| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The newer firmware, lik RTL8852C version 0.27.111.0, will notify driver
report of TAS (Time Averaged SAR) power by new C2H events. This is to
assist in higher accurate calculation of TAS.
For now, driver doesn't use the report yet, so add a dummy handler to
avoid it throws info like:
rtw89_8852ce 0000:03:00.0: c2h class 9 func 6 not support
Also add "MAC" and "PHY" to the message to disambiguate the source of
C2H event.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241209042127.21424-1-pkshih@realtek.com
|
|
_dpk_dgain_read()
The return value of _dpk_dgain_read() is not used afterward, so remove
it safely.
Addresses-Coverity-ID: 1504753 ("Unused value")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241209042020.21290-2-pkshih@realtek.com
|
|
_rx_dck_channel_calc()
The channel is not possibly 0, so original code is fine. Still want to
avoid Coverity warning, so ensure -32 offset for the channel number which
is larger than 125 only. Actually, don't change logic at all.
Addresses-Coverity-ID: 1628150 ("Overflowed constant")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241209042020.21290-1-pkshih@realtek.com
|
|
At probe error path, the firmware loading work may have already been
queued. In such a case, it will try to access memory allocated by the probe
function, which is about to be released. In such paths, wait for the
firmware worker to finish before releasing memory.
Fixes: 3d86b93064c7 ("rtlwifi: Fix PCI probe error path orphaned memory")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241206173713.3222187-5-cascardo@igalia.com
|
|
Deinitialize at reverse order when probe fails.
When init_sw_vars fails, rtl_deinit_core should not be called, specially
now that it destroys the rtl_wq workqueue.
And call rtl_pci_deinit and deinit_sw_vars, otherwise, memory will be
leaked.
Remove pci_set_drvdata call as it will already be cleaned up by the core
driver code and could lead to memory leaks too. cf. commit 8d450935ae7f
("wireless: rtlwifi: remove unnecessary pci_set_drvdata()") and
commit 3d86b93064c7 ("rtlwifi: Fix PCI probe error path orphaned memory").
Fixes: 0c8173385e54 ("rtl8192ce: Add new driver")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241206173713.3222187-4-cascardo@igalia.com
|
|
rtl_wq is allocated at rtl_init_core, so it makes more sense to destroy it
at rtl_deinit_core. In the case of USB, where _rtl_usb_init does not
require anything to be undone, that is fine. But for PCI, rtl_pci_init,
which is called after rtl_init_core, needs to deallocate data, but only if
it has been called.
That means that destroying the workqueue needs to be done whether
rtl_pci_init has been called or not. And since rtl_pci_deinit was doing it,
it has to be moved out of there.
It makes more sense to move it to rtl_deinit_core and have it done in both
cases, USB and PCI.
Since this is a requirement for a followup memory leak fix, mark this as
fixing such memory leak.
Fixes: 0c8173385e54 ("rtl8192ce: Add new driver")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241206173713.3222187-3-cascardo@igalia.com
|
|
Commit 2461c7d60f9f ("rtlwifi: Update header file") introduced a global
list of private data structures.
Later on, commit 26634c4b1868 ("rtlwifi Modify existing bits to match
vendor version 2013.02.07") started adding the private data to that list at
probe time and added a hook, check_buddy_priv to find the private data from
a similar device.
However, that function was never used.
Besides, though there is a lock for that list, it is never used. And when
the probe fails, the private data is never removed from the list. This
would cause a second probe to access freed memory.
Remove the unused hook, structures and members, which will prevent the
potential race condition on the list and its corruption during a second
probe when probe fails.
Fixes: 26634c4b1868 ("rtlwifi Modify existing bits to match vendor version 2013.02.07")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241206173713.3222187-2-cascardo@igalia.com
|
|
The RFK pre-notify H2C command is to tell firmware the channels driver is
using. Since the format is changed after 0.35.49.0, update it accordingly.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241206055716.18598-8-pkshih@realtek.com
|
|
Sync Realtek Channel Plan R68 and Realtek Regulatory R51.
Configure 6 GHz field of Realtek regd for the following countries.
BO, DO, EG, LS, MZ, NG, OM, ZW, PK, PH, TH, KM, CG, CD,
GE, GI, GU, LR, MH, FM, MP, PW, MF, SX, SZ, TZ, VI
Besides, add entries for the following countries.
