summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-10-11ipv6: drop frames with attached skb->sk in forwardingHannes Frederic Sowa1-0/+3
This is a clone of commit 2ab957492d13b ("ip_forward: Drop frames with attached skb->sk") for ipv6. This commit has exactly the same reasons as the above mentioned commit, namely to prevent panics during netfilter reload or a misconfigured stack. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-11ipv6: gre: setup default multicast routes over PtP linksHannes Frederic Sowa1-0/+2
GRE point-to-point interfaces should also support ipv6 multicast. Setting up default multicast routes on interface creation was forgotten. Add it. Bugzilla: <https://bugzilla.kernel.org/show_bug.cgi?id=103231> Cc: Julien Muchembled <jm@jmuchemb.eu> Cc: Eric Dumazet <edumazet@google.com> Cc: Nicolas Dumazet <ndumazet@google.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-11bnx2x: Prevent UDP 4-tuple configurations on older adaptersYuval Mintz1-0/+7
Configuring 4-tuple RSS hsahing for UDP [E.g., by using `ethtool -N <interface> rx-flow-hash udp4 sdfn'] on a 57710/57711 adapter would cause it to assert as HW does not support such a configuration. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-11Merge branch 'mlxsw-fixes'David S. Miller2-2/+4
Jiri Pirko says: ==================== mlxsw: couple of fixes Just a couple of small fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-11mlxsw: Fix bug in __mlxsw_item_bit_array_offsetIdo Schimmel1-1/+3
When calculating the shift needed in order to access a bit array element in a byte, we should multiply the index by the element size and not assume it is fixed at 2-bits. Fixes: 93c1edb27f9e ("mlxsw: Introduce Mellanox switch driver core") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-11mlxsw: switchx2: changing order of exit fallbacksElad Raz1-1/+1
Fixes: 31557f0f9755 ("mlxsw: Introduce Mellanox SwitchX-2 ASIC support") Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-11sch_hhf: fix return value of hhf_drop()WANG Cong1-1/+10
Similar to commit c0afd9ce4d6a ("fq_codel: fix return value of fq_codel_drop()") ->drop() is supposed to return the number of bytes it dropped, but hhf_drop () returns the id of the bucket where it drops a packet from. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Terry Lam <vtlam@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09Merge branch 'mlx'David S. Miller4-4/+19
Or Gerlitz says: ==================== Mellanox driver update to 4.3-rc4 Small set of fixes for net, which includes Carol's patches, a fix from Achiad to have the right behaviour for mlx5 Eth devices w.r.t VLANs in promiscuous mode, a good-bye patch from Ido who left Mellanox and the 1st patch from Jiri to our NIC drivers (I love one-liners)... ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09MAINTAINERS: Update mlx4_en driver entryIdo Shamay1-1/+0
Remove Ido Shamay as co-maintainer for the mlx4 Ethernet driver, as he no longer works for Mellanox. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/mlx5e: Disable VLAN filter in promiscuous modeAchiad Shochat1-2/+14
When the device was set to promiscuous mode, we didn't disable VLAN filtering, which is wrong behaviour, fix that. Now when the device is set to promiscuous mode RX packets sent over any VLAN (or no VLAN tag at all) will be accepted. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/mlx5: Fix typo in mlx5_query_port_pvlcJiri Pirko1-1/+1
We used the wrong register name for querying the PVLC register Fixes: a124d13ef59e ('net/mlx5_core: Add more query port helpers') Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/mlx4_core: Avoid failing the interrupts testCarol L Soto1-0/+4
Test interrupts fails if not all completion vectors called request_irq. This case happens if only mlx4_en is loaded and we have more completion vectors than rx rings. Fixes: c66fa19c405a ('net/mlx4: Add EQ pool') Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Acked-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08net/mlx4: Remove shared_ports variable at mlx4_enable_msi_xCarol L Soto1-8/+2
