| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
libiscsi is the only SCSI code that return BLK_EH_HANDLED, thus trying to
bypass the normal SCSI EH code. We are going to remove this return value
at the block layer, and at least from a quick look it doesn't look too
harmful to try to send an abort for these cases, especially as the first
one should not actually be possible. If this doesn't work out iscsi
will probably need its own eh_strategy_handler instead to just do the
right thing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
By completing the request entirely in the driver we can remove the
BLK_EH_HANDLED return value and thus the split responsibility between the
driver and the block layer that has been causing trouble.
[While this keeps existing behavior it seems to mismatch the comment,
maintainers please chime in!]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
By completing the request entirely in the driver we can remove the
BLK_EH_HANDLED return value and thus the split responsibility between the
driver and the block layer that has been causing trouble.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
By completing the request entirely in the driver we can remove the
BLK_EH_HANDLED return value and thus the split responsibility between the
driver and the block layer that has been causing trouble.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
By completing the request entirely in the driver we can remove the
BLK_EH_HANDLED return value and thus the split responsibility between the
driver and the block layer that has been causing trouble.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
By completing the request entirely in the driver we can remove the
BLK_EH_HANDLED return value and thus the split responsibility between the
driver and the block layer that has been causing trouble.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
NVMe always completes the request before returning from ->timeout, either
by polling for it, or by disabling the controller. Return BLK_EH_DONE so
that the block layer doesn't even try to complete it again.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The BLK_EH_NOT_HANDLED implies nothing happen, but very often that
is not what is happening - instead the driver already completed the
command. Fix the symbolic name to reflect that a little better.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch simplifies the timeout handling by relying on the request
reference counting to ensure the iterator is operating on an inflight
and truly timed out request. Since the reference counting prevents the
tag from being reallocated, the block layer no longer needs to prevent
drivers from completing their requests while the timeout handler is
operating on it: a driver completing a request is allowed to proceed to
the next state without additional syncronization with the block layer.
This also removes any need for generation sequence numbers since the
request lifetime is prevented from being reallocated as a new sequence
while timeout handling is operating on it.
To enables this a refcount is added to struct request so that request
users can be sure they're operating on the same request without it
changing while they're processing it. The request's tag won't be
released for reuse until both the timeout handler and the completion
are done with it.
Signed-off-by: Keith Busch <keith.busch@intel.com>
[hch: slight cleanups, added back submission side hctx lock, use cmpxchg
for completions]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Check for 0xE00 (RECOVERABLE_ERR) along with ARMFW UE (0x0)
in be_detect_error() to know whether the error is valid error or not
Fixes: 673c96e5a ("be2net: Fix UE detection logic for BE3")
Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for Netgear Aircard 779S
Signed-off-by: Josh Hill <josh@joshuajhill.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The block layer had been setting the state to in-flight prior to updating
the timer. This is the wrong order since the timeout handler could observe
the in-flight state with the older timeout, believing the request had
expired when in fact it is just getting started.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
As far as I can tell this function can't even be called any more, given
that ATA implements its own eh_strategy_handler with ata_scsi_error, which
never calls ->eh_timed_out.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Switch to the generic noncoherent direct mapping implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Greentime Hu <greentime@andestech.com>
Tested-by: Greentime Hu <greentime@andestech.com>
|
|
This matches the implementation of the more commonly used unmap_single
routines and the sync_sg_for_cpu method which should provide equivalent
cache maintainance.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Greentime Hu <greentime@andestech.com>
Tested-by: Greentime Hu <greentime@andestech.com>
|
|
Make sure all other DMA methods call nds32_dma_sync_single_for_{device,cpu}
to perform cache maintaince, and remove the consisteny_sync helper that
implemented both with entirely separate code based off an argument.
Also make sure these helpers handled highmem properly, for which code
is copy and pasted from mips.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Greentime Hu <greentime@andestech.com>
Tested-by: Greentime Hu <greentime@andestech.com>
|
|
VLAN 1 is internally used for untagged traffic. Prevent creation of
explicit netdevice for that VLAN, because that currently isn't supported
and leads to the NULL pointer dereference cited below.
Fix by preventing creation of VLAN devices with VID of 1 over mlxsw
devices or LAG devices that involve mlxsw devices.
