| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit 1788cf6a91d9 ("tty: serial: switch from circ_buf to kfifo")
introduced an error in the TX DMA handling for 8250_omap.
When the OMAP_DMA_TX_KICK flag is set, the "skip_byte" is pulled from
the kfifo and emitted directly in order to start the DMA. While the
kfifo is updated, dma->tx_size is not decreased. This leads to
uart_xmit_advance() called in omap_8250_dma_tx_complete() advancing the
kfifo by one too much.
In practice, transmitting N bytes has been seen to result in the last
N-1 bytes being sent repeatedly.
This change fixes the problem by moving all of the dma setup after the
OMAP_DMA_TX_KICK handling and using kfifo_len() instead of the DMA size
for the 4-byte cutoff check. This slightly changes the behaviour at
buffer wraparound, but it still transmits the correct bytes somehow.
Now, the "skip_byte" would no longer be accounted to the stats. As
previously, dma->tx_size included also this skip byte, up->icount.tx was
updated by aforementioned uart_xmit_advance() in
omap_8250_dma_tx_complete(). Fix this by using the uart_fifo_out()
helper instead of bare kfifo_get().
Based on patch by Mans Rullgard <mans@mansr.com>
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Fixes: 1788cf6a91d9 ("tty: serial: switch from circ_buf to kfifo")
Link: https://lore.kernel.org/all/20250506150748.3162-1-mans@mansr.com/
Reported-by: Mans Rullgard <mans@mansr.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250522053835.3495975-1-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The console dimension and cursor position are available through the
/dev/vcsa interface already. However the /dev/vcsa header format uses
single-byte fields therefore those values are clamped to 255.
As surprizing as this may seem, some people do use 240-column 67-row
screens (a 1920x1080 monitor with 8x16 pixel fonts) which is getting
close to the limit. Monitors with higher resolution are not uncommon
these days (3840x2160 producing a 480x135 character display) and it is
just a matter of time before someone with, say, a braille display using
the Linux VT console and BRLTTY on such a screen reports a bug about
missing and oddly misaligned screen content.
Let's add VT_GETCONSIZECSRPOS for the retrieval of console size and cursor
position without byte-sized limitations. The actual console size limit as
encoded in vt.c is 32767x32767 so using a short here is appropriate. Then
this can be used to get the cursor position when /dev/vcsa reports 255.
The screen dimension may already be obtained using TIOCGWINSZ and adding
the same information to VT_GETCONSIZECSRPOS might be redundant. However
applications that care about cursor position also care about display
size and having 2 separate system calls to obtain them separately is
wasteful. Also, the cursor position can be queried by writing "\e[6n" to
a tty and reading back the result but that may be done only by the actual
application using that tty and not a sideline observer.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/20250520171851.1219676-3-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is comprised of 3 aspects:
- Take note of when applications advertise bracketed paste support via
"\e[?2004h" and "\e[?2004l".
- Insert bracketed paste markers ("\e[200~" and "\e[201~") around pasted
content in paste_selection() when bracketed paste is active.
- Add TIOCL_GETBRACKETEDPASTE to return bracketed paste status so user
space daemons implementing cut-and-paste functionality (e.g. gpm,
BRLTTY) may know when to insert bracketed paste markers.
Link: https://en.wikipedia.org/wiki/Bracketed-paste
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250520171851.1219676-2-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
They are listed amon those cmd values that "treat 'arg' as an integer"
which is wrong. They should instead fall into the default case. Probably
nobody ever relied on that code since 2009 but still.
Fixes: e92166517e3c ("tty: handle VT specific compat ioctls in vt driver")
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/pr214s15-36r8-6732-2pop-159nq85o48r7@syhkavp.arg
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This shaves about 170 bytes from ucs.o.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/20250507141535.40655-9-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Attempt to display a fallback character when given character doesn't
have an available glyph. The substitution may not be as good as the
original character but still way more helpful than a squared question
mark.
Example substitutions: À -> A, ç -> c, ø -> o, ─ -> -, © -> C, etc.
See gen_ucs_fallback_table.py for a comprehensive list.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/20250507141535.40655-8-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is the code querying the newly introduced tables.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/20250507141535.40655-7-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The generated table maps complex characters to their simpler fallback
forms for a terminal display when corresponding glyphs are unavailable.
A page-based approach is used to reduce compiled binary footprint.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/20250507141535.40655-6-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The generated table maps complex characters to their simpler fallback
forms for a terminal display when corresponding glyphs are unavailable.
This includes diacritics, symbols as well as many drawing characters.
