summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-07-21ionic: fix up filter locks and debug msgsShannon Nelson2-10/+12
Add in a couple of forgotten spinlocks and fix up some of the debug messages around filter management. Fixes: c1e329ebec8d ("ionic: Add management of rx filters") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21ionic: use offset for ethtool regs dataShannon Nelson1-2/+5
Use an offset to write the second half of the regs data into the second half of the buffer instead of overwriting the first half. Fixes: 4d03e00a2140 ("ionic: Add initial ethtool support") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21net: hsr: check for return value of skb_put_padto()Murali Karicheri1-6/+11
skb_put_padto() can fail. So check for return type and return NULL for skb. Caller checks for skb and acts correctly if it is NULL. Fixes: 6d6148bc78d2 ("net: hsr: fix incorrect lsdu size in the tag of HSR frames for small frames") Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21Documentation: bareudp: update iproute2 sample commandsGuillaume Nault1-6/+13
bareudp.rst was written before iproute2 gained support for this new type of tunnel. Therefore, the sample command lines didn't match the final iproute2 implementation. Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21mlxsw: destroy workqueue when trap_register in mlxsw_emad_initLiu Jian1-1/+2
When mlxsw_core_trap_register fails in mlxsw_emad_init, destroy_workqueue() shouled be called to destroy mlxsw_core->emad_wq. Fixes: d965465b60ba ("mlxsw: core: Fix possible deadlock") Signed-off-by: Liu Jian <liujian56@huawei.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21dpaa_eth: Fix one possible memleak in dpaa_eth_probeLiu Jian1-1/+1
When dma_coerce_mask_and_coherent() fails, the alloced netdev need to be freed. Fixes: 060ad66f9795 ("dpaa_eth: change DMA device") Signed-off-by: Liu Jian <liujian56@huawei.com> Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21Merge branch 'smc-fixes'David S. Miller2-3/+7
Karsten Graul says: ==================== net/smc: fixes 2020-07-20 Please apply the following patch series for smc to netdev's net tree. Patch 1 fixes a problem with a buffer that is not put back when the connection was killed in the meantime. Patch 2 fixes a wrong behaviour when the maximum dmb buffer count exceeded. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21net/smc: fix dmb buffer shortageKarsten Graul1-2/+2
There is a current limit of 1920 registered dmb buffers per ISM device for smc-d. One link group can contain 255 connections, each connection is using one dmb buffer. When the connection is closed then the registered buffer is held in a queue and is reused by the next connection. When a link group is 'full' then another link group is created and uses an own buffer pool. The link groups are added to a list using list_add() which puts a new link group to the first position in the list. In the situation that many connections are opened (>1920) and a few of them stay open while others are closed quickly we end up with at least 8 link groups. For a new connection a matching link group is looked up, iterating over the list of link groups. The trailing 7 link groups all have registered dmb buffers which could be reused, while the first link group has only a few dmb buffers and then hit the 1920 limit. Because the first link group is not full (255 connection limit not reached) it is chosen and finally the connection falls back to TCP because there is no dmb buffer available in this link group. There are multiple ways to fix that: using list_add_tail() allows to scan older link groups first for free buffers which ensures that buffers are reused first. This fixes the problem for smc-r link groups as well. For smc-d there is an even better way to address this problem because smc-d does not have the 255 connections per link group limit. So fix the problem for smc-d by allowing large link groups. Fixes: c6ba7c9ba43d ("net/smc: add base infrastructure for SMC-D and ISM") Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21net/smc: put slot when connection is killedKarsten Graul1-1/+5
