| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add memory range handled by ATF to not be touched by linux kernel.
ATF is SoC specific and not board-specific so add it to mt7988.dtsi.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241217091238.16032-2-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add board specific pinctrl configurations on Bananapi R4.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241217085435.9586-6-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add mt7988a pinctrl node.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241217085435.9586-5-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The pp3300_panel fixed regulator is just a load switch. It does not have
any regulating capabilities. Thus having voltage constraints on it is
wrong.
Remove the voltage constraints.
Fixes: cabc71b08eb5 ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20241030070224.1006331-2-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Due to the mediatek,mac-wol property previously being handled backwards
by the dwmac-mediatek driver, its use in the DTs seems to have been
inconsistent.
Now that the driver has been fixed, correct this description. All the
currently upstream boards support MAC WOL, so add the mediatek,mac-wol
property to the missing ones.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20241109-mediatek-mac-wol-noninverted-v2-2-0e264e213878@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The MAC reset for PCIe port 1 on MT8195 when asserted during suspend
causes the system to hang during resume with the following error (with
no_console_suspend enabled):
mtk-pcie-gen3 112f8000.pcie: PCIe link down, current LTSSM state: detect.quiet (0x0)
mtk-pcie-gen3 112f8000.pcie: PM: dpm_run_callback(): genpd_resume_noirq+0x0/0x24 returns -110
mtk-pcie-gen3 112f8000.pcie: PM: failed to resume noirq: error -110
This issue is specific to MT8195. On MT8192 with the PCIe reset,
MT8192_INFRA_RST4_PCIE_TOP_SWRST, added to the DT node, the issue is not
observed.
Since without the reset, the PCIe controller and WiFi card connected to
it, work just as well, remove the reset to allow the system to suspend
and resume properly.
Fixes: ecc0af6a3fe6 ("arm64: dts: mt8195: Add pcie and pcie phy nodes")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20241218-mt8195-pcie1-reset-suspend-fix-v1-1-1c021dda42a6@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Bananapi R3 has a Power socket entended for using external SATA drives.
This Socket is off by default but can be switched with gpio 8.
Add an overlay to activate it.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20241206132401.70259-1-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
On the MT8188, the chip is binned for different GPU voltages at the
highest OPPs. The binning value is stored in the efuse.
Add the NVMEM cell, and tie it to the GPU.
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Link: https://lore.kernel.org/r/20241213-speedbin-v1-1-a0053ead9477@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Some willow devices use second source touchscreen.
Fixes: f006bcf1c972 ("arm64: dts: mt8183: Add kukui-jacuzzi-willow board")
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Link: https://lore.kernel.org/r/20241213-touchscreen-v3-2-7c1f670913f9@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Some kenzo devices use second source touchscreen.
Fixes: 0a9cefe21aec ("arm64: dts: mt8183: Add kukui-jacuzzi-kenzo board")
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Link: https://lore.kernel.org/r/20241213-touchscreen-v3-1-7c1f670913f9@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
change `codec` in pmic (in mt8186-corsola.dtsi) to `audio-codec`
Signed-off-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241212062046.22509-5-xiazhengqiao@huaqin.corp-partner.google.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add extcon node for DP bridge to make the display work properly.
Signed-off-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241212062046.22509-4-xiazhengqiao@huaqin.corp-partner.google.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
MT8186 chinchou, known as ASUS Chromebook CZ12 Flip (CZ1204F)
and CZ12(CZ1204C), is a MT8186 based laptop.
It is based on the "corsola" design.It includes chinchou and chinchou360,
including LTE, stylus, touchscreen combinations.
Signed-off-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
Link: https://lore.kernel.org/r/20241212062046.22509-3-xiazhengqiao@huaqin.corp-partner.google.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add an entry for the MT8186 based Chinchou Chromebook, also known as the
ASUS Chromebook CZ12 Flip (CZ1204F) and CZ12(CZ1204C).
Signed-off-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241212062046.22509-2-xiazhengqiao@huaqin.corp-partner.google.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Describe all the components to get sound output working on the two audio
jacks, Earphone and Speaker, present on the Genio 700 EVK board with the
audio DSP enabled.