Fallback characters aren't perfect replacements, obviously. But they are
still far more useful than a bunch of squared question marks.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250507141535.40655-5-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
No logical changes. Make it easier for enhancements to come.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/20250507141535.40655-4-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
And to do so we ensure the Unicode screen buffer is initialized when
double-width characters are encountered.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/20250507141535.40655-3-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The in_range() helper accepts a start and a length, not a start and
an end.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250507141535.40655-2-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Refactor parity calculations to use the standard parity8() helper.
This change eliminates redundant implementations.
Co-developed-by: Yu-Chun Lin <eleanor15x@gmail.com>
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://lore.kernel.org/r/20250515081311.775559-1-visitorckw@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The binding references in-kernel serial.yaml, so there is no need to
explicitly list its properties. Note that rts-gpio is also redundant
because DTS should be simply converted to -gpios variants.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250514125127.56149-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Socionext Milbeaut UART binding to DT schema. It is a
straight-forward conversion.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250507154924.1602842-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Microchip PIC32 UART binding to DT schema. The binding was
unclear there are 3 interrupts. The functions were determined from the
driver. The 'cts-gpios' property is covered by serial.yaml schema.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250507154937.1603190-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Arm SBSA UART binding to DT schema. It is a straight-forward
conversion.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20250506220016.2545637-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Synopsys ARC UART binding to DT schema. Drop the "aliases"
portion which is not relevant to this schema.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250507154909.1602497-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Marvell Armada-3700 UART binding to DT schema. It is a
straight-forward conversion.
Drop the long deprecated single interrupt support.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250507154408.1595932-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Lantiq SoC ASC UART binding to DT schema. There are no such
clock identifier defines nor a user with clocks, so drop the example
with clocks.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250506220029.2546179-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Cirrus EP7209 UART binding to DT schema. There is no user of
"cirrus,ep7312-uart" other than the example, so drop it. Drop the
"aliases" node part as it is not relevant to the schema. The modem
control GPIOs are covered by the serial.yaml schema and don't have to be
listed in the schema.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250506220021.2545820-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Arm MPS2 UART binding to DT schema. It is a straight-forward
conversion.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20250506220012.2545470-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the NXP LPC3220 HS UART binding to DT schema. It is a
straight-forward conversion.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://lore.kernel.org/r/20250506220048.2546915-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Conexant Digicolor USART binding to DT schema. It is a
straight-forward conversion.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/20250506220025.2545995-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
No device was set which caused serial_base_ctrl_add to crash.
BUG: kernel NULL pointer dereference, address: 0000000000000050
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 16 UID: 0 PID: 368 Comm: (udev-worker) Not tainted 6.12.25-amd64 #1 Debian 6.12.25-1
RIP: 0010:serial_base_ctrl_add+0x96/0x120
Call Trace:
<TASK>
serial_core_register_port+0x1a0/0x580
? __setup_irq+0x39c/0x660
? __kmalloc_cache_noprof+0x111/0x310
jsm_uart_port_init+0xe8/0x180 [jsm]
jsm_probe_one+0x1f4/0x410 [jsm]
local_pci_probe+0x42/0x90
pci_device_probe+0x22f/0x270
really_probe+0xdb/0x340
? pm_runtime_barrier+0x54/0x90
? __pfx___driver_attach+0x10/0x10
__driver_probe_device+0x78/0x110
driver_probe_device+0x1f/0xa0
__driver_attach+0xba/0x1c0
bus_for_each_dev+0x8c/0xe0
bus_add_driver+0x112/0x1f0
driver_register+0x72/0xd0
jsm_init_module+0x36/0xff0 [jsm]
? __pfx_jsm_init_module+0x10/0x10 [jsm]
do_one_initcall+0x58/0x310
do_init_module+0x60/0x230
Tested with Digi Neo PCIe 8 port card.
Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM")
Cc: stable <stable@kernel.org>
Signed-off-by: Dustin Lundquist <dustin@null-ptr.net>
Link: https://lore.kernel.org/r/3f31d4f75863614655c4673027a208be78d022ec.camel@null-ptr.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add SAMA7D65 USART compatible to DT bindings documentation.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/ba19dff5c20bd022cf5391ac909a85ab5e1797b4.1746201835.git.Ryan.Wanner@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add new dynamically generated headers to the local .gitignore.
Fixes: c2d2c5c0d631 ("vt: move UCS tables to the "shipped" form")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/20250430122917.72105-1-brgl@bgdev.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Refine several dev_err() and dev_dbg() messages to solve:
// hardcoded device name
dev_dbg(dev, "...dev_name_str...")
