summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-02-24net: ks8851-ml: Fix IRQ handling and lockingMarek Vasut1-6/+8
The KS8851 requires that packet RX and TX are mutually exclusive. Currently, the driver hopes to achieve this by disabling interrupt from the card by writing the card registers and by disabling the interrupt on the interrupt controller. This however is racy on SMP. Replace this approach by expanding the spinlock used around the ks_start_xmit() TX path to ks_irq() RX path to assure true mutual exclusion and remove the interrupt enabling/disabling, which is now not needed anymore. Furthermore, disable interrupts also in ks_net_stop(), which was missing before. Note that a massive improvement here would be to re-use the KS8851 driver approach, which is to move the TX path into a worker thread, interrupt handling to threaded interrupt, and synchronize everything with mutexes, but that would be a much bigger rework, for a separate patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24docs: networking: phy: Rephrase paragraph for clarityJonathan Neuschäfer1-2/+3
Let's make it a little easier to read. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24tc-testing: updated tdc tests for basic filter with u32 extended match rulesRoman Mashak1-0/+198
Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24tcp: fix TFO SYNACK undo to avoid double-timestamp-undoNeal Cardwell1-1/+5
In a rare corner case the new logic for undo of SYNACK RTO could result in triggering the warning in tcp_fastretrans_alert() that says: WARN_ON(tp->retrans_out != 0); The warning looked like: WARNING: CPU: 1 PID: 1 at net/ipv4/tcp_input.c:2818 tcp_ack+0x13e0/0x3270 The sequence that tickles this bug is: - Fast Open server receives TFO SYN with data, sends SYNACK - (client receives SYNACK and sends ACK, but ACK is lost) - server app sends some data packets - (N of the first data packets are lost) - server receives client ACK that has a TS ECR matching first SYNACK, and also SACKs suggesting the first N data packets were lost - server performs TS undo of SYNACK RTO, then immediately enters recovery - buggy behavior then performed a *second* undo that caused the connection to be in CA_Open with retrans_out != 0 Basically, the incoming ACK packet with SACK blocks causes us to first undo the cwnd reduction from the SYNACK RTO, but then immediately enters fast recovery, which then makes us eligible for undo again. And then tcp_rcv_synrecv_state_fastopen() accidentally performs an undo using a "mash-up" of state from two different loss recovery phases: it uses the timestamp info from the ACK of the original SYNACK, and the undo_marker from the fast recovery. This fix refines the logic to only invoke the tcp_try_undo_loss() inside tcp_rcv_synrecv_state_fastopen() if the connection is still in CA_Loss. If peer SACKs triggered fast recovery, then tcp_rcv_synrecv_state_fastopen() can't safely undo. Fixes: 794200d66273 ("tcp: undo cwnd on Fast Open spurious SYNACK retransmit") Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24r8169: improve rtl8169_start_xmitHeiner Kallweit1-13/+10
Only call rtl8169_xmit_frags() if the skb is actually fragmented. This avoid a small overhead for non-fragmented skb's, and it allows to simplify rtl8169_xmit_frags() a little. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24net: ena: ethtool: remove redundant non-zero check on rcColin Ian King1-4/+0
The non-zero check on rc is redundant as a previous non-zero check on rc will always return and the second check is never reached, hence it is redundant and can be removed. Also remove a blank line. Addresses-Coverity: ("Logically dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24tun: Remove unnecessary BUG_ON check in tun_net_xmitDavid Ahern1-2/+0
The BUG_ON for NULL tfile is now redundant due to a recently added null check after the rcu_dereference. Remove the BUG_ON. Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24hv_netvsc: Fix unwanted wakeup in netvsc_attach()Haiyang Zhang2-1/+4
When netvsc_attach() is called by operations like changing MTU, etc., an extra wakeup may happen while netvsc_attach() calling rndis_filter_device_add() which sends rndis messages when queue is stopped in netvsc_detach(). The completion message will wake up queue 0. We can reproduce the issue by changing MTU etc., then the wake_queue counter from "ethtool -S" will increase beyond stop_queue counter: stop_queue: 0 wake_queue: 1 The issue causes queue wake up, and counter increment, no other ill effects in current code. So we didn't see any network problem for now. To fix this, initialize tx_disable to true, and set it to false when the NIC is ready to be attached or registered. Fixes: 7b2ee50c0cd5 ("hv_netvsc: common detach logic") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24Linux 5.6-rc3v5.6-rc3Linus Torvalds1-1/+1
2020-02-24net: usb: qmi_wwan: restore mtu min/max values after raw_ip switchDaniele Palmas1-0/+3
