summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-09-19Merge tag 'omap-for-v4.9/dt-pt2-signed' of ↵Arnd Bergmann15-943/+731
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Pull "omap dts updates for v4.9 merge window, part 2" from Tony Lindgren: Part two of device tree changes for omaps for v4.9 merge window. This is mostly usability and non-critical fixes except for the addition of beagleboard-x15 rev B1 support: - Fix omap4 pandaboard SDIO WLAN latencies in idle mode by enabling wakeirq - Usability fixes for WLAN, USB, LEDs and power button on omap5 boards - Remove am57xx beagleboard-x15 pinmux configuration as the processor requires that it's done in IO isolation in bootloader except for MMC and DCAN - Add support for beagleboard-x15 rev B1 by moving most of the configuration to am57xx-beagle-x15-common.dtsi - Enable support for more than 2GB of memory for omap5 with LPAE with #address-cells - Fix omap3-gta04 backlight PWM frequency until the PWM driver - Revert am335x dts changes related to cpufreq as the driver changes still have not merged and the dts changes broke cpufreq * tag 'omap-for-v4.9/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: Revert "ARM: dts: dra7: Move to operating-points-v2 table" Revert "ARM: dts: am33xx: Move to operating-points-v2 table and ti-cpufreq driver" Revert "ARM: dts: am335x-boneblack: Enable 1GHz OPP for cpu" ARM: dts: omap3-gta04: reduce panel backlight PWM frequency to 83Hz ARM: dts: Add support for more than 2GB of memory for omap5 ARM: dts: am57xx-beagle-x15: Add support for rev B1 ARM: dts: am57xx-beagle-x15: Remove pinmux configurations for erratum i869 ARM: dts: Fix LEDs for igepv5 ARM: dts: Add power button support for igepv5 ARM: dts: Configure omap5 OTG ID pin ARM: dts: ARM: dts: Fix omap5 SDIO dat1 interrupt ARM: dts: Configure panda SDIO WLAN wakeirq
2016-09-19Merge tag 'davinci-for-v4.9/dts-p2' of ↵Arnd Bergmann1-0/+83
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt Pull "DaVinci DTS updates for v4.9 (part 2)" from Sekhar Nori: This pull request adds NAND support to DA850 based LCDK board. * tag 'davinci-for-v4.9/dts-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: dts: da850-lcdk: Add NAND to DT
2016-09-19Merge tag 'sti-dt-for-v4.9-3' of ↵Arnd Bergmann5-37/+57
git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into next/dt Pull "STi clock improvement for video playback" from Patrice Chotard: This serie allows to increase video resolutions and make audio adjustment during a video playback for STiH407 family socs. * tag 'sti-dt-for-v4.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti: ARM: dts: STiH410: clock configuration to address 720p and 1080p ARM: dts: STi: STiH407: clock configuration to address 720p and 1080p ARM: dts: STiH418: Enable synchronous clock mode for video clocks ARM: dts: STiH410: Enable synchronous clock mode for video clocks ARM: dts: STiH407: Enable synchronous clock mode for video clocks ARM: dts: STiH418: Enable clock propagation for audio clocks ARM: dts: STiH410: Enable clock propagation for audio clocks ARM: dts: STiH407: Enable clock propagation for audio clocks ARM: dts: STiH4xx: Simplify clock binding of STiH4xx platforms
2016-09-19Merge tag 'sti-dt-for-v4.9-2' of ↵Arnd Bergmann10-69/+362
git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into next/dt Pull "STi dts update" from Patrice Chotard: Update gpio-cells and gpio specifier for STiH415/416 Add PWM capture support for STiH416 and STiH407 family Add USB3 support for B2260 Add HVA support for STiH410 Add clk_ignore_unused in bootargs of B2260 Add Flexible Direct Memory Access (FDMA) support for STiH407 family Add internal audio codec IP spport for STiH407 family Add uniperif player/reader IP blocks for STiH407 family * tag 'sti-dt-for-v4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti: (22 commits) ARM: DT: STi: stihxxx-b2120: Add DT nodes for STi audio card ARM: STi: DT: STiH407: Add uniperif reader dt nodes ARM: STi: DT: STiH407: Add uniperif player dt nodes ARM: STi: DT: STiH407: Add sti-sasg-codec dt node ARM: DT: STiH407: Add spdif_out pinctrl config ARM: DT: STiH407: Add i2s_in pinctrl configuration ARM: DT: STiH407: Add i2s_out pinctrl configuration ARM: STi: DT: STiH407: Add FDMA driver dt nodes. ARM: dts: STiH410: Add hva dt nodes ARM: dts: STiH410-b2260: add clk_ignore_unused in bootargs ARM: dts: STiH410-b2260: add USB3 node ARM: dts: STiH416: Define the number of PWM Capture channels ARM: dts: STiH416: Define PWM Capture clock ARM: dts: STiH416: Declare PWM Capture data lines via Pinctrl ARM: dts: STiH416: Supply PWM Capture IRQs ARM: dts: STiH407: Declare PWM Capture data lines via Pinctrl ARM: dts: STiH407: Supply PWM Capture IRQ ARM: dts: STiH416-b2020e: update gpio specifier ARM: dts: STiH41x-b2000: update gpio specifier ARM: dts: STiHxxx-b2120: update gpio specifier ...