[ 327.175816] ================================================================================
[ 327.184544] UBSAN: Undefined behaviour in drivers/net/ethernet/mellanox/mlxsw/spectrum_fid.c:200:12
[ 327.193667] member access within null pointer of type 'const struct mlxsw_sp_fid'
[ 327.201226] CPU: 0 PID: 8983 Comm: ip Not tainted 4.17.0-rc4-petrm_net_ip6gre_headroom-custom-140 #11
[ 327.210496] Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2F"/"SA000874", BIOS 4.6.5 03/08/2016
[ 327.219872] Call Trace:
[ 327.222384] dump_stack+0xc3/0x12b
[ 327.234007] ubsan_epilogue+0x9/0x49
[ 327.237638] ubsan_type_mismatch_common+0x1f9/0x2d0
[ 327.255769] __ubsan_handle_type_mismatch+0x90/0xa7
[ 327.264716] mlxsw_sp_fid_type+0x35/0x50 [mlxsw_spectrum]
[ 327.270255] mlxsw_sp_port_vlan_router_leave+0x46/0xc0 [mlxsw_spectrum]
[ 327.277019] mlxsw_sp_inetaddr_port_vlan_event+0xe1/0x340 [mlxsw_spectrum]
[ 327.315031] mlxsw_sp_netdevice_vrf_event+0xa8/0x100 [mlxsw_spectrum]
[ 327.321626] mlxsw_sp_netdevice_event+0x276/0x430 [mlxsw_spectrum]
[ 327.367863] notifier_call_chain+0x4c/0x150
[ 327.372128] __netdev_upper_dev_link+0x1b3/0x260
[ 327.399450] vrf_add_slave+0xce/0x170 [vrf]
[ 327.403703] do_setlink+0x658/0x1d70
[ 327.508998] rtnl_newlink+0x908/0xf20
[ 327.559128] rtnetlink_rcv_msg+0x50c/0x720
[ 327.571720] netlink_rcv_skb+0x16a/0x1f0
[ 327.583450] netlink_unicast+0x2ca/0x3e0
[ 327.599305] netlink_sendmsg+0x3e2/0x7f0
[ 327.616655] sock_sendmsg+0x76/0xc0
[ 327.620207] ___sys_sendmsg+0x494/0x5d0
[ 327.666117] __sys_sendmsg+0xc2/0x130
[ 327.690953] do_syscall_64+0x66/0x370
[ 327.694677] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 327.699782] RIP: 0033:0x7f4c2f3f8037
[ 327.703393] RSP: 002b:00007ffe8c389708 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 327.711035] RAX: ffffffffffffffda RBX: 000000005b03f53e RCX: 00007f4c2f3f8037
[ 327.718229] RDX: 0000000000000000 RSI: 00007ffe8c389760 RDI: 0000000000000003
[ 327.725431] RBP: 00007ffe8c389760 R08: 0000000000000000 R09: 00007f4c2f443630
[ 327.732632] R10: 00000000000005eb R11: 0000000000000246 R12: 0000000000000000
[ 327.739833] R13: 00000000006774e0 R14: 00007ffe8c3897e8 R15: 0000000000000000
[ 327.747096] ================================================================================
Fixes: 9589a7b5d7d9 ("mlxsw: spectrum: Handle VLAN devices linking / unlinking")
Suggested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
memcmp() returns int, but eprom_try_esi() cast it to unsigned char. One
can lose significant bits and get 0 from non-0 value returned by the
memcmp().
Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This parameter has been around since commit e162b39a368f ("softlockup:
decouple hung tasks check from softlockup detection") in 2009 but was
never documented.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The are terms that seem obvious to the mm developers, but may be somewhat
obscure for, say, less involved readers.
The concepts overview can be seen as an "extended glossary" that introduces
such terms to the readers of the kernel documentation.
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
After the userspace interface description for KSM and THP was split to
Documentation/admin-guide/mm, the remaining parts belong to the section
describing MM internals.
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Now that we have kerneldoc comments for
memalloc_no{fs,io}_{save_restore}(), go ahead and pull them into the docs.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Although the api is documented in the source code Ted has pointed out
that there is no mention in the core-api Documentation and there are
people looking there to find answers how to use a specific API.
Requested-by: "Theodore Y. Ts'o" <tytso@mit.edu>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"While writing selftests for a new feature, I triggered two existing
bugs that deal with triggers and instances.
- a generic trigger bug where the triggers are not removed from a
linked list properly when deleting an instance.
