summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-05-11Merge tag 'for-5.13-rc1-tag' of ↵Linus Torvalds11-26/+55
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "First batch of various fixes, here's a list of notable ones: - fix unmountable seed device after fstrim - fix silent data loss in zoned mode due to ordered extent splitting - fix race leading to unpersisted data and metadata on fsync - fix deadlock when cloning inline extents and using qgroups" * tag 'for-5.13-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: initialize return variable in cleanup_free_space_cache_v1 btrfs: zoned: sanity check zone type btrfs: fix unmountable seed device after fstrim btrfs: fix deadlock when cloning inline extents and using qgroups btrfs: fix race leading to unpersisted data and metadata on fsync btrfs: do not consider send context as valid when trying to flush qgroups btrfs: zoned: fix silent data loss after failure splitting ordered extent
2021-05-10ARC: mm: Use max_high_pfn as a HIGHMEM zone borderVladimir Isaev1-1/+10
Commit 4af22ded0ecf ("arc: fix memory initialization for systems with two memory banks") fixed highmem, but for the PAE case it causes bug messages: | BUG: Bad page state in process swapper pfn:80000 | page:(ptrval) refcount:0 mapcount:1 mapping:00000000 index:0x0 pfn:0x80000 flags: 0x0() | raw: 00000000 00000100 00000122 00000000 00000000 00000000 00000000 00000000 | raw: 00000000 | page dumped because: nonzero mapcount | Modules linked in: | CPU: 0 PID: 0 Comm: swapper Not tainted 5.12.0-rc5-00003-g1e43c377a79f #1 This is because the fix expects highmem to be always less than lowmem and uses min_low_pfn as an upper zone border for highmem. max_high_pfn should be ok for both highmem and highmem+PAE cases. Fixes: 4af22ded0ecf ("arc: fix memory initialization for systems with two memory banks") Signed-off-by: Vladimir Isaev <isaev@synopsys.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: stable@vger.kernel.org #5.8 onwards Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2021-05-10ARC: mm: PAE: use 40-bit physical page maskVladimir Isaev5-13/+19
32-bit PAGE_MASK can not be used as a mask for physical addresses when PAE is enabled. PAGE_MASK_PHYS must be used for physical addresses instead of PAGE_MASK. Without this, init gets SIGSEGV if pte_modify was called: | potentially unexpected fatal signal 11. | Path: /bin/busybox | CPU: 0 PID: 1 Comm: init Not tainted 5.12.0-rc5-00003-g1e43c377a79f-dirty | Insn could not be fetched | @No matching VMA found | ECR: 0x00040000 EFA: 0x00000000 ERET: 0x00000000 | STAT: 0x80080082 [IE U ] BTA: 0x00000000 | SP: 0x5f9ffe44 FP: 0x00000000 BLK: 0xaf3d4 | LPS: 0x000d093e LPE: 0x000d0950 LPC: 0x00000000 | r00: 0x00000002 r01: 0x5f9fff14 r02: 0x5f9fff20 | ... | Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Signed-off-by: Vladimir Isaev <isaev@synopsys.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: stable@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2021-05-10ARC: entry: fix off-by-one error in syscall number validationVineet Gupta1-2/+2
We have NR_syscall syscalls from [0 .. NR_syscall-1]. However the check for invalid syscall number is "> NR_syscall" as opposed to >=. This off-by-one error erronesously allows "NR_syscall" to be treated as valid syscall causeing out-of-bounds access into syscall-call table ensuing a crash (holes within syscall table have a invalid-entry handler but this is beyond the array implementing the table). This problem showed up on v5.6 kernel when testing glibc 2.33 (v5.10 kernel capable, includng faccessat2 syscall 439). The v5.6 kernel has NR_syscalls=439 (0 to 438). Due to the bug, 439 passed by glibc was not handled as -ENOSYS but processed leading to a crash. Link: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/48 Reported-by: Shahab Vahedi <shahab@synopsys.com> Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2021-05-10ARC: kgdb: add 'fallthrough' to prevent a warningRandy Dunlap1-0/+1
Use the 'fallthrough' macro to document that this switch case does indeed fall through to the next case. ../arch/arc/kernel/kgdb.c: In function 'kgdb_arch_handle_exception': ../arch/arc/kernel/kgdb.c:141:6: warning: this statement may fall through [-Wimplicit-fallthrough=] 141 | if (kgdb_hex2long(&ptr, &addr)) | ^ ../arch/arc/kernel/kgdb.c:144:2: note: here 144 | case 'D': | ^~~~ Cc: linux-snps-arc@lists.infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2021-05-10arc: Fix typos/spellosBhaskar Chowdhury4-9/+9
s/commiting/committing/ s/defintion/definition/ s/gaurantees/guarantees/ s/interrpted/interrupted/ s/interrutps/interrupts/ s/succeded/succeeded/ s/unconditonally/unconditionally/ Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2021-05-10Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds25-342/+542