// repeated device name since dev_dbg() also prints it as prefix
dev_err(dev, "...%s...", dev_name(dev))
// not concise as dev_err(dev, "...%d...", err)
dev_err(dev, "...%pe...", ERR_PTR(err))
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250425-fix_serdev-v3-1-2e4ea8261640@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
later devices
Systems that issue PCIe hot reset requests during a suspend/resume
cycle cause PCI1XXXX device revisions prior to C0 to get its UART
configuration registers reset to hardware default values. This results
in device inaccessibility and data transfer failures. Starting with
Revision C0, support was added in the device hardware (via the Hot
Reset Disable Bit) to allow resetting only the PCIe interface and its
associated logic, but preserving the UART configuration during a hot
reset. This patch enables the hot reset disable feature during suspend/
resume for C0 and later revisions of the device.
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250425145500.29036-1-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ExynosAutov920 SoC supports 18 UART ports, update
the value of UART_NR to accommodate the same.
Signed-off-by: Faraz Ata <faraz.ata@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250429102941.4138463-1-faraz.ata@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- When releasing a start-aligned resource, e.g., a bridge window, save
start/end/flags for the next assignment attempt; fixes a v6.15-rc1
regression (Ilpo Järvinen)
- Move set_pcie_speed.sh from TEST_PROGS to TEST_FILE; fixes a bwctrl
selftest v6.15-rc1 regression (Ilpo Järvinen)
- Add Manivannan Sadhasivam as maintainer of native host bridge and
endpoint drivers (Manivannan Sadhasivam)
- In endpoint test driver, defer IRQ allocation from .probe() until
ioctl() to fix a regression on platforms where the Vendor/Device ID
match doesn't include driver_data (Niklas Cassel)
* tag 'pci-v6.15-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
misc: pci_endpoint_test: Defer IRQ allocation until ioctl(PCITEST_SET_IRQTYPE)
MAINTAINERS: Move Manivannan Sadhasivam as PCI Native host bridge and endpoint maintainer
selftests/pcie_bwctrl: Fix test progs list
PCI: Restore assigned resources fully after release
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Revert a v6.15 patch due to a report of SELinux test failures
* tag 'nfsd-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
Revert "sunrpc: clean cache_detail immediately when flush is written frequently"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix 32-bit kernel boot crash if passed physical memory with more than
32 address bits
- Fix Xen PV crash
- Work around build bug in certain limited build environments
- Fix CTEST instruction decoding in insn_decoder_test
* tag 'x86-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/insn: Fix CTEST instruction decoding
x86/boot: Work around broken busybox 'truncate' tool
x86/mm: Fix _pgd_alloc() for Xen PV mode
x86/e820: Discard high memory that can't be addressed by 32-bit systems
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Fix sporadic crashes in dequeue_entities() due to ... bad math.
[ Arguably if pick_eevdf()/pick_next_entity() was less trusting of
complex math being correct it could have de-escalated a crash into
a warning, but that's for a different patch ]"
* tag 'sched-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/eevdf: Fix se->slice being set to U64_MAX and resulting crash
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc perf events fixes from Ingo Molnar:
- Use POLLERR for events in error state, instead of the ambiguous
POLLHUP error value
- Fix non-sampling (counting) events on certain x86 platforms
* tag 'perf-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix non-sampling (counting) events on certain x86 platforms
perf/core: Change to POLLERR for pinned events with error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"Fix crashes in the gic-v2m irqchip driver, caused by an incorrect
__init annotation"
* tag 'irq-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v2m: Prevent use after free of gicv2m_get_fwnode()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Add a missing Kconfig option, fix some bugs in exception handlers,
memory management and KVM"
* tag 'loongarch-fixes-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Fix PMU pass-through issue if VM exits to host finally
LoongArch: KVM: Fully clear some CSRs when VM reboot
LoongArch: KVM: Fix multiple typos of KVM code
LoongArch: Return NULL from huge_pte_offset() for invalid PMD
LoongArch: Remove a bogus reference to ZONE_DMA
LoongArch: Handle fp, lsx, lasx and lbt assembly symbols
LoongArch: Make do_xyz() exception handlers more robust
LoongArch: Make regs_irqs_disabled() more clear
LoongArch: Select ARCH_USE_MEMTEST
|
|
Pull OpenRISC updates from Stafford Horne:
- Support for cacheinfo API to expose OpenRISC cache info via sysfs,
this also translated to some cleanups to OpenRISC cache flush and
invalidate API's
- Documentation updates for new mailing list and toolchain binaries
* tag 'for-linus' of https://github.com/openrisc/linux:
Documentation: openrisc: Update toolchain binaries URL
Documentation: openrisc: Update mailing list
openrisc: Add cacheinfo support
openrisc: Introduce new utility functions to flush and invalidate caches
openrisc: Refactor struct cpuinfo_or1k to reduce duplication
|
|
Ondrej reports that certain SELinux tests are failing after commit
fc2a169c56de ("sunrpc: clean cache_detail immediately when flush is
written frequently"), merged during the v6.15 merge window.
