summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-12-09serial: ucc_uart: limit brg-frequency workaround to PPC32Rasmus Villemoes1-0/+7
According to Timur Tabi This bug in older U-Boots is definitely PowerPC-specific So before allowing this driver to be built for platforms other than PPC32, make sure that we don't accept malformed device trees on those other platforms. Suggested-by: Timur Tabi <timur@kernel.org> Reviewed-by: Timur Tabi <timur@kernel.org> Acked-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09serial: ucc_uart: use of_property_read_u32() in ucc_uart_probe()Rasmus Villemoes1-21/+15
For this to work correctly on little-endian hosts, don't access the device-tree properties directly in native endianness, but use the of_property_read_u32() helper. Reviewed-by: Timur Tabi <timur@kernel.org> Acked-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09serial: ucc_uart: stub out soft_uart_init for !CONFIG_PPC32Rasmus Villemoes1-1/+16
The Soft UART hack is only needed for some PPC-based SOCs. To allow building this driver for non-PPC, guard soft_uart_init() and its helpers by CONFIG_PPC32, and use a no-op soft_uart_init() otherwise. Reviewed-by: Timur Tabi <timur@kernel.org> Acked-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09serial: ucc_uart: factor out soft_uart initializationRasmus Villemoes1-52/+58
The "soft uart" mechanism is a workaround for a silicon bug which (as far as I know) only affects some PPC-based SOCs. The code that determines which microcode blob to request relies on some powerpc-specific bits (e.g. the mfspr(SPRN_SVR) and hence also the asm/reg.h header). This makes it a little awkward to allow this driver to be built for non-PPC based SOCs with a QE, even if they are not affected by that silicon bug and thus don't need any of the Soft UART logic. There's no way around guarding those bits with some ifdeffery, so to keep that isolated, factor out the do-we-need-soft-uart-and-if-so-handle-the-firmware to a separate function, which we can then easily stub out for non-PPC. Reviewed-by: Timur Tabi <timur@kernel.org> Acked-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09serial: ucc_uart: replace ppc-specific IO accessorsRasmus Villemoes1-108/+102
Some ARM-based SOCs (e.g. LS1021A) also have a QUICC engine. As preparation for allowing this driver to build on ARM, replace the ppc-specific in_be16() etc. by the qe_io* helpers. Done via coccinelle. Reviewed-by: Timur Tabi <timur@kernel.org> Acked-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09serial: ucc_uart: explicitly include soc/fsl/cpm.hRasmus Villemoes1-0/+1
This driver uses #defines from soc/fsl/cpm.h, so instead of relying on some other header pulling that in, do that explicitly. This is preparation for allowing this driver to build on ARM. Reviewed-by: Timur Tabi <timur@kernel.org> Acked-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc/fsl/qe/qe.h: update include path for cpm.hRasmus Villemoes1-1/+1
asm/cpm.h under arch/powerpc is now just a wrapper for including soc/fsl/cpm.h. In order to make the qe.h header usable on other architectures, use the latter path directly. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: move cpm.h from powerpc/include/asm to include/soc/fslRasmus Villemoes2-171/+172
Some drivers, e.g. ucc_uart, need definitions from cpm.h. In order to allow building those drivers for non-ppc based SOCs, move the header to include/soc/fsl. For now, leave a trivial wrapper at the old location so drivers can be updated one by one. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: qe_io.c: use of_property_read_u32() in par_io_init()Rasmus Villemoes1-4/+3
This is necessary for this to work on little-endian hosts. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: qe_io.c: access device tree property using be32_to_cpuRasmus Villemoes1-4/+10
We need to apply be32_to_cpu to make this work correctly on little-endian hosts. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: qe_io.c: don't open-code of_parse_phandle()Rasmus Villemoes1-5/+2
Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: qe.c: use of_property_read_* helpersRasmus Villemoes1-25/+8
Instead of manually doing of_get_property/of_find_property and reading the value by assigning to a u32* or u64* and dereferencing, use the of_property_read_* functions. This make the code more readable, and more importantly, is required for this to work correctly on little-endian platforms. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: merge qe_ic.h headers into qe_ic.cRasmus Villemoes3-157/+50
