summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-01-24netfilter: conntrack: unify established states for SCTP pathsSriram Yagnaraman5-71/+44
An SCTP endpoint can start an association through a path and tear it down over another one. That means the initial path will not see the shutdown sequence, and the conntrack entry will remain in ESTABLISHED state for 5 days. By merging the HEARTBEAT_ACKED and ESTABLISHED states into one ESTABLISHED state, there remains no difference between a primary or secondary path. The timeout for the merged ESTABLISHED state is set to 210 seconds (hb_interval * max_path_retrans + rto_max). So, even if a path doesn't see the shutdown sequence, it will expire in a reasonable amount of time. With this change in place, there is now more than one state from which we can transition to ESTABLISHED, COOKIE_ECHOED and HEARTBEAT_SENT, so handle the setting of ASSURED bit whenever a state change has happened and the new state is ESTABLISHED. Removed the check for dir==REPLY since the transition to ESTABLISHED can happen only in the reply direction. Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.") Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-01-24Revert "netfilter: conntrack: add sctp DATA_SENT state"Sriram Yagnaraman4-70/+42
This reverts commit (bff3d0534804: "netfilter: conntrack: add sctp DATA_SENT state") Using DATA/SACK to detect a new connection on secondary/alternate paths works only on new connections, while a HEARTBEAT is required on connection re-use. It is probably consistent to wait for HEARTBEAT to create a secondary connection in conntrack. Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-01-24netfilter: conntrack: fix bug in for_each_sctp_chunkSriram Yagnaraman1-2/+2
skb_header_pointer() will return NULL if offset + sizeof(_sch) exceeds skb->len, so this offset < skb->len test is redundant. if sch->length == 0, this will end up in an infinite loop, add a check for sch->length > 0 Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.") Suggested-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-01-24netfilter: conntrack: fix vtag checks for ABORT/SHUTDOWN_COMPLETESriram Yagnaraman1-9/+16
RFC 9260, Sec 8.5.1 states that for ABORT/SHUTDOWN_COMPLETE, the chunk MUST be accepted if the vtag of the packet matches its own tag and the T bit is not set OR if it is set to its peer's vtag and the T bit is set in chunk flags. Otherwise the packet MUST be silently dropped. Update vtag verification for ABORT/SHUTDOWN_COMPLETE based on the above description. Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.") Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-01-24Merge branch '40GbE' of ↵Jakub Kicinski4-69/+66
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-01-20 (iavf) This series contains updates to iavf driver only. Michal Schmidt converts single iavf workqueue to per adapter to avoid deadlock issues. Marcin moves setting of VLAN related netdev features to watchdog task to avoid RTNL deadlock. Stefan Assmann schedules immediate watchdog task execution on changing primary MAC to avoid excessive delay. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf: schedule watchdog immediately when changing primary MAC iavf: Move netdev_update_features() into watchdog task iavf: fix temporary deadlock and failure to set MAC address ==================== Link: https://lore.kernel.org/r/20230120211036.430946-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski1-128/+204
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Fix overlap detection in rbtree set backend: Detect overlap by going through the ordered list of valid tree nodes. To shorten the number of visited nodes in the list, this algorithm descends the tree to search for an existing element greater than the key value to insert that is greater than the new element. 2) Fix for the rbtree set garbage collector: Skip inactive and busy elements when checking for expired elements to avoid interference with an ongoing transaction from control plane. This is a rather large fix coming at this stage of the 6.2-rc. Since 33c7aba0b4ff ("netfilter: nf_tables: do not set up extensions for end interval"), bogus overlap errors in the rbtree set occur more frequently. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_set_rbtree: skip elements in transaction from garbage collection netfilter: nft_set_rbtree: Switch to node list walk for overlap detection ==================== Link: https://lore.kernel.org/r/20230123211601.292930-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-24MAINTAINERS: Update MPTCP maintainer list and CREDITSMat Martineau2-1/+7
My responsibilities at Intel have changed, so I'm handing off exclusive MPTCP subsystem maintainer duties to Matthieu. It has been a privilege to see MPTCP through its initial upstreaming and first few years in the upstream kernel! Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Link: https://lore.kernel.org/r/20230120231121.36121-1-mathew.j.martineau@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-24net: ethernet: adi: adin1110: Fix multicast offloadingAlexandru Tachici1-1/+1
Driver marked broadcast/multicast frames as offloaded incorrectly. Mark them as offloaded only when HW offloading has been enabled. This should happen only for ADIN2111 when both ports are bridged by the software. Fixes: bc93e19d088b ("net: ethernet: adi: Add ADIN1110 support") Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230120090846.18172-1-alexandru.tachici@analog.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-24net: dsa: microchip: fix probe of I2C-connected KSZ8563Ahmad Fatoum1-1/+1
Starting with commit eee16b147121 ("net: dsa: microchip: perform the compatibility check for dev probed"), the KSZ switch driver now bails out if it thinks the DT compatible doesn't match the actual chip ID read back from the hardware: ksz9477-switch 1-005f: Device tree specifies chip KSZ9893 but found KSZ8563, please fix it! For the KSZ8563, which used ksz_switch_chips[KSZ9893], this was fine at first, because it indeed shares the same chip id as the KSZ9893. Commit b44908095612 ("net: dsa: microchip: add separate struct ksz_chip_data for KSZ8563 chip") started differentiating KSZ9893 compatible chips by consulting the 0x1F register. The resulting breakage was fixed for the SPI driver in the same commit by introducing the appropriate ksz_switch_chips[KSZ8563], but not for the I2C driver. Fix this for I2C-connected KSZ8563 now to get it probing again. Fixes: b44908095612 ("net: dsa: microchip: add separate struct ksz_chip_data for KSZ8563 chip"). Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230120110933.1151054-1-a.fatoum@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-24ipv4: prevent potential spectre v1 gadget in fib_metrics_match()Eric Dumazet1-0/+2
