summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-10-25net: Prevent infinite while loop in skb_tx_hash()Michael Chan1-0/+6
Drivers call netdev_set_num_tc() and then netdev_set_tc_queue() to set the queue count and offset for each TC. So the queue count and offset for the TCs may be zero for a short period after dev->num_tc has been set. If a TX packet is being transmitted at this time in the code path netdev_pick_tx() -> skb_tx_hash(), skb_tx_hash() may see nonzero dev->num_tc but zero qcount for the TC. The while loop that keeps looping while hash >= qcount will not end. Fix it by checking the TC's qcount to be nonzero before using it. Fixes: eadec877ce9c ("net: Add support for subordinate traffic classes to netdev_pick_tx") Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25RDMA/sa_query: Use strscpy_pad instead of memcpy to copy a stringMark Zhang1-2/+3
When copying the device name, the length of the data memcpy copied exceeds the length of the source buffer, which cause the KASAN issue below. Use strscpy_pad() instead. BUG: KASAN: slab-out-of-bounds in ib_nl_set_path_rec_attrs+0x136/0x320 [ib_core] Read of size 64 at addr ffff88811a10f5e0 by task rping/140263 CPU: 3 PID: 140263 Comm: rping Not tainted 5.15.0-rc1+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack_lvl+0x57/0x7d print_address_description.constprop.0+0x1d/0xa0 kasan_report+0xcb/0x110 kasan_check_range+0x13d/0x180 memcpy+0x20/0x60 ib_nl_set_path_rec_attrs+0x136/0x320 [ib_core] ib_nl_make_request+0x1c6/0x380 [ib_core] send_mad+0x20a/0x220 [ib_core] ib_sa_path_rec_get+0x3e3/0x800 [ib_core] cma_query_ib_route+0x29b/0x390 [rdma_cm] rdma_resolve_route+0x308/0x3e0 [rdma_cm] ucma_resolve_route+0xe1/0x150 [rdma_ucm] ucma_write+0x17b/0x1f0 [rdma_ucm] vfs_write+0x142/0x4d0 ksys_write+0x133/0x160 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f26499aa90f Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 29 fd ff ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 5c fd ff ff 48 RSP: 002b:00007f26495f2dc0 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00000000000007d0 RCX: 00007f26499aa90f RDX: 0000000000000010 RSI: 00007f26495f2e00 RDI: 0000000000000003 RBP: 00005632a8315440 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000293 R12: 00007f26495f2e00 R13: 00005632a83154e0 R14: 00005632a8315440 R15: 00005632a830a810 Allocated by task 131419: kasan_save_stack+0x1b/0x40 __kasan_kmalloc+0x7c/0x90 proc_self_get_link+0x8b/0x100 pick_link+0x4f1/0x5c0 step_into+0x2eb/0x3d0 walk_component+0xc8/0x2c0 link_path_walk+0x3b8/0x580 path_openat+0x101/0x230 do_filp_open+0x12e/0x240 do_sys_openat2+0x115/0x280 __x64_sys_openat+0xce/0x140 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 2ca546b92a02 ("IB/sa: Route SA pathrecord query through netlink") Link: https://lore.kernel.org/r/72ede0f6dab61f7f23df9ac7a70666e07ef314b0.1635055496.git.leonro@nvidia.com Signed-off-by: Mark Zhang <markzhang@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-10-25net: nxp: lpc_eth.c: avoid hang when bringing interface downTrevor Woerner1-3/+2
A hard hang is observed whenever the ethernet interface is brought down. If the PHY is stopped before the LPC core block is reset, the SoC will hang. Comparing lpc_eth_close() and lpc_eth_open() I re-arranged the ordering of the functions calls in lpc_eth_close() to reset the hardware before stopping the PHY. Fixes: b7370112f519 ("lpc32xx: Added ethernet driver") Signed-off-by: Trevor Woerner <twoerner@gmail.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25blk-cgroup: synchronize blkg creation against policy deactivationYu Kuai1-0/+10
Our test reports a null pointer dereference: [ 168.534653] ================================================================== [ 168.535614] Disabling lock debugging due to kernel taint [ 168.536346] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 168.537274] #PF: supervisor read access in kernel mode [ 168.537964] #PF: error_code(0x0000) - not-present page [ 168.538667] PGD 0 P4D 0 [ 168.539025] Oops: 0000 [#1] PREEMPT SMP KASAN [ 168.539656] CPU: 13 PID: 759 Comm: bash Tainted: G B 5.15.0-rc2-next-202100 [ 168.540954] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_0738364 [ 168.542736] RIP: 0010:bfq_pd_init+0x88/0x1e0 [ 168.543318] Code: 98 00 00 00 e8 c9 e4 5b ff 4c 8b 65 00 49 8d 7c 24 08 e8 bb e4 5b ff 4d0 [ 168.545803] RSP: 0018:ffff88817095f9c0 