The public qe_ic.h header is no longer included by anything but qe_ic.c. Merge both headers into qe_ic.c, and drop the unused constants. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: simplify qe_ic_init()Rasmus Villemoes1-23/+4
qe_ic_init() takes a flags parameter, but all callers (including the sole remaining one) have always passed 0. So remove that parameter and simplify the body accordingly. We still explicitly initialize the Interrupt Configuration Register (CICR) to its reset value of all-zeroes, just in case the bootloader has played funny games. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: make qe_ic_get_{low,high}_irq staticRasmus Villemoes2-12/+2
These are only called from within qe_ic.c, so make them static. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: don't use NO_IRQ in qe_ic.cRasmus Villemoes1-11/+10
This driver is currently PPC-only, and on powerpc, NO_IRQ is 0, so this doesn't change functionality. However, not every architecture defines NO_IRQ, and some define it as -1, so the detection of a failed irq_of_parse_and_map() (which returns 0 on failure) would be wrong on those. So to prepare for allowing this driver to build on other architectures, drop all references to NO_IRQ. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: remove unused qe_ic_set_* functionsRasmus Villemoes2-98/+0
There are no current callers of these functions, and they use the ppc-specific virq_to_hw(). So removing them gets us one step closer to building QE support for ARM. If the functionality is ever actually needed, the code can be dug out of git and then adapted to work on all architectures, but for future reference please note that I believe qe_ic_set_priority is buggy: The "priority < 4" should be "priority <= 4", and in the else branch 24 should be replaced by 28, at least if I'm reading the data sheet right. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: rename qe_ic_cascade_low_mpic -> qe_ic_cascade_lowRasmus Villemoes1-4/+4
The qe_ic_cascade_{low,high}_mpic functions are now used as handlers both when the interrupt parent is mpic as well as ipic, so remove the _mpic suffix. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: move qe_ic_cascade_* functions to qe_ic.cRasmus Villemoes2-42/+42
These functions are only ever called through a function pointer, and therefore it makes no sense for them to be "static inline" - gcc has no choice but to emit a copy in each translation unit that takes the address of one of these. Since they are now only referenced from qe_ic.c, just make them local to that file. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09powerpc/83xx: remove mpc83xx_ipic_and_qe_init_IRQRasmus Villemoes7-17/+5
This is now exactly the same as mpc83xx_ipic_init_IRQ, so just use that directly. Acked-by: Scott Wood <oss@buserror.net> Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: move calls of qe_ic_init out of arch/powerpc/Rasmus Villemoes13-102/+26
Having to call qe_ic_init() from platform-specific code makes it awkward to allow building the QE drivers for ARM. It's also a needless duplication of code, and slightly error-prone: Instead of the caller needing to know the details of whether the QUICC Engine High and QUICC Engine Low are actually the same interrupt (see e.g. the machine_is() in mpc85xx_mds_qeic_init), just let the init function choose the appropriate handlers after it has parsed the DT and figured it out. If the two interrupts are distinct, use separate handlers, otherwise use the handler which first checks the CHIVEC register (for the high priority interrupts), then the CIVEC. All existing callers pass 0 for flags, so continue to do that from the new single caller. Later cleanups will remove that argument from qe_ic_init and simplify the body, as well as make qe_ic_init into a proper init function for an IRQCHIP_DECLARE, eliminating the need to manually look up the fsl,qe-ic node. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: use qe_ic_cascade_{low, high}_mpic also on 83xxRasmus Villemoes2-21/+5