If we get MAX_MSIX interrupts would like to have each receive ring with his own msix interrupt line. Do not need the shared_ports variable at mlx4_enable_msix Fixes: 9293267a3e2a ('net/mlx4_core: Capping number of requested MSIXs to MAX_MSIX') Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Acked-by: Matan Barak <matanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08net: mdio-octeon: Drop obsolete Kconfig adviceJean Delvare1-2/+0
"Y" was the right answer for MDIO_OCTEON when this option was only available on CAVIUM_OCTEON_SOC. But now that the option is visible on all (64-bit) systems, this piece of advice no longer makes sense. This helper module is selected automatically by drivers which need it anyway. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: a6d6786452 ("net: mdio-octeon: Modify driver to work on both ThunderX and Octeon") Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sunil Goutham <sgoutham@cavium.com> Cc: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Cc: David Daney <david.daney@cavium.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08mlxsw: fix warnings for big-endian 32-bit dma_addr_tArnd Bergmann1-4/+4
The recently added mlxsw driver produces warnings in ARM allmodconfig: drivers/net/ethernet/mellanox/mlxsw/pci.c: In function 'mlxsw_pci_cmd_exec': drivers/net/ethernet/mellanox/mlxsw/pci.c:1585:59: warning: right shift count >= width of type [-Wshift-count-overflow] linux/byteorder/big_endian.h:38:51: note: in definition of macro '__cpu_to_be32' drivers/net/ethernet/mellanox/mlxsw/pci.c:76:2: note: in expansion of macro 'iowrite32be' This uses upper_32_bits() to extract the bits while avoiding that warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jiri Pirko <jiri@mellanox.com> Fixes: eda6500a987a "mlxsw: Add PCI bus implementation" Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08bpf: clear sender_cpu before xmitAlexei Starovoitov1-0/+1
Similar to commit c29390c6dfee ("xps: must clear sender_cpu before forwarding") the skb->sender_cpu needs to be cleared before xmit. Fixes: 3896d655f4d4 ("bpf: introduce bpf_clone_redirect() helper") Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08act_mirred: clear sender cpu before sending to txWANG Cong1-0/+1
Similar to commit c29390c6dfee ("xps: must clear sender_cpu before forwarding") the skb->sender_cpu needs to be cleared when moving from Rx Tx, otherwise kernel could crash. Fixes: 2bd82484bb4c ("xps: fix xps for stacked devices") Cc: Eric Dumazet <edumazet@google.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08af_unix: constify the sock parameter in unix_sk()Paul Moore1-1/+1
Make unix_sk() just like inet[6]_sk() by constify'ing the sock parameter. Signed-off-by: Paul Moore <pmoore@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07Merge branch 'ovs-ct-fixes'David S. Miller5-30/+50
Joe Stringer says: ==================== OVS conntrack fixes for net The userspace side of the Open vSwitch conntrack changes is currently undergoing review, which has highlighted some minor bugs in the existing conntrack implementation in the kernel, as well as pointing out some future-proofing that can be done on the interface to reduce the need for additional compatibility code in future. The biggest changes here are to the userspace API for the ct_state match field and the CT action. This series proposes to firstly extend the ct_state match field to 32 bits, ensuring to reject any currently unsupported bits. Secondly, rather than representing CT action flags within a 32-bit field, simply use a netlink attribute as presence of the single flag that is defined today. This also serves to reject unsupported ct action flag bits. v4: Use 12-character abbreviated hashes in commit messages. v3: Fully acked. v2: Address minor style feedback, add acks. v1: Initial post. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07openvswitch: Change CT_ATTR_FLAGS to CT_ATTR_COMMITJoe Stringer2-17/+10
Previously, the CT_ATTR_FLAGS attribute, when nested under the OVS_ACTION_ATTR_CT, encoded a 32-bit bitmask of flags that modify the semantics of the ct action. It's more extensible to just represent each flag as a nested attribute, and this requires no additional error checking to reject flags that aren't currently supported. Suggested-by: Ben Pfaff <blp@nicira.com> Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07openvswitch: Extend ct_state match field to 32 bitsJoe Stringer4-11/+11
