| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Remove the field to allow having more queues than MSI-X on VSI. As
default the number will be the same, but if there won't be more MSI-X
available VSI can run with at least one MSI-X.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
With dynamic approach to alloc MSI-X there is no sense to statically
split MSI-X between PF features.
Splitting was also calculating needed MSI-X. Move this part to separate
function and use as max value.
Remove ICE_ESWITCH_MSIX, as there is no need for additional MSI-X for
switchdev.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Use generic devlink PF MSI-X parameter to allow user to change MSI-X
range.
Add notes about this parameters into ice devlink documentation.
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Stack alignment of the kernel in 64-bit mode is 8, not 16, so the
dummy push in xen_hypercall_hvm() for aligning the stack to 16 bytes
can be removed.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
xen_hypercall_hvm() is missing a FRAME_END at the end, add it.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502030848.HTNTTuo9-lkp@intel.com/
Fixes: b4845bb63838 ("x86/xen: add central hypercall functions")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
xen_hypercall_hvm(), which is used when running as a Xen PVH guest at
most only once during early boot, is clobbering %rbx. Depending on
whether the caller relies on %rbx to be preserved across the call or
not, this clobbering might result in an early crash of the system.
This can be avoided by using an already saved register instead of %rbx.
Fixes: b4845bb63838 ("x86/xen: add central hypercall functions")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- add lockdep annotation for relocation root to fix a splat warning
while merging roots
- fix assertion failure when splitting ordered extent after transaction
abort
- don't print 'qgroup inconsistent' message when rescan process updates
qgroup data sooner than the subvolume deletion process
- fix use-after-free (accessing the error number) when attempting to
join an aborted transaction
- avoid starting new transaction if not necessary when cleaning qgroup
during subvolume drop
* tag 'for-6.14-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: avoid starting new transaction when cleaning qgroup during subvolume drop
btrfs: fix use-after-free when attempting to join an aborted transaction
btrfs: do not output error message if a qgroup has been already cleaned up
btrfs: fix assertion failure when splitting ordered extent after transaction abort
btrfs: fix lockdep splat while merging a relocation root
|
|
Linus observed that the symbol_request(utf8_data_table) call fails when
CONFIG_UNICODE=y and CONFIG_TRIM_UNUSED_KSYMS=y.
symbol_get() relies on the symbol data being present in the ksymtab for
symbol lookups. However, EXPORT_SYMBOL_GPL(utf8_data_table) is dropped
due to CONFIG_TRIM_UNUSED_KSYMS, as no module references it in this case.
Probably, this has been broken since commit dbacb0ef670d ("kconfig option
for TRIM_UNUSED_KSYMS").
This commit addresses the issue by leveraging modpost. Symbol names
passed to symbol_get() are recorded in the special .no_trim_symbol
section, which is then parsed by modpost to forcibly keep such symbols.
The .no_trim_symbol section is discarded by the linker scripts, so there
is no impact on the size of the final vmlinux or modules.
This commit cannot resolve the issue for direct calls to __symbol_get()
because the symbol name is not known at compile-time.
Although symbol_get() may eventually be deprecated, this workaround
should be good enough meanwhile.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Clang's -Wformat-overflow and -Wformat-truncation have chosen to check
'%p' unlike GCC but it does not know about the kernel's pointer
extensions in lib/vsprintf.c, so the developers split that part of the
warning out for the kernel to disable because there will always be false
positives.
Commit 908dd508276d ("kbuild: enable -Wformat-truncation on clang") did
disabled these warnings but only in a block that would be called when
W=1 was not passed, so they would appear with W=1. Move the disabling of
the non-kprintf warnings to a block that always runs so that they are
never seen, regardless of warning level.
Fixes: 908dd508276d ("kbuild: enable -Wformat-truncation on clang")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501291646.VtwF98qd-lkp@intel.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Switch to use my kernel.org address for ACPI GPIO work.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20250204114515.3971923-1-mika.westerberg@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
While the Aeroflex Gaisler GRGPIO driver has no build-time dependency on
gpiolib-of, it supports only DT-based configuration, and is used only on
DT systems. Hence add a dependency on OF, to prevent asking the user
about this driver when configuring a kernel without DT support.
Fixes: bc40668def384256 ("gpio: grgpio: drop Kconfig dependency on OF_GPIO")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/db6da3d11bf850d89f199e5c740d8f133e38078d.1738760539.git.geert+renesas@glider.be
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Depending on the user config, the leaf entry may be the hog directory,
not line. Check it and lock the correct item.