Co-developed-by: Aary Patil <aary.patil@mediatek.com>
Signed-off-by: Aary Patil <aary.patil@mediatek.com>
Co-developed-by: Suhrid Subramaniam <suhrid.subramaniam@mediatek.com>
Signed-off-by: Suhrid Subramaniam <suhrid.subramaniam@mediatek.com>
Co-developed-by: parkeryang <Parker.Yang@mediatek.com>
Signed-off-by: parkeryang <Parker.Yang@mediatek.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241210-genio700-audio-output-v2-2-c50886ae0be2@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
MT6359 provides digital audio interfaces. Add a #sound-dai-cells
property for it to allow pointing to it from dai-link nodes.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20241210-genio700-audio-output-v2-1-c50886ae0be2@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The MT6397 PMIC bindings specify exact names for its sub-nodes. The
names used in the current dts don't match, causing a validation error.
Fix up the names. Also drop the label for the regulators node, since
any reference should be against the individual regulator sub-nodes.
Fixes: 16ea61fc5614 ("arm64: dts: mt8173-evb: Add PMIC support")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20241210092614.3951748-2-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The MT6397 PMIC bindings specify exact names for its sub-nodes. The
names used in the current dts don't match, causing a validation error.
Fix up the names. Also drop the label for the regulators node, since
any reference should be against the individual regulator sub-nodes.
Fixes: 689b937bedde ("arm64: dts: mediatek: add mt8173 elm and hana board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20241210092614.3951748-1-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The "regulator-compatible" property has been deprecated since 2012 in
commit 13511def87b9 ("regulator: deprecate regulator-compatible DT
property"), which is so old it's not even mentioned in the converted
regulator bindings YAML file. It should not have been used for new
submissions such as the MT6315.
Drop the "regulator-compatible" property from the board dts. The
property values are the same as the node name, so everything should
continue to work.
Fixes: f2b543a191b6 ("arm64: dts: mediatek: add device-tree for Genio 1200 EVK board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241211052427.4178367-9-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The "regulator-compatible" property has been deprecated since 2012 in
commit 13511def87b9 ("regulator: deprecate regulator-compatible DT
property"), which is so old it's not even mentioned in the converted
regulator bindings YAML file. It should not have been used for new
submissions such as the MT6315.
Drop the "regulator-compatible" property from the board dts. The
property values are the same as the node name, so everything should
continue to work.
Fixes: 96564b1e2ea4 ("arm64: dts: mediatek: Introduce the MT8395 Radxa NIO 12L board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241211052427.4178367-8-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The "regulator-compatible" property has been deprecated since 2012 in
commit 13511def87b9 ("regulator: deprecate regulator-compatible DT
property"), which is so old it's not even mentioned in the converted
regulator bindings YAML file. It is also not listed in the MT6360
regulator and charger bindings.
Drop the "regulator-compatible" property from the board dts. The MT6360
bindings actually require the lowercase name, so with the property
present the regulators were likely not actually working.
Fixes: 6147314aeedc ("arm64: dts: mediatek: Add device-tree for MT8195 Demo board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241211052427.4178367-7-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The "regulator-compatible" property has been deprecated since 2012 in
commit 13511def87b9 ("regulator: deprecate regulator-compatible DT
property"), which is so old it's not even mentioned in the converted
regulator bindings YAML file. It should not have been used for new
submissions such as the MT6315.
Drop the "regulator-compatible" property from the board dts. The
property values are the same as the node name, so everything should
continue to work.
Fixes: 260c04d425eb ("arm64: dts: mediatek: cherry: Enable MT6315 regulators on SPMI bus")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241211052427.4178367-6-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The "regulator-compatible" property has been deprecated since 2012 in
commit 13511def87b9 ("regulator: deprecate regulator-compatible DT
property"), which is so old it's not even mentioned in the converted
regulator bindings YAML file. It should not have been used for new
submissions such as the MT6315.
Drop the "regulator-compatible" property from the board dts. The
property values are the same as the node name, so everything should
continue to work.
