| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Fix cleanup paths in wcd9335 and wcd937x codec drivers.
|
|
The controls between the tas5717 and tas5733 should not be shared since
the biquad and register setup is not identical. For example, writing to
0x5c on the tas5717 modifies ch2_bq[10] while on the tas5733 this is
ch1_cross_bq[3].
see https://www.ti.com/lit/ds/symlink/tas5733l.pdf and
https://www.ti.com/lit/ds/symlink/tas5717.pdf for more details on the
register maps.
Signed-off-by: Bram Vlerick <bram.vlerick@openpixelsystems.org>
Link: https://patch.msgid.link/20250527-tas5733-biquad-fix-v1-1-0d3d941700bb@openpixelsystems.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
get_coeff() returns –EINVAL when no table entry matches.
The driver then uses that value as an index into coeff_div[],
causing an OOB access.
To fix lets abort the hw_params call instead.
Fixes: de2b3119f9f7 ("ASoC: codecs: add support for ES8375")
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Link: https://patch.msgid.link/20250526191820.72577-1-qasdev00@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver gets regulator supplies in probe path with
devm_regulator_bulk_get(), so should not call regulator_bulk_free() in
error and remove paths to avoid double free.
Fixes: 216d04139a6d ("ASoC: codecs: wcd937x: Remove separate handling for vdd-buck supply")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250526-b4-b4-asoc-wcd9395-vdd-px-fixes-v1-3-0b8a2993b7d3@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Last user of wcd937x_priv->buck_supply was removed in
commit 216d04139a6d ("ASoC: codecs: wcd937x: Remove separate handling
for vdd-buck supply").
Fixes: 216d04139a6d ("ASoC: codecs: wcd937x: Remove separate handling for vdd-buck supply")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250526-b4-b4-asoc-wcd9395-vdd-px-fixes-v1-2-0b8a2993b7d3@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver gets and enables all regulator supplies in probe path
(wcd9335_parse_dt() and wcd9335_power_on_reset()), but does not cleanup
in final error paths and in unbind (missing remove() callback). This
leads to leaked memory and unbalanced regulator enable count during
probe errors or unbind.
Fix this by converting entire code into devm_regulator_bulk_get_enable()
which also greatly simplifies the code.
Fixes: 20aedafdf492 ("ASoC: wcd9335: add support to wcd9335 codec")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250526-b4-b4-asoc-wcd9395-vdd-px-fixes-v1-1-0b8a2993b7d3@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
KASAN reported out of bounds access - cs_dsp_ctl_cache_init_multiple_offsets().
The code uses mock_coeff_template.length_bytes (4 bytes) for register value
allocations. But later, this length is set to 8 bytes which causes
test code failures.
As fix, just remove the lenght override, keeping the original value 4
for all operations.
Cc: Simon Trimmer <simont@opensource.cirrus.com>
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: Richard Fitzgerald <rf@opensource.cirrus.com>
Cc: patches@opensource.cirrus.com
Cc: stable@vger.kernel.org
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250523154151.1252585-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
KASAN reported out of bounds access - cs_dsp_mock_wmfw_add_info(),
because the source string length was rounded up to the allocation size.
Cc: Simon Trimmer <simont@opensource.cirrus.com>
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: Richard Fitzgerald <rf@opensource.cirrus.com>
Cc: patches@opensource.cirrus.com
Cc: stable@vger.kernel.org
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250523155814.1256762-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Zhang Yi <zhangyi@everest-semi.com>:
The driver is for codec ES8375 of everest-semi.
|
|
KASAN reported out of bounds access - cs_dsp_mock_bin_add_name_or_info(),
because the source string length was rounded up to the allocation size.
Cc: Simon Trimmer <simont@opensource.cirrus.com>
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: Richard Fitzgerald <rf@opensource.cirrus.com>
Cc: patches@opensource.cirrus.com
Cc: stable@vger.kernel.org
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20250523102102.1177151-1-perex@perex.cz
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver is for codec es8375 of everest
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20250523025502.23214-3-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add device tree binding documentation for Everest ES8375
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20250523025502.23214-2-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from "Sheetal ." <sheetal@nvidia.com>:
The patch series includes the necessary changes to enable
support for the Tegra264 platforms in AHUB drivers.
|
|
The cirrus_dir pointer should be const data but was missing the second
const needed to achieve this.
I haven't marked this as a 'Fixes' because it isn't causing any bugs,
it's only a code improvement.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250522103816.543919-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Tegra264 supports max 32 channels, hence calculating the max
bandwidth using the channel info from soc_data.
