summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-06-17OMAPDSS: output: increase refcount in find_output funcsTomi Valkeinen2-4/+11
Now that omap_dss_output has been combined into omap_dss_device, we can add ref counting for the relevant output functions also. This patch adds omap_dss_get_device() calls to the various find_output() style functions. This, of course, means that the users of those find_output functions need to do a omap_dss_put_device() after use. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: add THIS_MODULE owner to DSS outputsTomi Valkeinen6-0/+6
Setup the owner field for DSS output's omap_dss_device so that module refcounting works. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: add module_get/put to omap_dss_get/put_device()Tomi Valkeinen2-3/+12
omap_dss_get_device() should be called for omap_dss_device before it is used to increase its refcount. Currently we only increase the refcount for the underlying device. This patch adds managing the ref count to the underlying module also, which contains the ops for the omap_dss_device. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: omapdss.h: add owner field to omap_dss_deviceTomi Valkeinen1-0/+2
Add struct module *owner field to omap_dss_device, which points to the module containing the ops for this omap_dss_device. This will be used to manage the ref count for the module. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: combine omap_dss_output into omap_dss_deviceTomi Valkeinen13-102/+96
We currently have omap_dss_device, which represents an external display device, sometimes an external encoder, sometimes a panel. Then we have omap_dss_output, which represents DSS's output encoder. In the future with new display device model, we construct a video pipeline from the display blocks. To accomplish this, all the blocks need to be presented by the same entity. Thus, this patch combines omap_dss_output into omap_dss_device. Some of the fields in omap_dss_output are already found in omap_dss_device, but some are not. This means we'll have DSS output specific fields in omap_dss_device, which is not very nice. However, it is easier to just keep those output specific fields there for now, and after transition to new display device model is made, they can be cleaned up easier than could be done now. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: remove omap_dss_start/stop_device()Tomi Valkeinen8-84/+2
The omap_dss_start_device() and omap_dss_stop_device(), called by the DSS output drivers, are old relics. They originally did something totally else, but nowadays they increase the module ref count for panels that are enabled. This model is quite broken: the panel modules may be used even before they are enabled. For example, configuring the panel requires calls to functions located in the panel modules. In the following patches we try to improve the ref count management for the modules and display devices. The first step, however, is to remove the omap_dss_start/stop_device() totally. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: Add panel dev pointer to dssdevTomi Valkeinen15-206/+212
We are about to remove the dss bus support, which also means that the omap_dss_device won't be a real device anymore. This means that the embedded "dev" struct needs to be removed from omap_dss_device. After we've finished the removal of the dss bus, we see the following changes: - struct omap_dss_device won't be a real Linux device anymore, but more like a "display entity". - struct omap_dss_driver won't be a Linux device driver, but "display entity ops". - The panel devices/drivers won't be omapdss devices/drivers, but platform/i2c/spi/etc devices/drivers, whichever fits the control mechanism of the panel. - The panel drivers will create omap_dss_device and omap_dss_driver, fill the required fields, and register the omap_dss_device to omapdss. - omap_dss_device won't have an embedded dev struct anymore, but a dev pointer to the actual device that manages the omap_dss_device. The model described above resembles the model that has been discussed with CDF (common display framework). For the duration of the conversion, we temporarily have two devs in the dssdev, the old "old_dev", which is a full embedded device struct, and the new "dev", which is a pointer to the device. "old_dev" will be removed in the future. For devices belonging to dss bus the dev is initialized to point to old_dev. This way all the code can just use the dev, for both old and new style panels. Both the new and old style panel drivers work during the conversion, and only after the dss bus support is removed will the old style panels stop to compile. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: implement display sysfs without dss busTomi Valkeinen4-95/+79
We aim to remove the custom omapdss bus totally, as it's quite a strange construct and won't be compatible with common display framework. One problem on the road is that we have sysfs files for each display, and they depend on the omapdss bus. This patch creates the display sysfs files independent of the omapdss bus. This gives us backwards compatibility without using the omapdss bus for the sysfs files. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: don't use dss bus in suspend/resumeTomi Valkeinen1-49/+28
