summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-01-29net: free altname using an RCU callbackJakub Kicinski2-11/+17
We had to add another synchronize_rcu() in recent fix. Bite the bullet and add an rcu_head to netdev_name_node, free from RCU. Note that name_node does not hold any reference on dev to which it points, but there must be a synchronize_rcu() on device removal path, so we should be fine. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29dt-bindings: nfc: ti,trf7970a: fix usage exampleTobias Schramm1-1/+1
The TRF7970A is a SPI device, not I2C. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29ptp: add FemtoClock3 Wireless as ptp hardware clockMin Li5-0/+1347
The RENESAS FemtoClock3 Wireless is a high-performance jitter attenuator, frequency translator, and clock synthesizer. The device is comprised of 3 digital PLLs (DPLL) to track CLKIN inputs and three independent low phase noise fractional output dividers (FOD) that output low phase noise clocks. FemtoClock3 supports one Time Synchronization (Time Sync) channel to enable an external processor to control the phase and frequency of the Time Sync channel and to take phase measurements using the TDC. Intended applications are synchronization using the precision time protocol (PTP) and synchronization with 0.5 Hz and 1 Hz signals from GNSS. Signed-off-by: Min Li <min.li.xe@renesas.com> Acked-by: Lee Jones <lee@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29ptp: introduce PTP_CLOCK_EXTOFF event for the measured external offsetMin Li3-4/+28
This change is for the PHC devices that can measure the phase offset between PHC signal and the external signal, such as the 1PPS signal of GNSS. Reporting PTP_CLOCK_EXTOFF to user space will be piggy-backed to the existing ptp_extts_event so that application such as ts2phc can poll the external offset the same way as extts. Hence, ts2phc can use the offset to achieve the alignment between PHC and the external signal by the help of either SW or HW filters. Signed-off-by: Min Li <min.li.xe@renesas.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29Merge branch 'net-module-description'David S. Miller16-0/+16
Breno Leitao says: ==================== Fix MODULE_DESCRIPTION() for net (p3) There are hundreds of network modules that misses MODULE_DESCRIPTION(), causing a warning when compiling with W=1. Example: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/com90io.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/arc-rimi.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/com20020.o This part3 of the patchset focus on the missing ethernet drivers, which is now warning free. This also fixes net/pcs and ieee802154. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29net: fill in MODULE_DESCRIPTION()s for arcnetBreno Leitao1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to arcnet module. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29net: fill in MODULE_DESCRIPTION()s for ieee802154Breno Leitao2-0/+2
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to ieee802154 modules. Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29net: fill in MODULE_DESCRIPTION()s for PCS driversBreno Leitao3-0/+3
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Lynx, XPCS and LynxI PCS drivers. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29net: fill in MODULE_DESCRIPTION()s for ec_bhfBreno Leitao1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Beckhoff CX5020 EtherCAT Ethernet driver. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29net: fill in MODULE_DESCRIPTION()s for cpsw-commonBreno Leitao1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the TI CPSW switch module. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29net: fill in MODULE_DESCRIPTION()s for dwmac-socfpgaBreno Leitao1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the STMicro DWMAC for Altera SOCs. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29net: fill in MODULE_DESCRIPTION()s for Qualcom driversBreno Leitao2-0/+2
