summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-03-09Merge branch 'nvme-4.16-rc5' of git://git.infradead.org/nvme into for-linusJens Axboe6-57/+30
Pull NVMe fixes for this series from Keith: "A few late fixes for 4.16: * Reverting sysfs slave device links for native nvme multipathing. The hidden disk attributes broke common user tools. * A fix for a PPC pci error handling regression. * Update pci interrupt count to consider the actual IRQ spread, fixing potentially poor initial queue affinity. * Off-by-one errors in nvme-fc queue sizes * A fabrics discovery fix to be more tolerant with user tools." * 'nvme-4.16-rc5' of git://git.infradead.org/nvme: nvme_fc: rework sqsize handling nvme-fabrics: Ignore nr_io_queues option for discovery controllers Revert "nvme: create 'slaves' and 'holders' entries for hidden controllers" nvme: pci: pass max vectors as num_possible_cpus() to pci_alloc_irq_vectors nvme-pci: Fix EEH failure on ppc
2018-03-09Merge branch 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie33-294/+381
into drm-fixes Fixes for 4.16. A bit bigger than I would have liked, but most of that is DC fixes which Harry helped me pull together from the past few weeks. Highlights: - Fix DL DVI with DC - Various RV fixes for DC - Overlay fixes for DC - Fix HDMI2 handling on boards without HBR tables in the vbios - Fix crash with pass-through on SI on amdgpu - Fix RB harvesting on KV - Fix hibernation failures on UVD with certain cards * 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux: (35 commits) drm/amd/display: validate plane format on primary plane drm/amdgpu:Always save uvd vcpu_bo in VM Mode drm/amdgpu:Correct max uvd handles drm/amd/display: early return if not in vga mode in disable_vga drm/amd/display: Fix takover from VGA mode drm/amd/display: Fix memleaks when atomic check fails. drm/amd/display: Return success when enabling interrupt drm/amd/display: Use crtc enable/disable_vblank hooks drm/amd/display: update infoframe after dig fe is turned on drm/amd/display: fix boot-up on vega10 drm/amd/display: fix cursor related Pstate hang drm/amd/display: Set irq state only on existing crtcs drm/amd/display: Fixed non-native modes not lighting up drm/amd/display: Call update_stream_signal directly from amdgpu_dm drm/amd/display: Make create_stream_for_sink more consistent drm/amd/display: Don't block dual-link DVI modes drm/amd/display: Don't allow dual-link DVI on all ASICs. drm/amd/display: Pass signal directly to enable_tmds_output drm/amd/display: Remove unnecessary fail labels in create_stream_for_sink drm/amd/display: Move MAX_TMDS_CLOCK define to header ...
2018-03-09Merge tag 'drm-misc-fixes-2018-03-07' of ↵Dave Airlie5-44/+60
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes sun4i fixes on clk, division by zero and LVDS. * tag 'drm-misc-fixes-2018-03-07' of git://anongit.freedesktop.org/drm/drm-misc: drm/sun4i: crtc: Call drm_crtc_vblank_on / drm_crtc_vblank_off drm/sun4i: rgb: Fix potential division by zero drm/sun4i: tcon: Reduce the scope of the LVDS error a bit drm/sun4i: Release exclusive clock lock when disabling TCON drm/sun4i: Fix dclk_set_phase
2018-03-09Merge tag 'drm-intel-fixes-2018-03-07' of ↵Dave Airlie3-28/+23
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - 2 fixes: 1 for perf and 1 execlist submission race. * tag 'drm-intel-fixes-2018-03-07' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Suspend submission tasklets around wedging drm/i915/perf: fix perf stream opening lock
2018-03-08Merge tag 'mips_fixes_4.16_4' of ↵Linus Torvalds6-25/+38
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS fixes from James Hogan: "A miscellaneous pile of MIPS fixes for 4.16: - move put_compat_sigset() to evade hardened usercopy warnings (4.16) - select ARCH_HAVE_PC_{SERIO,PARPORT} for Loongson64 platforms (4.16) - fix kzalloc() failure handling in ath25 (3.19) and Octeon (4.0) - fix disabling of IPIs during BMIPS suspend (3.19)" * tag 'mips_fixes_4.16_4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: MIPS: BMIPS: Do not mask IPIs during suspend MIPS: Loongson64: Select ARCH_MIGHT_HAVE_PC_SERIO MIPS: Loongson64: Select ARCH_MIGHT_HAVE_PC_PARPORT signals: Move put_compat_sigset to compat.h to silence hardened usercopy MIPS: OCTEON: irq: Check for null return on kzalloc allocation MIPS: ath25: Check for kzalloc allocation failure
2018-03-08Merge tag 'chrome-platform-4.16-rc4-fixes' of ↵Linus Torvalds1-11/+11
git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform Pull chrome platform fix from Benson Leung: "Revert a problematic patch that constified something imporperly" * tag 'chrome-platform-4.16-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform: Revert "platform/chrome: chromeos_laptop: make chromeos_laptop const"