Fixes: 3183cb62b033 ("arm64: dts: mediatek: asurada: Add SPMI regulators")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241211052427.4178367-5-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The "regulator-compatible" property has been deprecated since 2012 in
commit 13511def87b9 ("regulator: deprecate regulator-compatible DT
property"), which is so old it's not even mentioned in the converted
regulator bindings YAML file. It is also not listed in the MT6397
regulator bindings. Having them present produces a whole bunch of
validation errors:
Unevaluated properties are not allowed ('regulator-compatible' was unexpected)
Drop the "regulator-compatible" property from the board dts. The
property values are the same as the node name, so everything should
continue to work.
Fixes: 689b937bedde ("arm64: dts: mediatek: add mt8173 elm and hana board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241211052427.4178367-4-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The "regulator-compatible" property has been deprecated since 2012 in
commit 13511def87b9 ("regulator: deprecate regulator-compatible DT
property"), which is so old it's not even mentioned in the converted
regulator bindings YAML file. It is also not listed in the MT6397
regulator bindings. Having them present produces a whole bunch of
validation errors:
Unevaluated properties are not allowed ('regulator-compatible' was unexpected)
Drop the "regulator-compatible" property from the board dts. The
property values are the same as the node name, so everything should
continue to work.
Fixes: 16ea61fc5614 ("arm64: dts: mt8173-evb: Add PMIC support")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241211052427.4178367-3-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Most SoC dtsi files have the display output interfaces disabled by
default, and only enabled on boards that utilize them. The MT8183
has it backwards: the display outputs are left enabled by default,
and only disabled at the board level.
Reverse the situation for the DSI output so that it follows the
normal scheme. For ease of backporting the DPI output is handled
in a separate patch.
Fixes: 88ec840270e6 ("arm64: dts: mt8183: Add dsi node")
Fixes: 19b6403f1e2a ("arm64: dts: mt8183: add mt8183 pumpkin board")
Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20241025075630.3917458-2-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
This reverts commit 377548f05bd0905db52a1d50e5b328b9b4eb049d.
Most SoC dtsi files have the display output interfaces disabled by
default, and only enabled on boards that utilize them. The MT8183
has it backwards: the display outputs are left enabled by default,
and only disabled at the board level.
Reverse the situation for the DPI output so that it follows the
normal scheme. For ease of backporting the DSI output is handled
in a separate patch.
Fixes: 009d855a26fd ("arm64: dts: mt8183: add dpi node to mt8183")
Fixes: 377548f05bd0 ("arm64: dts: mediatek: mt8183-kukui: Disable DPI display interface")
Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20241025075630.3917458-1-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The Android DTB for the related MT8167 reserves 0x30000. This is likely
correct for MT8516 Android devices as well, and there's never any harm
in reserving 64KiB more.
Fixes: 5236347bde42 ("arm64: dts: mediatek: add dtsi for MT8516")
Signed-off-by: Val Packett <val@packett.cool>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241204190524.21862-5-val@packett.cool
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Move the clock-div property from the pumpkin board dtsi to the SoC's
since it belongs to the SoC itself and is required on other devices.
Fixes: 5236347bde42 ("arm64: dts: mediatek: add dtsi for MT8516")
Signed-off-by: Val Packett <val@packett.cool>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241204190524.21862-4-val@packett.cool
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The GICv2 does not support EDGE_FALLING interrupts, so the watchdog
would refuse to attach due to a failing check coming from the GIC driver.
Fixes: 5236347bde42 ("arm64: dts: mediatek: add dtsi for MT8516")
Signed-off-by: Val Packett <val@packett.cool>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241204190524.21862-3-val@packett.cool
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
On the MT8167 which is based on the MT8516 DTS, the following error
was appearing on boot, breaking interrupt operation:
GICv2 detected, but range too small and irqchip.gicv2_force_probe not set
Similar to what's been proposed for MT7622 which has the same issue,
fix by using the range reported by force_probe.
Link: https://lore.kernel.org/all/YmhNSLgp%2Fyg8Vr1F@makrotopia.org/
Fixes: 5236347bde42 ("arm64: dts: mediatek: add dtsi for MT8516")
Signed-off-by: Val Packett <val@packett.cool>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241204190524.21862-2-val@packett.cool
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add support for Starmie Chromebooks.
