| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Don't just eat unknown keys without providing visual feedback and
instructions on how to see which ones are assigned.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/Z_TYux5fUg2pW-pF@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Don't just eat unknown keys without providing visual feedback and
instructions on how to see which ones are assigned.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/Z_TYux5fUg2pW-pF@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Will be used by the various browsers, looks like:
┌─Warning!───────────────────────────────────────────┐
29.15 │ 3c: cmpl $0x3,(%rbx) │ │
3.77 │ ↓ je 51 │'Ctrl+V' key not associated, use 'h' to see actions!│
16.59 │ movq 0x3b0(%rbx),%rdx │ │
30.65 │ movl 0x8(%rdx),%eax │ │
3.77 │ cmpl %eax,%edi │Press any key... │
0.25 │ ↓ jb 82 └────────────────────────────────────────────────────┘
Suggested-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/Z_TYux5fUg2pW-pF@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We'll use it to show unhandled keys in the various TUI browsers.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/Z_TYux5fUg2pW-pF@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Since dd317df072071903 ("perf build: Make binutil libraries opt in")
doesn't try to build with binutils libraries, so showing that it is OFF
when building causes just distraction, remove it from FEATURES_DISPLAY.
For people that for some reason notice that there is always 'perf -vv',
a short hand for 'perf version --build-options' and 'perf check feature
libbfd' that now explains why it is not built:
$ perf check feature libbfd
libbfd: [ OFF ] # HAVE_LIBBFD_SUPPORT ( tip: Deprecated, license incompatibility, use BUILD_NONDISTRO=1 and install binutils-dev[el] )
$
Fixes: dd317df072071903 ("perf build: Make binutil libraries opt in")
Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/Z--pWmTHGb62_83e@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There are still some cases, for instance to disassembly BPF code that
needs this, so until someone works on supporting that, we're keeping the
code but it is opt-in.
Make that clear on the 'perf version --build-options' and other ways to
query if a feature is present:
$ perf check feature libbfd
libbfd: [ OFF ] # HAVE_LIBBFD_SUPPORT ( tip: Deprecated, license incompatibility, use BUILD_NONDISTRO=1 and install binutils-dev[el] )
$ perf -vv | grep bfd
libbfd: [ OFF ] # HAVE_LIBBFD_SUPPORT ( tip: Deprecated, license incompatibility, use BUILD_NONDISTRO=1 and install binutils-dev[el] )
$
Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/Z_dkNDj9EPFwPqq1@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
While working on 'perf version --build-options' I noticed that:
$ perf version --build-options
perf version 6.15.rc1.g312a07a00d31
aio: [ on ] # HAVE_AIO_SUPPORT
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
bpf_skeletons: [ on ] # HAVE_BPF_SKEL
debuginfod: [ OFF ] # HAVE_DEBUGINFOD_SUPPORT
<SNIP>
And looking at tools/perf/Makefile.config I also noticed that it is not
opt-in, meaning we will attempt to build with it in all normal cases.
So add the usual warning at build time to let the user know that
something recommended is missing, now we see:
Makefile.config:563: No elfutils/debuginfod.h found, no debuginfo server support, please install elfutils-debuginfod-client-devel or equivalent
And after following the recommendation:
$ perf check feature debuginfod
debuginfod: [ on ] # HAVE_DEBUGINFOD_SUPPORT
$ ldd ~/bin/perf | grep debuginfo
libdebuginfod.so.1 => /lib64/libdebuginfod.so.1 (0x00007fee5cf5f000)
$
With this feature on several perf tools will fetch what is needed and
not require all the contents of the debuginfo packages, for instance:
# rpm -qa | grep kernel-debuginfo
# pahole --running_kernel_vmlinux
pahole: couldn't find a vmlinux that matches the running kernel
HINT: Maybe you're inside a container or missing a debuginfo package?
#
# perf trace -e open* perf probe --vars icmp_rcv
0.000 ( 0.005 ms): perf/97391 openat(dfd: CWD, filename: "/etc/ld.so.cache", flags: RDONLY|CLOEXEC) = 3
0.014 ( 0.004 ms): perf/97391 openat(dfd: CWD, filename: "/lib64/libm.so.6", flags: RDONLY|CLOEXEC) = 3
<SNIP>
32130.100 ( 0.008 ms): perf/97391 openat(dfd: CWD, filename: "/root/.cache/debuginfod_client/aa3c82b4a13f9c0e0301bebb20fe958c4db6f362/debuginfo") = 3
<SNIP>
Available variables at icmp_rcv
@<icmp_rcv+0>
struct sk_buff* skb
<SNIP>
#
# pahole --running_kernel_vmlinux
/root/.cache/debuginfod_client/aa3c82b4a13f9c0e0301bebb20fe958c4db6f362/debuginfo
# file /root/.cache/debuginfod_client/aa3c82b4a13f9c0e0301bebb20fe958c4db6f362/debuginfo
/root/.cache/debuginfod_client/aa3c82b4a13f9c0e0301bebb20fe958c4db6f362/debuginfo: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, BuildID[sha1]=aa3c82b4a13f9c0e0301bebb20fe958c4db6f362, with debug_info, not stripped
# ls -la /root/.cache/debuginfod_client/aa3c82b4a13f9c0e0301bebb20fe958c4db6f362/debuginfo
-r--------. 1 root root 475401512 Mar 27 21:00 /root/.cache/debuginfod_client/aa3c82b4a13f9c0e0301bebb20fe958c4db6f362/debuginfo
#
Then, cached:
# perf stat --null perf probe --vars icmp_rcv
Available variables at icmp_rcv
@<icmp_rcv+0>
struct sk_buff* skb
Performance counter stats for 'perf probe --vars icmp_rcv':
0.671389041 seconds time elapsed
0.519176000 seconds user
0.150860000 seconds sys
Fixes: c7a14fdcb3fa7736 ("perf build-ids: Fall back to debuginfod query if debuginfo not found")
Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Link: https://lore.kernel.org/r/Z_dkNDj9EPFwPqq1@gmail.com
[ Folded patch from Ingo to have the debian/ubuntu devel package added build warning message ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Since 13e17c9ff49119aa ("perf build: Make libunwind opt-in rather than
opt-out") doesn't try to build with libunwind, so showing that it is OFF
when building causes just distraction, remove it from FEATURES_DISPLAY.