EFLAGS: 00010002 [ 168.546497] RAX: 0000000000000001 RBX: ffff888101a1c000 RCX: 0000000000000000 [ 168.547438] RDX: 0000000000000003 RSI: 0000000000000002 RDI: ffff888106553428 [ 168.548402] RBP: ffff888106553400 R08: ffffffff961bcaf4 R09: 0000000000000001 [ 168.549365] R10: ffffffffa2e16c27 R11: fffffbfff45c2d84 R12: 0000000000000000 [ 168.550291] R13: ffff888101a1c098 R14: ffff88810c7a08c8 R15: ffffffffa55541a0 [ 168.551221] FS: 00007fac75227700(0000) GS:ffff88839ba80000(0000) knlGS:0000000000000000 [ 168.552278] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 168.553040] CR2: 0000000000000008 CR3: 0000000165ce7000 CR4: 00000000000006e0 [ 168.554000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 168.554929] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 168.555888] Call Trace: [ 168.556221] <TASK> [ 168.556510] blkg_create+0x1c0/0x8c0 [ 168.556989] blkg_conf_prep+0x574/0x650 [ 168.557502] ? stack_trace_save+0x99/0xd0 [ 168.558033] ? blkcg_conf_open_bdev+0x1b0/0x1b0 [ 168.558629] tg_set_conf.constprop.0+0xb9/0x280 [ 168.559231] ? kasan_set_track+0x29/0x40 [ 168.559758] ? kasan_set_free_info+0x30/0x60 [ 168.560344] ? tg_set_limit+0xae0/0xae0 [ 168.560853] ? do_sys_openat2+0x33b/0x640 [ 168.561383] ? do_sys_open+0xa2/0x100 [ 168.561877] ? __x64_sys_open+0x4e/0x60 [ 168.562383] ? __kasan_check_write+0x20/0x30 [ 168.562951] ? copyin+0x48/0x70 [ 168.563390] ? _copy_from_iter+0x234/0x9e0 [ 168.563948] tg_set_conf_u64+0x17/0x20 [ 168.564467] cgroup_file_write+0x1ad/0x380 [ 168.565014] ? cgroup_file_poll+0x80/0x80 [ 168.565568] ? __mutex_lock_slowpath+0x30/0x30 [ 168.566165] ? pgd_free+0x100/0x160 [ 168.566649] kernfs_fop_write_iter+0x21d/0x340 [ 168.567246] ? cgroup_file_poll+0x80/0x80 [ 168.567796] new_sync_write+0x29f/0x3c0 [ 168.568314] ? new_sync_read+0x410/0x410 [ 168.568840] ? __handle_mm_fault+0x1c97/0x2d80 [ 168.569425] ? copy_page_range+0x2b10/0x2b10 [ 168.570007] ? _raw_read_lock_bh+0xa0/0xa0 [ 168.570622] vfs_write+0x46e/0x630 [ 168.571091] ksys_write+0xcd/0x1e0 [ 168.571563] ? __x64_sys_read+0x60/0x60 [ 168.572081] ? __kasan_check_write+0x20/0x30 [ 168.572659] ? do_user_addr_fault+0x446/0xff0 [ 168.573264] __x64_sys_write+0x46/0x60 [ 168.573774] do_syscall_64+0x35/0x80 [ 168.574264] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 168.574960] RIP: 0033:0x7fac74915130 [ 168.575456] Code: 73 01 c3 48 8b 0d 58 ed 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 444 [ 168.577969] RSP: 002b:00007ffc3080e288 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 168.578986] RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007fac74915130 [ 168.579937] RDX: 0000000000000009 RSI: 000056007669f080 RDI: 0000000000000001 [ 168.580884] RBP: 000056007669f080 R08: 000000000000000a R09: 00007fac75227700 [ 168.581841] R10: 000056007655c8f0 R11: 0000000000000246 R12: 0000000000000009 [ 168.582796] R13: 0000000000000001 R14: 00007fac74be55e0 R15: 00007fac74be08c0 [ 168.583757] </TASK> [ 168.584063] Modules linked in: [ 168.584494] CR2: 0000000000000008 [ 168.584964] ---[ end trace 2475611ad0f77a1a ]--- This is because blkg_alloc() is called from blkg_conf_prep() without holding 'q->queue_lock', and elevator is exited before blkg_create(): thread 1 thread 2 blkg_conf_prep spin_lock_irq(&q->queue_lock); blkg_lookup_check -> return NULL spin_unlock_irq(&q->queue_lock); blkg_alloc blkcg_policy_enabled -> true pd = ->pd_alloc_fn blkg->pd[i] = pd blk_mq_exit_sched bfq_exit_queue blkcg_deactivate_policy spin_lock_irq(&q->queue_lock); __clear_bit(pol->plid, q->blkcg_pols); spin_unlock_irq(&q->queue_lock); q->elevator = NULL; spin_lock_irq(&q->queue_lock); blkg_create if (blkg->pd[i]) ->pd_init_fn -> q->elevator is NULL spin_unlock_irq(&q->queue_lock); Because blkcg_deactivate_policy() requires queue to be frozen, we can grab q_usage_counter to synchoronize blkg_conf_prep() against blkcg_deactivate_policy(). Fixes: e21b7a0b9887 ("block, bfq: add full hierarchical scheduling and cgroups support") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20211020014036.2141723-1-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-25block: refactor bio_iov_bvec_set()Pavel Begunkov1-23/+14
