summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-03-27drm/i915: Specify which engines to reset following semaphore/event lockupsChris Wilson1-2/+2
If the GPU is stuck waiting for an event or for a semaphore, we need to reset the GPU in order to recover. We have to tell the reset routine which engines we want reset, but we were still using the old interface and declaring it as "not-fatal". Fixes: 14b730fcb8d9 ("drm/i915/tdr: Prepare error handler to accept mask of hung engines") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180320100449.1360-1-chris@chris-wilson.co.uk (cherry picked from commit ca98317b89428e6ac17be0938b467ed78654dd56) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-03-27drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.Dhinakaran Pandiyan1-5/+2
If bios sets up an MST output and hardware state readout code sees this is an SST configuration, when disabling the encoder we end up calling ->post_disable_dp() hook instead of the MST version. Consequently, we write to the DP_SET_POWER dpcd to set it D3 state. Further along when we try enable the encoder in MST mode, POWER_UP_PHY transaction fails to power up the MST hub. This results in continuous link training failures which keep the system busy delaying boot. We could identify bios MST boot discrepancy and handle it accordingly but a simple way to solve this is to write to the DP_SET_POWER dpcd for MST too. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105470 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reported-by: Laura Abbott <labbott@redhat.com> Cc: stable@vger.kernel.org Fixes: 5ea2355a100a ("drm/i915/mst: Use MST sideband message transactions for dpms control") Tested-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180314054825.1718-1-dhinakaran.pandiyan@intel.com (cherry picked from commit ad260ab32a4d94fa974f58262f8000472d34fd5b) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-03-26Merge branch 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie88-737/+60267
into drm-next Last pull for 4.17. Highlights: - Vega12 support - A few more bug fixes and cleanups for powerplay * 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux: (77 commits) drm/amd/pp: clean header file hwmgr.h drm/amd/pp: use mlck_table.count for array loop index limit drm/amdgpu: Add an ATPX quirk for hybrid laptop drm/amdgpu: fix spelling mistake: "asssert" -> "assert" drm/amd/pp: Add new asic support in pp_psm.c drm/amd/pp: Clean up powerplay code on Vega12 drm/amd/pp: Add smu irq handlers for legacy asics drm/amd/pp: Fix set wrong temperature range on smu7 drm/amdgpu: Don't change preferred domian when fallback GTT v5 drm/amdgpu: Fix NULL ptr on driver unload due to init failure. drm/amdgpu: fix "mitigate workaround for i915" drm/amd/pp: Add smu irq handlers in sw_init instand of hw_init drm/amd/pp: Refine register_thermal_interrupt function drm/amdgpu: Remove wrapper layer of cgs irq handling drm/amd/powerplay: Return per DPM level clock drm/amd/powerplay: Remove the SOC floor voltage setting drm/amdgpu: no job timeout setting on compute queues drm/amdgpu: add vega12 pci ids (v2) drm/amd/powerplay: add the hw manager for vega12 (v4) drm/amd/powerplay: add the smu manager for vega12 (v4) ...