For people that for some reason notice that there is always 'perf -vv',
a short hand for 'perf version --build-options' and 'perf check feature
libunwind' that now explains why it is not built:
$ perf check feature libunwind
libunwind: [ OFF ] # HAVE_LIBUNWIND_SUPPORT ( tip: Deprecated, use LIBUNWIND=1 and install libunwind-dev[el] to build with it )
$
Fixes: 13e17c9ff49119aa ("perf build: Make libunwind opt-in rather than opt-out")
Reported-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/Z--pWmTHGb62_83e@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Ingo reported that it was difficult to understand why libunwind support
didn't link even when he had the usual libunwind-dev files installed in
his machine.
This is because libunwind became opt-in, the user has to use
LIBUNWIND=1, as it was deemed stalled in its development/unsuitable for
use with perf, IIRC, and so we better use the elfutils equivalent
routine that we also supported for ages.
But the build message still printed:
Auto-detecting system features:
... libdw: [ on ]
... glibc: [ on ]
<SNIP>
... libcrypto: [ on ]
... libunwind: [ OFF ]
<SNIP>
Which is confusing, so allow for having a tip when 'perf version
--build-options' is used, and variants with 'perf check feature':
$ perf version --build-options | grep libunwind
libunwind: [ OFF ] # HAVE_LIBUNWIND_SUPPORT ( tip: Deprecated, use LIBUNWIND=1 and install libunwind-dev[el] to build with it )
$
$ perf check feature libunwind
libunwind: [ OFF ] # HAVE_LIBUNWIND_SUPPORT ( tip: Deprecated, use LIBUNWIND=1 and install libunwind-dev[el] to build with it )
$
The next patches will remove the opt-in libunwind FEATURES_DISPLAY.
Reported-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/Z--pWmTHGb62_83e@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It is just 'perf check' that uses that macro, to initialize the list of
features built into perf, so move it there.
This also avoids depending on things that are not included from
builtin.h, like is_builtin(), the CONFIG_ macros, etc, that are all
included in 'builtin-check.c' and before where this macro was moved to.
Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/Z_dkNDj9EPFwPqq1@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Both had the same open coded functions, share them so that we can add
tips for opt-in features such as libunwind, coresight, etc.
Examples of use:
$ perf check feature libcapstone
libcapstone: [ on ] # HAVE_LIBCAPSTONE_SUPPORT
$ perf check feature libunwind
libunwind: [ OFF ] # HAVE_LIBUNWIND_SUPPORT
$ perf version --build-options
perf version 6.15.rc1.g113e3df8ccc5
aio: [ on ] # HAVE_AIO_SUPPORT
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
bpf_skeletons: [ on ] # HAVE_BPF_SKEL
debuginfod: [ OFF ] # HAVE_DEBUGINFOD_SUPPORT
dwarf: [ on ] # HAVE_LIBDW_SUPPORT
dwarf_getlocations: [ on ] # HAVE_LIBDW_SUPPORT
dwarf-unwind: [ on ] # HAVE_DWARF_UNWIND_SUPPORT
auxtrace: [ on ] # HAVE_AUXTRACE_SUPPORT
libbfd: [ OFF ] # HAVE_LIBBFD_SUPPORT
libcapstone: [ on ] # HAVE_LIBCAPSTONE_SUPPORT
libcrypto: [ on ] # HAVE_LIBCRYPTO_SUPPORT
libdw-dwarf-unwind: [ on ] # HAVE_LIBDW_SUPPORT
libelf: [ on ] # HAVE_LIBELF_SUPPORT
libnuma: [ on ] # HAVE_LIBNUMA_SUPPORT
libopencsd: [ on ] # HAVE_CSTRACE_SUPPORT
libperl: [ on ] # HAVE_LIBPERL_SUPPORT
libpfm4: [ on ] # HAVE_LIBPFM
libpython: [ on ] # HAVE_LIBPYTHON_SUPPORT
libslang: [ on ] # HAVE_SLANG_SUPPORT
libtraceevent: [ on ] # HAVE_LIBTRACEEVENT
libunwind: [ OFF ] # HAVE_LIBUNWIND_SUPPORT
lzma: [ on ] # HAVE_LZMA_SUPPORT
numa_num_possible_cpus: [ on ] # HAVE_LIBNUMA_SUPPORT
zlib: [ on ] # HAVE_ZLIB_SUPPORT
zstd: [ on ] # HAVE_ZSTD_SUPPORT
$
Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/Z_Rz10stoLzBocIO@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The tools/build/feature/test-all.c file tries to detect the expected,
most common set of libraries/features we expect to have available to
build perf with.
At some point libunwind was deemed not to be part of that set of
libries, but the patches making it to be opt-in ended up forgetting some
details, fix one more.
Testing it:
$ rm -rf /tmp/build/$(basename $PWD)/ ; mkdir -p /tmp/build/$(basename $PWD)/
$ rpm -q libunwind-devel
libunwind-devel-1.8.0-3.fc40.x86_64
$ make -k LIBUNWIND=1 CORESIGHT=1 O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin |& grep unwind && ldd ~/bin/perf | grep unwind
... libunwind: [ on ]
CC /tmp/build/perf-tools-next/arch/x86/tests/dwarf-unwind.o
CC /tmp/build/perf-tools-next/arch/x86/util/unwind-libunwind.o
CC /tmp/build/perf-tools-next/util/arm64-frame-pointer-unwind-support.o
CC /tmp/build/perf-tools-next/tests/dwarf-unwind.o
CC /tmp/build/perf-tools-next/util/unwind-libunwind-local.o
CC /tmp/build/perf-tools-next/util/unwind-libunwind.o
libunwind-x86_64.so.8 => /lib64/libunwind-x86_64.so.8 (0x00007f615a549000)
libunwind.so.8 => /lib64/libunwind.so.8 (0x00007f615a52f000)
$ sudo rpm -e libunwind-devel
$ rm -rf /tmp/build/$(basename $PWD)/ ; mkdir -p /tmp/build/$(basename $PWD)/
$ make -k LIBUNWIND=1 CORESIGHT=1 O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin |& grep unwind && ldd ~/bin/perf | grep unwind
Makefile.config:653: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR
... libunwind: [ OFF ]
CC /tmp/build/perf-tools-next/arch/x86/tests/dwarf-unwind.o
CC /tmp/build/perf-tools-next/arch/x86/util/unwind-libdw.o
CC /tmp/build/perf-tools-next/util/arm64-frame-pointer-unwind-support.o
CC /tmp/build/perf-tools-next/tests/dwarf-unwind.o
CC /tmp/build/perf-tools-next/util/unwind-libdw.o
$
Should be in a separate patch, but tired now, so also adding a message
about the need to use LIBUNWIND=1 in the output when its not available,
so done here as well.