CU, SY, SD
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241206055716.18598-7-pkshih@realtek.com
|
|
Since hardware only has single one register for HE-LTF setting,
to prevent interoperability issues, 8852CE disables ER SU when
the AP can handle SU/MU with 4x HE-LTF and 0.8 GI, but does
not support ER SU with the same settings.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241206055716.18598-6-pkshih@realtek.com
|
|
Given the performance trade-off associated with firmware training
HE GI/LTF, especially in high attenuation environments, we have
decided to utilize a constant value instead.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241206055716.18598-5-pkshih@realtek.com
|
|
before/after PS
For MLO supported IC, send H2C command to firmware before PS with link
information for each PHY for MLO to work properly. And re-init hardware
settings regarding to RX descriptor information after PS.
Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241206055716.18598-4-pkshih@realtek.com
|
|
In PS mode, firmware needs hardware parameters related to channel info
to configure hardware itself. Before entering PS, driver prepares these
info to firmware via firmware H2C command.
Since firmware only consider PS for single one vif, change the argument
of entry function to rtwvif, and only consider first link for this old
H2C command that only support legacy.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241206055716.18598-3-pkshih@realtek.com
|
|
Firmware can only support PS on single one VIF operating in station mode,
so argument of PS entry rtw89_enter_lps() should be rtwvif insetad of
rtwvif_link.
To enter PS under MLO, for each rtwvif, driver sends H2C command to tell
firmware which mac_id will enter PS one by one, and afterward asks
firmware to enter deep PS.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241206055716.18598-2-pkshih@realtek.com
|
|
nf_tables_chain_destroy can sleep, it can't be used from call_rcu
callbacks.
Moreover, nf_tables_rule_release() is only safe for error unwinding,
while transaction mutex is held and the to-be-desroyed rule was not
exposed to either dataplane or dumps, as it deactives+frees without
the required synchronize_rcu() in-between.
nft_rule_expr_deactivate() callbacks will change ->use counters
of other chains/sets, see e.g. nft_lookup .deactivate callback, these
must be serialized via transaction mutex.
Also add a few lockdep asserts to make this more explicit.
Calling synchronize_rcu() isn't ideal, but fixing this without is hard
and way more intrusive. As-is, we can get:
WARNING: .. net/netfilter/nf_tables_api.c:5515 nft_set_destroy+0x..
Workqueue: events nf_tables_trans_destroy_work
RIP: 0010:nft_set_destroy+0x3fe/0x5c0
Call Trace:
<TASK>
nf_tables_trans_destroy_work+0x6b7/0xad0
process_one_work+0x64a/0xce0
worker_thread+0x613/0x10d0
In case the synchronize_rcu becomes an issue, we can explore alternatives.
One way would be to allocate nft_trans_rule objects + one nft_trans_chain
object, deactivate the rules + the chain and then defer the freeing to the
nft destroy workqueue. We'd still need to keep the synchronize_rcu path as
a fallback to handle -ENOMEM corner cases though.
Reported-by: syzbot+b26935466701e56cfdc2@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67478d92.050a0220.253251.0062.GAE@google.com/T/
Fixes: c03d278fdf35 ("netfilter: nf_tables: wait for rcu grace period on net_device removal")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Deletion of the last rule referencing a given idletimer may happen at
the same time as a read of its file in sysfs:
| ======================================================
| WARNING: possible circular locking dependency detected
| 6.12.0-rc7-01692-g5e9a28f41134-dirty #594 Not tainted
| ------------------------------------------------------
| iptables/3303 is trying to acquire lock:
| ffff8881057e04b8 (kn->active#48){++++}-{0:0}, at: __kernfs_remove+0x20
|
| but task is already holding lock:
| ffffffffa0249068 (list_mutex){+.+.}-{3:3}, at: idletimer_tg_destroy_v]
|
| which lock already depends on the new lock.
A simple reproducer is:
| #!/bin/bash
|
| while true; do
| iptables -A INPUT -i foo -j IDLETIMER --timeout 10 --label "testme"
| iptables -D INPUT -i foo -j IDLETIMER --timeout 10 --label "testme"
| done &
| while true; do
| cat /sys/class/xt_idletimer/timers/testme >/dev/null
| done
Avoid this by freeing list_mutex right after deleting the element from
the list, then continuing with the teardown.
Fixes: 0902b469bd25 ("netfilter: xtables: idletimer target implementation")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
On some systems, neighbor discoveries from ns1 for fec0:42::1 (i.e., the
martian trap address) would happen at the wrong time and cause
false-negative test result.
Problem analysis also discovered that IPv6 martian ping test was broken
in that sent neighbor discoveries, not echo requests were inadvertently
trapped
Avoid the race condition by introducing the neighbors to each other
upfront. Also pin down the firewall rules to matching on echo requests
only.