- a bug specific to snapshots, where the snapshot is done in the top
level buffer, when it is supposed to snapshot the buffer associated
to the instance the snapshot trigger exists in"
* tag 'trace-v4.17-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Make the snapshot trigger work with instances
tracing: Fix crash when freeing instances with event triggers
|
|
nospec quite reasonably asserts that it will never be used with an index
larger than unsigned long (that being the largest possibly index into an
C array). However, our ubi uses the convention of u64 for any large
integer, running afoul of the assertion on 32b. Reduce our index to an
unsigned long, checking for type overflow first.
drivers/gpu/drm/i915/i915_query.c: In function 'i915_query_ioctl':
include/linux/compiler.h:339:38: error: call to '__compiletime_assert_119' declared with attribute error: BUILD_BUG_ON failed: sizeof(_s) > sizeof(long)
Reported-by: kbuild-all@01.org
Fixes: 84b510e22da7 ("drm/i915/query: Protect tainted function pointer lookup")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180522121018.15199-1-chris@chris-wilson.co.uk
(cherry picked from commit a33b1dc8a732144e11cb4bf067d24ba51e6b8ab0)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
The highmem conversion caused a build error in some configurations:
drivers/mmc/host/mxcmmc.c: In function 'mxcmci_transfer_data':
drivers/mmc/host/mxcmmc.c:622:10: error: implicit declaration of function 'kmap_atomic'; did you mean 'in_atomic'? [-Werror=implicit-function-declaration]
This includes the correct header file.
Fixes: b189e7589f6d ("mmc: mxcmmc: handle highmem pages")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The newly added runtime-pm functions cause a harmless warning
when CONFIG_PM is disabled:
drivers/mmc/host/sunxi-mmc.c:1452:12: error: 'sunxi_mmc_runtime_suspend' defined but not used [-Werror=unused-function]
static int sunxi_mmc_runtime_suspend(struct device *dev)
^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/mmc/host/sunxi-mmc.c:1435:12: error: 'sunxi_mmc_runtime_resume' defined but not used [-Werror=unused-function]
static int sunxi_mmc_runtime_resume(struct device *dev)
This marks them as __maybe_unused to shut up the warning.
Fixes: 9a8e1e8cc2c0 ("mmc: sunxi: Add runtime_pm support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This drastically reduces the rate at which the MMC_SEND_STATUS cmd polls
for completion of the MMC Erase operation. The patch does this by adding
a backoff sleep that starts by sleeping for short intervals (128-256us),
and ramps up to sleeping for 32-64ms.
Even on very quickly completing erase operations, the loop iterates a few
times, so not too much extra latency is added to these commands.
For long running discard operarations, like a full-device secure discard,
this change drops the interrupt rates on my single-core NXP I.MX6UL from
45000/s to about 20/s, and greatly improves system responsiveness.
Signed-off-by: Martin Hicks <mort@bork.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use kmap_atomic to map the scatterlist entry before using it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This change uses the appropriate _cansleep or non-sleeping API for
reading GPIO card detect state. This allows users with GPIOs that
never sleep to avoid a warning when certain quirks are present.
The sdhci controller has an SDHCI_QUIRK_NO_CARD_NO_RESET, which
indicates that a controller will not reset properly if no card is
inserted. With this quirk enabled, mmc_get_cd_gpio is called in
several places with a spinlock held and interrupts disabled.
gpiod_get_raw_value_cansleep is not happy with this situation,
and throws out a warning.
For boards that a) use controllers that have this quirk, and b) wire
card detect up to a GPIO that doesn't sleep, this is a spurious warning.
This change silences that warning, at the cost of pushing this problem
down to users that have sleeping GPIOs and controllers with this quirk.
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
I noticed below error msg with sdhci-pxav3 on some berlin platforms:
[.....] sdhci-pxav3 f7ab0000.sdhci failed to add host
It is due to getting related vmmc or vqmmc regulator returns
-EPROBE_DEFER. It doesn't matter at all but it's confusing.
>From another side, if driver probing fails and the error number isn't
-EPROBE_DEFER, the core will tell us something as below:
[.....] sdhci-pxav3: probe of f7ab0000.sdhci failed with error -EXX
So it's not necessary to emit error msg if sdhci_add_host() fails. And
some other sdhci host drivers also have this issue, let's fix them
together.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add a new define for the sd default speed 25MHz case
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Move the calls to ->prepare_hs400_tuning(), from mmc_retune() into
mmc_hs400_to_hs200(), as it better belongs there, rather than being generic
to all type of cards.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
|
|
When there are 16 or more logical CPUs, we request for
`IWL_MAX_RX_HW_QUEUES` (16) IRQs only as we limit to that number of
IRQs, but later on we compare the number of IRQs returned to
nr_online_cpus+2 instead of max_irqs, the latter being what we
actually asked for. This ends up setting num_rx_queues to 17 which
causes lots of out-of-bounds array accesses later on.
