summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2009-04-24USB: fix mos7840 problem with minor numbersTony Cook1-11/+19
This patch fixes a problem with any mos7840 device where the use of the field "minor" before it is initialised results in all the devices being overlaid in memory (minor = 0 for all instances) Contributed by: Phillip Branch Signed-off-by: Tony Cook <tony-cook@bigpond.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-24USB: mos7840: add new device idTony Cook1-0/+7
add USB ids for the mos7840 based ATEN International serial devices. Contributed by: Phillip Branch Signed-off-by: Tony Cook <tony-cook@bigpond.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-24USB: musb: fix build when !CONFIG_PMAlexander Beregalov1-1/+1
Fix this build error when CONFIG_PM is not set: drivers/usb/musb/musb_core.c:2232: error: 'musb_resume_early' undeclared here Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-24USB: musb: Remove my email address from few musb related driversJarkko Nikula3-3/+0
This email address is going to expire soon and my contribution to musb is next to zero so remove it. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-24USB: Gadget: MIPS CI13xxx UDC bugfixesDavid Lopo1-1/+3
Bug Fix: high speed detection in LPM mode Bug Fix: max packet size configuration when switching between HS and FS Signed-off-by: David Lopo <dlopo@chipidea.mips.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-24USB: Unusual Device support for Gold MP3 Player EnergyChuck Short1-0/+6
Reported by Alessio Treglia on https://bugs.launchpad.net/ubuntu/+source/linux/+bug/125250 User was getting the following errors in dmesg: [ 2158.139386] sd 5:0:0:1: ioctl_internal_command return code = 8000002 [ 2158.139390] : Current: sense key: No Sense [ 2158.139393] Additional sense: No additional sense information Adds unusual device support. modified: drivers/usb/storage/unusual_devs.h Signed-off-by: Chuck Short <zulcss@ubuntu.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-24USB: serial: fix lifetime and locking problemsAlan Stern1-36/+68
This patch (as1229) fixes a few lifetime and locking problems in the usb-serial driver. The main symptom is that an invalid kevent is created when the serial device is unplugged while a connection is active. Ports should be unregistered when device is disconnected, not when the parent usb_serial structure is deallocated. Each open file should hold a reference to the corresponding port structure, and the reference should be released when the file is closed. serial->disc_mutex should be acquired in serial_open(), to resolve the classic race between open and disconnect. serial_close() doesn't need to hold both serial->disc_mutex and port->mutex at the same time. Release the subdriver's module reference only after releasing all the other references, in case one of the release routines needs to invoke some code in the subdriver module. Replace a call to flush_scheduled_work() (which is prone to deadlocks) with cancel_work_sync(). Also, add a call to cancel_work_sync() in the disconnect routine. Reduce the scope of serial->disc_mutex in serial_disconnect(). The only place it really needs to protect is where the "disconnected" flag is set. This fixes the bug reported in http://bugs.freedesktop.org/show_bug.cgi?id=20703 Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Dan Williams <dcbw@redhat.com> Tested-by: Ming Lei <tom.leiming@gmail.com> Reviewed-by: Oliver Neukum <oliver@neukum.org> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-24MAINTAINERS: update IDE entryBartlomiej Zolnierkiewicz1-1/+1
By a popular demand quilt tree was replaced by a git one. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-24palm_bk3710: palm_bk3710_udmatimings[] CodingStyle fixupBartlomiej Zolnierkiewicz1-6/+6
Remove superfluous commas and add missing whitespaces. Noticed-by: Joe Perches <joe@perches.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-24palm_bk3710: those registers/bitfields don't existDavid Brownell1-49/+18
Bugfixes noted by checking the code against the controller documentation (TI document number SPRUE21): - Remove declarations for eight non-existent registers (!); and remove accesses to two of them. - Remove access to various non-existent bitfields in some of the registers which *do* exist (those fields must-be-zero). - Provide comment to replace bogus reset logic (removed above, it relied on non-existent bitfields). Resets require GPIO help; this driver doesn't currently know about that. With some minor cleanup: relocate a comment, avoid an extra lookup of the PIO timings. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-23ARM: OMAP3: Clean up spurious interrupt check logicRoger Quadros1-2/+2
SPURIOUSIRQ is contained in bits 31:7 of INTC_SIR, so INTC_SIR must be right shifted by 7, not 6. No change in logic, only changes for better readability. Refer to register definition of INTCPS_SIR_IRQ in OMAP3 Manual. Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-04-23ARM: OMAP3: Fixed spurious IRQ issue for GPIO interruptsRoger Quadros1-1/+5
Flush posted write to IRQSTATUS register in GPIO IRQ handler. This eliminates the below error for all peripherals that use GPIO interrupts. <4>Spurious irq 95: 0xffffffdf, please flush posted write for irq 31 Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-04-23ARM: OMAP3: remove duplicated #includeHuang Weiyi1-1/+0