Pull kvm fixes from Paolo Bonzini: - Lots of bug fixes. - Fix virtualization of RDPID - Virtualization of DR6_BUS_LOCK, which on bare metal is new to this release - More nested virtualization migration fixes (nSVM and eVMCS) - Fix for KVM guest hibernation - Fix for warning in SEV-ES SRCU usage - Block KVM from loading on AMD machines with 5-level page tables, due to the APM not mentioning how host CR4.LA57 exactly impacts the guest. * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (48 commits) KVM: SVM: Move GHCB unmapping to fix RCU warning KVM: SVM: Invert user pointer casting in SEV {en,de}crypt helpers kvm: Cap halt polling at kvm->max_halt_poll_ns tools/kvm_stat: Fix documentation typo KVM: x86: Prevent deadlock against tk_core.seq KVM: x86: Cancel pvclock_gtod_work on module removal KVM: x86: Prevent KVM SVM from loading on kernels with 5-level paging KVM: X86: Expose bus lock debug exception to guest KVM: X86: Add support for the emulation of DR6_BUS_LOCK bit KVM: PPC: Book3S HV: Fix conversion to gfn-based MMU notifier callbacks KVM: x86: Hide RDTSCP and RDPID if MSR_TSC_AUX probing failed KVM: x86: Tie Intel and AMD behavior for MSR_TSC_AUX to guest CPU model KVM: x86: Move uret MSR slot management to common x86 KVM: x86: Export the number of uret MSRs to vendor modules KVM: VMX: Disable loading of TSX_CTRL MSR the more conventional way KVM: VMX: Use common x86's uret MSR list as the one true list KVM: VMX: Use flag to indicate "active" uret MSRs instead of sorting list KVM: VMX: Configure list of user return MSRs at module init KVM: x86: Add support for RDPID without RDTSCP KVM: SVM: Probe and load MSR_TSC_AUX regardless of RDTSCP support in host ...
2021-05-10arm64: mte: initialize RGSR_EL1.SEED in __cpu_setupPeter Collingbourne1-0/+12
A valid implementation choice for the ChooseRandomNonExcludedTag() pseudocode function used by IRG is to behave in the same way as with GCR_EL1.RRND=0. This would mean that RGSR_EL1.SEED is used as an LFSR which must have a non-zero value in order for IRG to properly produce pseudorandom numbers. However, RGSR_EL1 is reset to an UNKNOWN value on soft reset and thus may reset to 0. Therefore we must initialize RGSR_EL1.SEED to a non-zero value in order to ensure that IRG behaves as expected. Signed-off-by: Peter Collingbourne <pcc@google.com> Fixes: 3b714d24ef17 ("arm64: mte: CPU feature detection and initial sysreg configuration") Cc: <stable@vger.kernel.org> # 5.10 Link: https://linux-review.googlesource.com/id/I2b089b6c7d6f17ee37e2f0db7df5ad5bcc04526c Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20210507185905.1745402-1-pcc@google.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-05-10PM: runtime: Fix unpaired parent child_count for force_resumeTony Lindgren2-3/+8
As pm_runtime_need_not_resume() relies also on usage_count, it can return a different value in pm_runtime_force_suspend() compared to when called in pm_runtime_force_resume(). Different return values can happen if anything calls PM runtime functions in between, and causes the parent child_count to increase on every resume. So far I've seen the issue only for omapdrm that does complicated things with PM runtime calls during system suspend for legacy reasons: omap_atomic_commit_tail() for omapdrm.0 dispc_runtime_get() wakes up 58000000.dss as it's the dispc parent dispc_runtime_resume() rpm_resume() increases parent child_count dispc_runtime_put() won't idle, PM runtime suspend blocked pm_runtime_force_suspend() for 58000000.dss, !pm_runtime_need_not_resume() __update_runtime_status() system suspended pm_runtime_force_resume() for 58000000.dss, pm_runtime_need_not_resume() pm_runtime_enable() only called because of pm_runtime_need_not_resume() omap_atomic_commit_tail() for omapdrm.0 dispc_runtime_get() wakes up 58000000.dss as it's the dispc parent dispc_runtime_resume() rpm_resume() increases parent child_count dispc_runtime_put() won't idle, PM runtime suspend blocked ... rpm_suspend for 58000000.dss but parent child_count is now unbalanced Let's fix the issue by adding a flag for needs_force_resume and use it in pm_runtime_force_resume() instead of pm_runtime_need_not_resume(). Additionally omapdrm system suspend could be simplified later on to avoid lots of unnecessary PM runtime calls and the complexity it adds. The driver can just use internal functions that are shared between the PM runtime and system suspend related functions. Fixes: 4918e1f87c5f ("PM / runtime: Rework pm_runtime_force_suspend/resume()") Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Cc: 4.16+ <stable@vger.kernel.org> # 4.16+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-05-10ACPI: scan: Fix a memory leak in an error handling pathChristophe JAILLET1-0/+1