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Qualcom rmnet and emac drivers. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29net: fill in MODULE_DESCRIPTION()s for SMSC driversBreno Leitao3-0/+3
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the SMSC 91x/911x/9420 Ethernet drivers. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29net: fill in MODULE_DESCRIPTION()s for ocelotBreno Leitao1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Ocelot SoCs (VSC7514) helpers driver. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29net: fill in MODULE_DESCRIPTION()s for encx24j600Breno Leitao1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Microchip ENCX24J600 helpers driver. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29taprio: validate TCA_TAPRIO_ATTR_FLAGS through policy instead of open-codingAlessandro Marcolini1-46/+26
As of now, the field TCA_TAPRIO_ATTR_FLAGS is being validated by manually checking its value, using the function taprio_flags_valid(). With this patch, the field will be validated through the netlink policy NLA_POLICY_MASK, where the mask is defined by TAPRIO_SUPPORTED_FLAGS. The mutual exclusivity of the two flags TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD and TCA_TAPRIO_ATTR_FLAG_TXTIME_ASSIST is still checked manually. Changes since RFC: - fixed reversed xmas tree - use NL_SET_ERR_MSG_MOD() for both invalid configuration Changes since v1: - Changed NL_SET_ERR_MSG_MOD to NL_SET_ERR_MSG_ATTR when wrong flags issued - Changed __u32 to u32 Changes since v2: - Added the missing parameter for NL_SET_ERR_MSG_ATTR (sorry again for the noise) Signed-off-by: Alessandro Marcolini <alessandromarcolini99@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29tcp: add sanity checks to rx zerocopyEric Dumazet1-1/+11
TCP rx zerocopy intent is to map pages initially allocated from NIC drivers, not pages owned by a fs. This patch adds to can_map_frag() these additional checks: - Page must not be a compound one. - page->mapping must be NULL. This fixes the panic reported by ZhangPeng. syzbot was able to loopback packets built with sendfile(), mapping pages owned by an ext4 file to TCP rx zerocopy. r3 = socket$inet_tcp(0x2, 0x1, 0x0) mmap(&(0x7f0000ff9000/0x4000)=nil, 0x4000, 0x0, 0x12, r3, 0x0) r4 = socket$inet_tcp(0x2, 0x1, 0x0) bind$inet(r4, &(0x7f0000000000)={0x2, 0x4e24, @multicast1}, 0x10) connect$inet(r4, &(0x7f00000006c0)={0x2, 0x4e24, @empty}, 0x10) r5 = openat$dir(0xffffffffffffff9c, &(0x7f00000000c0)='./file0\x00', 0x181e42, 0x0) fallocate(r5, 0x0, 0x0, 0x85b8) sendfile(r4, r5, 0x0, 0x8ba0) getsockopt$inet_tcp_TCP_ZEROCOPY_RECEIVE(r4, 0x6, 0x23, &(0x7f00000001c0)={&(0x7f0000ffb000/0x3000)=nil, 0x3000, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, &(0x7f0000000440)=0x40) r6 = openat$dir(0xffffffffffffff9c, &(0x7f00000000c0)='./file0\x00', 0x181e42, 0x0) Fixes: 93ab6cc69162 ("tcp: implement mmap() for zero copy receive") Link: https://lore.kernel.org/netdev/5106a58e-04da-372a-b836-9d3d0bd2507b@huawei.com/T/ Reported-and-bisected-by: ZhangPeng <zhangpeng362@huawei.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Arjun Roy <arjunroy@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: linux-mm@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-fsdevel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29nfc: nci: free rx_data_reassembly skb on NCI device cleanupFedor Pchelkin1-0/+4
rx_data_reassembly skb is stored during NCI data exchange for processing fragmented packets. It is dropped only when the last fragment is processed or when an NTF packet with NCI_OP_RF_DEACTIVATE_NTF opcode is received. However, the NCI device may be deallocated before that which leads to skb leak. As by design the rx_data_reassembly skb is bound to the NCI device and nothing prevents the device to be freed before the skb is processed in some way and cleaned, free it on the NCI device cleanup. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation") Cc: stable@vger.kernel.org Reported-by: syzbot+6b7c68d9c21e4ee4251b@syzkaller.appspotmail.com Closes: https://lore.kernel.org/lkml/000000000000f43987060043da7b@google.com/ Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29net: hsr: remove WARN_ONCE() in send_hsr_supervision_frame()Nikita Zhandarovich1-2/+2