Compare to max_irqs instead, and also add an assertion in case
num_rx_queues > IWM_MAX_RX_HW_QUEUES.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=199551
Fixes: 2e5d4a8f61dc ("iwlwifi: pcie: Add new configuration to enable MSIX")
Signed-off-by: Hao Wei Tee <angelsl@in04.sg>
Tested-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
This reverts commit fb47ada8dc3c30c8e7b415da155742b49536c61e.
In some situations when we set TXOP_BACKOFF, the probe frame is
not sent at all. What it worse then sending probe frame as part
of AMPDU and can degrade 11n performance to 11g rates.
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
working-branch-for-4.18
Signed-off-by: Benson Leung <bleung@chromium.org>
|
|
Without CONFIG_INPUT, or with a modular input layer and built-in
tablet driver, we get a link error:
ERROR: "input_event" [drivers/platform/chrome/chromeos_tbmc.ko] undefined!
ERROR: "input_register_device" [drivers/platform/chrome/chromeos_tbmc.ko] undefined!
ERROR: "input_set_capability" [drivers/platform/chrome/chromeos_tbmc.ko] undefined!
ERROR: "devm_input_allocate_device" [drivers/platform/chrome/chromeos_tbmc.ko] undefined!
This adds the corresponding Kconfig dependency
Fixes: b418f74170d7 ("platform: chrome: Add Tablet Switch ACPI driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benson Leung <bleung@chromium.org>
|
|
The netsec network controller IP can drive 64 address bits for DMA, and
the DMA mask is set accordingly in the driver. However, the SynQuacer
SoC, which is the only silicon incorporating this IP at the moment,
integrates this IP in a manner that leaves address bits [63:40]
unconnected.
Up until now, this has not resulted in any problems, given that the DDR
controller doesn't decode those bits to begin with. However, recent
firmware updates for platforms incorporating this SoC allow the IOMMU
to be enabled, which does decode address bits [47:40], and allocates
top down from the IOVA space, producing DMA addresses that have bits
set that have been left unconnected.
Both the DT and ACPI (IORT) descriptions of the platform take this into
account, and only describe a DMA address space of 40 bits (using either
dma-ranges DT properties, or DMA address limits in IORT named component
nodes). However, even though our IOMMU and bus layers may take such
limitations into account by setting a narrower DMA mask when creating
the platform device, the netsec probe() entrypoint follows the common
practice of setting the DMA mask uncondionally, according to the
capabilities of the IP block itself rather than to its integration into
the chip.
It is currently unclear what the correct fix is here. We could hack around
it by only setting the DMA mask if it deviates from its default value of
DMA_BIT_MASK(32). However, this makes it impossible for the bus layer to
use DMA_BIT_MASK(32) as the bus limit, and so it appears that a more
comprehensive approach is required to take DMA limits imposed by the
SoC as a whole into account.
In the mean time, let's limit the DMA mask to 40 bits. Given that there
is currently only one SoC that incorporates this IP, this is a reasonable
approach that can be backported to -stable and buys us some time to come
up with a proper fix going forward.
Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver")
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Jassi Brar <jaswinder.singh@linaro.org>
Cc: Masahisa Kojima <masahisa.kojima@linaro.org>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
seg6_do_srh_encap and seg6_do_srh_inline can possibly do an
out-of-bounds access when adding the SRH to the packet. This no longer
happen when expanding the skb not only by the size of the SRH (+
outer IPv6 header), but also by skb->mac_len.