if (!type) continue; if (type > RTAX_MAX) return false; ... fi_val = fi->fib_metrics->metrics[type - 1]; @type being used as an array index, we need to prevent cpu speculation or risk leaking kernel memory content. Fixes: 5f9ae3d9e7e4 ("ipv4: do metrics match when looking up and deleting a route") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230120133140.3624204-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-24ipv4: prevent potential spectre v1 gadget in ip_metrics_convert()Eric Dumazet1-0/+2
if (!type) continue; if (type > RTAX_MAX) return -EINVAL; ... metrics[type - 1] = val; @type being used as an array index, we need to prevent cpu speculation or risk leaking kernel memory content. Fixes: 6cf9dfd3bd62 ("net: fib: move metrics parsing to a helper") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230120133040.3623463-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-24Merge branch 'netlink-annotate-various-data-races'Jakub Kicinski1-14/+24
Eric Dumazet says: ==================== netlink: annotate various data races A recent syzbot report came to my attention. After addressing it, I also fixed other related races. ==================== Link: https://lore.kernel.org/r/20230120125955.3453768-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-24netlink: annotate data races around sk_stateEric Dumazet1-4/+6
netlink_getsockbyportid() reads sk_state while a concurrent netlink_connect() can change its value. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-24netlink: annotate data races around dst_portid and dst_groupEric Dumazet1-9/+14
netlink_getname(), netlink_sendmsg() and netlink_getsockbyportid() can read nlk->dst_portid and nlk->dst_group while another thread is changing them. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-24netlink: annotate data races around nlk->portidEric Dumazet1-2/+5
syzbot reminds us netlink_getname() runs locklessly [1] This first patch annotates the race against nlk->portid. Following patches take care of the remaining races. [1] BUG: KCSAN: data-race in netlink_getname / netlink_insert write to 0xffff88814176d310 of 4 bytes by task 2315 on cpu 1: netlink_insert+0xf1/0x9a0 net/netlink/af_netlink.c:583 netlink_autobind+0xae/0x180 net/netlink/af_netlink.c:856 netlink_sendmsg+0x444/0x760 net/netlink/af_netlink.c:1895 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0x38f/0x500 net/socket.c:2476 ___sys_sendmsg net/socket.c:2530 [inline] __sys_sendmsg+0x19a/0x230 net/socket.c:2559 __do_sys_sendmsg net/socket.c:2568 [inline] __se_sys_sendmsg net/socket.c:2566 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2566 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffff88814176d310 of 4 bytes by task 2316 on cpu 0: netlink_getname+0xcd/0x1a0 net/netlink/af_netlink.c:1144 __sys_getsockname+0x11d/0x1b0 net/socket.c:2026 __do_sys_getsockname net/socket.c:2041 [inline] __se_sys_getsockname net/socket.c:2038 [inline] __x64_sys_getsockname+0x3e/0x50 net/socket.c:2038 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x00000000 -> 0xc9a49780 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 2316 Comm: syz-executor.2 Not tainted 6.2.0-rc3-syzkaller-00030-ge8f60cd7db24-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-23netfilter: nft_set_rbtree: skip elements in transaction from garbage collectionPablo Neira Ayuso1-1/+15
Skip interference with an ongoing transaction, do not perform garbage collection on inactive elements. Reset annotated previous end interval if the expired element is marked as busy (control plane removed the element right before expiration). Fixes: 8d8540c4f5e0 ("netfilter: nft_set_rbtree: add timeout support") Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-01-23netfilter: nft_set_rbtree: Switch to node list walk for overlap detectionPablo Neira Ayuso1-127/+189
...instead of a tree descent, which became overly complicated in an attempt to cover cases where expired or inactive elements would affect comparisons with the new element being inserted. Further, it turned out that it's probably impossible to cover all those cases, as inactive nodes might entirely hide subtrees consisting of a complete interval plus a node that makes the current insertion not overlap. To speed up the overlap check, descent the tree to find a greater element that is closer to the key value to insert. Then walk down the node list for overlap detection. Starting the overlap check from rb_first() unconditionally is slow, it takes 10 times longer due to the full linear traversal of the list. Moreover, perform garbage collection of expired elements when walking down the node list to avoid bogus overlap reports. For the insertion operation itself, this essentially reverts back to the implementation before commit 7c84d41416d8 ("netfilter: nft_set_rbtree: Detect partial overlaps on insertion"), except that cases of complete overlap are already handled in the overlap detection phase itself, which slightly simplifies the loop to find the insertion point. Based on initial patch from Stefano Brivio, including text from the original patch description too. Fixes: 7c84d41416d8 ("netfilter: nft_set_rbtree: Detect partial overlaps on insertion") Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-01-23ipv6: fix reachability confirmation with proxy_ndpGergely Risko1-1/+14
When proxying IPv6 NDP requests, the adverts to the initial multicast solicits are correct and working. On the other hand, when later a reachability confirmation is requested (on unicast), no reply is sent. This causes the neighbor entry expiring on the sending node, which is mostly a non-issue, as a new multicast request is sent. There are routers, where the multicast requests are intentionally delayed, and in these environments the current implementation causes periodic packet loss for the proxied endpoints. The root cause is the erroneous decrease of the hop limit, as this is checked in ndisc.c and no answer is generated when it's 254 instead of the correct 255. Cc: stable@vger.kernel.org Fixes: 46c7655f0b56 ("ipv6: decrease hop limit counter in ip6_forward()") Signed-off-by: Gergely Risko <gergely.risko@gmail.com> Tested-by: Gergely Risko <gergely.risko@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-23Merge branch 'ethtool-mac-merge'David S. Miller1-0/+26