The ct_state field was initially added as an 8-bit field, however six of the bits are already being used and use cases are already starting to appear that may push the limits of this field. This patch extends the field to 32 bits while retaining the internal representation of 8 bits. This should cover forward compatibility of the ABI for the foreseeable future. This patch also reorders the OVS_CS_F_* bits to be sequential. Suggested-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07openvswitch: Reject ct_state unsupported bitsJoe Stringer2-0/+18
Previously, if userspace specified ct_state bits in the flow key which are currently undefined (and therefore unsupported), then they would be ignored. This could cause unexpected behaviour in future if userspace is extended to support additional bits but attempts to communicate with the current version of the kernel. This patch rectifies the situation by rejecting such ct_state bits. Fixes: 7f8a436eaa2c "openvswitch: Add conntrack action" Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07openvswitch: Ensure flow is valid before executing ctJoe Stringer1-0/+6
The ct action uses parts of the flow key, so we need to ensure that it is valid before executing that action. Fixes: 7f8a436eaa2c "openvswitch: Add conntrack action" Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07openvswitch: Fix skb leak in ovs_fragment()Joe Stringer1-4/+7
If ovs_fragment() was unable to fragment the skb due to an L2 header that exceeds the supported length, skbs would be leaked. Fix the bug. Fixes: 7f8a436eaa2c "openvswitch: Add conntrack action" Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07openvswitch: Fix typos in CT headersJoe Stringer1-2/+2
These comments hadn't caught up to their implementations, fix them. Fixes: 7f8a436eaa2c "openvswitch: Add conntrack action" Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07Merge branch 'dsa-unbind'David S. Miller1-11/+59
Neil Armstrong says: ==================== net: dsa: complete and fix the dsa unbinding In order to cleanly unbind the dsa core, either as a module removal, or a platform device unbind, switch the allocation the their devm_ counterparts and complete the destroy functions. First, the missing kfree were added, the remove function were completed then kfree were removed in favor to devm_ calls. The last patch is an way to cleanly exit the probe when no switch is found in the discover process. The patches are based on the current net. v3: - make checkpatch happy with 1/5 & 5/5 - fix 5/5 exit path with a goto ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: dsa: exit probe if no switch were foundNeil Armstrong1-3/+16
If no switch were found in dsa_setup_dst, return -ENODEV and exit the dsa_probe cleanly. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: dsa: switch to devm_ calls and remove kfree callsNeil Armstrong1-12/+5
Now the kfree calls exists in the the remove functions, remove them in all places except the of_probe functions and replace allocation calls with their devm_ counterparts. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: dsa: complete dsa_switch_destroyNeil Armstrong1-0/+37
When unbinding dsa, complete the dsa_switch_destroy to unregister the fixed link phy then cleanly unregister and destroy the net devices. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: dsa: add missing dsa_switch mdiobus removeNeil Armstrong1-0/+2
To prevent memory leakage on unbinding, add missing mdiobus unregister and unallocation calls. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: dsa: add missing kfree on removeNeil Armstrong1-1/+4
To prevent memory leakage on unbinding, add missing kfree calls. Includes minor cosmetic change to make patch clean. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: Fix vti use case with oif in dst lookups for IPv6David Ahern1-0/+1
