| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A recent change added error checking messages and failed to remove one
of the previous error checks. There are now two checks on variable err
so the second one is redundant dead code and can be removed.
Addresses-Coverity: ("Logically dead code")
Fixes: a83bdada06bf ("octeontx2-af: Add debug messages for failures")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210818130927.33895-1-colin.king@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
linux-can-next-for-5.15-20210819
The first patch is by me, for the mailmap file and maps the email
address of two former ESD employees to a newly created role account.
The next 3 patches are by Oleksij Rempel and add support for GPIO
based switchable CAN bus termination.
The next 3 patches are by Vincent Mailhol. The first one changes the
CAN netlink interface to not bail out if the user switched off
unsupported features. The next one adds Vincent as the maintainer of
the etas_es58x driver and the last one cleans up the documentation of
struct es58x_fd_tx_conf_msg.
The next patch is by me, for the mcp251xfd driver and marks some
instances of struct mcp251xfd_priv as const. Lad Prabhakar contributes
2 patches for the rcar_canfd driver, that add support for RZ/G2L
family.
The next 5 patches target the m_can/tcan45x5 driver. 2 are by me an
fix trivial checkpatch warnings. The remaining 3 patches are by Matt
Kline and improve the performance on the SPI based tcan4x5x chip by
batching FIFO reads and writes.
The last 7 patches are for the c_can driver. Dario Binacchi's patch
converts the DT bindings to yaml, 2 patches by me fix a typo and
rename a macro to properly represent the usage. The last 4 patches are
again by Dario Binacchi and provide a performance improvement for the
TX path by operating the TX mailboxes as a true FIFO.
* tag 'linux-can-next-for-5.15-20210819' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (22 commits)
can: c_can: cache frames to operate as a true FIFO
can: c_can: support tx ring algorithm
can: c_can: exit c_can_do_tx() early if no frames have been sent
can: c_can: remove struct c_can_priv::priv field
can: c_can: rename IF_RX -> IF_NAPI
can: c_can: c_can_do_tx(): fix typo in comment
dt-bindings: net: can: c_can: convert to json-schema
can: m_can: Batch FIFO writes during CAN transmit
can: m_can: Batch FIFO reads during CAN receive
can: m_can: Disable IRQs on FIFO bus errors
can: m_can: fix block comment style
can: tcan4x5x: cdev_to_priv(): remove stray empty line
can: rcar_canfd: Add support for RZ/G2L family
dt-bindings: net: can: renesas,rcar-canfd: Document RZ/G2L SoC
can: mcp251xfd: mark some instances of struct mcp251xfd_priv as const
can: etas_es58x: clean-up documentation of struct es58x_fd_tx_conf_msg
MAINTAINERS: add Vincent MAILHOL as maintainer for the ETAS ES58X CAN/USB driver
can: netlink: allow user to turn off unsupported features
can: dev: provide optional GPIO based termination support
dt-bindings: can: fsl,flexcan: enable termination-* bindings
...
====================
Link: https://lore.kernel.org/r/20210819133913.657715-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As reported by a comment in the c_can_start_xmit() this was not a FIFO.
C/D_CAN controller sends out the buffers prioritized so that the lowest
buffer number wins.
What did c_can_start_xmit() do if head was less tail in the tx ring ? It
waited until all the frames queued in the FIFO was actually transmitted
by the controller before accepting a new CAN frame to transmit, even if
the FIFO was not full, to ensure that the messages were transmitted in
the order in which they were loaded.
By storing the frames in the FIFO without requiring its transmission, we
will be able to use the full size of the FIFO even in cases such as the
one described above. The transmission interrupt will trigger their
transmission only when all the messages previously loaded but stored in
less priority positions of the buffers have been transmitted.
Link: https://lore.kernel.org/r/20210807130800.5246-5-dariobin@libero.it
Suggested-by: Gianluca Falavigna <gianluca.falavigna@inwind.it>
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The algorithm is already used successfully by other CAN drivers
(e.g. mcp251xfd). Its implementation was kindly suggested to me by
Marc Kleine-Budde following a patch I had previously submitted. You can
find every detail at https://lore.kernel.org/patchwork/patch/1422929/.
The idea is that after this patch, it will be easier to patch the driver
to use the message object memory as a true FIFO.
