summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-12-19Merge branch 'pci/pciehp' into nextBjorn Helgaas6-328/+185
* pci/pciehp: PCI: pciehp: Move Attention & Power Indicator support tests to accessors PCI: pciehp: Use symbolic constants for Slot Control fields PCI: pciehp: Use symbolic constants, not hard-coded bitmask PCI: pciehp: Simplify "Power Fault Detected" checking/clearing PCI: pciehp: Announce slot capabilities (slot #, button, LEDs, etc) PCI: pciehp: Make various functions void since they can't fail PCI: pciehp: Remove error checks when accessing PCIe Capability PCI: pciehp: Drop pciehp_readw()/pciehp_writew() wrappers
2013-12-19Merge branch 'pci/host-tegra' into nextBjorn Helgaas1-1/+1
* pci/host-tegra: PCI: Disable Gen2 for Tegra20 and Tegra30
2013-12-19Merge branch 'pci/host-rcar' into nextBjorn Helgaas1-3/+9
* pci/host-rcar: PCI: rcar: Add runtime PM support PCI: rcar: Fix rcar_pci_probe() return value check
2013-12-19Merge branch 'pci/host-mvebu' into nextBjorn Helgaas1-31/+55
* pci/host-mvebu: PCI: mvebu: Remove duplicate of_clk_get_by_name() call PCI: mvebu: Support a bridge with no IO port window PCI: mvebu: Obey bridge PCI_COMMAND_MEM and PCI_COMMAND_IO bits PCI: mvebu: Drop writes to bridge Secondary Status register
2013-12-19Merge branch 'pci/host-imx6' into nextBjorn Helgaas1-27/+12
* pci/host-imx6: PCI: imx6: Remove unneeded 'goto err' PCI: imx6: Remove unneeded check of platform_get_resource()
2013-12-19Merge branch 'pci/host-designware' into nextBjorn Helgaas1-19/+40
* pci/host-designware: PCI: designware: Use typical "for" loop idiom PCI: designware: Remove redundant call to pci_write_config_word() PCI: designware: Fix crash in dw_msi_teardown_irq()
2013-12-19Merge branch 'pci/deletion' into nextBjorn Helgaas3-25/+22
* pci/deletion: PCI: Remove from bus_list and release resources in pci_release_dev() PCI: Move pci_proc_attach_device() to pci_bus_add_device() PCI: Use device_release_driver() in pci_stop_root_bus() PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev() Conflicts: drivers/pci/remove.c
2013-12-19Merge branch 'pci/aer' into nextBjorn Helgaas2-66/+77
* pci/aer: PCI/AER: Consolidate HEST error source parsers PCI/AER: Ignore non-PCIe AER error sources in aer_hest_parse() PCI/AER: Clean up error printing code a bit PCI/AER: Add a TLP header print helper
2013-12-19Merge branch 'eisa' into nextBjorn Helgaas1-1/+3
* eisa: EISA: Call put_device() if device_register() fails
2013-12-19PCI: Remove from bus_list and release resources in pci_release_dev()Yinghai Lu2-21/+19
Previously we removed the pci_dev from the bus_list and released its resources in pci_destroy_dev(). But that's too early: it's possible to call pci_destroy_dev() twice for the same device (e.g., via sysfs), and that will cause an oops when we try to remove it from bus_list the second time. We should remove it from the bus_list only when the last reference to the pci_dev has been released, i.e., in pci_release_dev(). [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-19PCI: Move pci_proc_attach_device() to pci_bus_add_device()Yinghai Lu2-2/+1
4f535093cf8f ("PCI: Put pci_dev in device tree as early as possible") moved pci_proc_attach_device() from pci_bus_add_device() to pci_device_add(). This moves it back to pci_bus_add_device(), essentially reverting that part of 4f535093cf8f. This makes it symmetric with pci_stop_dev(), where we call pci_proc_detach_device() and pci_remove_sysfs_dev_files() and set dev->is_added = 0. [bhelgaas: changelog, create sysfs then attach proc for symmetry] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-19PCI: Use device_release_driver() in pci_stop_root_bus()Yinghai Lu1-2/+2
To be consistent with 4bff6749905d ("PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev()", this changes pci_stop_root_bus() to use device_release_driver() instead of device_del(). This also changes pci_remove_root_bus() to use device_unregister() instead of put_device() so it corresponds with the device_register() call in pci_create_root_bus(). [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-19PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev()Rafael J. Wysocki1-1/+3