2018-03-23drm/amd/pp: clean header file hwmgr.hRex Zhu2-9/+9
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-23drm/amd/pp: use mlck_table.count for array loop index limitColin Ian King1-10/+11
v2: use temporaries to trivially reduces object size. The for-loops process data in the mclk_table but use slck_table.count as the loop index limit. I believe these are cut-n-paste errors from the previous almost identical loops as indicated by static analysis. Fix these. Detected by CoverityScan, CID#1466001 ("Copy-paste error") Fixes: 5d97cf39ff24 ("drm/amd/pp: Add and initialize OD_dpm_table for CI/VI.") Fixes: 5e4d4fbea557 ("drm/amd/pp: Implement edit_dpm_table on smu7") Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-23drm/amdgpu: Add an ATPX quirk for hybrid laptopAlex Deucher1-0/+1
_PR3 doesn't seem to work properly, use ATPX instead. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=104064 Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-03-22Merge tag 'drm-intel-next-fixes-2018-03-22' of ↵Dave Airlie10-41/+119
git://anongit.freedesktop.org/drm/drm-intel into drm-next GVT regression fix that caused guest VM GPU hang. Fix for race conditions in declaring GPU wedged (hit in CI). * tag 'drm-intel-next-fixes-2018-03-22' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915/gvt: force to set all context control bits from guest drm/i915/gvt: Update PDPs after a vGPU mm object is pinned. drm/i915/gvt: Invalidate vGPU PPGTT mm objects during a vGPU reset. drm/i915/kvmgt: Handle kzalloc failure drm/i915/gvt: fix spelling mistake: "destoried" -> "destroyed" drm/i915/gvt: Remove reduntant printing of untracked mmio drm/i915/pmu: Work around compiler warnings on some kernel configs drm/i915: Only call tasklet_kill() on the first prepare_reset drm/i915: Wrap engine->schedule in RCU locks for set-wedge protection drm/i915/icl: do not save DDI A/E sharing bit for ICL
2018-03-22Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux ↵Dave Airlie19-456/+1227
into drm-next A relative large set of various improvements for vmwgfx. Some of them have been around for a while, some are relatively new, but functionality should have been tested in our standalone repo. * 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Bump version patchlevel and date drm/vmwgfx: use monotonic event timestamps drm/vmwgfx: Unpin the screen object backup buffer when not used drm/vmwgfx: Stricter count of legacy surface device resources drm/vmwgfx: Use kasprintf drm/vmwgfx: Get rid of the device-private suspended member drm/vmwgfx: Improve on hibernation drm/vmwgfx: Avoid pinning fbdev framebuffers drm/vmwgfx: Fix multiple command buffer context use drm/vmwgfx: Use the cpu blit utility for framebuffer to screen target blits drm/vmwgfx: Add a cpu blit utility that can be used for page-backed bos drm/ttm: Export the ttm_k[un]map_atomic_prot API. drm/ttm: Clean up kmap_atomic_prot selection code drm/vmwgfx: Cursor update fixes drm/vmwgfx: Send the correct nonblock option for atomic_commit drm/vmwgfx: Move the stdu vblank event to atomic function drm/vmwgfx: Move screen object page flip to atomic function drm/vmwgfx: Remove drm_crtc_arm_vblank_event from atomic flush drm/vmwgfx: Move surface copy cmd to atomic function drm/vmwgfx: Avoid iterating over display unit if crtc is available
2018-03-22Merge branch 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux into ↵Dave Airlie23-455/+1310
drm-next Changes this time mostly come down to: - hook up the DRM GPU scheduler - prep work for GC7000L support, to be completed in the next cycle * 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux: (22 commits) drm/etnaviv: bump HW job limit to 4 drm/etnaviv: etnaviv_sched: Staticize functions when possible drm/etnaviv: add PTA handling to MMUv2 drm/etnaviv: add function to load the initial PTA state drm/etnaviv: handle security states drm/etnaviv: add security handling mode enum drm/etnaviv: add hardware database drm/etnaviv: add more minor features fields drm/etnaviv: update hardware headers from rnndb drm/etnaviv: add support for slave interface clock drm/etnaviv: split out and optimize MMU fault dumping drm/etnaviv: remove the need for a gpu-subsystem DT node dt-bindings: etnaviv: add slave interface clock drm/etnaviv: use correct format specifier for size_t drm/etnaviv: replace hangcheck with scheduler timeout drm/etnaviv: lock BOs after all other submit work is done drm/etnaviv: move dependency handling to scheduler drm/etnaviv: hook up DRM GPU scheduler drm/etnaviv: track fences by IDR instead of seqno drm/etnaviv: add missing major features field to debugfs ...
