summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-05-24MAINTAINERS: Add entries for CBS, ETF and taprio qdiscsVinicius Costa Gomes1-0/+8
Add Vinicius Costa Gomes as maintainer for these qdiscs. These qdiscs are all TSN (Time Sensitive Networking) related. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24Linux 5.13-rc3v5.13-rc3Linus Torvalds1-1/+1
2021-05-23media: imx: imx7_mipi_csis: Update MAINTAINERSLaurent Pinchart1-0/+1
Given my recent contributions to the imx7-mipi-csis driver, I can as well be listed as a maintainer. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: imx: imx7_mipi_csis: Add i.MX8MM supportLaurent Pinchart1-10/+49
The CSI-2 receiver in the i.MX8MM is a newer version of the one found in the i.MX7. Differences are minimal, support it in the imx7_mipi_csis driver. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: dt-bindings: media: nxp,imx7-mipi-csi2: Add i.MX8MM supportLaurent Pinchart1-14/+95
The i.MX8MM integrates a newer version of the CSIS CSI-2 receiver as the i.MX7 family. Differences in integration are are: - An additional clock is required - Up to 4 data lanes are supported - No reset or PHY supply is present Support it in the DT binding. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: imx: imx7_mipi_csis: Move PHY control to dedicated functionsLaurent Pinchart1-26/+38
Move the PHY regulator and reset handling to dedicated functions. This groups all related code together, and prepares for i.MX8 support that doesn't require control of the PHY regulator and reset. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: imx: imx7_mipi_csis: Reject invalid data-lanes settingsLaurent Pinchart1-0/+9
The CSIS doesn't support data lanes reordering. Reject invalid settings. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: imx: imx7_mipi_csis: Reorganize mipi_csis_probe()Laurent Pinchart1-11/+19
Group the operations performed in mipi_csis_probe() logically to improve readability. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: imx: imx7_mipi_csis: Reorganize csi_state structureLaurent Pinchart1-21/+14
Group the fiels of the csi_state structure logically to improve readability. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: imx: imx7_mipi_csis: Make csi_state num_clocks field unsignedLaurent Pinchart1-1/+1
The num_clocks field of the csi_state only stores positive values, make it unsigned. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: imx: imx7_mipi_csis: Drop csi_state pdev fieldLaurent Pinchart1-17/+13
The pdev field of the csi_state structure is only used to access the device pointer, which is stored in a separate field. Drop the pdev field, as well as a few local dev variables. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: imx: imx7_mipi_csis: Pass csi_state to mipi_csis_subdev_init()Laurent Pinchart1-8/+5
Pass the csi_state pointer to the mipi_csis_subdev_init() function, instead of miscellaneous information scattered in different arguments. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: imx: imx7_mipi_csis: Don't pass pdev to mipi_csis_parse_dt()Laurent Pinchart1-5/+4
The mipi_csis_parse_dt() function is called with a pointer to the csi_state, which contains all the information necessary. Don't pass the platform device pointer as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: imx: imx7_mipi_csis: Turn csi_state irq field into local variableLaurent Pinchart1-6/+6
The irq field of the csi_state structure is only used in mipi_csis_probe(). Turn it into a local variable. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: imx: imx7_mipi_csis: Rename csi_state flag field to stateLaurent Pinchart1-13/+13
The flag field of the csi_state structure contains the device state. Rename it accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: imx: imx7_mipi_csis: Rename mipi_sd to sdLaurent Pinchart1-46/+45
The CSIS is modelled as a single subdev, there's thus no ambiguity regarding which subdev the code refers to. Rename mipi_sd to sd. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: imx: imx7_mipi_csis: Drop csi_state phy fieldLaurent Pinchart1-1/+0
The phy field of the csi_state structure is unused. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: imx: imx7_mipi_csis: Store CSI-2 data type in format structureLaurent Pinchart1-29/+42
Replace the register value stored in the csis_pix_format structure with the CSI-2 data type. The register value is simply computed from the data type using a shift. This prepares for i.MX8MP support that needs the same data type in a different hardware register. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: imx: imx7_mipi_csis: Drop unused csis_hw_reset structureLaurent Pinchart1-7/+0