2016-09-19Merge tag 'amlogic-dt' of ↵Arnd Bergmann1-0/+21
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Pull "Amlogic DT updates for v4.9" from Kevin Hilman: - add PWM support * tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8b: Add Meson8b PWM Controller nodes
2016-09-19Merge tag 'mvebu-dt-4.9-2' of git://git.infradead.org/linux-mvebu into next/dtArnd Bergmann6-24/+328
Pull "mvebu dt for 4.9 (part 2)" from Gregory CLEMENT: - convert orion5x based SoC Netgear WNR854T to devicetree - remove obsolete orion-gpio binding description * tag 'mvebu-dt-4.9-2' of git://git.infradead.org/linux-mvebu: ARM: dts: orion5x: Configure WNR854T ethernet PHY LEDs ARM: dts: orion5x: Add description for Netgear WNR854T ARM: dts: arm: orion5x: Add DT include for mv88f5181 dt-bindings: arm: add DT binding for Marvell Orion5x SoC family ARM: dts: orion5x: Add required properties for orion-wdt to DT node dt-binding: mrvl-gpio: remove orion-gpio description
2016-09-19Merge tag 'at91-ab-4.9-dt1' of ↵Arnd Bergmann1-0/+29
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt Pull "DT Changes for 4.9" from Alexandre Belloni: - add ETM and ETB nodes on sama5d2 * tag 'at91-ab-4.9-dt1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: dts: at91: sama5d2: add ETM and ETB nodes
2016-09-16ARM: dts: STiH410: clock configuration to address 720p and 1080pGabriel Fernandez1-3/+13
It is necessary to properly configure these clocks in order to address 720p and 1080p HDMI resolution. Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org>
2016-09-16ARM: dts: STi: STiH407: clock configuration to address 720p and 1080pGabriel Fernandez1-3/+13
It is necessary to properly configure these clocks in order to address 720p and 1080p HDMI resolution. Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org>
2016-09-16ARM: dts: STiH418: Enable synchronous clock mode for video clocksGabriel Fernandez1-1/+1
This patch enables the synchronous clock mode for video clocks on STiH418 board. Signed-off-by: Olivier Bideau <olivier.bideau@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org>
2016-09-16ARM: dts: STiH410: Enable synchronous clock mode for video clocksGabriel Fernandez1-1/+1
This patch enables the synchronous clock mode for video clocks on STiH410 board. Signed-off-by: Olivier Bideau <olivier.bideau@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org>
2016-09-16ARM: dts: STiH407: Enable synchronous clock mode for video clocksGabriel Fernandez1-1/+1
This patch enables the synchronous clock mode for video clocks on STiH407 board. Signed-off-by: Olivier Bideau <olivier.bideau@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org>
2016-09-16ARM: dts: STiH418: Enable clock propagation for audio clocksGabriel Fernandez1-1/+1
This patch is used in the clock driver to apply a clock propagation flag on the audio clocks of STiH418 Signed-off-by: Olivier Bideau <olivier.bideau@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org>
2016-09-16ARM: dts: STiH410: Enable clock propagation for audio clocksGabriel Fernandez1-1/+1
This patch is used in the clock driver to apply a clock propagation flag on the audio clocks of STiH410 Signed-off-by: Olivier Bideau <olivier.bideau@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org>
2016-09-16ARM: dts: STiH407: Enable clock propagation for audio clocksGabriel Fernandez1-1/+1
This patch is used in the clock driver to apply a clock propagation flag on the audio clocks of STiH407 Signed-off-by: Olivier Bideau <olivier.bideau@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org>
2016-09-16ARM: dts: STiH4xx: Simplify clock binding of STiH4xx platformsGabriel Fernandez3-25/+25
This patch simplifies the clock binding because we had too much detail. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
2016-09-15ARM: dts: da850-lcdk: Add NAND to DTKarl Beldan1-0/+83
This adds DT support for the NAND connected to the SoC AEMIF. Passed torture hashing a 40MB file on top of UBIFS using subpages. Signed-off-by: Karl Beldan <kbeldan@baylibre.com> [khilman: add back default partitions from an earlier patch] Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-09-15Merge tag 'davinci-for-v4.9/dts' of ↵Arnd Bergmann6-34/+239