So, now when the devel files are not available we get:
$ make -k LIBUNWIND=1 CORESIGHT=1 O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin |& grep unwind && ldd ~/bin/perf | grep unwind
Makefile.config:653: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR and set LIBUNWIND=1 in the make command line as it is opt-in now
... libunwind: [ OFF ]
$
Fixes: 13e17c9ff49119aa ("perf build: Make libunwind opt-in rather than opt-out")
Reported-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/Z_AnsW9oJzFbhIFC@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The 'read_write_len_ext' field in 'struct ethtool_cmis_cdb_cmd_args'
stores the maximum number of bytes that can be read from or written to
the Local Payload (LPL) page in a single multi-byte access.
Cited commit started overwriting this field with the maximum number of
bytes that can be read from or written to the Extended Payload (LPL)
pages in a single multi-byte access. Transceiver modules that support
auto paging can advertise a number larger than 255 which is problematic
as 'read_write_len_ext' is a 'u8', resulting in the number getting
truncated and firmware flashing failing [1].
Fix by ignoring the maximum EPL access size as the kernel does not
currently support auto paging (even if the transceiver module does) and
will not try to read / write more than 128 bytes at once.
[1]
Transceiver module firmware flashing started for device enp177s0np0
Transceiver module firmware flashing in progress for device enp177s0np0
Progress: 0%
Transceiver module firmware flashing encountered an error for device enp177s0np0
Status message: Write FW block EPL command failed, LPL length is longer
than CDB read write length extension allows.
Fixes: 9a3b0d078bd8 ("net: ethtool: Add support for writing firmware blocks using EPL payload")
Reported-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Closes: https://lore.kernel.org/netdev/20250402183123.321036-3-michael.chan@broadcom.com/
Tested-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250409112440.365672-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
An error message is already emitted by the driver core function
call_driver_probe() when the driver probe fails. Therefore, this
redundant probe error message is removed.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://patch.msgid.link/20250410-spi-v1-2-56e867cc19cf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 40369bfe717e ("spi: fsl-qspi: use devm function instead of driver
remove") introduced managed cleanup via fsl_qspi_cleanup(), but
incorrectly retain manual cleanup in two scenarios:
- On devm_add_action_or_reset() failure, the function automatically call
fsl_qspi_cleanup(). However, the current code still jumps to
err_destroy_mutex, repeating cleanup.
- After the fsl_qspi_cleanup() action is added successfully, there is no
need to manually perform the cleanup in the subsequent error path.
However, the current code still jumps to err_destroy_mutex on spi
controller failure, repeating cleanup.
Skip redundant manual cleanup calls to fix these issues.
Cc: stable@vger.kernel.org
Fixes: 40369bfe717e ("spi: fsl-qspi: use devm function instead of driver remove")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://patch.msgid.link/20250410-spi-v1-1-56e867cc19cf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains a Netfilter fix and improved test coverage:
1) Fix AVX2 matching in nft_pipapo, from Florian Westphal.
2) Extend existing test to improve coverage for the aforementioned bug,
also from Florian.
netfilter pull request 25-04-10
* tag 'nf-25-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: add test case for recent mismatch bug
nft_set_pipapo: fix incorrect avx2 match of 5th field octet
====================
Link: https://patch.msgid.link/20250410103647.1030244-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Without 'nft_set_pipapo: fix incorrect avx2 match of 5th field octet"
this fails:
TEST: reported issues
Add two elements, flush, re-add 1s [ OK ]
net,mac with reload 0s [ OK ]
net,port,proto 3s [ OK ]
avx2 false match 0s [FAIL]
False match for fe80:dead:01fe:0a02:0b03:6007:8009:a001
Other tests do not detect the kernel bug as they only alter parts in
the /64 netmask.
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Given a set element like:
icmpv6 . dead:beef:00ff::1
The value of 'ff' is irrelevant, any address will be matched
as long as the other octets are the same.
This is because of too-early register clobbering:
ymm7 is reloaded with new packet data (pkt[9]) but it still holds data
of an earlier load that wasn't processed yet.
The existing tests in nft_concat_range.sh selftests do exercise this code
path, but do not trigger incorrect matching due to the network prefix
limitation.
Fixes: 7400b063969b ("nft_set_pipapo: Introduce AVX2-based lookup implementation")
Reported-by: sontu mazumdar <sontu21@gmail.com>
Closes: https://lore.kernel.org/netfilter/CANgxkqwnMH7fXra+VUfODT-8+qFLgskq3set1cAzqqJaV4iEZg@mail.gmail.com/T/#t
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Ensure we have enough data in linear buffer from skb before accessing
initial bytes. This prevents potential out-of-bounds accesses
when processing short packets.
When ppp_sync_txmung receives an incoming package with an empty
payload:
(remote) gef➤ p *(struct pppoe_hdr *) (skb->head + skb->network_header)
$18 = {
type = 0x1,
ver = 0x1,
code = 0x0,
sid = 0x2,
length = 0x0,
tag = 0xffff8880371cdb96
}
from the skb struct (trimmed)
tail = 0x16,
end = 0x140,
head = 0xffff88803346f400 "4",
data = 0xffff88803346f416 ":\377",
truesize = 0x380,
len = 0x0,
data_len = 0x0,
mac_len = 0xe,
hdr_len = 0x0,
it is not safe to access data[2].
Reported-by: syzbot+29fc8991b0ecb186cf40@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=29fc8991b0ecb186cf40
Tested-by: syzbot+29fc8991b0ecb186cf40@syzkaller.appspotmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Arnaud Lecomte <contact@arnaud-lcm.com>
Link: https://patch.msgid.link/20250408-bound-checking-ppp_txmung-v2-1-94bb6e1b92d0@arnaud-lcm.com
[pabeni@redhat.com: fixed subj typo]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Compiling the kernel with gcc12.3 W=2 results in shadowing warnings:
warning: declaration of '__pptr' shadows a previous local [-Wshadow]
const struct { type x; } __packed *__pptr = (typeof(__pptr))(ptr);
note: in definition of macro '__put_unaligned_t'
__pptr->x = (val);
note: in expansion of macro '__get_unaligned_t'
__put_unaligned_t(type, __get_unaligned_t(type, src), dst);
__get_unaligned_t() and __put_unaligned_t() use a local variable named
'__pptr', which can lead to variable shadowing when these macros are used in
the same scope. This results in a -Wshadow warning during compilation.