Vladimir Oltean say: ==================== ethtool support for IEEE 802.3 MAC Merge layer Change log ---------- v3->v4: - add missing opening bracket in ocelot_port_mm_irq() - moved cfg.verify_time range checking so that it actually takes place for the updated rather than old value v3 at: https://patchwork.kernel.org/project/netdevbpf/cover/20230117085947.2176464-1-vladimir.oltean@nxp.com/ v2->v3: - made get_mm return int instead of void - deleted ETHTOOL_A_MM_SUPPORTED - renamed ETHTOOL_A_MM_ADD_FRAG_SIZE to ETHTOOL_A_MM_TX_MIN_FRAG_SIZE - introduced ETHTOOL_A_MM_RX_MIN_FRAG_SIZE - cleaned up documentation - rebased on top of PLCA changes - renamed ETHTOOL_STATS_SRC_* to ETHTOOL_MAC_STATS_SRC_* v2 at: https://patchwork.kernel.org/project/netdevbpf/cover/20230111161706.1465242-1-vladimir.oltean@nxp.com/ v1->v2: I've decided to focus just on the MAC Merge layer for now, which is why I am able to submit this patch set as non-RFC. v1 (RFC) at: https://patchwork.kernel.org/project/netdevbpf/cover/20220816222920.1952936-1-vladimir.oltean@nxp.com/ What is being introduced ------------------------ TL;DR: a MAC Merge layer as defined by IEEE 802.3-2018, clause 99 (interspersing of express traffic). This is controlled through ethtool netlink (ETHTOOL_MSG_MM_GET, ETHTOOL_MSG_MM_SET). The raw ethtool commands are posted here: https://patchwork.kernel.org/project/netdevbpf/cover/20230111153638.1454687-1-vladimir.oltean@nxp.com/ The MAC Merge layer has its own statistics counters (ethtool --include-statistics --show-mm swp0) as well as two member MACs, the statistics of which can be queried individually, through a new ethtool netlink attribute, corresponding to: $ ethtool -I --show-pause eno2 --src aggregate $ ethtool -S eno2 --groups eth-mac eth-phy eth-ctrl rmon -- --src pmac The core properties of the MAC Merge layer are described in great detail in patches 02/12 and 03/12. They can be viewed in "make htmldocs" format. Devices for which the API is supported -------------------------------------- I decided to start with the Ethernet switch on NXP LS1028A (Felix) because of the smaller patch set. I also have support for the ENETC controller pending. I would like to get confirmation that the UAPI being proposed here will not restrict any use cases known by other hardware vendors. Why is support for preemptible traffic classes not here? -------------------------------------------------------- There is legitimate concern whether the 802.1Q portion of the standard (which traffic classes go to the eMAC and which to the pMAC) should be modeled in Linux using tc or using another UAPI. I think that is stalling the entire series, but should be discussed separately instead. Removing FP adminStatus support makes me confident enough to submit this patch set without an RFC tag (meaning: I wouldn't mind if it was merged as is). What is submitted here is sufficient for an LLDP daemon to do its job. I've patched openlldp to advertise and configure frame preemption: https://github.com/vladimiroltean/openlldp/tree/frame-preemption-v3 In case someone wants to try it out, here are some commands I've used. # Configure the interfaces to receive and transmit LLDP Data Units lldptool -L -i eno0 adminStatus=rxtx lldptool -L -i swp0 adminStatus=rxtx # Enable the transmission of certain TLVs on switch's interface lldptool -T -i eno0 -V addEthCap enableTx=yes lldptool -T -i swp0 -V addEthCap enableTx=yes # Query LLDP statistics on switch's interface lldptool -S -i swp0 # Query the received neighbor TLVs lldptool -i swp0 -t -n -V addEthCap Additional Ethernet Capabilities TLV Preemption capability supported Preemption capability enabled Preemption capability active Additional fragment size: 60 octets So using this patch set, lldpad will be able to advertise and configure frame preemption, but still, no data packet will be sent as preemptible over the link, because there is no UAPI to control which traffic classes are sent as preemptible and which as express. Preemptable or preemptible? --------------------------- IEEE 802.3 uses "preemptable" throughout. IEEE 802.1Q uses "preemptible" throughout. Because the definition of "preemptible" falls under 802.1Q's jurisdiction and 802.3 just references it, I went with the 802.1Q naming even where supporting an 802.3 feature. Also, checkpatch agrees with this. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-23net: ethtool: netlink: introduce ethnl_update_bool()Vladimir Oltean1-0/+26
Due to the fact that the kernel-side data structures have been carried over from the ioctl-based ethtool, we are now in the situation where we have an ethnl_update_bool32() function, but the plain function that operates on a boolean value kept in an actual u8 netlink attribute doesn't exist. With new ethtool features that are exposed solely over netlink, the kernel data structures will use the "bool" type, so we will need this kind of helper. Introduce it now; it's needed for things like verify-disabled for the MAC merge configuration. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-23net: fec: Use page_pool_put_full_page when freeing rx buffersWei Fang1-1/+1
The page_pool_release_page was used when freeing rx buffers, and this function just unmaps the page (if mapped) and does not recycle the page. So after hundreds of down/up the eth0, the system will out of memory. For more details, please refer to the following reproduce steps and bug logs. To solve this issue and refer to the doc of page pool, the page_pool_put_full_page should be used to replace page_pool_release_page. Because this API will try to recycle the page if the page refcnt equal to 1. After testing 20000 times, the issue can not be reproduced anymore (about testing 391 times the issue will occur on i.MX8MN-EVK before). Reproduce steps: Create the test script and run the script. The script content is as follows: LOOPS=20000 i=1 while [ $i -le $LOOPS ] do echo "TINFO:ENET $curface up and down test $i times" org_macaddr=$(cat /sys/class/net/eth0/address) ifconfig eth0 down ifconfig eth0 hw ether $org_macaddr up i=$(expr $i + 1) done sleep 5 if cat /sys/class/net/eth0/operstate | grep 'up';then echo "TEST PASS" else echo "TEST FAIL" fi Bug detail logs: TINFO:ENET up and down test 391 times [ 850.471205] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) [ 853.535318] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 853.541694] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 870.590531] page_pool_release_retry() stalled pool shutdown 199 inflight 60 sec [ 931.006557] page_pool_release_retry() stalled pool shutdown 199 inflight 120 sec TINFO:ENET up and down test 392 times [ 991.426544] page_pool_release_retry() stalled pool shutdown 192 inflight 181 sec [ 1051.838531] page_pool_release_retry() stalled pool shutdown 170 inflight 241 sec [ 1093.751217] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) [ 1096.446520] page_pool_release_retry() stalled pool shutdown 308 inflight 60 sec [ 1096.831245] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 1096.839092] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1112.254526] page_pool_release_retry() stalled pool shutdown 103 inflight 302 sec [ 1156.862533] page_pool_release_retry() stalled pool shutdown 308 inflight 120 sec [ 1172.674516] page_pool_release_retry() stalled pool shutdown 103 inflight 362 sec [ 1217.278532] page_pool_release_retry() stalled pool shutdown 308 inflight 181 sec TINFO:ENET up and down test 393 times [ 1233.086535] page_pool_release_retry() stalled pool shutdown 103 inflight 422 sec [ 1277.698513] page_pool_release_retry() stalled pool shutdown 308 inflight 241 sec [ 1293.502525] page_pool_release_retry() stalled pool shutdown 86 inflight 483 sec [ 1338.110518] page_pool_release_retry() stalled pool shutdown 308 inflight 302 sec [ 1353.918540] page_pool_release_retry() stalled pool shutdown 32 inflight 543 sec [ 1361.179205] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) [ 1364.255298] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 1364.263189] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1371.998532] page_pool_release_retry() stalled pool shutdown 310 inflight 60 sec [ 1398.530542] page_pool_release_retry() stalled pool shutdown 308 inflight 362 sec [ 1414.334539] page_pool_release_retry() stalled pool shutdown 16 inflight 604 sec [ 1432.414520] page_pool_release_retry() stalled pool shutdown 310 inflight 120 sec [ 1458.942523] page_pool_release_retry() stalled pool shutdown 308 inflight 422 sec [ 1474.750521] page_pool_release_retry() stalled pool shutdown 16 inflight 664 sec TINFO:ENET up and down test 394 times [ 1492.830522] page_pool_release_retry() stalled pool shutdown 310 inflight 181 sec [ 1519.358519] page_pool_release_retry() stalled pool shutdown 308 inflight 483 sec [ 1535.166545] page_pool_release_retry() stalled pool shutdown 2 inflight 724 sec [ 1537.090278] eth_test2.sh invoked oom-killer: gfp_mask=0x400dc0(GFP_KERNEL_ACCOUNT|__GFP_ZERO), order=0, oom_score_adj=0 [ 1537.101192] CPU: 3 PID: 2379 Comm: eth_test2.sh Tainted: G C 6.1.1+g56321e101aca #1 [ 1537.110249] Hardware name: NXP i.MX8MNano EVK board (DT) [ 1537.115561] Call trace: [ 1537.118005] dump_backtrace.part.0+0xe0/0xf0 [ 1537.122289] show_stack+0x18/0x40 [ 1537.125608] dump_stack_lvl+0x64/0x80 [ 1537.129276] dump_stack+0x18/0x34 [ 1537.132592] dump_header+0x44/0x208 [ 1537.136083] oom_kill_process+0x2b4/0x2c0 [ 1537.140097] out_of_memory+0xe4/0x594 [ 1537.143766] __alloc_pages+0xb68/0xd00 [ 1537.147521] alloc_pages+0xac/0x160 [ 1537.151013] __get_free_pages+0x14/0x40 [ 1537.154851] pgd_alloc+0x1c/0x30 [ 1537.158082] mm_init+0xf8/0x1d0 [ 1537.161228] mm_alloc+0x48/0x60 [ 1537.164368] alloc_bprm+0x7c/0x240 [ 1537.167777] do_execveat_common.isra.0+0x70/0x240 [ 1537.172486] __arm64_sys_execve+0x40/0x54 [ 1537.176502] invoke_syscall+0x48/0x114 [ 1537.180255] el0_svc_common.constprop.0+0xcc/0xec [ 1537.184964] do_el0_svc+0x2c/0xd0 [ 1537.188280] el0_svc+0x2c/0x84 [ 1537.191340] el0t_64_sync_handler+0xf4/0x120 [ 1537.195613] el0t_64_sync+0x18c/0x190 [ 1537.199334] Mem-Info: [ 1537.201620] active_anon:342 inactive_anon:10343 isolated_anon:0 [ 1537.201620] active_file:54 inactive_file:112 isolated_file:0 [ 1537.201620] unevictable:0 dirty:0 writeback:0 [ 1537.201620] slab_reclaimable:2620 slab_unreclaimable:7076 [ 1537.201620] mapped:1489 shmem:2473 pagetables:466 [ 1537.201620] sec_pagetables:0 bounce:0 [ 1537.201620] kernel_misc_reclaimable:0 [ 1537.201620] free:136672 free_pcp:96 free_cma:129241 [ 1537.240419] Node 0 active_anon:1368kB inactive_anon:41372kB active_file:216kB inactive_file:5052kB unevictable:0kB isolated(anon):0kB isolated(file):0kB s [ 1537.271422] Node 0 DMA free:541636kB boost:0kB min:30000kB low:37500kB high:45000kB reserved_highatomic:0KB active_anon:1368kB inactive_anon:41372kB actiB [ 1537.300219] lowmem_reserve[]: 0 0 0 0 [ 1537.303929] Node 0 DMA: 1015*4kB (UMEC) 743*8kB (UMEC) 417*16kB (UMEC) 235*32kB (UMEC) 116*64kB (UMEC) 25*128kB (UMEC) 4*256kB (UC) 2*512kB (UC) 0*1024kBB [ 1537.323938] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=1048576kB [ 1537.332708] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=32768kB [ 1537.341292] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB [ 1537.349776] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=64kB [ 1537.358087] 2939 total pagecache pages [ 1537.361876] 0 pages in swap cache [ 1537.365229] Free swap = 0kB [ 1537.368147] Total swap = 0kB [ 1537.371065] 516096 pages RAM [ 1537.373959] 0 pages HighMem/MovableOnly [ 1537.377834] 17302 pages reserved [ 1537.381103] 163840 pages cma reserved [ 1537.384809] 0 pages hwpoisoned [ 1537.387902] Tasks state (memory values in pages): [ 1537.392652] [ pid ] uid tgid total_vm rss pgtables_bytes swapents oom_score_adj name [ 1537.401356] [ 201] 993 201 1130 72 45056 0 0 rpcbind [ 1537.409772] [ 202] 0 202 4529 1640 77824 0 -250 systemd-journal [ 1537.418861] [ 222] 0 222 4691 801 69632 0 -1000 systemd-udevd [ 1537.427787] [ 248] 994 248 20914 130 65536 0 0 systemd-timesyn [ 1537.436884] [ 497] 0 497 620 31 49152 0 0 atd [ 1537.444938] [ 500] 0 500 854 77 53248 0 0 crond [ 1537.453165] [ 503] 997 503 1470 160 49152 0 -900 dbus-daemon [ 1537.461908] [ 505] 0 505 633 24 40960 0 0 firmwared [ 1537.470491] [ 513] 0 513 2507 180 61440 0 0 ofonod [ 1537.478800] [ 514] 990 514 69640 137 81920 0 0 parsec [ 1537.487120] [ 533] 0 533 599 39 40960 0 0 syslogd [ 1537.495518] [ 534] 0 534 4546 148 65536 0 0 systemd-logind [ 1537.504560] [ 535] 0 535 690 