Removed duplicated #include in arch/arm/mach-omap2/board-rx51.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-04-23ARM: OMAP2/3: GPIO: do not attempt to wake-enableKevin Hilman1-10/+4
The GPIO IRQ enable/disable path attempts to also enable IRQ wake support for the parent GPIO bank IRQ as well. However, since there is no 'set_wake' hook for the bank IRQs, these calls will always fail. Also, since the enable will fail on the suspend path, the disable on the resume path will trigger unbalanced enable/disable warnings. This was discovered in the suspend/resume path on OMAP3/Beagle using the gpio-keys driver which disables/re-enables GPIO IRQ wakeups in the suspend/resume path. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-04-23ARM: OMAP2: possible division by 0Roel Kluin1-1/+1
In linus' git tree the functions can be found at: vi arch/arm/mach-omap2/usb-tusb6010.c +200 - tusb6010_platform_retime() vi arch/arm/mach-omap2/gpmc.c +94 - gpmc_get_fclk_period() vi arch/arm/mach-omap2/usb-tusb6010.c +53 - tusb_set_async_mode() vi arch/arm/mach-omap2/usb-tusb6010.c +111 - tusb_set_sync_mode() is -ENODEV appropriate when sysclk_ps == 0? This was found by code analysis, please review. ------------------------------>8-------------8<--------------------------------- gpmc_get_fclk_period() may return 0 when gpmc_l3_clk is not enabled. This is not checked in tusb6010_platform_retime() nor in tusb_set_async_mode() it seems. In tusb_set_sync_mode() this may result in a division by zero. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-04-23ARM: OMAP2: Remove defines and resource init for OMAP24XX EACJarkko Nikula2-133/+0
There is no anymore legacy driver for OMAP24XX Enhanced Audio Controller in linux-omap and it was newer in mainline so cleanup these unneeded defines and initialization code. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-04-23ARM: OMAP1: Fix mmc_set_power GPIO usageLadislav Michl2-10/+2
Simple simplification... Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-04-23ARM: OMAP1: Simplify board-h2 MMC setupLadislav Michl1-10/+4
Simplify board-h2 MMC setup Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-04-23ARM: OMAP: MMC: Remove unused power_pinLadislav Michl2-3/+0
Remove unused power_pin Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-04-23ARM: OMAP: Remove old dead gpio expander codeTony Lindgren4-235/+0
This should be done with GPIO calls. Patches against the mainline tree welcome to add the necessary working functionality back. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-04-23ARM: OMAP: Fix for possible race condition in omap_free_dma()Santosh Shilimkar1-7/+6
Fix the possible race condition in omap_free_dma(). Function omap_free_dma() sets the dev_id = -1 and then accesses the channel afterwards to clear it. But setting the dev_id=-1 makes the channel available for allocation again. So it is possible someone else can grab it and results are unpredictable. To avod this DMA channle is cleared first and then the dev_id = -1 is set. Thanks to McNeil, Sean <sean.mcneil@ti.com> for ointing out this issue. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-04-23davinci: add arch_ioremap() which uses existing static mappingsKevin Hilman12-98/+105
Add arch-specific ioremap() which uses any existing static mappings in place of doing a new mapping. From now on, drivers should always use ioremap() instead of IO_ADDRESS(). In addition, remove the davinci_[read|write]* macros in favor of using ioremap. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-04-23davinci: major rework of clock, PLL, PSC infrastructureKevin Hilman10-234/+402
This is a significant rework of the low-level clock, PLL and Power Sleep Controller (PSC) implementation for the DaVinci family. The primary goal is to have better modeling if the hardware clocks and features with the aim of DVFS functionality. Highlights: - model PLLs and all PLL-derived clocks - model parent/child relationships of PLLs and clocks - convert to new clkdev layer - view clock frequency and refcount via /proc/davinci_clocks Special thanks to significant contributions and testing by David Brownell. Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-04-23davinci: add runtime CPU detection supportKevin Hilman2-3/+75
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-04-23davinci: add default Kconfig, add HAVE_IDEKevin Hilman2-0/+1785
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-04-23microblaze: add parameter to microblaze_read()Coly Li1-1/+1
This patch modifies parameter of microblaze_read() from 'void' to 'struct clocksource *cs', which fixes compile warning for incompatible parameter type. Signed-off-by: Coly Li <coly.li@suse.de> Cc: Michal Simek <monstr@monstr.eu> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23microblaze: Use CFLAGS_KERNEL instead of CFLAGSMichal Simek1-4/+2
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23microblaze: Add STATE_SAVE_ARG_SPACE for noMMU kernel tooMichal Simek3-4/+15
For noMMU kernel this change nothing bring but this change helps with MMU synchronization. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23microblaze: Do not check use_dcacheMichal Simek1-3/+0