[ 53.793056] BUG: KASAN: use-after-free in seg6_do_srh_encap+0x284/0x620
[ 53.794564] Write of size 14 at addr ffff88011975ecfa by task ping/674
[ 53.796665] CPU: 0 PID: 674 Comm: ping Not tainted 4.17.0-rc3-ARCH+ #90
[ 53.796670] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.11.0-20171110_100015-anatol 04/01/2014
[ 53.796673] Call Trace:
[ 53.796679] <IRQ>
[ 53.796689] dump_stack+0x71/0xab
[ 53.796700] print_address_description+0x6a/0x270
[ 53.796707] kasan_report+0x258/0x380
[ 53.796715] ? seg6_do_srh_encap+0x284/0x620
[ 53.796722] memmove+0x34/0x50
[ 53.796730] seg6_do_srh_encap+0x284/0x620
[ 53.796741] ? seg6_do_srh+0x29b/0x360
[ 53.796747] seg6_do_srh+0x29b/0x360
[ 53.796756] seg6_input+0x2e/0x2e0
[ 53.796765] lwtunnel_input+0x93/0xd0
[ 53.796774] ipv6_rcv+0x690/0x920
[ 53.796783] ? ip6_input+0x170/0x170
[ 53.796791] ? eth_gro_receive+0x2d0/0x2d0
[ 53.796800] ? ip6_input+0x170/0x170
[ 53.796809] __netif_receive_skb_core+0xcc0/0x13f0
[ 53.796820] ? netdev_info+0x110/0x110
[ 53.796827] ? napi_complete_done+0xb6/0x170
[ 53.796834] ? e1000_clean+0x6da/0xf70
[ 53.796845] ? process_backlog+0x129/0x2a0
[ 53.796853] process_backlog+0x129/0x2a0
[ 53.796862] net_rx_action+0x211/0x5c0
[ 53.796870] ? napi_complete_done+0x170/0x170
[ 53.796887] ? run_rebalance_domains+0x11f/0x150
[ 53.796891] __do_softirq+0x10e/0x39e
[ 53.796894] do_softirq_own_stack+0x2a/0x40
[ 53.796895] </IRQ>
[ 53.796898] do_softirq.part.16+0x54/0x60
[ 53.796900] __local_bh_enable_ip+0x5b/0x60
[ 53.796903] ip6_finish_output2+0x416/0x9f0
[ 53.796906] ? ip6_dst_lookup_flow+0x110/0x110
[ 53.796909] ? ip6_sk_dst_lookup_flow+0x390/0x390
[ 53.796911] ? __rcu_read_unlock+0x66/0x80
[ 53.796913] ? ip6_mtu+0x44/0xf0
[ 53.796916] ? ip6_output+0xfc/0x220
[ 53.796918] ip6_output+0xfc/0x220
[ 53.796921] ? ip6_finish_output+0x2b0/0x2b0
[ 53.796923] ? memcpy+0x34/0x50
[ 53.796926] ip6_send_skb+0x43/0xc0
[ 53.796929] rawv6_sendmsg+0x1216/0x1530
[ 53.796932] ? __orc_find+0x6b/0xc0
[ 53.796934] ? rawv6_rcv_skb+0x160/0x160
[ 53.796937] ? __rcu_read_unlock+0x66/0x80
[ 53.796939] ? __rcu_read_unlock+0x66/0x80
[ 53.796942] ? is_bpf_text_address+0x1e/0x30
[ 53.796944] ? kernel_text_address+0xec/0x100
[ 53.796946] ? __kernel_text_address+0xe/0x30
[ 53.796948] ? unwind_get_return_address+0x2f/0x50
[ 53.796950] ? __save_stack_trace+0x92/0x100
[ 53.796954] ? save_stack+0x89/0xb0
[ 53.796956] ? kasan_kmalloc+0xa0/0xd0
[ 53.796958] ? kmem_cache_alloc+0xd2/0x1f0
[ 53.796961] ? prepare_creds+0x23/0x160
[ 53.796963] ? __x64_sys_capset+0x252/0x3e0
[ 53.796966] ? do_syscall_64+0x69/0x160
[ 53.796968] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 53.796971] ? __alloc_pages_nodemask+0x170/0x380
[ 53.796973] ? __alloc_pages_slowpath+0x12c0/0x12c0
[ 53.796977] ? tty_vhangup+0x20/0x20
[ 53.796979] ? policy_nodemask+0x1a/0x90
[ 53.796982] ? __mod_node_page_state+0x8d/0xa0
[ 53.796986] ? __check_object_size+0xe7/0x240
[ 53.796989] ? __sys_sendto+0x229/0x290
[ 53.796991] ? rawv6_rcv_skb+0x160/0x160
[ 53.796993] __sys_sendto+0x229/0x290
[ 53.796996] ? __ia32_sys_getpeername+0x50/0x50
[ 53.796999] ? commit_creds+0x2de/0x520
[ 53.797002] ? security_capset+0x57/0x70
[ 53.797004] ? __x64_sys_capset+0x29f/0x3e0
[ 53.797007] ? __x64_sys_rt_sigsuspend+0xe0/0xe0
[ 53.797011] ? __do_page_fault+0x664/0x770