2018-03-08nvme_fc: rework sqsize handlingJames Smart1-10/+17
Corrected four outstanding issues in the transport around sqsize. 1: Create Connection LS is sending the 1's-based sqsize, should be sending the 0's-based value. 2: allocation of hw queue is using the 0's-base size. It should be using the 1's-based value. 3: normalization of ctrl.sqsize by MQES is using MQES+1 (1's-based value). It should be MQES (0's-based value). 4: Missing clause to ensure queue_count not larger than ctrl->sqsize. Corrected by: Clean up routines that pass queue size around. The queue size value is the actual count (1's-based) value and determined from ctrl->sqsize + 1. Routines that send 0's-based value adapt from queue size. Sset ctrl->sqsize properly for MQES. Added clause to nsure queue_count not larger than ctrl->sqsize + 1. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <keith.busch@intel.com>
2018-03-08ALSA: hda: add dock and led support for HP ProBook 640 G2Dennis Wassenberg1-0/+1
This patch adds missing initialisation for HP 2013 UltraSlim Dock Line-In/Out PINs and activates keyboard mute/micmute leds for HP ProBook 640 G2 Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-08ALSA: hda: add dock and led support for HP EliteBook 820 G3Dennis Wassenberg1-0/+1
This patch adds missing initialisation for HP 2013 UltraSlim Dock Line-In/Out PINs and activates keyboard mute/micmute leds for HP EliteBook 820 G3 Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-08Merge branch 'stable/for-jens-4.15' of ↵Jens Axboe1-9/+8
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-linus Pull a xen_blkfront fix from Konrad: "It has one simple fix for the multi-queue support not showing up after a block device was detached/re-attached." * 'stable/for-jens-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen-blkfront: move negotiate_mq to cover all cases of new VBDs
2018-03-08nvme-fabrics: Ignore nr_io_queues option for discovery controllersRoland Dreier1-0/+5
This removes a dependency on the order options are passed when creating a fabrics controller. With the old code, if "nr_io_queues" appears before an "nqn" option specifying the discovery controller, then nr_io_queues is overridden with zero. If "nr_io_queues" appears after specifying the discovery controller, then the nr_io_queues option is used to set the number of queues, and the driver attempts to establish IO connections to the discovery controller (which doesn't work). It seems better to ignore (and warn about) the "nr_io_queues" option if userspace has already asked to connect to the discovery controller. Signed-off-by: Roland Dreier <roland@purestorage.com> Reviewed-by: James Smart <james.smart@broadcom.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <keith.busch@intel.com>
2018-03-08kbuild: Handle builtin dtb file names containing hyphensJames Hogan1-4/+4
cmd_dt_S_dtb constructs the assembly source to incorporate a devicetree FDT (that is, the .dtb file) as binary data in the kernel image. This assembly source contains labels before and after the binary data. The label names incorporate the file name of the corresponding .dtb file. Hyphens are not legal characters in labels, so .dtb files built into the kernel with hyphens in the file name result in errors like the following: bcm3368-netgear-cvg834g.dtb.S: Assembler messages: bcm3368-netgear-cvg834g.dtb.S:5: Error: : no such section bcm3368-netgear-cvg834g.dtb.S:5: Error: junk at end of line, first unrecognized character is `-' bcm3368-netgear-cvg834g.dtb.S:6: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_begin:' bcm3368-netgear-cvg834g.dtb.S:8: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_end:' bcm3368-netgear-cvg834g.dtb.S:9: Error: : no such section bcm3368-netgear-cvg834g.dtb.S:9: Error: junk at end of line, first unrecognized character is `-' Fix this by updating cmd_dt_S_dtb to transform all hyphens from the file name to underscores when constructing the labels. As of v4.16-rc2, 1139 .dts files across ARM64, ARM, MIPS and PowerPC contain hyphens in their names, but the issue only currently manifests on Broadcom MIPS platforms, as that is the only place where such files are built into the kernel. For example when CONFIG_DT_NETGEAR_CVG834G=y, or on BMIPS kernels when the dtbs target is used (in the latter case it admittedly shouldn't really build all the dtb.o files, but thats a separate issue). Fixes: 695835511f96 ("MIPS: BMIPS: rename bcm96358nb4ser to bcm6358-neufbox4-sercom") Signed-off-by: James Hogan <jhogan@kernel.org> Reviewed-by: Frank Rowand <frowand.list@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: <stable@vger.kernel.org> # 4.9+ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-08scripts/bloat-o-meter: fix typos in helpMatteo Croce1-1/+1