After commit bcdde7e221a8 (sysfs: make __sysfs_remove_dir() recursive) I'm seeing traces analogous to the one below in Thunderbolt testing: WARNING: CPU: 3 PID: 76 at /scratch/rafael/work/linux-pm/fs/sysfs/group.c:214 sysfs_remove_group+0x59/0xe0() sysfs group ffffffff81c6c500 not found for kobject '0000:08' Modules linked in: ... CPU: 3 PID: 76 Comm: kworker/u16:7 Not tainted 3.13.0-rc1+ #76 Hardware name: Acer Aspire S5-391/Venus , BIOS V1.02 05/29/2012 Workqueue: kacpi_hotplug acpi_hotplug_work_fn 0000000000000009 ffff8801644b9ac8 ffffffff816b23bf 0000000000000007 ffff8801644b9b18 ffff8801644b9b08 ffffffff81046607 ffff88016925b800 0000000000000000 ffffffff81c6c500 ffff88016924f928 ffff88016924f800 Call Trace: [<ffffffff816b23bf>] dump_stack+0x4e/0x71 [<ffffffff81046607>] warn_slowpath_common+0x87/0xb0 [<ffffffff810466d1>] warn_slowpath_fmt+0x41/0x50 [<ffffffff811e42ef>] ? sysfs_get_dirent_ns+0x6f/0x80 [<ffffffff811e5389>] sysfs_remove_group+0x59/0xe0 [<ffffffff8149f00b>] dpm_sysfs_remove+0x3b/0x50 [<ffffffff81495818>] device_del+0x58/0x1c0 [<ffffffff814959c8>] device_unregister+0x48/0x60 [<ffffffff813254fe>] pci_remove_bus+0x6e/0x80 [<ffffffff81325548>] pci_remove_bus_device+0x38/0x110 [<ffffffff8132555d>] pci_remove_bus_device+0x4d/0x110 [<ffffffff81325639>] pci_stop_and_remove_bus_device+0x19/0x20 [<ffffffff813418d0>] disable_slot+0x20/0xe0 [<ffffffff81341a38>] acpiphp_check_bridge+0xa8/0xd0 [<ffffffff813427ad>] hotplug_event+0x17d/0x220 [<ffffffff81342880>] hotplug_event_work+0x30/0x70 [<ffffffff8136d665>] acpi_hotplug_work_fn+0x18/0x24 [<ffffffff81061331>] process_one_work+0x261/0x450 [<ffffffff81061a7e>] worker_thread+0x21e/0x370 [<ffffffff81061860>] ? rescuer_thread+0x300/0x300 [<ffffffff81068342>] kthread+0xd2/0xe0 [<ffffffff81068270>] ? flush_kthread_worker+0x70/0x70 [<ffffffff816c19bc>] ret_from_fork+0x7c/0xb0 [<ffffffff81068270>] ? flush_kthread_worker+0x70/0x70 (Mika Westerberg sees them too in his tests). Some investigation documented in kernel bug #65281 led me to the conclusion that the source of the problem is the device_del() in pci_stop_dev() as it now causes the sysfs directory of the device to be removed recursively along with all of its subdirectories. That includes the sysfs directory of the device's subordinate bus (dev->subordinate) and its "power" group. Consequently, when pci_remove_bus() is called for dev->subordinate in pci_remove_bus_device(), it calls device_unregister(&bus->dev), but at this point the sysfs directory of bus->dev doesn't exist any more and its "power" group doesn't exist either. Thus, when dpm_sysfs_remove() called from device_del() tries to remove that group, it triggers the above warning. That indicates a logical mistake in the design of pci_stop_and_remove_bus_device(), which causes bus device objects to be left behind their parents (bridge device objects) and can be fixed by moving the device_del() from pci_stop_dev() into pci_destroy_dev(), so pci_remove_bus() can be called for the device's subordinate bus before the device itself is unregistered from the hierarchy. Still, the driver, if any, should be detached from the device in pci_stop_dev(), so use device_release_driver() directly from there. References: https://bugzilla.kernel.org/show_bug.cgi?id=65281#c6 Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-16PCI: pciehp: Move Attention & Power Indicator support tests to accessorsBjorn Helgaas2-29/+25
Previously, the caller checked ATTN_LED() or PWR_LED() to see whether the slot has indicators before setting the indicator state. That clutters the caller unnecessarily, so this moves the test inside the callees. The test may not even be necessary; per spec it should be harmless to try to turn on a non-existent LED. But checking first does avoid unnecessary hotplug commands. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-16PCI: pciehp: Use symbolic constants for Slot Control fieldsBjorn Helgaas2-58/+36
Add symbolic constants for the PCIe Slot Control indicator and power control fields defined by spec and use them instead of open-coded hex constants. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-16PCI: pciehp: Use symbolic constants, not hard-coded bitmaskBjorn Helgaas1-1/+4
Use the PCI_EXP_SLTSTA definitions, not 0x1f, when clearing Slot Status bits. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-16PCI: pciehp: Simplify "Power Fault Detected" checking/clearingBjorn Helgaas1-3/+3