24 45056 0 0 tee-supplicant [ 1537.513564] [ 540] 996 540 2769 168 61440 0 0 systemd-network [ 1537.522680] [ 566] 0 566 3878 228 77824 0 0 connmand [ 1537.531168] [ 645] 998 645 1538 133 57344 0 0 avahi-daemon [ 1537.540004] [ 646] 998 646 1461 64 57344 0 0 avahi-daemon [ 1537.548846] [ 648] 992 648 781 41 45056 0 0 rpc.statd [ 1537.557415] [ 650] 64371 650 590 23 45056 0 0 ninfod [ 1537.565754] [ 653] 61563 653 555 24 45056 0 0 rdisc [ 1537.573971] [ 655] 0 655 374569 2999 290816 0 -999 containerd [ 1537.582621] [ 658] 0 658 1311 20 49152 0 0 agetty [ 1537.590922] [ 663] 0 663 1529 97 49152 0 0 login [ 1537.599138] [ 666] 0 666 3430 202 69632 0 0 wpa_supplicant [ 1537.608147] [ 667] 0 667 2344 96 61440 0 0 systemd-userdbd [ 1537.617240] [ 677] 0 677 2964 314 65536 0 100 systemd [ 1537.625651] [ 679] 0 679 3720 646 73728 0 100 (sd-pam) [ 1537.634138] [ 687] 0 687 1289 403 45056 0 0 sh [ 1537.642108] [ 789] 0 789 970 93 45056 0 0 eth_test2.sh [ 1537.650955] [ 2355] 0 2355 2346 94 61440 0 0 systemd-userwor [ 1537.660046] [ 2356] 0 2356 2346 94 61440 0 0 systemd-userwor [ 1537.669137] [ 2358] 0 2358 2346 95 57344 0 0 systemd-userwor [ 1537.678258] [ 2379] 0 2379 970 93 45056 0 0 eth_test2.sh [ 1537.687098] oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null),cpuset=/,mems_allowed=0,global_oom,task_memcg=/user.slice/user-0.slice/user@0.service,tas0 [ 1537.703009] Out of memory: Killed process 679 ((sd-pam)) total-vm:14880kB, anon-rss:2584kB, file-rss:0kB, shmem-rss:0kB, UID:0 pgtables:72kB oom_score_ad0 [ 1553.246526] page_pool_release_retry() stalled pool shutdown 310 inflight 241 sec Fixes: 95698ff6177b ("net: fec: using page pool to manage RX buffers") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: shenwei wang <Shenwei.wang@nxp.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-21net: fix UaF in netns ops registration error pathPaolo Abeni1-1/+1
If net_assign_generic() fails, the current error path in ops_init() tries to clear the gen pointer slot. Anyway, in such error path, the gen pointer itself has not been modified yet, and the existing and accessed one is smaller than the accessed index, causing an out-of-bounds error: BUG: KASAN: slab-out-of-bounds in ops_init+0x2de/0x320 Write of size 8 at addr ffff888109124978 by task modprobe/1018 CPU: 2 PID: 1018 Comm: modprobe Not tainted 6.2.0-rc2.mptcp_ae5ac65fbed5+ #1641 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6a/0x9f print_address_description.constprop.0+0x86/0x2b5 print_report+0x11b/0x1fb kasan_report+0x87/0xc0 ops_init+0x2de/0x320 register_pernet_operations+0x2e4/0x750 register_pernet_subsys+0x24/0x40 tcf_register_action+0x9f/0x560 do_one_initcall+0xf9/0x570 do_init_module+0x190/0x650 load_module+0x1fa5/0x23c0 __do_sys_finit_module+0x10d/0x1b0 do_syscall_64+0x58/0x80 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f42518f778d Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d cb 56 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007fff96869688 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 00005568ef7f7c90 RCX: 00007f42518f778d RDX: 0000000000000000 RSI: 00005568ef41d796 RDI: 0000000000000003 RBP: 00005568ef41d796 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000 R13: 00005568ef7f7d30 R14: 0000000000040000 R15: 0000000000000000 </TASK> This change addresses the issue by skipping the gen pointer de-reference in the mentioned error-path. Found by code inspection and verified with explicit error injection on a kasan-enabled kernel. Fixes: d266935ac43d ("net: fix UAF issue in nfqnl_nf_hook_drop() when ops_init() failed") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/cec4e0f3bb2c77ac03a6154a8508d3930beb5f0f.1674154348.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-21net: ethernet: renesas: rswitch: Fix ethernet-ports handlingYoshihiro Shimoda2-9/+25
If one of ports in the ethernet-ports was disabled, this driver failed to probe all ports. So, fix it. Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20230120001959.1059850-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-21net: mana: Fix IRQ name - add PCI and queue numberHaiyang Zhang2-1/+11
The PCI and queue number info is missing in IRQ names. Add PCI and queue number to IRQ names, to allow CPU affinity tuning scripts to work. Cc: stable@vger.kernel.org Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/1674161950-19708-1-git-send-email-haiyangz@microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-21netlink: prevent potential spectre v1 gadgetsEric Dumazet1-0/+3
Most netlink attributes are parsed and validated from __nla_validate_parse() or validate_nla() u16 type = nla_type(nla); if (type == 0 || type > maxtype) { /* error or continue */ } @type is then used as an array index and can be used as a Spectre v1 gadget. array_index_nospec() can be used to prevent leaking content of kernel memory to malicious users. This should take care of vast majority of netlink uses, but an audit is needed to take care of others where validation is not yet centralized in core netlink functions. Fixes: bfa83a9e03cf ("[NETLINK]: Type-safe netlink messages/attributes interface") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230119110150.2678537-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-20Merge tag 'net-6.2-rc5-2' of ↵Linus Torvalds90-560/+804
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wireless, bluetooth, bpf and netfilter. Current release - regressions: - Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf", fix nsna_ping mode of team - wifi: mt76: fix bugs in Rx queue handling and DMA mapping - eth: mlx5: - add missing mutex_unlock in error reporter - protect global IPsec ASO with a lock Current release - new code bugs: - rxrpc: fix wrong error return in rxrpc_connect_call() Previous releases - regressions: - bluetooth: hci_sync: fix use of HCI_OP_LE_READ_BUFFER_SIZE_V2 - wifi: - mac80211: fix crashes on Rx due to incorrect initialization of rx->link and rx->link_sta - mac80211: fix bugs in iTXQ conversion - Tx stalls, incorrect aggregation handling, crashes - brcmfmac: fix regression for Broadcom PCIe wifi devices - rndis_wlan: prevent buffer overflow in rndis_query_oid - netfilter: conntrack: handle tcp challenge acks during connection reuse - sched: avoid grafting on htb_destroy_class_offload when destroying - virtio-net: correctly enable callback during start_xmit, fix stalls - tcp: avoid the