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt Pull "DaVinci DA850 device-tree enhancements include" from Sekhar Nori: - Support for new board OMAP-L138 LCDK - Add AEMIF node on DA850 EVM and use it for NAND - Audio support for LCDK - Cleanups for PWM and UART * tag 'davinci-for-v4.9/dts' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: dts: da850-lcdk: Audio support via simple-card ARM: dts: da850,da850-evm: Add an aemif node and use it for the NAND ARM: dts: da850: Add basic DTS for the LCDK ARM: dts: da850: Add missing pin muxing for the UARTs ARM: dts: da850: Add new ECAP and EPWM bindings
2016-09-15Merge branch 'am335x-cpufreq-regression' into omap-for-v4.9/dt-v2Tony Lindgren4-108/+18
2016-09-15Revert "ARM: dts: dra7: Move to operating-points-v2 table"Dave Gerlach2-22/+5
This reverts commit f80bc97fd0a9711ef11bdb3e63c2c01115a82c47. The original commit updated the cpufreq operating points tables for dra7xx but was merged before the driver making use of the node was merged, which breaks the existing cpufreq implementation on the system, so revert the patch until the ti-cpufreq driver is merged. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-09-15Revert "ARM: dts: am33xx: Move to operating-points-v2 table and ti-cpufreq ↵Dave Gerlach1-75/+13
driver" This reverts commit 4317be1162108bcdf50dc53dfb48eac94dcff25c. The original commit updated the cpufreq operating points tables for am33xx but was merged before the driver making use of the node was merged, which breaks the existing cpufreq implementation on the system, so revert the patch until the ti-cpufreq driver is merged. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-09-15Revert "ARM: dts: am335x-boneblack: Enable 1GHz OPP for cpu"Dave Gerlach1-11/+0
This reverts commit c36e6ec904876de1935b1d74d2d711e6f5ceb572. The original commit updated the cpufreq operating points tables for am335x-boneblack but was merged before the driver making use of the node was merged, which breaks the existing cpufreq implementation on the system, so revert the patch until the ti-cpufreq driver is merged. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-09-15Merge tag 'arm-soc/for-4.9/devicetree' of ↵Arnd Bergmann23-3/+1093
http://github.com/Broadcom/stblinux into next/dt Pull "Broadcom devicetree changes for 4.9" from Florian Fainelli: This pull request contains Broadcom ARM-based Device Tree changes for v4.9, please pull the following: - Jon adds support for the Ethernet MAC DT nodes (AMAC) and provides the following updates for Broadcom references boards: * New Northstar Plus reference boards added: BCM958525er, BCM958522er, BCM988312hr, BCM958623hr and BCM958622hr * Add SATA nodes to the BCM958625hr and XMC boards * Add I2C nodes to the XMC board * Fixes the amount of RAM on BCM958625HR, BCM958625K and BCM958525XMC boards * Add the GPIO reboot method for BCM958625hr and XMC boards - Dhanajay adds PWM nodes for the Northstar Plus SoCs - Rafal adds the USB 2.0 PHY to the BCM5301x Device Tree file include - Stefan adds a missing USB clock to the BCM283x DT files, adds a DTSI file for the USB host mode on BCM283x and finally documents and adds support for the Raspberry Pi Zero - Florian adds support for the Northstar Plus Switch Register Access block which enables the integrated switch on these SoCs and enables the switch ports on the BCM958625HR reference board * tag 'arm-soc/for-4.9/devicetree' of http://github.com/Broadcom/stblinux: (22 commits) ARM: dts: bcm2835: Add Raspberry Pi Zero DT: bindings: bcm: Add Raspberry Pi Zero ARM: dts: bcm283x: Add dtsi for USB host mode ARM: dts: bcm283x: Add missing USB clock ARM: dts: NSP: Add new DT file for bcm958622hr ARM: dts: NSP: Add new DT file for bcm958623hr ARM: dts: NSP: Add new DT file for bcm988312hr ARM: dts: NSP: Add new DT file for bcm958522er ARM: dts: NSP: Add new DT file for bcm958525er ARM: dts: NSP: Add GPIO reboot method to bcm958625xmc DTS file ARM: dts: NSP: Add GPIO reboot method to bcm958625hr DTS file ARM: dts: NSP: Specify RAM amount for BCM958525XMC board ARM: dts: NSP: Specify RAM amount for BCM958625K board ARM: dts: NSP: Enable SATA and add i2c devices on XMC ARM: dts: NSP: Enable SATA on bcm958625hr ARM: dts: NSP: Correct RAM amount for BCM958625HR board ARM: dts: NSP: Add PWM Support to DT ARM: BCM5301X: Specify PHY of USB 2.0 in DT ARM: dts: NSP: Add BCM958625HR switch ports ARM: dts: NSP: Add Switch Register Access Block node ...