Reported-by: Ondrej Mosnacek <omosnace@redhat.com>
Fixes: fc2a169c56de ("sunrpc: clean cache_detail immediately when flush is written frequently")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kunit fix from Kees Cook:
"A single fix for the kunit lib/tests/ relocation:
- Ensure prime numbers tests are included in KUnit test runs (Mark Brown)"
* tag 'move-lib-kunit-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib: Ensure prime numbers tests are included in KUnit test runs
|
|
Pull drm fixes from Dave Airlie:
"Weekly drm fixes, mostly amdgpu, with some exynos cleanups and a
couple of minor fixes, seems a bit quiet, but probably some lag from
Easter holidays.
amdgpu:
- P2P DMA fixes
- Display reset fixes
- DCN 3.5 fixes
- ACPI EDID fix
- LTTPR fix
- mode_valid() fix
exynos:
- fix spelling error
- remove redundant error handling in exynos_drm_vidi.c module
- marks struct decon_data as const in the exynos7_drm_decon driver
since it is only read
- Remove unnecessary checking in exynos_drm_drv.c module
meson:
- Fix VCLK calculation
panel:
- jd9365a: Fix reset polarity"
* tag 'drm-fixes-2025-04-26' of https://gitlab.freedesktop.org/drm/kernel:
drm/exynos: Fix spelling mistake "enqueu" -> "enqueue"
drm/exynos: exynos7_drm_decon: Consstify struct decon_data
drm/exynos: fixed a spelling error
drm/exynos/vidi: Remove redundant error handling in vidi_get_modes()
drm/exynos: Remove unnecessary checking
drm/amd/display: do not copy invalid CRTC timing info
drm/amd/display: Default IPS to RCG_IN_ACTIVE_IPS2_IN_OFF
drm/amd/display: Use 16ms AUX read interval for LTTPR with old sinks
drm/amd/display: Fix ACPI edid parsing on some Lenovo systems
drm/amdgpu: Allow P2P access through XGMI
drm/amd/display: Enable urgent latency adjustment on DCN35
drm/amd/display: Force full update in gpu reset
drm/amd/display: Fix gpu reset in multidisplay config
drm/amdgpu: Don't pin VRAM without DMABUF_MOVE_NOTIFY
drm/amdgpu: Use allowed_domains for pinning dmabufs
drm: panel: jd9365da: fix reset signal polarity in unprepare
drm/meson: use unsigned long long / Hz for frequency types
Revert "drm/meson: vclk: fix calculation of 59.94 fractional rates"
|
|
Use the "shipped" mechanism to copy pre-generated tables to the build
tree by default. If GENERATE_UCS_TABLES=1 then they are generated at
build time instead. If GENERATE_UCS_TABLES=2 then
gen_ucs_recompose_table.py is invoked with --full.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250417184849.475581-15-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Width tables are now split into BMP (16-bit) and non-BMP (above 16-bit).
This reduces the corresponding text size by 20-25%.
Note: scripts/checkpatch.pl complains about "... exceeds 100 columns".
Please ignore.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250417184849.475581-14-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Split table ranges into BMP (16-bit) and non-BMP (above 16-bit).
This reduces the corresponding text size by 20-25%.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250417184849.475581-13-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is now taken care of by ucs_is_zero_width().
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250417184849.475581-12-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the Unicode screen buffer, we follow double-width code points with a
space to maintain proper column alignment. This, however, creates
semantic problems when e.g. using cut and paste.
Let's use a better code point for the column padding's purpose i.e. a
zero-width space rather than a full space. This way the combination
retains a width of 2.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250417184849.475581-11-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Try replacing any decomposed Unicode sequence by the corresponding
recomposed code point. Code point to glyph correspondance works best
after recomposition, and this apply mostly to single-width code points
therefore we can't preserve them in their decomposed form anyway.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250417184849.475581-10-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Table of base character + combining mark pairs with their precomposed
equivalents.
Note: scripts/checkpatch.pl complains about "... exceeds 100 columns".
Please ignore.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250417184849.475581-9-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