lookup process failing to get sk in ehash table - ipa: disable ipa interrupt during suspend - eth: stmmac: enable all safety features by default Previous releases - always broken: - bpf: - fix pointer-leak due to insufficient speculative store bypass mitigation (Spectre v4) - skip task with pid=1 in send_signal_common() to avoid a splat - fix BPF program ID information in BPF_AUDIT_UNLOAD as well as PERF_BPF_EVENT_PROG_UNLOAD events - fix potential deadlock in htab_lock_bucket from same bucket index but different map_locked index - bluetooth: - fix a buffer overflow in mgmt_mesh_add() - hci_qca: fix driver shutdown on closed serdev - ISO: fix possible circular locking dependency - CIS: hci_event: fix invalid wait context - wifi: brcmfmac: fixes for survey dump handling - mptcp: explicitly specify sock family at subflow creation time - netfilter: nft_payload: incorrect arithmetics when fetching VLAN header bits - tcp: fix rate_app_limited to default to 1 - l2tp: close all race conditions in l2tp_tunnel_register() - eth: mlx5: fixes for QoS config and eswitch configuration - eth: enetc: avoid deadlock in enetc_tx_onestep_tstamp() - eth: stmmac: fix invalid call to mdiobus_get_phy() Misc: - ethtool: add netlink attr in rss get reply only if the value is not empty" * tag 'net-6.2-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits) Revert "Merge branch 'octeontx2-af-CPT'" tcp: fix rate_app_limited to default to 1 bnxt: Do not read past the end of test names net: stmmac: enable all safety features by default octeontx2-af: add mbox to return CPT_AF_FLT_INT info octeontx2-af: update cpt lf alloc mailbox octeontx2-af: restore rxc conf after teardown sequence octeontx2-af: optimize cpt pf identification octeontx2-af: modify FLR sequence for CPT octeontx2-af: add mbox for CPT LF reset octeontx2-af: recover CPT engine when it gets fault net: dsa: microchip: ksz9477: port map correction in ALU table entry register selftests/net: toeplitz: fix race on tpacket_v3 block close net/ulp: use consistent error code when blocking ULP octeontx2-pf: Fix the use of GFP_KERNEL in atomic context on rt tcp: avoid the lookup process failing to get sk in ehash table Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf" MAINTAINERS: add networking entries for Willem net: sched: gred: prevent races when adding offloads to stats l2tp: prevent lockdep issue in l2tp_tunnel_register() ...
2023-01-20iavf: schedule watchdog immediately when changing primary MACStefan Assmann1-1/+1
iavf_replace_primary_mac() utilizes queue_work() to schedule the watchdog task but that only ensures that the watchdog task is queued to run. To make sure the watchdog is executed asap use mod_delayed_work(). Without this patch it may take up to 2s until the watchdog task gets executed, which may cause long delays when setting the MAC address. Fixes: a3e839d539e0 ("iavf: Add usage of new virtchnl format to set default MAC") Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-20iavf: Move netdev_update_features() into watchdog taskMarcin Szycik2-18/+17
Remove netdev_update_features() from iavf_adminq_task(), as it can cause deadlocks due to needing rtnl_lock. Instead use the IAVF_FLAG_SETUP_NETDEV_FEATURES flag to indicate that netdev features need to be updated in the watchdog task. iavf_set_vlan_offload_features() and iavf_set_queue_vlan_tag_loc() can be called directly from iavf_virtchnl_completion(). Suggested-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-20iavf: fix temporary deadlock and failure to set MAC addressMichal Schmidt4-51/+49
We are seeing an issue where setting the MAC address on iavf fails with EAGAIN after the 2.5s timeout expires in iavf_set_mac(). There is the following deadlock scenario: iavf_set_mac(), holding rtnl_lock, waits on: iavf_watchdog_task (within iavf_wq) to send a message to the PF, and iavf_adminq_task (within iavf_wq) to receive a response from the PF. In this adapter state (>=__IAVF_DOWN), these tasks do not need to take rtnl_lock, but iavf_wq is a global single-threaded workqueue, so they may get stuck waiting for another adapter's iavf_watchdog_task to run iavf_init_config_adapter(), which does take rtnl_lock. The deadlock resolves itself by the timeout in iavf_set_mac(), which results in EAGAIN returned to userspace. Let's break the deadlock loop by changing iavf_wq into a per-adapter workqueue, so that one adapter's tasks are not blocked by another's. Fixes: 35a2443d0910 ("iavf: Add waiting for response from PF in set mac") Co-developed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-20Revert "Merge branch 'octeontx2-af-CPT'"Jakub Kicinski5-277/+87
This reverts commit b4fbf0b27fa9dd2594b3371532341bd4636a00f9, reversing changes made to 6c977c5c2e4c5d8ad1b604724cc344e38f96fe9b. This seems like net-next material. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-20tcp: fix rate_app_limited to default to 1David Morley1-0/+2
The initial default value of 0 for tp->rate_app_limited was incorrect, since a flow is indeed application-limited until it first sends data. Fixing the default to be 1 is generally correct but also specifically will help user-space applications avoid using the initial tcpi_delivery_rate value of 0 that persists until the connection has some non-zero bandwidth sample. Fixes: eb8329e0a04d ("tcp: export data delivery rate") Suggested-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David Morley <morleyd@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Tested-by: David Morley <morleyd@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20bnxt: Do not read past the end of test namesKees Cook2-17/+5
Test names were being concatenated based on a offset beyond the end of the first name, which tripped the buffer overflow detection logic: detected buffer overflow in strnlen [...] Call Trace: bnxt_ethtool_init.cold+0x18/0x18 Refactor struct hwrm_selftest_qlist_output to use an actual array, and adjust the concatenation to use snprintf() rather than a series of strncat() calls. Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com> Link: https://lore.kernel.org/lkml/Y8F%2F1w1AZTvLglFX@x1-carbon/ Tested-by: Niklas Cassel <Niklas.Cassel@wdc.com> Fixes: eb51365846bc ("bnxt_en: Add basic ethtool -t selftest support.") Cc: Michael Chan <michael.chan@broadcom.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20net: stmmac: enable all safety features by defaultAndrew Halaney1-0/+14