Combine bio_iov_bvec_set() and bio_iov_bvec_set_append() and let the caller to do iov_iter_advance(). Also get rid of __bio_iov_bvec_set(), which was duplicated in the final binary, and replace a weird iov_iter_truncate() of a temporal iter copy with min() better reflecting the intention. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/bcf1ac36fce769a514e19475f3623cd86a1d8b72.1635006010.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-25block: add single bio async direct IO helperPavel Begunkov1-3/+84
As with __blkdev_direct_IO_simple(), we can implement direct IO more efficiently if there is only one bio. Add __blkdev_direct_IO_async() and blkdev_bio_end_io_async(). This patch brings me from 4.45-4.5 MIOPS with nullblk to 4.7+. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/f0ae4109b7a6934adede490f84d188d53b97051b.1635006010.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-25block: ataflop: more blk-mq refactoring fixesMichael Schmitz1-6/+39
As it turns out, my earlier patch in commit 86d46fdaa12a (block: ataflop: fix breakage introduced at blk-mq refactoring) was incomplete. This patch fixes any remaining issues found during more testing and code review. Requests exceeding 4 k are handled in 4k segments but __blk_mq_end_request() is never called on these (still sectors outstanding on the request). With redo_fd_request() removed, there is no provision to kick off processing of the next segment, causing requests exceeding 4k to hang. (By setting /sys/block/fd0/queue/max_sectors_k <= 4 as workaround, this behaviour can be avoided). Instead of reintroducing redo_fd_request(), requeue the remainder of the request by calling blk_mq_requeue_request() on incomplete requests (i.e. when blk_update_request() still returns true), and rely on the block layer to queue the residual as new request. Both error handling and formatting needs to release the ST-DMA lock, so call finish_fdc() on these (this was previously handled by redo_fd_request()). finish_fdc() may be called legitimately without the ST-DMA lock held - make sure we only release the lock if we actually held it. In a similar way, early exit due to errors in ataflop_queue_rq() must release the lock. After minor errors, fd_error sets up to recalibrate the drive but never re-runs the current operation (another task handled by redo_fd_request() before). Call do_fd_action() to get the next steps (seek, retry read/write) underway. Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Fixes: 6ec3938cff95f (ataflop: convert to blk-mq) CC: linux-block@vger.kernel.org Link: https://lore.kernel.org/r/20211024002013.9332-1-schmitzmic@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-25io_uring: clusterise ki_flags access in rw_prepPavel Begunkov1-10/+11
ioprio setup doesn't depend on other fields that are modified in io_prep_rw() and we can move it down in the function without worrying about performance. It's useful as it makes iocb->ki_flags accesses/modifications closer together, so it's more likely the compiler will cache it in a register and avoid extra reloads. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/8ee98779c06f1b59f6039b1e292db4332efd664b.1634987320.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-25io_uring: kill unused param from io_file_supports_nowaitPavel Begunkov1-4/+3
io_file_supports_nowait() doesn't use rw argument anymore, remove it. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/4bd6709fc573d70c866ea656cb7a7dbe94be8026.1634987320.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-25io_uring: clean up timeout async_data allocationPavel Begunkov1-1/+3
opcode prep functions are one of the first things that are called, we can't have ->async_data allocated at this point and it's certainly a bug. Reflect this assumption in io_timeout_prep() and add a WARN_ONCE just in case. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/75a28ca7dbcc5af8b6cd9092819e8384c24dedd4.1634987320.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-25io_uring: don't try io-wq polling if not supportedPavel Begunkov1-2/+6
If an opcode doesn't support polling, just let it be executed synchronously in iowq, otherwise it will do a nonblock attempt just to fail in io_arm_poll_handler() and return back to blocking execution. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/6401256db01b88f448f15fcd241439cb76f5b940.1634987320.git.asml.silence@gmail.com Reviewed-by: Hao Xu <haoxu@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-25io_uring: check if opcode needs poll first on armingPavel Begunkov1-4/+2
