summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-02-03mt76: mt7915: fix possible memory leak in mt7915_mcu_add_staLorenzo Bianconi1-2/+6
Free allocated skb in mt7915_mcu_add_sta routine in case of failures. Fixes: 89bbd3730f382 ("mt76: mt7915: rework starec TLV tags") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: stop the radar detector after leaving dfs channelXing Song2-2/+4
The radar detctor is used for dfs channel. So it will start after switching to dfs channel and will stop after leaving. The TX will be blocked if radar detctor isn't stopped in non-dfs channel. This patch resets the dfs state to indicate the radar detector needs to be stopped. Signed-off-by: Xing Song <xing.song@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7615: check sta_rates pointer in mt7615_sta_rate_tbl_updateLorenzo Bianconi1-0/+3
Check sta_rates pointer value in mt7615_sta_rate_tbl_update routine since minstrel_ht_update_rates can fail allocating rates array. Fixes: 04b8e65922f63 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7603: check sta_rates pointer in mt7603_sta_rate_tbl_updateLorenzo Bianconi1-0/+3
Check sta_rates pointer value in mt7603_sta_rate_tbl_update routine since minstrel_ht_update_rates can fail allocating rates array. Fixes: c8846e1015022 ("mt76: add driver for MT7603E and MT7628/7688") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7663s: flush runtime-pm queue after waking up the deviceLorenzo Bianconi1-0/+1
Add missing mt76_connac_pm_dequeue_skbs routine waking up mt7663s device from runtime-pm sleep state. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7615: add support for LG LGSBWAC02 (MT7663BUN)Piotr Dymacz1-0/+1
The LG LGSBWAC02 (FCC ID: BEJLGSBWAC02) is a combo Wi-Fi/BT module which can be found in several different LG TV models. This module is based on already supported MediaTek MT7663U series. Device from /sys/kernel/debug/usb/devices: T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=043e ProdID=310c Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=mt7663u E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms And dmesg: usbcore: registered new interface driver mt7663u mt7663u 1-1.4:1.2: N9 Firmware Version: 3.1.1, Build Time: 20200604161656 mt7663u 1-1.4:1.2: Region number: 0x4 mt7663u 1-1.4:1.2: Parsing tailer Region: 0 mt7663u 1-1.4:1.2: Region 0, override_addr = 0x00118000 mt7663u 1-1.4:1.2: Parsing tailer Region: 1 mt7663u 1-1.4:1.2: Parsing tailer Region: 2 mt7663u 1-1.4:1.2: Parsing tailer Region: 3 mt7663u 1-1.4:1.2: override_addr = 0x00118000, option = 3 Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7921: remove duplicated code in mt7921_mac_decode_he_radiotapLorenzo Bianconi1-1/+0
Remove duplicated DATA4_SU_MU_SPTL_REUSE flag configuration in mt7921_mac_decode_he_radiotap routine. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: add missing DATA4_TB_SPTL_REUSE1 to mt7915_mac_decode_he_radiotapLorenzo Bianconi1-1/+2
Add missing DATA4_TB_SPTL_REUSE1 he radiotap flag to mt7915_mac_decode_he_radiotap routine. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: connac: move mt76_connac_lmac_mapping in mt76-connac moduleLorenzo Bianconi8-21/+13
mt76_connac_lmac_mapping is shared between mt7921 and mt7915 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03dt-bindings:net:wireless:mediatek,mt76: add disable-radar-offchanLorenzo Bianconi1-0/+9
Add the capability to disable/enable radar/CAC detection running on a dedicated offchannel chain available on some hw. Offchannel radar/CAC detection allows to avoid CAC downtime switching on a different channel during CAC detection on the selected radar channel. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: enable radar background detectionLorenzo Bianconi1-0/+7
Notify userland the hw supports background radar/CAC detection. Tested-by: Owen Peng <owen.peng@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: report radar pattern if detected by rdd2Lorenzo Bianconi1-1/+6
Report radar pattern to mac80211 if detected by the offchannel chain. Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Tested-by: Owen Peng <owen.peng@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: introduce rdd_monitor debugfs nodeLorenzo Bianconi1-0/+49
