| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Update some maintainers email addresses
- Fix handling of elfcorehdr reservation for crash dump kernel
- Fix unittest expected warnings text
* tag 'devicetree-fixes-for-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: update Roger Quadros email
MAINTAINERS: sifive: drop Yash Shah
of/fdt: move elfcorehdr reservation early for crash dump kernel
of: unittest: update text of expected warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"A second small SELinux fix which addresses an incorrect
mutex_is_locked() check"
* tag 'selinux-pr-20220223' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix misuse of mutex_is_locked()
|
|
The VF min and max rate were passed incorrectly and resulted in wrongly
interchanging them. Fix the order of parameters in
mlx5_esw_qos_set_vport_rate().
Fixes: d7df09f5e7b4 ("net/mlx5: E-switch, Enable vport QoS on demand")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add mistakenly missing increment of count variable when looping over
output buffer in mlx5e_self_test().
This resolves the issue of garbage values output when querying with self
test via ethtool.
before:
$ ethtool -t eth2
The test result is PASS
The test extra info:
Link Test 0
Speed Test 1768697188
Health Test 758528120
Loopback Test 3288687
after:
$ ethtool -t eth2
The test result is PASS
The test extra info:
Link Test 0
Speed Test 0
Health Test 0
Loopback Test 0
Fixes: 7990b1b5e8bd ("net/mlx5e: loopback test is not supported in switchdev mode")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently offload of rule on bareudp device require tunnel key
in order to match on mpls fields and without it the mpls fields
are ignored, this is incorrect due to the fact udp tunnel doesn't
have key to match on.
Fix by returning error in case flow is matching on tunnel key.
Fixes: 72046a91d134 ("net/mlx5e: Allow to match on mpls parameters")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently the MPLSoUDP encap builds the MPLS header using encap action
information (tunnel id, ttl and tos) instead of the MPLS action
information (label, ttl, tc and bos) which is wrong.
Fix by storing the MPLS action information during the flow action
parse and later using it to create the encap MPLS header.
Fixes: f828ca6a2fb6 ("net/mlx5e: Add support for hw encapsulation of MPLS over UDP")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Fec counters support is checked via the PCAM feature_cap_mask,
bit 0: PPCNT_counter_group_Phy_statistical_counter_group.
Add feature check to avoid faulty behavior.
Fixes: 0a1498ebfa55 ("net/mlx5e: Expose FEC counters via ethtool")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Offload of ct clear action is just resetting the reg_c register.
It's done by allocating modify hdr resources which is limited.
Doing it multiple times is redundant and wasting modify hdr resources
and if resources depleted the driver will fail offloading the rule.
Ignore redundant ct clear actions after the first one.
Fixes: 806401c20a0f ("net/mlx5e: CT, Fix multiple allocations and memleak of mod acts")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Such rules are redundant but allowed and passed to the driver.
The driver does not support offloading such rules so return an error.
Fixes: 03a9d11e6eeb ("net/mlx5e: Add TC drop and mirred/redirect action parsing for SRIOV offloads")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
This kind of action is not supported by firmware and generates a
syndrome.
kernel: mlx5_core 0000:08:00.0: mlx5_cmd_check:777:(pid 102063): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x8708c3)
Fixes: d7e75a325cb2 ("net/mlx5e: Add offloading of E-Switch TC pedit (header re-write) actions")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
For RX TLS device-offloaded packets, the HW spec guarantees checksum
validation for the offloaded packets, but does not define whether the
CQE.checksum field matches the original packet (ciphertext) or
the decrypted one (plaintext). This latitude allows architetctural
improvements between generations of chips, resulting in different decisions
regarding the value type of CQE.checksum.
Hence, for these packets, the device driver should not make use of this CQE
field. Here we block CHECKSUM_COMPLETE usage for RX TLS device-offloaded
packets, and use CHECKSUM_UNNECESSARY instead.