2018-03-22drm/amdgpu: fix spelling mistake: "asssert" -> "assert"Colin Ian King1-1/+1
Trivial fix to spelling mistake in pr_err error message text Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-22drm/amd/pp: Add new asic support in pp_psm.cRex Zhu6-453/+239
In new asics(vega12), no power state management in driver, So no need to implement related callback functions. and add some ps checks in pp_psm.c Revert "drm/amd/powerplay: add new pp_psm infrastructure for vega12 (v2)" This reverts commit 7d1a63f3aa331b853e41f92d0e7890ed31de8c13. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-22drm/amd/pp: Clean up powerplay code on Vega12Rex Zhu2-513/+1
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-22drm/amd/pp: Add smu irq handlers for legacy asicsRex Zhu1-0/+27
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-22drm/amd/pp: Fix set wrong temperature range on smu7Rex Zhu1-1/+1
Fix the issue thermal irq was always triggered as GPU under temperature range detected The low temp in default thermal policy was set to -273. so need to use int type for the low temp. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-22drm/amdgpu: Don't change preferred domian when fallback GTT v5Chunming Zhou2-17/+17
v2: add sanity checking v3: make code open v4: also handle visible to invisible fallback v5: Since two fallback cases, re-use goto retry Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-22drm/vmwgfx: Bump version patchlevel and dateThomas Hellstrom1-2/+2
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22drm/vmwgfx: use monotonic event timestampsArnd Bergmann1-4/+5
DRM_VMW_EVENT_FENCE_SIGNALED (struct drm_vmw_event_fence) and DRM_EVENT_VBLANK (struct drm_event_vblank) pass timestamps in 32-bit seconds/microseconds format. As of commit c61eef726a78 ("drm: add support for monotonic vblank timestamps"), other DRM drivers use monotonic times for drm_event_vblank, but vmwgfx still uses CLOCK_REALTIME for both events, which suffers from the y2038/y2106 overflow as well as time jumps. For consistency, this changes vmwgfx to use ktime_get_ts64 as well, which solves those problems and avoids the deprecated do_gettimeofday() function. This should be transparent to to user space, as long as it doesn't compare the time against the result of gettimeofday(). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22drm/vmwgfx: Unpin the screen object backup buffer when not usedThomas Hellstrom1-8/+21
We were relying on the pinned screen object backup buffer to be destroyed when not used. But if we hold a copy of the atomic state, like when hibernating, the backup buffer might not be destroyed since it's refcounted by the atomic state. This causes us to hibernate with a buffer pinned in VRAM. Fix this by only having the buffer pinned when it is actually used by a screen object. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2018-03-22drm/vmwgfx: Stricter count of legacy surface device resourcesThomas Hellstrom1-5/+3
For legacy surfaces, they were previously registered as device resources when the driver resources were created. Since they are evictable we instead register them as device resources once they are created on the device, just like for guest-backed surfaces. This has implications during hibernation where we can't hibernate with device resources active. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2018-03-22drm/vmwgfx: Use kasprintfHimanshu Jha1-10/+3
Use kasprintf instead of combination of kmalloc and sprintf. Also, remove the local variables used for storing the string length as they are not required now. Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22drm/vmwgfx: Get rid of the device-private suspended memberThomas Hellstrom3-5/+1
It was used to early block fbdev dirty processing. Replace it with an unprotected check of the par->dirty.active field. While this might race with the vmw_fb_off() function, we do a protected check later so the race will at worst lead to grabbing and releasing a couple of locks. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2018-03-22drm/vmwgfx: Improve on hibernationThomas Hellstrom4-33/+130
Make it possible to hibernate also with masters that don't switch VT at hibernation time. We save and restore modesetting state unless fbdev is active and enabled at hibernation time. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2018-03-22drm/vmwgfx: Avoid pinning fbdev framebuffersThomas Hellstrom5-49/+98
fbdev framebuffers were previously pinned to be able to keep them mapped across updates. This commit introduces a mechanism that instead revalidates the map on each update, keeping the map cached across updates. The cached map is torn down if the underlying pages change. Typically on buffer object moves and swapouts. This should be nicer to the system when we have resource contention. Testing done: Basic fbdev functionality under Fedora 27. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com>