Introduce rdd_monitor debugfs node in order to dump rdd2 configuration. Tested-by: Owen Peng <owen.peng@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: enable radar trigger on rdd2Lorenzo Bianconi1-1/+5
Enable radar trigger for rdd2 in mt7915_radar_trigger. Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Tested-by: Owen Peng <owen.peng@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: introduce mt7915_set_radar_background routineLorenzo Bianconi6-0/+177
Introduce mt7915_mcu_rdd_background_enable and mt7915_mcu_background_chain_ctrl routines to configure rx dfs dedicated chain. This is a preliminary patch to add zero-wait dfs support performing CAC detection on rdd2. Tested-by: Owen Peng <owen.peng@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: set bssinfo/starec command when adding interfaceShayne Chen1-0/+3
bssinfo/starec disabled commands are sent during removing interface. However, if we don't set corresponding enabled commands before removing interface, the fw may enter an exception state due to some NULL structs. For example, the following commands can cause fw timeout in our newer chips: ifconfig wlan0/mon0 up ifconfig wlan0/mon0 down Fix this by setting enabled commands once interface added. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7921: toggle runtime-pm adding a monitor vifLorenzo Bianconi5-25/+45
Toggle runtime-pm and deep-sleep configuration adding/removing a montior vif in order to forward all tx/rx frames to mac80211. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Tested-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7921: fix endianness issues in mt7921_mcu_set_tx()Lorenzo Bianconi1-5/+3
Fix the following sparse warning in mt7921_mcu_set_tx routine: drivers/net/wireless/mediatek/mt76/mt7921/mcu.c:792:25: warning: incorrect type in assignment (different base types) drivers/net/wireless/mediatek/mt76/mt7921/mcu.c:792:25: expected restricted __le16 [usertype] aifs drivers/net/wireless/mediatek/mt76/mt7921/mcu.c:792:25: got unsigned char [usertype] aifs drivers/net/wireless/mediatek/mt76/mt7921/mcu.c:798:35: warning: incorrect type in assignment (different base types) drivers/net/wireless/mediatek/mt76/mt7921/mcu.c:798:35: expected restricted __le16 [usertype] cw_min Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: sdio: disable interrupt in mt76s_sdio_irqSean Wang1-0/+1
It is unnecessary to keep the interrupt enabled in mt76s_sdio_irq because the driver is already aware of the interrupt, schedules the mt76s_txrx_worker to handle the corresponding actions, and eventually, the interrupt would be enabled again when mt76s_txrx_worker finishes its work. So we can safely disable the interrupt in mt76s_sdio_irq as soon as possible to increase the CPU productivity by dropping the redundant interrupt triggers. Note that sdio lock acquired/released would be handled in sdio_irq_work at mmc driver so we don't take care in mt76s_sdio_irq at function driver. Co-developed-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Leon Yen <leon.yen@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7921: fix crash when startup fails.Ben Greear1-0/+1
If the nic fails to start, it is possible that the reset_work has already been scheduled. Ensure the work item is canceled so we do not have use-after-free crash in case cleanup is called before the work item is executed. This fixes crash on my x86_64 apu2 when mt7921k radio fails to work. Radio still fails, but OS does not crash. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7921e: fix possible probe failure after rebootSean Wang4-123/+139
It doesn't guarantee the mt7921e gets started with ASPM L0 after each machine reboot on every platform. If mt7921e gets started with not ASPM L0, it would be possible that the driver encounters time to time failure in mt7921_pci_probe, like a weird chip identifier is read [ 215.514503] mt7921e 0000:05:00.0: ASIC revision: feed0000 [ 216.604741] mt7921e: probe of 0000:05:00.0 failed with error -110 or failing to init hardware because the driver is not allowed to access the register until the device is in ASPM L0 state. So, we call __mt7921e_mcu_drv_pmctrl in early mt7921_pci_probe to force the device to bring back to the L0 state for we can safely access registers in any case. In the patch, we move all functions from dma.c to pci.c and register mt76 bus operation earilier, that is the __mt7921e_mcu_drv_pmctrl depends on. Fixes: bf3747ae2e25 ("mt76: mt7921: enable aspm by default") Reported-by: Kai-Chuan Hsieh <kaichuan.hsieh@canonical.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7921s: fix mt7921s_mcu_[fw|drv]_pmctrlLeon Yen2-0/+40