In the original implementation of dwmac5 commit 8bf993a5877e ("net: stmmac: Add support for DWMAC5 and implement Safety Features") all safety features were enabled by default. Later it seems some implementations didn't have support for all the features, so in commit 5ac712dcdfef ("net: stmmac: enable platform specific safety features") the safety_feat_cfg structure was added to the callback and defined for some platforms to selectively enable these safety features. The problem is that only certain platforms were given that software support. If the automotive safety package bit is set in the hardware features register the safety feature callback is called for the platform, and for platforms that didn't get a safety_feat_cfg defined this results in the following NULL pointer dereference: [ 7.933303] Call trace: [ 7.935812] dwmac5_safety_feat_config+0x20/0x170 [stmmac] [ 7.941455] __stmmac_open+0x16c/0x474 [stmmac] [ 7.946117] stmmac_open+0x38/0x70 [stmmac] [ 7.950414] __dev_open+0x100/0x1dc [ 7.954006] __dev_change_flags+0x18c/0x204 [ 7.958297] dev_change_flags+0x24/0x6c [ 7.962237] do_setlink+0x2b8/0xfa4 [ 7.965827] __rtnl_newlink+0x4ec/0x840 [ 7.969766] rtnl_newlink+0x50/0x80 [ 7.973353] rtnetlink_rcv_msg+0x12c/0x374 [ 7.977557] netlink_rcv_skb+0x5c/0x130 [ 7.981500] rtnetlink_rcv+0x18/0x2c [ 7.985172] netlink_unicast+0x2e8/0x340 [ 7.989197] netlink_sendmsg+0x1a8/0x420 [ 7.993222] ____sys_sendmsg+0x218/0x280 [ 7.997249] ___sys_sendmsg+0xac/0x100 [ 8.001103] __sys_sendmsg+0x84/0xe0 [ 8.004776] __arm64_sys_sendmsg+0x24/0x30 [ 8.008983] invoke_syscall+0x48/0x114 [ 8.012840] el0_svc_common.constprop.0+0xcc/0xec [ 8.017665] do_el0_svc+0x38/0xb0 [ 8.021071] el0_svc+0x2c/0x84 [ 8.024212] el0t_64_sync_handler+0xf4/0x120 [ 8.028598] el0t_64_sync+0x190/0x194 Go back to the original behavior, if the automotive safety package is found to be supported in hardware enable all the features unless safety_feat_cfg is passed in saying this particular platform only supports a subset of the features. Fixes: 5ac712dcdfef ("net: stmmac: enable platform specific safety features") Reported-by: Ning Cai <ncai@quicinc.com> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20Merge branch 'octeontx2-af-CPT'David S. Miller5-87/+277
Srujana Challa says: ==================== octeontx2-af: Miscellaneous changes for CPT This patchset consists of miscellaneous changes for CPT. - Adds a new mailbox to reset the requested CPT LF. - Modify FLR sequence as per HW team suggested. - Adds support to recover CPT engines when they gets fault. - Updates CPT inbound inline IPsec configuration mailbox, as per new generation of the OcteonTX2 chips. - Adds a new mailbox to return CPT FLT Interrupt info. --- v2: - Addressed a review comment. v1: - Dropped patch "octeontx2-af: Fix interrupt name strings completely" to submit to net. --- ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20octeontx2-af: add mbox to return CPT_AF_FLT_INT infoSrujana Challa3-0/+56
CPT HW would trigger the CPT AF FLT interrupt when CPT engines hits some uncorrectable errors and AF is the one which receives the interrupt and recovers the engines. This patch adds a mailbox for CPT VFs to request for CPT faulted and recovered engines info. Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20octeontx2-af: update cpt lf alloc mailboxSrujana Challa2-3/+9
The CN10K CPT coprocessor contains a context processor to accelerate updates to the IPsec security association contexts. The context processor contains a context cache. This patch updates CPT LF ALLOC mailbox to config ctx_ilen requested by VFs. CPT_LF_ALLOC:ctx_ilen is the size of initial context fetch. Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20octeontx2-af: restore rxc conf after teardown sequenceNithin Dabilpuram1-4/+18
CN10K CPT coprocessor includes a component named RXC which is responsible for reassembly of inner IP packets. RXC has the feature to evict oldest entries based on age/threshold. The age/threshold is being set to minimum values to evict all entries at the time of teardown. This patch adds code to restore timeout and threshold config after teardown sequence is complete as it is global config. Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20octeontx2-af: optimize cpt pf identificationSrujana Challa3-3/+20
Optimize CPT PF identification in mbox handling for faster mbox response by doing it at AF driver probe instead of every mbox message. Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20octeontx2-af: modify FLR sequence for CPTSrujana Challa3-47/+53
On OcteonTX2 platform CPT instruction enqueue is only possible via LMTST operations. The existing FLR sequence mentioned in HRM requires a dummy LMTST to CPT but LMTST can't be submitted from AF driver. So, HW team provided a new sequence to avoid dummy LMTST. This patch adds code for the same. Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20octeontx2-af: add mbox for CPT LF resetSrujana Challa2-0/+41
On OcteonTX2 SoC, the admin function (AF) is the only one with all priviliges to configure HW and alloc resources, PFs and it's VFs have to request AF via mailbox for all their needs. This patch adds a new mailbox for CPT VFs to request for CPT LF reset. Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20octeontx2-af: recover CPT engine when it gets faultSrujana Challa1-30/+80
When CPT engine has uncorrectable errors, it will get halted and must be disabled and re-enabled. This patch adds code for the same. Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20Merge tag 'perf-tools-fixes-for-v6.2-3-2023-01-19' of ↵Linus Torvalds9-7/+54
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Prevent reading into undefined memory in the expression lexer, accounting for a trailer backslash followed by the null byte. - Fix file mode when copying files to the build id cache, the problem happens when the cache directory is in a different file system than the file being cached, otherwise the mode was preserved as only a hard link would be done to save space. - Fix a related build-id 'perf test' entry that checked that permission when caching PE (Portable Executable) files, used when profiling Windows executables under wine. - Sync the tools/ copies of kvm headers, build_bug.h, socket.h and arm64's cputype.h with the kernel sources. * tag 'perf-tools-fixes-for-v6.2-3-2023-01-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf test build-id: Fix test check for PE file perf buildid-cache: Fix the file mode with copyfile() while adding file to build-id cache perf expr: Prevent normalize() from reading into undefined memory in the expression lexer tools headers: Syncronize linux/build_bug.h with the kernel sources perf beauty: Update copy of linux/socket.h with the kernel sources tools headers arm64: Sync arm64's cputype.h with the kernel sources tools kvm headers arm64: Update KVM header from the kernel sources tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources tools headers UAPI: Sync linux/kvm.h with the kernel sources