->pollout or ->pollin are set only for opcodes that need a file, so if io_arm_poll_handler() tests them first we can be sure that the request has file set and the ->file check can be removed. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/9adfe4f543d984875e516fce6da35348aab48668.1634987320.git.asml.silence@gmail.com Reviewed-by: Hao Xu <haoxu@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-25io_uring: clean iowq submit work cancellationPavel Begunkov1-30/+29
If we've got IO_WQ_WORK_CANCEL in io_wq_submit_work(), handle the error on the same lines as the check instead of having a weird code flow. The main loop doesn't change but goes one indention left. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/ff4a09cf41f7a22bbb294b6f1faea721e21fe615.1634987320.git.asml.silence@gmail.com Reviewed-by: Hao Xu <haoxu@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-25io_uring: clean io_wq_submit_work()'s main loopPavel Begunkov1-28/+12
Do a bit of cleaning for the main loop of io_wq_submit_work(). Get rid of switch, just replace it with a single if as we're retrying in both other cases. Kill issue_sqe label, Get rid of needs_poll nesting and disambiguate a bit the comment. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/ed12ce0c64e051f9a6b8a37a24f8ea554d299c29.1634987320.git.asml.silence@gmail.com Reviewed-by: Hao Xu <haoxu@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-25cfg80211: correct bridge/4addr mode checkJanusz Dziedzic1-7/+7
Without the patch we fail: $ sudo brctl addbr br0 $ sudo brctl addif br0 wlp1s0 $ sudo iw wlp1s0 set 4addr on command failed: Device or resource busy (-16) Last command failed but iface was already in 4addr mode. Fixes: ad4bb6f8883a ("cfg80211: disallow bridging managed/adhoc interfaces") Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com> Link: https://lore.kernel.org/r/20211024201546.614379-1-janusz.dziedzic@gmail.com [add fixes tag, fix indentation, edit commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-25cfg80211: fix management registrations lockingJohannes Berg4-15/+17
The management registrations locking was broken, the list was locked for each wdev, but cfg80211_mgmt_registrations_update() iterated it without holding all the correct spinlocks, causing list corruption. Rather than trying to fix it with fine-grained locking, just move the lock to the wiphy/rdev (still need the list on each wdev), we already need to hold the wdev lock to change it, so there's no contention on the lock in any case. This trivially fixes the bug since we hold one wdev's lock already, and now will hold the lock that protects all lists. Cc: stable@vger.kernel.org Reported-by: Jouni Malinen <j@w1.fi> Fixes: 6cd536fe62ef ("cfg80211: change internal management frame registration API") Link: https://lore.kernel.org/r/20211025133111.5cf733eab0f4.I7b0abb0494ab712f74e2efcd24bb31ac33f7eee9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-25KVM: x86/xen: Fix kvm_xen_has_interrupt() sleeping in kvm_vcpu_block()David Woodhouse1-5/+22
In kvm_vcpu_block, the current task is set to TASK_INTERRUPTIBLE before making a final check whether the vCPU should be woken from HLT by any incoming interrupt. This is a problem for the get_user() in __kvm_xen_has_interrupt(), which really shouldn't be sleeping when the task state has already been set. I think it's actually harmless as it would just manifest itself as a spurious wakeup, but it's causing a debug warning: [ 230.963649] do not call blocking ops when !TASK_RUNNING; state=1 set at [<00000000b6bcdbc9>] prepare_to_swait_exclusive+0x30/0x80 Fix the warning by turning it into an *explicit* spurious wakeup. When invoked with !task_is_running(current) (and we might as well add in_atomic() there while we're at it), just return 1 to indicate that an IRQ is pending, which will cause a wakeup and then something will call it again in a context that *can* sleep so it can fault the page back in. Cc: stable@vger.kernel.org Fixes: 40da8ccd724f ("KVM: x86/xen: Add event channel interrupt vector upcall") Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <168bf8c689561da904e48e2ff5ae4713eaef9e2d.camel@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-25Merge tag 'kvm-s390-master-5.15-2' of ↵Paolo Bonzini2-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fixes for interrupt delivery Two bugs that might result in CPUs not woken up when interrupts are pending.
