] <IRQ> [ 732.939364] dma_fence_signal+0x29/0x50 [ 732.940036] drm_sched_fence_finished+0x12/0x20 [gpu_sched] [ 732.940996] drm_sched_process_job+0x34/0xa0 [gpu_sched] [ 732.941910] dma_fence_signal_locked+0x85/0x100 [ 732.942692] dma_fence_signal+0x29/0x50 [ 732.943457] amdgpu_fence_process+0x99/0x120 [amdgpu] [ 732.944393] sdma_v4_0_process_trap_irq+0x81/0xa0 [amdgpu] v2: hold the finished fence at drm_sched_process_job instead of amdgpu_fence_process v3: resume the blank line Signed-off-by: Yintian Tao <yttao@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-26KVM: X86: Narrow down the IPI fastpath to single target IPIWanpeng Li1-1/+4
The original single target IPI fastpath patch forgot to filter the ICR destination shorthand field. Multicast IPI is not suitable for this feature since wakeup the multiple sleeping vCPUs will extend the interrupt disabled time, it especially worse in the over-subscribe and VM has a little bit more vCPUs scenario. Let's narrow it down to single target IPI. Two VMs, each is 76 vCPUs, one running 'ebizzy -M', the other running cyclictest on all vCPUs, w/ this patch, the avg score of cyclictest can improve more than 5%. (pv tlb, pv ipi, pv sched yield are disabled during testing to avoid the disturb). Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1585189202-1708-3-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-26brcmfmac: add USB autosuspend feature supportWright Feng1-50/+71
We add enable dynamic suspend (autosuspend) support in host driver, and it can let platform cut down idle power consumption. To support autosuspend feature in host driver, kernel need to be built with CONFIG_USB_SUSPEND and autosuspend need to be turn on. And we also replace wowl feature with adding "needs_remote_wakeup", so that host still can be waken by wireless device. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1585124429-97371-6-git-send-email-chi-hsien.lin@cypress.com
2020-03-26brcmfmac: increase max hanger slots from 1K to 3K in fws layerMadhan Mohan R1-1/+1
Will enable FMAC to push more packets to bus tx queue and help improve throughput when fws queuing is enabled. This change is required to tune the throughput for passing WMM CERT tests. Signed-off-by: Madhan Mohan R <madhanmohan.r@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1585124429-97371-5-git-send-email-chi-hsien.lin@cypress.com
2020-03-26brcmfmac: fix the incorrect return value in brcmf_inform_single_bss().Raveendran Somu1-1/+1
The function brcmf_inform_single_bss returns the value as success, even when the length exceeds the maximum value. The fix is to send appropriate code on this error. This issue is observed when Cypress test group reported random fmac crashes when running their tests and the path was identified from the crash logs. With this fix the random failure issue in Cypress test group was resolved. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Raveendran Somu <raveendran.somu@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1585124429-97371-4-git-send-email-chi-hsien.lin@cypress.com
2020-03-26brcmfmac: Fix double freeing in the fmac usb data pathRaveendran Somu1-2/+1
When the brcmf_fws_process_skb() fails to get hanger slot for queuing the skb, it tries to free the skb. But the caller brcmf_netdev_start_xmit() of that funciton frees the packet on error return value. This causes the double freeing and which caused the kernel crash. Signed-off-by: Raveendran Somu <raveendran.somu@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1585124429-97371-3-git-send-email-chi-hsien.lin@cypress.com
2020-03-26brcmfmac: Fix driver crash on USB control transfer timeoutRaveendran Somu1-2/+4
When the control transfer gets timed out, the error status was returned without killing that urb, this leads to using the same urb. This issue causes the kernel crash as the same urb is sumbitted multiple times. The fix is to kill the urb for timeout transfer before returning error Signed-off-by: Raveendran Somu <raveendran.somu@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1585124429-97371-2-git-send-email-chi-hsien.lin@cypress.com
2020-03-26rtl8xxxu: Feed current txrate information for mac80211Chris Chiu2-2/+85
The nl80211 commands such as 'iw link' can't get current txrate information from the driver. This commit fills in the tx rate information from the C2H RA report in the sta_statistics function. Signed-off-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200320063833.1058-3-chiu@endlessm.com
2020-03-26rtl8xxxu: add enumeration for channel bandwidthChris Chiu2-1/+10
There's a data field in H2C and C2H commands which is used to carry channel bandwidth information. Add enumeration to make it more descriptive in code. Signed-off-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200320063833.1058-2-chiu@endlessm.com
2020-03-26rtw88: add a debugfs entry to enable/disable coex mechanismYan-Hsuan Chuang1-0/+45