If 'acpi_device_set_name()' fails, we must free 'acpi_device_bus_id->bus_id' or there is a (potential) memory leak. Fixes: eb50aaf960e3 ("ACPI: scan: Use unique number for instance_no") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-05-10block: uapi: fix comment about block device ioctlDamien Le Moal1-1/+1
Fix the comment mentioning ioctl command range used for zoned block devices to reflect the range of commands actually implemented. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Link: https://lore.kernel.org/r/20210509234806.3000-1-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-05-10hwmon: (ltc2992) Put fwnode in error case during ->probe()Andy Shevchenko1-2/+6
In each iteration fwnode_for_each_available_child_node() bumps a reference counting of a loop variable followed by dropping in on a next iteration, Since in error case the loop is broken, we have to drop a reference count by ourselves. Do it for port_fwnode in error case during ->probe(). Fixes: b0bd407e94b0 ("hwmon: (ltc2992) Add support") Cc: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210510100136.3303142-1-andy.shevchenko@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-05-10usb: typec: tcpm: Don't block probing of consumers of "connector" nodesSaravana Kannan3-1/+12
fw_devlink expects DT device nodes with "compatible" property to have struct devices created for them. Since the connector node might not be populated as a device, mark it as such so that fw_devlink knows not to wait on this fwnode being populated as a struct device. Without this patch, USB functionality can be broken on some boards. Fixes: f7514a663016 ("of: property: fw_devlink: Add support for remote-endpoint") Reported-by: John Stultz <john.stultz@linaro.org> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20210506004423.345199-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10usb: musb: Fix an error messageChristophe JAILLET1-1/+1
'ret' is known to be 0 here. Initialize 'ret' with the expected error code before using it. Fixes: 0990366bab3c ("usb: musb: Add support for MediaTek musb controller") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/69f514dc7134e3c917cad208e73cc650cb9e2bd6.1620159879.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10usb: typec: tcpm: Fix wrong handling for Not_Supported in VDM AMSKyle Tso1-2/+12
Not_Supported Message is acceptable in VDM AMS. Redirect the VDM state machine to VDM_STATE_DONE when receiving Not_Supported and finish the VDM AMS. Also, after the loop in vdm_state_machine_work, add more conditions of VDM states to clear the vdm_sm_running flag because those are all stopping states when leaving the loop. In addition, finish the VDM AMS if the port partner responds BUSY. Fixes: 8dea75e11380 ("usb: typec: tcpm: Protocol Error handling") Fixes: 8d3a0578ad1a ("usb: typec: tcpm: Respond Wait if VDM state machine is running") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Kyle Tso <kyletso@google.com> Link: https://lore.kernel.org/r/20210507062300.1945009-3-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated workKyle Tso1-10/+75
In current design, DISCOVER_IDENTITY is queued to VDM state machine immediately in Ready states and never retries if it fails in the AMS. Move the process to a delayed work so that when it fails for some reasons (e.g. Sink Tx No Go), it can be retried by queueing the work again. Also fix a problem that the vdm_state is not set to a proper state if it is blocked by Collision Avoidance mechanism. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Kyle Tso <kyletso@google.com> Link: https://lore.kernel.org/r/20210507062300.1945009-2-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10usb: typec: ucsi: Retrieve all the PDOs instead of just the first 4Jack Pham2-11/+36
commit 4dbc6a4ef06d ("usb: typec: ucsi: save power data objects in PD mode") introduced retrieval of the PDOs when connected to a PD-capable source. But only the first 4 PDOs are received since that is the maximum number that can be fetched at a time given the MESSAGE_IN length limitation (16 bytes). However, as per the PD spec a connected source may advertise up to a maximum of 7 PDOs. If such a source is connected it's possible the PPM could have negotiated a power contract with one of the PDOs at index greater than 4, and would be reflected in the request data object's (RDO) object position field. This would result in an out-of-bounds access when the rdo_index() is used to index into the src_pdos array in ucsi_psy_get_voltage_now(). With the help of the UBSAN -fsanitize=array-bounds checker enabled this exact issue is revealed when connecting to a PD source adapter that advertise 5 PDOs and the PPM enters a contract having selected the 5th one. [ 151.545106][ T70] Unexpected kernel BRK exception at EL1 [ 151.545112][ T70] Internal error: BRK handler: f2005512 [#1] PREEMPT SMP ... [ 151.545499][ T70] pc : ucsi_psy_get_prop+0x208/0x20c [ 151.545507][ T70] lr : power_supply_show_property+0xc0/0x328 ... [ 151.545542][ T70] Call trace: [ 151.545544][ T70] ucsi_psy_get_prop+0x208/0x20c [ 151.545546][ T70] power_supply_uevent+0x1a4/0x2f0 [ 151.545550][ T70] dev_uevent+0x200/0x384 [ 151.545555][ T70] kobject_uevent_env+0x1d4/0x7e8 [ 151.545557][ T70] power_supply_changed_work+0x174/0x31c [ 151.545562][ T70] process_one_work+0x244/0x6f0 [ 151.545564][ T70] worker_thread+0x3e0/0xa64 We can resolve this by instead retrieving and storing up to the maximum of 7 PDOs in the con->src_pdos array. This would involve two calls to the GET_PDOS command. Fixes: 992a60ed0d5e ("usb: typec: ucsi: register with power_supply class") Fixes: 4dbc6a4ef06d ("usb: typec: ucsi: save power data objects in PD mode") Cc: stable@vger.kernel.org Reported-and-tested-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Jack Pham <jackp@codeaurora.org> Link: https://lore.kernel.org/r/20210503074611.30973-1-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10hwmon: (pmbus/fsp-3y) Fix FSP-3Y YH-5151E non-compliant vout encodingVáclav Kubernát1-2/+25
I didn't properly test the driver for YH-5151E, so it was completely broken. Firstly, the log/real mapping was incorrect in one case. Secondly, PMBus specifies that output voltages should be in the linear16 encoding. However, the YH-5151E is non-compliant and uses linear11. YM-2151E isn't affected by this. Fix this by converting the values inside the read functions. linear16 gets the exponent from the VOUT_MODE command. The device doesn't support it, so I have to manually supply the value for it. Both supported devices have now been tested to report correct vout values. Fixes: 1734b4135a62 ("hwmon: Add driver for fsp-3y PSUs and PDUs") Signed-off-by: Václav Kubernát <kubernat@cesnet.cz> Link: https://lore.kernel.org/r/20210429075337.110502-1-kubernat@cesnet.cz Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-05-10hwmon: (occ) Fix poll rate limitingEddie James2-3/+4
The poll rate limiter time was initialized at zero. This breaks the comparison in time_after if jiffies is large. Switch to storing the next update time rather than the previous time, and initialize the time when the device is probed. Fixes: c10e753d43eb ("hwmon (occ): Add sensor types and versions") Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210429151336.18980-1-eajames@linux.ibm.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-05-10hwmon: (corsair-psu) Remove unneeded semicolonsWan Jiabing1-2/+2
Fix the following coccicheck warning: ./drivers/hwmon/corsair-psu.c:379:2-3: Unneeded semicolon Remove unneeded semicolons. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Link: https://lore.kernel.org/r/20210427044219.7799-1-wanjiabing@vivo.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-05-10usb: fotg210-hcd: Fix an error messageChristophe JAILLET1-2/+2
'retval' is known to be -ENODEV here. This is a hard-coded default error code which is not useful in the error message. Moreover, another error message is printed at the end of the error handling path. The corresponding error code (-ENOMEM) is more informative. So remove simplify the first error message. While at it, also remove the useless initialization of 'retval'. Fixes: 7d50195f6c50 ("usb: host: Faraday fotg210-hcd driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/94531bcff98e46d4f9c20183a90b7f47f699126c.1620333419.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10docs: usb: function: Modify path nameWei Ming Chen1-1/+1
Original path does not exists, so changed to "Documentation/ABI/testing/configfs-usb-gadget" Signed-off-by: Wei Ming Chen <jj251510319013@gmail.com> Link: https://lore.kernel.org/r/20210506122020.7117-1-jj251510319013@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10usb: dwc3: omap: improve extcon initializationMarcel Hamer1-0/+5
When extcon is used in combination with dwc3, it is assumed that the dwc3 registers are untouched and as such are only configured if VBUS is valid or ID is tied to ground. In case VBUS is not valid or ID is floating, the registers are not configured as such during driver initialization, causing a wrong default state during boot. If the registers are not in a default state, because they are for instance touched by a boot loader, this can cause for a kernel error. Signed-off-by: Marcel Hamer <marcel@solidxs.se> Link: https://lore.kernel.org/r/20210427122118.1948340-1-marcel@solidxs.se Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10usb: typec: ucsi: Put fwnode in any case during ->probe()Andy Shevchenko1-1/+4