The csis_hw_reset structure is instantiated as a member of csi_state, but that member is never used. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: imx: imx7_mipi_csis: Set the CLKSETTLE register fieldLaurent Pinchart1-4/+10
Set the CLKSETTLE field explicitly, with a value hardcoded to 0. This brings no functional change, but prepares for calculation of the CLKSETTLE value. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: imx: imx7_mipi_csis: Reorganize code in sectionsLaurent Pinchart1-252/+279
Improve readability by reorganizing the code in sections. No functional change intended. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: imx: imx7_mipi_csis: Don't set subdev dataLaurent Pinchart1-2/+0
The driver doesn't need to store subdev data, as the subdev is embedded in csi_state and is thus accessed using container_of. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: imx: imx7_mipi_csis: Minimize locking in get/set formatLaurent Pinchart1-16/+20
Reduce the code sections that are run with the lock held in the get/set format handlers: - mipi_csis_get_format() retrieves a pointer to the format, and thus doesn't need locking as long as the arguments passed to the function don't require locking either. - sdformat is a structure passed by the caller, not an internal state, and thus doesn't require locking. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: imx: imx7_mipi_csis: Move static data to top of mipi_csis_dump_regs()Laurent Pinchart1-3/+4
It's customary to declare static variables at the top of the function, with a blank line separating them from the non-static variables. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: imx: imx7_mipi_csis: Update ISP_CONFIG macros for quad pixel modeLaurent Pinchart1-1/+3
The i.MX8MM expands the DOUBLE_CMPNT bit in the ISP_CONFIG register into a two bits field that support quad pixel mode in addition to the single and double modes. Update the ISP_CONFIG register macros to support this. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: imx: imx7_mipi_csis: Count the CSI-2 debug interruptsLaurent Pinchart1-18/+51
In addition to the main interrupts that flag errors and other events, the CSI-2 receiver has debug interrupt sources that flag various events useful for debugging. Add those sources to the event counter mechanism and print them when debugging is enabled. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: imx: imx7_mipi_csis: Fix logging of only error event countersLaurent Pinchart1-2/+4
The mipi_csis_events array ends with 6 non-error events, not 4. Update mipi_csis_log_counters() accordingly. While at it, log event counters in forward order, as there's no reason to log them backward. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: uapi: move MPEG-2 stateless controls out of stagingEzequiel Garcia14-369/+367
Until now, the MPEG-2 V4L2 API was not exported as a public API, and only defined in a private media header (media/mpeg2-ctrls.h). After reviewing the MPEG-2 specification in detail, and reworking the controls so they match the MPEG-2 semantics properly, we can consider it ready. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Tested-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Daniel Almeida <daniel.almeida@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: controls: Log MPEG-2 stateless control in .std_logEzequiel Garcia1-0/+9
Simply print the type of the control. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Tested-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Daniel Almeida <daniel.almeida@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: uapi: Move the MPEG-2 stateless control type out of stagingEzequiel Garcia2-4/+4
Move the MPEG-2 stateless control types out of staging, and re-number it to avoid any confusion. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Tested-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Daniel Almeida <daniel.almeida@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: uapi: mpeg2: Remove V4L2_CID_MPEG_VIDEO_MPEG2_SLICE_PARAMSEzequiel Garcia14-111/+7