We have support functions to suspend and resume all the displays that are used with system suspend. These functions use the dss bus to iterate the display devices. As we aim to remove the custom dss bus totally, this patch removes the explicit use of dss bus from these functions. Instead the for_each_dss_dev() macro is used to go through the devices. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: use the panel list in omap_dss_get_next_deviceTomi Valkeinen1-15/+39
omap_dss_get_next_device() uses the dss bus to iterate over the displays. This patch changes omap_dss_get_next_device() to use the new panel list instead. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: add panel listTomi Valkeinen3-0/+42
We currently use the omapdss bus (which contains all the available displays) to iterate the displays. As the omapdss bus is on its way out, this needs to be changed. Instead of using the dss bus to iterate displays, this patch adds our own list of displays which we manage. The panels on the dss bus are automatically added to this new list. An "alias" field is also added to omap_dss_device. This field is set to "display%d", the same way as omap_dss_device's dev name is set. This alias is later used to keep backward compatibility, when the embedded dev is no longer used. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: remove dssdev uses in trivial casesTomi Valkeinen4-13/+13
In the future the "dssdev" parameter passed to output drivers will change its meaning. Instead of being a pointer to the panel device, it's a pointer to the output instance. To make the transition easier, some of the uses for this dssdev parameter can be easily removed. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: add videomode conversion supportTomi Valkeinen3-0/+77
Add helper functions to convert between omapdss specific video timings and the common videomode. Eventually omapdss will be changed to use only the common video timings, and these helper functions will make the transition easier. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: VENC: clean up regulator initTomi Valkeinen1-23/+14
Clean up the VENC driver's regulator init to remove the (unused) omap_dss_device parameter, renaming the function to a more sensible name, and making the code slightly clearer. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: SDI: fix regulators for DTTomi Valkeinen1-2/+9
SDI requires a regulator to operate. This regulator is, for some reason, currently attached to the virtual omapdss device, instead of the SDI device. This does not work for DT, as the regulator mappings need to be described in the DT data, and the virtual omapdss device is not present there. Fix the issue by acquiring the regulator in the SDI device. To retain compatibility with the current board files, the old method of getting the regulator is kept. The old method can be removed when the board files have been changed to pass the regulator to SDI. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: SDI: clean up regulator initTomi Valkeinen1-12/+11
Clean up the SDI driver's regulator init to remove the (unused) omap_dss_device parameter, renaming the function to a more sensible name, and making the code slightly clearer. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: HDMI: add hdmi_init_regulatorTomi Valkeinen1-16/+26
Separate regulator init code into its own function for clarity. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: DPI: fix regulators for DTTomi Valkeinen1-2/+9
On some platforms DPI requires a regulator to be enabled to power up the output pins. This regulator is, for some reason, currently attached to the virtual omapdss device, instead of the DPI device. This does not work for DT, as the regulator mappings need to be described in the DT data, and the virtual omapdss device is not present there. Fix the issue by acquiring the regulator in the DPI device. To retain compatibility with the current board files, the old method of getting the regulator is kept. The old method can be removed when the board files have been changed to pass the regulator to DPI. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: DPI: cleanup pll & regulator initTomi Valkeinen1-42/+47
Split regulator and DSI PLL init code to their own functions for clarity. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: DSI: cleanup regulator initTomi Valkeinen1-59/+34
Separate the regulator initialization code to its own function, removing duplicate code. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: CORE: use devm_regulator_getTomi Valkeinen1-12/+2
Use devm_regulator_get() instead of regulator_get() to simplify code. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: Implement display (dis)connect supportTomi Valkeinen9-41/+188