2021-10-25Merge branch 'ksettings-locking-fixes'David S. Miller1-59/+81
Andrew Lunn says: ==================== ksettings_{get|set} lock fixes Walter Stoll <Walter.Stoll@duagon.com> reported a race condition between "ethtool -s eth0 speed 100 duplex full autoneg off" and phylib reading the current status from the PHY. Both ksetting_get and ksetting_set fail the take the phydev mutex, and as a result, there is a small window of time where the phydev members are not self consistent. Patch 1 fixes phy_ethtool_ksettings_get by adding the needed lock. Patches 2 and 3 move code around and perform to refactoring, to allow patch 4 to fix phy_ethtool_ksettings_set by added the lock. Thanks go to Walter for the detailed origional report, suggested fix, and testing of the proposed patches. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25phy: phy_ethtool_ksettings_set: Lock the PHY while changing settingsAndrew Lunn1-1/+3
There is a race condition where the PHY state machine can change members of the phydev structure at the same time userspace requests a change via ethtool. To prevent this, have phy_ethtool_ksettings_set take the PHY lock. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Reported-by: Walter Stoll <Walter.Stoll@duagon.com> Suggested-by: Walter Stoll <Walter.Stoll@duagon.com> Tested-by: Walter Stoll <Walter.Stoll@duagon.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25phy: phy_start_aneg: Add an unlocked versionAndrew Lunn1-6/+24
Split phy_start_aneg into a wrapper which takes the PHY lock, and a helper doing the real work. This will be needed when phy_ethtook_ksettings_set takes the lock. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25phy: phy_ethtool_ksettings_set: Move after phy_start_anegAndrew Lunn1-53/+53
This allows it to make use of a helper which assume the PHY is already locked. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25phy: phy_ethtool_ksettings_get: Lock the phy for consistencyAndrew Lunn1-0/+2
The PHY structure should be locked while copying information out if it, otherwise there is no guarantee of self consistency. Without the lock the PHY state machine could be updating the structure. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25KVM: x86: switch pvclock_gtod_sync_lock to a raw spinlockDavid Woodhouse2-15/+15
On the preemption path when updating a Xen guest's runstate times, this lock is taken inside the scheduler rq->lock, which is a raw spinlock. This was shown in a lockdep warning: [ 89.138354] ============================= [ 89.138356] [ BUG: Invalid wait context ] [ 89.138358] 5.15.0-rc5+ #834 Tainted: G S I E [ 89.138360] ----------------------------- [ 89.138361] xen_shinfo_test/2575 is trying to lock: [ 89.138363] ffffa34a0364efd8 (&kvm->arch.pvclock_gtod_sync_lock){....}-{3:3}, at: get_kvmclock_ns+0x1f/0x130 [kvm] [ 89.138442] other info that might help us debug this: [ 89.138444] context-{5:5} [ 89.138445] 4 locks held by xen_shinfo_test/2575: [ 89.138447] #0: ffff972bdc3b8108 (&vcpu->mutex){+.+.}-{4:4}, at: kvm_vcpu_ioctl+0x77/0x6f0 [kvm] [ 89.138483] #1: ffffa34a03662e90 (&kvm->srcu){....}-{0:0}, at: kvm_arch_vcpu_ioctl_run+0xdc/0x8b0 [kvm] [ 89.138526] #2: ffff97331fdbac98 (&rq->__lock){-.-.}-{2:2}, at: __schedule+0xff/0xbd0 [ 89.138534] #3: ffffa34a03662e90 (&kvm->srcu){....}-{0:0}, at: kvm_arch_vcpu_put+0x26/0x170 [kvm] ... [ 89.138695] get_kvmclock_ns+0x1f/0x130 [kvm] [ 89.138734] kvm_xen_update_runstate+0x14/0x90 [kvm] [ 89.138783] kvm_xen_update_runstate_guest+0x15/0xd0 [kvm] [ 89.138830] kvm_arch_vcpu_put+0xe6/0x170 [kvm] [ 89.138870] kvm_sched_out+0x2f/0x40 [kvm] [ 89.138900] __schedule+0x5de/0xbd0 Cc: stable@vger.kernel.org Reported-by: syzbot+b282b65c2c68492df769@syzkaller.appspotmail.com Fixes: 30b5c851af79 ("KVM: x86/xen: Add support for vCPU runstate information") Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <1b02a06421c17993df337493a68ba923f3bd5c0f.camel@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-25ARM: 9148/1: handle CONFIG_CPU_ENDIAN_BE32 in arch/arm/kernel/head.SLABBE Corentin1-2/+2
My intel-ixp42x-welltech-epbx100 no longer boot since 4.14. This is due to commit 463dbba4d189 ("ARM: 9104/2: Fix Keystone 2 kernel mapping regression") which forgot to handle CONFIG_CPU_ENDIAN_BE32 as possible BE config. Suggested-by: Krzysztof Hałasa <khalasa@piap.pl> Fixes: 463dbba4d189 ("ARM: 9104/2: Fix Keystone 2 kernel mapping regression") Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2021-10-25gpio: mlxbf2.c: Add check for bgpio_init failureAsmaa Mnebhi1-0/+5
Add a check if bgpio_init fails. Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2021-10-25gpio: xgs-iproc: fix parsing of ngpios propertyJonas Gorski1-1/+1
of_property_read_u32 returns 0 on success, not true, so we need to invert the check to actually take over the provided ngpio value. Fixes: 6a41b6c5fc20 ("gpio: Add xgs-iproc driver") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2021-10-25powerpc/pseries/iommu: Create huge DMA window if no MMIO32 is presentAlexey Kardashevskiy1-6/+6