usbnet creates network interfaces with min_mtu = 0 and max_mtu = ETH_MAX_MTU. These values are not modified by qmi_wwan when the network interface is created initially, allowing, for example, to set mtu greater than 1500. When a raw_ip switch is done (raw_ip set to 'Y', then set to 'N') the mtu values for the network interface are set through ether_setup, with min_mtu = ETH_MIN_MTU and max_mtu = ETH_DATA_LEN, not allowing anymore to set mtu greater than 1500 (error: mtu greater than device maximum). The patch restores the original min/max mtu values set by usbnet after a raw_ip switch. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24Merge branch 'mlxsw-Cosmetic-fixes'David S. Miller7-226/+174
Jiri Pirko says: ==================== mlxsw: Cosmetic fixes This is a set of mainly action/trap related cosmetic fixes. No functional changes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24mlxsw: pci: Remove unused valuesIdo Schimmel1-2/+0
Since commit f3a52c6162f8 ("mlxsw: pci: Utilize MRSR register to perform FW reset") the driver no longer issues a reset via the PCI BAR, so the offset of the reset bit is unused. Remove it. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24mlxsw: core: Remove priv from listener equality comparisonJiri Pirko2-25/+15
During packet receive, only the first matching RX listener in rx_listener_list is going to get the packet. So there is no meaning in registering two equal listeners with different privs. Remove priv from equality comparison and disable possibility of doing it. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24mlxsw: spectrum_acl: Make block arg const where appropriateJiri Pirko2-7/+10
There are couple of places where block pointer as a function argument can be const. So make those const. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24mlxsw: spectrum_trap: Make global arrays const as they should beJiri Pirko1-6/+6
The global arrays are treated as const, they should be const, so make them const. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24mlxsw: core: Remove initialization to false of mlxsw_listener structJiri Pirko1-2/+0
No need to initialize to false, so remove it. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24mlxsw: core: Convert is_event and is_ctrl bools to be single bitsJiri Pirko1-2/+2
No need for these two flags to be bool. Covert them to bits of u8. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24mlxsw: core: Remove dummy union name from struct mlxsw_listenerJiri Pirko2-7/+7
The dummy name for union is no longer needed, remove it. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24mlxsw: core: Remove unused action field from mlxsw_rx_listener structJiri Pirko1-1/+0
Commit 0791051c43ef ("mlxsw: core: Create a generic function to register / unregister traps") moved this field to struct mlxsw_listener, but forgot to remove it from struct mlxsw_rx_listener. Remove the unused field. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24mlxsw: spectrum_trap: Move policer initialization to mlxsw_sp_trap_init()Jiri Pirko1-53/+19
No need to initialize a single policer multiple times for each group. So move the initialization to be done from mlxsw_sp_trap_init(), making the function much simpler. Also, rename it so it is with sync with spectrum.c policers initialization. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24mlxsw: core_acl_flex_actions: Rename Trap / Discard Action to Trap ActionJiri Pirko1-54/+49
The Trap / Discard Action action got renamed in PRM, so rename it in the code as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24mlxsw: spectrum_trap: Move functions to avoid their forward declarationsJiri Pirko1-78/+73
No need to have forward declarations for mlxsw_sp_rx_drop_listener() and mlxsw_sp_rx_exception_listener(). Just move them up and avoid it. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24mlxsw: spectrum_trap: Use err variable instead of directly checking func ↵Jiri Pirko1-2/+6
return value When calling mlxsw_sp_rx_listener(), use err variable instead of directly checking func return value. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-23Merge tag 'for-5.6-rc2-tag' of ↵Linus Torvalds7-10/+44
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "These are fixes that were found during testing with help of error injection, plus some other stable material. There's a fixup to patch added to rc1 causing locking in wrong context warnings, tests found one more deadlock scenario. The patches are tagged for stable, two of them now in the queue but we'd like all three released at the same time. I'm not happy about fixes to fixes in such a fast succession during rcs, but I hope we found all the fallouts of commit 28553fa992cb ('Btrfs: fix race between shrinking truncate and fiemap')" * tag 'for-5.6-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix deadlock during fast fsync when logging prealloc extents beyond eof Btrfs: fix btrfs_wait_ordered_range() so that it waits for all ordered extents btrfs: fix bytes_may_use underflow in prealloc error condtition btrfs: handle logged extent failure properly btrfs: do not check delayed items are empty for single transaction cleanup btrfs: reset fs_root to NULL on error in open_ctree btrfs: destroy qgroup extent records on transaction abort
2020-02-23Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds10-108/+256
