summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-12-01media: imon: invalid dereference in imon_touch_eventSean Young1-2/+1
commit f3f5ba42c58d56d50f539854d8cc188944e96087 upstream. The touch timer is set up in intf1. If the second interface does not exist, the timer and touch input device are not setup and we get the following error, when touch events are reported via intf0. kernel BUG at kernel/time/timer.c:956! invalid opcode: 0000 [#1] SMP KASAN CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc1+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__mod_timer kernel/time/timer.c:956 [inline] RIP: 0010:__mod_timer kernel/time/timer.c:949 [inline] RIP: 0010:mod_timer+0x5a2/0xb50 kernel/time/timer.c:1100 Code: 45 10 c7 44 24 14 ff ff ff ff 48 89 44 24 08 48 8d 45 20 48 c7 44 24 18 00 00 00 00 48 89 04 24 e9 5a fc ff ff e8 ae ce 0e 00 <0f> 0b e8 a7 ce 0e 00 4c 89 74 24 20 e9 37 fe ff ff e8 98 ce 0e 00 RSP: 0018:ffff8881db209930 EFLAGS: 00010006 RAX: ffffffff86c2b200 RBX: 00000000ffffa688 RCX: ffffffff83efc583 RDX: 0000000000000100 RSI: ffffffff812f4d82 RDI: ffff8881d2356200 RBP: ffff8881d23561e8 R08: ffffffff86c2b200 R09: ffffed103a46abeb R10: ffffed103a46abea R11: ffff8881d2355f53 R12: dffffc0000000000 R13: 1ffff1103b64132d R14: ffff8881d2355f50 R15: 0000000000000006 FS: 0000000000000000(0000) GS:ffff8881db200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f75e2799000 CR3: 00000001d3b07000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> imon_touch_event drivers/media/rc/imon.c:1348 [inline] imon_incoming_packet.isra.0+0x2546/0x2f10 drivers/media/rc/imon.c:1603 usb_rx_callback_intf0+0x151/0x1e0 drivers/media/rc/imon.c:1734 __usb_hcd_giveback_urb+0x1f2/0x470 drivers/usb/core/hcd.c:1654 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1719 dummy_timer+0x120f/0x2fa2 drivers/usb/gadget/udc/dummy_hcd.c:1965 call_timer_fn+0x179/0x650 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x5e3/0x1490 kernel/time/timer.c:1786 __do_softirq+0x221/0x912 kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x178/0x1a0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x12f/0x500 arch/x86/kernel/apic/apic.c:1137 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830 </IRQ> RIP: 0010:default_idle+0x28/0x2e0 arch/x86/kernel/process.c:581 Code: 90 90 41 56 41 55 65 44 8b 2d 44 3a 8f 7a 41 54 55 53 0f 1f 44 00 00 e8 36 ee d0 fb e9 07 00 00 00 0f 00 2d fa dd 4f 00 fb f4 <65> 44 8b 2d 20 3a 8f 7a 0f 1f 44 00 00 5b 5d 41 5c 41 5d 41 5e c3 RSP: 0018:ffffffff86c07da8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: 0000000000000007 RBX: ffffffff86c2b200 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffffffff86c2ba4c RBP: fffffbfff0d85640 R08: ffffffff86c2b200 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 cpuidle_idle_call kernel/sched/idle.c:154 [inline] do_idle+0x3b6/0x500 kernel/sched/idle.c:263 cpu_startup_entry+0x14/0x20 kernel/sched/idle.c:355 start_kernel+0x82a/0x864 init/main.c:784 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 Modules linked in: Reported-by: syzbot+f49d12d34f2321cf4df2@syzkaller.appspotmail.com Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01media: cxusb: detect cxusb_ctrl_msg error in queryVito Caputo1-1/+2
commit ca8f245f284eeffa56f3b7a5eb6fc503159ee028 upstream. Don't use uninitialized ircode[] in cxusb_rc_query() when cxusb_ctrl_msg() fails to populate its contents. syzbot reported: dvb-usb: bulk message failed: -22 (1/-30591) ===================================================== BUG: KMSAN: uninit-value in ir_lookup_by_scancode drivers/media/rc/rc-main.c:494 [inline] BUG: KMSAN: uninit-value in rc_g_keycode_from_table drivers/media/rc/rc-main.c:582 [inline] BUG: KMSAN: uninit-value in rc_keydown+0x1a6/0x6f0 drivers/media/rc/rc-main.c:816 CPU: 1 PID: 11436 Comm: kworker/1:2 Not tainted 5.3.0-rc7+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events dvb_usb_read_remote_control Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x191/0x1f0 lib/dump_stack.c:113 kmsan_report+0x13a/0x2b0 mm/kmsan/kmsan_report.c:108 __msan_warning+0x73/0xe0 mm/kmsan/kmsan_instr.c:250 bsearch+0x1dd/0x250 lib/bsearch.c:41 ir_lookup_by_scancode drivers/media/rc/rc-main.c:494 [inline] rc_g_keycode_from_table drivers/media/rc/rc-main.c:582 [inline] rc_keydown+0x1a6/0x6f0 drivers/media/rc/rc-main.c:816 cxusb_rc_query+0x2e1/0x360 drivers/media/usb/dvb-usb/cxusb.c:548 dvb_usb_read_remote_control+0xf9/0x290 drivers/media/usb/dvb-usb/dvb-usb-remote.c:261 process_one_work+0x1572/0x1ef0 kernel/workqueue.c:2269 worker_thread+0x111b/0x2460 kernel/workqueue.c:2415 kthread+0x4b5/0x4f0 kernel/kthread.c:256 ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:355 Uninit was stored to memory at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:150 [inline] kmsan_internal_chain_origin+0xd2/0x170 mm/kmsan/kmsan.c:314 __msan_chain_origin+0x6b/0xe0 mm/kmsan/kmsan_instr.c:184 rc_g_keycode_from_table drivers/media/rc/rc-main.c:583 [inline] rc_keydown+0x2c4/0x6f0 drivers/media/rc/rc-main.c:816 cxusb_rc_query+0x2e1/0x360 drivers/media/usb/dvb-usb/cxusb.c:548 dvb_usb_read_remote_control+0xf9/0x290 drivers/media/usb/dvb-usb/dvb-usb-remote.c:261 process_one_work+0x1572/0x1ef0 kernel/workqueue.c:2269 worker_thread+0x111b/0x2460 kernel/workqueue.c:2415 kthread+0x4b5/0x4f0 kernel/kthread.c:256 ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:355 Local variable description: ----ircode@cxusb_rc_query Variable was created at: cxusb_rc_query+0x4d/0x360 drivers/media/usb/dvb-usb/cxusb.c:543 dvb_usb_read_remote_control+0xf9/0x290 drivers/media/usb/dvb-usb/dvb-usb-remote.c:261 Signed-off-by: Vito Caputo <vcaputo@pengaru.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01media: b2c2-flexcop-usb: add sanity checkingOliver Neukum1-0/+3
commit 1b976fc6d684e3282914cdbe7a8d68fdce19095c upstream. The driver needs an isochronous endpoint to be present. It will oops in its absence. Add checking for it. Reported-by: syzbot+d93dff37e6a89431c158@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01media: uvcvideo: Fix error path in control parsing failureLaurent Pinchart1-13/+15
commit 8c279e9394cade640ed86ec6c6645a0e7df5e0b6 upstream. When parsing the UVC control descriptors fails, the error path tries to cleanup a media device that hasn't been initialised, potentially resulting in a crash. Fix this by initialising the media device before the error handling path can be reached. Fixes: 5a254d751e52 ("[media] uvcvideo: Register a v4l2_device") Reported-by: syzbot+c86454eb3af9e8a4da20@syzkaller.appspotmail.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01cpufreq: Add NULL checks to show() and store() methods of cpufreqKai Shen1-0/+6