The iommu_init_table() helper takes an address range to reserve in the IOMMU table being initialized to exclude MMIO addresses, this is useful if the window stretches far beyond 4GB (although wastes some TCEs). At the moment the code searches for such MMIO32 range and fails if none found which is considered a problem while it really is not: it is actually better as this says there is no MMIO32 to reserve and we can use usually wasted TCEs. Furthermore PHYP never actually allows creating windows starting at busaddress=0 so this MMIO32 range is never useful. This removes error exit and initializes the table with zero range if no MMIO32 is detected. Fixes: 381ceda88c4c ("powerpc/pseries/iommu: Make use of DDW for indirect mapping") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211020132315.2287178-5-aik@ozlabs.ru
2021-10-25powerpc/pseries/iommu: Check if the default window in use before removing itAlexey Kardashevskiy1-6/+6
At the moment this check is performed after we remove the default window which is late and disallows to revert whatever changes enable_ddw() has made to DMA windows. This moves the check and error exit before removing the window. This raised the message severity from "debug" to "warning" as this should not happen in practice and cannot be triggered by the userspace. Fixes: 381ceda88c4c ("powerpc/pseries/iommu: Make use of DDW for indirect mapping") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211020132315.2287178-4-aik@ozlabs.ru
2021-10-25powerpc/pseries/iommu: Use correct vfree for it_mapAlexey Kardashevskiy1-1/+2
The it_map array is vzalloc'ed so use vfree() for it when creating a huge DMA window failed for whatever reason. While at this, write zero to it_map. Fixes: 381ceda88c4c ("powerpc/pseries/iommu: Make use of DDW for indirect mapping") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211020132315.2287178-3-aik@ozlabs.ru
2021-10-25ata: sata_mv: Fix the error handling of mv_chip_id()Zheyu Ma1-2/+2
mv_init_host() propagates the value returned by mv_chip_id() which in turn gets propagated by mv_pci_init_one() and hits local_pci_probe(). During the process of driver probing, the probe function should return < 0 for failure, otherwise, the kernel will treat value > 0 as success. Since this is a bug rather than a recoverable runtime error we should use dev_alert() instead of dev_err(). Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2021-10-24Revert "mm/secretmem: use refcount_t instead of atomic_t"Linus Torvalds1-5/+4
This reverts commit 110860541f443f950c1274f217a1a3e298670a33. Converting the "secretmem_users" counter to a refcount is incorrect, because a refcount is special in zero and can't just be incremented (but a count of users is not, and "no users" is actually perfectly valid and not a sign of a free'd resource). Reported-by: syzbot+75639e6a0331cd61d3e2@syzkaller.appspotmail.com Cc: Jordy Zomer <jordy@pwning.systems> Cc: Kees Cook <keescook@chromium.org>, Cc: Jordy Zomer <jordy@jordyzomer.github.io> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-10-24Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-1/+1
Pull autofs fix from Al Viro: "Fix for a braino of mine (in getting rid of open-coded dentry_path_raw() in autofs a couple of cycles ago). Mea culpa... Obvious -stable fodder" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: autofs: fix wait name hash calculation in autofs_wait()
2021-10-24Merge tag 'sched_urgent_for_v5.15_rc7' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Borislav Petkov: "Reset clang's Shadow Call Stack on hotplug to prevent it from overflowing" * tag 'sched_urgent_for_v5.15_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/scs: Reset the shadow stack when idle_task_exit
2021-10-24Merge tag 'x86_urgent_for_v5.15_rc7' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Borislav Petkov: "A single change adding Dave Hansen to our maintainers team" * tag 'x86_urgent_for_v5.15_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS: Add Dave Hansen to the x86 maintainer team
2021-10-24Merge tag '5.15-rc6-ksmbd-fixes' of git://git.samba.org/ksmbdLinus Torvalds14-153/+306