Link: https://lore.kernel.org/r/20210807130800.5246-4-dariobin@libero.it
Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The c_can_poll() handles RX/TX events unconditionally. It may therefore
happen that c_can_do_tx() is called unnecessarily because the interrupt
was triggered by the reception of a frame. In these cases, we avoid to
execute unnecessary statements and exit immediately.
Link: https://lore.kernel.org/r/20210807130800.5246-3-dariobin@libero.it
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
It references the clock but it is never used. So let's remove it.
Link: https://lore.kernel.org/r/20210807130800.5246-2-dariobin@libero.it
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The C_CAN/D_CAN cores implement 2 interfaces to manage the message
objects. To avoid concurrency and the need for locking one interface
is used in the TX path (IF_TX). While the other one, named IF_RX is
used from NAPI context only. As this interface is not only used to
manage RX, but also TX message objects, this patch renames IF_RX to
IF_NAPI.
Link: https://lore.kernel.org/r/20210809080608.171545-1-mkl@pengutronix.de
Cc: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch fixes a typo in the comment in c_can_do_tx().
Fixes: eddf67115040 ("can: c_can: add a comment about IF_RX interface's use")
Link: https://lore.kernel.org/r/20210806105127.103302-1-mkl@pengutronix.de
Cc: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Convert the Bosch C_CAN/D_CAN controller device tree binding
documentation to json-schema.
Document missing properties.
Remove "ti,hwmods" as it is no longer used in TI dts.
Make "clocks" required as it is used in all dts.
Update the examples.
Link: https://lore.kernel.org/r/20210805192750.9051-1-dariobin@libero.it
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Give FIFO writes the same treatment as reads to avoid fixed costs of
individual transfers on a slow bus (e.g., tcan4x5x).
Link: https://lore.kernel.org/r/20210817050853.14875-4-matt@bitbashing.io
Signed-off-by: Matt Kline <matt@bitbashing.io>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
On peripherals communicating over a relatively slow SPI line
(e.g. tcan4x5x), individual transfers have high fixed costs.
This causes the driver to spend most of its time waiting between
transfers and severely limits throughput.
Reduce these overheads by reading more than one word at a time.
Writing could get a similar treatment in follow-on commits.
Link: https://lore.kernel.org/r/20210817050853.14875-3-matt@bitbashing.io
Signed-off-by: Matt Kline <matt@bitbashing.io>
[mkl: remove __packed from struct id_and_dlc]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
If FIFO reads or writes fail due to the underlying regmap (e.g., SPI)
I/O, propagate that up to the m_can driver, log an error, and disable
interrupts, similar to the mcp251xfd driver.
While reworking the FIFO functions to add this error handling,
add support for bulk reads and writes of multiple registers.
Link: https://lore.kernel.org/r/20210817050853.14875-2-matt@bitbashing.io
Signed-off-by: Matt Kline <matt@bitbashing.io>
[mkl: re-wrap long lines, remove WARN_ON, convert to netdev block comments]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch fixes the commenting style in the m_can driver.
Fixes: 1be37d3b0414 ("can: m_can: fix periph RX path: use rx-offload to ensure skbs are sent from softirq context")
Fixes: df06fd678260 ("can: m_can: m_can_chip_config(): enable and configure internal timestamps")
Link: https://lore.kernel.org/r/20210819111703.599686-2-mkl@pengutronix.de
Cc: Chandrasekar Ramakrishnan <rcsekar@samsung.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch removes a stray empty line in the cdev_to_priv() function.
Fixes: ac33ffd3e2b0 ("can: m_can: let m_can_class_allocate_dev() allocate driver specific private data")
Link: https://lore.kernel.org/r/20210819111703.599686-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
CANFD block on RZ/G2L SoC is almost identical to one found on
R-Car Gen3 SoC's. On RZ/G2L SoC interrupt sources for each channel
are split into different sources and the IP doesn't divide (1/2)
CANFD clock within the IP.
This patch adds compatible string for RZ/G2L family and splits
the irq handlers to accommodate both RZ/G2L and R-Car Gen3 SoC's.
Link: https://lore.kernel.org/r/20210727133022.634-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
[mkl: fixed typo: recieve -> receive, thanks Geert]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add CANFD binding documentation for Renesas RZ/G2L SoC.