It is not necessary to check cpuinfo.use_dcache because this checking is done in function which call that functions Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23microblaze: Do not use PVR configuration for broken MB versionMichal Simek2-3/+8
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23microblaze: Fix USR1/2 pvr printing messageMichal Simek1-2/+2
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23microblaze: iowrite upon timeoutRoel Kluin1-1/+1
retries reaches -1, so the iowrite occurrs upon timeout. Acked-by: John Williams <john.williams@petalogix.com> Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23microblaze: Correspond CONFIG...PCMP in Makefile/KconfigMichal Simek1-1/+1
Makefile contained different cpu config flag than is in Kconfig.auto in platform folder Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23microblaze: Remove redundant variableMichal Simek1-4/+1
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23microblaze: Move start_thread to process.cMichal Simek2-10/+12
This change is due to upcomming MMU merge Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23microblaze: Add missing preadv and pwritev syscallsMichal Simek2-1/+5
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23microblaze: Add missing declaration for die and _exception funcMichal Simek1-0/+3
This change remove sparse errors. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23microblaze: Remove sparse error in traps.cMichal Simek1-1/+1
CHECK arch/microblaze/kernel/traps.c arch/microblaze/kernel/traps.c:37:47: warning: Using plain integer as NULL pointer CC arch/microblaze/kernel/traps.o Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23microblaze: Move task_pt_regs upMichal Simek1-3/+3
This change is important for easier merge with Microblaze MMU code. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23microblaze: Rename kernel_mode to pt_mode in pt_regsMichal Simek4-6/+6
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23microblaze: Remove uncache shadow conditionMichal Simek1-5/+0
Uncached shadow feature is not supported in current kernel code that's why I removed it. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23microblaze: Remove while(1) loop from show_regs functionMichal Simek1-2/+0
I removed it because of show_regs can't break die function. If process/kernel failed, die (do_exit) function resolve it. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23microblaze: Remove unneded per cpu SYSCALL_SAVE variableMichal Simek1-1/+0
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23[S390] update default configuration.Martin Schwidefsky1-13/+50
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-04-23[S390] omit frame pointers on s390 when possibleHeiko Carstens1-4/+4
Always omit frame pointers on s390. They aren't too useful for the kernel since we have already the kernel stack backchain which allows us to walk the kernel stack. So eleminate the extra code for frame pointers. Only allow the extra code for the function tracer since the gcc compile options -pg and -fomit-frame-pointer are incompatible. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-04-23[S390] Use tape_generic_offline directly.Frank Munzert4-16/+7
tape_3590_offline and tape_34xx_offline are removed and tape_generic_offline is called directly instead. Signed-off-by: Frank Munzert <munzert@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-04-23[S390] /proc/stat idle field for idle cpusMartin Schwidefsky3-0/+25
The cpu idle field in the output of /proc/stat is too small for cpus that have been idle for more than a tick. Add the architecture hook arch_idle_time that allows to add the not accounted idle time of a sleeping cpu without waking the cpu. The s390 implementation of arch_idle_time uses the already existing s390_idle_data per_cpu variable to find the sleep time of a neighboring idle cpu. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-04-23[S390] appldata: avoid deadlock with appldata_memGerald Schaefer2-17/+17
The appldata_ops callbacks are called with a spin_lock held. But the appldata_mem callback then calls all_vm_events(), which calls get_online_cpus(), which might sleep. This possible deadlock is fixed by using a mutex instead of a spin_lock. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-04-23[S390] ipl: fix compile breakageHeiko Carstens1-0/+1
Fix this for !CONFIG_SMP: arch/s390/kernel/ipl.c: In function 'stop_run': arch/s390/kernel/ipl.c:1461: error: implicit declaration of function 'signal_processor' Reported-by: Sachin Sant <sachinp@in.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-04-23GFS2: Ensure that the inode goal block settings are updatedSteven Whitehouse1-1/+9
GFS2 has a goal block associated with each inode indicating the search start position for future block allocations (in fact there are two, but thats for backward compatibility with GFS1 as they are set to identical locations in GFS2). In some circumstances, depending on the ordering of updates to the inode it was possible for the goal block settings to not be updated on disk. This patch ensures that the goal block will always get updated, thus reducing the potential for searching the same (already allocated) blocks again when looking for free space during block allocation. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 05:15:06 +0300