device_for_each_child_node() bumps a reference counting of a returned variable. We have to balance it whenever we return to the caller. Fixes: c1b0bc2dabfa ("usb: typec: Add support for UCSI interface") Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210504222337.3151726-1-andy.shevchenko@gmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10iio: tsl2583: Fix division by a zero lux_valColin Ian King1-0/+8
The lux_val returned from tsl2583_get_lux can potentially be zero, so check for this to avoid a division by zero and an overflowed gain_trim_val. Fixes clang scan-build warning: drivers/iio/light/tsl2583.c:345:40: warning: Either the condition 'lux_val<0' is redundant or there is division by zero at line 345. [zerodivcond] Fixes: ac4f6eee8fe8 ("staging: iio: TAOS tsl258x: Device driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-10iio: core: return ENODEV if ioctl is unknownAlexandru Ardelean1-2/+1
When the ioctl() mechanism was introduced in IIO core to centralize the registration of all ioctls in one place via commit 8dedcc3eee3ac ("iio: core: centralize ioctl() calls to the main chardev"), the return code was changed from ENODEV to EINVAL, when the ioctl code isn't known. This was done by accident. This change reverts back to the old behavior, where if the ioctl() code isn't known, ENODEV is returned (vs EINVAL). This was brought into perspective by this patch: https://lore.kernel.org/linux-iio/20210428150815.136150-1-paul@crapouillou.net/ Fixes: 8dedcc3eee3ac ("iio: core: centralize ioctl() calls to the main chardev") Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Tested-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-10iio: core: fix ioctl handlers removalTomasz Duszynski1-6/+0
Currently ioctl handlers are removed twice. For the first time during iio_device_unregister() then later on inside iio_device_unregister_eventset() and iio_buffers_free_sysfs_and_mask(). Double free leads to kernel panic. Fix this by not touching ioctl handlers list directly but rather letting code responsible for registration call the matching cleanup routine itself. Fixes: 8dedcc3eee3ac ("iio: core: centralize ioctl() calls to the main chardev") Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com> Acked-by: Alexandru Ardelean <ardeleanalex@gmail.com> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210423080244.2790-1-tomasz.duszynski@octakon.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-10iio: gyro: mpu3050: Fix reported temperature valueDmitry Osipenko1-2/+11
The raw temperature value is a 16-bit signed integer. The sign casting is missing in the code, which results in a wrong temperature reported by userspace tools, fix it. Cc: stable@vger.kernel.org Fixes: 3904b28efb2c ("iio: gyro: Add driver for the MPU-3050 gyroscope") Datasheet: https://www.cdiweb.com/datasheets/invensense/mpu-3000a.pdf Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # Asus TF201 Reported-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Andy Shevchenko <Andy.Shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Link: https://lore.kernel.org/r/20210423020959.5023-1-digetx@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-10iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGERAlexandru Ardelean9-10/+1
During commit 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger"), the iio_triggered_buffer_{setup,cleanup}() functions got moved under the hid-sensor-trigger module. The above change works fine, if any of the sensors get built. However, when only the common hid-sensor-trigger module gets built (and none of the drivers), then the IIO_TRIGGERED_BUFFER symbol isn't selected/enforced. Previously, each driver would enforce/select the IIO_TRIGGERED_BUFFER symbol. With this change the HID_SENSOR_IIO_TRIGGER (for the hid-sensor-trigger module) will enforce that IIO_TRIGGERED_BUFFER gets selected. All HID sensor drivers select the HID_SENSOR_IIO_TRIGGER symbol. So, this change removes the IIO_TRIGGERED_BUFFER enforcement from each driver. Fixes: 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger") Reported-by: Thomas Deutschmann <whissi@gentoo.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20210414084955.260117-1-aardelean@deviqon.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-10iio: proximity: pulsedlight: Fix rumtime PM imbalance on errorDinghao Liu1-0/+1