To address this issue, rename the local variables within the macros to
ensure uniqueness.
Signed-off-by: Peng Jiang <jiang.peng9@zte.com.cn>
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250324191230477zpGtgIRSH4mEHdtxGtgx9@zte.com.cn
|
|
Use cfg->ctrl_ops->io_init callback make it work for all platform.
And it's also gets rid of code duplication
Fixes: 3f60dbd40d3f ("drm/rockchip: dw_hdmi_qp: Add platform ctrl callback")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250317102757.565679-1-andyshrk@163.com
|
|
This is a copy-paste error, which affects DP1 usage.
Fixes: 328e6885996c ("drm/rockchip: vop2: Add platform specific callback")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250312064218.524143-1-andyshrk@163.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.15-2025-04-09:
amdgpu:
- MES FW version caching fixes
- Only use GTT as a fallback if we already have a backing store
- dma_buf fix
- IP discovery fix
- Replay and PSR with VRR fix
- DC FP fixes
- eDP fixes
- KIQ TLB invalidate fix
- Enable dmem groups support
- Allow pinning VRAM dma bufs if imports can do P2P
- Workload profile fixes
- Prevent possible division by 0 in fan handling
amdkfd:
- Queue reset fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250409165238.1180153-1-alexander.deucher@amd.com
|
|
Remove duplicate code in function z_erofs_register_pcluster()
Signed-off-by: Bo Liu <liubo03@inspur.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250410042048.3044-2-liubo03@inspur.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Two new file system attributes were recently added. See MS-FSCC 2.5.1:
FILE_SUPPORTS_POSIX_UNLINK_RENAME and
FILE_RETURNS_CLEANUP_RESULT_INFO
Update the missing defines for ksmbd and cifs.ko
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
drm/i915 fixes for v6.15-rc2:
- Fix scanline offset for LNL+ and BMG+
- Fix GVT unterminated-string-initialization build warning
- Fix DP rate limit when sink doesn't support TPS4
- Handle GDDR + ECC memory type detection
- Fix VRR parameter change check
- Fix fence not released on early probe errors
- Disable render power gating during live selftests
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/87lds9wlpq.fsf@intel.com
|
|
Willem de Bruijn says:
====================
support SKF_NET_OFF and SKF_LL_OFF on skb frags
From: Willem de Bruijn <willemb@google.com>
Address a longstanding issue that may lead to missed packets
depending on system configuration.
Ensure that reading from packet contents works regardless of skb
geometry, also when using the special SKF_.. negative offsets to
offset from L2 or L3 header.
Patch 2 is the selftest for the fix.
v2->v3
- do not remove bpf_internal_load_pointer_neg_helper, because it
is still used in the sparc32 JIT
v1->v2
- introduce bfp_skb_load_helper_convert_offset to avoid open
coding
- selftest: add comment why early demux must be disabled
v2: https://lore.kernel.org/netdev/20250404142633.1955847-1-willemdebruijn.kernel@gmail.com/
v1: https://lore.kernel.org/netdev/20250403140846.1268564-1-willemdebruijn.kernel@gmail.com/
====================
Link: https://patch.msgid.link/20250408132833.195491-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Verify that a classic BPF linux socket filter correctly matches
packet contents. Including when accessing contents in an
skb_frag.
1. Open a SOCK_RAW socket with a classic BPF filter on UDP dport 8000.
2. Open a tap device with IFF_NAPI_FRAGS to inject skbs with frags.
3. Send a packet for which the UDP header is in frag[0].
4. Receive this packet to demonstrate that the socket accepted it.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20250408132833.195491-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Classic BPF socket filters with SKB_NET_OFF and SKB_LL_OFF fail to
read when these offsets extend into frags.
This has been observed with iwlwifi and reproduced with tun with
IFF_NAPI_FRAGS. The below straightforward socket filter on UDP port,
applied to a RAW socket, will silently miss matching packets.
const int offset_proto = offsetof(struct ip6_hdr, ip6_nxt);
const int offset_dport = sizeof(struct ip6_hdr) + offsetof(struct udphdr, dest);
struct sock_filter filter_code[] = {
BPF_STMT(BPF_LD + BPF_B + BPF_ABS, SKF_AD_OFF + SKF_AD_PKTTYPE),
BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, PACKET_HOST, 0, 4),
BPF_STMT(BPF_LD + BPF_B + BPF_ABS, SKF_NET_OFF + offset_proto),
BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, IPPROTO_UDP, 0, 2),
BPF_STMT(BPF_LD + BPF_H + BPF_ABS, SKF_NET_OFF + offset_dport),
This is unexpected behavior. Socket filter programs should be
consistent regardless of environment. Silent misses are
particularly concerning as hard to detect.
Use skb_copy_bits for offsets outside linear, same as done for
non-SKF_(LL|NET) offsets.
Offset is always positive after subtracting the reference threshold
SKB_(LL|NET)_OFF, so is always >= skb_(mac|network)_offset. The sum of
the two is an offset against skb->data, and may be negative, but it
cannot point before skb->head, as skb_(mac|network)_offset would too.
This appears to go back to when frag support was introduced to
sk_run_filter in linux-2.4.4, before the introduction of git.
The amount of code change and 8/16/32 bit duplication are unfortunate.
But any attempt I made to be smarter saved very few LoC while
complicating the code.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/netdev/20250122200402.3461154-1-maze@google.com/
Link: https://elixir.bootlin.com/linux/2.4.4/source/net/core/filter.c#L244
Reported-by: Matt Moeller <moeller.matt@gmail.com>
Co-developed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20250408132833.195491-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When I ran the repro [0] and waited a few seconds, I observed two
LOCKDEP splats: a warning immediately followed by a null-ptr-deref. [1]
Reproduction Steps:
1) Mount CIFS
2) Add an iptables rule to drop incoming FIN packets for CIFS
3) Unmount CIFS
4) Unload the CIFS module
5) Remove the iptables rule
At step 3), the CIFS module calls sock_release() for the underlying
TCP socket, and it returns quickly. However, the socket remains in
FIN_WAIT_1 because incoming FIN packets are dropped.
At this point, the module's refcnt is 0 while the socket is still
alive, so the following rmmod command succeeds.