[ 53.797014] __x64_sys_sendto+0x74/0x90
[ 53.797017] do_syscall_64+0x69/0x160
[ 53.797019] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 53.797022] RIP: 0033:0x7f43b7a6714a
[ 53.797023] RSP: 002b:00007ffd891bd368 EFLAGS: 00000246 ORIG_RAX:
000000000000002c
[ 53.797026] RAX: ffffffffffffffda RBX: 00000000006129c0 RCX: 00007f43b7a6714a
[ 53.797028] RDX: 0000000000000040 RSI: 00000000006129c0 RDI: 0000000000000004
[ 53.797029] RBP: 00007ffd891be640 R08: 0000000000610940 R09: 000000000000001c
[ 53.797030] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
[ 53.797032] R13: 000000000060e6a0 R14: 0000000000008004 R15: 000000000040b661
[ 53.797171] Allocated by task 642:
[ 53.797460] kasan_kmalloc+0xa0/0xd0
[ 53.797463] kmem_cache_alloc+0xd2/0x1f0
[ 53.797465] getname_flags+0x40/0x210
[ 53.797467] user_path_at_empty+0x1d/0x40
[ 53.797469] do_faccessat+0x12a/0x320
[ 53.797471] do_syscall_64+0x69/0x160
[ 53.797473] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 53.797607] Freed by task 642:
[ 53.797869] __kasan_slab_free+0x130/0x180
[ 53.797871] kmem_cache_free+0xa8/0x230
[ 53.797872] filename_lookup+0x15b/0x230
[ 53.797874] do_faccessat+0x12a/0x320
[ 53.797876] do_syscall_64+0x69/0x160
[ 53.797878] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 53.798014] The buggy address belongs to the object at ffff88011975e600
which belongs to the cache names_cache of size 4096
[ 53.799043] The buggy address is located 1786 bytes inside of
4096-byte region [ffff88011975e600, ffff88011975f600)
[ 53.800013] The buggy address belongs to the page:
[ 53.800414] page:ffffea000465d600 count:1 mapcount:0
mapping:0000000000000000 index:0x0 compound_mapcount: 0
[ 53.801259] flags: 0x17fff0000008100(slab|head)
[ 53.801640] raw: 017fff0000008100 0000000000000000 0000000000000000
0000000100070007
[ 53.803147] raw: dead000000000100 dead000000000200 ffff88011b185a40
0000000000000000
[ 53.803787] page dumped because: kasan: bad access detected
[ 53.804384] Memory state around the buggy address:
[ 53.804788] ffff88011975eb80: fb fb fb fb fb fb fb fb fb fb fb fb
fb fb fb fb
[ 53.805384] ffff88011975ec00: fb fb fb fb fb fb fb fb fb fb fb fb
fb fb fb fb
[ 53.805979] >ffff88011975ec80: fb fb fb fb fb fb fb fb fb fb fb fb
fb fb fb fb
[ 53.806577] ^
[ 53.807165] ffff88011975ed00: fb fb fb fb fb fb fb fb fb fb fb fb
fb fb fb fb
[ 53.807762] ffff88011975ed80: fb fb fb fb fb fb fb fb fb fb fb fb
fb fb fb fb
[ 53.808356] ==================================================================
[ 53.808949] Disabling lock debugging due to kernel taint
Fixes: 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Signed-off-by: David Lebrun <dlebrun@google.com>
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for your net tree:
1) Null pointer dereference when dumping conntrack helper configuration,
from Taehee Yoo.
2) Missing sanitization in ebtables extension name through compat,
from Paolo Abeni.
3) Broken fetch of tracing value, from Taehee Yoo.
4) Incorrect arithmetics in packet ratelimiting.
5) Buffer overflow in IPVS sync daemon, from Julian Anastasov.
6) Wrong argument to nla_strlcpy() in nfnetlink_{acct,cthelper},
from Eric Dumazet.
7) Fix splat in nft_update_chain_stats().
8) Null pointer dereference from object netlink dump path, from
Taehee Yoo.