Syzkaller reported [1] hitting a warning after failing to allocate resources for skb in hsr_init_skb(). Since a WARN_ONCE() call will not help much in this case, it might be prudent to switch to netdev_warn_once(). At the very least it will suppress syzkaller reports such as [1]. Just in case, use netdev_warn_once() in send_prp_supervision_frame() for similar reasons. [1] HSR: Could not send supervision frame WARNING: CPU: 1 PID: 85 at net/hsr/hsr_device.c:294 send_hsr_supervision_frame+0x60a/0x810 net/hsr/hsr_device.c:294 RIP: 0010:send_hsr_supervision_frame+0x60a/0x810 net/hsr/hsr_device.c:294 ... Call Trace: <IRQ> hsr_announce+0x114/0x370 net/hsr/hsr_device.c:382 call_timer_fn+0x193/0x590 kernel/time/timer.c:1700 expire_timers kernel/time/timer.c:1751 [inline] __run_timers+0x764/0xb20 kernel/time/timer.c:2022 run_timer_softirq+0x58/0xd0 kernel/time/timer.c:2035 __do_softirq+0x21a/0x8de kernel/softirq.c:553 invoke_softirq kernel/softirq.c:427 [inline] __irq_exit_rcu kernel/softirq.c:632 [inline] irq_exit_rcu+0xb7/0x120 kernel/softirq.c:644 sysvec_apic_timer_interrupt+0x95/0xb0 arch/x86/kernel/apic/apic.c:1076 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:649 ... This issue is also found in older kernels (at least up to 5.10). Cc: stable@vger.kernel.org Reported-by: syzbot+3ae0a3f42c84074b7c8e@syzkaller.appspotmail.com Fixes: 121c33b07b31 ("net: hsr: introduce common code for skb initialization") Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29octeontx2-af: Add filter profiles in hardware to extract packet headersSuman Ghosh4-69/+571
This patch adds hardware profile supports for extracting packet headers. It makes sure that hardware is capabale of extracting ICMP, CPT, ERSPAN headers. Signed-off-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29Linux 6.8-rc2v6.8-rc2Linus Torvalds1-1/+1
2024-01-29Merge tag 'cxl-fixes-6.8-rc2' of ↵Linus Torvalds5-13/+23
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull cxl fixes from Dan Williams: "A build regression fix, a device compatibility fix, and an original bug preventing creation of large (16 device) interleave sets: - Fix unit test build regression fallout from global "missing-prototypes" change - Fix compatibility with devices that do not support interrupts - Fix overflow when calculating the capacity of large interleave sets" * tag 'cxl-fixes-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: cxl/region：Fix overflow issue in alloc_hpa() cxl/pci: Skip irq features if MSI/MSI-X are not supported tools/testing/nvdimm: Disable "missing prototypes / declarations" warnings tools/testing/cxl: Disable "missing prototypes / declarations" warnings
2024-01-28tracefs: remove stale 'update_gid' codeLinus Torvalds2-39/+0
The 'eventfs_update_gid()' function is no longer called, so remove it (and the helper function it uses). Link: https://lore.kernel.org/all/CAHk-=wj+DsZZ=2iTUkJ-Nojs9fjYMvPs1NuoM3yK7aTDtJfPYQ@mail.gmail.com/ Fixes: 8186fff7ab64 ("tracefs/eventfs: Use root and instance inodes as default ownership") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-01-28Merge tag 'mips-fixes_6.8_1' of ↵Linus Torvalds34-230/+83
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - fix boot issue on single core Lantiq Danube devices - fix boot issue on Loongson64 platforms - fix improper FPU setup - fix missing prototypes issues * tag 'mips-fixes_6.8_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: mips: Call lose_fpu(0) before initializing fcr31 in mips_set_personality_nan MIPS: loongson64: set nid for reserved memblock region Revert "MIPS: loongson64: set nid for reserved memblock region" MIPS: lantiq: register smp_ops on non-smp platforms MIPS: loongson64: set nid for reserved memblock region MIPS: reserve exception vector space ONLY ONCE MIPS: BCM63XX: Fix missing prototypes MIPS: sgi-ip32: Fix missing prototypes MIPS: sgi-ip30: Fix missing prototypes MIPS: fw arc: Fix missing prototypes MIPS: sgi-ip27: Fix missing prototypes MIPS: Alchemy: Fix missing prototypes MIPS: Cobalt: Fix missing prototypes