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20250512051747.1026770-12-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add Tegra264 AHUB support with following changes:
- Update Tegra264 IP instances: DMIC(2), DSPK(1), AMX(6), ADX(6), I2S(8).
- Update register offsets for Tegra264.
- Add soc_data for Tegra264 chip-specific variations.
- Increase channels_max to 32 for Tegra264 DAIs.
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20250512051747.1026770-11-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add Tegra264 ADX support with following changes:
- Add soc_data for Tegra264-specific variations
- Tegra264 ADX supports 32 input channels, hence update the playback DAI
channels_max parameter and CIF configuration API.
- Register offsets and default values are updated to align with Tegra264.
- Add 128 byte map controls for Tegra264 to accommodate each byte per
channel (32channels x 32bits).
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20250512051747.1026770-10-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add Tegra264 AMX support with following changes:
- Add soc_data for Tegra264-specific variations
- Tegra264 AMX supports 32 output channels, hence update the capture DAI
channels_max parameter and CIF configuration API.
- Register offsets and default values are updated to align with Tegra264.
- Add 128 byte map controls for Tegra264 to accommodate each byte per
channel (32channels x 32bits).
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20250512051747.1026770-9-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add Tegra264 I2S support with following changes:
- Add soc_data for Tegra264-specific variations
- Tegra264 I2S supports 32 audio channels, hence update the TDM config,
CIF configuration API and DAI channel_max parameter.
- Register offsets and default values are updated to align with Tegra264.
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20250512051747.1026770-8-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The PLLs should be set with a VCO frequency in the 900MHz – 1GHz range
to minimize jitter and ppm error for Tegra264. Add the PLLA rate
accordingly.
Therefore, use 983040000 frequency is for multiple of 8K frequencies
and 993484800 frequency is for multiple of 11.025K frequencies.
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20250512051747.1026770-7-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The ARAM address for Tegra264 has been updated. To maintain backward
compatibility given its chip-specific nature, it's now included in the
soc_data.
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20250512051747.1026770-6-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add Tegra264 I2S support with following changes:
- Add soc_data for Tegra264-specific variations
- Tegra264 supports 32 RX and 32 TX ADMAIF channels and each ADMAIF
stream supports max 32 channels. To accommodate the change dais, CIF
configuration API and driver components are updated.
- Register offsets and default values are updated to align with Tegra264.
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20250512051747.1026770-5-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In Tegra264, the CIF register data bit positions are changed for I2S,
AMX, ADX and ADMAIF AHUB modules, as they now support a maximum of
32 channels. tegra264_set_cif API added to set the CIF for IPs supporting
32 channels.
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20250512051747.1026770-4-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add Tegra264 compatible strings to APE subsystem device bindings:
- audio-graph-card: Due to different PLL clock rate.
- admaif: Due to 32 channels supported and register offset changes.
- i2s: Due to 32 channels supported and register offset changes.
- amx/adx: Due to 32 channels supported and register offset changes.
- asrc: Due to different ARAM address.
- ahub: Due to AHUB IPs number of instances updates.
- for future proofing the T264 compatibility is added for other device
nodes.
These bindings enable the enhanced audio features of Tegra264
while maintaining compatibility with existing platforms.
Signed-off-by: Sheetal <sheetal@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250512051747.1026770-3-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add optional interconnect and iommu properties to admaif yaml. These
properties are supported from Tegra186 SoC onwards.
This fixes below dtbs_check error for Tegra194 and Tegra234:
'interconnect-names', 'interconnects', 'iommus' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Sheetal <sheetal@nvidia.com>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://patch.msgid.link/20250512051747.1026770-2-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
audio-graph.yaml already has "routing" property, let's reference it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/875xi4axln.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Add helper functions to add DAPM widgets, routes, ALSA controls,
and DAI drivers, these will be used to create SDCA function device
drivers.
This series should provide most of the core functionality needed to
get a device registered and have a working DAPM graph within the
device. There are some features that still need additional work, these
are marked with FIXMEs in the code. The two main things are SDCA
Clock Muxes (not used in our devices and needs some ASoC core work),
and better support for more complex SDCA volume control definitions
(our parts have fairly simple volumes, and SDCA has a large amount of
flexibility in how the volume control is specified).