Value of the packet's tcp_hdr.csum is not modified by the HW, and it always
matches the original ciphertext.
Fixes: 1182f3659357 ("net/mlx5e: kTLS, Add kTLS RX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The ioctl EEPROM query wrongly returns success on read failures, fix
that by returning the appropriate error code.
Fixes: bb64143eee8c ("net/mlx5e: Add ethtool support for dump module EEPROM")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add missing call to up_write_ref_node() which releases the semaphore
in case the FTE doesn't have destinations, such in drop rule case.
Fixes: 465e7baab6d9 ("net/mlx5: Fix deletion of duplicate rules")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Only prio 1 is supported if firmware doesn't support ignore flow
level for nic mode. The offending commit removed the check wrongly.
Add it back.
Fixes: 9a99c8f1253a ("net/mlx5e: E-Switch, Offload all chain 0 priorities when modify header and forward action is not supported")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Match metadata support check returns false for ecpf device.
However, this support does exist for ecpf and therefore this
limitation should be removed to allow feature such as stacked
devices and internal port offloaded to be supported.
Fixes: 92ab1eb392c6 ("net/mlx5: E-Switch, Enable vport metadata matching if firmware supports it")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently, log_max_qp value is dependent on what FW reports as its max capability.
In reality, due to a bug, some FWs report a value greater than 17, even though they
don't support log_max_qp > 17.
This FW issue led the driver to exhaust memory on startup.
Thus, log_max_qp value is set to be no more than 17 regardless
of what FW reports, as it was before the cited commit.
Fixes: f79a609ea6bf ("net/mlx5: Update log_max_qp value to FW max capability")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When deciding whether to start syncing and actually free all the "hot"
ICM chunks, we need to consider the type of the ICM chunks that we're
dealing with. For instance, the amount of available ICM for MODIFY_ACTION
is significantly lower than the usual STE ICM, so the threshold should
account for that - otherwise we can deplete MODIFY_ACTION memory just by
creating and deleting the same modify header action in a continuous loop.
This patch replaces the hard-coded threshold with a dynamic value.
Fixes: 1c58651412bb ("net/mlx5: DR, ICM memory pools sync optimization")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently SMFS allows adding rule with matching on src/dst IP w/o matching
on full ethertype or ip_version, which is not supported by HW.
This patch fixes this issue and adds the check as it is done in DMFS.
Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When adding a rule with 32 destinations, we hit the following out-of-band
access issue:
BUG: KASAN: slab-out-of-bounds in mlx5_cmd_dr_create_fte+0x18ee/0x1e70
This patch fixes the issue by both increasing the allocated buffers to
accommodate for the needed actions and by checking the number of actions
to prevent this issue when a rule with too many actions is provided.
Fixes: 1ffd498901c1 ("net/mlx5: DR, Increase supported num of actions to 32")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
During rule insertion on each ICM memory chunk we also allocate shadow memory
used for management. This includes the hw_ste, dr_ste and miss list per entry.
Since the scale of these allocations is large we noticed a performance hiccup
that happens once malloc and free are stressed.
In extreme usecases when ~1M chunks are freed at once, it might take up to 40
seconds to complete this, up to the point the kernel sees this as self-detected
stall on CPU:
rcu: INFO: rcu_sched self-detected stall on CPU
To resolve this we will increase the reuse of shadow memory.
Doing this we see that a time in the aforementioned usecase dropped from ~40
seconds to ~8-10 seconds.
Fixes: 29cf8febd185 ("net/mlx5: DR, ICM pool memory allocator")
Signed-off-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add the upcoming BlueField-4 and ConnectX-8 device IDs.