Sometimes we need to stop the coex mechanism to debug, so that we can manually control the device through various outer commands. Hence, add a new debugfs coex_enable to allow us to enable/disable the coex mechanism when driver is running. To disable coex echo 0 > /sys/kernel/debug/ieee80211/phyX/rtw88/coex_enable To enable coex echo 1 > /sys/kernel/debug/ieee80211/phyX/rtw88/coex_enable To check coex dm is enabled or not cat /sys/kernel/debug/ieee80211/phyX/rtw88/coex_enable Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200313033008.20070-3-yhchuang@realtek.com
2020-03-26rtw88: add a debugfs entry to dump coex's infoYan-Hsuan Chuang6-0/+595
Add a new entry "coex_info" in debugfs to dump coex's states for us to debug on coex's issues. The basic concept for co-existence (coex, usually for WiFi + BT) is to decide a strategy based on the current status of WiFi and BT. So, it means the WiFi driver requires to gather information from BT side and choose a strategy (TDMA/table/HW settings). Althrough we can easily check the current status of WiFi, e.g., from kernel log or just dump the hardware registers, it is still very difficult for us to gather so many different types of WiFi states (such as RFE config, antenna, channel/band, TRX, Power save). Also we will need BT's information that is stored in "struct rtw_coex". So it is necessary for us to have a debugfs that can dump all of the WiFi/BT information required. Note that to debug on coex related issues, we usually need a longer period of time of coex_info dump every 2 seconds (for example, 30 secs, so we should have 15 times of coex_info's dump). Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200313033008.20070-2-yhchuang@realtek.com
2020-03-26net/mlx5: E-switch, Protect eswitch mode changesParav Pandit4-50/+123
Currently eswitch mode change is occurring from 2 different execution contexts as below. 1. sriov sysfs enable/disable 2. devlink eswitch set commands Both of them need to access eswitch related data structures in synchronized manner. Without any synchronization below race condition exist. SR-IOV enable/disable with devlink eswitch mode change: cpu-0 cpu-1 ----- ----- mlx5_device_disable_sriov() mlx5_devlink_eswitch_mode_set() mlx5_eswitch_disable() esw_offloads_stop() esw_offloads_disable() mlx5_eswitch_disable() esw_offloads_disable() Hence, they are synchronized using a new mode_lock. eswitch's state_lock is not used as it can lead to a deadlock scenario below and state_lock is only for vport and fdb exclusive access. ip link set vf <param> netlink rcv_msg() - Lock A rtnl_lock vfinfo() esw->state_lock() - Lock B devlink eswitch_set devlink_mutex esw->state_lock() - Lock B attach_netdev() register_netdev() rtnl_lock - Lock A Alternatives considered: 1. Acquiring rtnl lock before taking esw->state_lock to follow similar locking sequence as ip link flow during eswitch mode set. rtnl lock is not good idea for two reasons. (a) Holding rtnl lock for several hundred device commands is not good idea. (b) It leads to below and more similar deadlocks. devlink eswitch_set devlink_mutex rtnl_lock - Lock A esw->state_lock() - Lock B eswitch_disable() reload() ib_register_device() ib_cache_setup_one() rtnl_lock() 2. Exporting devlink lock may lead to undesired use of it in vendor driver(s) in future. 3. Unloading representors outside of the mode_lock requires serialization with other process trying to enable the eswitch. 4. Differing the representors life cycle to a different workqueue requires synchronization with func_change_handler workqueue. Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-26net/mlx5: E-switch, Extend eswitch enable to handle num_vfs changeParav Pandit4-32/+58
Subsequent patch protects eswitch mode changes across sriov and devlink interfaces. It is desirable for eswitch to provide thread safe eswitch enable and disable APIs. Hence, extend eswitch enable API to optionally update num_vfs when requested. In subsequent patch, eswitch num_vfs are updated after all the eswitch users eswitch drops its reference count. Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-26net/mlx5: Split eswitch mode check to different helper functionParav Pandit1-4/+33
In order to check eswitch state under a lock, prepare code to split capability check and eswitch state check into two helper functions. Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-26devlink: Rely on driver eswitch thread safety instead of devlinkParav Pandit1-1/+2