# ss -tan
State Recv-Q Send-Q Local Address:Port Peer Address:Port
FIN-WAIT-1 0 477 10.0.2.15:51062 10.0.0.137:445
# lsmod | grep cifs
cifs 1159168 0
This highlights a discrepancy between the lifetime of the CIFS module
and the underlying TCP socket. Even after CIFS calls sock_release()
and it returns, the TCP socket does not die immediately in order to
close the connection gracefully.
While this is generally fine, it causes an issue with LOCKDEP because
CIFS assigns a different lock class to the TCP socket's sk->sk_lock
using sock_lock_init_class_and_name().
Once an incoming packet is processed for the socket or a timer fires,
sk->sk_lock is acquired.
Then, LOCKDEP checks the lock context in check_wait_context(), where
hlock_class() is called to retrieve the lock class. However, since
the module has already been unloaded, hlock_class() logs a warning
and returns NULL, triggering the null-ptr-deref.
If LOCKDEP is enabled, we must ensure that a module calling
sock_lock_init_class_and_name() (CIFS, NFS, etc) cannot be unloaded
while such a socket is still alive to prevent this issue.
Let's hold the module reference in sock_lock_init_class_and_name()
and release it when the socket is freed in sk_prot_free().
Note that sock_lock_init() clears sk->sk_owner for svc_create_socket()
that calls sock_lock_init_class_and_name() for a listening socket,
which clones a socket by sk_clone_lock() without GFP_ZERO.
[0]:
CIFS_SERVER="10.0.0.137"
CIFS_PATH="//${CIFS_SERVER}/Users/Administrator/Desktop/CIFS_TEST"
DEV="enp0s3"
CRED="/root/WindowsCredential.txt"
MNT=$(mktemp -d /tmp/XXXXXX)
mount -t cifs ${CIFS_PATH} ${MNT} -o vers=3.0,credentials=${CRED},cache=none,echo_interval=1
iptables -A INPUT -s ${CIFS_SERVER} -j DROP
for i in $(seq 10);
do
umount ${MNT}
rmmod cifs
sleep 1
done
rm -r ${MNT}
iptables -D INPUT -s ${CIFS_SERVER} -j DROP
[1]:
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 10 PID: 0 at kernel/locking/lockdep.c:234 hlock_class (kernel/locking/lockdep.c:234 kernel/locking/lockdep.c:223)
Modules linked in: cifs_arc4 nls_ucs2_utils cifs_md4 [last unloaded: cifs]
CPU: 10 UID: 0 PID: 0 Comm: swapper/10 Not tainted 6.14.0 #36
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:hlock_class (kernel/locking/lockdep.c:234 kernel/locking/lockdep.c:223)
...
Call Trace:
<IRQ>
__lock_acquire (kernel/locking/lockdep.c:4853 kernel/locking/lockdep.c:5178)
lock_acquire (kernel/locking/lockdep.c:469 kernel/locking/lockdep.c:5853 kernel/locking/lockdep.c:5816)
_raw_spin_lock_nested (kernel/locking/spinlock.c:379)
tcp_v4_rcv (./include/linux/skbuff.h:1678 ./include/net/tcp.h:2547 net/ipv4/tcp_ipv4.c:2350)
...
BUG: kernel NULL pointer dereference, address: 00000000000000c4
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 10 UID: 0 PID: 0 Comm: swapper/10 Tainted: G W 6.14.0 #36
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:__lock_acquire (kernel/locking/lockdep.c:4852 kernel/locking/lockdep.c:5178)
Code: 15 41 09 c7 41 8b 44 24 20 25 ff 1f 00 00 41 09 c7 8b 84 24 a0 00 00 00 45 89 7c 24 20 41 89 44 24 24 e8 e1 bc ff ff 4c 89 e7 <44> 0f b6 b8 c4 00 00 00 e8 d1 bc ff ff 0f b6 80 c5 00 00 00 88 44
RSP: 0018:ffa0000000468a10 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ff1100010091cc38 RCX: 0000000000000027
RDX: ff1100081f09ca48 RSI: 0000000000000001 RDI: ff1100010091cc88
RBP: ff1100010091c200 R08: ff1100083fe6e228 R09: 00000000ffffbfff
R10: ff1100081eca0000 R11: ff1100083fe10dc0 R12: ff1100010091cc88
R13: 0000000000000001 R14: 0000000000000000 R15: 00000000000424b1
FS: 0000000000000000(0000) GS:ff1100081f080000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000c4 CR3: 0000000002c4a003 CR4: 0000000000771ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
lock_acquire (kernel/locking/lockdep.c:469 kernel/locking/lockdep.c:5853 kernel/locking/lockdep.c:5816)
_raw_spin_lock_nested (kernel/locking/spinlock.c:379)
tcp_v4_rcv (./include/linux/skbuff.h:1678 ./include/net/tcp.h:2547 net/ipv4/tcp_ipv4.c:2350)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205 (discriminator 1))
ip_local_deliver_finish (./include/linux/rcupdate.h:878 net/ipv4/ip_input.c:234)
ip_sublist_rcv_finish (net/ipv4/ip_input.c:576)
ip_list_rcv_finish (net/ipv4/ip_input.c:628)
ip_list_rcv (net/ipv4/ip_input.c:670)
__netif_receive_skb_list_core (net/core/dev.c:5939 net/core/dev.c:5986)
netif_receive_skb_list_internal (net/core/dev.c:6040 net/core/dev.c:6129)
napi_complete_done (./include/linux/list.h:37 ./include/net/gro.h:519 ./include/net/gro.h:514 net/core/dev.c:6496)
e1000_clean (drivers/net/ethernet/intel/e1000/e1000_main.c:3815)
__napi_poll.constprop.0 (net/core/dev.c:7191)
net_rx_action (net/core/dev.c:7262 net/core/dev.c:7382)
handle_softirqs (kernel/softirq.c:561)
__irq_exit_rcu (kernel/softirq.c:596 kernel/softirq.c:435 kernel/softirq.c:662)
irq_exit_rcu (kernel/softirq.c:680)
common_interrupt (arch/x86/kernel/irq.c:280 (discriminator 14))
</IRQ>
<TASK>
asm_common_interrupt (./arch/x86/include/asm/idtentry.h:693)
RIP: 0010:default_idle (./arch/x86/include/asm/irqflags.h:37 ./arch/x86/include/asm/irqflags.h:92 arch/x86/kernel/process.c:744)
Code: 4c 01 c7 4c 29 c2 e9 72 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa eb 07 0f 00 2d c3 2b 15 00 fb f4 <fa> c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90
RSP: 0018:ffa00000000ffee8 EFLAGS: 00000202
RAX: 000000000000640b RBX: ff1100010091c200 RCX: 0000000000061aa4
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff812f30c5
RBP: 000000000000000a R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000002 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
? do_idle (kernel/sched/idle.c:186 kernel/sched/idle.c:325)
default_idle_call (./include/linux/cpuidle.h:143 kernel/sched/idle.c:118)
do_idle (kernel/sched/idle.c:186 kernel/sched/idle.c:325)
cpu_startup_entry (kernel/sched/idle.c:422 (discriminator 1))
start_secondary (arch/x86/kernel/smpboot.c:315)
common_startup_64 (arch/x86/kernel/head_64.S:421)
</TASK>
Modules linked in: cifs_arc4 nls_ucs2_utils cifs_md4 [last unloaded: cifs]
CR2: 00000000000000c4
Fixes: ed07536ed673 ("[PATCH] lockdep: annotate nfs/nfsd in-kernel sockets")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250407163313.22682-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A nexthop is only chosen when the calculated multipath hash falls in the
nexthop's hash region (i.e., the hash is smaller than the nexthop's hash
threshold) and when the nexthop is assigned a non-negative score by
rt6_score_route().