Fixes: 8bd76b3d3f3a ("gpio: sim: lock up configfs that an instantiated device depends on")
Tested-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250203110123.87701-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
This reverts commit 56a50667cbcfaf95eea9128d5676af94e54b51a8. Mux
handling is not sufficiently implemented. It needs more time.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
clients"
This reverts commit 3cfe39b3a845593a485ab1c716615979004ef9f6. Mux
handling is not sufficiently implemented. It needs more time.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Use string choices helpers to simplify the code.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501190707.qQS8PGHW-lkp@intel.com/
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make config option R8169_LEDS user-visible, so that users can remove
support if not needed.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/d29f0cdb-32bf-435f-b59d-dc96bca1e3ab@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make config symbol REALTEK_PHY_HWMON user-visible, so that users can
remove support if not needed.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/3466ee92-166a-4b0f-9ae7-42b9e046f333@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new selftest to verify netconsole's handling of messages that
exceed the packet size limit and require fragmentation. The test sends
messages with varying sizes and userdata, validating that:
1. Large messages are correctly fragmented and reassembled
2. Userdata fields are properly preserved across fragments
3. Messages work correctly with and without kernel release version
appending
The test creates a networking environment using netdevsim, sends
messages through /dev/kmsg, and verifies the received fragments maintain
message integrity.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250203-netcons_frag_msgs-v1-1-5bc6bedf2ac0@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Remove unused flexible-array member `buf` and, with this, fix the following
warnings:
drivers/net/ethernet/aquantia/atlantic/aq_hw.h:197:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/ethernet/aquantia/atlantic/hw_atl/../aq_hw.h:197:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Suggested-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://patch.msgid.link/Z6F3KZVfnAZ2FoJm@kspp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Drivers should always disable a NAPI instance before removing it.
If they don't the instance may be queued for polling.
Since commit 86e25f40aa1e ("net: napi: Add napi_config")
we also remove the NAPI from the busy polling hash table
in napi_disable(), so not disabling would leave a stale
entry there.
Use of busy polling is relatively uncommon so bugs may be lurking
in the drivers. Add an explicit warning.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250203215816.1294081-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previous implementation assumes that there is 1:1 matching between
vectors and queues. It isn't always true.
Get minimum value from Rx/Tx queues to determine combined queues number.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This reverts commit
a2b5a9956269 ("drm/amd/display: Use HW lock mgr for PSR1")
Because it may cause system hang while connect with two edp panel.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently, there are several files in drm/amd/display that aim to have a
higher -Wframe-larger-than value to avoid instances of that warning with
a lower value from the user's configuration. However, with the way that
it is currently implemented, it does not respect the user's request via
CONFIG_FRAME_WARN for a higher stack frame limit, which can cause pain
when new instances of the warning appear and break the build due to
CONFIG_WERROR.
Adjust the logic to switch from a hard coded -Wframe-larger-than value
to only using the value as a minimum clamp and deferring to the
requested value from CONFIG_FRAME_WARN if it is higher.
Suggested-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Closes: https://lore.kernel.org/2025013003-audience-opposing-7f95@gregkh/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
lio_get_device_id() has been unused since 2018's
commit 64fecd3ec512 ("liquidio: remove obsolete functions and data
structures")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250203183343.193691-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlxsw_sp_ipip_lb_ul_vr_id() has been unused since 2020's
commit acde33bf7319 ("mlxsw: spectrum_router: Reduce
mlxsw_sp_ipip_fib_entry_op_gre4()")
mlxsw_sp_rif_exists() has been unused since 2023's
commit 49c3a615d382 ("mlxsw: spectrum_router: Replay MACVLANs when RIF is
made")
mlxsw_sp_rif_vid() has been unused since 2023's
commit a5b52692e693 ("mlxsw: spectrum_switchdev: Manage RIFs on PVID
change")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250203190141.204951-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlx5dr_domain_sync() was added in 2019 by
commit 70605ea545e8 ("net/mlx5: DR, Expose APIs for direct rule managing")
but hasn't been used.
Remove it.
mlx5dr_domain_sync() was the only user of
mlx5dr_send_ring_force_drain().
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250203185958.204794-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The last use of mlx4_find_cached_mac() was removed in 2014 by
commit 2f5bb473681b ("mlx4: Add ref counting to port MAC table for RoCE")
mlx4_zone_free_entries() was added in 2014 by
commit 7a89399ffad7 ("net/mlx4: Add mlx4_bitmap zone allocator")
but hasn't been used. (The _unique version is used)
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250203185229.204279-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are some typos in comments/messages:
- Valiate -> Validate
- acceptible -> acceptable
- acces -> access
- relased -> released
Fix them via codespell.