devlink_nl_cmd_eswitch_set_doit() doesn't hold devlink->lock mutex while invoking driver callback. This is likely due to eswitch mode setting involves adding/remove devlink ports, health reporters or other devlink objects for a devlink device. So it is driver responsiblity to ensure thread safe eswitch state transition happening via either sriov legacy enablement or via devlink eswitch set callback. Therefore, get() callback should also be invoked without holding devlink->lock mutex. Vendor driver can use same internal lock which it uses during eswitch mode set() callback. This makes get() and set() implimentation symmetric in devlink core and in vendor drivers. Hence, remove holding devlink->lock mutex during eswitch get() callback. Failing to do so results into below deadlock scenario when mlx5_core driver is improved to handle eswitch mode set critical section invoked by devlink and sriov sysfs interface in subsequent patch. devlink_nl_cmd_eswitch_set_doit() mlx5_eswitch_mode_set() mutex_lock(esw->mode_lock) <- Lock A [...] register_devlink_port() mutex_lock(&devlink->lock); <- lock B mutex_lock(&devlink->lock); <- lock B devlink_nl_cmd_eswitch_get_doit() mlx5_eswitch_mode_get() mutex_lock(esw->mode_lock) <- Lock A In subsequent patch, mlx5_core driver uses its internal lock during get() and set() eswitch callbacks. Other drivers have been inspected which returns either constant during get operations or reads the value from already allocated structure. Hence it is safe to remove the lock in get( ) callback and let vendor driver handle it. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-26net/mlx5: Simplify mlx5_unload_one() and its callersParav Pandit3-10/+5
mlx5_unload_one() always returns 0. Simplify callers of mlx5_unload_one() and remove the dead code. Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-26net/mlx5: Simplify mlx5_register_device to return voidParav Pandit3-15/+5
mlx5_register_device() doesn't check for any error and always returns 0. Simplify mlx5_register_device() to return void and its caller, remove dead code related to it. Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-26net/mlx5: Avoid group version scan when not necessaryEli Cohen1-6/+10
Group version is used when modifying a rule is allowed (FLOW_ACT_NO_APPEND is clear) to detect a case where the rule was found but while the groups where unlocked a new FTE was added. In this case, the added FTE could be one with identical match value so we need to attempt again with group lock held. Change the code so version is retrieved only when FLOW_ACT_NO_APPEND is cleared. As result, later compare can also be avoided if FLOW_ACT_NO_APPEND is cleared. Also improve comments text. Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-26net/mlx5: Avoid incrementing FTE versionEli Cohen1-1/+0
FTE version is not used anywhere in the code so avoid incrementing it. Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-26net/mlx5: Fix group version managementEli Cohen1-0/+1
When adding a rule to a flow group we need increment the version of the group. Current code fails to do that and as a result, when trying to add a rule, we will fail to discover a case where an FTE with the same match value was added while we scanned the groups of the same match criteria, thus we may try to add an FTE that was already added. Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-26net/mlx5: Simplify matching group searchesEli Cohen1-30/+11
Instead of using two different structs for searching groups with the same match, use a single struct and thus simplify the code, make it more readable and smaller size which means less code cache misses. text data bss dec hex before: 35524 2744 0 38268 957c after: 35038 2744 0 37782 9396 When testing add 70000 rules, delete all the rules, and repeat three times taking the average, we get (time in seconds): Before the change: insert 16.80, delete 11.02 After the change: insert 16.55, delete 10.95 Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-26net/mlx5: E-Switch, Use correct type for chain, prio and level valuesRoi Dayan1-1/+2
The correct type is u32. Fixes: d18296ffd9cc ("net/mlx5: E-Switch, Introduce global tables") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-26net/mlx5: E-Switch, free flow_group_in after creating the restore tableRoi Dayan1-0/+2
We allocate a temporary memory but forget to free it. Fixes: 11b717d61526 ("net/mlx5: E-Switch, Get reg_c0 value on CQE") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-26net/mlx5: E-Switch, Enable chains only if regs loopback is enabledPaul Blakey2-20/+26
Register c0 loopback is needed to fully support chains and prios. Enable chains and prio only if loopback (of reg c1 which came together with c0), is enabled. To be able to check that, move enabling of loopback before eswitch chains init. Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-26net/mlx5: E-Switch, Enable restore table only if reg_c1 is supportedPaul Blakey1-0/+9
Reg c0/c1 matching, rewrite of regs c0/c1, and copy header of regs c1,B is needed for the restore table to function, might not be supported by firmware, and creation of the restore table or the copy header will fail. Check reg_c1 loopback support, as firmware which supports this, should have all of the above. Fixes: 11b717d61526 ("net/mlx5: E-Switch, Get reg_c0 value on CQE") Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-26net/mlx5e: remove duplicated check chain_index in mlx5e_rep_setup_ft_cbwenxu1-2/+1