The *_ipic and *_mpic handlers are almost identical - the only difference is that the latter end with an unconditional chip->irq_eoi() call. Since IPIC does not have ->irq_eoi, we can reduce some code duplication by calling irq_eoi conditionally. This is similar to what is already done in mpc8xxx_gpio_irq_cascade(). This leaves the functions slightly misnamed, but that will be fixed in a subsequent patch. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: remove pointless sysfs registration in qe_ic.cRasmus Villemoes1-31/+0
There's no point in registering with sysfs when that doesn't actually allow any interaction with the device or driver (no uevents, no sysfs files that provide information or allow configuration, no nothing). Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: drop assign-only high_active in qe_ic_initRasmus Villemoes1-4/+2
high_active is only assigned to but never used. Remove it. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: drop unneeded #includesRasmus Villemoes2-7/+0
These includes are not actually needed, and asm/rheap.h and sysdev/fsl_soc.h are PPC-specific, hence prevent compiling QE for other architectures. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: qe.c: guard use of pvr_version_is() with CONFIG_PPC32Rasmus Villemoes1-1/+9
Commit e5c5c8d23fef (soc/fsl/qe: only apply QE_General4 workaround on affected SoCs) introduced use of pvr_version_is(), saying The QE_General4 workaround is only valid for the MPC832x and MPC836x SoCs. The other SoCs that embed a QUICC engine are not affected by this hardware bug and thus can use the computed divisors (this was successfully tested on the T1040). I'm reading the above as saying that the errata does not apply to the ARM-based SOCs with QUICC engine. In any case, use of pvr_version_is() must be guarded by CONFIG_PPC32 before we can remove the PPC32 dependency from CONFIG_QUICC_ENGINE, so introduce qe_general4_errata() to keep the necessary #ifdeffery localized to a trivial helper. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: replace spin_event_timeout by readx_poll_timeout_atomicRasmus Villemoes1-6/+7
In preparation for allowing QE to be built for architectures other than ppc, use the generic readx_poll_timeout_atomic() helper from iopoll.h rather than the ppc-only spin_event_timeout(). Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: avoid ppc-specific io accessorsRasmus Villemoes9-123/+129
In preparation for allowing to build QE support for architectures other than PPC, replace the ppc-specific io accessors by the qe_io* macros. Done via $ spatch --sp-file io.cocci --in-place drivers/soc/fsl/qe/ where io.cocci is @@ expression addr, val; @@ - out_be32(addr, val) + qe_iowrite32be(val, addr) @@ expression addr; @@ - in_be32(addr) + qe_ioread32be(addr) @@ expression addr, val; @@ - out_be16(addr, val) + qe_iowrite16be(val, addr) @@ expression addr; @@ - in_be16(addr) + qe_ioread16be(addr) @@ expression addr, val; @@ - out_8(addr, val) + qe_iowrite8(val, addr) @@ expression addr; @@ - in_8(addr) + qe_ioread8(addr) @@ expression addr, clr, set; @@ - clrsetbits_be32(addr, clr, set) + qe_clrsetbits_be32(addr, clr, set) @@ expression addr, clr, set; @@ - clrsetbits_be16(addr, clr, set) + qe_clrsetbits_be16(addr, clr, set) @@ expression addr, clr, set; @@ - clrsetbits_8(addr, clr, set) + qe_clrsetbits_8(addr, clr, set) @@ expression addr, set; @@ - setbits32(addr, set) + qe_setbits_be32(addr, set) @@ expression addr, set; @@ - setbits16(addr, set) + qe_setbits_be16(addr, set) @@ expression addr, set; @@ - setbits8(addr, set) + qe_setbits_8(addr, set) @@ expression addr, clr; @@ - clrbits32(addr, clr) + qe_clrbits_be32(addr, clr) @@ expression addr, clr; @@ - clrbits16(addr, clr) + qe_clrbits_be16(addr, clr) @@ expression addr, clr; @@ - clrbits8(addr, clr) + qe_clrbits_8(addr, clr) Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: introduce qe_io{read,write}* wrappersRasmus Villemoes1-9/+25
The QUICC engine drivers use the powerpc-specific out_be32() etc. In order to allow those drivers to build for other architectures, those must be replaced by iowrite32be(). However, on powerpc, out_be32() is a simple inline function while iowrite32be() is out-of-line. So in order not to introduce a performance regression on powerpc when making the drivers work on other architectures, introduce qe_io* helpers. Also define the qe_{clr,set,clrset}bits* helpers in terms of these new macros. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: rename qe_(clr/set/clrset)bit* helpersRasmus Villemoes3-16/+16