9) Missing static_branch_inc() when enabling counters in existing
chain, from Taehee Yoo.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since an SRP remote port is attached as a child to shost->shost_gendev
and as the only child, the translation from the shost pointer into an
rport pointer must happen by looking up the shost child that is an
rport. This patch fixes the following KASAN complaint:
BUG: KASAN: slab-out-of-bounds in srp_timed_out+0x57/0x110 [scsi_transport_srp]
Read of size 4 at addr ffff880035d3fcc0 by task kworker/1:0H/19
CPU: 1 PID: 19 Comm: kworker/1:0H Not tainted 4.16.0-rc3-dbg+ #1
Workqueue: kblockd blk_mq_timeout_work
Call Trace:
dump_stack+0x85/0xc7
print_address_description+0x65/0x270
kasan_report+0x231/0x350
srp_timed_out+0x57/0x110 [scsi_transport_srp]
scsi_times_out+0xc7/0x3f0 [scsi_mod]
blk_mq_terminate_expired+0xc2/0x140
bt_iter+0xbc/0xd0
blk_mq_queue_tag_busy_iter+0x1c7/0x350
blk_mq_timeout_work+0x325/0x3f0
process_one_work+0x441/0xa50
worker_thread+0x76/0x6c0
kthread+0x1b2/0x1d0
ret_from_fork+0x24/0x30
Fixes: e68ca75200fe ("scsi_transport_srp: Reduce failover time")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When a chain is updated, a counter can be attached. if so,
the nft_counters_enabled should be increased.
test commands:
%nft add table ip filter
%nft add chain ip filter input { type filter hook input priority 4\; }
%iptables-compat -Z input
%nft delete chain ip filter input
we can see below messages.
[ 286.443720] jump label: negative count!
[ 286.448278] WARNING: CPU: 0 PID: 1459 at kernel/jump_label.c:197 __static_key_slow_dec_cpuslocked+0x6f/0xf0
[ 286.449144] Modules linked in: nf_tables nfnetlink ip_tables x_tables
[ 286.449144] CPU: 0 PID: 1459 Comm: nft Tainted: G W 4.17.0-rc2+ #12
[ 286.449144] RIP: 0010:__static_key_slow_dec_cpuslocked+0x6f/0xf0
[ 286.449144] RSP: 0018:ffff88010e5176f0 EFLAGS: 00010286
[ 286.449144] RAX: 000000000000001b RBX: ffffffffc0179500 RCX: ffffffffb8a82522
[ 286.449144] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88011b7e5eac
[ 286.449144] RBP: 0000000000000000 R08: ffffed00236fce5c R09: ffffed00236fce5b
[ 286.449144] R10: ffffffffc0179503 R11: ffffed00236fce5c R12: 0000000000000000
[ 286.449144] R13: ffff88011a28e448 R14: ffff88011a28e470 R15: dffffc0000000000
[ 286.449144] FS: 00007f0384328700(0000) GS:ffff88011b600000(0000) knlGS:0000000000000000
[ 286.449144] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 286.449144] CR2: 00007f038394bf10 CR3: 0000000104a86000 CR4: 00000000001006f0
[ 286.449144] Call Trace:
[ 286.449144] static_key_slow_dec+0x6a/0x70
[ 286.449144] nf_tables_chain_destroy+0x19d/0x210 [nf_tables]
[ 286.449144] nf_tables_commit+0x1891/0x1c50 [nf_tables]
[ 286.449144] nfnetlink_rcv+0x1148/0x13d0 [nfnetlink]
[ ... ]
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The table field in nft_obj_filter is not an array. In order to check
tablename, we should check if the pointer is set.