We currently have two steps in panel initialization and startup: probing and enabling. After the panel has been probed, it's ready and can be configured and later enabled. This model is not enough with more complex display pipelines, where we may have, for example, two panels, of which only one can be used at a time, connected to the same video output. To support that kind of scenarios, we need to add new step to the initialization: connect. This patch adds support for connecting and disconnecting panels. After probe, but before connect, no panel ops should be called. When the connect is called, a proper video pipeline is established, and the panel is ready for use. If some part in the video pipeline is already connected (by some other panel), the connect call fails. One key difference with the old style setup is that connect() handles also connecting to the overlay manager. This means that the omapfb (or omapdrm) no longer needs to figure out which overlay manager to use, but it can just call connect() on the panel, and the proper overlay manager is connected by omapdss. This also allows us to add back the support for dynamic switching between two exclusive panels. However, the current panel device model is not changed to support this, as the new device model is implemented in the following patches and the old model will be removed. The new device model supports dynamic switching. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDRM: fix overlay manager handlingTomi Valkeinen5-10/+22
Currently omapdrm creates crtcs, which map directly to DSS overlay managers, only on demand at init time. This would make it difficult to manage connecting the display entities in the future, as the code cannot just search for a suitable overlay manager. We cannot fix this the sane way, which would be to create crtcs for each overlay manager, because we need an overlay for each crtc. With limited number of overlays, that's not possible. So the solution for now is to detach the overlay manager from the crtc. crtcs are still created on demand at init time, but all overlay managers are always initialized by the omapdss. This way we can create and connect whole display pipelines from the overlay manager to the display, regardless of which crtcs omapdrm would create. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: split overlay manager creationTomi Valkeinen4-12/+34
Split the function that creates overlay manager structs into two: one that creates just the structs, and one that creates the sysfs files for the manager. This will help us use the overlay manager structs with omapdrm in the following patches, while still leaving the sysfs files out. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: add helpers to get mgr or output from displayTomi Valkeinen6-13/+43
Add two helper functions that can be used to find either the DSS output or the overlay manager that is connected to the given display. This hides how the output and the manager are actually connected, making it easier to change the connections in the future. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: clean up dss_[ovl|mgr]_get_device()Tomi Valkeinen1-6/+4
Minor cleanup for the dss_[ovl|mgr]_get_device() functions to make them more readable. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: fix dss_get_ctx_loss_count for DTTomi Valkeinen1-1/+2
When using DT, dss device does not have platform data. However, dss_get_ctx_loss_count() uses dss device's platform data to find the get_ctx_loss_count function pointer. To fix this, dss_get_ctx_loss_count() needs to be changed to get the platform data from the omapdss device, which is a "virtual" device and always has platform data. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: add omap_dss_find_output_by_node()Tomi Valkeinen2-0/+14
Add a support function to find a DSS output by given DT node. This is used in later patches to link the panels to DSS outputs. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: add omap_dss_find_output()Tomi Valkeinen2-0/+14
Add a support function to find a DSS output by given name. This is used in later patches to link the panels to DSS outputs. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: only probe pdata if there's oneTomi Valkeinen6-31/+46
omapdss output drivers always read the platform data. This crashes when there's no platform data when using DT. Add a check to read the platform data only if it exists. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: add pdata->default_display_nameTomi Valkeinen2-0/+3
We can currently set the default display (i.e. the initial display) in the omapdss platform data by using a pointer to the default omap_dss_device. Internally omapdss uses the device's name to resolve the default display. As it's difficult to get the omap_dss_device pointer in the future, after we've changed the omapdss device model, this patch adds a new way to define the default display, by using the name of the display. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Archit Taneja <archit@ti.com>
2013-06-09Linux 3.10-rc5v3.10-rc5Linus Torvalds1-1/+1
2013-06-09hpfs: fix warnings when the filesystem fills upMikulas Patocka1-0/+4