Signed-off-by: Wojciech Macek <wmacek@chromium.org>
Link: https://lore.kernel.org/r/20241129055720.3328681-3-wmacek@chromium.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add an entry for the MT8186 based Starmie Chromebooks, also known as the
ASUS Chromebook Enterprise CM30 Detachable (CM3001). The device is
a tablet style chromebook.
Signed-off-by: Wojciech Macek <wmacek@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20241129055720.3328681-2-wmacek@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Introduce MT8188-based Chromebook Ciri, also known commercially as
Lenovo Chromebook Duet (11", 9).
Ciri is a detachable device based on the Geralt design, where Geralt is
the codename for the MT8188 platform. Ciri offers 8 SKUs to accommodate
different combinations of second-source components, including:
- audio codecs (RT5682S and ES8326)
- speaker amps (TAS2563 and MAX98390)
- MIPI-DSI panels (BOE nv110wum-l60 and IVO t109nw41)
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241124085739.290556-3-fshao@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add entries for the MT8188-based Chromebook "Ciri", also known as
Lenovo Chromebook Duet (11", 9).
This device features a detachable design with touchscreen, detachable
keyboard and USI 2.0 Stylus support, and has 8 SKUs to accommodate the
combinations of second-source components.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20241124085739.290556-2-fshao@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Sets DMIC one-wire mode on Damu.
Fixes: cabc71b08eb5 ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20241113-damu-v4-1-6911b69610dd@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The current DT has the wakeup-source and mediatek,syscon-wakeup
properties in the XHCI nodes, which configures USB wakeup after powering
down the XHCI hardware block. However, since the XHCI controller is
behind an MTU3 (USB3 DRD controller), the MTU3 only gets powered down
after USB wakeup has been configured, causing the system to detect a
wakeup, and results in broken suspend support as the system resumes
immediately.
Move the wakeup properties to the MTU3 nodes so that USB wakeup is only
enabled after the MTU3 has powered down.
With this change in place, it is possible to suspend and resume, and
also to wakeup through USB, as tested on the Google Steelix (Lenovo 300e
Yoga Chromebook Gen 4).
Fixes: f6c3e61c5486 ("arm64: dts: mediatek: mt8186: Add MTU3 nodes")
Reported-by: Wojciech Macek <wmacek@google.com>
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241106-mt8186-suspend-with-usb-wakeup-v1-1-07734a4c8236@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Bindings expect thermal zones node name to follow certain pattern.
This fixes dtbs_check warning:
mt8183-kukui-jacuzzi-burnet.dtb: thermal-zones: 'tboard1', 'tboard2'
do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,10}-thermal$', 'pinctrl-[0-9]+'
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241209112920.70060-1-krzysztof.kozlowski@linaro.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c component probing support from Wolfram Sang:
"Add OF component probing.
Some devices are designed and manufactured with some components having
multiple drop-in replacement options. These components are often
connected to the mainboard via ribbon cables, having the same signals
and pin assignments across all options. These may include the display
panel and touchscreen on laptops and tablets, and the trackpad on
laptops. Sometimes which component option is used in a particular
device can be detected by some firmware provided identifier, other
times that information is not available, and the kernel has to try to
probe each device.
Instead of a delicate dance between drivers and device tree quirks,
this change introduces a simple I2C component probe function. For a
given class of devices on the same I2C bus, it will go through all of
them, doing a simple I2C read transfer and see which one of them
responds. It will then enable the device that responds"
* tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: fix typo in I2C OF COMPONENT PROBER
of: base: Document prefix argument for of_get_next_child_with_prefix()
i2c: Fix whitespace style issue
arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
platform/chrome: Introduce device tree hardware prober
i2c: of-prober: Add GPIO support to simple helpers
i2c: of-prober: Add simple helpers for regulator support
i2c: Introduce OF component probe function
of: base: Add for_each_child_of_node_with_prefix()
of: dynamic: Add of_changeset_update_prop_string
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bprintf() removal from Steven Rostedt:
- Remove unused bprintf() function, that was added with the rest of the
"bin-printf" functions.