commit e6e8df07268c1f75dd9215536e2ce4587b70f977 upstream. Add NULL checks to show() and store() in cpufreq.c to avoid attempts to invoke a NULL callback. Though some interfaces of cpufreq are set as read-only, users can still get write permission using chmod which can lead to a kernel crash, as follows: chmod +w /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq This bug was found in linux 4.19. Signed-off-by: Kai Shen <shenkai8@huawei.com> Reported-by: Feilong Lin <linfeilong@huawei.com> Reviewed-by: Feilong Lin <linfeilong@huawei.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Subject & changelog ] Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01media: usbvision: Fix races among open, close, and disconnectAlan Stern1-3/+18
commit 9e08117c9d4efc1e1bc6fce83dab856d9fd284b6 upstream. Visual inspection of the usbvision driver shows that it suffers from three races between its open, close, and disconnect handlers. In particular, the driver is careful to update its usbvision->user and usbvision->remove_pending flags while holding the private mutex, but: usbvision_v4l2_close() and usbvision_radio_close() don't hold the mutex while they check the value of usbvision->remove_pending; usbvision_disconnect() doesn't hold the mutex while checking the value of usbvision->user; and also, usbvision_v4l2_open() and usbvision_radio_open() don't check whether the device has been unplugged before allowing the user to open the device files. Each of these can potentially lead to usbvision_release() being called twice and use-after-free errors. This patch fixes the races by reading the flags while the mutex is still held and checking for pending removes before allowing an open to succeed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01media: vivid: Fix wrong locking that causes race conditions on streaming stopAlexander Popov3-9/+15
commit 6dcd5d7a7a29c1e4b8016a06aed78cd650cd8c27 upstream. There is the same incorrect approach to locking implemented in vivid_stop_generating_vid_cap(), vivid_stop_generating_vid_out() and sdr_cap_stop_streaming(). These functions are called during streaming stopping with vivid_dev.mutex locked. And they all do the same mistake while stopping their kthreads, which need to lock this mutex as well. See the example from vivid_stop_generating_vid_cap(): /* shutdown control thread */ vivid_grab_controls(dev, false); mutex_unlock(&dev->mutex); kthread_stop(dev->kthread_vid_cap); dev->kthread_vid_cap = NULL; mutex_lock(&dev->mutex); But when this mutex is unlocked, another vb2_fop_read() can lock it instead of vivid_thread_vid_cap() and manipulate the buffer queue. That causes a use-after-free access later. To fix those issues let's: 1. avoid unlocking the mutex in vivid_stop_generating_vid_cap(), vivid_stop_generating_vid_out() and sdr_cap_stop_streaming(); 2. use mutex_trylock() with schedule_timeout_uninterruptible() in the loops of the vivid kthread handlers. Signed-off-by: Alexander Popov <alex.popov@linux.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: <stable@vger.kernel.org> # for v3.18 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01media: vivid: Set vid_cap_streaming and vid_out_streaming to trueVandana BN2-6/+0
commit b4add02d2236fd5f568db141cfd8eb4290972eb3 upstream. When vbi stream is started, followed by video streaming, the vid_cap_streaming and vid_out_streaming were not being set to true, which would cause the video stream to stop when vbi stream is stopped. This patch allows to set vid_cap_streaming and vid_out_streaming to true. According to Hans Verkuil it appears that these 'if (dev->kthread_vid_cap)' checks are a left-over from the original vivid development and should never have been there. Signed-off-by: Vandana BN <bnvandana@gmail.com> Cc: <stable@vger.kernel.org> # for v3.18 and up Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01nfc: port100: handle command failure cleanlyOliver Neukum1-1/+1
commit 5f9f0b11f0816b35867f2cf71e54d95f53f03902 upstream. If starting the transfer of a command suceeds but the transfer for the reply fails, it is not enough to initiate killing the transfer for the command may still be running. You need to wait for the killing to finish before you can reuse URB and buffer. Reported-and-tested-by: syzbot+711468aa5c3a1eabf863@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01ALSA: usb-audio: Fix NULL dereference at parsing BADDTakashi Iwai1-0/+3
commit 9435f2bb66874a0c4dd25e7c978957a7ca2c93b1 upstream. snd_usb_mixer_controls_badd() that parses UAC3 BADD profiles misses a NULL check for the given interfaces. When a malformed USB descriptor is passed, this may lead to an Oops, as spotted by syzkaller. Skip the iteration if the interface doesn't exist for avoiding the crash. Fixes: 17156f23e93c ("ALSA: usb: add UAC3 BADD profiles support") Reported-by: syzbot+a36ab65c6653d7ccdd62@syzkaller.appspotmail.com Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191122112840.24797-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01futex: Prevent robust futex exit raceYang Tao1-7/+51
commit ca16d5bee59807bf04deaab0a8eccecd5061528c upstream. Robust futexes utilize the robust_list mechanism to allow the kernel to release futexes which are held when a task exits. The exit can be voluntary or caused by a signal or fault. This prevents that waiters block forever. The futex operations in user space store a pointer to the futex they are either locking or unlocking in the op_pending member of the per task robust list. After a lock operation has succeeded the futex is queued in the robust list linked list and the op_pending pointer is cleared. After an unlock operation has succeeded the futex is removed from the robust list linked list and the op_pending pointer is cleared. The robust list exit code checks for the pending operation and any futex which is queued in the linked list. It carefully checks whether the futex value is the TID of the exiting task. If so, it sets the OWNER_DIED bit and tries to wake up a potential waiter. This is race free for the lock operation but unlock has two race scenarios where waiters might not be woken up. These issues can be observed with regular robust pthread mutexes. PI aware pthread mutexes are not affected. (1) Unlocking task is killed after unlocking the futex value in user space before being able to wake a waiter. pthread_mutex_unlock() | V atomic_exchange_rel (&mutex->__data.