2024-01-28Merge tag 'locking_urgent_for_v6.8_rc2' of ↵Linus Torvalds2-6/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fix from Borislav Petkov: - Prevent an inconsistent futex operation leading to stale state exposure * tag 'locking_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Prevent the reuse of stale pi_state
2024-01-28Merge tag 'irq_urgent_for_v6.8_rc2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Borislav Petkov: - Initialize the resend node of each IRQ descriptor, not only the first one * tag 'irq_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Initialize resend_node hlist for all interrupt descriptors
2024-01-28Merge tag 'timers_urgent_for_v6.8_rc2' of ↵Linus Torvalds2-1/+29
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Borislav Petkov: - Preserve the number of idle calls and sleep entries across CPU hotplug events in order to be able to compute correct averages - Limit the duration of the clocksource watchdog checking interval as too long intervals lead to wrongly marking the TSC as unstable * tag 'timers_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick/sched: Preserve number of idle sleeps across CPU hotplug events clocksource: Skip watchdog check for large watchdog intervals
2024-01-28Merge tag 'x86_urgent_for_v6.8_rc2' of ↵Linus Torvalds6-12/+50
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Make sure 32-bit syscall registers are properly sign-extended - Add detection for AMD's Zen5 generation CPUs and Intel's Clearwater Forest CPU model number - Make a stub function export non-GPL because it is part of the paravirt alternatives and that can be used by non-GPL code * tag 'x86_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/CPU/AMD: Add more models to X86_FEATURE_ZEN5 x86/entry/ia32: Ensure s32 is sign extended to s64 x86/cpu: Add model number for Intel Clearwater Forest processor x86/CPU/AMD: Add X86_FEATURE_ZEN5 x86/paravirt: Make BUG_func() usable by non-GPL modules
2024-01-28Merge tag 'fixes-2024-01-28' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull memblock fix from Mike Rapoport: "Fix crash when reserved memory is not added to memory. When CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, the initialization of reserved pages may cause access of NODE_DATA() with invalid nid and crash. Add a fall back to early_pfn_to_nid() in memmap_init_reserved_pages() to ensure a valid node id is always passed to init_reserved_page()" * tag 'fixes-2024-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: memblock: fix crash when reserved memory is not added to memory
2024-01-28parisc: Drop unneeded semicolon in parse_tree_node()Helge Deller1-1/+1
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Helge Deller <deller@gmx.de> Closes: https://lore.kernel.org/oe-kbuild-all/202401222059.Wli6OGT0-lkp@intel.com/
2024-01-28parisc: Prevent hung tasks when printing inventory on serial consoleHelge Deller1-0/+3
Printing the inventory on a serial console can be quite slow and thus may trigger the hung task detector (CONFIG_DETECT_HUNG_TASK=y) and possibly reboot the machine. Adding a cond_resched() prevents this. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v6.0+
2024-01-28parisc: Check for valid stride size for cache flushesHelge Deller1-0/+4
Report if the calculated cache stride size is zero, otherwise the cache flushing routine will never finish and hang the machine. This can be reproduced with a testcase in qemu, where the firmware reports wrong cache values. Signed-off-by: Helge Deller <deller@gmx.de>
2024-01-28parisc: Make RO_DATA page aligned in vmlinux.lds.SHelge Deller1-1/+1
The rodata_test program for CONFIG_DEBUG_RODATA_TEST=y complains if read-only data does not start at page boundary. Signed-off-by: Helge Deller <deller@gmx.de>
2024-01-27Merge tag 'platform-drivers-x86-v6.8-2' of ↵Linus Torvalds14-177/+460