The next steps in the process are to add helpers for the DAI ops
themselves, some IRQ handling, and firmware download. And finally we
should be able to actually add the SDCA class driver itself.
|
|
Merge series from Stefan Binding <sbinding@opensource.cirrus.com>:
This adds support to the Intel machine drivers for CS35L63 codecs using
soundwire, and also adds match entries for the CDB35L63-CB2 on MTL
systems.
|
|
The yaml has "hp-det-gpios" property, but Audio-Graph-Card2 can handle
"mic-det-gpios" too. Add it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/877c2kaxn4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add an entry in the soundwire quirk table for Wildcat boards to support
WCL RVP
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250521034840.8083-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This adds a match entry for using all the amps on a CDB35L63-CB2 board
without the CS42L43 codec. Configuration is:
SDW3: 1x CS35L63 (OUT1)
SDW1: 1x CS35L63 (OUT2)
Speaker playback and amp feedback are aggregated.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20250516152107.210994-3-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
CS35L63 is very similar to CS35L56, and uses the same driver, so we
can use the same configuration.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20250516152107.210994-2-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the previously parsed DisCo information from ACPI to create the DAI
drivers required to connect an SDCA Function into an ASoC soundcard.
Create DAI driver structures and populate the supported sample rates
and sample widths into them based on the Input/Output Terminal and any
attach Clock Source entities. More complex relationships with channels
etc. will be added later as constraints as part of the DAI startup.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the previously parsed DisCo information from ACPI to create the
ALSA controls required by an SDCA Function. This maps all User and
Application level SDCA Controls to ALSA controls. Typically controls
marked with those access levels are just volumes and mutes.
SDCA defines volume controls as an integer in 1/256ths of a dB and
then provides a mechanism to specify what values are valid (range
templates). Currently only a simple case of a single linear volume
range with a power of 2 step size is supported. This allows the code
to expose the volume control using a simple shift. This will need
expanded in the future, to support more complex ranges and probably
also some additional control types but this should be sufficient to
for a first pass.
For non-dataport terminal widgets also add a pin switch to allow
that endpoint to be turned on/off.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the previously parsed DisCo information from ACPI to create DAPM
widgets and routes representing a SDCA Function. For the most part SDCA
maps well to the DAPM abstractions.
The primary point of interest is the SDCA Power Domain Entities
(PDEs), which actually control the power status of the device. Whilst
these PDEs are the primary widgets the other parts of the SDCA graph
are added to maintain a consistency with the hardware abstract,
and allow routing to take effect. As for the PDEs themselves the
code currently only handle PS0 and PS3 (basically on and off),
the two intermediate power states are not commonly used and don't
map well to ASoC/DAPM.
Other minor points of slightly complexity include, the Group Entities
(GEs) these set the value of several other controls, typically
Selector Units (SUs) for enabling a cetain jack configuration. Multiple
SUs being controlled by a GE are easily modelled creating a single
control and sharing it among the controlled muxes.
SDCA also has a slight habit of having fully connected paths, relying
more on activating the PDEs to enable functionality. This doesn't
map quite so perfectly to DAPM which considers the path a reason to
power the PDE. Whilst in the current specification Mixer Units are
defined as fixed-function, in DAPM we create a virtual control for
each input (which defaults to connected). This allows paths to be
connected/disconnected, providing a more ASoC style approach to
managing the power. PIN_SWITCHs will also be added for non-dataport
terminal entities in a later patch along with the other ALSA controls,
providing greater flexibility in power management.
A top level helper sdca_asoc_populate_component() is exported that
counts and allocates everything, however, the intermediate counting and
population functions are also exported. This will allow end drivers to
do allocation and add custom handling, which is probably fairly likely
for the early SDCA devices.
Clock muxes are currently not fully supported, so some future work will
also be required there.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The core currently supports pin switches for source/sink widgets, but
only at the card level. SDCA components specify the fabric at the
level of the individual components, to support this add helpers to
allow component level pin switches.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move the allocation of the PDE delays array until after the size has
been adjusted, this saves an additional division and simplifies the
code slightly.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no need to include MODULE_LICENSE() and MODULE_DESCRIPTION() in
sdca_regmap.c as this file is part of a larger module that already
defines these.
Fixes: e3f7caf74b79 ("ASoC: SDCA: Add generic regmap SDCA helpers")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix minor typo SDAC -> SDCA.
Fixes: 42b144cb6a2d ("ASoC: SDCA: Add SDCA Control parsing")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>:
This patchset adds support for sound card on Qualcomm QCS9100 and
QCS9075 boards.
|
|
Add compatibles for sound card on Qualcomm QCS9100 and
QCS9075 boards.
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250519083244.4070689-3-mohammad.rafi.shaik@oss.qualcomm.com
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document the bindings for the Qualcomm QCS9100 and QCS9075 board
specific sound card.
The bindings are the same as for other newer Qualcomm ADSP sound cards,
thus keep them in existing qcom,sm8250.yaml file, even though Linux driver
is separate.