Fixes: 2e9d3e83ab82 ("net/mlx5: Update the list of the PCI supported devices")
Signed-off-by: Meir Lichtinger <meirl@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In case devlink reload action fw_activate failed in sync reset stage,
use the new MFRL field reset_state to find why it failed and share this
clarification with the user.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add new field reset_state to MFRL register. This field expose current
state of sync reset for fw update. This field enables sharing with the
user more details on why fw activate failed in case it failed the sync
reset stage.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
DEVX can now use mlx5_cmd_do() which will not intercept the command
execution status and will provide full information of the return code.
DEVX can now propagate the error code safely to upper layers, to
indicate to the callers if the command was actually executed and the
error code indicates the command execution status availability in
the command outbox buffer.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Same as the new mlx5_cmd_do API, report all information to callers and
let them handle the error values and outbox parsing.
The user callback status "work->user_callback(status)" is now similar to
the error rc code returned from the blocking mlx5_cmd_do() version,
and now is defined as follows:
-EREMOTEIO : Command executed by FW, outbox.status != MLX5_CMD_STAT_OK.
Caller must check FW outbox status.
0 : Command execution successful, outbox.status == MLX5_CMD_STAT_OK.
< 0 : Command couldn't execute, FW or driver induced error.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
mlx5_core_create_{cq/dct} functions are non-trivial mlx5 commands
functions. They check command execution status themselves and hide
valuable FW failure information.
For mlx5_core/eth kernel user this is what we actually want, but for a
devx/rdma user the hidden information is essential and should be propagated
up to the caller, thus we convert these commands to use mlx5_cmd_do
to return the FW/driver and command outbox status as is, and let the caller
decide what to do with it.
For kernel callers of mlx5_core_create_{cq/dct} or those who only care about
the binary status (FAIL/SUCCESS) they must check status themselves via
mlx5_cmd_check() to restore the current behavior.
err = mlx5_create_cq(in, out)
err = mlx5_cmd_check(err, in, out)
if (err)
// handle err
For DEVX users and those who care about full visibility, They will just
propagate the error to user space, and app can check if err == -EREMOTEIO,
then outbox.{status,syndrome} are valid.
API Note:
mlx5_cmd_check() must be used by kernel users since it allows the driver
to intercept the command execution status and return a driver simulated
status in case of driver induced error handling or reset/recovery flows.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add mlx5_cmd_do. Unlike mlx5_cmd_exec, this function will not modify
or translate outbox.status.
The function will return:
return = 0: Command was executed, outbox.status == MLX5_CMD_STAT_OK.
return = -EREMOTEIO: Executed, outbox.status != MLX5_CMD_STAT_OK.
return < 0: Command execution couldn't be performed by FW or driver.
And document other mlx5_cmd_exec functions.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Do not mangle the command outbox in the internal low level cmd_exec and
cmd_invoke functions.
Instead return a proper unique error code and move the driver error
checking to be at a higher level in mlx5_cmd_exec().
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Make sure that the two basic command interface functions cmd_exec and
cmd_invoke will return well defined return values:
return < 0 : Command execution couldn't be submitted by driver
return > 0 : Command execution couldn't be performed by firmware
return = 0 : Command was executed by FW, Caller must check FW
outbox status.
These statuses are valid for the blocking call of cmd_exec() e.g. when
callback == NULL, in a downstream patch, will refactor the code to
provide the same return value semantics to the callback.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In active-backup mode the backup interface's packets are dropped by the
bond device. In switchdev where TC rules are offloaded to the FDB
this can lead to packets being hit in the FDB where without offload
they would have been dropped before reaching TC rules in the kernel.
Create a drop rule to make sure packets on inactive ports are dropped
before reaching the FDB.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
A bond device will drop duplicate packets (received on inactive ports)
by default. A flag (all_slaves_active) can be set to override such
behaviour. This flag is a global flag per bond device (ALB mode isn't
supported by mlx5 driver so it can be ignored)
When NETDEV_CHANGEUPPER / NETDEV_CHANGEINFODATA event is received check if
there is an interface that is inactive.