To get a send slot smc_wr_tx_get_free_slot() is called, which might wait for a free slot. When smc_wr_tx_get_free_slot() returns there is a check if the connection was killed in the meantime. In that case don't only return an error, but also put back the free slot. Fixes: b290098092e4 ("net/smc: cancel send and receive for terminated socket") Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21rxrpc: Fix sendmsg() returning EPIPE due to recvmsg() returning ENODATADavid Howells2-2/+2
rxrpc_sendmsg() returns EPIPE if there's an outstanding error, such as if rxrpc_recvmsg() indicating ENODATA if there's nothing for it to read. Change rxrpc_recvmsg() to return EAGAIN instead if there's nothing to read as this particular error doesn't get stored in ->sk_err by the networking core. Also change rxrpc_sendmsg() so that it doesn't fail with delayed receive errors (there's no way for it to report which call, if any, the error was caused by). Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21Merge tag 'ieee802154-for-davem-2020-07-20' of ↵David S. Miller1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== pull-request: ieee802154 for net 2020-07-20 An update from ieee802154 for your *net* tree. A potential memory leak fix for adf7242 from Liu Jian, and one more HTTPS link change from Alexander A. Klimov. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21net: bcmgenet: add missed clk_disable_unprepare in bcmgenet_probeZhang Changzhong1-2/+2
The driver forgets to call clk_disable_unprepare() in error path after a success calling for clk_prepare_enable(). Fix to goto err_clk_disable if clk_prepare_enable() is successful. Fixes: c80d36ff63a5 ("net: bcmgenet: Use devm_clk_get_optional() to get the clocks") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21net: bcmgenet: fix error returns in bcmgenet_probe()Zhang Changzhong1-1/+1
The driver forgets to call clk_disable_unprepare() in error path after a success calling for clk_prepare_enable(). Fix to goto err_clk_disable if clk_prepare_enable() is successful. Fixes: 99d55638d4b0 ("net: bcmgenet: enable NETIF_F_HIGHDMA flag") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20Merge tag 'vfio-v5.8-rc7' of git://github.com/awilliam/linux-vfio into masterLinus Torvalds1-0/+5
Pull VFIO fix from Alex Williamson: "Fix race with eventfd ctx cleared outside of mutex (Zeng Tao)" * tag 'vfio-v5.8-rc7' of git://github.com/awilliam/linux-vfio: vfio/pci: fix racy on error and request eventfd ctx
2020-07-20ath10k: Fix NULL pointer dereference in AHB device probeHauke Mehrtens2-42/+38
This fixes a NULL pointer dereference in the probe path for AHB devices. There attr parameter in the ath10k_ce_alloc_pipe() function is not initialized, but accessed. This function is called by ath10k_pci_setup_resource() which is called by ath10k_ahb_probe(). The struct ath10k_pci is also used for AHB devices and not only for PCI devices. The initialization of the new members of struct ath10k_pci is moved to ath10k_pci_setup_resource() which is used by the PCI and the AHB code. This also fixes a use after free bug in ath10k_pci_remove() when ar_pci is accessed after ath10k_core_destroy() was called, which calls ieee80211_free_hw() and frees this memory. This fixes the following bug seen with backports-5.8-rc2 on OpenWrt on a IPQ4019 device: [ 11.117462] 8<--- cut here --- [ 11.117494] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 11.119510] pgd = f377fd58 [ 11.127657] [00000000] *pgd=8e9a0835, *pte=00000000, *ppte=00000000 [ 11.130206] Internal error: Oops: 17 [#1] SMP ARM [ 11.136339] Modules linked in: ath10k_pci(+) ath10k_core ath xt_state xt_nat xt_conntrack xt_REDIRECT xt_MASQUERADE xt_FLOWOFFLOAD pppox ppp_generic nf_nat nf_flow_table_hw nf_flow_table nf_conntrack_rtcache nf_conntrack mac80211 ipt_REJECT cfg80211 xt_time xt_tcpudp xt_multiport xt_mark xt_mac xt_limit xt_comment xt_TCPMSS xt_LOG slhc nf_reject_ipv4 nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle iptable_filter ip_tables crc_ccitt compat nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_qcom gpio_button_hotplug [ 11.174355] CPU: 2 PID: 257 Comm: kmodloader Not tainted 5.4.51 #0 [ 11.196585] Hardware name: Generic DT