According to the firmware behavior (even the oldest one in linux-firmware) If the firmware is downloaded, MT7921S must rely on the additional mailbox mechanism that resides in firmware to check if the device is the right state for mt7921s_mcu_[fw|drv]_pmctrl. Otherwise, we still apply the old way for that. That is a necessary patch before we enable runtime pm for mt7921s as default. Fixes: 48fab5bbef40 ("mt76: mt7921: introduce mt7921s support") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7921: fix ht mcs in mt7921_mac_add_txs_skb()Peter Chiu1-1/+0
The mcs value of HT mode reported by mt7921_mac_add_txs_skb() has already been converted to the expected format. Fixes: 970ab80ef9f63 ("mt76: mt7921: report tx rate directly from tx status") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: fix ht mcs in mt7915_mac_add_txs_skb()Peter Chiu1-1/+0
The mcs value of HT mode reported by mt7915_mac_add_txs_skb() has already been converted to the expected format. Fixes: 9908d98ae72cd ("mt76: mt7915: report tx rate directly from tx status") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7615: fix a leftover race in runtime-pmLorenzo Bianconi1-0/+8
Fix a possible race in mt7615_pm_power_save_work() if rx/tx napi schedules ps_work and we are currently accessing device register on a different cpu. Fixes: db928f1ab9789 ("mt76: mt7663: rely on mt76_connac_pm_ref/mt76_connac_pm_unref in tx/rx napi") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7921: fix a leftover race in runtime-pmLorenzo Bianconi1-0/+8
Fix a possible race in mt7921_pm_power_save_work() if rx/tx napi schedules ps_work and we are currently accessing device register on a different cpu. Fixes: 1d8efc741df8 ("mt76: mt7921: introduce Runtime PM support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7921: do not always disable fw runtime-pmLorenzo Bianconi1-2/+1
After commit 'd430dffbe9dd ("mt76: mt7921: fix a possible race enabling/disabling runtime-pm")', runtime-pm is always disabled in the fw even if the user requests to enable it toggling debugfs node since mt7921_pm_interface_iter routine will use pm->enable to configure the fw. Fix the issue moving enable variable configuration before running mt7921_pm_interface_iter routine. Fixes: d430dffbe9dd ("mt76: mt7921: fix a possible race enabling/disabling runtime-pm") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: add support for passing chip/firmware debug data to user spaceFelix Fietkau8-4/+163
This can be used to assist in debugging driver or firmware tx/rx issues. The data is streamed to user space using a relay file in debugfs Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7615e: process txfree and txstatus without allocating skbsLorenzo Bianconi3-5/+35
Similar to mt7915 driver, process txfree and txstatus without allocating skbs in order to reduce pressure on the memory allocator Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: update bss_info with cipher after setting the group keyFelix Fietkau1-0/+6
In some cases, the WA firmware needs to know if encryption is used, in order to set the protection bit of packets Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7615: update bss_info with cipher after setting the group keyFelix Fietkau1-0/+6
In some cases, the WA firmware needs to know if encryption is used, in order to set the protection bit of packets Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: connac: add support for passing the cipher field in bss_infoFelix Fietkau2-0/+2
Initialize it from a field in struct mt76_vif Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7921e: process txfree and txstatus without allocating skbsLorenzo Bianconi4-6/+33
Similar to mt7915 driver, process txfree and txstatus without allocating skbs in order to reduce pressure on the memory allocator Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7615: fix a possible race enabling/disabling runtime-pmLorenzo Bianconi1-4/+11