It occurred to me yesterday that 741a11d9e4103 ("net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is set") means that xfrm6_dst_lookup needs the FLOWI_FLAG_SKIP_NH_OIF flag set. This latest commit causes the oif to be considered in lookups which is known to break vti. This explains why 58189ca7b274 did not the IPv6 change at the time it was submitted. Fixes: 42a7b32b73d6 ("xfrm: Add oif to dst lookups") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07i40e/i40evf: set AQ count after memory allocationMitch Williams2-4/+4
The standard way to check if the AQ is enabled is to look at the count field. So we should only set this field after we have successfully allocated memory. To do otherwise is to incite panic among the populace. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-06amd-xgbe: Check for successful buffer allocation before useTom Lendacky1-0/+3
The kasprintf function can return NULL if the allocation fails. Check for successful allocation before attempting to use the returned buffer. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05openvswitch: Fix ovs_vport_get_stats()Pravin B Shelar1-29/+13
Not every device has dev->tstats set. So when OVS tries to calculate vport stats it causes kernel panic. Following patch fixes it by using standard API to get net-device stats. ---8<--- Unable to handle kernel paging request at virtual address 766b4008 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: vport_vxlan vxlan ip6_udp_tunnel udp_tunnel tun bridge stp llc openvswitch ipv6 CPU: 7 PID: 1108 Comm: ovs-vswitchd Not tainted 4.3.0-rc3+ #82 PC is at ovs_vport_get_stats+0x150/0x1f8 [openvswitch] <snip> Call trace: [<ffffffbffc0859f8>] ovs_vport_get_stats+0x150/0x1f8 [openvswitch] [<ffffffbffc07cdb0>] ovs_vport_cmd_fill_info+0x140/0x1e0 [openvswitch] [<ffffffbffc07cf0c>] ovs_vport_cmd_dump+0xbc/0x138 [openvswitch] [<ffffffc00045a5ac>] netlink_dump+0xb8/0x258 [<ffffffc00045ace0>] __netlink_dump_start+0x120/0x178 [<ffffffc00045dd9c>] genl_family_rcv_msg+0x2d4/0x308 [<ffffffc00045de58>] genl_rcv_msg+0x88/0xc4 [<ffffffc00045cf24>] netlink_rcv_skb+0xd4/0x100 [<ffffffc00045dab0>] genl_rcv+0x30/0x48 [<ffffffc00045c830>] netlink_unicast+0x154/0x200 [<ffffffc00045cc9c>] netlink_sendmsg+0x308/0x364 [<ffffffc00041e10c>] sock_sendmsg+0x14/0x2c [<ffffffc000420d58>] SyS_sendto+0xbc/0xf0 Code: aa1603e1 f94037a4 aa1303e2 aa1703e0 (f9400465) Reported-by: Tomasz Sawicki <tomasz.sawicki@objectiveintegration.uk> Fixes: 8c876639c98 ("openvswitch: Remove vport stats.") Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05ARM: net: make BPF_LD | BPF_IND instruction trigger r_X initialisation to 0.Nicolas Schichan1-0/+1
Without this patch, if the only instructions using r_X are of the BPF_LD | BPF_IND type, r_X would not be reset to 0, using whatever value was there when entering the jited code. With this patch, r_X will be correctly marked as used so it will be reset to 0 in the prologue code. This fix also makes the test "LD_IND byte default X" pass in the test_bpf module when the ARM JIT is enabled. Signed-off-by: Nicolas Schichan <nschichan@freebox.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05ovs: do not allocate memory from offline numa nodeKonstantin Khlebnikov1-1/+2
When openvswitch tries allocate memory from offline numa node 0: stats = kmem_cache_alloc_node(flow_stats_cache, GFP_KERNEL | __GFP_ZERO, 0) It catches VM_BUG_ON(nid < 0 || nid >= MAX_NUMNODES || !node_online(nid)) [ replaced with VM_WARN_ON(!node_online(nid)) recently ] in linux/gfp.h This patch disables numa affinity in this case. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05bpf: fix panic in SO_GET_FILTER with native ebpf programsDaniel Borkmann1-1/+5