Fixes: efb056e5f1f0 ("netfilter: ip6t_rpfilter: Fix regression with VRF interfaces")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This reverts commit 5c26d2f1d3f5e4be3e196526bead29ecb139cf91.
It turns out that we can't do this, because while the old behavior of
ignoring ignorable code points was most definitely wrong, we have
case-folding filesystems with on-disk hash values with that wrong
behavior.
So now you can't look up those names, because they hash to something
different.
Of course, it's also entirely possible that in the meantime people have
created *new* files with the new ("more correct") case folding logic,
and reverting will just make other things break.
The correct solution is to not do case folding in filesystems, but
sadly, people seem to never really understand that. People still see it
as a feature, not a bug.
Reported-by: Qi Han <hanqi@vivo.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219586
Cc: Gabriel Krisman Bertazi <krisman@suse.de>
Requested-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull vfio fix from Alex Williamson:
- Fix migration dirty page tracking support in the mlx5-vfio-pci
variant driver in configurations where the system page size exceeds
the device maximum message size, and anticipate device updates where
the opposite may also be required (Yishai Hadas)
* tag 'vfio-v6.13-rc3' of https://github.com/awilliam/linux-vfio:
vfio/mlx5: Align the page tracking max message size with the device capability
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fix from Shuah Khan:
- fix the offset for kprobe syntax error test case when checking the
BTF arguments on 64-bit powerpc
* tag 'linux_kselftest-fixes-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: adjust offset for kprobe syntax error test
|
|
The intent of the check is to see whether at least one UMC has ECC
enabled. So do that instead of tracking which ones are enabled in masks
which are too small in size anyway and lead to not loading the driver on
Zen4 machines with UMCs enabled over UMC8.
Fixes: e2be5955a886 ("EDAC/amd64: Add support for AMD Family 19h Models 10h-1Fh and A0h-AFh")
Reported-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Avadhut Naik <avadhut.naik@amd.com>
Reviewed-by: Avadhut Naik <avadhut.naik@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20241210212054.3895697-1-avadhut.naik@amd.com
|
|
The vmemmap's, which is used for RV64 with SPARSEMEM_VMEMMAP, page
tables are populated using pmd (page middle directory) hugetables.
However, the pmd allocation is not using the generic mechanism used by
the VMA code (e.g. pmd_alloc()), or the RISC-V specific
create_pgd_mapping()/alloc_pmd_late(). Instead, the vmemmap page table
code allocates a page, and calls vmemmap_set_pmd(). This results in
that the pmd ctor is *not* called, nor would it make sense to do so.
Now, when tearing down a vmemmap page table pmd, the cleanup code
would unconditionally, and incorrectly call the pmd dtor, which
results in a crash (best case).
This issue was found when running the HMM selftests:
| tools/testing/selftests/mm# ./test_hmm.sh smoke
| ... # when unloading the test_hmm.ko module
| page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10915b
| flags: 0x1000000000000000(node=0|zone=1)
| raw: 1000000000000000 0000000000000000 dead000000000122 0000000000000000
| raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
| page dumped because: VM_BUG_ON_PAGE(ptdesc->pmd_huge_pte)
| ------------[ cut here ]------------
| kernel BUG at include/linux/mm.h:3080!
| Kernel BUG [#1]
| Modules linked in: test_hmm(-) sch_fq_codel fuse drm drm_panel_orientation_quirks backlight dm_mod
| CPU: 1 UID: 0 PID: 514 Comm: modprobe Tainted: G W 6.12.0-00982-gf2a4f1682d07 #2
| Tainted: [W]=WARN
| Hardware name: riscv-virtio qemu/qemu, BIOS 2024.10 10/01/2024