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: - WMI bus driver fixes - Second attempt (previously reverted) at P2SB PCI rescan deadlock fix - AMD PMF driver improvements - MAINTAINERS updates - Misc other small fixes and hw-id additions * tag 'platform-drivers-x86-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: touchscreen_dmi: Add info for the TECLAST X16 Plus tablet platform/x86/intel/ifs: Call release_firmware() when handling errors. platform/x86/amd/pmf: Fix memory leak in amd_pmf_get_pb_data() platform/x86/amd/pmf: Get ambient light information from AMD SFH driver platform/x86/amd/pmf: Get Human presence information from AMD SFH driver platform/mellanox: mlxbf-pmc: Fix offset calculation for crspace events platform/mellanox: mlxbf-tmfifo: Drop Tx network packet when Tx TmFIFO is full MAINTAINERS: remove defunct acpi4asus project info from asus notebooks section MAINTAINERS: add Luke Jones as maintainer for asus notebooks MAINTAINERS: Remove Perry Yuan as DELL WMI HARDWARE PRIVACY SUPPORT maintainer platform/x86: silicom-platform: Add missing "Description:" for power_cycle sysfs attr platform/x86: intel-wmi-sbl-fw-update: Fix function name in error message platform/x86: p2sb: Use pci_resource_n() in p2sb_read_bar0() platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe platform/x86: intel-uncore-freq: Fix types in sysfs callbacks platform/x86: wmi: Fix wmi_dev_probe() platform/x86: wmi: Fix notify callback locking platform/x86: wmi: Decouple legacy WMI notify handlers from wmi_block_list platform/x86: wmi: Return immediately if an suitable WMI event is found platform/x86: wmi: Fix error handling in legacy WMI notify handler functions
2024-01-27Merge tag 'loongarch-fixes-6.8-1' of ↵Linus Torvalds4-11/+14
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Fix boot failure on machines with more than 8 nodes, and fix two build errors about KVM" * tag 'loongarch-fixes-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: KVM: Add returns to SIMD stubs LoongArch: KVM: Fix build due to API changes LoongArch/smp: Call rcutree_report_cpu_starting() at tlb_init()
2024-01-27Merge tag 'xfs-6.8-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds1-10/+17
Pull xfs fix from Chandan Babu: - Fix read only mounts when using fsopen mount API * tag 'xfs-6.8-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: read only mounts with fsopen mount API are busted
2024-01-27Merge tag 'bcachefs-2024-01-26' of https://evilpiepirate.org/git/bcachefsLinus Torvalds10-32/+42
Pull bcachefs fixes from Kent Overstreet: - fix for REQ_OP_FLUSH usage; this fixes filesystems going read only with -EOPNOTSUPP from the block layer. (this really should have gone in with the block layer patch causing the -EOPNOTSUPP, or should have gone in before). - fix an allocation in non-sleepable context - fix one source of srcu lock latency, on devices with terrible discard latency - fix a reattach_inode() issue in fsck * tag 'bcachefs-2024-01-26' of https://evilpiepirate.org/git/bcachefs: bcachefs: __lookup_dirent() works in snapshot, not subvol bcachefs: discard path uses unlock_long() bcachefs: fix incorrect usage of REQ_OP_FLUSH bcachefs: Add gfp flags param to bch2_prt_task_backtrace()
2024-01-27Merge tag '6.8-rc2-smb3-server-fixes' of git://git.samba.org/ksmbdLinus Torvalds3-3/+6
Pull smb server fixes from Steve French: - Fix netlink OOB - Minor kernel doc fix * tag '6.8-rc2-smb3-server-fixes' of git://git.samba.org/ksmbd: ksmbd: fix global oob in ksmbd_nl_policy smb: Fix some kernel-doc comments
2024-01-27Merge tag '6.8-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds13-74/+467
