summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-03-29net: fec: setup right value for mdio hold timeUwe Kleine-König1-3/+27
The FEC modules used on i.MX28 and newer have a register to tune the MDIO output hold time that should be at least 10 ns. Up to now this value was not explicitly set and so resulted in less hold time if the fec clock was faster than 100 MHz. This was noticed on an i.MX28 machine that uses an input clock of ~150 Mhz which resulted in unreliable communication with a Marvell switch. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29net: tcp6: fix double call of tcp_v6_fill_cb()Alexey Kodanev1-0/+11
tcp_v6_fill_cb() will be called twice if socket's state changes from TCP_TIME_WAIT to TCP_LISTEN. That can result in control buffer data corruption because in the second tcp_v6_fill_cb() call it's not copying IP6CB(skb) anymore, but 'seq', 'end_seq', etc., so we can get weird and unpredictable results. Performance loss of up to 1200% has been observed in LTP/vxlan03 test. This can be fixed by copying inet6_skb_parm to the beginning of 'cb' only if xfrm6_policy_check() and tcp_v6_fill_cb() are going to be called again. Fixes: 2dc49d1680b53 ("tcp6: don't move IP6CB before xfrm6_policy_check()") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29cxgb4vf: Fix sparse warningsHariprasad Shenai2-7/+11
Fixes sparse warnings introduced in commit e85c9a7abfa407ed ("cxgb4/cxgb4vf: Add code to calculate T5 BAR2 Offsets for SGE Queue Registers") and df64e4d38c904dd3 ("cxgb4/cxgb4vf: Use new interfaces to calculate BAR2 SGE Queue Register addresses") and few old ones sparse warnings: >> drivers/net/ethernet/chelsio/cxgb4vf/sge.c:1006:48: sparse: cast removes >> address space of expression >> drivers/net/ethernet/chelsio/cxgb4vf/sge.c:1006:48: sparse: incorrect type in >> initializer (different address space) >> drivers/net/ethernet/chelsio/cxgb4vf/sge.c:1020:40: sparse: incorrect type in >> argument 1 (different base types) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29netns: don't clear nsid too early on removalNicolas Dichtel1-9/+15
With the current code, ids are removed too early. Suppose you have an ipip interface that stands in the netns foo and its link part in the netns bar (so the netns bar has an nsid into the netns foo). Now, you remove the netns bar: - the bar nsid into the netns foo is removed - the netns exit method of ipip is called, thus our ipip iface is removed: => a netlink message is sent in the netns foo to advertise this deletion => this netlink message requests an nsid for bar, thus a new nsid is allocated for bar and never removed. We must remove nsids when we are sure that nobody will refer to netns currently cleaned. Fixes: 0c7aecd4bde4 ("netns: add rtnl cmd to add and get peer netns ids") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29Merge branch 'irqchip/urgent-gic' into irqchip/urgentJason Cooper2-9/+65
2015-03-29irqchip: gicv3-its: Use non-cacheable accesses when no shareabilityMarc Zyngier2-4/+47
If the ITS or the redistributors report their shareability as zero, then it is important to make sure they will no generate any cacheable traffic, as this is unlikely to produce the expected result. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1427465705-17126-5-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-03-29irqchip: gicv3-its: Fix PROP/PEND and BASE/CBASE confusionMarc Zyngier2-3/+16
The ITS driver sometime mixes up the use of GICR_PROPBASE bitfields for the GICR_PENDBASE register, and GITS_BASER for GICR_CBASE. This does not lead to any observable bug because similar bits are at the same location, but this just make the code even harder to understand... This patch provides the required #defines and fixes the mixup. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1427465705-17126-4-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-03-29irqchip: gicv3-its: Fix device ID encodingAndre Przywara1-1/+1
When building ITS commands which have the device ID in it, we should mask off the whole upper 32 bits of the first command word before inserting the new value in there. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1427465705-17126-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-03-29irqchip: gicv3-its: Fix encoding of collection's target redistributorMarc Zyngier1-1/+1
With a monolithic GICv3, redistributors are addressed using a linear number, while a distributed implementation uses physical addresses. When encoding a target address into a command, we strip the lower 16 bits, as redistributors are always 64kB aligned. This works perfectly well with a distributed implementation, but has the silly effect of always encoding target 0 in the monolithic case (unless you have more than 64k CPUs, of course). The obvious fix is to shift the linear target number by 16 when computing the target address, so that we don't loose any precious bit. Reported-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1427465705-17126-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-03-29Merge branch 'cxgb4'David S. Miller3-22/+101