The bloat-o-meter script has two typos in the help, fix both. Fixes: 192efb7a1f9b ("bloat-o-meter: provide 3 different arguments for data, function and All") Signed-off-by: Matteo Croce <mcroce@redhat.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-08x86/MCE: Serialize sysfs changesSeunghun Han1-1/+21
The check_interval file in /sys/devices/system/machinecheck/machinecheck<cpu number> directory is a global timer value for MCE polling. If it is changed by one CPU, mce_restart() broadcasts the event to other CPUs to delete and restart the MCE polling timer and __mcheck_cpu_init_timer() reinitializes the mce_timer variable. If more than one CPU writes a specific value to the check_interval file concurrently, mce_timer is not protected from such concurrent accesses and all kinds of explosions happen. Since only root can write to those sysfs variables, the issue is not a big deal security-wise. However, concurrent writes to these configuration variables is void of reason so the proper thing to do is to serialize the access with a mutex. Boris: - Make store_int_with_restart() use device_store_ulong() to filter out negative intervals - Limit min interval to 1 second - Correct locking - Massage commit message Signed-off-by: Seunghun Han <kkamagui@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180302202706.9434-1-kkamagui@gmail.com
2018-03-08x86/MCE: Save microcode revision in machine check recordsTony Luck2-1/+4
Updating microcode used to be relatively rare. Now that it has become more common we should save the microcode version in a machine check record to make sure that those people looking at the error have this important information bundled with the rest of the logged information. [ Borislav: Simplify a bit. ] Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Yazen Ghannam <yazen.ghannam@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180301233449.24311-1-tony.luck@intel.com
2018-03-08xen: xenbus: use put_device() instead of kfree()Arvind Yadav1-1/+4
Never directly free @dev after calling device_register(), even if it returned an error! Always use put_device() to give up the reference initialized. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-03-08ALSA: hda/realtek - Make dock sound work on ThinkPad L570Dennis Wassenberg1-0/+1
One version of Lenovo Thinkpad T570 did not use ALC298 (like other Kaby Lake devices). Instead it uses ALC292. In order to make the Lenovo dock working with that codec the dock quirk for ALC292 will be used. Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-08x86/pti: Fix a comment typoSeunghun Han1-1/+1
s/visinble/visible/ Signed-off-by: Seunghun Han <kkamagui@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1520397135-132809-1-git-send-email-kkamagui@gmail.com
2018-03-08ALSA: seq: Remove superfluous snd_seq_queue_client_leave_cells() callTakashi Iwai1-1/+0
With the previous two fixes for the write / ioctl races: ALSA: seq: Don't allow resizing pool in use ALSA: seq: More protection for concurrent write and ioctl races the cells aren't any longer in queues at the point calling snd_seq_pool_done() in snd_seq_ioctl_set_client_pool(). Hence the function call snd_seq_queue_client_leave_cells() can be dropped safely from there. Suggested-by: Nicolai Stange <nstange@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-08ALSA: seq: More protection for concurrent write and ioctl racesTakashi Iwai4-13/+24
This patch is an attempt for further hardening against races between the concurrent write and ioctls. The previous fix d15d662e89fc ("ALSA: seq: Fix racy pool initializations") covered the race of the pool initialization at writer and the pool resize ioctl by the client->ioctl_mutex (CVE-2018-1000004). However, basically this mutex should be applied more widely to the whole write operation for avoiding the unexpected pool operations by another thread. The only change outside snd_seq_write() is the additional mutex argument to helper functions, so that we can unlock / relock the given mutex temporarily during schedule() call for blocking write. Fixes: d15d662e89fc ("ALSA: seq: Fix racy pool initializations") Reported-by: 范龙飞 <long7573@126.com> Reported-by: Nicolai Stange <nstange@suse.de> Reviewed-and-tested-by: Nicolai Stange <nstange@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-08x86/microcode: Synchronize late microcode loadingAshok Raj1-26/+92