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250203175419.4146-1-algonell@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported a soft lockup in rose_loopback_timer(),
with a repro calling bind() from multiple threads.
rose_bind() must lock the socket to avoid this issue.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+7ff41b5215f0c534534e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/67a0f78d.050a0220.d7c5a.00a0.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250203170838.3521361-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Aspeed device supports rgmii, rgmii-id, rgmii-rxid, rgmii-txid so
document them.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250203151306.276358-2-ninad@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
neigh_parms_destroy() is a simple kfree(), no need for
a forward declaration.
neigh_parms_put() can instead call kfree() directly.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250203151152.3163876-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Firmware deinitialization performs MMIO accesses which are not
necessary if the device has already been removed. In some cases,
these accesses happen via readx_poll_timeout_atomic which ends up
timing out, resulting in a warning at hw_atl2_utils_fw.c:112:
[ 104.595913] Call Trace:
[ 104.595915] <TASK>
[ 104.595918] ? show_regs+0x6c/0x80
[ 104.595923] ? __warn+0x8d/0x150
[ 104.595925] ? aq_a2_fw_deinit+0xcf/0xe0 [atlantic]
[ 104.595934] ? report_bug+0x182/0x1b0
[ 104.595938] ? handle_bug+0x6e/0xb0
[ 104.595940] ? exc_invalid_op+0x18/0x80
[ 104.595942] ? asm_exc_invalid_op+0x1b/0x20
[ 104.595944] ? aq_a2_fw_deinit+0xcf/0xe0 [atlantic]
[ 104.595952] ? aq_a2_fw_deinit+0xcf/0xe0 [atlantic]
[ 104.595959] aq_nic_deinit.part.0+0xbd/0xf0 [atlantic]
[ 104.595964] aq_nic_deinit+0x17/0x30 [atlantic]
[ 104.595970] aq_ndev_close+0x2b/0x40 [atlantic]
[ 104.595975] __dev_close_many+0xad/0x160
[ 104.595978] dev_close_many+0x99/0x170
[ 104.595979] unregister_netdevice_many_notify+0x18b/0xb20
[ 104.595981] ? __call_rcu_common+0xcd/0x700
[ 104.595984] unregister_netdevice_queue+0xc6/0x110
[ 104.595986] unregister_netdev+0x1c/0x30
[ 104.595988] aq_pci_remove+0xb1/0xc0 [atlantic]
Fix this by skipping firmware deinitialization altogether if the
PCI device is no longer present.
Tested with an AQC113 attached via Thunderbolt by performing
repeated unplug cycles while traffic was running via iperf.
Fixes: 97bde5c4f909 ("net: ethernet: aquantia: Support for NIC-specific code")
Signed-off-by: Jacob Moroni <mail@jakemoroni.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250203143604.24930-3-mail@jakemoroni.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
XFRM API makes sure that xs->xso.dev is valid in all XFRM offload
callbacks. There is no need to check it again.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/0b2f8f5f09701bb43bbd83b94bfe5cb506b57adc.1738587150.git.leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The GPIO drivers with latch interrupt support (typically types starting
with PCAL) have interrupt status registers to determine which particular
inputs have caused an interrupt. Unfortunately there is no atomic
operation to read these registers and clear the interrupt. Clearing the
interrupt is done by reading the input registers.
The code was reading the interrupt status registers, and then reading
the input registers. If an input changed between these two events it was
lost.
The solution in this patch is to revert to the non-latch version of
code, i.e. remembering the previous input status, and looking for the
changes. This system results in no more I2C transfers, so is no slower.
The latch property of the device still means interrupts will still be
noticed if the input changes back to its initial state.
Fixes: 44896beae605 ("gpio: pca953x: add PCAL9535 interrupt support for Galileo Gen2")
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240606033102.2271916-1-mark.tomlinson@alliedtelesis.co.nz
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Initramfs building tools such as dracut will look for a MODULE_FIRMWARE()
declaration to determine which firmware to include in the initramfs
when a driver is included in the initramfs.
As amdxdna doesn't declare any firmware this causes the driver to fail
to load with -ENOENT when in the initramfs. Add the missing declaration
for possible firmware.