Pull ksmbd fixes from Steve French: "Ten fixes for the ksmbd kernel server, for improved security and additional buffer overflow checks: - a security improvement to session establishment to reduce the possibility of dictionary attacks - fix to ensure that maximum i/o size negotiated in the protocol is not less than 64K and not more than 8MB to better match expected behavior - fix for crediting (flow control) important to properly verify that sufficient credits are available for the requested operation - seven additional buffer overflow, buffer validation checks" * tag '5.15-rc6-ksmbd-fixes' of git://git.samba.org/ksmbd: ksmbd: add buffer validation in session setup ksmbd: throttle session setup failures to avoid dictionary attacks ksmbd: validate OutputBufferLength of QUERY_DIR, QUERY_INFO, IOCTL requests ksmbd: validate credit charge after validating SMB2 PDU body size ksmbd: add buffer validation for smb direct ksmbd: limit read/write/trans buffer size not to exceed 8MB ksmbd: validate compound response buffer ksmbd: fix potencial 32bit overflow from data area check in smb2_write ksmbd: improve credits management ksmbd: add validation in smb2_ioctl
2021-10-24Merge tag 'scsi-fixes' of ↵Linus Torvalds11-41/+69
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Ten fixes, seven of which are in drivers. The core fixes are one to fix a potential crash on resume, one to sort out our reference count releases to avoid releasing in-use modules and one to adjust the cmd per lun calculation to avoid an overflow in hyper-v" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: ufs-pci: Force a full restore after suspend-to-disk scsi: qla2xxx: Fix unmap of already freed sgl scsi: qla2xxx: Fix a memory leak in an error path of qla2x00_process_els() scsi: qla2xxx: Return -ENOMEM if kzalloc() fails scsi: sd: Fix crashes in sd_resume_runtime() scsi: mpi3mr: Fix duplicate device entries when scanning through sysfs scsi: core: Put LLD module refcnt after SCSI device is released scsi: storvsc: Fix validation for unsolicited incoming packets scsi: iscsi: Fix set_param() handling scsi: core: Fix shost->cmd_per_lun calculation in scsi_add_host_with_dma()
2021-10-24net: ethernet: microchip: lan743x: Fix dma allocation failure by using ↵Yuiko Oshino1-0/+20
dma_set_mask_and_coherent The dma failure was reported in the raspberry pi github (issue #4117). https://github.com/raspberrypi/linux/issues/4117 The use of dma_set_mask_and_coherent fixes the issue. Tested on 32/64-bit raspberry pi CM4 and 64-bit ubuntu x86 PC with EVB-LAN7430. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: ethernet: microchip: lan743x: Fix driver crash when lan743x_pm_resume failsYuiko Oshino1-0/+2
The driver needs to clean up and return when the initialization fails on resume. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-23io-wq: use helper for worker refcountingPavel Begunkov1-2/+1
Use io_worker_release() instead of hand coding it in io_worker_exit(). Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/6f95f09d2cdbafcbb2e22ad0d1a2bc4d3962bf65.1634987320.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-23Merge tag 'block-5.15-2021-10-22' of git://git.kernel.dk/linux-blockLinus Torvalds2-2/+4
Pull block fixes from Jens Axboe: "Fix for the cgroup code not ussing irq safe stats updates, and one fix for an error handling condition in add_partition()" * tag 'block-5.15-2021-10-22' of git://git.kernel.dk/linux-block: block: fix incorrect references to disk objects blk-cgroup: blk_cgroup_bio_start() should use irq-safe operations on blkg->iostat_cpu
2021-10-23Merge tag 'io_uring-5.15-2021-10-22' of git://git.kernel.dk/linux-blockLinus Torvalds2-14/+47
Pull io_uring fixes from Jens Axboe: "Two fixes for the max workers limit API that was introduced this series: one fix for an issue with that code, and one fixing a linked timeout regression in this series" * tag 'io_uring-5.15-2021-10-22' of git://git.kernel.dk/linux-block: io_uring: apply worker limits to previous users io_uring: fix ltimeout unprep io_uring: apply max_workers limit to all future users io-wq: max_worker fixes
2021-10-23sched: make task_struct->plug always definedJens Axboe1-2/+0
If CONFIG_BLOCK isn't set, then it's an empty struct anyway. Just make it generally available, so we don't break the compile: kernel/sched/core.c: In function ‘sched_submit_work’: kernel/sched/core.c:6346:35: error: ‘struct task_struct’ has no member named ‘plug’ 6346 | blk_flush_plug(tsk->plug, true); | ^~ kernel/sched/core.c: In function ‘io_schedule_prepare’: kernel/sched/core.c:8357:20: error: ‘struct task_struct’ has no member named ‘plug’ 8357 | if (current->plug) | ^~ kernel/sched/core.c:8358:39: error: ‘struct task_struct’ has no member named ‘plug’ 8358 | blk_flush_plug(current->plug, true); | ^~ Reported-by: Nathan Chancellor <nathan@kernel.org> Fixes: 008f75a20e70 ("block: cleanup the flush plug helpers") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-23io_uring: implement async hybrid mode for pollable requestsHao Xu1-1/+35