based system [ 11.202746] PC is at ath10k_ce_alloc_pipe+0x58/0x180 [ath10k_core] [ 11.207459] LR is at ath10k_pci_alloc_pipes+0x94/0xc8 [ath10k_pci] [ 11.213600] pc : [<bf2c96cc>] lr : [<bf2fbf98>] psr: 80000013 [ 11.219760] sp : cea0dc90 ip : cf4001f0 fp : 00000001 [ 11.225923] r10: 00000000 r9 : 00000018 r8 : ce4963b4 [ 11.231133] r7 : 00000000 r6 : ce491ea0 r5 : 00000000 r4 : ce4963b4 [ 11.236342] r3 : 0004a000 r2 : 0004a000 r1 : bf2d0d70 r0 : 00000006 [ 11.242942] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 11.249452] Control: 10c5387d Table: 8e9c006a DAC: 00000051 [ 11.256656] Process kmodloader (pid: 257, stack limit = 0xaba286ca) [ 11.262386] Stack: (0xcea0dc90 to 0xcea0e000) [ 11.268462] dc80: 00000000 ce49629c ce491ea0 ce4963bc [ 11.272984] dca0: ce495ea0 bf2fbf98 00000002 ce4963a8 ce495ea0 00000000 ce491ea0 cf95d800 [ 11.281142] dcc0: cf95d810 cf95d810 00000001 bf2fc854 00000000 cf95d800 bf300748 ce495ea0 [ 11.289304] dce0: ce491ea0 d1300000 cf95d800 bf2fde8c 00000000 00000001 ce49cea0 00000000 [ 11.297462] dd00: 00000000 00000000 bf3010a0 cf95d810 bf3010a0 c0b61580 00000000 00000000 [ 11.305624] dd20: bf3010a0 0000000b c0b04e48 c06110c8 c0b61588 cf95d810 c0b61580 c060f740 [ 11.313781] dd40: cf95d810 00000000 bf3010a0 00000000 00000000 ce49d2a4 bf301100 c060fc90 [ 11.321943] dd60: 00000000 bf3010a0 cf95d810 c060fcf0 cf95d810 bf3010a0 c060fc98 c060dca4 [ 11.330101] dd80: cf809d58 cf952cb4 bf3010a0 ce967900 c0b1f2c8 c060ec28 bf3007b8 bf301038 [ 11.338263] dda0: bf3010a0 bf3010a0 c0b2d4d4 ffffe000 bf304000 c0610278 c0b04e48 c0b2d4d4 [ 11.346422] ddc0: ffffe000 bf2fe2b4 c0b04e48 bf30403c c0b04e48 c0302764 8040003f 00000001 [ 11.354582] dde0: 38e38e39 ce513580 c0b2cb50 cf801e00 cffbc6ac ce513600 cf801e00 cffbc6ac [ 11.362740] de00: 8040003e ce49d280 00000001 c0428d54 00000001 cf801e00 cffbc6ac ce513580 [ 11.370900] de20: ce49d280 0e391998 bf301100 ce49d340 d12d2000 ce49d280 00000001 c0398c2c [ 11.379061] de40: 00000001 cea0df34 cea0df34 00000001 d12d2000 c039ae48 bf30110c 00007fff [ 11.387221] de60: bf301100 c0398044 cf804028 bf301148 c0397674 bf30126c c08ee5c0 c08ee70c [ 11.395380] de80: bf30110c c0b04e48 c08ee518 00000000 c08ee570 c0b04e48 ce513600 fffff000 [ 11.403540] dea0: 00000001 ce513580 0000000d 0000000d 00000000 00000000 00000000 00000000 [ 11.411698] dec0: 00000000 00000000 6e72656b 00006c65 00000000 00000000 00000000 00000000 [ 11.419858] dee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 11.428018] df00: 00000000 0e391998 00000000 0000c610 d12de610 00000000 0062c620 ffffe000 [ 11.436180] df20: 000129d1 00000051 00000000 c039b228 00000000 d12d7afd d12d8e80 d12d2000 [ 11.444337] df40: 0000c610 d12de0e8 d12ddfa8 d12dab74 00009000 00009570 00003a2c 00009cae [ 11.452498] df60: 00000000 00000000 00000000 00003a1c 0000001e 0000001f 00000018 00000000 [ 11.460656] df80: 00000010 00000000 00000000 00000000 00000003 00000080 c0301204 cea0c000 [ 11.468817] dfa0: 00000080 c0301000 00000000 00000000 00620010 0000c610 000129d1 00000014 [ 11.476975] dfc0: 00000000 00000000 00000003 00000080 0000c610 00000000 b6fc1d20 00000000 [ 11.485137] dfe0: bef0ad14 bef0acf8 00011e14 b6f74c94 60000010 00620010 00000000 00000000 [ 11.493390] [<bf2c96cc>] (ath10k_ce_alloc_pipe [ath10k_core]) from [<bf2fbf98>] (ath10k_pci_alloc_pipes+0x94/0xc8 [ath10k_pci]) [ 11.501498] [<bf2fbf98>] (ath10k_pci_alloc_pipes [ath10k_pci]) from [<bf2fc854>] (ath10k_pci_setup_resource+0xb8/0xf0 [ath10k_pci]) [ 11.512773] [<bf2fc854>] (ath10k_pci_setup_resource [ath10k_pci]) from [<bf2fde8c>] (ath10k_ahb_probe+0x32c/0x670 [ath10k_pci]) [ 11.524566] [<bf2fde8c>] (ath10k_ahb_probe [ath10k_pci]) from [<c06110c8>] (platform_drv_probe+0x34/0x70) [ 11.536016] [<c06110c8>] (platform_drv_probe) from [<c060f740>] (really_probe+0x1f0/0x358) [ 11.545729] [<c060f740>] (really_probe) from [<c060fc90>] (device_driver_attach+0x58/0x60) [ 11.553886] [<c060fc90>] (device_driver_attach) from [<c060fcf0>] (__driver_attach+0x58/0xcc) [ 11.562134] [<c060fcf0>] (__driver_attach) from [<c060dca4>] (bus_for_each_dev+0x68/0x8c) [ 11.570731] [<c060dca4>] (bus_for_each_dev) from [<c060ec28>] (bus_add_driver+0x1c8/0x1d8) [ 