2023-01-19Merge tag 'printk-for-6.2-rc5' of ↵Linus Torvalds3-15/+12
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk fixes from Petr Mladek: - Prevent a potential deadlock when configuring kgdb console - Fix a kernel doc warning * tag 'printk-for-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: kernel/printk/printk.c: Fix W=1 kernel-doc warning tty: serial: kgdboc: fix mutex locking order for configure_kgdboc()
2023-01-19Merge tag 's390-6.2-3' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 build fix from Heiko Carstens: - Workaround invalid gcc-11 out of bounds read warning caused by s390's S390_lowcore definition. This happens only with gcc 11.1.0 and 11.2.0. The code which causes this warning will be gone with the next merge window. Therefore just replace the memcpy() with a for loop to get rid of the warning. * tag 's390-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: workaround invalid gcc-11 out of bounds read warning
2023-01-19Merge tag 'slab-for-6.2-rc5' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab Pull slab fix from Vlastimil Babka: "Just a single fix, since the lkp report originally for a slub-tiny commit ended up being a gcov/compiler bug: - periodically resched in SLAB's drain_freelist(), by David Rientjes" * tag 'slab-for-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: mm, slab: periodically resched in drain_freelist()
2023-01-19Merge tag 'zonefs-6.2-rc5' of ↵Linus Torvalds1-0/+22
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs Pull zonefs fix from Damien Le Moal: - A single patch to fix sync write operations to detect and handle errors due to external zone corruptions resulting in writes at invalid location, from me. * tag 'zonefs-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: Detect append writes at invalid locations
2023-01-19net: dsa: microchip: ksz9477: port map correction in ALU table entry registerRakesh Sankaranarayanan1-2/+2
ALU table entry 2 register in KSZ9477 have bit positions reserved for forwarding port map. This field is referred in ksz9477_fdb_del() for clearing forward port map and alu table. But current fdb_del refer ALU table entry 3 register for accessing forward port map. Update ksz9477_fdb_del() to get forward port map from correct alu table entry register. With this bug, issue can be observed while deleting static MAC entries. Delete any specific MAC entry using "bridge fdb del" command. This should clear all the specified MAC entries. But it is observed that entries with self static alone are retained. Tested on LAN9370 EVB since ksz9477_fdb_del() is used common across LAN937x and KSZ series. Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Rakesh Sankaranarayanan <rakesh.sankaranarayanan@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20230118174735.702377-1-rakesh.sankaranarayanan@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-19selftests/net: toeplitz: fix race on tpacket_v3 block closeWillem de Bruijn1-5/+7
Avoid race between process wakeup and tpacket_v3 block timeout. The test waits for cfg_timeout_msec for packets to arrive. Packets arrive in tpacket_v3 rings, which pass packets ("frames") to the process in batches ("blocks"). The sk waits for req3.tp_retire_blk_tov msec to release a block. Set the block timeout lower than the process waiting time, else the process may find that no block has been released by the time it scans the socket list. Convert to a ring of more than one, smaller, blocks with shorter timeouts. Blocks must be page aligned, so >= 64KB. Fixes: 5ebfb4cc3048 ("selftests/net: toeplitz test") Signed-off-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20230118151847.4124260-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-19net/ulp: use consistent error code when blocking ULPPaolo Abeni1-1/+1
The referenced commit changed the error code returned by the kernel when preventing a non-established socket from attaching the ktls ULP. Before to such a commit, the user-space got ENOTCONN instead of EINVAL. The existing self-tests depend on such error code, and the change caused a failure: RUN global.non_established ... tls.c:1673:non_established:Expected errno (22) == ENOTCONN (107) non_established: Test failed at step #3 FAIL global.non_established In the unlikely event existing applications do the same, address the issue by restoring the prior error code in the above scenario. Note that the only other ULP performing similar checks at init time - smc_ulp_ops - also fails with ENOTCONN when trying to attach the ULP to a non-established socket. Reported-by: Sabrina Dubroca <sd@queasysnail.net> Fixes: 2c02d41d71f9 ("net/ulp: prevent ULP without clone op from entering the LISTEN status") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/7bb199e7a93317fb6f8bf8b9b2dc71c18f337cde.1674042685.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-19Merge tag 'mlx5-fixes-2023-01-18' of ↵Paolo Abeni12-40/+27
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2023-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net: mlx5: eliminate anonymous module_init & module_exit net/mlx5: E-switch, Fix switchdev mode after devlink reload net/mlx5e: Protect global IPsec ASO net/mlx5e: Remove optimization which prevented update of ESN state net/mlx5e: Set decap action based on attr for sample net/mlx5e: QoS, Fix wrongfully setting parent_element_id on MODIFY_SCHEDULING_ELEMENT net/mlx5: E-switch, Fix setting of reserved fields on MODIFY_SCHEDULING_ELEMENT net/mlx5e: Remove redundant xsk pointer check in mlx5e_mpwrq_validate_xsk net/mlx5e: Avoid false lock dependency warning on tc_ht even more net/mlx5: fix missing mutex_unlock in mlx5_fw_fatal_reporter_err_work() ==================== Link: https://lore.kernel.org/r/ Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-23 23:41:50 +0300