Link: https://lore.kernel.org/r/20210727133022.634-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
With the patch 07ff4aed015c ("time/timecounter: Mark 1st argument of
timecounter_cyc2time() as const") some instances of the struct
mcp251xfd_priv can be marked as const. This patch marks these as
const.
Link: https://lore.kernel.org/r/20210813091027.159379-1-mkl@pengutronix.de
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Thomas Kopp <thomas.kopp@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The documentation of struct es58x_fd_tx_conf_msg explains in details
the different TDC parameters. However, those description are redundant
with the documentation of struct can_tdc.
Remove most of the description.
Also, fixes a typo in the reference to the datasheet (E701 -> E70).
Link: https://lore.kernel.org/r/20210815033248.98111-8-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Adding myself (Vincent Mailhol) as a maintainer for the ETAS ES58X
CAN/USB driver.
Link: https://lore.kernel.org/r/20210814093353.74391-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The sanity checks on the control modes will reject any request related
to an unsupported features, even turning it off.
Example on an interface which does not support CAN-FD:
$ ip link set can0 type can bitrate 500000 fd off
RTNETLINK answers: Operation not supported
This patch lets such command go through (but requests to turn on an
unsupported feature are, of course, still denied).
Link: https://lore.kernel.org/r/20210815033248.98111-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
For CAN buses to work, a termination resistor has to be present at both
ends of the bus. This resistor is usually 120 Ohms, other values may be
required for special bus topologies.
This patch adds support for a generic GPIO based CAN termination. The
resistor value has to be specified via device tree, and it can only be
attached to or detached from the bus. By default the termination is not
active.
Link: https://lore.kernel.org/r/20210818071232.20585-4-o.rempel@pengutronix.de
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Enable termination-* binding and provide validation example for it.
Link: https://lore.kernel.org/r/20210818071232.20585-3-o.rempel@pengutronix.de
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Some boards provide GPIO controllable termination resistor. Provide
binding to make use of it.
Link: https://lore.kernel.org/r/20210818071232.20585-2-o.rempel@pengutronix.de
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Don't populate the array stpa on the stack but instead it
static const. Makes the object code smaller by 81 bytes:
Before:
text data bss dec hex filename
54993 17248 0 72241 11a31 ./drivers/net/ethernet/ti/cpsw_new.o
After:
text data bss dec hex filename
54784 17376 0 72160 119e0 ./drivers/net/ethernet/ti/cpsw_new.o
(gcc version 10.3.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Don't populate the array spec_opcode on the stack but instead it
static const. Makes the object code smaller by 158 bytes:
Before:
text data bss dec hex filename
12271 3976 128 16375 3ff7 .../hisilicon/hns3/hns3pf/hclge_cmd.o
After:
text data bss dec hex filename
12017 4072 128 16217 3f59 .../hisilicon/hns3/hns3pf/hclge_cmd.o
(gcc version 10.3.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Don't populate the array speeds on the stack but instead it
static const. Makes the object code smaller by 17 bytes:
Before:
text data bss dec hex filename
39987 14200 64 54251 d3eb .../huawei/hinic/hinic_sriov.o
After:
text data bss dec hex filename
39906 14264 64 54234 d3da .../huawei/hinic/hinic_sriov.o
(gcc version 10.3.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Eli Cohen says:
====================
Indirect dev ingress qdisc creation order
The first patch is just a cleanup of the code.
The second patch is fixing the dependency in ingress qdisc creation
relative to offloading driver registration to filter configurations.
v1 -> v2:
Fix warning - variable set but not used
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, when creating an ingress qdisc on an indirect device before
the driver registered for callbacks, the driver will not have a chance
to register its filter configuration callbacks.
To fix that, modify the code such that it keeps track of all the ingress
qdiscs that call flow_indr_dev_setup_offload(). When a driver calls
flow_indr_dev_register(), go through the list of tracked ingress qdiscs
and call the driver callback entry point so as to give it a chance to
register its callback.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
rcu field is not used. Remove it.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mii_ethtool_gset() does not return any errors. Since there are no users
of this function that rely on its return value, it can be
made void.