11.578886] [<c060ec28>] (bus_add_driver) from [<c0610278>] (driver_register+0x74/0x108) [ 11.587060] [<c0610278>] (driver_register) from [<bf2fe2b4>] (ath10k_ahb_init+0x18/0x38 [ath10k_pci]) [ 11.595320] [<bf2fe2b4>] (ath10k_ahb_init [ath10k_pci]) from [<bf30403c>] (init_module+0x3c/0x1000 [ath10k_pci]) [ 11.604432] [<bf30403c>] (init_module [ath10k_pci]) from [<c0302764>] (do_one_initcall+0x84/0x1d8) [ 11.614657] [<c0302764>] (do_one_initcall) from [<c0398c2c>] (do_init_module+0x5c/0x228) [ 11.623421] [<c0398c2c>] (do_init_module) from [<c039ae48>] (load_module+0x1fc8/0x224c) [ 11.631663] [<c039ae48>] (load_module) from [<c039b228>] (sys_init_module+0x15c/0x17c) [ 11.639390] [<c039b228>] (sys_init_module) from [<c0301000>] (ret_fast_syscall+0x0/0x54) [ 11.647370] Exception stack(0xcea0dfa8 to 0xcea0dff0) [ 11.655615] dfa0: 00000000 00000000 00620010 0000c610 000129d1 00000014 [ 11.660569] dfc0: 00000000 00000000 00000003 00000080 0000c610 00000000 b6fc1d20 00000000 [ 11.668725] dfe0: bef0ad14 bef0acf8 00011e14 b6f74c94 [ 11.676886] Code: e1c321d4 e0433002 e0232397 e5843014 (e5953000) [ 11.681958] ---[ end trace 8f35917de2e76854 ]--- Fixes: 521fc37be3d8 ("ath10k: Avoid override CE5 configuration for QCA99X0 chipsets") Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [ipq40xx/ map-ac2200] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200714205802.17688-1-hauke@hauke-m.de
2020-07-20iwlwifi: Make some Killer Wireless-AC 1550 cards work againAlessio Bonfiglio1-0/+2
Fix the regression introduced by commit c8685937d07f ("iwlwifi: move pu devices to new table") by adding the ids and the configurations of two missing Killer 1550 cards in order to configure and let them work correctly again (following the new table convention). Resolve bug 208141 ("Wireless ac 9560 not working kernel 5.7.2", https://bugzilla.kernel.org/show_bug.cgi?id=208141). Fixes: c8685937d07f ("iwlwifi: move pu devices to new table") Signed-off-by: Alessio Bonfiglio <alessio.bonfiglio@mail.polimi.it> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200714091911.4442-1-alessio.bonfiglio@mail.polimi.it
2020-07-20ath9k: Fix regression with Atheros 9271Mark O'Donovan1-1/+3
This fix allows ath9k_htc modules to connect to WLAN once again. Fixes: 2bbcaaee1fcb ("ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb") Link: https://bugzilla.kernel.org/show_bug.cgi?id=208251 Signed-off-by: Mark O'Donovan <shiftee@posteo.net> Reported-by: Roman Mamedov <rm@romanrm.net> Tested-by: Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200711043324.8079-1-shiftee@posteo.net
2020-07-20drm/imx: imx-tve: Delete an error message in imx_tve_bind()Markus Elfring1-3/+1
The function “platform_get_irq” can log an error already. Thus omit a redundant message for the exception handling in the calling function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-07-20gpu: ipu-v3: image-convert: Wait for all EOFs before completing a tileSteve Longerbeam1-27/+82
Use a bit-mask of EOF irqs to determine when all required idmac channel EOFs have been received for a tile conversion, and only do tile completion processing after all EOFs have been received. Otherwise it was found that a conversion would stall after the completion of a tile and the start of the next tile, because the input/read idmac channel had not completed and entered idle state, thus locking up the channel when attempting to re-start it for the next tile. Fixes: 0537db801bb01 ("gpu: ipu-v3: image-convert: reconfigure IC per tile") Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-07-20gpu: ipu-v3: image-convert: Combine rotate/no-rotate irq handlersSteve Longerbeam1-38/+20
Combine the rotate_irq() and norotate_irq() handlers into a single eof_irq() handler. Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-07-20gpu: ipu-v3: Restore RGB32, BGR32Steve Longerbeam1-0/+2
RGB32 and BGR32 formats were inadvertently removed from the switch statement in ipu_pixelformat_to_colorspace(). Restore them. Fixes: a59957172b0c ("gpu: ipu-v3: enable remaining 32-bit RGB V4L2 pixel formats") Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-07-20drm/imx: imx-ldb: Disable both channels for split mode in enc->disable()Liu Ying1-3/+4