Original idea by Ashok, completely rewritten by Borislav. Before you read any further: the early loading method is still the preferred one and you should always do that. The following patch is improving the late loading mechanism for long running jobs and cloud use cases. Gather all cores and serialize the microcode update on them by doing it one-by-one to make the late update process as reliable as possible and avoid potential issues caused by the microcode update. [ Borislav: Rewrite completely. ] Co-developed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: https://lkml.kernel.org/r/20180228102846.13447-8-bp@alien8.de
2018-03-08x86/microcode: Request microcode on the BSPBorislav Petkov1-6/+5
... so that any newer version can land in the cache and can later be fished out by the application functions. Do that before grabbing the hotplug lock. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: https://lkml.kernel.org/r/20180228102846.13447-7-bp@alien8.de
2018-03-08x86/microcode/intel: Look into the patch cache firstBorislav Petkov1-6/+5
The cache might contain a newer patch - look in there first. A follow-on change will make sure newest patches are loaded into the cache of microcode patches. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: https://lkml.kernel.org/r/20180228102846.13447-6-bp@alien8.de
2018-03-08x86/microcode: Do not upload microcode if CPUs are offlineAshok Raj1-0/+18
Avoid loading microcode if any of the CPUs are offline, and issue a warning. Having different microcode revisions on the system at any time is outright dangerous. [ Borislav: Massage changelog. ] Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: http://lkml.kernel.org/r/1519352533-15992-4-git-send-email-ashok.raj@intel.com Link: https://lkml.kernel.org/r/20180228102846.13447-5-bp@alien8.de
2018-03-08x86/microcode/intel: Writeback and invalidate caches before updating microcodeAshok Raj1-0/+12
Updating microcode is less error prone when caches have been flushed and depending on what exactly the microcode is updating. For example, some of the issues around certain Broadwell parts can be addressed by doing a full cache flush. [ Borislav: Massage it and use native_wbinvd() in both cases. ] Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: http://lkml.kernel.org/r/1519352533-15992-3-git-send-email-ashok.raj@intel.com Link: https://lkml.kernel.org/r/20180228102846.13447-4-bp@alien8.de
2018-03-08x86/microcode/intel: Check microcode revision before updating sibling threadsAshok Raj1-3/+24
After updating microcode on one of the threads of a core, the other thread sibling automatically gets the update since the microcode resources on a hyperthreaded core are shared between the two threads. Check the microcode revision on the CPU before performing a microcode update and thus save us the WRMSR 0x79 because it is a particularly expensive operation. [ Borislav: Massage changelog and coding style. ] Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: http://lkml.kernel.org/r/1519352533-15992-2-git-send-email-ashok.raj@intel.com Link: https://lkml.kernel.org/r/20180228102846.13447-3-bp@alien8.de
2018-03-08x86/microcode: Get rid of struct apply_microcode_ctxBorislav Petkov1-11/+8
It is a useless remnant from earlier times. Use the ucode_state enum directly. No functional change. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: https://lkml.kernel.org/r/20180228102846.13447-2-bp@alien8.de
2018-03-08x86/spectre_v2: Don't check microcode versions when running under hypervisorsKonrad Rzeszutek Wilk1-0/+7
As: 1) It's known that hypervisors lie about the environment anyhow (host mismatch) 2) Even if the hypervisor (Xen, KVM, VMWare, etc) provided a valid "correct" value, it all gets to be very murky when migration happens (do you provide the "new" microcode of the machine?). And in reality the cloud vendors are the ones that should make sure that the microcode that is running is correct and we should just sing lalalala and trust them. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Wanpeng Li <kernellwp@gmail.com> Cc: kvm <kvm@vger.kernel.org> Cc: Krčmář <rkrcmar@redhat.com> Cc: Borislav Petkov <bp@alien8.de> CC: "H. Peter Anvin" <hpa@zytor.com> CC: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180226213019.GE9497@char.us.oracle.com
2018-03-08ALSA: seq: Don't allow resizing pool in useTakashi Iwai1-0/+3
This is a fix for a (sort of) fallout in the recent commit d15d662e89fc ("ALSA: seq: Fix racy pool initializations") for CVE-2018-1000004. As the pool resize deletes the existing cells, it may lead to a race when another thread is writing concurrently, eventually resulting a UAF. A simple workaround is not to allow the pool resizing when the pool is in use. It's an invalid behavior in anyway. Fixes: d15d662e89fc ("ALSA: seq: Fix racy pool initializations") Reported-by: 范龙飞 <long7573@126.com> Reported-by: Nicolai Stange <nstange@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-08x86/vsyscall/64: Drop "native" vsyscallsAndy Lutomirski4-30/+10