This patch fixes warnings due to missing lock on write error path. WARNING: at fs/hpfs/hpfs_fn.h:353 hpfs_truncate+0x75/0x80 [hpfs]() Hardware name: empty Pid: 26563, comm: dd Tainted: P O 3.9.4 #12 Call Trace: hpfs_truncate+0x75/0x80 [hpfs] hpfs_write_begin+0x84/0x90 [hpfs] _hpfs_bmap+0x10/0x10 [hpfs] generic_file_buffered_write+0x121/0x2c0 __generic_file_aio_write+0x1c7/0x3f0 generic_file_aio_write+0x7c/0x100 do_sync_write+0x98/0xd0 hpfs_file_write+0xd/0x50 [hpfs] vfs_write+0xa2/0x160 sys_write+0x51/0xa0 page_fault+0x22/0x30 system_call_fastpath+0x1a/0x1f Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: stable@kernel.org # 2.6.39+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-09Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds4-2/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: - Trivial: unused variable removal - Posix-timers: Add the clock ID to the new proc interface to make it useful. The interface is new and should be functional when we reach the final 3.10 release. - Cure a false positive warning in the tick code introduced by the overhaul in 3.10 - Fix for a persistent clock detection regression introduced in this cycle * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Correct run-time detection of persistent_clock. ntp: Remove unused variable flags in __hardpps posix-timers: Show clock ID in proc file tick: Cure broadcast false positive pending bit warning
2013-06-09Merge tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds3-4/+9
Pull irqdomain bug fixes from Grant Likely: "This branch contains a set of straight forward bug fixes to the irqdomain code and to a couple of drivers that make use of it." * tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux: irqchip: Return -EPERM for reserved IRQs irqdomain: document the simple domain first_irq kernel/irq/irqdomain.c: before use 'irq_data', need check it whether valid. irqdomain: export irq_domain_add_simple
2013-06-09irqchip: Return -EPERM for reserved IRQsGrant Likely2-2/+2
The irqdomain core will report a log message for any attempted map call that fails unless the error code is -EPERM. This patch changes the Versatile irq controller drivers to use -EPERM because it is normal for a subset of the IRQ inputs to be marked as reserved on the various Versatile platforms. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-09irqdomain: document the simple domain first_irqLinus Walleij1-1/+4
The first_irq needs to be zero to get a linear domain and that comes with special semantics. We want to simplify this going forward but some documentation never hurts. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-09kernel/irq/irqdomain.c: before use 'irq_data', need check it whether valid.Chen Gang1-1/+2
Since irq_data may be NULL, if so, we WARN_ON(), and continue, 'hwirq' which related with 'irq_data' has to initialize later, or it will cause issue. Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-09irqdomain: export irq_domain_add_simpleArnd Bergmann1-0/+1
All other irq_domain_add_* functions are exported already, and apparently this one got left out by mistake, which causes build errors for ARM allmodconfig kernels: ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-rcar.ko] undefined! ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-em.ko] undefined! Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-08Merge tag 'fixes-for-linus' of ↵Linus Torvalds15-49/+84
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Another week, another batch of fixes for arm-soc platforms. Nothing controversial here, a handful of fixes for regressions and/or serious problems across several of the platforms. Things are slowing down nicely on fix rates for 3.10" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: exynos: add debug_ll_io_init() call in exynos_init_io() ARM: EXYNOS: uncompress - print debug messages if DEBUG_LL is defined ARM: shmobile: sh73a0: Update CMT clockevent rating to 80 sh-pfc: r8a7779: Don't group USB OVC and PENC pins ARM: mxs: icoll: Fix interrupts gpio bank 0 ARM: imx: clk-imx6q: AXI clock select index is incorrect ARM: bcm2835: override the HW UART periphid ARM: mvebu: Fix bug in coherency fabric low level init function ARM: Kirkwood: TS219: Fix crash by double PCIe instantiation ARM: ux500: Provide supplies for AUX1, AUX2 and AUX3 ARM: ux500: Only configure wake-up reasons on ux500 based platforms ARM: dts: imx: fix clocks for cspi ARM i.MX6q: fix for ldb_di_sels
2013-06-08Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds9-39/+82
Pull MIPS fixes from Ralf Baechle: "MIPS fixes across the field. The only area that's standing out is the exception handling which received it's dose of breakage as part of the microMIPS patchset" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: ralink: add missing SZ_1M multiplier MIPS: Compat: Fix cputime_to_timeval() arguments in compat binfmt_elf. MIPS: OCTEON: Improve _machine_halt implementation. MIPS: rtlx: Fix implicit declaration of function set_vi_handler() MIPS: Trap exception handling fixes MIPS: Quit exposing Kconfig symbols in uapi headers. MIPS: Remove duplicate definition of check_for_high_segbits.