__lock, 0) <------------------------killed lll_futex_wake () | | |(__lock = 0) |(enter kernel) | V do_exit() exit_mm() mm_release() exit_robust_list() handle_futex_death() | |(__lock = 0) |(uval = 0) | V if ((uval & FUTEX_TID_MASK) != task_pid_vnr(curr)) return 0; The sanity check which ensures that the user space futex is owned by the exiting task prevents the wakeup of waiters which in consequence block infinitely. (2) Waiting task is killed after a wakeup and before it can acquire the futex in user space. OWNER WAITER futex_wait() pthread_mutex_unlock() | | | |(__lock = 0) | | | V | futex_wake() ------------> wakeup() | |(return to userspace) |(__lock = 0) | V oldval = mutex->__data.__lock <-----------------killed atomic_compare_and_exchange_val_acq (&mutex->__data.__lock, | id | assume_other_futex_waiters, 0) | | | (enter kernel)| | V do_exit() | | V handle_futex_death() | |(__lock = 0) |(uval = 0) | V if ((uval & FUTEX_TID_MASK) != task_pid_vnr(curr)) return 0; The sanity check which ensures that the user space futex is owned by the exiting task prevents the wakeup of waiters, which seems to be correct as the exiting task does not own the futex value, but the consequence is that other waiters wont be woken up and block infinitely. In both scenarios the following conditions are true: - task->robust_list->list_op_pending != NULL - user space futex value == 0 - Regular futex (not PI) If these conditions are met then it is reasonably safe to wake up a potential waiter in order to prevent the above problems. As this might be a false positive it can cause spurious wakeups, but the waiter side has to handle other types of unrelated wakeups, e.g. signals gracefully anyway. So such a spurious wakeup will not affect the correctness of these operations. This workaround must not touch the user space futex value and cannot set the OWNER_DIED bit because the lock value is 0, i.e. uncontended. Setting OWNER_DIED in this case would result in inconsistent state and subsequently in malfunction of the owner died handling in user space. The rest of the user space state is still consistent as no other task can observe the list_op_pending entry in the exiting tasks robust list. The eventually woken up waiter will observe the uncontended lock value and take it over. [ tglx: Massaged changelog and comment. Made the return explicit and not depend on the subsequent check and added constants to hand into handle_futex_death() instead of plain numbers. Fixed a few coding style issues. ] Fixes: 0771dfefc9e5 ("[PATCH] lightweight robust futexes: core") Signed-off-by: Yang Tao <yang.tao172@zte.com.cn> Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1573010582-35297-1-git-send-email-wang.yi59@zte.com.cn Link: https://lkml.kernel.org/r/20191106224555.943191378@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01y2038: futex: Move compat implementation into futex.cArnd Bergmann4-216/+192
commit 04e7712f4460585e5eed5b853fd8b82a9943958f upstream. We are going to share the compat_sys_futex() handler between 64-bit architectures and 32-bit architectures that need to deal with both 32-bit and 64-bit time_t, and this is easier if both entry points are in the same file. In fact, most other system call handlers do the same thing these days, so let's follow the trend here and merge all of futex_compat.c into futex.c. In the process, a few minor changes have to be done to make sure everything still makes sense: handle_futex_death() and futex_cmpxchg_enabled() become local symbol, and the compat version of the fetch_robust_entry() function gets renamed to compat_fetch_robust_entry() to avoid a symbol clash. This is intended as a purely cosmetic patch, no behavior should change. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01nbd: prevent memory leakNavid Emamdoost1-2/+3
commit 03bf73c315edca28f47451913177e14cd040a216 upstream. In nbd_add_socket when krealloc succeeds, if nsock's allocation fail the reallocted memory is leak. The correct behaviour should be assigning the reallocted memory to config->socks right after success. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01x86/speculation: Fix redundant MDS mitigation messageWaiman Long1-0/+13
commit cd5a2aa89e847bdda7b62029d94e95488d73f6b2 upstream. Since MDS and TAA mitigations are inter-related for processors that are affected by both vulnerabilities, the followiing confusing messages can be printed in the kernel log: MDS: Vulnerable MDS: Mitigation: Clear CPU buffers To avoid the first incorrect message, defer the printing of MDS mitigation after the TAA mitigation selection has been done. However, that has the side effect of printing TAA mitigation first before MDS mitigation. [ bp: Check box is affected/mitigations are disabled first before printing and massage. ] Suggested-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Mark Gross <mgross@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20191115161445.30809-3-longman@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01x86/speculation: Fix incorrect MDS/TAA mitigation statusWaiman Long4-5/+35
commit 64870ed1b12e235cfca3f6c6da75b542c973ff78 upstream. For MDS vulnerable processors with TSX support, enabling either MDS or TAA mitigations will enable the use of VERW to flush internal processor buffers at the right code path. IOW, they are either both mitigated or both not. However, if the command line options are inconsistent, the vulnerabilites sysfs files may not report the mitigation status correctly. For example, with only the "mds=off" option: vulnerabilities/mds:Vulnerable; SMT vulnerable vulnerabilities/tsx_async_abort:Mitigation: Clear CPU buffers; SMT vulnerable The mds vulnerabilities file has wrong status in this case. Similarly, the taa vulnerability file will be wrong with mds mitigation on, but taa off. Change taa_select_mitigation() to sync up the two mitigation status and have them turned off if both "mds=off" and "tsx_async_abort=off" are present. Update documentation to emphasize the fact that both "mds=off" and "tsx_async_abort=off" have to be specified together for processors that are affected by both TAA and MDS to be effective. [ bp: Massage and add kernel-parameters.txt change too. ] Fixes: 1b42f017415b ("x86/speculation/taa: Add mitigation for TSX Async Abort") Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: linux-doc@vger.kernel.org Cc: Mark Gross <mgross@linux.intel.com> Cc: <stable@vger.kernel.org> Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20191115161445.30809-2-longman@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01x86/insn: Fix awk regexp warningsAlexander Kapshuk2-4/+4