Make it clear that these operate on big-endian registers (i.e. use the iowrite*be primitives) before we introduce more uses of them and allow the QE drivers to be built for platforms other than ppc32. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: drop volatile qualifier of struct qe_ic::regsRasmus Villemoes2-3/+3
The actual io accessors (e.g. in_be32) implicitly add a volatile qualifier to their address argument. Remove volatile from the struct definition and the qe_ic_(read/write) helpers, in preparation for switching from the ppc-specific io accessors to generic ones. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: remove space-before-tabRasmus Villemoes1-2/+2
Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09Linux 5.5-rc1v5.5-rc1Linus Torvalds1-2/+2
2019-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds119-628/+1025
Pull networking fixes from David Miller: 1) More jumbo frame fixes in r8169, from Heiner Kallweit. 2) Fix bpf build in minimal configuration, from Alexei Starovoitov. 3) Use after free in slcan driver, from Jouni Hogander. 4) Flower classifier port ranges don't work properly in the HW offload case, from Yoshiki Komachi. 5) Use after free in hns3_nic_maybe_stop_tx(), from Yunsheng Lin. 6) Out of bounds access in mqprio_dump(), from Vladyslav Tarasiuk. 7) Fix flow dissection in dsa TX path, from Alexander Lobakin. 8) Stale syncookie timestampe fixes from Guillaume Nault. [ Did an evil merge to silence a warning introduced by this pull - Linus ] * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits) r8169: fix rtl_hw_jumbo_disable for RTL8168evl net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add() r8169: add missing RX enabling for WoL on RTL8125 vhost/vsock: accept only packets with the right dst_cid net: phy: dp83867: fix hfs boot in rgmii mode net: ethernet: ti: cpsw: fix extra rx interrupt inet: protect against too small mtu values. gre: refetch erspan header from skb->data after pskb_may_pull() pppoe: remove redundant BUG_ON() check in pppoe_pernet tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE() tcp: tighten acceptance of ACKs not matching a child socket tcp: fix rejected syncookies due to stale timestamps lpc_eth: kernel BUG on remove tcp: md5: fix potential overestimation of TCP option space net: sched: allow indirect blocks to bind to clsact in TC net: core: rename indirect block ingress cb function net-sysfs: Call dev_hold always in netdev_queue_add_kobject net: dsa: fix flow dissection on Tx path net/tls: Fix return values to avoid ENOTSUPP net: avoid an indirect call in ____sys_recvmsg() ...
2019-12-08Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds12-32/+36
Pull more SCSI updates from James Bottomley: "Eleven patches, all in drivers (no core changes) that are either minor cleanups or small fixes. They were late arriving, but still safe for -rc1" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: MAINTAINERS: Add the linux-scsi mailing list to the ISCSI entry scsi: megaraid_sas: Make poll_aen_lock static scsi: sd_zbc: Improve report zones error printout scsi: qla2xxx: Fix qla2x00_request_irqs() for MSI scsi: qla2xxx: unregister ports after GPN_FT failure scsi: qla2xxx: fix rports not being mark as lost in sync fabric scan scsi: pm80xx: Remove unused include of linux/version.h scsi: pm80xx: fix logic to break out of loop when register value is 2 or 3 scsi: scsi_transport_sas: Fix memory leak when removing devices scsi: lpfc: size cpu map by last cpu id set scsi: ibmvscsi_tgt: Remove unneeded variable rc
2019-12-08Merge tag '5.5-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds13-72/+265
Pull cifs fixes from Steve French: "Nine cifs/smb3 fixes: - one fix for stable (oops during oplock break) - two timestamp fixes including important one for updating mtime at close to avoid stale metadata caching issue on dirty files (also improves perf by using SMB2_CLOSE_FLAG_POSTQUERY_ATTRIB over the wire) - two fixes for "modefromsid" mount option for file create (now allows mode bits to be set more atomically and accurately on create by adding "sd_context" on create when modefromsid specified on mount) - two fixes for multichannel found in testing this week against different servers - two small cleanup patches" * tag '5.5-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: smb3: improve check for when we send the security descriptor context on create smb3: fix mode passed in on create for modetosid mount option cifs: fix possible uninitialized access and race on iface_list cifs: Fix lookup of SMB connections on multichannel smb3: query attributes on file close smb3: remove unused flag passed into close functions cifs: remove redundant assignment to pointer pneg_ctxt fs: cifs: Fix atime update check vs mtime CIFS: Fix NULL-pointer dereference in smb2_push_mandatory_locks