2016-09-14ARM: dts: omap3-gta04: reduce panel backlight PWM frequency to 83HzH. Nikolaus Schaller1-1/+1
This helps to get 100% intensity closer to "always on". It compensates for an effect of dmtimer which at 100% still emits short "off" impulses and the startup-time of the DC/DC converter makes backlight intensity not reach full scale. The lower the PWM frequency is, the smaller is this effect. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-09-14ARM: dts: orion5x: Configure WNR854T ethernet PHY LEDsJamie Lentin1-0/+51
The default PHY configuration disables most of the LEDs. The following configures the ethernet activity LEDs as Netgear intended. [gregory.clement@free-electrons.com: fix commit title] Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-09-14ARM: dts: orion5x: Add description for Netgear WNR854TJamie Lentin3-0/+202
This is a router based on the mv88f5181 chipset. http://www.netgear.com/support/product/WNR854T.aspx http://wiki.openwrt.org/toh/netgear/wnr854t [gregory.clement@free-electrons.com: - extract dt part from "arm: orion5x: Add DT-based support for Netgear WNR854T" - squashed "arm: orion5x: Alias uart0 to serial0 for all orion5x" into this commit and move serial0 alias from dtsi to dts] Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-09-14ARM: dts: arm: orion5x: Add DT include for mv88f5181Jamie Lentin2-0/+50
Common definitions for the SoC for board definitions to use. [gregory.clement@free-electrons.com: fix commit title] Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-09-14dt-bindings: arm: add DT binding for Marvell Orion5x SoC familyJamie Lentin1-0/+23
Copy the format for kirkwood/dove to orion5x [gregory.clement@free-electrons.com: fix commit title] Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-09-14ARM: dts: orion5x: Add required properties for orion-wdt to DT nodeJamie Lentin1-1/+2
orion-wdt refuses to start without these properties defined, so lift definitions out of kirkwood/dove.dtsi [gregory.clement@free-electrons.com: fix commit title] Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-09-14dt-binding: mrvl-gpio: remove orion-gpio descriptionBaruch Siach1-23/+0
The Orion GPIO controller binding description in mrvl-gpio.txt is obsolete, and duplicates the description in gpio-mvebu.txt. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-09-14ARM: DT: STi: stihxxx-b2120: Add DT nodes for STi audio cardPeter Griffin1-0/+45
This patch enables the uniperif players 2 & 3 for b2120 boards and also adds the "simple-audio-card" device node to interconnect the SoC sound device and the codec. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
2016-09-14ARM: STi: DT: STiH407: Add uniperif reader dt nodesPeter Griffin1-0/+28
This patch adds the DT node for the uniperif reader IP block found on STiH407 family silicon. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
2016-09-14ARM: STi: DT: STiH407: Add uniperif player dt nodesPeter Griffin1-0/+80
This patch adds the DT nodes for the uniperif player IP blocks found on STiH407 family silicon. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
2016-09-14ARM: STi: DT: STiH407: Add sti-sasg-codec dt nodePeter Griffin1-0/+7
This patch adds the dt node for the internal audio codec IP. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
2016-09-14ARM: DT: STiH407: Add spdif_out pinctrl configPeter Griffin1-0/+8
This patch adds the pinctrl config for the spidf out pins used by the sasg codec IP. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org>
2016-09-14ARM: DT: STiH407: Add i2s_in pinctrl configurationPeter Griffin1-0/+24
This patch adds the pinctrl config for the i2s_in pins used by the uniperif reader IP. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org>
2016-09-14ARM: DT: STiH407: Add i2s_out pinctrl configurationPeter Griffin1-0/+23
This patch adds the pinctrl config for the i2s_out pins used by the uniperif player IP. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org>
2016-09-14ARM: STi: DT: STiH407: Add FDMA driver dt nodes.Peter Griffin1-0/+52
These nodes are required to get the fdma driver working on STiH407 based silicon. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org>