The current logic of requests with IOSQE_ASYNC is first queueing it to io-worker, then execute it in a synchronous way. For unbound works like pollable requests(e.g. read/write a socketfd), the io-worker may stuck there waiting for events for a long time. And thus other works wait in the list for a long time too. Let's introduce a new way for unbound works (currently pollable requests), with this a request will first be queued to io-worker, then executed in a nonblock try rather than a synchronous way. Failure of that leads it to arm poll stuff and then the worker can begin to handle other works. The detail process of this kind of requests is: step1: original context: queue it to io-worker step2: io-worker context: nonblock try(the old logic is a synchronous try here) | |--fail--> arm poll | |--(fail/ready)-->synchronous issue | |--(succeed)-->worker finish it's job, tw take over the req This works much better than the old IOSQE_ASYNC logic in cases where unbound max_worker is relatively small. In this case, number of io-worker eazily increments to max_worker, new worker cannot be created and running workers stuck there handling old works in IOSQE_ASYNC mode. In my 64-core machine, set unbound max_worker to 20, run echo-server, turns out: (arguments: register_file, connetion number is 1000, message size is 12 Byte) original IOSQE_ASYNC: 76664.151 tps after this patch: 166934.985 tps Suggested-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Hao Xu <haoxu@linux.alibaba.com> Link: https://lore.kernel.org/r/20211018133445.103438-1-haoxu@linux.alibaba.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-23cgroup: Fix memory leak caused by missing cgroup_bpf_offlineQuanyang Wang1-1/+3
When enabling CONFIG_CGROUP_BPF, kmemleak can be observed by running the command as below: $mount -t cgroup -o none,name=foo cgroup cgroup/ $umount cgroup/ unreferenced object 0xc3585c40 (size 64): comm "mount", pid 425, jiffies 4294959825 (age 31.990s) hex dump (first 32 bytes): 01 00 00 80 84 8c 28 c0 00 00 00 00 00 00 00 00 ......(......... 00 00 00 00 00 00 00 00 6c 43 a0 c3 00 00 00 00 ........lC...... backtrace: [<e95a2f9e>] cgroup_bpf_inherit+0x44/0x24c [<1f03679c>] cgroup_setup_root+0x174/0x37c [<ed4b0ac5>] cgroup1_get_tree+0x2c0/0x4a0 [<f85b12fd>] vfs_get_tree+0x24/0x108 [<f55aec5c>] path_mount+0x384/0x988 [<e2d5e9cd>] do_mount+0x64/0x9c [<208c9cfe>] sys_mount+0xfc/0x1f4 [<06dd06e0>] ret_fast_syscall+0x0/0x48 [<a8308cb3>] 0xbeb4daa8 This is because that since the commit 2b0d3d3e4fcf ("percpu_ref: reduce memory footprint of percpu_ref in fast path") root_cgrp->bpf.refcnt.data is allocated by the function percpu_ref_init in cgroup_bpf_inherit which is called by cgroup_setup_root when mounting, but not freed along with root_cgrp when umounting. Adding cgroup_bpf_offline which calls percpu_ref_kill to cgroup_kill_sb can free root_cgrp->bpf.refcnt.data in umount path. This patch also fixes the commit 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself"). A cgroup_bpf_offline is needed to do a cleanup that frees the resources which are allocated by cgroup_bpf_inherit in cgroup_setup_root. And inside cgroup_bpf_offline, cgroup_get() is at the beginning and cgroup_put is at the end of cgroup_bpf_release which is called by cgroup_bpf_offline. So cgroup_bpf_offline can keep the balance of cgroup's refcount. Fixes: 2b0d3d3e4fcf ("percpu_ref: reduce memory footprint of percpu_ref in fast path") Fixes: 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself") Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20211018075623.26884-1-quanyang.wang@windriver.com
2021-10-23bpf: Fix error usage of map_fd and fdget() in generic_map_update_batch()Xu Kuohai1-2/+3
1. The ufd in generic_map_update_batch() should be read from batch.map_fd; 2. A call to fdget() should be followed by a symmetric call to fdput(). Fixes: aa2e93b8e58e ("bpf: Add generic support for update and delete batch ops") Signed-off-by: Xu Kuohai <xukuohai@huawei.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211019032934.1210517-1-xukuohai@huawei.com
2021-10-23Merge branch 'Fix up bpf_jit_limit some more'Alexei Starovoitov5-2/+15
Lorenz Bauer says: ==================== Fix some inconsistencies of bpf_jit_limit on non-x86 platforms. I've dropped exposing bpf_jit_current since we couldn't agree on file modes, correct names, etc. ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-10-23bpf: Prevent increasing bpf_jit_limit above maxLorenz Bauer3-2/+5
Restrict bpf_jit_limit to the maximum supported by the arch's JIT. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211014142554.53120-4-lmb@cloudflare.com
2021-10-23bpf: Define bpf_jit_alloc_exec_limit for arm64 JITLorenz Bauer1-0/+5
Expose the maximum amount of useable memory from the arm64 JIT. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211014142554.53120-3-lmb@cloudflare.com
2021-10-23bpf: Define bpf_jit_alloc_exec_limit for riscv JITLorenz Bauer1-0/+5
Expose the maximum amount of useable memory from the riscv JIT. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Luke Nelson <luke.r.nels@gmail.com> Acked-by: Björn Töpel <bjorn@kernel.org> Link: https://lore.kernel.org/bpf/20211014142554.53120-2-lmb@cloudflare.com
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 07:04:20 +0300