2019-12-08Merge branch 'work.misc' of ↵Linus Torvalds4-6/+5
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs cleanups from Al Viro: "No common topic, just three cleanups". * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: make __d_alloc() static fs/namespace: add __user to open_tree and move_mount syscalls fs/fnctl: fix missing __user in fcntl_rw_hint()
2019-12-08Merge tag 'ntb-5.5' of git://github.com/jonmason/ntbLinus Torvalds1-0/+1
Pull NTB update from Jon Mason: "Just a simple patch to add a new Hygon Device ID to the AMD NTB device driver" * tag 'ntb-5.5' of git://github.com/jonmason/ntb: NTB: Add Hygon Device ID
2019-12-08Merge branch 'for-linus' of ↵Linus Torvalds7-17/+51
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input updates from Dmitry Torokhov: - fixups for Synaptics RMI4 driver - a quirk for Goodinx touchscreen on Teclast tablet - a new keycode definition for activating privacy screen feature found on a few "enterprise" laptops - updates to snvs_pwrkey driver - polling uinput device for writing (which is always allowed) now works * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics-rmi4 - don't increment rmiaddr for SMBus transfers Input: synaptics-rmi4 - re-enable IRQs in f34v7_do_reflash Input: goodix - add upside-down quirk for Teclast X89 tablet Input: add privacy screen toggle keycode Input: uinput - fix returning EPOLLOUT from uinput_poll Input: snvs_pwrkey - remove gratuitous NULL initializers Input: snvs_pwrkey - send key events for i.MX6 S, DL and Q
2019-12-08Merge tag 'iomap-5.5-merge-14' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds1-12/+28
Pull iomap fixes from Darrick Wong: "Fix a race condition and a use-after-free error: - Fix a UAF when reporting writeback errors - Fix a race condition when handling page uptodate on fragmented file with blocksize < pagesize" * tag 'iomap-5.5-merge-14' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: stop using ioend after it's been freed in iomap_finish_ioend() iomap: fix sub-page uptodate handling
2019-12-08Merge tag 'xfs-5.5-merge-17' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds2-12/+17
Pull xfs fixes from Darrick Wong: "Fix a couple of resource management errors and a hang: - fix a crash in the log setup code when log mounting fails - fix a hang when allocating space on the realtime device - fix a block leak when freeing space on the realtime device" * tag 'xfs-5.5-merge-17' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix mount failure crash on invalid iclog memory access xfs: don't check for AG deadlock for realtime files in bunmapi xfs: fix realtime file data space leak
2019-12-08Merge tag 'for-linus-5.5-ofs1' of ↵Linus Torvalds3-7/+43
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux Pull orangefs update from Mike Marshall: "orangefs: posix open permission checking... Orangefs has no open, and orangefs checks file permissions on each file access. Posix requires that file permissions be checked on open and nowhere else. Orangefs-through-the-kernel needs to seem posix compliant. The VFS opens files, even if the filesystem provides no method. We can see if a file was successfully opened for read and or for write by looking at file->f_mode. When writes are flowing from the page cache, file is no longer available. We can trust the VFS to have checked file->f_mode before writing to the page cache. The mode of a file might change between when it is opened and IO commences, or it might be created with an arbitrary mode. We'll make sure we don't hit EACCES during the IO stage by using UID 0" [ This is "posixish", but not a great solution in the long run, since a proper secure network server shouldn't really trust the client like this. But proper and secure POSIX behavior requires an open method and a resulting cookie for IO of some kind, or similar. - Linus ] * tag 'for-linus-5.5-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: orangefs: posix open permission checking...