2016-09-14ARM: dts: Add support for more than 2GB of memory for omap5Tony Lindgren4-14/+14
Some omap5 variants have more than 2GB of memory available as optional models. Let's update the dts files to use two address cells similar to what dra7 is using with commit dae320ec3173 ("ARM: dts: DRA7: change address-cells and size-cells"). Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-09-14ARM: dts: am57xx-beagle-x15: Add support for rev B1Nishanth Menon4-585/+628
Latest update to the BeagleBoard-X15 platform (revision B1)[1] updates for allowing UHS SD cards to function with the split of supply to SD card from a dedicated LDO. As a result of this, AM57xx BeagleBoard-X15 now uses gpio2_30 instead of gpio6_28 for HDMI because HDMI_LS_OE should now be switched from GPIO6_28(Y9) to GPIO2_30 (AG8) to avoid a 1.8V GPIO toggling a 3.3V SoC input when the SD card is in UHS 1.8V mode. NOTE: For UHS mode to function, we need full fledged IODelay support in kernel to be functional. IODelay support is yet to be added. Further, It does not make much sense to spin off a new board compatible flag since there is no real functional benefit for the same. Note: Even though production version is supposed to be B1, there is over ~200 boards of previous version (A2)[2] out there which continue to get supported with the existing dts file (to maintain compatibility with existing bootloaders for A2) and the production board is now supported as revb1. [1] https://github.com/beagleboard/beagleboard-x15/blob/master/BEAGLEBOARD_X15_REV_B1.pdf [2] http://marc.info/?l=linux-arm-kernel&m=147273929820708&w=2 Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-09-14ARM: dts: am57xx-beagle-x15: Remove pinmux configurations for erratum i869Nishanth Menon1-221/+1
Pinmuxing for DRA7x/AM57x family of processors need to be done in IO isolation as part of initial bootloader executed from SRAM. This is done as part of iodelay configuration sequence and is required due to the limitations introduced by erratum ID: i869[1] (IO Glitches can occur when changing IO settings) and elaborated in the Technical Reference Manual[2] 18.4.6.1.7 Isolation Requirements. Only peripheral that is permitted for dynamic pin mux configuration is MMC and DCAN. MMC is permitted to change to accommodate the requirements for varied speeds (which require IO-delay support in kernel as well). DCAN is a result of i893[1] (DCAN initialization sequence). However, since we don't use DCAN on X15, with the exception of MMC, all other pin mux configurations are removed from the dts. [1] http://www.ti.com/lit/pdf/sprz429 [2] http://www.ti.com/lit/pdf/sprui30 Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-09-14ARM: dts: Fix LEDs for igepv5Tony Lindgren3-10/+29
The LEDs on igepv5 are on the GPIO expander unlike on omap5-uevm. Configuration copied from git.isee.biz git tree except fixed for red and blue mapping. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-09-14ARM: dts: Add power button support for igepv5Tony Lindgren1-0/+19
Add power button support for igepv5. Cc: Agustí Fontquerni i Gorchs <afontquerni@iseebcn.com> Cc: Enric Balletbo Serra <eballetbo@gmail.com> Cc: Javier Martinez Canillas <javier@osg.samsung.com> Cc: Pau Pajuel <ppajuel@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-09-14ARM: dts: Configure omap5 OTG ID pinTony Lindgren2-1/+10
The ID pin GPIO comes from the PMIC. Let's configure it as a GPIO for the driver to use, and also make sure the PMIC GPIO pin muxing is correct. The PMIC pad1 and 2 values for omap5-uevm and igepv5 are 0x5a and 0x1b, we only need to clear bit 2 in pad1 register to make the ID pin GPIO work. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-09-14ARM: dts: ARM: dts: Fix omap5 SDIO dat1 interruptTony Lindgren2-4/+10