| epc : remove_pgd_mapping+0xbec/0x1070
| ra : remove_pgd_mapping+0xbec/0x1070
| epc : ffffffff80010a68 ra : ffffffff80010a68 sp : ff20000000a73940
| gp : ffffffff827b2d88 tp : ff6000008785da40 t0 : ffffffff80fbce04
| t1 : 0720072007200720 t2 : 706d756420656761 s0 : ff20000000a73a50
| s1 : ff6000008915cff8 a0 : 0000000000000039 a1 : 0000000000000008
| a2 : ff600003fff0de20 a3 : 0000000000000000 a4 : 0000000000000000
| a5 : 0000000000000000 a6 : c0000000ffffefff a7 : ffffffff824469b8
| s2 : ff1c0000022456c0 s3 : ff1ffffffdbfffff s4 : ff6000008915c000
| s5 : ff6000008915c000 s6 : ff6000008915c000 s7 : ff1ffffffdc00000
| s8 : 0000000000000001 s9 : ff1ffffffdc00000 s10: ffffffff819a31f0
| s11: ffffffffffffffff t3 : ffffffff8000c950 t4 : ff60000080244f00
| t5 : ff60000080244000 t6 : ff20000000a73708
| status: 0000000200000120 badaddr: ffffffff80010a68 cause: 0000000000000003
| [<ffffffff80010a68>] remove_pgd_mapping+0xbec/0x1070
| [<ffffffff80fd238e>] vmemmap_free+0x14/0x1e
| [<ffffffff8032e698>] section_deactivate+0x220/0x452
| [<ffffffff8032ef7e>] sparse_remove_section+0x4a/0x58
| [<ffffffff802f8700>] __remove_pages+0x7e/0xba
| [<ffffffff803760d8>] memunmap_pages+0x2bc/0x3fe
| [<ffffffff02a3ca28>] dmirror_device_remove_chunks+0x2ea/0x518 [test_hmm]
| [<ffffffff02a3e026>] hmm_dmirror_exit+0x3e/0x1018 [test_hmm]
| [<ffffffff80102c14>] __riscv_sys_delete_module+0x15a/0x2a6
| [<ffffffff80fd020c>] do_trap_ecall_u+0x1f2/0x266
| [<ffffffff80fde0a2>] _new_vmalloc_restore_context_a0+0xc6/0xd2
| Code: bf51 7597 0184 8593 76a5 854a 4097 0029 80e7 2c00 (9002) 7597
| ---[ end trace 0000000000000000 ]---
| Kernel panic - not syncing: Fatal exception in interrupt
Add a check to avoid calling the pmd dtor, if the calling context is
vmemmap_free().
Fixes: c75a74f4ba19 ("riscv: mm: Add memory hotplugging support")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20241120131203.1859787-1-bjorn@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
flush_tlb_kernel_range() may use IPIs to flush the TLBs of all the
cores, which triggers the following warning when the irqs are disabled:
[ 3.455330] WARNING: CPU: 1 PID: 0 at kernel/smp.c:815 smp_call_function_many_cond+0x452/0x520
[ 3.456647] Modules linked in:
[ 3.457218] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 6.12.0-rc7-00010-g91d3de7240b8 #1
[ 3.457416] Hardware name: QEMU QEMU Virtual Machine, BIOS
[ 3.457633] epc : smp_call_function_many_cond+0x452/0x520
[ 3.457736] ra : on_each_cpu_cond_mask+0x1e/0x30
[ 3.457786] epc : ffffffff800b669a ra : ffffffff800b67c2 sp : ff2000000000bb50
[ 3.457824] gp : ffffffff815212b8 tp : ff6000008014f080 t0 : 000000000000003f
[ 3.457859] t1 : ffffffff815221e0 t2 : 000000000000000f s0 : ff2000000000bc10
[ 3.457920] s1 : 0000000000000040 a0 : ffffffff815221e0 a1 : 0000000000000001
[ 3.457953] a2 : 0000000000010000 a3 : 0000000000000003 a4 : 0000000000000000
[ 3.458006] a5 : 0000000000000000 a6 : ffffffffffffffff a7 : 0000000000000000
[ 3.458042] s2 : ffffffff815223be s3 : 00fffffffffff000 s4 : ff600001ffe38fc0
[ 3.458076] s5 : ff600001ff950d00 s6 : 0000000200000120 s7 : 0000000000000001
[ 3.458109] s8 : 0000000000000001 s9 : ff60000080841ef0 s10: 0000000000000001
[ 3.458141] s11: ffffffff81524812 t3 : 0000000000000001 t4 : ff60000080092bc0
[ 3.458172] t5 : 0000000000000000 t6 : ff200000000236d0
[ 3.458203] status: 0000000200000100 badaddr: ffffffff800b669a cause: 0000000000000003
[ 3.458373] [<ffffffff800b669a>] smp_call_function_many_cond+0x452/0x520
[ 3.458593] [<ffffffff800b67c2>] on_each_cpu_cond_mask+0x1e/0x30
[ 3.458625] [<ffffffff8000e4ca>] __flush_tlb_range+0x118/0x1ca
[ 3.458656] [<ffffffff8000e6b2>] flush_tlb_kernel_range+0x1e/0x26
[ 3.458683] [<ffffffff801ea56a>] kfence_protect+0xc0/0xce
[ 3.458717] [<ffffffff801e9456>] kfence_guarded_free+0xc6/0x1c0