When sockets have a native eBPF program attached through setsockopt(sk, SOL_SOCKET, SO_ATTACH_BPF, ...), and then try to dump these over getsockopt(sk, SOL_SOCKET, SO_GET_FILTER, ...), the following panic appears: [49904.178642] BUG: unable to handle kernel NULL pointer dereference at (null) [49904.178762] IP: [<ffffffff81610fd9>] sk_get_filter+0x39/0x90 [49904.182000] PGD 86fc9067 PUD 531a1067 PMD 0 [49904.185196] Oops: 0000 [#1] SMP [...] [49904.224677] Call Trace: [49904.226090] [<ffffffff815e3d49>] sock_getsockopt+0x319/0x740 [49904.227535] [<ffffffff812f59e3>] ? sock_has_perm+0x63/0x70 [49904.228953] [<ffffffff815e2fc8>] ? release_sock+0x108/0x150 [49904.230380] [<ffffffff812f5a43>] ? selinux_socket_getsockopt+0x23/0x30 [49904.231788] [<ffffffff815dff36>] SyS_getsockopt+0xa6/0xc0 [49904.233267] [<ffffffff8171b9ae>] entry_SYSCALL_64_fastpath+0x12/0x71 The underlying issue is the very same as in commit b382c0865600 ("sock, diag: fix panic in sock_diag_put_filterinfo"), that is, native eBPF programs don't store an original program since this is only needed in cBPF ones. However, sk_get_filter() wasn't updated to test for this at the time when eBPF could be attached. Just throw an error to the user to indicate that eBPF cannot be dumped over this interface. That way, it can also be known that a program _is_ attached (as opposed to just return 0), and a different (future) method needs to be consulted for a dump. Fixes: 89aa075832b0 ("net: sock: allow eBPF programs to be attached to sockets") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05openvswitch: Rename LABEL->LABELSJoe Stringer6-55/+55
Conntrack LABELS (plural) are exposed by conntrack; rename the OVS name for these to be consistent with conntrack. Fixes: c2ac667 "openvswitch: Allow matching on conntrack label" Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05net/unix: fix logic about sk_peek_offsetAndrey Vagin1-5/+7
Now send with MSG_PEEK can return data from multiple SKBs. Unfortunately we take into account the peek offset for each skb, that is wrong. We need to apply the peek offset only once. In addition, the peek offset should be used only if MSG_PEEK is set. Cc: "David S. Miller" <davem@davemloft.net> (maintainer:NETWORKING Cc: Eric Dumazet <edumazet@google.com> (commit_signer:1/14=7%) Cc: Aaron Conole <aconole@bytheb.org> Fixes: 9f389e35674f ("af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag") Signed-off-by: Andrey Vagin <avagin@openvz.org> Tested-by: Aaron Conole <aconole@bytheb.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05act_mirred: always release tcf hashWANG Cong1-3/+3
Align with other tc actions. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05act_mirred: fix a race condition on mirred_listWANG Cong1-1/+10
After commit 1ce87720d456 ("net: sched: make cls_u32 lockless") we began to release tc actions in a RCU callback. However, mirred action relies on RTNL lock to protect the global mirred_list, therefore we could have a race condition between RCU callback and netdevice event, which caused a list corruption as reported by Vinson. Instead of relying on RTNL lock, introduce a spinlock to protect this list. Note, in non-bind case, it is still called with RTNL lock, therefore should disable BH too. Reported-by: Vinson Lee <vlee@twopensource.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05i40e: fix offload of GRE tunnelsJesse Brandeburg1-0/+2
The driver still was not offloading TSO on GRE tunnels because it forgot to set the GSO_GRE flag, causing lots of retransmits. This fixes generic GRE traffic (like a tunnel added like below) whereas before it would get 1Gb/s or less, now on a 10G adapter it gets 8.7Gb/s. ip ad ad 11.1.0.2/24 dev ens2f0 ip l set ens2f0 up ip link add gre2 type gretap remote 11.1.0.1 local 11.1.0.2 dev ens2f0 ip l set gre2 up ip ad ad 192.168.124.2/24 dev gre2 ping 192.168.124.1 netperf -H 192.168.124.1 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05Merge tag 'wireless-drivers-for-davem-2015-10-01' of ↵David S. Miller4-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== pull-request: wireless-drivers 2015-10-01 ath9k: * declare required extra tx headroom ath10k: * fix DMA related firmware crashes on multiple devices rt2800usb: * add usb ID 1b75:3070 for Airlive WT-2000USB b43: * probe bcma core (device) rev 0x15 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05ipv4: fix reply_dst leakage on arp replyJiri Benc1-3/+5
There are cases when the created metadata reply is not used. Ensure the allocated memory is freed also in such cases. Fixes: 63d008a4e9ee ("ipv4: send arp replies to the correct tunnel") Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05inet: fix race in reqsk_queue_unlink()Eric Dumazet1-9/+10