When lidar_write_control() fails, a pairing PM usage counter decrement is needed to keep the counter balanced. Fixes: 4ac4e086fd8c5 ("iio: pulsedlight-lidar-lite: add runtime PM") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210412053204.4889-1-dinghao.liu@zju.edu.cn Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-10iio: light: gp2ap002: Fix rumtime PM imbalance on errorDinghao Liu1-2/+3
When devm_request_threaded_irq() fails, we should decrease the runtime PM counter to keep the counter balanced. But when iio_device_register() fails, we need not to decrease it because we have already decreased it before. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Fixes: 97d642e23037 ("iio: light: Add a driver for Sharp GP2AP002x00F") Link: https://lore.kernel.org/r/20210407034927.16882-1-dinghao.liu@zju.edu.cn Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-10usb: typec: tcpm: Fix wrong handling in GET_SINK_CAPKyle Tso1-1/+1
After receiving Sink Capabilities Message in GET_SINK_CAP AMS, it is incorrect to call tcpm_pd_handle_state because the Message is expected and the current state is not Ready states. The result of this incorrect operation ends in Soft Reset which is definitely wrong. Simply forwarding to Ready States is enough to finish the AMS. Fixes: 8dea75e11380 ("usb: typec: tcpm: Protocol Error handling") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Kyle Tso <kyletso@google.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210503171849.2605302-1-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10usb: dwc2: Remove obsolete MODULE_ constants from platform.cMatthijs Kooijman1-4/+0
Originally, the core and platform drivers were separate modules, so each had its own module info. Since commit 2d1165a4b95e (usb: dwc2: remove dwc2_platform.ko) platform.c is included in the core module, which now contains duplicate module info (from core.c and platform.c). Due to the linking order and modinfo implementation, running `modinfo` on the resulting dwc2.ko shows just the info from platform.c, rather than that from core.c, suggesting that I am the author of the entire dwc2 module. Since platform.c is just a minor part of the entire module, this removes its module info in favor of the info from core.c. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Link: https://lore.kernel.org/r/20210503180538.64423-1-matthijs@stdin.nl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10usb: dwc3: imx8mp: fix error return code in dwc3_imx8mp_probe()Zhen Lei1-0/+1
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 6dd2565989b4 ("usb: dwc3: add imx8mp dwc3 glue layer driver") Reported-by: Hulk Robot <hulkci@huawei.com> Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210508015310.1627-1-thunder.leizhen@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10usb: dwc3: imx8mp: detect dwc3 core node via compatible stringLi Jun1-1/+1
New schema of usb controller DT-node should be named with prefix "^usb(@.*)?", dt changed the node name, but missed counter part change in driver, fix it by switching to use compatible string as the dwc3 core compatible string keeps "snps,dwc3" in all dt. Fixes: d1689cd3c0f4 ("arm64: dts: imx8mp: Use the correct name for child node "snps, dwc3"") Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/1619765836-20387-1-git-send-email-jun.li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10usb: dwc3: gadget: Return success always for kick transfer in ep queueWesley Cheng1-1/+3
If an error is received when issuing a start or update transfer command, the error handler will stop all active requests (including the current USB request), and call dwc3_gadget_giveback() to notify function drivers of the requests which have been stopped. Avoid returning an error for kick transfer during EP queue, to remove duplicate cleanup operations on the request being queued. Fixes: 8d99087c2db8 ("usb: dwc3: gadget: Properly handle failed kick_transfer") cc: stable@vger.kernel.org Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Link: https://lore.kernel.org/r/1620410119-24971-1-git-send-email-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10usb: dwc3: gadget: Free gadget structure only after freeing endpointsJack Pham1-1/+2