It's simpler to test the PCI_EXP_SLTSTA_PFD bit directly and to write the constant back to PCI_EXP_SLTSTA. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-16PCI: pciehp: Announce slot capabilities (slot #, button, LEDs, etc)Bjorn Helgaas1-3/+12
We already have the vendor/device IDs from pci_setup_device(), so drop that info and print things that will be more useful for debugging: the slot number and presence of button/indicators/link active reporting/etc. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-16PCI: pciehp: Make various functions void since they can't failBjorn Helgaas5-89/+54
These functions: pcie_enable_notification() pciehp_power_off_slot() pciehp_get_power_status() pciehp_get_attention_status() pciehp_set_attention_status() pciehp_get_latch_status() pciehp_get_adapter_status() pcie_write_cmd() now always return success, so this patch makes them void and drops the error-checking code in their callers. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-16PCI: pciehp: Remove error checks when accessing PCIe CapabilityBjorn Helgaas1-136/+41
There's not much point in checking the return value from every config space access because the only likely errors are design-time things like unaligned accesses or invalid register numbers. The checking clutters the code significantly, so this patch removes it. No functional change. Reference: http://lkml.kernel.org/r/CA+55aFzP4xEbcNmZ+MS0SQ3LrULzSq+dBiT_X9U-bPpR-Ukgrw@mail.gmail.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-15PCI: pciehp: Drop pciehp_readw()/pciehp_writew() wrappersBjorn Helgaas1-47/+48
The pciehp_readw() and pciehp_writew() wrappers only look up the pci_dev and call the PCIe Capability accessors, so we can make things a little more straightforward by just using the PCIe Capability accessors directly. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-14PCI/AER: Consolidate HEST error source parsersBjorn Helgaas1-16/+17
aer_hest_parse() and aer_hest_parse_aff() are almost identical. We use aer_hest_parse() to check the ACPI_HEST_FIRMWARE_FIRST flag for a specific device, and we use aer_hest_parse_aff() to check to see if any device sets the flag. This drops aer_hest_parse_aff() and enhances aer_hest_parse() so it collects the union of the PCIe ACPI_HEST_FIRMWARE_FIRST flag settings when no specific device is supplied. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Betty Dall <betty.dall@hp.com>
2013-12-14PCI/AER: Ignore non-PCIe AER error sources in aer_hest_parse()Betty Dall1-8/+17
aer_set_firmware_first() searches the HEST for an error source descriptor matching the specified PCI device. It uses the apei_hest_parse() iterator to call aer_hest_parse() for every descriptor in the HEST. Previously, aer_hest_parse() incorrectly assumed every descriptor was for a PCIe error source. This patch adds a check to avoid that error. [bhelgaas: factor check into helper, use in aer_hest_parse_aff(), changelog] Signed-off-by: Betty Dall <betty.dall@hp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-14PCI/AER: Clean up error printing code a bitBorislav Petkov1-24/+27
Save one indentation level in aer_print_error() for the generic case where we have info->status of an error, disregard 80 cols rule a bit for the sake of better readability, fix alignment. No functionality change. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-14PCI/AER: Add a TLP header print helperBorislav Petkov1-23/+21
... and call it instead of duplicating the large printk format statement. No functionality change. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-13EISA: Call put_device() if device_register() failsLevente Kurusa1-1/+3
We need to give up the last reference to edev->dev, so we need to call put_device(). Signed-off-by: Levente Kurusa <levex@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-13Merge branch 'pci/yijing-dev_is_pci' into nextBjorn Helgaas10-44/+29
* pci/yijing-dev_is_pci: alpha/PCI: Use dev_is_pci() to identify PCI devices arm/PCI: Use dev_is_pci() to identify PCI devices arm/PCI: Use dev_is_pci() to identify PCI devices parisc/PCI: Use dev_is_pci() to identify PCI devices sparc/PCI: Use dev_is_pci() to identify PCI devices ia64/PCI: Use dev_is_pci() to identify PCI devices x86/PCI: Use dev_is_pci() to identify PCI devices PCI: Use dev_is_pci() to identify PCI devices