commit 700c1018b86d0d4b3f1f2d459708c0cdf42b521d upstream. gawk 5.0.1 generates the following regexp warnings: GEN /home/sasha/torvalds/tools/objtool/arch/x86/lib/inat-tables.c awk: ../arch/x86/tools/gen-insn-attr-x86.awk:260: warning: regexp escape sequence `\:' is not a known regexp operator awk: ../arch/x86/tools/gen-insn-attr-x86.awk:350: (FILENAME=../arch/x86/lib/x86-opcode-map.txt FNR=41) warning: regexp escape sequence `\&' is not a known regexp operator Ealier versions of gawk are not known to generate these warnings. The gawk manual referenced below does not list characters ':' and '&' as needing escaping, so 'unescape' them. See https://www.gnu.org/software/gawk/manual/html_node/Escape-Sequences.html for more info. Running diff on the output generated by the script before and after applying the patch reported no differences. [ bp: Massage commit message. ] [ Caught the respective tools header discrepancy. ] Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190924044659.3785-1-alexander.kapshuk@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01ARC: perf: Accommodate big-endian CPUAlexey Brodkin1-2/+2
commit 5effc09c4907901f0e71e68e5f2e14211d9a203f upstream. 8-letter strings representing ARC perf events are stores in two 32-bit registers as ASCII characters like that: "IJMP", "IALL", "IJMPTAK" etc. And the same order of bytes in the word is used regardless CPU endianness. Which means in case of big-endian CPU core we need to swap bytes to get the same order as if it was on little-endian CPU. Otherwise we're seeing the following error message on boot: ------------------------->8---------------------- ARC perf : 8 counters (32 bits), 40 conditions, [overflow IRQ support] sysfs: cannot create duplicate filename '/devices/arc_pct/events/pmji' CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.2.18 #3 Stack Trace: arc_unwind_core+0xd4/0xfc dump_stack+0x64/0x80 sysfs_warn_dup+0x46/0x58 sysfs_add_file_mode_ns+0xb2/0x168 create_files+0x70/0x2a0 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at kernel/events/core.c:12144 perf_event_sysfs_init+0x70/0xa0 Failed to register pmu: arc_pct, reason -17 Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.2.18 #3 Stack Trace: arc_unwind_core+0xd4/0xfc dump_stack+0x64/0x80 __warn+0x9c/0xd4 warn_slowpath_fmt+0x22/0x2c perf_event_sysfs_init+0x70/0xa0 ---[ end trace a75fb9a9837bd1ec ]--- ------------------------->8---------------------- What happens here we're trying to register more than one raw perf event with the same name "PMJI". Why? Because ARC perf events are 4 to 8 letters and encoded into two 32-bit words. In this particular case we deal with 2 events: * "IJMP____" which counts all jump & branch instructions * "IJMPC___" which counts only conditional jumps & branches Those strings are split in two 32-bit words this way "IJMP" + "____" & "IJMP" + "C___" correspondingly. Now if we read them swapped due to CPU core being big-endian then we read "PMJI" + "____" & "PMJI" + "___C". And since we interpret read array of ASCII letters as a null-terminated string on big-endian CPU we end up with 2 events of the same name "PMJI". Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: stable@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01ARM: 8904/1: skip nomap memblocks while finding the lowmem/highmem boundaryChester Lin1-0/+3
commit 1d31999cf04c21709f72ceb17e65b54a401330da upstream. adjust_lowmem_bounds() checks every memblocks in order to find the boundary between lowmem and highmem. However some memblocks could be marked as NOMAP so they are not used by kernel, which should be skipped while calculating the boundary. Signed-off-by: Chester Lin <clin@suse.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01ocfs2: remove ocfs2_is_o2cb_active()Gang He3-10/+1
commit a634644751c46238df58bbfe992e30c1668388db upstream. Remove ocfs2_is_o2cb_active(). We have similar functions to identify which cluster stack is being used via osb->osb_cluster_stack. Secondly, the current implementation of ocfs2_is_o2cb_active() is not totally safe. Based on the design of stackglue, we need to get ocfs2_stack_lock before using ocfs2_stack related data structures, and that active_stack pointer can be NULL in the case of mount failure. Link: http://lkml.kernel.org/r/1495441079-11708-1-git-send-email-ghe@suse.com Signed-off-by: Gang He <ghe@suse.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Reviewed-by: Eric Ren <zren@suse.com> Acked-by: Changwei Ge <ge.changwei@h3c.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01net: phy: dp83867: increase SGMII autoneg timer durationMax Uvarov1-0/+18
commit 1a97a477e666cbdededab93bd3754e508f0c09d7 upstream. After reset SGMII Autoneg timer is set to 2us (bits 6 and 5 are 01). That is not enough to finalize autonegatiation on some devices. Increase this timer duration to maximum supported 16ms. Signed-off-by: Max Uvarov <muvarov@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> [ adapted for kernels without phy_modify_mmd ] Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01net: phy: dp83867: fix speed 10 in sgmii modeMax Uvarov1-0/+19
commit 333061b924539c0de081339643f45514f5f1c1e6 upstream. For supporting 10Mps speed in SGMII mode DP83867_10M_SGMII_RATE_ADAPT bit of DP83867_10M_SGMII_CFG register has to be cleared by software. That does not affect speeds 100 and 1000 so can be done on init. Signed-off-by: Max Uvarov <muvarov@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> [ adapted for kernels without phy_modify_mmd ] Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01mm/memory_hotplug: don't access uninitialized memmaps in shrink_zone_span()David Hildenbrand1-13/+13
commit 7ce700bf11b5e2cb84e4352bbdf2123a7a239c84 upstream. Let's limit shrinking to !ZONE_DEVICE so we can fix the current code. We should never try to touch the memmap of offline sections where we could have uninitialized memmaps and could trigger BUGs when calling page_to_nid() on poisoned pages. There is no reliable way to distinguish an uninitialized memmap from an initialized memmap that belongs to ZONE_DEVICE, as we don't have anything like SECTION_IS_ONLINE we can use similar to pfn_to_online_section() for !ZONE_DEVICE memory. E.g., set_zone_contiguous() similarly relies on pfn_to_online_section() and will therefore never set a ZONE_DEVICE zone consecutive. Stopping to shrink the ZONE_DEVICE therefore results in no observable changes, besides /proc/zoneinfo indicating different boundaries - something we can totally live with. Before commit d0dc12e86b31 ("mm/memory_hotplug: optimize memory hotplug"), the memmap was initialized with 0 and the node with the right value. So the zone might be wrong but not garbage. After that commit, both the zone and the node will be garbage when touching uninitialized memmaps. Toshiki reported a BUG (race between delayed initialization of ZONE_DEVICE memmaps without holding the memory hotplug lock and concurrent zone shrinking). https://lkml.org/lkml/2019/11/14/1040 "Iteration of create and destroy namespace causes the panic as below: kernel BUG at mm/page_alloc.c:535! CPU: 