The Hantro and Cedrus drivers work in frame-mode, meaning they expect all the slices in a picture (either frame or field structure) to be passed in each OUTPUT buffer. These two are the only V4L2 MPEG-2 stateless decoders currently supported. Given the VA-API drivers also work per-frame, coalescing all the MPEG-2 slices in a buffer before the decoding operation, it makes sense to not expect slice-mode drivers and therefore remove V4L2_CID_MPEG_VIDEO_MPEG2_SLICE_PARAMS. This is done to avoid carrying an unused interface. If needed, this control can be added without breaking backwards compatibility. Note that this would mean introducing a enumerator control to specify the decoding mode (see V4L2_CID_STATELESS_H264_DECODE_MODE). Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Co-developed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Tested-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Daniel Almeida <daniel.almeida@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: hantro/cedrus: Remove unneeded slice size and slice offsetEzequiel Garcia3-8/+7
The MPEG2_SLICE_PARAMS control is designed to refer to a single slice. However, the Hantro and Cedrus drivers operate in per-frame mode, and so does the current Ffmpeg and GStreamer implementations that are tested with these two drivers. In other words, the drivers are expecting all the slices in a picture (with either frame or field structure) to be contained in the OUTPUT buffer, which means the slice size and offset shouldn't be used. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Tested-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Daniel Almeida <daniel.almeida@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: uapi: mpeg2: Move reference buffer fieldsEzequiel Garcia5-32/+28
The forward and backwards references are specified per-picture and not per-slice. Move it to V4L2_CID_MPEG_VIDEO_MPEG2_PICTURE. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Tested-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Daniel Almeida <daniel.almeida@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: uapi: mpeg2: Split sequence and picture parametersEzequiel Garcia14-75/+237
Typically, bitstreams are composed of a sequence header, followed by a number of picture header and picture coding extension headers. Each picture can be composed of a number of slices. Let's split the MPEG-2 uAPI to follow these semantics more closely, allowing more usage flexibility. Having these controls split up allows applications to set a sequence control at the beginning of a sequence, and then set a picture control for each frame. While here add padding fields where needed, and document the uAPI header thoroughly. Note that the V4L2_CTRL_TYPE_{} defines had to be moved because it clashes with existing ones. This is not really an issue since they will be re-defined when the controls are moved out of staging. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Tested-by: Jonas Karlman <jonas@kwiboo.se> Tested-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Daniel Almeida <daniel.almeida@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: uapi: mpeg2: Cleanup flagsEzequiel Garcia6-142/+175
Our current MPEG-2 uAPI uses 1-byte fields for MPEG-2 boolean syntax elements. Clean these by adding a 'flags' field and flag macro for each boolean syntax element. A follow-up change will refactor this uAPI so we don't need to add padding fields just yet. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Tested-by: Jonas Karlman <jonas@kwiboo.se> Tested-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Daniel Almeida <daniel.almeida@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: uapi: mpeg2: rework quantisation matrices semanticsEzequiel Garcia4-58/+28
As stated in the MPEG-2 specification, section 6.3.7 "Quant matrix extension": Each quantisation matrix has a default set of values. When a sequence_header_code is decoded all matrices shall be reset to their default values. User defined matrices may be downloaded and this can occur in a sequence_header() or in a quant_matrix_extension(). The load_intra_quantiser_matrix syntax elements are transmitted in the bitstream headers, signalling that a quantisation matrix needs to be loaded and used for pictures transmitted afterwards (until the matrices are reset). This "load" semantics are implemented in the V4L2 interface without the need of any "load" flags: passing the control is effectively a load. Therefore, rework the V4L2_CID_MPEG_VIDEO_MPEG2_QUANTISATION semantics to match the MPEG-2 semantics. Quantisation matrices values are now initialized by the V4L2 control core to their reset default value, and applications are expected to reset their values as specified. The quantisation control is therefore optional, and used to load bitstream-defined values in the quantisation matrices. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Co-developed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Tested-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Daniel Almeida <daniel.almeida@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: uapi: mpeg2: Rename "quantization" to "quantisation"Ezequiel Garcia16-63/+58