Commit 4d0ab3a6885e ("ipv6: Start path selection from the first
nexthop") introduced an unintentional difference between the first
nexthop and the rest when the score is negative.
When the first nexthop matches, but has a negative score, the code will
currently evaluate subsequent nexthops until one is found with a
non-negative score. On the other hand, when a different nexthop matches,
but has a negative score, the code will fallback to the nexthop with
which the selection started ('match').
Align the behavior across all nexthops and fallback to 'match' when the
first nexthop matches, but has a negative score.
Fixes: 3d709f69a3e7 ("ipv6: Use hash-threshold instead of modulo-N")
Fixes: 4d0ab3a6885e ("ipv6: Start path selection from the first nexthop")
Reported-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Closes: https://lore.kernel.org/netdev/67efef607bc41_1ddca82948c@willemb.c.googlers.com.notmuch/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250408084316.243559-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
phylink-controlled PHY
DSA has 2 kinds of drivers:
1. Those who call dsa_switch_suspend() and dsa_switch_resume() from
their device PM ops: qca8k-8xxx, bcm_sf2, microchip ksz
2. Those who don't: all others. The above methods should be optional.
For type 1, dsa_switch_suspend() calls dsa_user_suspend() -> phylink_stop(),
and dsa_switch_resume() calls dsa_user_resume() -> phylink_start().
These seem good candidates for setting mac_managed_pm = true because
that is essentially its definition [1], but that does not seem to be the
biggest problem for now, and is not what this change focuses on.
Talking strictly about the 2nd category of DSA drivers here (which
do not have MAC managed PM, meaning that for their attached PHYs,
mdio_bus_phy_suspend() and mdio_bus_phy_resume() should run in full),
I have noticed that the following warning from mdio_bus_phy_resume() is
triggered:
WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY &&
phydev->state != PHY_UP);
because the PHY state machine is running.
It's running as a result of a previous dsa_user_open() -> ... ->
phylink_start() -> phy_start() having been initiated by the user.
The previous mdio_bus_phy_suspend() was supposed to have called
phy_stop_machine(), but it didn't. So this is why the PHY is in state
PHY_NOLINK by the time mdio_bus_phy_resume() runs.
mdio_bus_phy_suspend() did not call phy_stop_machine() because for
phylink, the phydev->adjust_link function pointer is NULL. This seems a
technicality introduced by commit fddd91016d16 ("phylib: fix PAL state
machine restart on resume"). That commit was written before phylink
existed, and was intended to avoid crashing with consumer drivers which
don't use the PHY state machine - phylink always does, when using a PHY.
But phylink itself has historically not been developed with
suspend/resume in mind, and apparently not tested too much in that
scenario, allowing this bug to exist unnoticed for so long. Plus, prior
to the WARN_ON(), it would have likely been invisible.
This issue is not in fact restricted to type 2 DSA drivers (according to
the above ad-hoc classification), but can be extrapolated to any MAC
driver with phylink and MDIO-bus-managed PHY PM ops. DSA is just where
the issue was reported. Assuming mac_managed_pm is set correctly, a
quick search indicates the following other drivers might be affected:
$ grep -Zlr PHYLINK_NETDEV drivers/ | xargs -0 grep -L mac_managed_pm
drivers/net/ethernet/atheros/ag71xx.c
drivers/net/ethernet/microchip/sparx5/sparx5_main.c
drivers/net/ethernet/microchip/lan966x/lan966x_main.c
drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
drivers/net/ethernet/freescale/ucc_geth.c
drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
drivers/net/ethernet/marvell/mvneta.c
drivers/net/ethernet/marvell/prestera/prestera_main.c
drivers/net/ethernet/mediatek/mtk_eth_soc.c
drivers/net/ethernet/altera/altera_tse_main.c
drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
drivers/net/ethernet/meta/fbnic/fbnic_phylink.c
drivers/net/ethernet/tehuti/tn40_phy.c
drivers/net/ethernet/mscc/ocelot_net.c
Make the existing conditions dependent on the PHY device having a
phydev->phy_link_change() implementation equal to the default
phy_link_change() provided by phylib. Otherwise, we implicitly know that
the phydev has the phylink-provided phylink_phy_change() callback, and
when phylink is used, the PHY state machine always needs to be stopped/
started on the suspend/resume path. The code is structured as such that
if phydev->phy_link_change() is absent, it is a matter of time until the
kernel will crash - no need to further complicate the test.
Thus, for the situation where the PM is not managed by the MAC, we will
make the MDIO bus PM ops treat identically the phylink-controlled PHYs
with the phylib-controlled PHYs where an adjust_link() callback is
supplied. In both cases, the MDIO bus PM ops should stop and restart the
PHY state machine.
[1] https://lore.kernel.org/netdev/Z-1tiW9zjcoFkhwc@shell.armlinux.org.uk/
Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Reported-by: Wei Fang <wei.fang@nxp.com>
Tested-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250407094042.2155633-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In an upcoming change, mdio_bus_phy_may_suspend() will need to
distinguish a phylib-based PHY client from a phylink PHY client.
For that, it will need to compare the phydev->phy_link_change() function
pointer with the eponymous phy_link_change() provided by phylib.