[ 3.458742] [<ffffffff801e9d6c>] __kfence_free+0x62/0xc6
[ 3.458764] [<ffffffff801c57d8>] kfree+0x106/0x32c
[ 3.458786] [<ffffffff80588cf2>] detach_buf_split+0x188/0x1a8
[ 3.458816] [<ffffffff8058708c>] virtqueue_get_buf_ctx+0xb6/0x1f6
[ 3.458839] [<ffffffff805871da>] virtqueue_get_buf+0xe/0x16
[ 3.458880] [<ffffffff80613d6a>] virtblk_done+0x5c/0xe2
[ 3.458908] [<ffffffff8058766e>] vring_interrupt+0x6a/0x74
[ 3.458930] [<ffffffff800747d8>] __handle_irq_event_percpu+0x7c/0xe2
[ 3.458956] [<ffffffff800748f0>] handle_irq_event+0x3c/0x86
[ 3.458978] [<ffffffff800786cc>] handle_simple_irq+0x9e/0xbe
[ 3.459004] [<ffffffff80073934>] generic_handle_domain_irq+0x1c/0x2a
[ 3.459027] [<ffffffff804bf87c>] imsic_handle_irq+0xba/0x120
[ 3.459056] [<ffffffff80073934>] generic_handle_domain_irq+0x1c/0x2a
[ 3.459080] [<ffffffff804bdb76>] riscv_intc_aia_irq+0x24/0x34
[ 3.459103] [<ffffffff809d0452>] handle_riscv_irq+0x2e/0x4c
[ 3.459133] [<ffffffff809d923e>] call_on_irq_stack+0x32/0x40
So only flush the local TLB and let the lazy kfence page fault handling
deal with the faults which could happen when a core has an old protected
pte version cached in its TLB. That leads to potential inaccuracies which
can be tolerated when using kfence.
Fixes: 47513f243b45 ("riscv: Enable KFENCE for riscv64")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241209074125.52322-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
riscv uses fixmap addresses to map the dtb so we can't use __pa() which
is reserved for linear mapping addresses.
Fixes: b2473a359763 ("of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20241209074508.53037-1-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When CONFIG_DEBUG_RT_MUTEXES=y, mutex_lock->rt_mutex_try_acquire
would change from rt_mutex_cmpxchg_acquire to
rt_mutex_slowtrylock():
raw_spin_lock_irqsave(&lock->wait_lock, flags);
ret = __rt_mutex_slowtrylock(lock);
raw_spin_unlock_irqrestore(&lock->wait_lock, flags);
Because queued_spin_#ops to ticket_#ops is changed one by one by
jump_label, raw_spin_lock/unlock would cause a deadlock during the
changing.
That means in arch/riscv/kernel/jump_label.c:
1.
arch_jump_label_transform_queue() ->
mutex_lock(&text_mutex); +-> raw_spin_lock -> queued_spin_lock
|-> raw_spin_unlock -> queued_spin_unlock
patch_insn_write -> change the raw_spin_lock to ticket_lock
mutex_unlock(&text_mutex);
...
2. /* Dirty the lock value */
arch_jump_label_transform_queue() ->
mutex_lock(&text_mutex); +-> raw_spin_lock -> *ticket_lock*
|-> raw_spin_unlock -> *queued_spin_unlock*
/* BUG: ticket_lock with queued_spin_unlock */
patch_insn_write -> change the raw_spin_unlock to ticket_unlock
mutex_unlock(&text_mutex);
...
3. /* Dead lock */
arch_jump_label_transform_queue() ->
mutex_lock(&text_mutex); +-> raw_spin_lock -> ticket_lock /* deadlock! */
|-> raw_spin_unlock -> ticket_unlock
patch_insn_write -> change other raw_spin_#op -> ticket_#op
mutex_unlock(&text_mutex);
So, the solution is to disable mutex usage of
arch_jump_label_transform_queue() during early_boot_irqs_disabled, just
like we have done for stop_machine.
Reported-by: Conor Dooley <conor@kernel.org>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Fixes: ab83647fadae ("riscv: Add qspinlock support")
Link: https://lore.kernel.org/linux-riscv/CAJF2gTQwYTGinBmCSgVUoPv0_q4EPt_+WiyfUA1HViAKgUzxAg@mail.gmail.com/T/#mf488e6347817fca03bb93a7d34df33d8615b3775
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Nam Cao <namcao@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241130153310.3349484-1-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
As the snd_soc_card_get_kcontrol() is updated to use
snd_ctl_find_id_mixer() in
commit 897cc72b0837 ("ASoC: soc-card: Use
snd_ctl_find_id_mixer() instead of open-coding")
which make the iface fix to be IFACE_MIXER.