reqsk_timer_handler() tests if icsk_accept_queue.listen_opt is NULL at its beginning. By the time it calls inet_csk_reqsk_queue_drop() and reqsk_queue_unlink(), listener might have been closed and inet_csk_listen_stop() had called reqsk_queue_yank_acceptq() which sets icsk_accept_queue.listen_opt to NULL We therefore need to correctly check listen_opt being NULL after holding syn_wait_lock for proper synchronization. Fixes: fa76ce7328b2 ("inet: get rid of central tcp/dccp listener timer") Fixes: b357a364c57c ("inet: fix possible panic in reqsk_queue_unlink()") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05tcp/dccp: fix old style declarationsRaanan Avargil1-2/+2
I’m using the compilation flag -Werror=old-style-declaration, which requires that the “inline” word would come at the beginning of the code line. $ make drivers/net/ethernet/intel/e1000e/e1000e.ko ... include/net/inet_timewait_sock.h:116:1: error: ‘inline’ is not at beginning of declaration [-Werror=old-style-declaration] static void inline inet_twsk_schedule(struct inet_timewait_sock *tw, int timeo) include/net/inet_timewait_sock.h:121:1: error: ‘inline’ is not at beginning of declaration [-Werror=old-style-declaration] static void inline inet_twsk_reschedule(struct inet_timewait_sock *tw, int timeo) Fixes: ed2e92394589 ("tcp/dccp: fix timewait races in timer handling") Signed-off-by: Raanan Avargil <raanan.avargil@intel.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05net: lpc_eth: fix warnings caused by enabling unprepared clockVladimir Zapolskiy1-7/+6
If common clock framework is configured, the driver generates warnings, which are fixed by this change: WARNING: CPU: 0 PID: 1 at linux/drivers/clk/clk.c:727 clk_core_enable+0x2c/0xa4() Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.3.0-rc2+ #141 Hardware name: LPC32XX SoC (Flattened Device Tree) Backtrace: [<>] (dump_backtrace) from [<>] (show_stack+0x18/0x1c) [<>] (show_stack) from [<>] (dump_stack+0x20/0x28) [<>] (dump_stack) from [<>] (warn_slowpath_common+0x90/0xb8) [<>] (warn_slowpath_common) from [<>] (warn_slowpath_null+0x24/0x2c) [<>] (warn_slowpath_null) from [<>] (clk_core_enable+0x2c/0xa4) [<>] (clk_core_enable) from [<>] (clk_enable+0x24/0x38) [<>] (clk_enable) from [<>] (lpc_eth_drv_probe+0xfc/0x99c) [<>] (lpc_eth_drv_probe) from [<>] (platform_drv_probe+0x50/0xa0) [<>] (platform_drv_probe) from [<>] (driver_probe_device+0x18c/0x408) [<>] (driver_probe_device) from [<>] (__driver_attach+0x70/0x94) [<>] (__driver_attach) from [<>] (bus_for_each_dev+0x74/0x98) [<>] (bus_for_each_dev) from [<>] (driver_attach+0x20/0x28) [<>] (driver_attach) from [<>] (bus_add_driver+0x11c/0x248) [<>] (bus_add_driver) from [<>] (driver_register+0xa4/0xe8) [<>] (driver_register) from [<>] (__platform_driver_register+0x50/0x64) [<>] (__platform_driver_register) from [<>] (lpc_eth_driver_init+0x18/0x20) [<>] (lpc_eth_driver_init) from [<>] (do_one_initcall+0x11c/0x1dc) [<>] (do_one_initcall) from [<>] (kernel_init_freeable+0x10c/0x1d4) [<>] (kernel_init_freeable) from [<>] (kernel_init+0x10/0xec) [<>] (kernel_init) from [<>] (ret_from_fork+0x14/0x24) Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05net: usb: asix: Fix crash on skb alloc failureDavid B. Robins1-1/+3
If asix_rx_fixup_internal() fails to allocate rx->ax_skb, it will return but not clear rx->size. rx points to driver private data. A later call assumes that nonzero size means ax_skb was allocated and passes a null ax_skb to skb_put. Changed allocation failure return to clear size first. Found testing board with AX88772B devices. Signed-off-by: David B. Robins <linux@davidrobins.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05Merge tag 'linux-can-fixes-for-4.3-20150930' of ↵David S. Miller1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2015-09-30 this is a pull request of a single patch for 4.3. The patch is by Stephane Grosjean and add support for the peak OEM PCI card to the peak_pci driver by adding its device ID. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-20 16:53:30 +0300