To avoid forward function declarations, the default PHY link state
change method should be moved upwards. There is no functional change
associated with this patch, it is only to reduce the noise from a real
bug fix.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250407093900.2155112-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
- Fixes tpm2, futex, and mincore tests
- Create a dedicated .gitignore for tpm2 tests
* tag 'linux_kselftest-fixes-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/mincore: Allow read-ahead pages to reach the end of the file
selftests/futex: futex_waitv wouldblock test should fail
selftests: tpm2: test_smoke: use POSIX-conformant expression operator
selftests: tpm2: create a dedicated .gitignore
|
|
When reparse point in SMB1 query_path_info() callback was detected then
query also for EA $LXDEV. In this EA are stored device major and minor
numbers used by WSL CHR and BLK reparse points. Without major and minor
numbers, stat() syscall does not work for char and block devices.
Similar code is already in SMB2+ query_path_info() callback function.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
buffer
Parsing reparse point buffer is generic for all SMB versions and is already
implemented by global function parse_reparse_point().
Getting reparse point buffer from the SMB response is SMB version specific,
so introduce for it a new callback get_reparse_point_buffer.
This functionality split is needed for followup change - getting reparse
point buffer without parsing it.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Like previous changes for file inode.c, handle directory name surrogate
reparse points generally also in reparse.c.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
IO_REPARSE_TAG_MOUNT_POINT is just a specific case of directory Name
Surrogate reparse point. As reparse_info_to_fattr() already handles all
directory Name Surrogate reparse point (done by the previous change),
there is no need to have explicit case for IO_REPARSE_TAG_MOUNT_POINT.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
tick_freeze() acquires a raw spinlock (tick_freeze_lock). Later in the
callchain (timekeeping_suspend() -> mc146818_avoid_UIP()) the RTC driver
acquires a spinlock which becomes a sleeping lock on PREEMPT_RT. Lockdep
complains about this lock nesting.
Add a lockdep override for this special case and a comment explaining
why it is okay.
Reported-by: Borislav Petkov <bp@alien8.de>
Reported-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250404133429.pnAzf-eF@linutronix.de
Closes: https://lore.kernel.org/all/20250330113202.GAZ-krsjAnurOlTcp-@fat_crate.local/
Closes: https://lore.kernel.org/all/CAP-bSRZ0CWyZZsMtx046YV8L28LhY0fson2g4EqcwRAVN1Jk+Q@mail.gmail.com/
|
|
Todd reported, and Len confirmed, that commit 582077c94052 ("x86/cfi:
Clean up linkage") broke S4 hiberate on a fair number of machines.
Turns out these machines trip #CP when trying to restore the image.
As it happens, the commit in question removes two ENDBR instructions
in the hibernate code, and clearly got it wrong.
Notably restore_image() does an indirect jump to
relocated_restore_code(), which is a relocated copy of
core_restore_code().
In turn, core_restore_code(), will at the end do an indirect jump to
restore_jump_address (r8), which is pointing at a relocated
restore_registers().
So both sites do indeed need to be ENDBR.
Fixes: 582077c94052 ("x86/cfi: Clean up linkage")
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Todd Brandt <todd.e.brandt@intel.com>
Tested-by: Len Brown <len.brown@intel.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219998
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219998
|
|
The "function" field of struct hrtimer has been changed to private, but
two instances have not been converted to use ACCESS_PRIVATE().
Convert them to use ACCESS_PRIVATE().
Fixes: 04257da0c99c ("hrtimers: Make callback function pointer private")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250408103854.1851093-1-namcao@linutronix.de
Closes: https://lore.kernel.org/oe-kbuild-all/202504071931.vOVl13tt-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202504072155.5UAZjYGU-lkp@intel.com/
|
|
Like in UNICODE mode, SMB1 Session Setup Kerberos Request contains oslm and
domain strings.
Extract common code into ascii_oslm_strings() and ascii_domain_string()
functions (similar to unicode variants) and use these functions in
non-UNICODE code path in sess_auth_kerberos().
Decision if non-UNICODE or UNICODE mode is used is based on the
SMBFLG2_UNICODE flag in Flags2 packed field, and not based on the
capabilities of server. Fix this check too.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
syzkaller triggered an oversized kvmalloc() warning.
Silence it by adding __GFP_NOWARN.
syzkaller log:
WARNING: CPU: 7 PID: 518 at mm/util.c:665 __kvmalloc_node_noprof+0x175/0x180
CPU: 7 UID: 0 PID: 518 Comm: c_repro Not tainted 6.11.0-rc6+ #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:__kvmalloc_node_noprof+0x175/0x180
RSP: 0018:ffffc90001e67c10 EFLAGS: 00010246
RAX: 0000000000000100 RBX: 0000000000000400 RCX: ffffffff8149d46b
RDX: 0000000000000000 RSI: ffff8881030fae80 RDI: 0000000000000002
RBP: 000000712c800000 R08: 0000000000000100 R09: 0000000000000000
R10: ffffc90001e67c10 R11: 0030ae0601000000 R12: 0000000000000000
R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000
FS: 00007fde79159740(0000) GS:ffff88813bdc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000180 CR3: 0000000105eb4005 CR4: 00000000003706b0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ib_umem_odp_get+0x1f6/0x390
mlx5_ib_reg_user_mr+0x1e8/0x450
ib_uverbs_reg_mr+0x28b/0x440
ib_uverbs_write+0x7d3/0xa30
vfs_write+0x1ac/0x6c0
ksys_write+0x134/0x170
? __sanitizer_cov_trace_pc+0x1c/0x50
do_syscall_64+0x50/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 37824952dc8f ("RDMA/odp: Use kvcalloc for the dma_list and page_list")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Link: https://patch.msgid.link/c6cb92379de668be94894f49c2cfa40e73f94d56.1742388096.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The following causes a vsnprintf fault:
# echo 's:wake_lat char[] wakee; u64 delta;' >> /sys/kernel/tracing/dynamic_events
# echo 'hist:keys=pid:ts=common_timestamp.usecs if !(common_flags & 0x18)' > /sys/kernel/tracing/events/sched/sched_waking/trigger
# echo 'hist:keys=next_pid:delta=common_timestamp.usecs-$ts:onmatch(sched.sched_waking).trace(wake_lat,next_comm,$delta)' > /sys/kernel/tracing/events/sched/sched_switch/trigger
Because the synthetic event's "wakee" field is created as a dynamic string
(even though the string copied is not). The print format to print the
dynamic string changed from "%*s" to "%s" because another location
(__set_synth_event_print_fmt()) exported this to user space, and user
space did not need that. But it is still used in print_synth_event(), and
the output looks like:
<idle>-0 [001] d..5. 193.428167: wake_lat: wakee=(efault)sshd-sessiondelta=155
sshd-session-879 [001] d..5. 193.811080: wake_lat: wakee=(efault)kworker/u34:5delta=58
<idle>-0 [002] d..5. 193.811198: wake_lat: wakee=(efault)bashdelta=91
bash-880 [002] d..5. 193.811371: wake_lat: wakee=(efault)kworker/u35:2delta=21
<idle>-0 [001] d..5. 193.811516: wake_lat: wakee=(efault)sshd-sessiondelta=129
sshd-session-879 [001] d..5. 193.967576: wake_lat: wakee=(efault)kworker/u34:5delta=50
The length isn't needed as the string is always nul terminated. Just print
the string and not add the length (which was hard coded to the max string
length anyway).