2013-06-08Merge branch 'for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu fix from Greg Ungerer: "A single fix for compilation breakage to many of the ColdFire CPU targets" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: only use local gpio_request_one if not using GPIOLIB
2013-06-08Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds29-68/+188
Pull drm fixes from Dave Airlie: "Regression fixers for the big 3: - nouveau: hdmi audio, dac load detect, s/r regressions fixed - radeon: long standing system hang fixed, hdmi audio and rs780 fast fb fixes - intel: one old regression, a WARN removal, and a stop X dying fix Otherwise one mgag200 fix, a couple of arm build fixes, and a core use after free fix." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nv50/kms: use dac loadval from vbios, where it's available drm/nv50/disp: force dac power state during load detect drm/nv50-nv84/fifo: fix resume regression introduced by playlist race fix drm/nv84/disp: Fix HDMI audio regression drm/i915/sdvo: Use &intel_sdvo->ddc instead of intel_sdvo->i2c for DDC. drm/radeon: don't allow audio on DCE6 drm/radeon: Use direct mapping for fast fb access on RS780/RS880 (v2) radeon: Fix system hang issue when using KMS with older cards drm/i915: no lvds quirk for hp t5740 drm/i915: Quirk the pipe A quirk in the modeset state checker drm/i915: Fix spurious -EIO/SIGBUS on wedged gpus drm/mgag200: Add missing write to index before accessing data register drm/nouveau: use mdelay instead of large udelay constants drm/tilcd: select BACKLIGHT_LCD_SUPPORT drm: fix a use-after-free when GPU acceleration disabled
2013-06-08Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds3-28/+31
Pull slave-dmaengine fixes from Vinod Koul: "Fix from Andy is for dmatest regression reported by Will and Rabin has fixed runtime ref counting for st_dma40" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmatest: do not allow to interrupt ongoing tests dmaengine: ste_dma40: fix pm runtime ref counting
2013-06-08Merge tag 'trace-fixes-v3.10-rc3-v3' of ↵Linus Torvalds5-11/+48
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "This contains 4 fixes. The first two fix the case where full RCU debugging is enabled, enabling function tracing causes a live lock of the system. This is due to the added debug checks in rcu_dereference_raw() that is used by the function tracer. These checks are also traced by the function tracer as well as cause enough overhead to the function tracer to slow down the system enough that the time to finish an interrupt can take longer than when the next interrupt is triggered, causing a live lock from the timer interrupt. Talking this over with Paul McKenney, we came up with a fix that adds a new rcu_dereference_raw_notrace() that does not perform these added checks, and let the function tracer use that. The third commit fixes a failed compile when branch tracing is enabled, due to the conversion of the trace_test_buffer() selftest that the branch trace wasn't converted for. The forth patch fixes a bug caught by the RCU lockdep code where a rcu_read_lock() is performed when rcu is disabled (either going to or from idle, or user space). This happened on the irqsoff tracer as it calls task_uid(). The fix here was to use current_uid() when possible that doesn't use rcu locking. Which luckily, is always used when irqsoff calls this code." * tag 'trace-fixes-v3.10-rc3-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Use current_uid() for critical time tracing tracing: Fix bad parameter passed in branch selftest ftrace: Use the rcu _notrace variants for rcu_dereference_raw() and friends rcu: Add _notrace variation of rcu_dereference_raw() and hlist_for_each_entry_rcu()