Hariprasad Shenai says: ==================== cxgb4: Fixes ingress queue mapping and other fixes The below series fixes ingress queue mapping by allocating them dynamically to prevent stack overflow. Disable napi and interrupts before unregistering netdev to avoid crash while unloading driver when traffic is flowing. The patches series is created against 'net' tree. And includes patches on cxgb4 driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29cxgb4: Disable interrupts and napi before unregistering netdevHariprasad Shenai1-7/+18
Disable interrupts and quiesce rx before unregistering net device to avoid crash while unloading driver when traffic is flowing through. Based on original work by Shameem Khalid <shameem@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29cxgb4: Allocate dynamic mem. for egress and ingress queue mapsHariprasad Shenai3-15/+83
QIDs (egress/ingress) from firmware in FW_*_CMD.alloc command can be anywhere in the range from EQ(IQFLINT)_START to EQ(IQFLINT)_END. For eg, in the first load eqid can be from 100 to 300. In the next load it can be from 301 to 500 (assume eq_start is 100 and eq_end is 1000). The driver was assuming them to always start from EQ(IQFLINT)_START till MAX_EGRQ(INGQ). This was causing stack overflow and subsequent crash. Fixed it by dynamically allocating memory (of qsize (x_END - x_START + 1)) for these structures. Based on original work by Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29ipmr,ip6mr: call ip6mr_free_table() on failure pathWANG Cong2-2/+2
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29usbnet: Fix tx_bytes statistic running backward in cdc_ncmBen Hutchings5-11/+22
cdc_ncm disagrees with usbnet about how much framing overhead should be counted in the tx_bytes statistics, and tries 'fix' this by decrementing tx_bytes on the transmit path. But statistics must never be decremented except due to roll-over; this will thoroughly confuse user-space. Also, tx_bytes is only incremented by usbnet in the completion path. Fix this by requiring drivers that set FLAG_MULTI_FRAME to set a tx_bytes delta along with the tx_packets count. Fixes: beeecd42c3b4 ("net: cdc_ncm/cdc_mbim: adding NCM protocol statistics") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Bjørn Mork <bjorn@mork.no>
2015-03-29usbnet: Fix tx_packets stat for FLAG_MULTI_FRAME driversBen Hutchings5-3/+20
Currently the usbnet core does not update the tx_packets statistic for drivers with FLAG_MULTI_PACKET and there is no hook in the TX completion path where they could do this. cdc_ncm and dependent drivers are bumping tx_packets stat on the transmit path while asix and sr9800 aren't updating it at all. Add a packet count in struct skb_data so these drivers can fill it in, initialise it to 1 for other drivers, and add the packet count to the tx_packets statistic on completion. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-28Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-4/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Ingo Molnar: "Fix x86 syscall exit code bug that resulted in spurious non-execution of TIF-driven user-return worklets, causing big trouble for things like KVM that rely on user notifiers for correctness of their vcpu model, causing crashes like double faults" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm/entry: Check for syscall exit work with IRQs disabled
2015-03-28Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds3-9/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar: "Two clocksource driver fixes, and an idle loop RCU warning fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/sun5i: Fix cpufreq interaction with sched_clock() clocksource/drivers: Fix various !CONFIG_HAS_IOMEM build errors timers/tick/broadcast-hrtimer: Fix suspicious RCU usage in idle loop
2015-03-28Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Ingo Molnar: "A single sched/rt corner case fix for RLIMIT_RTIME correctness" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix RLIMIT_RTTIME when PI-boosting to RT
2015-03-28Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fix from Ingo Molnar: "A perf kernel side fix for a fuzzer triggered lockup" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix irq_work 'tail' recursion
2015-03-28Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds2-30/+59
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fix from Ingo Molnar: "A module unload lockdep race fix" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: lockdep: Fix the module unload key range freeing logic
2015-03-28Merge branch 'parisc-4.0-1' of ↵Linus Torvalds2-10/+16