As part of commit e81a7018d93a ("usb: dwc3: allocate gadget structure dynamically") the dwc3_gadget_release() was added which will free the dwc->gadget structure upon the device's removal when usb_del_gadget_udc() is called in dwc3_gadget_exit(). However, simply freeing the gadget results a dangling pointer situation: the endpoints created in dwc3_gadget_init_endpoints() have their dep->endpoint.ep_list members chained off the list_head anchored at dwc->gadget->ep_list. Thus when dwc->gadget is freed, the first dwc3_ep in the list now has a dangling prev pointer and likewise for the next pointer of the dwc3_ep at the tail of the list. The dwc3_gadget_free_endpoints() that follows will result in a use-after-free when it calls list_del(). This was caught by enabling KASAN and performing a driver unbind. The recent commit 568262bf5492 ("usb: dwc3: core: Add shutdown callback for dwc3") also exposes this as a panic during shutdown. There are a few possibilities to fix this. One could be to perform a list_del() of the gadget->ep_list itself which removes it from the rest of the dwc3_ep chain. Another approach is what this patch does, by splitting up the usb_del_gadget_udc() call into its separate "del" and "put" components. This allows dwc3_gadget_free_endpoints() to be called before the gadget is finally freed with usb_put_gadget(). Fixes: e81a7018d93a ("usb: dwc3: allocate gadget structure dynamically") Reviewed-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Jack Pham <jackp@codeaurora.org> Link: https://lore.kernel.org/r/20210501093558.7375-1-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10usb: dwc2: Fix gadget DMA unmap directionPhil Elwell2-1/+4
The dwc2 gadget support maps and unmaps DMA buffers as necessary. When mapping and unmapping it uses the direction of the endpoint to select the direction of the DMA transfer, but this fails for Control OUT transfers because the unmap occurs after the endpoint direction has been reversed for the status phase. A possible solution would be to unmap the buffer before the direction is changed, but a safer, less invasive fix is to remember the buffer direction independently of the endpoint direction. Fixes: fe0b94abcdf6 ("usb: dwc2: gadget: manage ep0 state in software") Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Phil Elwell <phil@raspberrypi.com> Link: https://lore.kernel.org/r/20210506112200.2893922-1-phil@raspberrypi.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10usb: dwc3: gadget: Rename EOPF event macros to SuspendJack Pham3-9/+9
The device event corresponding to End of Periodic Frame is only found on older IP revisions (2.10a and prior, according to a cursory SNPS databook search). On revisions 2.30a and newer, including DWC3.1, the same event value and corresponding DEVTEN bit were repurposed to indicate that the link has gone into suspend state (U3 or L2/L1). EOPF events had never been enabled before in this driver, and going forward we expect current and future DWC3-based devices won't likely to be using such old DWC3 IP revisions either. Hence rather than keeping the deprecated EOPF macro names let's rename them to indicate their usage for suspend events. Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Jack Pham <jackp@codeaurora.org> Link: https://lore.kernel.org/r/20210428090111.3370-2-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10usb: dwc3: gadget: Enable suspend eventsJack Pham1-0/+4
commit 72704f876f50 ("dwc3: gadget: Implement the suspend entry event handler") introduced (nearly 5 years ago!) an interrupt handler for U3/L1-L2 suspend events. The problem is that these events aren't currently enabled in the DEVTEN register so the handler is never even invoked. Fix this simply by enabling the corresponding bit in dwc3_gadget_enable_irq() using the same revision check as found in the handler. Fixes: 72704f876f50 ("dwc3: gadget: Implement the suspend entry event handler") Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Jack Pham <jackp@codeaurora.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210428090111.3370-1-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10usb: Restore the reference to ch9.hFabio Estevam1-6/+9
Keep the textual reference to ch9.h as it was prior to commit caa93d9bd2d7 ("usb: Fix up movement of USB core kerneldoc location"). As linux/usb/ch9.h does not contain comments anymore, explain that drivers/usb/common/common.c includes such header and provides declarations of a few utilities routines for manipulating the data types from ch9.h. Also mention that drivers/usb/common/debug.c contains some functions for creating debug output. Fixes: caa93d9bd2d7 ("usb: Fix up movement of USB core kerneldoc location") Reported-by: Alan Stern <stern@rowland.harvard.edu> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20210425153253.2542816-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10usb: dwc3: core: Add missing GHWPARAMS9 docThinh Nguyen1-0/+1
Add missing documentation for struct dwc3_hwparams new field hwparams9 to avoid kernel doc build warning. Fixes: 16710380d3aa ("usb: dwc3: Capture new capability register GHWPARAMS9") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/f4c491f7614e623755fafe640b7e690e7c5634e2.1619471127.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10usb: dwc3: pci: Enable usb2-gadget-lpm-disable for Intel MerrifieldFerry Toth1-0/+1