2013-06-08Revert "ACPI / scan: do not match drivers against objects having scan handlers"Rafael J. Wysocki1-4/+0
Commit 9f29ab11ddbf ("ACPI / scan: do not match drivers against objects having scan handlers") introduced a boot regression on Tony's ia64 HP rx2600. Tony says: "It panics with the message: Kernel panic - not syncing: Unable to find SBA IOMMU: Try a generic or DIG kernel [...] my problem comes from arch/ia64/hp/common/sba_iommu.c where the code in sba_init() says: acpi_bus_register_driver(&acpi_sba_ioc_driver); if (!ioc_list) { but because of this change we never managed to call ioc_init() so ioc_list doesn't get set up, and we die." Revert it to avoid this breakage and we'll fix the problem it attempted to address later. Reported-by: Tony Luck <tony.luck@gmail.com> Cc: 3.9+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-08Merge tag 'mxs-fixes-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson1-10/+4
into fixes From Shawn Guo, mxs fixes for 3.10: - Since the time we move to MULTI_IRQ_HANDLER, the 0x7f polling for no interrupt in icoll_handle_irq() becomes insane, because 0x7f is an valid interrupt number, the irq of gpio bank 0. That unnecessary polling results in the driver not detecting when irq 0x7f is active which makes the machine effectively dead lock. The fix removes the interrupt poll loop and allows usage of gpio0 interrupt without an infinite loop. * tag 'mxs-fixes-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mxs: icoll: Fix interrupts gpio bank 0 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-08Merge tag 'imx-fixes-3.10-2' of ↵Olof Johansson5-13/+13
git://git.linaro.org/people/shawnguo/linux-2.6 into fixes From Shawn Guo, imx fixes for 3.10, take 2: - One device tree fix for all spi node to have per clock added. The clock is needed by spi driver to calculate bit rate divisor. The spi node in the current device trees either does not have the clock or is defined as dummy clock, in which case the driver probe will fail or spi will run at a wrong bit rate. - Two imx6q clock fixes, which correct axi_sels and ldb_di_sels. * tag 'imx-fixes-3.10-2' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: imx: clk-imx6q: AXI clock select index is incorrect ARM: dts: imx: fix clocks for cspi ARM i.MX6q: fix for ldb_di_sels Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-08ARM: exynos: add debug_ll_io_init() call in exynos_init_io()Doug Anderson1-0/+2
If the early MMU mapping of the UART happens to get booted out of the TLB between the start of paging_init() and when we finally re-add the UART at the very end of s3c_init_cpu(), we'll get a hang at bootup if we've got early_printk enabled. Avoid this hang by calling debug_ll_io_init() early. Without this patch, you can reliably reproduce a hang when early printk is enabled by adding flush_tlb_all() at the start of exynos_init_io(). After this patch the hang goes away. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-08Merge tag 'renesas-fixes-for-v3.10' of ↵Olof Johansson2-10/+37
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes From Simon Horman, Renesas ARM based SoC fixes for v3.10: - Correction to USB OVC and PENC pin groupings on r8a7779 SoC. This avoids conflicts when the USB_OVCn pins are used by another function. This has been observed to be a problem in v3.10-rc1. - Update CMT clock rating for sh73a0 SoC to resolve boot failure on kzm9g-reference. This resolves a regression between v3.9 and v3.10-rc1. * tag 'renesas-fixes-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: sh73a0: Update CMT clockevent rating to 80 sh-pfc: r8a7779: Don't group USB OVC and PENC pins Signed-off-by: Olof Johansson <olof@lixom.net>