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parsic fixes from Helge Deller: "One patch from Mikulas fixes a bug on parisc by artifically incrementing the counter in pmd_free when the kernel tries to free the preallocated pmd. Other than that we now prevent that syscalls gets added without incrementing __NR_Linux_syscalls and fix the initial pmd setup code if a default page size greater than 4k has been selected" * 'parisc-4.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix pmd code to depend on PT_NLEVELS value, not on CONFIG_64BIT parisc: mm: don't count preallocated pmds parisc: Add compile-time check when adding new syscalls
2015-03-28Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-4/+5
Pull kvm ppc bugfixes from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: Book3S HV: Fix instruction emulation KVM: PPC: Book3S HV: Endian fix for accessing VPA yield count KVM: PPC: Book3S HV: Fix spinlock/mutex ordering issue in kvmppc_set_lpcr()
2015-03-28Merge tag 'arc-4.0-fixes-part-2' of ↵Linus Torvalds1-6/+18
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: "We found some issues with signal handling taking down the system. I know its late, but these are important and all marked for stable. ARC signal handling related fixes uncovered during recent testing of NPTL tools" * tag 'arc-4.0-fixes-part-2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: signal handling robustify ARC: SA_SIGINFO ucontext regs off-by-one
2015-03-28Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull selinux bugfix from James Morris. Fix broken return value. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: selinux: fix sel_write_enforce broken return value
2015-03-28iio: imu: Use iio_trigger_get for indio_dev->trig assignmentDarshana Padmadas1-1/+1
This patch uses iio_trigger_get to increment the reference count of trigger device, to avoid incorrect assignment. Can result in a null pointer dereference during removal if the trigger has been changed before removal. This patch refers to a similar situation encountered through the following discussion: http://www.spinics.net/lists/linux-iio/msg13669.html Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-28iio: adc: vf610: use ADC clock within specificationStefan Agner1-30/+61
Depending on conversion mode used, the ADC clock (ADCK) needs to be below a maximum frequency. According to Vybrid's data sheet this is 20MHz for the low power conversion mode. The ADC clock is depending on input clock, which is the bus clock by default. Vybrid SoC are typically clocked at at 400MHz or 500MHz, which leads to 66MHz or 83MHz bus clock respectively. Hence, a divider of 8 is required to stay below the specified maximum clock of 20MHz. Due to the different bus clock speeds, the resulting sampling frequency is not static. Hence use the ADC clock and calculate the actual available sampling frequency dynamically. This fixes bogous values observed on some 500MHz clocked Vybrid SoC. The resulting value usually showed Bit 9 being stuck at 1, or 0, which lead to a value of +/-512. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Fugang Duan <B38611@freescale.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-28iio/adc/cc10001_adc.c: Fix !HAS_IOMEM buildRichard Weinberger1-1/+2
Fixes: drivers/built-in.o: In function `cc10001_adc_probe': cc10001_adc.c:(.text+0x412e92): undefined reference to `devm_ioremap_resource' Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-28drivers/of: Add empty ranges quirk for PA-SemiBenjamin Herrenschmidt1-3/+8
The "sdc" node is missing the ranges property, it needs to be treated as having an empty one otherwise translation fails for its children. Fixes 746c9e9f92dd, "of/base: Fix PowerPC address parsing hack" Tested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Stable <stable@vger.kernel.org> # v3.18+
2015-03-28ASoC: rsnd: call clk_prepare/unprepare() in probe/removeKuninori Morimoto5-10/+76
clk_prepare_enable()/clk_disable_unprepare() uses mutex inside, in concretely clk_prepare()/clk_unprepare().And it uses __schedule(). Then, raw_spin_lock/unlock_irq() is called, and it breaks Renesas sound driver's spin lock irq. This patch separates thesse into clk_prepare()/clk_unprepare() and clk_enable/clk_disable. And call clk_prepare()/clk_unprepare() from probe/remove function. Special thanks to Das Biju. Reported-by: Das Biju <biju.das@bp.renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-28Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds2-5/+5
Pull watchdog fixes from Wim Van Sebroeck: - mtk_wdt: signedness bug in mtk_wdt_start() - imgpdc: Fix NULL pointer dereference during probe and fix the default heartbeat * git://www.linux-watchdog.org/linux-watchdog: watchdog: imgpdc: Fix default heartbeat watchdog: imgpdc: Fix probe NULL pointer dereference watchdog: mtk_wdt: signedness bug in mtk_wdt_start()
2015-03-28Merge tag 'sound-4.0-rc6' of ↵Linus Torvalds2-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Three trivial oneliner fixes for HD-audio. Two are device-specific quirks while one is a generic fix for recent Realtek codecs" * tag 'sound-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Add one more node in the EAPD supporting candidate list ALSA: hda_intel: apply the Seperate stream_tag for Sunrise Point ALSA: hda - Add dock support for Thinkpad T450s (17aa:5036)