These are functions that are used by trace_printk() that allows to
quickly save the format and arguments into the ring buffer without
the expensive processing of converting numbers to ASCII. Then on
output, at a much later time, the ring buffer is read and the string
processing occurs then. The bprintf() was added for consistency but
was never used. It can be safely removed.
* tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
printf: Remove unused 'bprintf'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Borislav Petkov:
- Fix a case where posix timers with a thread-group-wide target would
miss signals if some of the group's threads are exiting
- Fix a hang caused by ndelay() calling the wrong delay function
__udelay()
- Fix a wrong offset calculation in adjtimex(2) when using ADJ_MICRO
(microsecond resolution) and a negative offset
* tag 'timers_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-timers: Target group sigqueue to current task only if not exiting
delay: Fix ndelay() spuriously treated as udelay()
ntp: Remove invalid cast in time offset math
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Move the ->select callback to the correct ops structure in
irq-mvebu-sei to fix some Marvell Armada platforms
- Add a workaround for Hisilicon ITS erratum 162100801 which can cause
some virtual interrupts to get lost
- More platform_driver::remove() conversion
* tag 'irq_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: Switch back to struct platform_driver::remove()
irqchip/gicv3-its: Add workaround for hip09 ITS erratum 162100801
irqchip/irq-mvebu-sei: Move misplaced select() callback to SEI CP domain
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add a terminating zero end-element to the array describing AMD CPUs
affected by erratum 1386 so that the matching loop actually
terminates instead of going off into the weeds
- Update the boot protocol documentation to mention the fact that the
preferred address to load the kernel to is considered in the
relocatable kernel case too
- Flush the memory buffer containing the microcode patch after applying
microcode on AMD Zen1 and Zen2, to avoid unnecessary slowdowns
- Make sure the PPIN CPU feature flag is cleared on all CPUs if PPIN
has been disabled
* tag 'x86_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Terminate the erratum_1386_microcode array
x86/Documentation: Update algo in init_size description of boot protocol
x86/microcode/AMD: Flush patch buffer mapping after application
x86/mm: Carve out INVLPG inline asm for use by others
x86/cpu: Fix PPIN initialization
|
|
The point behind strscpy() was to once and for all avoid all the
problems with 'strncpy()' and later broken "fixed" versions like
strlcpy() that just made things worse.
So strscpy not only guarantees NUL-termination (unlike strncpy), it also
doesn't do unnecessary padding at the destination. But at the same time
also avoids byte-at-a-time reads and writes by _allowing_ some extra NUL
writes - within the size, of course - so that the whole copy can be done
with word operations.
It is also stable in the face of a mutable source string: it explicitly
does not read the source buffer multiple times (so an implementation
using "strnlen()+memcpy()" would be wrong), and does not read the source
buffer past the size (like the mis-design that is strlcpy does).
Finally, the return value is designed to be simple and unambiguous: if
the string cannot be copied fully, it returns an actual negative error,
making error handling clearer and simpler (and the caller already knows
the size of the buffer). Otherwise it returns the string length of the
result.
However, there was one final stability issue that can be important to
callers: the stability of the destination buffer.
In particular, the same way we shouldn't read the source buffer more
than once, we should avoid doing multiple writes to the destination
buffer: first writing a potentially non-terminated string, and then
terminating it with NUL at the end does not result in a stable result
buffer.
Yes, it gives the right result in the end, but if the rule for the
destination buffer was that it is _always_ NUL-terminated even when
accessed concurrently with updates, the final byte of the buffer needs
to always _stay_ as a NUL byte.
[ Note that "final byte is NUL" here is literally about the final byte
in the destination array, not the terminating NUL at the end of the
string itself. There is no attempt to try to make concurrent reads and
writes give any kind of consistent string length or contents, but we
do want to guarantee that there is always at least that final
terminating NUL character at the end of the destination array if it
existed before ]
This is relevant in the kernel for the tsk->comm[] array, for example.
Even without locking (for either readers or writers), we want to know
that while the buffer contents may be garbled, it is always a valid C
string and always has a NUL character at 'comm[TASK_COMM_LEN-1]' (and
never has any "out of thin air" data).