7 PID: 2766 Comm: ndctl Not tainted 5.4.0-rc4 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:set_pfnblock_flags_mask+0x95/0xf0 Call Trace: memmap_init_zone_device+0x165/0x17c memremap_pages+0x4c1/0x540 devm_memremap_pages+0x1d/0x60 pmem_attach_disk+0x16b/0x600 [nd_pmem] nvdimm_bus_probe+0x69/0x1c0 really_probe+0x1c2/0x3e0 driver_probe_device+0xb4/0x100 device_driver_attach+0x4f/0x60 bind_store+0xc9/0x110 kernfs_fop_write+0x116/0x190 vfs_write+0xa5/0x1a0 ksys_write+0x59/0xd0 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 While creating a namespace and initializing memmap, if you destroy the namespace and shrink the zone, it will initialize the memmap outside the zone and trigger VM_BUG_ON_PAGE(!zone_spans_pfn(page_zone(page), pfn), page) in set_pfnblock_flags_mask()." This BUG is also mitigated by this commit, where we for now stop to shrink the ZONE_DEVICE zone until we can do it in a safe and clean way. Link: http://lkml.kernel.org/r/20191006085646.5768-5-david@redhat.com Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319] Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reported-by: Toshiki Fukasawa <t-fukasawa@vx.jp.nec.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Damian Tometzki <damian.tometzki@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Halil Pasic <pasic@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jun Yao <yaojun8558363@gmail.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Pankaj Gupta <pagupta@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qian Cai <cai@lca.pw> Cc: Rich Felker <dalias@libc.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Steve Capper <steve.capper@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Wei Yang <richardw.yang@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Yu Zhao <yuzhao@google.com> Cc: <stable@vger.kernel.org> [4.13+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01md/raid10: prevent access of uninitialized resync_pages offsetJohn Pittman1-1/+1
commit 45422b704db392a6d79d07ee3e3670b11048bd53 upstream. Due to unneeded multiplication in the out_free_pages portion of r10buf_pool_alloc(), when using a 3-copy raid10 layout, it is possible to access a resync_pages offset that has not been initialized. This access translates into a crash of the system within resync_free_pages() while passing a bad pointer to put_page(). Remove the multiplication, preventing access to the uninitialized area. Fixes: f0250618361db ("md: raid10: don't use bio's vec table to manage resync pages") Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: John Pittman <jpittman@redhat.com> Suggested-by: David Jeffery <djeffery@redhat.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01ath9k_hw: fix uninitialized variable dataDenis Efremov1-1/+1
commit 80e84f36412e0c5172447b6947068dca0d04ee82 upstream. Currently, data variable in ar9003_hw_thermo_cal_apply() could be uninitialized if ar9300_otp_read_word() will fail to read the value. Initialize data variable with 0 to prevent an undefined behavior. This will be enough to handle error case when ar9300_otp_read_word() fails. Fixes: 80fe43f2bbd5 ("ath9k_hw: Read and configure thermocal for AR9462") Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: stable@vger.kernel.org Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01ath10k: Fix a NULL-ptr-deref bug in ath10k_usb_alloc_urb_from_pipeHui Peng1-0/+8
commit bfd6e6e6c5d2ee43a3d9902b36e01fc7527ebb27 upstream. The `ar_usb` field of `ath10k_usb_pipe_usb_pipe` objects are initialized to point to the containing `ath10k_usb` object according to endpoint descriptors read from the device side, as shown below in `ath10k_usb_setup_pipe_resources`: for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { endpoint = &iface_desc->endpoint[i].desc; // get the address from endpoint descriptor pipe_num = ath10k_usb_get_logical_pipe_num(ar_usb, endpoint->bEndpointAddress, &urbcount); ...... // select the pipe object pipe = &ar_usb->pipes[pipe_num]; // initialize the ar_usb field pipe->ar_usb = ar_usb; } The driver assumes that the addresses reported in endpoint descriptors from device side to be complete. If a device is malicious and does not report complete addresses, it may trigger NULL-ptr-deref `ath10k_usb_alloc_urb_from_pipe` and `ath10k_usb_free_urb_to_pipe`. This patch fixes the bug by preventing potential NULL-ptr-deref. Signed-off-by: Hui Peng <benquike@gmail.com> Reported-by: Hui Peng <benquike@gmail.com> Reported-by: Mathias Payer <mathias.payer@nebelwelt.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [groeck: Add driver tag to subject, fix build warning] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01KVM: MMU: Do not treat ZONE_DEVICE pages as being reservedSean Christopherson3-7/+28
commit a78986aae9b2988f8493f9f65a587ee433e83bc3 upstream. Explicitly exempt ZONE_DEVICE pages from kvm_is_reserved_pfn() and instead manually handle ZONE_DEVICE on a case-by-case basis. For things like page refcounts, KVM needs to treat ZONE_DEVICE pages like normal pages, e.g. put pages grabbed via gup(). But for flows such as setting A/D bits or shifting refcounts for transparent huge pages, KVM needs to to avoid processing ZONE_DEVICE pages as the flows in question lack the underlying machinery for proper handling of ZONE_DEVICE pages. This fixes a hang reported by Adam Borowski[*] in dev_pagemap_cleanup() when running a KVM guest backed with /dev/dax memory, as KVM straight up doesn't put any references to ZONE_DEVICE pages acquired by gup(). Note, Dan Williams proposed an alternative solution of doing put_page() on ZONE_DEVICE pages immediately after gup() in order to simplify the auditing needed to ensure is_zone_device_page() is called if and only if the backing device is pinned (via gup()). But that approach would break kvm_vcpu_{un}map() as KVM requires the page to be pinned from map() 'til unmap() when accessing guest memory, unlike KVM's secondary MMU, which coordinates with mmu_notifier invalidations to avoid creating stale page references, i.e. doesn't rely on pages being pinned. [*] http://lkml.kernel.org/r/20190919115547.GA17963@angband.pl Reported-by: Adam Borowski <kilobyte@angband.pl> Analyzed-by: David Hildenbrand <david@redhat.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: stable@vger.kernel.org Fixes: 3565fce3a659 ("mm, x86: get_user_pages() for dax mappings") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [sean: backport to 4.x; resolve conflict in mmu.c] Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01Bluetooth: Fix invalid-free in bcsp_close()Tomas Bortoli1-0/+3