2015-03-27libata: Blacklist queued TRIM on Samsung SSD 850 ProMartin K. Petersen1-0/+2
Blacklist queued TRIM on this drive for now. Reported-by: Stefan Keller <linux-list@zahlenfresser.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> CC: stable@vger.kernel.org Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-27libata: Update Crucial/Micron blacklistMartin K. Petersen1-2/+11
Micron has released an updated firmware (MU02) for M510/M550/MX100 drives to fix the issues with queued TRIM. Queued TRIM remains broken on M500 but is working fine on later drives such as M600 and MX200. Tweak our blacklist to reflect the above. Link: https://bugzilla.kernel.org/show_bug.cgi?id=71371 Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-27ASoC: Intel: fix warning reported by static check tool smatchLu, Han1-8/+5
The smatch tool report warning: ... CHECK sound/soc/intel/sst-haswell-pcm.c sound/soc/intel/sst-haswell-pcm.c:1110 hsw_pcm_probe() error: buffer overflow\ 'hsw_dais' 4 <= 4 sound/soc/intel/sst-haswell-pcm.c:1112 hsw_pcm_probe() error: buffer overflow\ 'hsw_dais' 4 <= 4 ... fix it by use its own struct member for post-process module, rather than sharing unused pcm member. Signed-off-by: Lu, Han <han.lu@intel.com> Acked-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-27drm/radeon: programm the VCE fw BAR as wellChristian König2-0/+4
Otherwise the VCE firmware needs to be in the first 256MB of VRAM. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-27drm/radeon: always dump the ring content if it's availableChristian König1-1/+1
Dumping is still possible if a ring isn't ready, only when it isn't allocated at all we need to abort here. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-27radeon: Do not directly dereference pointers to BIOS area.David Miller1-3/+7
Use readb() and memcpy_fromio() accessors instead. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-03-27drm/radeon/dpm: fix 120hz handling harderAlex Deucher2-5/+18
Need to expand the check to handle short circuiting if the selected state is the same as current state. bug: https://bugs.freedesktop.org/show_bug.cgi?id=87796 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-03-27drm/edid: set ELD for firmware and debugfs override EDIDsJani Nikula2-0/+2
If the user supplies EDID through firmware or debugfs override, the driver callbacks are bypassed and the connector ELD does not get updated, and audio fails. Set ELD for firmware and debugfs EDIDs too. There should be no harm in gratuitously doing this for non HDMI/DP connectors, as it's still up to the driver to use the ELD, if any. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82349 Reference: https://bugs.freedesktop.org/show_bug.cgi?id=80691 Reported-by: Emil <emilsvennesson@gmail.com> Reported-by: Rob Engle <grenoble@gmail.com> Tested-by: Jolan Luff <jolan@gormsby.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-03-27locks: fix file_lock deletion inside loopYan, Zheng1-3/+2
locks_delete_lock_ctx() is called inside the loop, so we should use list_for_each_entry_safe. Fixes: 8634b51f6ca2 (locks: convert lease handling to file_lock_context) Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
2015-03-27firmware: dmi_scan: Prevent dmi_num integer overflowJean Delvare1-15/+7
dmi_num is a u16, dmi_len is a u32, so this construct: dmi_num = dmi_len / 4; would result in an integer overflow for a DMI table larger than 256 kB. I've never see such a large table so far, but SMBIOS 3.0 makes it possible so maybe we'll see such tables in the future. So instead of faking a structure count when the entry point does not provide it, adjust the loop condition in dmi_table() to properly deal with the case where dmi_num is not set. This bug was introduced with the initial SMBIOS 3.0 support in commit fc43026278b2 ("dmi: add support for SMBIOS 3.0 64-bit entry point"). Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Cc: <stable@vger.kernel.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2015-03-27gpio: syscon: reduce message level when direction reg offset not in dtGrygorii Strashko1-1/+1
Now GPIO syscon driver produces bunch of warnings during the boot of Kesytone 2 SoCs: gpio-syscon soc:keystone_dsp_gpio@02620240: can't read the dir register offset! gpio-syscon soc:keystone_dsp_gpio@2620244: can't read the dir register offset! This message unintentionally was added using dev_err(), but its actual log level is debug, because third cell of "ti,syscon-dev" is optional. Hence change it to dev_dbg() as it should be. This patch fixes commit: 5a3e3f8 ("gpio: syscon: retriave syscon node and regs offsets from dt") Reported-by: Russell King <linux@arm.linux.org.uk> Tested-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-27Merge branch 'upstream' of git://git.infradead.org/users/pcmoore/selinux ↵James Morris1-1/+1
into for-linus
2015-03-27watchdog: imgpdc: Fix default heartbeatJames Hogan1-3/+3