Fixes: 897cc72b0837 ("ASoC: soc-card: Use snd_ctl_find_id_mixer() instead of open-coding")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20241126053254.3657344-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As the snd_soc_card_get_kcontrol() is updated to use
snd_ctl_find_id_mixer() in
commit 897cc72b0837 ("ASoC: soc-card: Use
snd_ctl_find_id_mixer() instead of open-coding")
which make the iface fix to be IFACE_MIXER.
Fixes: 897cc72b0837 ("ASoC: soc-card: Use snd_ctl_find_id_mixer() instead of open-coding")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20241126053254.3657344-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since the linked fixes: commit, specifying a CPU on hybrid platforms
results in an error because Perf tries to open an extended type event
on "any" CPU which isn't valid. Extended type events can only be opened
on CPUs that match the type.
Before (working):
$ perf record --cpu 1 -- true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 2.385 MB perf.data (7 samples) ]
After (not working):
$ perf record -C 1 -- true
WARNING: A requested CPU in '1' is not supported by PMU 'cpu_atom' (CPUs 16-27) for event 'cycles:P'
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (cpu_atom/cycles:P/).
/bin/dmesg | grep -i perf may provide additional information.
(Ignore the warning message, that's expected and not particularly
relevant to this issue).
This is because perf_cpu_map__intersect() of the user specified CPU (1)
and one of the PMU's CPUs (16-27) correctly results in an empty (NULL)
CPU map. However for the purposes of opening an event, libperf converts
empty CPU maps into an any CPU (-1) which the kernel rejects.
Fix it by deleting evsels with empty CPU maps in the specific case where
user requested CPU maps are evaluated.
Fixes: 251aa040244a ("perf parse-events: Wildcard most "numeric" events")
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20241114160450.295844-2-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The refactoring of tool PMU events to have a PMU then adding the expr
literals to the tool PMU made it so that the literal system_tsc_freq
was only supported on x86. Update the test expectations to match -
namely the parsing is x86 specific and only yields a non-zero value on
Intel.
Fixes: 609aa2667f67 ("perf tool_pmu: Switch to standard pmu functions and json descriptions")
Reported-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Closes: https://lore.kernel.org/linux-perf-users/20241022140156.98854-1-atrajeev@linux.vnet.ibm.com/
Co-developed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: akanksha@linux.ibm.com
Cc: hbathini@linux.ibm.com
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20241205022305.158202-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
In 'NOFENTRY_ARGS' test case for syntax check, any offset X of
`vfs_read+X` except function entry offset (0) fits the criterion,
even if that offset is not at instruction boundary, as the parser
comes before probing. But with "ENDBR64" instruction on x86, offset
4 is treated as function entry. So, X can't be 4 as well. Thus, 8
was used as offset for the test case. On 64-bit powerpc though, any
offset <= 16 can be considered function entry depending on build
configuration (see arch_kprobe_on_func_entry() for implementation
details). So, use `vfs_read+20` to accommodate that scenario too.
Link: https://lore.kernel.org/r/20241129202621.721159-1-hbathini@linux.ibm.com
Fixes: 4231f30fcc34a ("selftests/ftrace: Add BTF arguments test cases")
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
DEFINE_IPL_ATTR_STR_RW() macro produces "unsigned 'len' is never less
than zero." warning when sys_vmcmd_on_*_store() callbacks are defined.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412081614.5uel8F6W-lkp@intel.com/
Fixes: 247576bf624a ("s390/ipl: Do not accept z/VM CP diag X'008' cmds longer than max length")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The bt_copy_from_sockptr() return value is being misinterpreted by most
users: a non-zero result is mistakenly assumed to represent an error code,
but actually indicates the number of bytes that could not be copied.
Remove bt_copy_from_sockptr() and adapt callers to use
copy_safe_from_sockptr().
For sco_sock_setsockopt() (case BT_CODEC) use copy_struct_from_sockptr() to
scrub parts of uninitialized buffer.
Opportunistically, rename `len` to `optlen` in hci_sock_setsockopt_old()
and hci_sock_setsockopt().
Fixes: 51eda36d33e4 ("Bluetooth: SCO: Fix not validating setsockopt user input")
Fixes: a97de7bff13b ("Bluetooth: RFCOMM: Fix not validating setsockopt user input")
Fixes: 4f3951242ace ("Bluetooth: L2CAP: Fix not validating setsockopt user input")
Fixes: 9e8742cdfc4b ("Bluetooth: ISO: Fix not validating setsockopt user input")
Fixes: b2186061d604 ("Bluetooth: hci_sock: Fix not validating setsockopt user input")
Reviewed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Since commit cdd30ebb1b9f ("module: Convert symbol namespace to string
literal"), exported symbols marked by EXPORT_SYMBOL_NS(_GPL) are
ignored by "kernel-doc -export" in fresh build of "make htmldocs".