2018-03-22drm/vmwgfx: Fix multiple command buffer context useThomas Hellstrom3-33/+38
The start / stop and preempt commands don't honor the context argument but rather acts on all available contexts. Also add detection for context 1 availability. Note that currently there's no driver interface for submitting buffers using the high-priority command queue (context 1). Testing done: Change the default context for command submission to 1 instead of 0, verify basic desktop functionality including faulty command injection and recovery. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com>
2018-03-22drm/vmwgfx: Use the cpu blit utility for framebuffer to screen target blitsThomas Hellstrom6-91/+97
This blit was previously performed using two large vmaps, one of which was teared down and remapped on each blit. Use the more resource- conserving TTM cpu blit instead. The blit is used in boundary-box computing mode which makes it possible to minimize the bounding box used in host operations. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com>
2018-03-22drm/vmwgfx: Add a cpu blit utility that can be used for page-backed bosThomas Hellstrom3-1/+555
The utility uses kmap_atomic() instead of vmapping the whole buffer object. As a result there will be more book-keeping but on some architectures this will help avoid exhausting vmalloc space and also avoid expensive TLB flushes. The blit utility also adds a provision to compute a bounding box of changed content, which is very useful to optimize presentation speed of ill-behaved applications that don't supply proper damage regions, and for page-flips. The cost of computing the bounding box is not that expensive when done in a cpu-blit utility like this. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com>
2018-03-22drm/ttm: Export the ttm_k[un]map_atomic_prot API.Thomas Hellstrom2-5/+30
It will be used by vmwgfx cpu blit. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Brian Paul <brianp@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22drm/ttm: Clean up kmap_atomic_prot selection codeThomas Hellstrom1-33/+31
Use helpers to perform the kmap_atomic_prot() functionality to a) Avoid in-function ifdefs that violate the kernel coding policy, b) Facilitate exporting the functionality. This commit should not change any functionality. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22drm/etnaviv: bump HW job limit to 4Lucas Stach1-1/+1
The current limit of 2 leads to some GPU idle times, as the usual IRQ latency leads to up to 3 jobs getting signaled at once with some standard workloads. A larger HW job limit might lead to slightly worse QoS, but we accept that to not sacrifice GPU throughput in the common case. Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2018-03-22drm/vmwgfx: Cursor update fixesThomas Hellstrom1-2/+13
Use drm_plane_helper_check_update also for the cursor plane. Some applications, like gdm on gnome shell still uses cursor front-buffer like rendering without notifying the kernel. We do need some kind of noficiation, but work around this for now by updating the cursor image on every cursor move. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com>
2018-03-22drm/vmwgfx: Send the correct nonblock option for atomic_commitDeepak Rawat1-26/+1
Page flip can be slow for vmwgfx in some cases, like need to do surface copy to different surface or waiting for IN_FENCE_FD. Enabling nonblocking commits for vmwgfx in case userspace request it. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22drm/vmwgfx: Move the stdu vblank event to atomic functionDeepak Rawat1-64/+77
Atomic ioctl can also send the same page flip flags as legacy ioctl. In those cases also need to send the vblank event to userspace. vmwgfx does not support flag DRM_MODE_PAGE_FLIP_ASYNC, so this flag is never expected. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22drm/vmwgfx: Move screen object page flip to atomic functionDeepak Rawat1-50/+64
The dmabuf_dirty/surface_dirty in case of screen object is moved to plane atomic update, so that page flip in atomic ioctl also works. vmwgfx does not support DRM_MODE_PAGE_FLIP_ASYNC, so this flag is never expected. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22drm/vmwgfx: Remove drm_crtc_arm_vblank_event from atomic flushDeepak Rawat1-5/+1
The function drm_crtc_arm_vblank_event should be used for the driver which have vblank interrupt support. In case of vmwgfx we do not have vblank interrupt. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22drm/vmwgfx: Move surface copy cmd to atomic functionDeepak Rawat1-25/+22