Reported-by: Renjith Pananchikkal <Renjith.Pananchikkal@amd.com>
Suggested-by: Alexander Deucher <Alexander.Deucher@amd.com>
Fixes: 8c9ff1b181ba ("accel/amdxdna: Add a new driver for AMD AI Engine")
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250204174031.3425762-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204174031.3425762-1-superm1@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull kthreads fix from Frederic Weisbecker:
- Properly handle return value when allocation fails for the preferred
affinity
* tag 'kthreads-fixes-2025-02-04' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks:
kthread: Fix return value on kzalloc() failure in kthread_affine_preferred()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching fix from Petr Mladek:
- Fix livepatching selftests for util-linux-2.40.x
* tag 'livepatching-for-6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
selftests: livepatch: handle PRINTK_CALLER in check_result()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- ideapad-laptop: Pass a correct pointer to the driver data
- intel/ifs: Provide a link to the IFS test images
- intel/pmc: Use large enough type when decoding LTR value
* tag 'platform-drivers-x86-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel/ifs: Update documentation with image download path
platform/x86/intel: pmc: fix ltr decode in pmc_core_ltr_show()
platform/x86: ideapad-laptop: pass a correct pointer to the driver data
|
|
Commit 1c56e9a39833 ("drm/i915/dp: Get optimal link config to have best
compressed bpp") tries to find the best compressed bpp for the
link. However, it iterates from max to min bpp on display 13+, and from
min to max on other platforms. This presumably leads to minimum
compressed bpp always being chosen on display 11-12.
Iterate from high to low on all platforms to actually use the best
possible compressed bpp.
Fixes: 1c56e9a39833 ("drm/i915/dp: Get optimal link config to have best compressed bpp")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: <stable@vger.kernel.org> # v6.7+
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3bba67923cbcd13a59d26ef5fa4bb042b13c8a9b.1738327620.git.jani.nikula@intel.com
(cherry picked from commit 56b0337d429356c3b9ecc36a03023c8cc856b196)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
When waking a VM's NX huge page recovery thread, ensure the thread is
actually alive before trying to wake it. Now that the thread is spawned
on-demand during KVM_RUN, a VM without a recovery thread is reachable via
the related module params.
BUG: kernel NULL pointer dereference, address: 0000000000000040
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:vhost_task_wake+0x5/0x10
Call Trace:
<TASK>
set_nx_huge_pages+0xcc/0x1e0 [kvm]
param_attr_store+0x8a/0xd0
module_attr_store+0x1a/0x30
kernfs_fop_write_iter+0x12f/0x1e0
vfs_write+0x233/0x3e0
ksys_write+0x60/0xd0
do_syscall_64+0x5b/0x160
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f3b52710104
</TASK>
Modules linked in: kvm_intel kvm
CR2: 0000000000000040
Fixes: 931656b9e2ff ("kvm: defer huge page recovery vhost task to later")
Cc: stable@vger.kernel.org
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250124234623.3609069-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The only statement in a kvm_arch_post_init_vm implementation
can be moved into the x86 kvm_arch_init_vm. Do so and remove all
traces from architecture-independent code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There is a spelling mistake in a literal string and in the function
test_get_inital_dirty. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Message-ID: <20250204105647.367743-1-colin.i.king@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.14, take #1
- Correctly clean the BSS to the PoC before allowing EL2 to access it
on nVHE/hVHE/protected configurations
- Propagate ownership of debug registers in protected mode after
the rework that landed in 6.14-rc1
- Stop pretending that we can run the protected mode without a GICv3
being present on the host
- Fix a use-after-free situation that can occur if a vcpu fails to
initialise the NV shadow S2 MMU contexts
- Always evaluate the need to arm a background timer for fully emulated
guest timers
- Fix the emulation of EL1 timers in the absence of FEAT_ECV
- Correctly handle the EL2 virtual timer, specially when HCR_EL2.E2H==0
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
- some selftest fixes
- move some kvm-related functions from mm into kvm
- remove all usage of page->index and page->lru from kvm
- fixes and cleanups for vsie
|
|
SYNTHESIZED_F() generally is used together with setup_force_cpu_cap(),
i.e. when it makes sense to present the feature even if cpuid does not
have it *and* the VM is not able to see the difference. For example,
it can be used when mitigations on the host automatically protect
the guest as well.
The "SYNTHESIZED_F(SRSO_USER_KERNEL_NO)" line came in as a conflict
resolution between the CPUID overhaul from the KVM tree and support
for the feature in the x86 tree. Using it right now does not hurt,
or make a difference for that matter, because there is no
setup_force_cpu_cap(X86_FEATURE_SRSO_USER_KERNEL_NO). However, it
is a little less future proof in case such a setup_force_cpu_cap()
appears later, for a case where the kernel somehow is not vulnerable
but the guest would have to apply the mitigation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The way we deal with the EL2 virtual timer is a bit odd.
We try to cope with E2H being flipped, and adjust which offset
applies to that timer depending on the current E2H value. But that's
a complexity we shouldn't have to worry about.