Both of the two LVDS channels should be disabled for split mode in the encoder's ->disable() callback, because they are enabled in the encoder's ->enable() callback. Fixes: 6556f7f82b9c ("drm: imx: Move imx-drm driver out of staging") Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: <stable@vger.kernel.org> Signed-off-by: Liu Ying <victor.liu@nxp.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-07-20drm/imx: parallel-display: move panel/bridge detection to fail earlyMarco Felsch1-6/+6
We do some string parsing and string comparison in front of drm_of_find_panel_or_bridge(). All this work is useless if the call fails. Move drm_of_find_panel_or_bridge() infront of the parsing work to fail early. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-07-20drm/imx: imx-ldb: remove useless enumMarco Felsch1-5/+0
Since commit 5e501ed7253b ("drm/imx: imx-ldb: allow to determine bus format from the connected panel") the enum isn't used anymore. Drop it to cleanup the code a bit. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-07-20drm/imx: drop useless best_encoder callbackMarco Felsch3-27/+0
The best_encoder() callback is used by the drm-core to find an encoder if the connector is connected to multiple encoders but the parallel, tve and ldb uses always the 1-encoder : 1-connector setup. Such a simple setup can be handled by the drm-core. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-07-20drm/imx: tve: fix regulator_disable error pathMarco Felsch1-10/+10
Add missing regulator_disable() as devm_action to avoid dedicated unbind() callback and fix the missing error handling. Fixes: fcbc51e54d2a ("staging: drm/imx: Add support for Television Encoder (TVEv2)") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-07-20drm/imx: parallel-display: Adjust bus_flags handlingMarek Vasut1-1/+1
The bus_flags handling logic does not seem to cover all potential usecases. Specifically, this seems to fail with an "edt,etm0700g0edh6" display attached to an 24bit display interface, with interface-pix-fmt = "rgb24" set in DT. This patch fixes the problem by overriding the imx_crtc_state->bus_flags from the imxpd->bus_flags only if the DT property "interface-pix-fmt" is present or if the DI provides no formats. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-07-20drm/imx: fix use after freePhilipp Zabel6-32/+52
Component driver structures allocated with devm_kmalloc() in bind() are freed automatically after unbind(). Since the contained drm structures are accessed afterwards in drm_mode_config_cleanup(), move the allocation into probe() to extend the driver structure's lifetime to the lifetime of the device. This should eventually be changed to use drm resource managed allocations with lifetime of the drm device. We also need to ensure that all componets are available during the unbind() so we need to call component_unbind_all() before we free non-devres resources like planes. Note this patch fixes the the use after free bug but introduces a possible boot loop issue. The issue is triggered if the HDMI support is enabled and a component driver always return -EPROBE_DEFER, see discussion [1] for more details. [1] https://lkml.org/lkml/2020/3/24/1467 Fixes: 17b5001b5143 ("imx-drm: convert to componentised device support") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> [m.felsch@pengutronix: fix imx_tve_probe()] [m.felsch@pengutronix: resort component_unbind_all()) [m.felsch@pengutronix: adapt commit message] Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-07-20video: fbdev: Replace HTTP links with HTTPS onesAlexander A. Klimov14-19/+19
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200719203714.61745-1-grandmaster@al2klimov.de
2020-07-20drm: Replace HTTP links with HTTPS onesAlexander A. Klimov3-6/+6
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200719171428.60470-1-grandmaster@al2klimov.de
2020-07-20zonefs: count pages after truncating the iteratorJohannes Thumshirn1-4/+4
Count pages after possibly truncating the iterator to the maximum zone append size, not before. Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
2020-07-20drm/mxsfb: drop unused function parameterUwe Kleine-König1-2/+2