Few changes to fix issues I've noticed while debugging omap5-uevm wl18xx issues: 1. Move wlcore irq pin muxing under wlcore. This irq could be different from gpio_wk14 on some board variants 2. Don't configure pull on wlcore irq pin. There is a 10k pull up resistor R105 on the device to VDDS_1v8_MAIN 3. The padconf register for wlsdio_data1 is wrong, it's really at 0x1a8 + 2 - 0x40 = 0x16a offset, not at 0x168 as that's for wlsdio_data0 4. Mark the omap5-uevm wlan as compatible with ti,wl1837 as that's what the TDK R078 part seems to be 5. The MMC interrupt for WLAN musb be wakeupgen, not gic Looks like omap5-uevm WLAN behaves better now, but I still seem to have issues with some access points. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-09-14ARM: dts: Configure panda SDIO WLAN wakeirqTony Lindgren1-0/+2
Otherwise we have delays on noticing interrupts from the WLAN card when idle. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-09-13Merge tag 'clcd-nomadik' of ↵Arnd Bergmann5-0/+145
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt Pull "CLCD graphics on the Nomadik NHK15" from Linus Walleij: * tag 'clcd-nomadik' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: add the CLCD LCD display to the NHK15 ARM: dts: add PMU to the NHK15 device tree ARM: nomadik: select MFD_SYSCON dt-bindings: Add TPO TPG110 binding dt-bindings: add vendor TPO ARM: dts: add STMPE PWM to the NHK15 device tree
2016-09-13Merge tag 'imx-dt-4.9' of ↵Arnd Bergmann62-506/+3365
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt Pull "i.MX device tree changes for 4.9" from Shawn Guo: - Add SoC support for i.MX7 Solo which is a reduced version of i.MX7 Dual. - New board support: Gateworks Ventana i.MX6Q/DL GW553x, Inverse Path i.MX53 USB armory, i.MX6Q/DL TS-4900 from Technologic Systems, i.MX6UL GEA M6UL modules from Engicam, i.MX7 Solo Warp7 board. - Add DMA and IPU CSI devices for i.MX53 SoC support. - Refine i.MX7 Dual SoC DTS as a preparation of i.MX7 Solo support. - Use of_graph dt nodes to describe the panel for vf610-colibri and ls1021a-twr boards. - Add gpio-ranges property to i.MX6 GPIO controllers, which will be useful when GPIO driver is changed to request pad configuration as GPIO function. - Random device additions or small changes for various board support. * tag 'imx-dt-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (41 commits) ARM: dts: add gpio-ranges property to iMX GPIO controllers ARM: dts: imx35: add iim module to imx35.dtsi ARM: dts: vf610-colibri: use of_graph dt nodes to describe the panel ARM: dts: ls1021a: Add of_graph dt nodes to describe the panel ARM: dts: imx53: add support for USB armory board devicetree: Add vendor prefix for Inverse Path ARM: dts: imx7s-warp: Add Bluetooth support ARM: dts: imx7s-warp: Add User Button support ARM: dts: imx7s-warp: Enable I2C2 device support ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support ARM: dts: imx6ul iomuxc syscon is compatible to imx6q ARM: dts: imx7-colibri: add Audio support ARM: dts: imx7-colibri: add basic supply regulators ARM: dts: imx7-colibri: move SD-card to module level ARM: dts: imx6sx: Add GPU bindings ARM: dts: imx7s-warp: Let the codec control MCLK pinctrl ARM: dts: imx6ul-pico-hobbit: Use WDOG_B pin reset ARM: dts: imx6q-bx50v3: configure unused pca953x pins ARM: dts: imx6sx: document SION necessity of ENET1_REF_CLK1 ARM: dts: imx7s-warp: Use WDOG_B pin reset ...
2016-09-13Merge tag 'realview-dts-split' of ↵Arnd Bergmann9-18/+175
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/dt Pull "RealView DTS file fixup and split" from Linus Walleij: Fix the ethernet issue on revision D of the RealView EB Split the DTS files in per-revision variants * tag 'realview-dts-split' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM: dts: add RealView EB rev D A9 MPCore variant ARM: dts: split RealView EB 11MPCore variants ARM: dts: add device tree for the RealView EB Rev D ARM: dts: fix RealView EB SMSC ethernet version
2016-09-13Merge tag 'tegra-for-4.9-arm-dt' of ↵Arnd Bergmann4-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Pull "ARM: tegra: Device tree changes for v4.9-rc1" from Thierry Reding: Contains a couple of cleanups for Tegra114 device trees. * tag 'tegra-for-4.9-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Correct polarity for Tegra114 PMIC interrupt ARM: tegra: Fix Tegra114 USB compatible values
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-04 03:58:44 +0300