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "More miscellaneous ext4 bug fixes (all stable fodder)" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix mount failure with quota configured as module jbd2: fix ocfs2 corrupt when clearing block group bits ext4: fix race between writepages and enabling EXT4_EXTENTS_FL ext4: rename s_journal_flag_rwsem to s_writepages_rwsem ext4: fix potential race between s_flex_groups online resizing and access ext4: fix potential race between s_group_info online resizing and access ext4: fix potential race between online resizing and write operations ext4: add cond_resched() to __ext4_find_entry() ext4: fix a data race in EXT4_I(inode)->i_disksize
2020-02-23Merge tag 'csky-for-linus-5.6-rc3' of git://github.com/c-sky/csky-linuxLinus Torvalds34-164/+663
Pull csky updates from Guo Ren: "Sorry, I missed 5.6-rc1 merge window, but in this pull request the most are the fixes and the rests are between fixes and features. The only outside modification is the MAINTAINERS file update with our mailing list. - cache flush implementation fixes - ftrace modify panic fix - CONFIG_SMP boot problem fix - fix pt_regs saving for atomic.S - fix fixaddr_init without highmem. - fix stack protector support - fix fake Tightly-Coupled Memory code compile and use - fix some typos and coding convention" * tag 'csky-for-linus-5.6-rc3' of git://github.com/c-sky/csky-linux: (23 commits) csky: Replace <linux/clk-provider.h> by <linux/of_clk.h> csky: Implement copy_thread_tls csky: Add PCI support csky: Minimize defconfig to support buildroot config.fragment csky: Add setup_initrd check code csky: Cleanup old Kconfig options arch/csky: fix some Kconfig typos csky: Fixup compile warning for three unimplemented syscalls csky: Remove unused cache implementation csky: Fixup ftrace modify panic csky: Add flush_icache_mm to defer flush icache all csky: Optimize abiv2 copy_to_user_page with VM_EXEC csky: Enable defer flush_dcache_page for abiv2 cpus (807/810/860) csky: Remove unnecessary flush_icache_* implementation csky: Support icache flush without specific instructions csky/Kconfig: Add Kconfig.platforms to support some drivers csky/smp: Fixup boot failed when CONFIG_SMP csky: Set regs->usp to kernel sp, when the exception is from kernel csky/mm: Fixup export invalid_pte_table symbol csky: Separate fixaddr_init from highmem ...
2020-02-23KVM: nVMX: Check IO instruction VM-exit conditionsOliver Upton2-7/+52
Consult the 'unconditional IO exiting' and 'use IO bitmaps' VM-execution controls when checking instruction interception. If the 'use IO bitmaps' VM-execution control is 1, check the instruction access against the IO bitmaps to determine if the instruction causes a VM-exit. Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-23KVM: nVMX: Refactor IO bitmap checks into helper functionOliver Upton2-14/+27
Checks against the IO bitmap are useful for both instruction emulation and VM-exit reflection. Refactor the IO bitmap checks into a helper function. Signed-off-by: Oliver Upton <oupton@google.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-23KVM: nVMX: Don't emulate instructions in guest modePaolo Bonzini1-1/+1
vmx_check_intercept is not yet fully implemented. To avoid emulating instructions disallowed by the L1 hypervisor, refuse to emulate instructions by default. Cc: stable@vger.kernel.org [Made commit, added commit msg - Oliver] Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-23KVM: nVMX: Emulate MTF when performing instruction emulationOliver Upton8-2/+83
Since commit 5f3d45e7f282 ("kvm/x86: add support for MONITOR_TRAP_FLAG"), KVM has allowed an L1 guest to use the monitor trap flag processor-based execution control for its L2 guest. KVM simply forwards any MTF VM-exits to the L1 guest, which works for normal instruction execution. However, when KVM needs to emulate an instruction on the behalf of an L2 guest, the monitor trap flag is not emulated. Add the necessary logic to kvm_skip_emulated_instruction() to synthesize an MTF VM-exit to L1 upon instruction emulation for L2. Fixes: 5f3d45e7f282 ("kvm/x86: add support for MONITOR_TRAP_FLAG") Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-23KVM: fix error handling in svm_hardware_setupLi RongQing1-21/+20
rename svm_hardware_unsetup as svm_hardware_teardown, move it before svm_hardware_setup, and call it to free all memory if fail to setup in svm_hardware_setup, otherwise memory will be leaked remove __exit attribute for it since it is called in __init function Signed-off-by: Li RongQing <lirongqing@baidu.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-23net: genetlink: return the error code when attribute parsing fails.Paolo Abeni1-2/+3
Currently if attribute parsing fails and the genl family does not support parallel operation, the error code returned by __nlmsg_parse() is discarded by genl_family_rcv_msg_attrs_parse(). Be sure to report the error for all genl families. Fixes: c10e6cf85e7d ("net: genetlink: push attrbuf allocation and parsing to a separate function") Fixes: ab5b526da048 ("net: genetlink: always allocate separate attrs for dumpit ops") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-23r8169: remove RTL_EVENT_NAPI constantsHeiner Kallweit1-5/+1
These constants are used in one place only, so we can remove them and use the values directly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-23ipv4: ensure rcu_read_lock() in cipso_v4_error()Matteo Croce1-1/+6