Pull smb client fixes from Steve French: "Nine cifs/smb client fixes - Four network error fixes (three relating to replays of requests that need to be retried, and one fixing some places where we were returning the wrong rc up the stack on network errors) - Two multichannel fixes including locking fix and case where subset of channels need reconnect - netfs integration fixup: share remote i_size with netfslib - Two small cleanups (one for addressing a clang warning)" * tag '6.8-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix stray unlock in cifs_chan_skip_or_disable cifs: set replay flag for retries of write command cifs: commands that are retried should have replay flag set cifs: helper function to check replayable error codes cifs: translate network errors on send to -ECONNABORTED cifs: cifs_pick_channel should try selecting active channels cifs: Share server EOF pos with netfslib smb: Work around Clang __bdos() type confusion smb: client: delete "true", "false" defines
2024-01-27modpost: Add '.ltext' and '.ltext.*' to TEXT_SECTIONSNathan Chancellor1-1/+2
After the linked LLVM change, building ARCH=um defconfig results in a segmentation fault in modpost. Prior to commit a23e7584ecf3 ("modpost: unify 'sym' and 'to' in default_mismatch_handler()"), there was a warning: WARNING: modpost: vmlinux.o(__ex_table+0x88): Section mismatch in reference to the .ltext:(unknown) WARNING: modpost: The relocation at __ex_table+0x88 references section ".ltext" which is not in the list of authorized sections. If you're adding a new section and/or if this reference is valid, add ".ltext" to the list of authorized sections to jump to on fault. This can be achieved by adding ".ltext" to OTHER_TEXT_SECTIONS in scripts/mod/modpost.c. The linked LLVM change moves global objects to the '.ltext' (and '.ltext.*' with '-ffunction-sections') sections with '-mcmodel=large', which ARCH=um uses. These sections should be handled just as '.text' and '.text.*' are, so add them to TEXT_SECTIONS. Cc: stable@vger.kernel.org Closes: https://github.com/ClangBuiltLinux/linux/issues/1981 Link: https://github.com/llvm/llvm-project/commit/4bf8a688956a759b7b6b8d94f42d25c13c7af130 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-01-27um: Fix adding '-no-pie' for clangNathan Chancellor1-1/+3
The kernel builds with -fno-PIE, so commit 883354afbc10 ("um: link vmlinux with -no-pie") added the compiler linker flag '-no-pie' via cc-option because '-no-pie' was only supported in GCC 6.1.0 and newer. While this works for GCC, this does not work for clang because cc-option uses '-c', which stops the pipeline right before linking, so '-no-pie' is unconsumed and clang warns, causing cc-option to fail just as it would if the option was entirely unsupported: $ clang -Werror -no-pie -c -o /dev/null -x c /dev/null clang-16: error: argument unused during compilation: '-no-pie' [-Werror,-Wunused-command-line-argument] A recent version of clang exposes this because it generates a relocation under '-mcmodel=large' that is not supported in PIE mode: /usr/sbin/ld: init/main.o: relocation R_X86_64_32 against symbol `saved_command_line' can not be used when making a PIE object; recompile with -fPIE /usr/sbin/ld: failed to set dynamic section sizes: bad value clang: error: linker command failed with exit code 1 (use -v to see invocation) Remove the cc-option check altogether. It is wasteful to invoke the compiler to check for '-no-pie' because only one supported compiler version does not support it, GCC 5.x (as it is supported with the minimum version of clang and GCC 6.1.0+). Use a combination of the gcc-min-version macro and CONFIG_CC_IS_CLANG to unconditionally add '-no-pie' with CONFIG_LD_SCRIPT_DYN=y, so that it is enabled with all compilers that support this. Furthermore, using gcc-min-version can help turn this back into LINK-$(CONFIG_LD_SCRIPT_DYN) += -no-pie when the minimum version of GCC is bumped past 6.1.0. Cc: stable@vger.kernel.org Closes: https://github.com/ClangBuiltLinux/linux/issues/1982 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-01-27kbuild: defconf: use SRCARCH to find merged configsZhang Bingwu1-4/+4
For some ARCH values, SRCARCH, which should be used for finding arch/ subdirectory, is different from ARCH. Signed-off-by: Zhang Bingwu <xtexchooser@duck.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-01-27Merge branch 'txgbe-irq_domain'David S. Miller10-181/+337