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mii_ethtool_gset() does not return any errors, so error handling can be
omitted to make code more simple.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Biju Das says:
====================
ravb: Add Gigabit Ethernet driver support
The DMAC and EMAC blocks of Gigabit Ethernet IP found on RZ/G2L SoC are
similar to the R-Car Ethernet AVB IP.
The Gigabit Ethernet IP consists of Ethernet controller (E-MAC), Internal
TCP/IP Offload Engine (TOE) and Dedicated Direct memory access controller
(DMAC).
With a few changes in the driver we can support both IPs.
Currently a runtime decision based on the chip type is used to distinguish
the HW differences between the SoC families.
This patch series is in preparation for supporting the RZ/G2L SoC by
replacing driver data chip type with struct ravb_hw_info by moving chip
type to it and also adding gstrings_stats, gstrings_size, net_hw_features,
net_features, aligned_tx, stats_len, max_rx_len variables to
it. This patch also adds the feature bit for {RX, TX} clock internal
delays and TX counters HW features found on R-Car Gen3 to struct
ravb_hw_info.
This patch series is based on net-next.
v2->v3:
* Removed num_gstat_queue variable from struct ravb_hw_info.
* started using unsigned int for num_tx_desc variable in struct ravb_private
* split the patch 'Add struct ravb_hw_info to driver data' into two
* Renamed skb_sz to max_rx_len and tx_drop_cntrs to tx_counters
and also updated the comments.
v1->v2:
* Replaced driver data chip type with struct ravb_hw_info
* Added gstrings_stats, gstrings_size, net_hw_features, net_features,
num_gstat_queue, num_tx_desc, stats_len, skb_sz to struct ravb_hw_info
* Added internal_delay and tx_drop_cntrs hw feature bit to struct ravb_hw_info
RFC->V1
* Incorporated feedback from Andrew, Sergei, Geert and Prabhakar
* https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=515525
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The register for retrieving TX counters is present only on R-Car Gen3
and RZ/G2L; it is not present on R-Car Gen2.
Add the tx_counters hw feature bit to struct ravb_hw_info, to enable this
feature specifically for R-Car Gen3 now and later extend it to RZ/G2L.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
R-Car Gen3 supports TX and RX clock internal delay modes, whereas R-Car
Gen2 and RZ/G2L do not support it.
Add an internal_delay hw feature bit to struct ravb_hw_info to enable this
only for R-Car Gen3.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On R-Car the checksum calculation on RX frames is done by the E-MAC
module, whereas on RZ/G2L it is done by the TOE.
TOE calculates the checksum of received frames from E-MAC and outputs it to
DMAC. TOE also calculates the checksum of transmission frames from DMAC and
outputs it E-MAC.
Add net_features and net_hw_features to struct ravb_hw_info, to support
subsequent SoCs without any code changes in the ravb_probe function.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The device stats strings for R-Car and RZ/G2L are different.
R-Car provides 30 device stats, whereas RZ/G2L provides only 15. In
addition, RZ/G2L has stats "rx_queue_0_csum_offload_errors" instead of
"rx_queue_0_missed_errors".
Add structure variables gstrings_stats and gstrings_size to struct
ravb_hw_info, so that subsequent SoCs can be added without any code
changes in the ravb_get_strings function.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
R-Car provides 30 device stats, whereas RZ/G2L provides only 15. In
addition, RZ/G2L has stats "rx_queue_0_csum_offload_errors" instead of
"rx_queue_0_missed_errors".
Replace RAVB_STATS_LEN macro with a structure variable stats_len to
struct ravb_hw_info, to support subsequent SoCs without any code changes
to the ravb_get_sset_count function.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The maximum descriptor size that can be specified on the reception side for
R-Car is 2048 bytes, whereas for RZ/G2L it is 8096.
Add the max_rx_len variable to struct ravb_hw_info for allocating different
RX skb buffer sizes for R-Car and RZ/G2L using the netdev_alloc_skb
function.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
R-Car Gen2 needs a 4byte aligned address for the transmission buffer,
whereas R-Car Gen3 doesn't have any such restriction.
Add aligned_tx to struct ravb_hw_info to select the driver to choose
between aligned and unaligned tx buffers.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The DMAC and EMAC blocks of Gigabit Ethernet IP found on RZ/G2L SoC are
similar to the R-Car Ethernet AVB IP. With a few changes in the driver we
can support both IPs.