Since Linux v3.2, vsyscalls have been deprecated and slow. From v3.2 on, Linux had three vsyscall modes: "native", "emulate", and "none". "emulate" is the default. All known user programs work correctly in emulate mode, but vsyscalls turn into page faults and are emulated. This is very slow. In "native" mode, the vsyscall page is easily usable as an exploit gadget, but vsyscalls are a bit faster -- they turn into normal syscalls. (This is in contrast to vDSO functions, which can be much faster than syscalls.) In "none" mode, there are no vsyscalls. For all practical purposes, "native" was really just a chicken bit in case something went wrong with the emulation. It's been over six years, and nothing has gone wrong. Delete it. Signed-off-by: Andy Lutomirski <luto@kernel.org> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Kernel Hardening <kernel-hardening@lists.openwall.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/519fee5268faea09ae550776ce969fa6e88668b0.1520449896.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-08Revert "platform/chrome: chromeos_laptop: make chromeos_laptop const"Dmitry Torokhov1-11/+11
This reverts commit a376cd91606365609d8fbd57247618bd51da1fc6 because chromeos_laptop instances should not be marked as "const" (at this time), since i2c_peripheral is being modified (we change "state" and "tries") when we instantiate devices. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Benson Leung <bleung@chromium.org>
2018-03-08Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-2/+0
Pull virtio bugfix from Michael Tsirkin: "A bugfix for error handling in virtio" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_ring: fix num_free handling in error case
2018-03-08Merge branch 'for-linus' of ↵Linus Torvalds3-11/+9
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - we are reverting patch that was switched touchpad on Lenovo T460P over to native RMI because on these boxes BIOS messes up with SMBus controller state. We might re-enable it later once SMBus issue is resolved - disabling interrupts in matrix_keypad driver was racy - mms114 now has SPDX header and matching MODULE_LICENSE * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: synaptics - Lenovo Thinkpad T460p devices should use RMI" Input: matrix_keypad - fix race when disabling interrupts Input: mms114 - add SPDX identifier Input: mms114 - fix license module information
2018-03-08Revert "Input: synaptics - Lenovo Thinkpad T460p devices should use RMI"Arkadiusz Hiler1-1/+0
This reverts commit 48282969826b3d3c76e908182f69724d86d995fe which caused the following issues: 1. On T460p with BIOS version 2.22 touchpad and trackpoint stop working after suspend-resume cycle. Due to strange state of the device another suspend is impossible. The following dmesg errors can be observed: thinkpad_acpi: EC reports that Thermal Table has changed rmi4_smbus 7-002c: failed to get SMBus version number! rmi4_physical rmi4-00: rmi_driver_reset_handler: Failed to read current IRQ mask. rmi4_f01 rmi4-00.fn01: Failed to restore normal operation: -16. rmi4_f01 rmi4-00.fn01: Resume failed with code -16. rmi4_physical rmi4-00: Failed to suspend functions: -16 rmi4_smbus 7-002c: Failed to resume device: -16 PM: resume devices took 0.640 seconds rmi4_f03 rmi4-00.fn03: rmi_f03_pt_write: Failed to write to F03 TX register (-16). rmi4_physical rmi4-00: rmi_driver_clear_irq_bits: Failed to change enabled interrupts! rmi4_physical rmi4-00: rmi_driver_set_irq_bits: Failed to change enabled interrupts! psmouse: probe of serio3 failed with error -1 2. On another T460p with BIOS version 2.15 two finger scrolling gesture on the touchpad stops working after suspend-resume cycle (about 75% reproducibility, when it still works, the scrolling gesture becomes laggy). Nothing suspicious appears in the dmesg. Analysis form Richard Schütz: "RMI is unreliable on the ThinkPad T460p because the device is affected by the firmware behavior addressed in a7ae81952cda ("i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR")." The affected devices often show: i801_smbus 0000:00:1f.4: BIOS is accessing SMBus registers i801_smbus 0000:00:1f.4: Driver SMBus register access inhibited Reported-by: Richard Schütz <rschuetz@uni-koblenz.de> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Tested-by: Martin Peres <martin.peres@linux.intel.com> Tested-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-08drm/amd/display: validate plane format on primary planeShirish S1-0/+7