Similar to mt7921 driver, fix a possible race enabling/disabling runtime-pm between mt7615_pm_set() and mt7615_poll_rx(). mt7615_pm_wake_work() always schedules rx-napi callback and it will trigger mt7615_pm_power_save_work routine putting the chip in low-power state even if we are disabling runtime-pm deferring the actual chip wake at the next access. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7921: set EDCA parameters with the MCU CE commandSean Wang2-28/+22
The command MCU_EXT_CMD_EDCA_UPDATE is not fully supported by the MT7921 firmware, so we apply CE command MCU_CE_CMD_SET_EDCA_PARAMS instead which is supported even in the oldest firmware to properly set up EDCA parameters for each AC. Fixes: 1c099ab44727 ("mt76: mt7921: add MCU support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt76_connac: fix MCU_CE_CMD_SET_ROC definition errorSean Wang1-1/+1
Fixed an MCU_CE_CMD_SET_ROC definition error that occurred from a previous refactor work. Fixes: d0e274af2f2e4 ("mt76: mt76_connac: create mcu library") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7921: forbid the doze mode when coredump is in progressYN Chen1-1/+2
We forbid the doze mode while the collecting core dump is going because that doesn't make sense and the firmware possibly stays in the abnormal state where cannot handle the doze request from the driver anymore until the WiFi reset procedure is completed. Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7921e: make dev->fw_assert usage consistentSean Wang1-0/+1
Clear dev->fw_assert flag in mt7921s to be consistent with mt7921s driver. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: connac: move mt76_connac_mcu_rdd_cmd in mt76-connac moduleLorenzo Bianconi9-66/+52
Move mt76_connac_mcu_rdd_cmd routine in mt76-connac module and remove duplicated code. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: rely on mt76_connac_mcu_set_rts_threshLorenzo Bianconi3-23/+3
Rely on mt76_connac_mcu_set_rts_thresh routine in mt7915 driver and remove duplicated code. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: connac: move mt76_connac_mcu_gen_dl_mode in mt76-connac moduleLorenzo Bianconi4-96/+46
Move mt76_connac_mcu_gen_dl_mode utility routine in mt76_connac_mcu.h since it is shared by all drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: rely on mt76_connac_mcu_init_downloadLorenzo Bianconi2-27/+6
Rely on mt76_connac_mcu_init_download routine in mt7915 driver and remove duplicated code. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: rely on mt76_connac_mcu_patch_sem_ctrl/mt76_connac_mcu_start_patchLorenzo Bianconi1-28/+3
Rely on mt76_connac_mcu_patch_sem_ctrl/mt76_connac_mcu_start_patch routine in mt7915 driver and remove duplicated code. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: connac: move mt76_connac_mcu_restart in common moduleLorenzo Bianconi6-30/+17
Move mt76_connac_mcu_restart routine in mt76-connac since it is shared between mt7921 and mt7915. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: rely on mt76_connac_mcu_start_firmwareLorenzo Bianconi1-16/+1
Rely on mt76_connac_mcu_start_firmware and remove duplicated code. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7921: get rid of mt7921_mcu_get_eepromLorenzo Bianconi2-25/+0
Remove mt7921_mcu_get_eeprom since it is no longer used. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: connac: move mt76_connac_mcu_set_pm in connac moduleLorenzo Bianconi6-62/+38
Move mt76_connac_mcu_set_pm utility routine in connac module since it is shared between mt7615 and mt7915 drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: connac: introduce is_connac_v1 utility routineLorenzo Bianconi4-25/+29
Introduce is_connac_v1 inline utility routine to check if the device is generation v1. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: connac: move mt76_connac_mcu_wtbl_update_hdr_trans in connac moduleLorenzo Bianconi6-42/+25
Move mt76_connac_mcu_wtbl_update_hdr_trans routine in mt76-connac module since it is shared between mt7915 and mt7615 drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: rely on mt76_connac_mcu_wtbl_hdr_trans_tlvLorenzo Bianconi2-34/+10
Rely on mt76_connac_mcu_wtbl_hdr_trans_tlv routine and remove duplicated code. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 09:57:12 +0300