This is because regex in the perl script for those markers fails to
match the new signatures:
- EXPORT_SYMBOL_NS(symbol, "ns");
- EXPORT_SYMBOL_NS_GPL(symbol, "ns");
Update the regex so that it matches quoted string.
Note: Escape sequence of \w is good for C identifiers, but can be
too strict for quoted strings. Instead, use \S, which matches any
non-whitespace character, for compatibility with possible extension
of namespace convention in the future [1].
Fixes: cdd30ebb1b9f ("module: Convert symbol namespace to string literal")
Link: https://lore.kernel.org/CAK7LNATMufXP0EA6QUE9hBkZMa6vJO6ZiaYuak2AhOrd2nSVKQ@mail.gmail.com/ [1]
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/e5c43f36-45cd-49f4-b7b8-ff342df3c7a4@gmail.com
|
|
Add Panther Lake PMT telemetry support.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://lore.kernel.org/r/20241210212646.239211-1-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add Clearwater Forest (INTEL_ATOM_DARKMONT_X) to the x86 match table of
Intel In Field Scan (IFS) driver, enabling IFS functionality on this
processor.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Link: https://lore.kernel.org/r/20241210203152.1136463-1-jithu.joseph@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
There's no info about the OEM behind the tablet, only online stores
listing. This tablet uses an Intel Atom x5-Z8300, 4GB of RAM & 64GB
of storage.
Signed-off-by: Huy Minh <buingoc67@gmail.com>
Link: https://lore.kernel.org/r/20241210154500.32124-1-buingoc67@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
l2tp_eth uses the TSTATS infrastructure (dev_sw_netstats_*()) for RX
and TX packet counters and DEV_STATS_INC for dropped counters.
Consolidate that using the DSTATS infrastructure, which can
handle both packet counters and packet drops. Statistics that don't
fit DSTATS are still updated atomically with DEV_STATS_INC().
This change is inspired by the introduction of DSTATS helpers and
their use in other udp tunnel drivers:
Link: https://lore.kernel.org/all/cover.1733313925.git.gnault@redhat.com/
Signed-off-by: James Chapman <jchapman@katalix.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
One specific test condition: the default registers of p[j].reg ~
p[j+3].reg are 0, TASDEVICE_REG(0x00, 0x14, 0x38)(PLT_FLAG_REG),
TASDEVICE_REG(0x00, 0x14, 0x40)(SINEGAIN_REG), and
TASDEVICE_REG(0x00, 0x14, 0x44)(SINEGAIN2_REG). After first calibration,
they are freshed to TASDEVICE_REG(0x00, 0x1a, 0x20), TASDEVICE_REG(0x00,
0x16, 0x58)(PLT_FLAG_REG), TASDEVICE_REG(0x00, 0x14, 0x44)(SINEGAIN_REG),
and TASDEVICE_REG(0x00, 0x16, 0x64)(SINEGAIN2_REG) via "Calibration Start"
kcontrol. In second calibration, the p[j].reg ~ p[j+3].reg have already
become tas2781_cali_start_reg. However, p[j+2].reg, TASDEVICE_REG(0x00,
0x14, 0x44)(SINEGAIN_REG), will be freshed to TASDEVICE_REG(0x00, 0x16,
0x64), which is the third register in the input params of the kcontrol.
This is why only first calibration can work, the second-time, third-time
or more-time calibration always failed without reboot. Of course, if no
p[j].reg is in the list of tas2781_cali_start_reg, this stress test can
work well.
Fixes: 49e2e353fb0d ("ASoC: tas2781: Add Calibration Kcontrols for Chromebook")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20241211043859.1328-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently, rswitch driver does not utilize most of MFWD forwarding
and processing features. It only uses port-based forwarding for ETHA
ports, and direct descriptor forwarding for GWCA port.
Update rswitch_fwd_init() to enable exactly that, and keep everything
else disabled.
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the stop routine of rswitch driver does not immediately
prevent hardware from continuing to update descriptors and requesting
interrupts.
It can happen that when rswitch_stop() executes the masking of
interrupts from the queues of the port being closed, napi poll for
that port is already scheduled or running on a different CPU. When
execution of this napi poll completes, it will unmask the interrupts.
And unmasked interrupt can fire after rswitch_stop() returns from
napi_disable() call. Then, the handler won't mask it, because
napi_schedule_prep() will return false, and interrupt storm will
happen.