The function mlx5e_rep_setup_ft_cb check chain_index is zero twice. Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-26net/mlx5e: Fix actions_match_supported() returnDan Carpenter1-1/+1
The actions_match_supported() function returns a bool, true for success and false for failure. This error path is returning a negative which is cast to true but it should return false. Fixes: 4c3844d9e97e ("net/mlx5e: CT: Introduce connection tracking") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller416-1919/+4242
Overlapping header include additions in macsec.c A bug fix in 'net' overlapping with the removal of 'version' string in ena_netdev.c Overlapping test additions in selftests Makefile Overlapping PCI ID table adjustments in iwlwifi driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26clk: imx: Align imx sc clock parent msg structs to 4Leonard Crestez1-1/+1
The imx SC api strongly assumes that messages are composed out of 4-bytes words but some of our message structs have odd sizeofs. This produces many oopses with CONFIG_KASAN=y. Fix by marking with __aligned(4). Fixes: 666aed2d13ee ("clk: imx: scu: add set parent support") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Link: https://lkml.kernel.org/r/aad021e432b3062c142973d09b766656eec18fde.1582216144.git.leonard.crestez@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-26clk: imx: Align imx sc clock msg structs to 4Leonard Crestez1-3/+3
The imx SC api strongly assumes that messages are composed out of 4-bytes words but some of our message structs have odd sizeofs. This produces many oopses with CONFIG_KASAN=y. Fix by marking with __aligned(4). Fixes: fe37b4820417 ("clk: imx: add scu clock common part") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Link: https://lkml.kernel.org/r/10e97a04980d933b2cfecb6b124bf9046b6e4f16.1582216144.git.leonard.crestez@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-26clk: Pass correct arguments to __clk_hw_register_gate()Stephen Boyd1-5/+5
I copy/pasted these macros and forgot to update the argument names and where they're passed to. Fix it so that these macros make sense. Reported-by: Maxime Ripard <maxime@cerno.tech> Fixes: 194efb6e2667 ("clk: gate: Add support for specifying parents via DT/pointers") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20200325022257.148244-1-sboyd@kernel.org Tested-by: Maxime Ripard <mripard@kernel.org>
2020-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds159-945/+2140
Pull networking fixes from David Miller: 1) Fix deadlock in bpf_send_signal() from Yonghong Song. 2) Fix off by one in kTLS offload of mlx5, from Tariq Toukan. 3) Add missing locking in iwlwifi mvm code, from Avraham Stern. 4) Fix MSG_WAITALL handling in rxrpc, from David Howells. 5) Need to hold RTNL mutex in tcindex_partial_destroy_work(), from Cong Wang. 6) Fix producer race condition in AF_PACKET, from Willem de Bruijn. 7) cls_route removes the wrong filter during change operations, from Cong Wang. 8) Reject unrecognized request flags in ethtool netlink code, from Michal Kubecek. 9) Need to keep MAC in reset until PHY is up in bcmgenet driver, from Doug Berger. 10) Don't leak ct zone template in act_ct during replace, from Paul Blakey. 11) Fix flushing of offloaded netfilter flowtable flows, also from Paul Blakey. 12) Fix throughput drop during tx backpressure in cxgb4, from Rahul Lakkireddy. 13) Don't let a non-NULL skb->dev leave the TCP stack, from Eric Dumazet. 14) TCP_QUEUE_SEQ socket option has to update tp->copied_seq as well, also from Eric Dumazet. 15) Restrict macsec to ethernet devices, from Willem de Bruijn. 16) Fix reference leak in some ethtool *_SET handlers, from Michal Kubecek. 17) Fix accidental disabling of MSI for some r8169 chips, from Heiner Kallweit. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (138 commits) net: Fix CONFIG_NET_CLS_ACT=n and CONFIG_NFT_FWD_NETDEV={y, m} build net: ena: Add PCI shutdown handler to allow safe kexec selftests/net/forwarding: define libs as TEST_PROGS_EXTENDED selftests/net: add missing tests to Makefile r8169: re-enable MSI on RTL8168c net: phy: mdio-bcm-unimac: Fix clock handling cxgb4/ptp: pass the sign of offset delta in FW CMD net: dsa: tag_8021q: replace dsa_8021q_remove_header with __skb_vlan_pop net: cbs: Fix software cbs to consider packet sending time net/mlx5e: Do not recover from a non-fatal syndrome net/mlx5e: Fix ICOSQ recovery flow with Striding RQ net/mlx5e: Fix missing reset of SW metadata in Striding RQ reset net/mlx5e: Enhance ICOSQ WQE info fields net/mlx5_core: Set IB capability mask1 to fix ib_srpt connection failure selftests: netfilter: add nfqueue test case netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress netfilter: nft_fwd_netdev: validate family and chain type netfilter: nft_set_rbtree: Detect partial overlaps on insertion netfilter: nft_set_rbtree: Introduce and use nft_rbtree_interval_start() netfilter: nft_set_pipapo: Separate partial and complete overlap cases on insertion ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 18:20:16 +0300