So avoid any "copy possibly non-terminated string, and terminate later"
behavior, and write the destination buffer only once.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
bprintf() is unused. Remove it. It was added in the commit 4370aa4aa753
("vsprintf: add binary printf") but as far as I can see was never used,
unlike the other two functions in that patch.
Link: https://lore.kernel.org/20241002173147.210107-1-linux@treblig.org
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- assorted minor bug fixes
- assorted platform specific tweaks
- initial RAPL PSYS (SysWatt) support
* tag 'turbostat-2024.11.30' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: 2024.11.30
tools/power turbostat: Add RAPL psys as a built-in counter
tools/power turbostat: Fix child's argument forwarding
tools/power turbostat: Force --no-perf in --dump mode
tools/power turbostat: Add support for /sys/class/drm/card1
tools/power turbostat: Cache graphics sysfs file descriptors during probe
tools/power turbostat: Consolidate graphics sysfs access
tools/power turbostat: Remove unnecessary fflush() call
tools/power turbostat: Enhance platform divergence description
tools/power turbostat: Add initial support for GraniteRapids-D
tools/power turbostat: Remove PC3 support on Lunarlake
tools/power turbostat: Rename arl_features to lnl_features
tools/power turbostat: Add back PC8 support on Arrowlake
tools/power turbostat: Remove PC7/PC9 support on MTL
tools/power turbostat: Honor --show CPU, even when even when num_cpus=1
tools/power turbostat: Fix trailing '\n' parsing
tools/power turbostat: Allow using cpu device in perf counters on hybrid platforms
tools/power turbostat: Fix column printing for PMT xtal_time counters
tools/power turbostat: fix GCC9 build regression
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fix from Bjorn Helgaas:
- When removing a PCI device, only look up and remove a platform device
if there is an associated device node for which there could be a
platform device, to fix a merge window regression (Brian Norris)
* tag 'pci-v6.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/pwrctrl: Unregister platform device only if one actually exists
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull ima fix from Paul Moore:
"One small patch to fix a function parameter / local variable naming
snafu that went up to you in the current merge window"
* tag 'lsm-pr-20241129' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
ima: uncover hidden variable in ima_match_rules()
|
|
Pull more block updates from Jens Axboe:
- NVMe pull request via Keith:
- Use correct srcu list traversal (Breno)
- Scatter-gather support for metadata (Keith)
- Fabrics shutdown race condition fix (Nilay)
- Persistent reservations updates (Guixin)
- Add the required bits for MD atomic write support for raid0/1/10
- Correct return value for unknown opcode in ublk
- Fix deadlock with zone revalidation
- Fix for the io priority request vs bio cleanups
- Use the correct unsigned int type for various limit helpers
- Fix for a race in loop
- Cleanup blk_rq_prep_clone() to prevent uninit-value warning and make
it easier for actual humans to read
- Fix potential UAF when iterating tags
- A few fixes for bfq-iosched UAF issues
- Fix for brd discard not decrementing the allocated page count
- Various little fixes and cleanups
* tag 'block-6.13-20242901' of git://git.kernel.dk/linux: (36 commits)
brd: decrease the number of allocated pages which discarded
block, bfq: fix bfqq uaf in bfq_limit_depth()
block: Don't allow an atomic write be truncated in blkdev_write_iter()
mq-deadline: don't call req_get_ioprio from the I/O completion handler
block: Prevent potential deadlock in blk_revalidate_disk_zones()
block: Remove extra part pointer NULLify in blk_rq_init()
nvme: tuning pr code by using defined structs and macros
nvme: introduce change ptpl and iekey definition
block: return bool from get_disk_ro and bdev_read_only
block: remove a duplicate definition for bdev_read_only
block: return bool from blk_rq_aligned
block: return unsigned int from blk_lim_dma_alignment_and_pad
block: return unsigned int from queue_dma_alignment
block: return unsigned int from bdev_io_opt
block: req->bio is always set in the merge code
block: don't bother checking the data direction for merges
block: blk-mq: fix uninit-value in blk_rq_prep_clone and refactor
Revert "block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()"
md/raid10: Atomic write support
md/raid1: Atomic write support
...
|