In dce110, the plane configuration is such that plane 0 or the primary plane should be rendered with only RGB data. This patch adds the validation to ensure that no video data is rendered on plane 0. Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-08drm/amdgpu:Always save uvd vcpu_bo in VM ModeJames Zhu1-5/+8
When UVD is in VM mode, there is not uvd handle exchanged, uvd.handles are always 0. So vcpu_bo always need save, Otherwise amdgpu driver will fail during suspend/resume. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105021 Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-03-08drm/amdgpu:Correct max uvd handlesJames Zhu1-1/+1
Max uvd handles should use adev->uvd.max_handles instead of AMDGPU_MAX_UVD_HANDLES here. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-03-08drm/amd/display: early return if not in vga mode in disable_vgaEric Yang2-7/+13
The work around for hw bug causes S3 resume failure. Don't execute disable vga logic if not in vga mode. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-08drm/amd/display: Fix takover from VGA modeBhawanpreet Lakha2-2/+18
HW Engineer's Notes: During switch from vga->extended, if we set the VGA_TEST_ENABLE and then hit the VGA_TEST_RENDER_START, then the DCHUBP timing gets updated correctly. Then vBIOS will have it poll for the VGA_TEST_RENDER_DONE and unset VGA_TEST_ENABLE, to leave it in the same state as before. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-08drm/amd/display: Fix memleaks when atomic check fails.Leo (Sunpeng) Li1-10/+21
While checking plane states for updates during atomic check, we create dc_plane_states in preparation. These dc states should be freed if something errors. Although the input transfer function is also freed by dc_plane_state_release(), we should free it (on error) under the same scope as where it is created. Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-08drm/amd/display: Return success when enabling interruptHarry Wentland3-6/+5
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-08drm/amd/display: Use crtc enable/disable_vblank hooksHarry Wentland1-0/+24
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-08drm/amd/display: update infoframe after dig fe is turned onEric Yang1-10/+13
Before dig fe is enabled, infoframe can't be programmed. So in suspend resume case our infoframe programmming was not going through. This change changes the sequence so that infoframe is programmed after. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-08drm/amd/display: fix boot-up on vega10Roman Li1-7/+12
Fixing null-deref on Vega10 due to regression after 'fix cursor related Pstate hang' change. Added null checks in setting cursor position. Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-08drm/amd/display: fix cursor related Pstate hangEric Yang4-66/+90
Move cursor programming to inside the OTG_MASTER_UPDATE_LOCK If graphics plane go from 1 pipe to hsplit, the cursor updates after mpc programming and unlock. Which means there is a window of time where cursor is enabled on the wrong pipe if it's on the right side of the screen (i.e. case where cursor need to move from pipe 0 to pipe 3 post split). This will cause pstate hang. Solution is to program the cursor while still locked. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-08drm/amd/display: Set irq state only on existing crtcsMikita Lipski1-4/+2
Because AMDGPU_CRTC_IRQ_VLINE1 = 6, it expected 6 more crtcs to be programed with disabled irq state in amdgpu_irq_disable_all. That caused errors and accessed the wrong memory location. Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-08drm/amd/display: Fixed non-native modes not lighting upJerry (Fangzhi) Zuo1-1/+3
There is no need to call drm_mode_set_crtcinfo() again once crtc timing is decided. Otherwise non-native/unsupported timing might get overwritten. Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-08drm/amd/display: Call update_stream_signal directly from amdgpu_dmHarry Wentland3-1/+6
There's no good place in DC to cover all place where stream signal should be updated. update_stream_signal depends on timing which comes from DM. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-08drm/amd/display: Make create_stream_for_sink more consistentHarry Wentland1-28/+25
We've got a helper function to call dc_create_stream_for_sink and one other place that calls it directly. Make sure we call the helper functions always since we need to update a bunch of things in stream and don't want to miss that. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-08drm/amd/display: Don't block dual-link DVI modesHarry Wentland1-2/+1
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-01 07:24:57 +0300