This patch adds the struct ravb_hw_info to hold hw features, driver data
and function pointers to support both the IPs. It also replaces the driver
data chip type with struct ravb_hw_info by moving chip type to it.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The number of TX descriptors per packet is an unsigned value and
the variable for holding this information should be unsigned.
This patch replaces the data type of num_tx_desc variable in struct
ravb_private from 'int' to 'unsigned int'.
This patch also updates the data type of local variables to unsigned int,
where the local variables are evaluated using num_tx_desc.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Matthias Fuchs's and Thomas Körper's email addresses aren't valid
anymore. Use the newly created role account instead.
Link: https://lore.kernel.org/r/20210809175843.207864-1-mkl@pengutronix.de
Cc: socketcan@esd.eu
Cc: Stefan Mätje <Stefan.Maetje@esd.eu>
Acked-by: Stefan Mätje <stefan.maetje@esd.eu>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The ARRAY_SIZE macro is defined to get an array's size which is
more compact and more formal in linux source. Thus, we can replace
the long sizeof(arr)/sizeof(arr[0]) with the compact ARRAY_SIZE.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20210817121106.44189-1-wangborong@cdjrlc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the declaration of fill_imix_distribution() is dependent
on CONFIG_XFRM. This is incorrect.
Move fill_imix_distribution() declaration out of #ifndef CONFIG_XFRM
block.
Signed-off-by: Nick Richardson <richardsonnick@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add gfp_t mask as an input parameter to mem_cgroup_charge_skmem(),
to give more control to the networking stack and enable it to change
memcg charging behavior. In the future, the networking stack may decide
to avoid oom-kills when fallbacks are more appropriate.
One behavior change in mem_cgroup_charge_skmem() by this patch is to
avoid force charging by default and let the caller decide when and if
force charging is needed through the presence or absence of
__GFP_NOFAIL.
Signed-off-by: Wei Wang <weiwan@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
VLAN TCI is a 16 bit field which includes Priority(3 bits),
CFI(1 bit) and VID(12 bits). Currently ntuple filters support
installing rules to steer packets based on VID only.
This patch extends that support such that filters can
be installed for entire VLAN TCI.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 09e856d54bda ("vrf: Reset skb conntrack connection on VRF rcv")
fixes the "reverse-DNAT" of an SNAT-ed packet over a VRF.
This patch adds a test for this scenario.
Signed-off-by: Lahav Schlesinger <lschlesinger@drivenets.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is only one caller for ops_free(), so inline it.
Separate net_drop_ns() and net_free(), so the net_free()
can be called directly.
Add free_exit_list() helper function for free net_exit_list.
====================
v2:
- v1 does not apply, rebase it.
====================
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for tag_sja1105 running on non-sja1105 DSA ports, by making
sure that every time we dereference dp->priv, we check the switch's
dsa_switch_ops (otherwise we access a struct sja1105_port structure that
is in fact something else).
This adds an unconditional build-time dependency between sja1105 being
built as module => tag_sja1105 must also be built as module. This was
there only for PTP before.
Some sane defaults must also take place when not running on sja1105
hardware. These are:
- sja1105_xmit_tpid: the sja1105 driver uses different VLAN protocols
depending on VLAN awareness and switch revision (when an encapsulated
VLAN must be sent). Default to 0x8100.
- sja1105_rcv_meta_state_machine: this aggregates PTP frames with their
metadata timestamp frames. When running on non-sja1105 hardware, don't
do that and accept all frames unmodified.
- sja1105_defer_xmit: calls sja1105_port_deferred_xmit in sja1105_main.c
which writes a management route over SPI. When not running on sja1105
hardware, bypass the SPI write and send the frame as-is.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Bongsu Jeon says:
====================
Update the virtual NCI device driver and add the NCI testcase
This series updates the virtual NCI device driver and NCI selftest code
and add the NCI test case in selftests.
1/8 to use wait queue in virtual device driver.
2/8 to remove the polling code in selftests.
3/8 to fix a typo.
4/8 to fix the next nlattr offset calculation.
5/8 to fix the wrong condition in if statement.
6/8 to add a flag parameter to the Netlink send function.
7/8 to extract the start/stop discovery function.
8/8 to add the NCI testcase in selftests.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