2013-12-13Merge branch 'pci/misc' into nextBjorn Helgaas9-20/+32
* pci/misc: PCI: Stop clearing bridge Secondary Status when setting up I/O aperture PCI: Prevent bus conflicts while checking for bridge apertures PCI: Drop "irq" param from *_restore_msi_irqs() PCI/portdrv: Remove superfluous name cast PCI: Clear NumVFs when disabling SR-IOV in sriov_init()
2013-12-13Merge branch 'for-linus' into nextBjorn Helgaas8-46/+103
* for-linus: MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers PCI: Disable Bus Master only on kexec reboot PCI: mvebu: Return 'unsupported' for Interrupt Line and Interrupt Pin PCI: Omit PCI ID macro strings to shorten quirk names PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev() Revert "workqueue: allow work_on_cpu() to be called recursively" PCI: Avoid unnecessary CPU switch when calling driver .probe() method
2013-12-13PCI: Stop clearing bridge Secondary Status when setting up I/O apertureBjorn Helgaas1-5/+5
pci_setup_bridge_io() accessed PCI_IO_BASE and PCI_IO_LIMIT using dword (32-bit) reads and writes, which also access the Secondary Status register. Since the Secondary Status register is in the upper 16 bits of the dword, and we preserved those upper 16 bits, this had the effect of clearing any of the write-1-to-clear bits that happened to be set in the Secondary Status register. That's not what we want, so use word (16-bit) accesses to update only PCI_IO_BASE and PCI_IO_LIMIT. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-13PCI: Prevent bus conflicts while checking for bridge aperturesBjorn Helgaas1-2/+4
pci_bridge_check_ranges() determines whether the bridge supports an I/O aperture and a prefetchable memory aperture. Previously, if the I/O aperture was unsupported, disabled, or configured at [io 0x0000-0x0fff], we wrote 0xf0 to PCI_IO_BASE and PCI_IO_LIMIT, which, if the bridge supports it, enables the I/O aperture at [io 0xf000-0xffff]. The enabled aperture may conflict with other devices in the system. Similarly, we wrote 0xfff0 to PCI_PREF_MEMORY_BASE and PCI_PREF_MEMORY_LIMIT, which enables the prefetchable memory aperture at [mem 0xfff00000-0xffffffff], and that may also conflict with other devices. All we need to know is whether the base and limit registers are writable, so we can use values that leave the apertures disabled, e.g., PCI_IO_BASE = 0xf0, PCI_IO_LIMIT = 0xe0, PCI_PREF_MEMORY_BASE = 0xfff0, PCI_PREF_MEMORY_LIMIT = 0xffe0. Writing non-zero values to both the base and limit registers means we detect whether either or both are writable, as we did before. Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Based-on-patch-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-13PCI: Drop "irq" param from *_restore_msi_irqs()DuanZhenzhong6-12/+21
Change x86_msi.restore_msi_irqs(struct pci_dev *dev, int irq) to x86_msi.restore_msi_irqs(struct pci_dev *dev). restore_msi_irqs() restores multiple MSI-X IRQs, so param 'int irq' is unneeded. This makes code more consistent between vm and bare metal. Dom0 MSI-X restore code can also be optimized as XEN only has a hypercall to restore all MSI-X vectors at one time. Tested-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-12-13PCI/portdrv: Remove superfluous name castGeert Uytterhoeven1-1/+1
device_driver.name is "const char *" Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-12alpha/PCI: Use dev_is_pci() to identify PCI devicesYijing Wang1-1/+1
Use dev_is_pci() instead of checking bus type directly. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-12arm/PCI: Use dev_is_pci() to identify PCI devicesYijing Wang1-3/+3
Use dev_is_pci() instead of checking bus type directly. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-12arm/PCI: Use dev_is_pci() to identify PCI devicesYijing Wang1-2/+2
Use dev_is_pci() instead of checking bus type directly. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-12parisc/PCI: Use dev_is_pci() to identify PCI devicesYijing Wang1-17/+5
Use dev_is_pci() instead of equivalent local function. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-12sparc/PCI: Use dev_is_pci() to identify PCI devicesYijing Wang2-4/+3
Use dev_is_pci() instead of checking bus type directly. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-11MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainersBjorn Helgaas1-0/+33