flags is unused since the driver was introduced in commit 45d59d704080 ("drm: Add new driver for MXSFB controller"). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Stefan Agner <stefan@agner.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200716174139.16602-1-u.kleine-koenig@pengutronix.de
2020-07-20zonefs: Fix compilation warningDamien Le Moal1-3/+7
Avoid the compilation warning "Variable 'ret' is reassigned a value before the old one has been used." in zonefs_create_zgroup() by setting ret for the error path only if an error happens. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
2020-07-20drm/mxsfb: Make supported modifiers explicitGuido Günther1-2/+7
In contrast to other display controllers on imx like DCSS and ipuv3 lcdif/mxsfb does not support detiling e.g. vivante tiled layouts. Since mesa might assume otherwise make it explicit that only DRM_FORMAT_MOD_LINEAR is supported. Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Stefan Agner <stefan@agner.ch> Link: https://patchwork.freedesktop.org/patch/msgid/26877532e272c12a74c33188e2a72abafc9a2e1c.1584973664.git.agx@sigxcpu.org
2020-07-20staging: comedi: addi_apci_1564: check INSN_CONFIG_DIGITAL_TRIG shiftIan Abbott1-6/+14
The `INSN_CONFIG` comedi instruction with sub-instruction code `INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is used as a right shift amount for other bitmask values without being checked. Shift amounts greater than or equal to 32 will result in undefined behavior. Add code to deal with this. Fixes: 1e15687ea472 ("staging: comedi: addi_apci_1564: add Change-of-State interrupt subdevice and required functions") Cc: <stable@vger.kernel.org> #3.17+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20200717145257.112660-4-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-20staging: comedi: addi_apci_1500: check INSN_CONFIG_DIGITAL_TRIG shiftIan Abbott1-5/+19
The `INSN_CONFIG` comedi instruction with sub-instruction code `INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is used as a right shift amount for other bitmask values without being checked. Shift amounts greater than or equal to 32 will result in undefined behavior. Add code to deal with this, adjusting the checks for invalid channels so that enabled channel bits that would have been lost by shifting are also checked for validity. Only channels 0 to 15 are valid. Fixes: a8c66b684efaf ("staging: comedi: addi_apci_1500: rewrite the subdevice support functions") Cc: <stable@vger.kernel.org> #4.0+: ef75e14a6c93: staging: comedi: verify array index is correct before using it Cc: <stable@vger.kernel.org> #4.0+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20200717145257.112660-5-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-20staging: comedi: addi_apci_1032: check INSN_CONFIG_DIGITAL_TRIG shiftIan Abbott1-6/+14
The `INSN_CONFIG` comedi instruction with sub-instruction code `INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is used as a right shift amount for other bitmask values without being checked. Shift amounts greater than or equal to 32 will result in undefined behavior. Add code to deal with this. Fixes: 33cdce6293dcc ("staging: comedi: addi_apci_1032: conform to new INSN_CONFIG_DIGITAL_TRIG") Cc: <stable@vger.kernel.org> #3.8+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20200717145257.112660-3-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-20staging: comedi: ni_6527: fix INSN_CONFIG_DIGITAL_TRIG supportIan Abbott1-1/+1
`ni6527_intr_insn_config()` processes `INSN_CONFIG` comedi instructions for the "interrupt" subdevice. When `data[0]` is `INSN_CONFIG_DIGITAL_TRIG` it is configuring the digital trigger. When `data[2]` is `COMEDI_DIGITAL_TRIG_ENABLE_EDGES` it is configuring rising and falling edge detection for the digital trigger, using a base channel number (or shift amount) in `data[3]`, a rising edge bitmask in `data[4]` and falling edge bitmask in `data[5]`. If the base channel number (shift amount) is greater than or equal to the number of channels (24) of the digital input subdevice, there are no changes to the rising and falling edges, so the mask of channels