When display surface is different than the framebuffer surface, atomic path do not copy the surface data. This commit moved the code to copy surface from legacy to atomic path. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22drm/vmwgfx: Avoid iterating over display unit if crtc is availableDeepak Rawat4-26/+56
In case of page flip there is no need to iterate over all display unit in the function "vmw_kms_helper_dirty". If crtc is available then dirty commands is performed on that crtc only. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-21drm/amdgpu: Fix NULL ptr on driver unload due to init failure.Andrey Grodzovsky1-1/+0
Problem: When unloading due to failure amdgpu_device_fini was called twice which was leading to NULL ptr in amdgpu_irq_disable_all. Fix: Call amdgpu_device_fini only once from amdgpu_driver_unload_kms. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-21drm/amdgpu: fix "mitigate workaround for i915"Christian König1-3/+5
Mixed up exporter and importer here. E.g. while mapping the BO we need to check the importer not the exporter. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=105633 Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Mike Lothian <mike@fireburn.co.uk> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-21drm/amd/pp: Add smu irq handlers in sw_init instand of hw_initRex Zhu2-4/+2
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-21drm/amd/pp: Refine register_thermal_interrupt functionRex Zhu9-16/+12
v2: add Vega12 support 1. delete useless argument in function register_thermal_interrupt 2. rename function name register_thermal_interrupt to register_irq_handlers Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-21drm/amdgpu: Remove wrapper layer of cgs irq handlingRex Zhu11-364/+86
v2: add Vega12 support 1. remove struct cgs_os_ops 2. delete cgs_linux.h 3. refine the irq code for vega10, can fix set pp table failed issue. 4. add common smu irq process function Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-21drm/amd/powerplay: Return per DPM level clockKenneth Feng2-96/+276
Add change to return per DPM level clock in DAL interface Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-21drm/amd/powerplay: Remove the SOC floor voltage settingKenneth Feng1-8/+0
Remove W/A carried over from VG10 to set VDDSOC Floor Voltage prior to enabling DPM since the VBIOS covers the floor voltage setting now Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-21drm/amdgpu: no job timeout setting on compute queuesEvan Quan1-1/+3
Under some heavy computing environment(e.g. dgemm test), it takes the asic over 10+ seconds to finish the dispatched job which will trigger the timeout. It's quite confusing although it does not seem to bring any real problems. As a quick workround, we choose to not enfoce the timeout setting on compute queues. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-21drm/amdgpu: add vega12 pci ids (v2)Alex Deucher1-0/+6
v2: add additional pci ids Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-21drm/amd/powerplay: add the hw manager for vega12 (v4)Evan Quan13-2/+5254
handles the driver power state setup v2: squash in the following: - handle negative temperature ranges - add vega12 thermal ranges - use ffs/fls - remove ACG code - resend NumOfDisplays message - correct max dpm levels - remove power containment settings - fix warnings - add sensors interface - delete unused overdrive arbiter - drop get_temperature callback - smu table cleanup - atomfirmware smu dpm table updates v3: rebase v4: rebase Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-21drm/amd/powerplay: add the smu manager for vega12 (v4)Evan Quan3-1/+625
handles the driver interaction with the smu firmware v2: squash in: - s3 fix for firmware loading - smu loading through the psp - unecessary calls to is_smc_ram_running() - smu table cleanups v3: rebase v4: rebase, smu bo allocation fixes, add dpm running callback Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-21drm/amd/powerplay: add new pp_psm infrastructure for vega12 (v2)Evan Quan6-212/+452
New psm infrastructure for vega12. v2: rebase (Alex) Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-21drm/amd/powerplay: update ppatomfwctl (v2)Evan Quan2-0/+152
Add new get_smc_dpm_information api to fetch the smu dpm info from the vbios. v2: deal with updated table format. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-21drm/amd/powerplay: add vega12_pptable.hEvan Quan1-0/+109
Defines the power table format in the vbios. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-12 07:18:02 +0300