On Intel Merrifield LPM is causing host to reset port after a timeout. By disabling LPM entirely this is prevented. Fixes: 066c09593454 ("usb: dwc3: pci: Enable extcon driver for Intel Merrifield") Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ferry Toth <ftoth@exalondelft.nl> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210425150947.5862-1-ftoth@exalondelft.nl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10cdc-wdm: untangle a circular dependency between callback and softintOliver Neukum1-8/+22
We have a cycle of callbacks scheduling works which submit URBs with those callbacks. This needs to be blocked, stopped and unblocked to untangle the circle. Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20210426092622.20433-1-oneukum@suse.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10staging: rtl8723bs: avoid bogus gcc warningArnd Bergmann2-19/+25
gcc gets confused by some of the type casts and produces an apparently senseless warning about an out-of-bound memcpy to an unrelated array in the same structure: drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c: In function 'rtw_cfg80211_ap_set_encryption': cc1: error: writing 8 bytes into a region of size 0 [-Werror=stringop-overflow=] In file included from drivers/staging/rtl8723bs/include/drv_types.h:32, from drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c:10: drivers/staging/rtl8723bs/include/rtw_security.h:98:15: note: at offset [184, 4264] into destination object 'dot11AuthAlgrthm' of size 4 98 | u32 dot11AuthAlgrthm; /* 802.11 auth, could be open, shared, 8021x and authswitch */ | ^~~~~~~~~~~~~~~~ cc1: error: writing 8 bytes into a region of size 0 [-Werror=stringop-overflow=] drivers/staging/rtl8723bs/include/rtw_security.h:98:15: note: at offset [264, 4344] into destination object 'dot11AuthAlgrthm' of size 4 This is a known gcc bug, and the patch here is only a workaround, but the approach of using a temporary variable to hold a pointer to the key also improves readability in addition to avoiding the warning, so overall this should still help. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99673 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210422152648.2891996-1-arnd@kernel.org Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10spi: tegra210-quad: Fix an error messageChristophe JAILLET1-1/+1
'ret' is known to be 0 here. No error code is available, so just remove it from the error message. Fixes: 921fc1838fb0 ("spi: tegra210-quad: Add support for Tegra210 QSPI controller") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/b990c1bb5830196142c3d70e3e3c6c0245a7e75f.1620404705.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-10spi: tegra114: Fix an error messageChristophe JAILLET1-2/+1
'ret' is known to be 0 here. No error code is available, so just remove it from the error message. Fixes: f333a331ad ("spi/tegra114: add spi driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/e2593974c9484b7055177ad0c9237c8e343946be.1620399829.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-10spi: omap-100k: Fix the length judgment problemTian Tao1-1/+1
word_len should be checked in the omap1_spi100k_setup_transfer function to see if it exceeds 32. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Link: https://lore.kernel.org/r/1619695248-39045-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-10spi: dw-apb-ssi: Integrate Renesas RZ/N1 SPI controllerGeert Uytterhoeven2-11/+6
Originally, the Renesas RZ/N1 SPI Controller DT bindings were not integrated in the main DT bindings for the Synopsys DesignWare Synchronous Serial Interface, but in its own file, as the RZ/N1 controller has additional registers for software CS control and DMA. As so far DMA is not supported on RZ/N1, and json-schema can handle any possible differences fine, integrate the RZ/N1 compatible values in the main DT bindings for the Synopsys DW SSI. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/aef15aa119ed02487ded4691141678bc1040c3b4.1620301936.git.geert+renesas@glider.be Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-10spi: spi-topcliff-pch: Fix potential double free in pch_spi_process_messages()Jay Fang1-1/+3
pch_spi_set_tx() frees data->pkt_tx_buff on failure of kzalloc() for data->pkt_rx_buff, but its caller, pch_spi_process_messages(), will free data->pkt_tx_buff again. Set data->pkt_tx_buff to NULL after kfree() to avoid double free. Signed-off-by: Jay Fang <f.fangjian@huawei.com> Link: https://lore.kernel.org/r/1620284888-65215-1-git-send-email-f.fangjian@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 22:24:17 +0300