The MPEG-2 specification refers to the quantisation matrices using the word "quantisation". Make the V4L2 interface more ergonomic by matching the MPEG-2 spec. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Tested-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Daniel Almeida <daniel.almeida@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: dvb-usb: fix wrong definitionPavel Skripkin1-1/+1
syzbot reported WARNING in vmalloc. The problem was in zero size passed to vmalloc. The root case was in wrong cxusb_bluebird_lgz201_properties definition. adapter array has only 1 entry, but num_adapters was 2. Call Trace: __vmalloc_node mm/vmalloc.c:2963 [inline] vmalloc+0x67/0x80 mm/vmalloc.c:2996 dvb_dmx_init+0xe4/0xb90 drivers/media/dvb-core/dvb_demux.c:1251 dvb_usb_adapter_dvb_init+0x564/0x860 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:184 dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:86 [inline] dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:184 [inline] dvb_usb_device_init.cold+0xc94/0x146e drivers/media/usb/dvb-usb/dvb-usb-init.c:308 cxusb_probe+0x159/0x5e0 drivers/media/usb/dvb-usb/cxusb.c:1634 Fixes: 4d43e13f723e ("V4L/DVB (4643): Multi-input patch for DVB-USB device") Cc: stable@vger.kernel.org Reported-by: syzbot+7336195c02c1bd2f64e1@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: lmedm04: delete lme2510_get_adapter_count()Dan Carpenter1-8/+1
The adapter count is fixed at compile time so we can delete the lme2510_get_adapter_count() function and set ".num_adapters = 1" instead. There is also no need to create a zeroed adapter element at the end of the array. Remove that as well. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23media: rc: i2c: Fix an error messageChristophe JAILLET1-2/+2
'ret' is known to be 1 here. In fact 'i' is expected instead. Store the return value of 'i2c_master_recv()' in 'ret' so that the error message print the correct error code. Fixes: acaa34bf06e9 ("media: rc: implement zilog transmitter") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-23Merge tag 'perf-urgent-2021-05-23' of ↵Linus Torvalds4-9/+31
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "Two perf fixes: - Do not check the LBR_TOS MSR when setting up unrelated LBR MSRs as this can cause malfunction when TOS is not supported - Allocate the LBR XSAVE buffers along with the DS buffers upfront because allocating them when adding an event can deadlock" * tag 'perf-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/lbr: Remove cpuc->lbr_xsave allocation from atomic context perf/x86: Avoid touching LBR_TOS MSR for Arch LBR
2021-05-23Merge tag 'locking-urgent-2021-05-23' of ↵Linus Torvalds5-13/+19
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "Two locking fixes: - Invoke the lockdep tracepoints in the correct place so the ordering is correct again - Don't leave the mutex WAITER bit stale when the last waiter is dropping out early due to a signal as that forces all subsequent lock operations needlessly into the slowpath until it's cleaned up again" * tag 'locking-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/mutex: clear MUTEX_FLAGS if wait_list is empty due to signal locking/lockdep: Correct calling tracepoints
2021-05-23Merge tag 'irq-urgent-2021-05-23' of ↵Linus Torvalds5-11/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A few fixes for irqchip drivers: - Allocate interrupt descriptors correctly on Mainstone PXA when SPARSE_IRQ is enabled; otherwise the interrupt association fails - Make the APPLE AIC chip driver depend on APPLE - Remove redundant error output on devm_ioremap_resource() failure" * tag 'irq-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: Remove redundant error printing irqchip/apple-aic: APPLE_AIC should depend on ARCH_APPLE ARM: PXA: Fix cplds irqdesc allocation when using legacy mode
2021-05-23Merge tag 'x86_urgent_for_v5.13_rc3' of ↵Linus Torvalds3-57/+92