Test commands:
%nft add table ip filter
%nft add counter ip filter ct1
%nft reset counters
Splat looks like:
[ 306.510504] kasan: CONFIG_KASAN_INLINE enabled
[ 306.516184] kasan: GPF could be caused by NULL-ptr deref or user memory access
[ 306.524775] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[ 306.528284] Modules linked in: nft_objref nft_counter nf_tables nfnetlink ip_tables x_tables
[ 306.528284] CPU: 0 PID: 1488 Comm: nft Not tainted 4.17.0-rc4+ #17
[ 306.528284] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015
[ 306.528284] RIP: 0010:nf_tables_dump_obj+0x52c/0xa70 [nf_tables]
[ 306.528284] RSP: 0018:ffff8800b6cb7520 EFLAGS: 00010246
[ 306.528284] RAX: 0000000000000000 RBX: ffff8800b6c49820 RCX: 0000000000000000
[ 306.528284] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffffed0016d96e9a
[ 306.528284] RBP: ffff8800b6cb75c0 R08: ffffed00236fce7c R09: ffffed00236fce7b
[ 306.528284] R10: ffffffff9f6241e8 R11: ffffed00236fce7c R12: ffff880111365108
[ 306.528284] R13: 0000000000000000 R14: ffff8800b6c49860 R15: ffff8800b6c49860
[ 306.528284] FS: 00007f838b007700(0000) GS:ffff88011b600000(0000) knlGS:0000000000000000
[ 306.528284] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 306.528284] CR2: 00007ffeafabcf78 CR3: 00000000b6cbe000 CR4: 00000000001006f0
[ 306.528284] Call Trace:
[ 306.528284] netlink_dump+0x470/0xa20
[ 306.528284] __netlink_dump_start+0x5ae/0x690
[ 306.528284] ? nf_tables_getobj+0x1b3/0x740 [nf_tables]
[ 306.528284] nf_tables_getobj+0x2f5/0x740 [nf_tables]
[ 306.528284] ? nft_obj_notify+0x100/0x100 [nf_tables]
[ 306.528284] ? nf_tables_getobj+0x740/0x740 [nf_tables]
[ 306.528284] ? nf_tables_dump_flowtable_done+0x70/0x70 [nf_tables]
[ 306.528284] ? nft_obj_notify+0x100/0x100 [nf_tables]
[ 306.528284] nfnetlink_rcv_msg+0x8ff/0x932 [nfnetlink]
[ 306.528284] ? nfnetlink_rcv_msg+0x216/0x932 [nfnetlink]
[ 306.528284] netlink_rcv_skb+0x1c9/0x2f0
[ 306.528284] ? nfnetlink_bind+0x1d0/0x1d0 [nfnetlink]
[ 306.528284] ? debug_check_no_locks_freed+0x270/0x270
[ 306.528284] ? netlink_ack+0x7a0/0x7a0
[ 306.528284] ? ns_capable_common+0x6e/0x110
[ ... ]
Fixes: e46abbcc05aa8 ("netfilter: nf_tables: Allow table names of up to 255 chars")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch fixes the following splat.
[118709.054937] BUG: using smp_processor_id() in preemptible [00000000] code: test/1571
[118709.054970] caller is nft_update_chain_stats.isra.4+0x53/0x97 [nf_tables]
[118709.054980] CPU: 2 PID: 1571 Comm: test Not tainted 4.17.0-rc6+ #335
[...]
[118709.054992] Call Trace:
[118709.055011] dump_stack+0x5f/0x86
[118709.055026] check_preemption_disabled+0xd4/0xe4
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The extra forward declaration of pm_qos_get_value() is redundant, so
drop it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Kernel library has a common function to match user input from sysfs
against an array of strings. Thus, replace bch_read_string_list() by
__sysfs_match_string().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is couple of functions that are used exclusively in sysfs.c.
Move it to there and make them static.
Besides above, it will allow further clean up.
No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is couple of string arrays that are used exclusively in sysfs.c.
Move it to there and make them static.
Besides above, it will allow further clean up.
No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently bcache does not handle backing device failure, if backing
device is offline and disconnected from system, its bcache device can still
be accessible. If the bcache device is in writeback mode, I/O requests even
can success if the requests hit on cache device. That is to say, when and
how bcache handles offline backing device is undefined.
This patch tries to handle backing device offline in a rather simple way,
- Add cached_dev->status_update_thread kernel thread to update backing
device status in every 1 second.
- Add cached_dev->offline_seconds to record how many seconds the backing
device is observed to be offline. If the backing device is offline for
BACKING_DEV_OFFLINE_TIMEOUT (30) seconds, set dc->io_disable to 1 and
call bcache_device_stop() to stop the bache device which linked to the
offline backing device.
Now if a backing device is offline for BACKING_DEV_OFFLINE_TIMEOUT seconds,
its bcache device will be removed, then user space application writing on
it will get error immediately, and handler the device failure in time.
This patch is quite simple, does not handle more complicated situations.
Once the bcache device is stopped, users need to recovery the backing
device, register and attach it manually.
Changelog:
v3: call wait_for_kthread_stop() before exits kernel thread.
v2: remove "bcache: " prefix when calling pr_warn().
v1: initial version.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Cc: Michael Lyle <mlyle@lyle.org>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