This can't be fixed by making rswitch_stop() call napi_disable() before
masking interrupts. In this case, the interrupt storm will happen if
interrupt fires between napi_disable() and masking.
Fix this by checking for priv->opened_ports bit when unmasking
interrupts after napi poll. For that to be consistent, move
priv->opened_ports changes into spinlock-protected areas, and reorder
other operations in rswitch_open() and rswitch_stop() accordingly.
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Link: https://patch.msgid.link/20241209113204.175015-1-nikita.yoush@cogentembedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Nikita Yushchenko says:
====================
net: renesas: rswitch: several fixes
This series fixes several glitches found in the rswitch driver.
Repost of https://lore.kernel.org/20241206190015.4194153-1-nikita.yoush@cogentembedded.com
====================
Link: https://patch.msgid.link/20241208095004.69468-1-nikita.yoush@cogentembedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The device tree node saved in the rswitch_device structure is used at
several driver locations. So passing this node to of_node_put() after
the first use is wrong.
Move of_node_put() for this node to exit paths.
Fixes: b46f1e579329 ("net: renesas: rswitch: Simplify struct phy * handling")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://patch.msgid.link/20241208095004.69468-5-nikita.yoush@cogentembedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If error path is taken while filling descriptor for a frame, skb
pointer is left in the entry. Later, on the ring entry reuse, the
same entry could be used as a part of a multi-descriptor frame,
and skb for that new frame could be stored in a different entry.
Then, the stale pointer will reach the completion routine, and passed
to the release operation.
Fix that by clearing the saved skb pointer at the error path.
Fixes: d2c96b9d5f83 ("net: rswitch: Add jumbo frames handling for TX")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://patch.msgid.link/20241208095004.69468-4-nikita.yoush@cogentembedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If hardware is already transmitting, it can start handling the
descriptor being written to immediately after it observes updated DT
field, before the queue is kicked by a write to GWTRC.
If the start_xmit() execution is preempted at unfortunate moment, this
transmission can complete, and interrupt handled, before gq->cur gets
updated. With the current implementation of completion, this will cause
the last entry not completed.
Fix that by changing completion loop to check DT values directly, instead
of depending on gq->cur.
Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://patch.msgid.link/20241208095004.69468-3-nikita.yoush@cogentembedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When sending frame split into multiple descriptors, hardware processes
descriptors one by one, including writing back DT values. The first
descriptor could be already marked as completed when processing of
next descriptors for the same frame is still in progress.
Although only the last descriptor is configured to generate interrupt,
completion of the first descriptor could be noticed by the driver when
handling interrupt for the previous frame.
Currently, driver stores skb in the entry that corresponds to the first
descriptor. This results into skb could be unmapped and freed when
hardware did not complete the send yet. This opens a window for
corrupting the data being sent.
Fix this by saving skb in the entry that corresponds to the last
descriptor used to send the frame.
Fixes: d2c96b9d5f83 ("net: rswitch: Add jumbo frames handling for TX")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://patch.msgid.link/20241208095004.69468-2-nikita.yoush@cogentembedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Oleksij Rempel says:
====================
lan78xx: Preparations for PHYlink
This patch set is a second part of the preparatory work for migrating
the lan78xx USB Ethernet driver to the PHYlink framework. During
extensive testing, I observed that resetting the USB adapter can lead to
various read/write errors. While the errors themselves are acceptable,
they generate excessive log messages, resulting in significant log spam.
This set improves error handling to reduce logging noise by addressing
errors directly and returning early when necessary.
====================
Link: https://patch.msgid.link/20241209130751.703182-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
lan78xx_mdiobus_wait_not_busy
Rename `lan78xx_phy_wait_not_busy` to `lan78xx_mdiobus_wait_not_busy`
for clarity and accuracy, as the function operates on the MII bus rather
than a specific PHY. Update all references to reflect the new name.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241209130751.703182-11-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update `lan78xx_phy_wait_not_busy` to forward errors from
`lan78xx_read_reg` instead of overwriting them with `-EIO`. Replace
`-EIO` with `-ETIMEDOUT` for timeout cases, providing more specific and
appropriate error codes.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241209130751.703182-10-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update `lan78xx_set_features` to correctly return the result of
`lan78xx_write_reg`. This ensures that errors during register writes
are propagated to the caller.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241209130751.703182-7-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simplify `lan78xx_update_reg` by directly returning the result of
`lan78xx_write_reg`. This eliminates unnecessary checks and improves
code readability.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241209130751.703182-6-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