Jiawen Wu says: ==================== Implement irq_domain for TXGBE Implement irq_domain for the MAC interrupt and handle the sub-irqs. v3 -> v4: - fix build error v2 -> v3: - use macro defines instead of magic number v1 -> v2: - move interrupt codes to txgbe_irq.c - add txgbe-link-irq to msic irq domain - remove functions that are not needed ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-27net: txgbe: use irq_domain for interrupt controllerJiawen Wu9-54/+193
In the current interrupt controller, the MAC interrupt acts as the parent interrupt in the GPIO IRQ chip. But when the number of Rx/Tx ring changes, the PCI IRQ vector needs to be reallocated. Then this interrupt controller would be corrupted. So use irq_domain structure to avoid the above problem. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-27net: txgbe: move interrupt codes to a separate fileJiawen Wu4-127/+144
In order to change the interrupt response structure, there will be a lot of code added next. Move these interrupt codes to a new file, to make the codes cleaner. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-27Documentation: mlx5.rst: Add note for eswitch MDWilliam Tu1-0/+4
Add a note when using esw_port_metadata. The parameter has runtime mode but setting it does not take effect immediately. Setting it must happen in legacy mode, and the port metadata takes effects when the switchdev mode is enabled. Disable eswitch port metadata:: $ devlink dev param set pci/0000:06:00.0 name esw_port_metadata value \ false cmode runtime Change eswitch mode to switchdev mode where after choosing the metadata value:: $ devlink dev eswitch set pci/0000:06:00.0 mode switchdev Note that other mlx5 devlink runtime parameters, esw_multiport and flow_steering_mode, do not have this limitation. Signed-off-by: William Tu <witu@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-27rust: phy: use VTABLE_DEFAULT_ERRORFUJITA Tomonori1-8/+8
Since 6.8-rc1, using VTABLE_DEFAULT_ERROR for optional functions (never called) in #[vtable] is the recommended way. Note that no functional changes in this patch. Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-27rust: phy: use `srctree`-relative linksFUJITA Tomonori1-4/+4
The relative paths like the following are bothersome and don't work with `O=` builds: //! C headers: [`include/linux/phy.h`](../../../../../../../include/linux/phy.h). This updates such links by using the `srctree`-relative link feature introduced in 6.8-rc1 like: //! C headers: [`include/linux/phy.h`](srctree/include/linux/phy.h). Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-27mips: Call lose_fpu(0) before initializing fcr31 in mips_set_personality_nanXi Ruoyao1-0/+6
If we still own the FPU after initializing fcr31, when we are preempted the dirty value in the FPU will be read out and stored into fcr31, clobbering our setting. This can cause an improper floating-point environment after execve(). For example: zsh% cat measure.c #include <fenv.h> int main() { return fetestexcept(FE_INEXACT); } zsh% cc measure.c -o measure -lm zsh% echo $((1.0/3)) # raising FE_INEXACT 0.33333333333333331 zsh% while ./measure; do ; done (stopped in seconds) Call lose_fpu(0) before setting fcr31 to prevent this. Closes: https://lore.kernel.org/linux-mips/7a6aa1bbdbbe2e63ae96ff163fab0349f58f1b9e.camel@xry111.site/ Fixes: 9b26616c8d9d ("MIPS: Respect the ISA level in FCSR handling") Cc: stable@vger.kernel.org Signed-off-by: Xi Ruoyao <xry111@xry111.site> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2024-01-27MIPS: loongson64: set nid for reserved memblock regionHuang Pei2-0/+5
Commit 61167ad5fecd("mm: pass nid to reserve_bootmem_region()") reveals that reserved memblock regions have no valid node id set, just set it right since loongson64 firmware makes it clear in memory layout info. This works around booting failure on 3A1000+ since commit 61167ad5fecd ("mm: pass nid to reserve_bootmem_region()") under CONFIG_DEFERRED_STRUCT_PAGE_INIT. Signed-off-by: Huang Pei <huangpei@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 22:18:40 +0300