2019-12-08Merge tag 'nfsd-5.5' of git://linux-nfs.org/~bfields/linuxLinus Torvalds37-137/+343
Pull nfsd updates from Bruce Fields: "This is a relatively quiet cycle for nfsd, mainly various bugfixes. Possibly most interesting is Trond's fixes for some callback races that were due to my incomplete understanding of rpc client shutdown. Unfortunately at the last minute I've started noticing a new intermittent failure to send callbacks. As the logic seems basically correct, I'm leaving Trond's patches in for now, and hope to find a fix in the next week so I don't have to revert those patches" * tag 'nfsd-5.5' of git://linux-nfs.org/~bfields/linux: (24 commits) nfsd: depend on CRYPTO_MD5 for legacy client tracking NFSD fixing possible null pointer derefering in copy offload nfsd: check for EBUSY from vfs_rmdir/vfs_unink. nfsd: Ensure CLONE persists data and metadata changes to the target file SUNRPC: Fix backchannel latency metrics nfsd: restore NFSv3 ACL support nfsd: v4 support requires CRYPTO_SHA256 nfsd: Fix cld_net->cn_tfm initialization lockd: remove __KERNEL__ ifdefs sunrpc: remove __KERNEL__ ifdefs race in exportfs_decode_fh() nfsd: Drop LIST_HEAD where the variable it declares is never used. nfsd: document callback_wq serialization of callback code nfsd: mark cb path down on unknown errors nfsd: Fix races between nfsd4_cb_release() and nfsd4_shutdown_callback() nfsd: minor 4.1 callback cleanup SUNRPC: Fix svcauth_gss_proxy_init() SUNRPC: Trace gssproxy upcall results sunrpc: fix crash when cache_head become valid before update nfsd: remove private bin2hex implementation ...
2019-12-08Merge tag 'nfs-for-5.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds49-622/+1756
Pull NFS client updates from Trond Myklebust: "Highlights include: Features: - NFSv4.2 now supports cross device offloaded copy (i.e. offloaded copy of a file from one source server to a different target server). - New RDMA tracepoints for debugging congestion control and Local Invalidate WRs. Bugfixes and cleanups - Drop the NFSv4.1 session slot if nfs4_delegreturn_prepare waits for layoutreturn - Handle bad/dead sessions correctly in nfs41_sequence_process() - Various bugfixes to the delegation return operation. - Various bugfixes pertaining to delegations that have been revoked. - Cleanups to the NFS timespec code to avoid unnecessary conversions between timespec and timespec64. - Fix unstable RDMA connections after a reconnect - Close race between waking an RDMA sender and posting a receive - Wake pending RDMA tasks if connection fails - Fix MR list corruption, and clean up MR usage - Fix another RPCSEC_GSS issue with MIC buffer space" * tag 'nfs-for-5.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (79 commits) SUNRPC: Capture completion of all RPC tasks SUNRPC: Fix another issue with MIC buffer space NFS4: Trace lock reclaims NFS4: Trace state recovery operation NFSv4.2 fix memory leak in nfs42_ssc_open NFSv4.2 fix kfree in __nfs42_copy_file_range NFS: remove duplicated include from nfs4file.c NFSv4: Make _nfs42_proc_copy_notify() static NFS: Fallocate should use the nfs4_fattr_bitmap NFS: Return -ETXTBSY when attempting to write to a swapfile fs: nfs: sysfs: Remove NULL check before kfree NFS: remove unneeded semicolon NFSv4: add declaration of current_stateid NFSv4.x: Drop the slot if nfs4_delegreturn_prepare waits for layoutreturn NFSv4.x: Handle bad/dead sessions correctly in nfs41_sequence_process() nfsv4: Move NFSPROC4_CLNT_COPY_NOTIFY to end of list SUNRPC: Avoid RPC delays when exiting suspend NFS: Add a tracepoint in nfs_fh_to_dentry() NFSv4: Don't retry the GETATTR on old stateid in nfs4_delegreturn_done() NFSv4: Handle NFS4ERR_OLD_STATEID in delegreturn ...