Add entries for PCI host controller drivers in drivers/pci/host/. Signed-off-by: Mohit Kumar <mohit.kumar@st.com> # DESIGNWARE Signed-off-by: Pratyush Anand <pratyush.anand@st.com> # DESIGNWARE Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> # R-CAR Double-Plus-Acked-by: Jason Cooper <jason@lakedaemon.net> # MVEBU Acked-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Richard Zhu <r65037@freescale.com> # IMX6
2013-12-10ia64/PCI: Use dev_is_pci() to identify PCI devicesYijing Wang2-13/+13
Use dev_is_pci() instead of checking bus type directly. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-10x86/PCI: Use dev_is_pci() to identify PCI devicesYijing Wang1-3/+1
Use dev_is_pci() instead of checking bus type directly. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-10PCI: Use dev_is_pci() to identify PCI devicesYijing Wang1-1/+1
Use dev_is_pci() instead of checking bus type directly. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-10PCI: mvebu: Remove duplicate of_clk_get_by_name() callAndrew Lunn1-8/+0
Probably due to a merge conflict resolution gone bad, the PCI clock is got twice. Remove the redundant call of of_clk_get_by_name(). Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jason Cooper <jason@lakedaemon.net>
2013-12-10PCI: rcar: Add runtime PM supportValentine Barshak1-1/+7
If runtime PM is enabled in the kernel config, the PCI clocks are not forced on at start-up, and thus, are never enabled. Use pm_runtime_get_sync() to enable the clocks. While at it, use dev_info() instead of pr_info() since now we have the device pointer available in the PCI setup callback. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-10PCI: imx6: Remove unneeded 'goto err'Fabio Estevam1-22/+12
There is no need to use 'goto err' as we can directly return the errors. No functional change. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-10PCI: designware: Use typical "for" loop idiomBjorn Helgaas1-6/+2
It's conventional to use "for" rather than "while" for simple iteration. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-10PCI: designware: Remove redundant call to pci_write_config_word()Bjørn Erik Nilsen1-4/+4
write_msi_msg() does exactly the same so there is no need to explicitly call pci_write_config_word() and do the same twice. Tested-by: Mohit Kumar <mohit.kumar@st.com> Signed-off-by: Bjørn Erik Nilsen <ben@datarespons.no> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Jingoo Han <jg1.han@samsung.com>
2013-12-10PCI: designware: Fix crash in dw_msi_teardown_irq()Bjørn Erik Nilsen1-12/+37
904d0e788993 ("PCI: designware: Add irq_create_mapping()") resulted in pre-allocated irq descs. Problem was that in assign_irq() these descs were explicitly allocated and hence also freed, resulting in a crash. We also need to clear the entire irq range in teardown. With this commit the teardown basically does exactly the opposite of what was done in setup. The crash this fixes looks like: Unable to handle kernel NULL pointer dereference at virtual address 00000020 PC is at dw_msi_teardown_irq+0x40/0x118 LR is at trace_hardirqs_on_caller+0xf4/0x1c0 Backtrace: [<802c401c>] (dw_msi_teardown_irq+0x0/0x118) from [<802c1844>] (arch_teardown_msi_irq+0x3c/0x40) [<802c1808>] (arch_teardown_msi_irq+0x0/0x40) from [<802c1a08>] (default_teardown_msi_irqs+0x68/0x84) [<802c19a0>] (default_teardown_msi_irqs+0x0/0x84) from [<802c1a34>] (arch_teardown_msi_irqs+0x10/0x14) [<802c1a24>] (arch_teardown_msi_irqs+0x0/0x14) from [<802c1ad0>] (free_msi_irqs+0x98/0x144) [<802c1a38>] (free_msi_irqs+0x0/0x144) from [<802c2570>] (pci_disable_msi+0x48/0x60) [<802c2528>] (pci_disable_msi+0x0/0x60) from [<7f0057d4>] (sxdma_irq_free+0x44/0x48 [sxdma]) [bhelgaas: add crash info] Tested-by: Mohit Kumar <mohit.kumar@st.com> Signed-off-by: Bjørn Erik Nilsen <ben@datarespons.no> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Jingoo Han <jg1.han@samsung.com>
2013-12-10PCI: imx6: Remove unneeded check of platform_get_resource()Fabio Estevam1-5/+0
When using devm_ioremap_resource(), we do not need to check the return value of platform_get_resource(), so just remove it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Marek Vasut <marex@denx.de>
2013-12-08PCI: rcar: Fix rcar_pci_probe() return value checkWei Yongjun1-2/+2
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 21:16:17 +0300