to be changed can be set to 0, otherwise the mask of channels to be changed, and the rising and falling edge bitmasks are shifted by the base channel number before calling `ni6527_set_edge_detection()` to change the appropriate registers. Unfortunately, the code is comparing the base channel (shift amount) to the interrupt subdevice's number of channels (1) instead of the digital input subdevice's number of channels (24). Fix it by comparing to 32 because all shift amounts for an `unsigned int` must be less than that and everything from bit 24 upwards is ignored by `ni6527_set_edge_detection()` anyway. Fixes: 110f9e687c1a8 ("staging: comedi: ni_6527: support INSN_CONFIG_DIGITAL_TRIG") Cc: <stable@vger.kernel.org> # 3.17+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20200717145257.112660-2-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-20Merge tag 'misc-habanalabs-fixes-2020-07-19' of ↵Greg Kroah-Hartman1-3/+11
git://people.freedesktop.org/~gabbayo/linux into char-misc-linus Oded writes: This tag contains a single bug fix for 5.8-rc7: - Check that an index is in valid range before using it to access an array. The index is received from the user. This is to prevent a possible out-of-bounds access error. * tag 'misc-habanalabs-fixes-2020-07-19' of git://people.freedesktop.org/~gabbayo/linux: habanalabs: prevent possible out-of-bounds array access
2020-07-20Merge tag 'fpga-late-fixes-for-5.8' of ↵Greg Kroah-Hartman2-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-linus Moritz writes: FPGA manager fixes for 5.8 Here are two (late) dfl fixes for the the 5.8 release. Matthew's fix addresses an issue in the reset of a port. Xu'x fix addresses a linter warning. All patches have been reviewed on the mailing list, and have been in the last few linux-next releases (as part of my fixes branch) without issues. Signed-off-by: Moritz Fischer <mdf@kernel.org> * tag 'fpga-late-fixes-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga: fpga: dfl: fix bug in port reset handshake fpga: dfl: pci: reduce the scope of variable 'ret'
2020-07-20drm: core: Convert device logging to drm_* functions.Suraj Upadhyay3-10/+7
Convert device logging with dev_* functions into drm_* functions. The patch has been generated with the coccinelle script below. The script focuses on instances of dev_* functions where the drm device context is clearly visible in its arguments. @@expression E1; expression list E2; @@ -dev_warn(E1->dev, E2) +drm_warn(E1, E2) @@expression E1; expression list E2; @@ -dev_info(E1->dev, E2) +drm_info(E1, E2) @@expression E1; expression list E2; @@ -dev_err(E1->dev, E2) +drm_err(E1, E2) @@expression E1; expression list E2; @@ -dev_info_once(E1->dev, E2) +drm_info_once(E1, E2) @@expression E1; expression list E2; @@ -dev_notice_once(E1->dev, E2) +drm_notice_once(E1, E2) @@expression E1; expression list E2; @@ -dev_warn_once(E1->dev, E2) +drm_warn_once(E1, E2) @@expression E1; expression list E2; @@ -dev_err_once(E1->dev, E2) +drm_err_once(E1, E2) @@expression E1; expression list E2; @@ -dev_err_ratelimited(E1->dev, E2) +drm_err_ratelimited(E1, E2) @@expression E1; expression list E2; @@ -dev_dbg(E1->dev, E2) +drm_dbg(E1, E2) Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200718150955.GA23103@blackclown
2020-07-20drm/i810: switch from 'pci_' to 'dma_' APIChristophe JAILLET1-5/+5
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'i810_dma_initialize()' GFP_KERNEL can be used because its only caller, 'i810_dma_init()', already use it and no lock is taken in the between. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200718072822.339064-1-christophe.jaillet@wanadoo.fr
2020-07-20Merge tag 'drm-misc-next-2020-07-16' of ↵Dave Airlie186-3814/+3864