Similarly to commit c543cb4a5f07 ("ipv4: ensure rcu_read_lock() in ipv4_link_failure()"), __ip_options_compile() must be called under rcu protection. Fixes: 3da1ed7ac398 ("net: avoid use IPCB in cipso_v4_error") Suggested-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Matteo Croce <mcroce@redhat.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-23vhost: Check docket sk_family instead of call getnameEugenio Pérez1-9/+1
Doing so, we save one call to get data we already have in the struct. Also, since there is no guarantee that getname use sockaddr_ll parameter beyond its size, we add a little bit of security here. It should do not do beyond MAX_ADDR_LEN, but syzbot found that ax25_getname writes more (72 bytes, the size of full_sockaddr_ax25, versus 20 + 32 bytes of sockaddr_ll + MAX_ADDR_LEN in syzbot repro). Fixes: 3a4d5c94e9593 ("vhost_net: a kernel-level virtio server") Reported-by: syzbot+f2a62d07a5198c819c7b@syzkaller.appspotmail.com Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-23Merge branch 'mlxsw-Remove-RTNL-from-route-insertion-path'David S. Miller6-156/+267
Ido Schimmel says: ==================== mlxsw: Remove RTNL from route insertion path This patch set removes RTNL from the route insertion path in mlxsw in order to reduce the control plane latency: the time it takes to push routes from user space to the kernel and mlxsw. Up until now mlxsw did not have a lock to protect its shared router data structures and instead relied on RTNL. While this was simple and worked, it resulted in large control plane latencies as RTNL was heavily contended - by both the task receiving the netlink messages from user space and the mlxsw workqueue that programs the routes to the device. By removing RTNL and introducing a new router mutex, this patch set reduces the control plane latency by ~80%. A single mutex is added as inside mlxsw there is not a lot of concurrency. In addition, a more fine-grained locking scheme is much more error-prone. Patches #1-#6 are preparations. They add needed locking in NVE and multicast routing code instead of relying on RTNL Patch #7 introduces the new mutex Patches #8-#12 gradually take the lock in various entry points into the routing code Patch #13 removes RTNL in places where it is no longer required ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-23mlxsw: spectrum: Remove RTNL where possibleIdo Schimmel2-29/+0
After introducing the router lock in previous patches and making sure it protects internal router structures, we no longer need to rely on RTNL to serialize access to these structures. Remove RTNL from call sites that no longer require it. Two calls sites that keep taking the lock are mlxsw_sp_router_fibmr_event_work() and mlxsw_sp_inet6addr_event_work(). The first calls into ACL code that still assumes RTNL is taken. The second potentially calls into the FID code that also relies on RTNL. Removing RTNL from these two call sites is the subject of future work. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-23mlxsw: spectrum_router: Take router lock from exported helpersIdo Schimmel1-22/+58
The routing code exports some helper functions that can be called from other driver modules such as the bridge. These helpers are never called with the router lock already held and therefore need to take it in order to serialize access to shared router structures. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-23mlxsw: spectrum_router: Take router lock from inetaddr listenersIdo Schimmel1-3/+9
Another entry point into the routing code is from inetaddr listeners. The driver registers listeners to IPv4 and IPv6 inetaddr notification chains in order to understand when a RIF needs to be created or destroyed. Serialize access to shared router structures from these listeners by taking the router lock when processing inetaddr events. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-23mlxsw: spectrum_router: Take router lock from netdev listenerIdo Schimmel2-23/+45
One entry point into the routing code is from the netdev listener block. Some netdev events require access to internal router structures. For example, changing the MTU of a netdev requires looking-up the backing RIF and adjusting its MTU. In order to serialize access to shared router structures, take the router lock when processing netdev events that require access to it. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-23mlxsw: spectrum_dpipe: Take router lock from dpipe codeIdo Schimmel1-0/+18
The dpipe code traverses internal router structures such as neighbours and adjacency entries and dumps them to user space via netlink. Up until now the routing code did not have its own locks and relied on RTNL lock to serialize access. This is going to change with the introduction of the router lock. Take the router lock in the code paths where RTNL lock is currently taken so that the latter could be removed by subsequent patches. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-23mlxsw: spectrum_router: Take router lock from inside routing codeIdo Schimmel1-7/+17
There are several work items in the routing code that currently rely on RTNL lock to guard against concurrent changes. Have these work items acquire the router lock in preparation for the removal for RTNL lock from the routing code. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-23mlxsw: spectrum_router: Introduce router lockIdo Schimmel2-0/+5