What we have to deal with is either E2H being RES1, in which case
there is no offset, or E2H being RES0, and the virtual timer simply
does not exist.
Drop the adjusting of the timer offset, which makes things a bit
simpler. At the same time, make sure that accessing the HV timer
when E2H is RES0 results in an UNDEF in the guest.
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250204110050.150560-4-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Both Wei-Lin Chang and Volodymyr Babchuk report that the way we
handle the emulation of EL1 timers with NV is completely wrong,
specially in the case of HCR_EL2.E2H==0.
There are three problems in about as many lines of code:
- With E2H==0, the EL1 timers are overwritten with the EL1 state,
while they should actually contain the EL2 state (as per the timer
map)
- With E2H==1, we run the full EL1 timer emulation even when ECV
is present, hiding a bug in timer_emulate() (see previous patch)
- The comments are actively misleading, and say all the wrong things.
This is only attributable to the code having been initially written
for FEAT_NV, hacked up to handle FEAT_NV2 *in parallel*, and vaguely
hacked again to be FEAT_NV2 only. Oh, and yours truly being a gold
plated idiot.
The fix is obvious: just delete most of the E2H==0 code, have a unified
handling of the timers (because they really are E2H agnostic), and
make sure we don't execute any of that when FEAT_ECV is present.
Fixes: 4bad3068cfa9f ("KVM: arm64: nv: Sync nested timer state with FEAT_NV2")
Reported-by: Wei-Lin Chang <r09922117@csie.ntu.edu.tw>
Reported-by: Volodymyr Babchuk <Volodymyr_Babchuk@epam.com>
Link: https://lore.kernel.org/r/fqiqfjzwpgbzdtouu2pwqlu7llhnf5lmy4hzv5vo6ph4v3vyls@jdcfy3fjjc5k
Link: https://lore.kernel.org/r/87frl51tse.fsf@epam.com
Tested-by: Dmytro Terletskyi <dmytro_terletskyi@epam.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250204110050.150560-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
When updating the interrupt state for an emulated timer, we return
early and skip the setup of a soft timer that runs in parallel
with the guest.
While this is OK if we have set the interrupt pending, it is pretty
wrong if the guest moved CVAL into the future. In that case,
no timer is armed and the guest can wait for a very long time
(it will take a full put/load cycle for the situation to resolve).
This is specially visible with EDK2 running at EL2, but still
using the EL1 virtual timer, which in that case is fully emulated.
Any key-press takes ages to be captured, as there is no UART
interrupt and EDK2 relies on polling from a timer...
The fix is simply to drop the early return. If the timer interrupt
is pending, we will still return early, and otherwise arm the soft
timer.
Fixes: 4d74ecfa6458b ("KVM: arm64: Don't arm a hrtimer for an already pending timer")
Cc: stable@vger.kernel.org
Tested-by: Dmytro Terletskyi <dmytro_terletskyi@epam.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250204110050.150560-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
For each vcpu that userspace creates, we allocate a number of
s2_mmu structures that will eventually contain our shadow S2
page tables.
Since this is a dynamically allocated array, we reallocate
the array and initialise the newly allocated elements. Once
everything is correctly initialised, we adjust pointer and size
in the kvm structure, and move on.
But should that initialisation fail *and* the reallocation triggered
a copy to another location, we end-up returning early, with the
kvm structure still containing the (now stale) old pointer. Weeee!
Cure it by assigning the pointer early, and use this to perform
the initialisation. If everything succeeds, we adjust the size.
Otherwise, we just leave the size as it was, no harm done, and the
new memory is as good as the ol' one (we hope...).
Fixes: 4f128f8e1aaac ("KVM: arm64: nv: Support multiple nested Stage-2 mmu structures")
Reported-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Link: https://lore.kernel.org/r/20250204145554.774427-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The rxrpc_connection attend queue is never used because conn::attend_link
is never initialised and so is always NULL'd out and thus always appears to
be busy. This requires the following fix:
(1) Fix this the attend queue problem by initialising conn::attend_link.
And, consequently, two further fixes for things masked by the above bug:
(2) Fix rxrpc_input_conn_event() to handle being invoked with a NULL
sk_buff pointer - something that can now happen with the above change.
(3) Fix the RXRPC_SKB_MARK_SERVICE_CONN_SECURED message to carry a pointer
to the connection and a ref on it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Fixes: f2cce89a074e ("rxrpc: Implement a mechanism to send an event notification to a connection")
Link: https://patch.msgid.link/20250203110307.7265-3-dhowells@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