commit cf94da6f502d8caecabd56b194541c873c8a7a3c upstream. Syzbot reported an invalid-free that I introduced fixing a memleak. bcsp_recv() also frees bcsp->rx_skb but never nullifies its value. Nullify bcsp->rx_skb every time it is freed. Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com> Reported-by: syzbot+a0d209a4676664613e76@syzkaller.appspotmail.com Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01mm/page_io.c: do not free shared swap slotsVinayak Menon1-3/+4
[ Upstream commit 5df373e95689b9519b8557da7c5bd0db0856d776 ] The following race is observed due to which a processes faulting on a swap entry, finds the page neither in swapcache nor swap. This causes zram to give a zero filled page that gets mapped to the process, resulting in a user space crash later. Consider parent and child processes Pa and Pb sharing the same swap slot with swap_count 2. Swap is on zram with SWP_SYNCHRONOUS_IO set. Virtual address 'VA' of Pa and Pb points to the shared swap entry. Pa Pb fault on VA fault on VA do_swap_page do_swap_page lookup_swap_cache fails lookup_swap_cache fails Pb scheduled out swapin_readahead (deletes zram entry) swap_free (makes swap_count 1) Pb scheduled in swap_readpage (swap_count == 1) Takes SWP_SYNCHRONOUS_IO path zram enrty absent zram gives a zero filled page Fix this by making sure that swap slot is freed only when swap count drops down to one. Link: http://lkml.kernel.org/r/1571743294-14285-1-git-send-email-vinmenon@codeaurora.org Fixes: aa8d22a11da9 ("mm: swap: SWP_SYNCHRONOUS_IO: skip swapcache only if swapped page has no other reference") Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org> Suggested-by: Minchan Kim <minchan@google.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01cfg80211: call disconnect_wk when AP stopsJohannes Berg3-1/+5
[ Upstream commit e005bd7ddea06784c1eb91ac5bb6b171a94f3b05 ] Since we now prevent regulatory restore during STA disconnect if concurrent AP interfaces are active, we need to reschedule this check when the AP state changes. This fixes never doing a restore when an AP is the last interface to stop. Or to put it another way: we need to re-check after anything we check here changes. Cc: stable@vger.kernel.org Fixes: 113f3aaa81bd ("cfg80211: Prevent regulatory restore during STA disconnect in concurrent interfaces") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01ipv6: Fix handling of LLA with VRF and sockets bound to VRFDavid Ahern1-1/+2
[ Upstream commit c2027d1e17582903e368abf5d4838b22a98f2b7b ] A recent commit allows sockets bound to a VRF to receive ipv6 link local packets. However, it only works for UDP and worse TCP connection attempts to the LLA with the only listener bound to the VRF just hang where as before the client gets a reset and connection refused. Fix by adjusting ir_iif for LL addresses and packets received through a device enslaved to a VRF. Fixes: 6f12fa775530 ("vrf: mark skb for multicast or link-local as enslaved to VRF") Reported-by: Donald Sharp <sharpd@cumulusnetworks.com> Cc: Mike Manning <mmanning@vyatta.att-mail.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01mm/memory_hotplug: Do not unlock when fails to take the device_hotplug_lockzhong jiang1-1/+1
[ Upstream commit d2ab99403ee00d8014e651728a4702ea1ae5e52c ] When adding the memory by probing memory block in sysfs interface, there is an obvious issue that we will unlock the device_hotplug_lock when fails to takes it. That issue was introduced in Commit 8df1d0e4a265 ("mm/memory_hotplug: make add_memory() take the device_hotplug_lock") We should drop out in time when fails to take the device_hotplug_lock. Fixes: 8df1d0e4a265 ("mm/memory_hotplug: make add_memory() take the device_hotplug_lock") Reported-by: Yang yingliang <yangyingliang@huawei.com> Signed-off-by: zhong jiang <zhongjiang@huawei.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01i2c: uniphier-f: fix timeout error after reading 8 bytesMasahiro Yamada1-3/+14
[ Upstream commit c2a653deaa81f5a750c0dfcbaf9f8e5195cbe4a5 ] I was totally screwed up in commit eaba68785c2d ("i2c: uniphier-f: fix race condition when IRQ is cleared"). Since that commit, if the number of read bytes is multiple of the FIFO size (8, 16, 24... bytes), the STOP condition could be issued twice, depending on the timing. If this happens, the controller will go wrong, resulting in the timeout error. It was more than 3 years ago when I wrote this driver, so my memory about this hardware was vague. Please let me correct the description in the commit log of eaba68785c2d. Clearing the IRQ status on exiting the IRQ handler is absolutely fine. This controller makes a pause while any IRQ status is asserted. If the IRQ status is cleared first, the hardware may start the next transaction before the IRQ handler finishes what it supposed to do. This partially reverts the bad commit with clear comments so that I will never repeat this mistake. I also investigated what is happening at the last moment of the read mode. The UNIPHIER_FI2C_INT_RF interrupt is asserted a bit earlier (by half a period of the clock cycle) than UNIPHIER_FI2C_INT_RB. I consulted a hardware engineer, and I got the following information: UNIPHIER_FI2C_INT_RF asserted at the falling edge of SCL at the 8th bit. UNIPHIER_FI2C_INT_RB asserted at the rising edge of SCL at the 9th (ACK) bit. In order to avoid calling uniphier_fi2c_stop() twice, check the latter interrupt. I also commented this because it is obscure hardware internal. Fixes: eaba68785c2d ("i2c: uniphier-f: fix race condition when IRQ is cleared") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01spi: omap2-mcspi: Fix DMA and FIFO event trigger size mismatchVignesh R1-2/+2
[ Upstream commit baf8b9f8d260c55a86405f70a384c29cda888476 ] Commit b682cffa3ac6 ("spi: omap2-mcspi: Set FIFO DMA trigger level to word length") broke SPI transfers where bits_per_word != 8. This is because of mimsatch between McSPI FIFO level event trigger size (SPI word length) and DMA request size(word length * maxburst). This leads to data corruption, lockup and errors like: spi1.0: EOW timed out Fix this by setting DMA maxburst size to 1 so that McSPI FIFO level event trigger size matches DMA request size. Fixes: b682cffa3ac6 ("spi: omap2-mcspi: Set FIFO DMA trigger level to word length") Cc: stable@vger.kernel.org Reported-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01nvme-pci: fix surprise removalIgor Konopko1-1/+1