2019-12-08smb3: improve check for when we send the security descriptor context on createSteve French1-0/+2
We had cases in the previous patch where we were sending the security descriptor context on SMB3 open (file create) in cases when we hadn't mounted with with "modefromsid" mount option. Add check for that mount flag before calling ad_sd_context in open init. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-12-08Merge tag 'vfio-v5.5-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds2-23/+5
Pull VFIO updates from Alex Williamson: - Remove hugepage checks for reserved pfns (Ben Luo) - Fix irq-bypass unregister ordering (Jiang Yi) * tag 'vfio-v5.5-rc1' of git://github.com/awilliam/linux-vfio: vfio/pci: call irq_bypass_unregister_producer() before freeing irq vfio/type1: remove hugepage checks in is_invalid_reserved_pfn()
2019-12-08Merge tag 'for-linus-5.5b-rc1-tag' of ↵Linus Torvalds8-62/+66
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: - a patch to fix a build warning - a cleanup of no longer needed code in the Xen event handling - a small series for the Xen grant driver avoiding high order allocations and replacing an insane global limit by a per-call one - a small series fixing Xen frontend/backend module referencing * tag 'for-linus-5.5b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen-blkback: allow module to be cleanly unloaded xen/xenbus: reference count registered modules xen/gntdev: switch from kcalloc() to kvcalloc() xen/gntdev: replace global limit of mapped pages by limit per call xen/gntdev: remove redundant non-zero check on ret xen/events: remove event handling recursion detection
2019-12-08Merge branch 'akpm' (patches from Andrew)Linus Torvalds3-178/+199
Merge misc Kconfig updates from Andrew Morton: "A number of changes to Kconfig files under lib/ from Changbin Du and Krzysztof Kozlowski" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: lib/: fix Kconfig indentation kernel-hacking: move DEBUG_FS to 'Generic Kernel Debugging Instruments' kernel-hacking: move DEBUG_BUGVERBOSE to 'printk and dmesg options' kernel-hacking: create a submenu for scheduler debugging options kernel-hacking: move SCHED_STACK_END_CHECK after DEBUG_STACK_USAGE kernel-hacking: move Oops into 'Lockups and Hangs' kernel-hacking: move kernel testing and coverage options to same submenu kernel-hacking: group kernel data structures debugging together kernel-hacking: create submenu for arch special debugging options kernel-hacking: group sysrq/kgdb/ubsan into 'Generic Kernel Debugging Instruments'
2019-12-08r8169: fix rtl_hw_jumbo_disable for RTL8168evlHeiner Kallweit1-1/+1
In referenced fix we removed the RTL8168e-specific jumbo config for RTL8168evl in rtl_hw_jumbo_enable(). We have to do the same in rtl_hw_jumbo_disable(). v2: fix referenced commit id Fixes: 14012c9f3bb9 ("r8169: fix jumbo configuration for RTL8168evl") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-08pipe: don't use 'pipe_wait() for basic pipe IOLinus Torvalds1-3/+27
pipe_wait() may be simple, but since it relies on the pipe lock, it means that we have to do the wakeup while holding the lock. That's unfortunate, because the very first thing the waked entity will want to do is to get the pipe lock for itself. So get rid of the pipe_wait() usage by simply releasing the pipe lock, doing the wakeup (if required) and then using wait_event_interruptible() to wait on the right condition instead. wait_event_interruptible() handles races on its own by comparing the wakeup condition before and after adding itself to the wait queue, so you can use an optimistic unlocked condition for it. Cc: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 14:32:23 +0300