The IMG PDC watchdog driver heartbeat module parameter has no default so it is initialised to zero. This results in the following warning during probe: imgpdc-wdt 2006000.wdt: Initial timeout out of range! setting max timeout The module parameter description implies that the default value should be PDC_WDT_DEF_TIMEOUT, which isn't yet used, so initialise it to that. Also tweak the heartbeat module parameter description for consistency. Fixes: 93937669e9b5 ("watchdog: ImgTec PDC Watchdog Timer Driver") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: Naidu Tellapati <Naidu.Tellapati@imgtec.com> Cc: Jude Abraham <Jude.Abraham@imgtec.com> Cc: linux-watchdog@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-03-27watchdog: imgpdc: Fix probe NULL pointer dereferenceJames Hogan1-1/+1
The IMG PDC watchdog probe function calls pdc_wdt_stop() prior to watchdog_set_drvdata(), causing a NULL pointer dereference when pdc_wdt_stop() retrieves the struct pdc_wdt_dev pointer using watchdog_get_drvdata() and reads the register base address through it. Fix by moving the watchdog_set_drvdata() call earlier, to where various other pdc_wdt->wdt_dev fields are initialised. Fixes: 93937669e9b5 ("watchdog: ImgTec PDC Watchdog Timer Driver") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: Naidu Tellapati <Naidu.Tellapati@imgtec.com> Cc: Jude Abraham <Jude.Abraham@imgtec.com> Cc: linux-watchdog@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-03-27watchdog: mtk_wdt: signedness bug in mtk_wdt_start()Dan Carpenter1-1/+1
"ret" should be signed for the error handling to work correctly. This doesn't matter much in real life since mtk_wdt_set_timeout() always succeeds. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-03-27tty: serial: fsl_lpuart: clear receive flag on FIFO flushStefan Agner1-0/+3
When the receiver was enabled during startup, a character could have been in the FIFO when the UART get initially used. The driver configures the (receive) watermark level, and flushes the FIFO. However, the receive flag (RDRF) could still be set at that stage (as mentioned in the register description of UARTx_RWFIFO). This leads to an interrupt which won't be handled properly in interrupt mode: The receive interrupt function lpuart_rxint checks the FIFO count, which is 0 at that point (due to the flush during initialization). The problem does not manifest when using DMA to receive characters. Fix this situation by explicitly read the status register, which leads to clearing of the RDRF flag. Due to the flush just after the status flag read, a explicit data read is not to required. Signed-off-by: Stefan Agner <stefan@agner.ch> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-27tty: serial: fsl_lpuart: specify transmit FIFO sizeStefan Agner1-0/+2
Specify transmit FIFO size which might be different depending on LPUART instance. This makes sure uart_wait_until_sent in serial core getting called, which in turn waits and checks if the FIFO is really empty on shutdown by using the tx_empty callback. Without the call of this callback, the last several characters might not yet be transmitted when closing the serial port. This can be reproduced by simply using echo and redirect the output to a ttyLP device. Signed-off-by: Stefan Agner <stefan@agner.ch> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-27serial: samsung: Clear operation mode on UART shutdownJavier Martinez Canillas1-0/+1
Exynos serial ports operate either in a DMA-based or interrupt-based modes. In DMA-based mode, the UART generates a transfer data request and a Transmission (Tx) interrupt in interrupt-based mode. The Tx IRQ is only unmasked in interrupt-based mode and it was done in s3c24xx_serial_start_tx(). Commit ba019a3e2ad5 ("serial: samsung: remove redundant interrupt enabling") removed the IRQ enable on that function since it is enabled when the mode is set in enable_tx_pio(). The problem is that enable_tx_pio() is only called if the port mode has not been set before but the mode was not cleared on .shutdown(). So if the UART was shutdown and then started up again, the mode set will remain and the Tx IRQ won't be unmasked. This caused a hang on at least Exynos5250, Exynos5420 and Exynos5800 when the system is rebooted or powered off. Fixes: ba019a3e2ad5 ("serial: samsung: remove redundant interrupt enabling") Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-27Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds3-34/+35
Pull drm refcounting fixes from Dave Airlie: "Here is the complete set of i915 bug/warn/refcounting fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: Fixup legacy plane->crtc link for initial fb config drm/i915: Fix atomic state when reusing the firmware fb drm/i915: Keep ring->active_list and ring->requests_list consistent drm/i915: Don't try to reference the fb in get_initial_plane_config() drm: Fixup racy refcounting in plane_force_disable
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 09:05:37 +0300