[ Upstream commit 751a0cc0cd3a0d51e6aaf6fd3b8bd31f4ecfaf3e ] When a PCIe NVMe device is not present, nvme_dev_remove_admin() calls blk_cleanup_queue() on the admin queue, which frees the hctx for that queue. Moments later, on the same path nvme_kill_queues() calls blk_mq_unquiesce_queue() on admin queue and tries to access hctx of it, which leads to following OOPS: Oops: 0000 [#1] SMP PTI RIP: 0010:sbitmap_any_bit_set+0xb/0x40 Call Trace: blk_mq_run_hw_queue+0xd5/0x150 blk_mq_run_hw_queues+0x3a/0x50 nvme_kill_queues+0x26/0x50 nvme_remove_namespaces+0xb2/0xc0 nvme_remove+0x60/0x140 pci_device_remove+0x3b/0xb0 Fixes: cb4bfda62afa2 ("nvme-pci: fix hot removal during error handling") Signed-off-by: Igor Konopko <igor.j.konopko@intel.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01PCI: keystone: Use quirk to limit MRRS for K2GKishon Vijay Abraham I1-0/+3
[ Upstream commit 148e340c0696369fadbbddc8f4bef801ed247d71 ] PCI controller in K2G also has a limitation that memory read request size (MRRS) must not exceed 256 bytes. Use the quirk to limit MRRS (added for K2HK, K2L and K2E) for K2G as well. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01pinctrl: zynq: Use define directive for PIN_CONFIG_IO_STANDARDNathan Chancellor1-6/+3
[ Upstream commit cd8a145a066a1a3beb0ae615c7cb2ee4217418d7 ] Clang warns when one enumerated type is implicitly converted to another: drivers/pinctrl/pinctrl-zynq.c:985:18: warning: implicit conversion from enumeration type 'enum zynq_pin_config_param' to different enumeration type 'enum pin_config_param' [-Wenum-conversion] {"io-standard", PIN_CONFIG_IOSTANDARD, zynq_iostd_lvcmos18}, ~ ^~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/pinctrl-zynq.c:990:16: warning: implicit conversion from enumeration type 'enum zynq_pin_config_param' to different enumeration type 'enum pin_config_param' [-Wenum-conversion] = { PCONFDUMP(PIN_CONFIG_IOSTANDARD, "IO-standard", NULL, true), ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/linux/pinctrl/pinconf-generic.h:163:11: note: expanded from macro 'PCONFDUMP' .param = a, .display = b, .format = c, .has_arg = d \ ^ 2 warnings generated. It is expected that pinctrl drivers can extend pin_config_param because of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion isn't an issue. Most drivers that take advantage of this define the PIN_CONFIG variables as constants, rather than enumerated values. Do the same thing here so that Clang no longer warns. Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01pinctrl: lpc18xx: Use define directive for PIN_CONFIG_GPIO_PIN_INTNathan Chancellor1-8/+2
[ Upstream commit f24bfb39975c241374cadebbd037c17960cf1412 ] Clang warns when one enumerated type is implicitly converted to another: drivers/pinctrl/pinctrl-lpc18xx.c:643:29: warning: implicit conversion from enumeration type 'enum lpc18xx_pin_config_param' to different enumeration type 'enum pin_config_param' [-Wenum-conversion] {"nxp,gpio-pin-interrupt", PIN_CONFIG_GPIO_PIN_INT, 0}, ~ ^~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/pinctrl-lpc18xx.c:648:12: warning: implicit conversion from enumeration type 'enum lpc18xx_pin_config_param' to different enumeration type 'enum pin_config_param' [-Wenum-conversion] PCONFDUMP(PIN_CONFIG_GPIO_PIN_INT, "gpio pin int", NULL, true), ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/linux/pinctrl/pinconf-generic.h:163:11: note: expanded from macro 'PCONFDUMP' .param = a, .display = b, .format = c, .has_arg = d \ ^ 2 warnings generated. It is expected that pinctrl drivers can extend pin_config_param because of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion isn't an issue. Most drivers that take advantage of this define the PIN_CONFIG variables as constants, rather than enumerated values. Do the same thing here so that Clang no longer warns. Link: https://github.com/ClangBuiltLinux/linux/issues/140 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01pinctrl: bcm2835: Use define directive for BCM2835_PINCONF_PARAM_PULLNathan Chancellor1-4/+2
[ Upstream commit b40ac08ff886302a6aa457fd72e94a969f50e245 ] Clang warns when one enumerated type is implicitly converted to another: drivers/pinctrl/bcm/pinctrl-bcm2835.c:707:40: warning: implicit conversion from enumeration type 'enum bcm2835_pinconf_param' to different enumeration type 'enum pin_config_param' [-Wenum-conversion] configs[0] = pinconf_to_config_packed(BCM2835_PINCONF_PARAM_PULL, pull); ~~~~~~~~~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~ 1 warning generated. It is expected that pinctrl drivers can extend pin_config_param because of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion isn't an issue. Most drivers that take advantage of this define the PIN_CONFIG variables as constants, rather than enumerated values. Do the same thing here so that Clang no longer warns. Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01pinctrl: qcom: spmi-gpio: fix gpio-hog related boot issuesBrian Masney1-4/+17
[ Upstream commit 149a96047237574b756d872007c006acd0cc6687 ] When attempting to setup up a gpio hog, device probing would repeatedly fail with -EPROBE_DEFERED errors. It was caused by a circular dependency between the gpio and pinctrl frameworks. If the gpio-ranges property is present in device tree, then the gpio framework will handle the gpio pin registration and eliminate the circular dependency. See Christian Lamparter's commit a86caa9ba5d7 ("pinctrl: msm: fix gpio-hog related boot issues") for a detailed commit message that explains the issue in much more detail. The code comment in this commit came from Christian's commit. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01cfg80211: Prevent regulatory restore during STA disconnect in concurrent ↵Sriram R1-1/+5
interfaces [ Upstream commit 113f3aaa81bd56aba02659786ed65cbd9cb9a6fc ] Currently when an AP and STA interfaces are active in the same or different radios, regulatory settings are restored whenever the STA disconnects. This restores all channel information including dfs states in all radios. For example, if an AP interface is active in one radio and STA in another, when radar is detected on the AP interface, the dfs state of the channel will be changed to UNAVAILABLE. But when the STA interface disconnects, this issues a regulatory disconnect hint which restores all regulatory settings in all the radios attached and thereby losing the stored dfs state on the other radio where the channel was marked as unavailable earlier. Hence prevent such regulatory restore whenever another active beaconing interface is present in the same or other radios. Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01tools: bpftool: pass an argument to silence open_obj_pinned()Quentin Monnet2-8/+9