Introduce a mutex to protect the internal structure of the routing code. A single lock is added instead of a more fine-grained and complicated locking scheme because there is not a lot of concurrency in the routing code. The main motivation is remove the dependence on RTNL lock, which is currently used by both the process pushing routes to the kernel and the workqueue pushing the routes to the underlying device. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-23mlxsw: spectrum_router: Store NVE decapsulation configuration in routerIdo Schimmel4-29/+46
When a host route is added, the driver checks if the route needs to be promoted to perform NVE decapsulation based on the current NVE configuration. If so, the index of the decapsulation entry is retrieved and associated with the route. Currently, this information is stored in the NVE module which the router module consults. Since the information is protected under RTNL and since route insertion happens with RTNL held, there is no problem to retrieve the information from the NVE module. However, this is going to change and route insertion will no longer happen under RTNL. Instead, a dedicated lock will be introduced for the router module. Therefore, store this information in the router module and change the router module to consult this copy. The validity of the information is set / cleared whenever an NVE tunnel is initialized / de-initialized. When this happens the NVE module calls into the router module to promote / demote the relevant host route. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-23mlxsw: spectrum_router: Expose router struct to internal usersIdo Schimmel2-33/+33
The dpipe code accesses internal router data structures and acquires RTNL to protect against their changes. Subsequent patches will remove reliance on RTNL and introduce a dedicated lock to protect router data structures. Publish the router struct to internal users such as the dpipe, so that they could acquire it instead of RTNL. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-23mlxsw: spectrum_mr: Protect multicast route list with a lockIdo Schimmel1-4/+20
Protect the per-table multicast route list with a lock and remove RTNL from the delayed work that periodically updates the kernel about packets and bytes statistics from each multicast route. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-23mlxsw: spectrum_mr: Protect multicast table list with a lockIdo Schimmel1-0/+11
The multicast table list is traversed from a delayed work that periodically updates the kernel about packets and bytes statistics from each multicast route. The list is currently protected by RTNL, but subsequent patches will remove the driver's dependence on this contended lock. In order to be able to remove dependence on RTNL in the next patch, guard this list with a dedicated mutex. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-23mlxsw: spectrum_mr: Publish multicast route after writing it to the deviceIdo Schimmel1-9/+8
The driver periodically traverses the linked list of multicast routes and updates the kernel about packets and bytes statistics from each multicast route. These statistics are read from a counter associated with the route when it is written to the device. Currently, multicast routes are published via this linked list before they are associated with a counter. Despite that, it is not possible for the driver to access an invalid counter because the delayed work that reads the statistics and multicast route addition / deletion are mutually exclusive using RTNL. In order to be able to remove RTNL, the list needs to be protected by a dedicated lock, but any route published via the list must have an associated counter, otherwise the driver will access an invalid counter. Solve this by re-ordering the operations during multicast route addition so that the route is only added to the linked list after it was written to the device. Similarly, during deletion the route is first removed from the linked list before its deletion from the device. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-23csky: Replace <linux/clk-provider.h> by <linux/of_clk.h>Geert Uytterhoeven1-1/+1
The C-Sky platform code is not a clock provider, and just needs to call of_clk_init(). Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-23Merge tag 'ras-urgent-2020-02-22' of ↵Linus Torvalds1-23/+27
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS fixes from Thomas Gleixner: "Two fixes for the AMD MCE driver: - Populate the per CPU MCA bank descriptor pointer only after it has been completely set up to prevent a use-after-free in case that one of the subsequent initialization step fails - Implement a proper release function for the sysfs entries of MCA threshold controls instead of freeing the memory right in the CPU teardown code, which leads to another use-after-free when the associated sysfs file is opened and accessed" * tag 'ras-urgent-2020-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce/amd: Fix kobject lifetime x86/mce/amd: Publish the bank pointer only after setup has succeeded
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 07:03:41 +0300