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Fix how SEV handles MMIO accesses by forwarding potential page faults instead of killing the machine and by using the accessors with the exact functionality needed when accessing memory. - Fix a confusion with Clang LTO compiler switches passed to the it - Handle the case gracefully when VMGEXIT has been executed in userspace * tag 'x86_urgent_for_v5.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sev-es: Use __put_user()/__get_user() for data accesses x86/sev-es: Forward page-faults which happen during emulation x86/sev-es: Don't return NULL from sev_es_get_ghcb() x86/build: Fix location of '-plugin-opt=' flags x86/sev-es: Invalidate the GHCB after completing VMGEXIT x86/sev-es: Move sev_es_put_ghcb() in prep for follow on patch
2021-05-23Merge tag 'powerpc-5.13-4' of ↵Linus Torvalds5-46/+82
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix breakage of strace (and other ptracers etc.) when using the new scv ABI (Power9 or later with glibc >= 2.33). - Fix early_ioremap() on 64-bit, which broke booting on some machines. Thanks to Dmitry V. Levin, Nicholas Piggin, Alexey Kardashevskiy, and Christophe Leroy. * tag 'powerpc-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s/syscall: Fix ptrace syscall info with scv syscalls powerpc/64s/syscall: Use pt_regs.trap to distinguish syscall ABI difference between sc and scv syscalls powerpc: Fix early setup to make early_ioremap() work
2021-05-23ALSA: usb-audio: scarlett2: snd_scarlett_gen2_controls_create() can be statickernel test robot1-2/+2
sound/usb/mixer_scarlett_gen2.c:2000:5: warning: symbol 'snd_scarlett_gen2_controls_create' was not declared. Should it be static? Fixes: 265d1a90e4fb ("ALSA: usb-audio: scarlett2: Improve driver startup messages") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20210522180900.GA83915@f59a3af2f1d9 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-05-23Merge tag 'kbuild-fixes-v5.13' of ↵Linus Torvalds4-28/+32
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix short log indentation for tools builds - Fix dummy-tools to adjust to the latest stackprotector check * tag 'kbuild-fixes-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: dummy-tools: adjust to stricter stackprotector check scripts/jobserver-exec: Fix a typo ("envirnoment") tools build: Fix quiet cmd indentation
2021-05-23riscv: kexec: Fix W=1 build warningsJisheng Zhang2-7/+8
Fixes the following W=1 build warning(s): In file included from include/linux/kexec.h:28, from arch/riscv/kernel/machine_kexec.c:7: arch/riscv/include/asm/kexec.h:45:1: warning: ‘extern’ is not at beginning of declaration [-Wold-style-declaration] 45 | const extern unsigned char riscv_kexec_relocate[]; | ^~~~~ arch/riscv/include/asm/kexec.h:46:1: warning: ‘extern’ is not at beginning of declaration [-Wold-style-declaration] 46 | const extern unsigned int riscv_kexec_relocate_size; | ^~~~~ arch/riscv/kernel/machine_kexec.c:125:6: warning: no previous prototype for ‘machine_shutdown’ [-Wmissing-prototypes] 125 | void machine_shutdown(void) | ^~~~~~~~~~~~~~~~ arch/riscv/kernel/machine_kexec.c:147:1: warning: no previous prototype for ‘machine_crash_shutdown’ [-Wmissing-prototypes] 147 | machine_crash_shutdown(struct pt_regs *regs) | ^~~~~~~~~~~~~~~~~~~~~~ arch/riscv/kernel/machine_kexec.c:23: warning: Function parameter or member 'image' not described in 'kexec_image_info' arch/riscv/kernel/machine_kexec.c:53: warning: Function parameter or member 'image' not described in 'machine_kexec_prepare' arch/riscv/kernel/machine_kexec.c:114: warning: Function parameter or member 'image' not described in 'machine_kexec_cleanup' arch/riscv/kernel/machine_kexec.c:148: warning: Function parameter or member 'regs' not described in 'machine_crash_shutdown' arch/riscv/kernel/machine_kexec.c:167: warning: Function parameter or member 'image' not described in 'machine_kexec' Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-05-23riscv: kprobes: Fix build error when MMU=nJisheng Zhang1-0/+2
lkp reported a randconfig failure: arch/riscv/kernel/probes/kprobes.c:90:22: error: use of undeclared identifier 'PAGE_KERNEL_READ_EXEC' We implemented the alloc_insn_page() to allocate PAGE_KERNEL_READ_EXEC page for kprobes insn page for STRICT_MODULE_RWX. But if MMU=n, we should fall back to the generic weak alloc_insn_page() by generic kprobe subsystem. Fixes: cdd1b2bd358f ("riscv: kprobes: Implement alloc_insn_page()") Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-05-23riscv: Select ARCH_USE_MEMTESTKefeng Wang1-0/+1
As of commit dce44566192e ("mm/memtest: add ARCH_USE_MEMTEST"), architectures must select ARCH_USE_MEMTESET to enable CONFIG_MEMTEST. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Fixes: f6e5aedf470b ("riscv: Add support for memtest") Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 22:21:07 +0300