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250407154139.69955768@gandalf.local.home
Fixes: 4d38328eb442d ("tracing: Fix synth event printk format for str fields");
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
After commit f7025d861694 ("smb: client: allocate crypto only for
primary server") and commit b0abcd65ec54 ("smb: client: fix UAF in
async decryption"), the channels started reusing AEAD TFM from primary
channel to perform synchronous decryption, but that can't done as
there could be multiple cifsd threads (one per channel) simultaneously
accessing it to perform decryption.
This fixes the following KASAN splat when running fstest generic/249
with 'vers=3.1.1,multichannel,max_channels=4,seal' against Windows
Server 2022:
BUG: KASAN: slab-use-after-free in gf128mul_4k_lle+0xba/0x110
Read of size 8 at addr ffff8881046c18a0 by task cifsd/986
CPU: 3 UID: 0 PID: 986 Comm: cifsd Not tainted 6.15.0-rc1 #1
PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-3.fc41
04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
print_report+0x156/0x528
? gf128mul_4k_lle+0xba/0x110
? __virt_addr_valid+0x145/0x300
? __phys_addr+0x46/0x90
? gf128mul_4k_lle+0xba/0x110
kasan_report+0xdf/0x1a0
? gf128mul_4k_lle+0xba/0x110
gf128mul_4k_lle+0xba/0x110
ghash_update+0x189/0x210
shash_ahash_update+0x295/0x370
? __pfx_shash_ahash_update+0x10/0x10
? __pfx_shash_ahash_update+0x10/0x10
? __pfx_extract_iter_to_sg+0x10/0x10
? ___kmalloc_large_node+0x10e/0x180
? __asan_memset+0x23/0x50
crypto_ahash_update+0x3c/0xc0
gcm_hash_assoc_remain_continue+0x93/0xc0
crypt_message+0xe09/0xec0 [cifs]
? __pfx_crypt_message+0x10/0x10 [cifs]
? _raw_spin_unlock+0x23/0x40
? __pfx_cifs_readv_from_socket+0x10/0x10 [cifs]
decrypt_raw_data+0x229/0x380 [cifs]
? __pfx_decrypt_raw_data+0x10/0x10 [cifs]
? __pfx_cifs_read_iter_from_socket+0x10/0x10 [cifs]
smb3_receive_transform+0x837/0xc80 [cifs]
? __pfx_smb3_receive_transform+0x10/0x10 [cifs]
? __pfx___might_resched+0x10/0x10
? __pfx_smb3_is_transform_hdr+0x10/0x10 [cifs]
cifs_demultiplex_thread+0x692/0x1570 [cifs]
? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs]
? rcu_is_watching+0x20/0x50
? rcu_lockdep_current_cpu_online+0x62/0xb0
? find_held_lock+0x32/0x90
? kvm_sched_clock_read+0x11/0x20
? local_clock_noinstr+0xd/0xd0
? trace_irq_enable.constprop.0+0xa8/0xe0
? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs]
kthread+0x1fe/0x380
? kthread+0x10f/0x380
? __pfx_kthread+0x10/0x10
? local_clock_noinstr+0xd/0xd0
? ret_from_fork+0x1b/0x60
? local_clock+0x15/0x30
? lock_release+0x29b/0x390
? rcu_is_watching+0x20/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Tested-by: David Howells <dhowells@redhat.com>
Reported-by: Steve French <stfrench@microsoft.com>
Closes: https://lore.kernel.org/r/CAH2r5mu6Yc0-RJXM3kFyBYUB09XmXBrNodOiCVR4EDrmxq5Szg@mail.gmail.com
Fixes: f7025d861694 ("smb: client: allocate crypto only for primary server")
Fixes: b0abcd65ec54 ("smb: client: fix UAF in async decryption")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The NULL array terminator at the end of erratum_1386_microcode was
removed during the switch from x86_cpu_desc to x86_cpu_id. This
causes readers to run off the end of the array.
Replace the NULL.
Fixes: f3f325152673 ("x86/cpu: Move AMD erratum 1386 table over to 'x86_cpu_id'")
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
|
|
- The MSB 32 bits of `z_fragmentoff` are available only in extent
records of size >= 8B.
- Use round_down() to calculate `lstart` as well as increase `pos`
correspondingly for extent records of size == 8B.
Fixes: 1d191b4ca51d ("erofs: implement encoded extent metadata")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250408114448.4040220-2-hsiangkao@linux.alibaba.com
|
|
I'm unsure why they aren't 2 bytes in size only in arm-linux-gnueabi.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202504051202.DS7QIknJ-lkp@intel.com
Fixes: 61ba89b57905 ("erofs: add 48-bit block addressing on-disk support")
Fixes: efb2aef569b3 ("erofs: add encoded extent on-disk definition")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250408114448.4040220-1-hsiangkao@linux.alibaba.com
|
|
If a file-backed IO fails before submitting the bio to the lower
filesystem, an error is returned, but the bio->bi_status is not
marked as an error. However, the error information should be passed
to the end_io handler. Otherwise, the IO request will be treated as
successful.
Fixes: 283213718f5d ("erofs: support compressed inodes for fileio")
Signed-off-by: Sheng Yong <shengyong1@xiaomi.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250408122351.2104507-1-shengyong1@xiaomi.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Don't fetch it again if we already have it. It seems the
registers don't reliably have the value at resume in some
cases.
Fixes: 785f0f9fe742 ("drm/amdgpu: Add mes v12_0 ip block support (v4)")
Reviewed-by: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9e7b08d239c2f21e8f417854f81e5ff40edbebff)
Cc: stable@vger.kernel.org # 6.12.x
|