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Link: https://patch.msgid.link/20250519083244.4070689-2-mohammad.rafi.shaik@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Drop the I2C in one comment, for these registers are also used in SPI
driver; Move the macro definition of TASDEVICE_CMD_XXX from tas2781.h to
tas2781_fmwlib.c, because the macros are only referenced in only fwlib.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250518132451.707-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch makes sure the access to the codecs is cached until the device is enumerated.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20250519090645.2620292-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"This has a bunch of idxd driver fixes, dmatest revert and bunch of
smaller driver fixes:
- a bunch of idxd potential mem leak fixes
- dmatest revert for waiting for interrupt fix as that causes issue
- a couple of ti k3 udma fixes for locking and cap_mask
- mediatek deadlock fix and unused variable cleanup fix"
* tag 'dmaengine-fix-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: mediatek: drop unused variable
dmaengine: fsl-edma: Fix return code for unhandled interrupts
dmaengine: mediatek: Fix a possible deadlock error in mtk_cqdma_tx_status()
dmaengine: idxd: Fix ->poll() return value
dmaengine: idxd: Refactor remove call with idxd_cleanup() helper
dmaengine: idxd: Add missing idxd cleanup to fix memory leak in remove call
dmaengine: idxd: fix memory leak in error handling path of idxd_pci_probe
dmaengine: idxd: fix memory leak in error handling path of idxd_alloc
dmaengine: idxd: Add missing cleanups in cleanup internals
dmaengine: idxd: Add missing cleanup for early error out in idxd_setup_internals
dmaengine: idxd: fix memory leak in error handling path of idxd_setup_groups
dmaengine: idxd: fix memory leak in error handling path of idxd_setup_engines
dmaengine: idxd: fix memory leak in error handling path of idxd_setup_wqs
dmaengine: ptdma: Move variable condition check to the first place and remove redundancy
dmaengine: idxd: Fix allowing write() from different address spaces
dmaengine: ti: k3-udma: Add missing locking
dmaengine: ti: k3-udma: Use cap_mask directly from dma_device structure instead of a local copy
dmaengine: Revert "dmaengine: dmatest: Fix dmatest waiting less when interrupted"
dmaengine: idxd: cdev: Fix uninitialized use of sva in idxd_cdev_open
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
"A bunch of renesas fixes and few smaller fixes in other drivers:
- Rensas fixes for unbind ole detection, irq, locking etc
- tegra fixes for error handling at init and UTMI power states and
stray unlock fix
- rockchip missing assignment and pll output fixes
- startfive usb host detection fixes"
* tag 'phy-fixes-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: Fix error handling in tegra_xusb_port_init
phy: renesas: rcar-gen3-usb2: Set timing registers only once
phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off
phy: renesas: rcar-gen3-usb2: Lock around hardware registers and driver data
phy: renesas: rcar-gen3-usb2: Move IRQ request in probe
phy: renesas: rcar-gen3-usb2: Fix role detection on unbind/bind
phy: tegra: xusb: remove a stray unlock
phy: phy-rockchip-samsung-hdptx: Fix PHY PLL output 50.25MHz error
phy: starfive: jh7110-usb: Fix USB 2.0 host occasional detection failure
phy: rockchip-samsung-dcphy: Add missing assignment
phy: can-transceiver: Re-instate "mux-states" property presence check
phy: qcom-qmp-ufs: check for mode type for phy setting
phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fix from Vinod Koul:
- Fix for irq domain creation race in the core
* tag 'soundwire-6.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: bus: Fix race on the creation of the IRQ domain
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Nine singleton hotfixes, all MM. Four are cc:stable"
* tag 'mm-hotfixes-stable-2025-05-17-09-41' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: userfaultfd: correct dirty flags set for both present and swap pte
zsmalloc: don't underflow size calculation in zs_obj_write()
mm/page_alloc: fix race condition in unaccepted memory handling
mm/page_alloc: ensure try_alloc_pages() plays well with unaccepted memory
MAINTAINERS: add mm GUP section
mm/codetag: move tag retrieval back upfront in __free_pages()
mm/memory: fix mapcount / refcount sanity check for mTHP reuse
kernel/fork: only call untrack_pfn_clear() on VMAs duplicated for fork()
mm: hugetlb: fix incorrect fallback for subpool
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc irqchip driver fixes from Ingo Molnar:
- Remove the MSI_CHIP_FLAG_SET_ACK flag from 5 irqchip drivers
that did not require it
- Fix IRQ handling delays in the riscv-imsic irqchip driver
* tag 'irq-urgent-2025-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/riscv-imsic: Start local sync timer on correct CPU
irqchip: Drop MSI_CHIP_FLAG_SET_ACK from unsuspecting MSI drivers
|