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.9: UAPI Changes: Cross-subsystem Changes: - Add ckoenig as dma-buf maintainer. - Revert invalid fix for dma-fence-chain, and fix selftest. - Add fixmes to amifb about APUS support. - Use array3_size in fbcon_prepare_logo, and struct_size() in alloc_apertures. - Fix leaks in neofb, fb/savage and omapfb. - Other small fixes to fb code. - Convert some dt bindings to schema for some panels, and fix simple-framebuffer dt example. Core Changes: - Add DRM_FORMAT_MOD_GENERIC_16_16_TILE as alias to DRM_FORMAT_MOD_SAMSUNG_16_16_TILE, as it can be used more generic. - Add support for multiple DispID extension blocks in edid. - Use https instead of http for some of the urls. - Use drm_* macros for logging in mipi-dsi and fb-helper. - Further cleanup ttm_mem_reg handling. - Remove duplicated words in comments. Driver Changes: - Use __drm_atomic_helper_crtc_reset in all atomic drivers. - Add Amlogic Video FBC support to meson and fourcc to core. - Refactor hisilicon's hibmc_drv_vdac. - Create a TXP CRTC for vc4. - Rework cursor support in ast. - Fix runtime PM in STM. - Allow bigger cursors in vkms. - Cleanup sg handling in radeon and amdgpu, and stop creating dummy gtt nodes with ttm fixed. - Rework crtc handling in mgag200. - Miscellaneous small fixes to meson, vgem, bridge/dw-hdmi, panel/auo,b116xw03, panel/LG LB070WV8, lima, bridge/sil_sii8620, virtio, tilcdc. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/8b360d65-f228-9286-d247-3004156a5254@linux.intel.com
2020-07-20drm/ast: Use managed MM initializationThomas Zimmermann3-13/+12
Cleaning up ast's MM code with ast_mm_fini() resets the write-combine flags on the VRAM I/O memory. Drop ast_mm_fini() in favor of an auto- release callback. Releasing the device also executes the callback. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200716125353.31512-7-tzimmermann@suse.de
2020-07-20drm/ast: Initialize DRAM type before posting GPUThomas Zimmermann1-3/+3
Posting the GPU requires the correct DRAM type to be stored in struct ast_private. Therefore first initialize the DRAM info and then post the GPU. This restores the original order of instructions in this function. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Fixes: bad09da6deab ("drm/ast: Fixed vram size incorrect issue on POWER") Cc: Joel Stanley <joel@jms.id.au> Cc: Y.C. Chen <yc_chen@aspeedtech.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: "Y.C. Chen" <yc_chen@aspeedtech.com> Cc: <stable@vger.kernel.org> # v4.11+ Link: https://patchwork.freedesktop.org/patch/msgid/20200716125353.31512-6-tzimmermann@suse.de
2020-07-20drm/ast: Move VRAM size detection to ast_mm.cThomas Zimmermann3-38/+46
VRAM size detection is only relevant to the memory management. Move the code into ast_mm.c. While at it, rename the function to ast_get_vram_size(). The function argument's type is now struct ast_private. The result is stored in a local variable and not in struct ast_private any longer. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200716125353.31512-5-tzimmermann@suse.de
2020-07-20drm/ast: Use managed VRAM-helper initializationThomas Zimmermann1-8/+3
As a first step to managed MM code in ast, switch over VRAM MM helpers. v2: * updated to use drmm_vram_helper_init() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200716125353.31512-4-tzimmermann@suse.de
2020-07-20drm/ast: Rename ast_ttm.c to ast_mm.cThomas Zimmermann2-1/+1
Although built upon TTM, the ast driver's VRAM MM helper does not expose TTM to its users. Rename the related ast file to ast_mm.c. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200716125353.31512-3-tzimmermann@suse.de
2020-07-20drm/vram-helper: Managed vram helpersThomas Zimmermann2-36/+51
Calling drmm_vram_helper_init() sets up a managed instance of VRAM MM. Releasing the DRM device also frees the memory manager. The patch also updates the DRM documentation for VRAM helpers. The tutorial now describes the new managed interface. The old interfaces are deprecated and should not be used in new code. v2: * rename init function to drmm_vram_helper_init() * return errno code from init function; caller does not need vram_mm anyway * update documentation and remove docs for deprecated un-managed functions Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200716125353.31512-2-tzimmermann@suse.de
2020-07-20net: ieee802154: adf7242: Replace HTTP links with HTTPS onesAlexander A. Klimov1-1/+1
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200719113142.58304-1-grandmaster@al2klimov.de Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 13:32:30 +0300