[ Upstream commit f120919f9905a2cad9dea792a28a11fb623f72c1 ] Function open_obj_pinned() prints error messages when it fails to open a link in the BPF virtual file system. However, in some occasions it is not desirable to print an error, for example when we parse all links under the bpffs root, and the error is due to some paths actually being symbolic links. Example output: # ls -l /sys/fs/bpf/ lrwxrwxrwx 1 root root 0 Oct 18 19:00 ip -> /sys/fs/bpf/tc/ drwx------ 3 root root 0 Oct 18 19:00 tc lrwxrwxrwx 1 root root 0 Oct 18 19:00 xdp -> /sys/fs/bpf/tc/ # bpftool --bpffs prog show Error: bpf obj get (/sys/fs/bpf): Permission denied Error: bpf obj get (/sys/fs/bpf): Permission denied # strace -e bpf bpftool --bpffs prog show bpf(BPF_OBJ_GET, {pathname="/sys/fs/bpf/ip", bpf_fd=0}, 72) = -1 EACCES (Permission denied) Error: bpf obj get (/sys/fs/bpf): Permission denied bpf(BPF_OBJ_GET, {pathname="/sys/fs/bpf/xdp", bpf_fd=0}, 72) = -1 EACCES (Permission denied) Error: bpf obj get (/sys/fs/bpf): Permission denied ... To fix it, pass a bool as a second argument to the function, and prevent it from printing an error when the argument is set to true. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01of: unittest: initialize args before calling of_*parse_*()Frank Rowand1-2/+13
[ Upstream commit eeb07c573ec307c53fe2f6ac6d8d11c261f64006 ] Callers of of_irq_parse_one() blindly use the pointer args.np without checking whether of_irq_parse_one() had an error and thus did not set the value of args.np. Initialize args to zero so that using the format "%pOF" to show the value of args.np will show "(null)" when of_irq_parse_one() has an error. This prevents the dereference of a random value. Make the same fix for callers of of_parse_phandle_with_args() and of_parse_phandle_with_args_map(). Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Alan Tull <atull@kernel.org> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01of: unittest: allow base devicetree to have symbol metadataFrank Rowand1-8/+35
[ Upstream commit 5babefb7f7ab1f23861336d511cc666fa45ede82 ] The overlay metadata nodes in the FDT created from testcases.dts are not handled properly. The __fixups__ and __local_fixups__ node were added to the live devicetree, but should not be. Only the first property in the /__symbols__ node was added to the live devicetree if the live devicetree already contained a /__symbols node. All of the node's properties must be added. Tested-by: Alan Tull <atull@kernel.org> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01net: bcmgenet: return correct value 'ret' from bcmgenet_power_downYueHaibing1-1/+1
[ Upstream commit 0db55093b56618088b9a1d445eb6e43b311bea33 ] Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/broadcom/genet/bcmgenet.c: In function 'bcmgenet_power_down': drivers/net/ethernet/broadcom/genet/bcmgenet.c:1136:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] bcmgenet_power_down should return 'ret' instead of 0. Fixes: ca8cf341903f ("net: bcmgenet: propagate errors from bcmgenet_power_down") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01ACPICA: Use %d for signed int print formatting instead of %uColin Ian King1-1/+1
[ Upstream commit f8ddf49b420112e28bdd23d7ad52d7991a0ccbe3 ] Fix warnings found using static analysis with cppcheck, use %d printf format specifier for signed ints rather than %u Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01clk: tegra20: Turn EMC clock gate into dividerDmitry Osipenko1-10/+26
[ Upstream commit 514fddba845ed3a1b17e01e99cb3a2a52256a88a ] Kernel should never gate the EMC clock as it causes immediate lockup, so removing clk-gate functionality doesn't affect anything. Turning EMC clk gate into divider allows to implement glitch-less EMC scaling, avoiding reparenting to a backup clock. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01vrf: mark skb for multicast or link-local as enslaved to VRFMike Manning1-10/+9
[ Upstream commit 6f12fa775530195a501fb090d092c637f32d0cc5 ] The skb for packets that are multicast or to a link-local address are not marked as being enslaved to a VRF, if they are received on a socket bound to the VRF. This is needed for ND and it is preferable for the kernel not to have to deal with the additional use-cases if ll or mcast packets are handled as enslaved. However, this does not allow service instances listening on unbound and bound to VRF sockets to distinguish the VRF used, if packets are sent as multicast or to a link-local address. The fix is for the VRF driver to also mark these skb as being enslaved to the VRF. Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01dlm: don't leak kernel pointer to userspaceTycho Andersen1-1/+1
[ Upstream commit 9de30f3f7f4d31037cfbb7c787e1089c1944b3a7 ] In copy_result_to_user(), we first create a struct dlm_lock_result, which contains a struct dlm_lksb, the last member of which is a pointer to the lvb. Unfortunately, we copy the entire struct dlm_lksb to the result struct, which is then copied to userspace at the end of the function, leaking the contents of sb_lvbptr, which is a valid kernel pointer in some cases (indeed, later in the same function the data it points to is copied to userspace). It is an error to leak kernel pointers to userspace, as it undermines KASLR protections (see e.g. 65eea8edc31 ("floppy: Do not copy a kernel pointer to user memory in FDGETPRM ioctl") for another example of this). Signed-off-by: Tycho Andersen <tycho@tycho.ws> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01dlm: fix invalid freeTycho Andersen1-2/+3
[ Upstream commit d968b4e240cfe39d39d80483bac8bca8716fd93c ] dlm_config_nodes() does not allocate nodes on failure, so we should not free() nodes when it fails. Signed-off-by: Tycho Andersen <tycho@tycho.ws> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01usb: typec: tcpm: charge current handling for sink during hard resetBadhri Jagan Sridharan1-1/+8
[ Upstream commit 157c0f2f641a9938382b092c64548ebdabfe25e0 ] During the initial connect to a non-pd port, sink would hard reset twice before deeming that the port partner is non-pd. TCPM sets the the charge path to false during the hard reset. This causes unnecessary connects/disconnects of charge path and makes port take longer to charge from the non-pd ports. Avoid this by not setting the charge path to false unless the partner has already identified to be pd capable. When partner is a pd port, set the charge path to false in SNK_HARD_RESET_SINK_OFF. Set the current limits to default value based of CC pull up and resume the charge path when port enters SNK_HARD_RESET_SINK_ON. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> -------- Changes in V3: Rebase on top of usb-next Changes in V2: Based on feedback of jackp@codeaurora.org - vsafe_5v_hard_reset flag from tcpc_config is removed - Patch only differentiates between pd port partner and non-pd port partner V1 version of the patch is here: https://lkml.org/lkml/2018/9/14/11 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-15 12:19:20 +0300