Downstream patch will use this information in order to decide if a drop
rule is needed.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Instead of using 1 & 2 as the ports numbers use an enum value.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Use the local variable for dev0 (and add from dev1) instead of using
the devices stored in the ldev structure. Makes the code easier
to read.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Support inserting an ingress ACL drop rule on the uplink in
switchdev mode. This will be used by downstream patches to offload
active-backup lag mode. The drop rule (if created) is the first rule
in the ACL.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
As both uplinks set the same metadata there is no need to merge
the ACL handling of both into a single one.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When in switchdev mode wire traffic will hit the FDB in one of two
scenarios.
- Shared FDB, in that case traffic from both physical ports should be
tagged by the same metadata value so a single FDB rule could catch
traffic from both ports.
- Two E-Switches, traffic from each physical port will hit the native
E-Switch which means traffic from one physical port can't reach the
E-Switch of the other one.
Looking at those two scenarios it means we can always use the same metadata
value to tag wire traffic regardless of the mode.
Reserve a single metadata value to be used to tag wire traffic.
Signed-off-by: Sunil Rani <sunrani@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
If the flow table isn't an autogroup the upper driver has to create the
flow groups explicitly. This information can't later be used when
creating rules to insert into a specific flow group. Allow such use case.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
mlx5 has some unused static inline helpers in include/
while at it also clean static inlines in the driver itself.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
This reverts commit d6ff94afd90b0ce8d1715f8ef77d4347d7a7f2c0.
Since commit faab39f63c1f ("net: allow out-of-order netdev unregistration")
fixed the issue in a better way, this patch is to revert the previous fix,
as it might bring back the old problem fixed by commit 563bcbae3ba2 ("net:
vlan: fix a UAF in vlan_dev_real_dev()").
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/563c0a6e48510ccbff9ef4715de37209695e9fc4.1645592097.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add leading space to spdx tag
Use // for spdx c file comment
Replacements
resereved to reserved
inbetween to in between
everytime to every time
intutivie to intuitive
currenct to current
encontered to encountered
referenceing to referencing
upto to up to
exectuted to executed
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220220184055.3608317-1-trix@redhat.com
|
|
The check in the last return statement is unnecessary, we can just return
the ret variable.
But we can simplify the function further by returning 0 immediately if we
find the section size and -ENOENT otherwise.
Thus we can also remove the ret variable.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220223085244.3058118-1-ytcoode@gmail.com
|
|
This commit fixes a compilation error on systems with glibc < 2.26 [0]:
```
In file included from main.h:14:0,
from gen.c:24:
linux/tools/include/tools/libc_compat.h:11:21: error: attempt to use poisoned "reallocarray"
static inline void *reallocarray(void *ptr, size_t nmemb, size_t size)
```
This happens because gen.c pulls <bpf/libbpf_internal.h>, and then
<tools/libc_compat.h> (through main.h). When
COMPAT_NEED_REALLOCARRAY is set, libc_compat.h defines reallocarray()
which libbpf_internal.h poisons with a GCC pragma.
This commit reuses libbpf_reallocarray() implemented in commit
029258d7b228 ("libbpf: Remove any use of reallocarray() in libbpf").
v1 -> v2:
- reuse libbpf_reallocarray() instead of reimplementing it
Fixes: a9caaba399f9 ("bpftool: Implement "gen min_core_btf" logic")
Reported-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220221125617.39610-1-mauricio@kinvolk.io
[0]: https://lore.kernel.org/bpf/3bf2bd49-9f2d-a2df-5536-bc0dde70a83b@isovalent.com/
|
|
Workstation application ANSA/META v21.1.4 get this error dmesg when
running CI test suite provided by ANSA/META:
[drm:amdgpu_gem_va_ioctl [amdgpu]] *ERROR* Couldn't update BO_VA (-16)
This is caused by:
1. create a 256MB buffer in invisible VRAM
2. CPU map the buffer and access it causes vm_fault and try to move
it to visible VRAM
3. force visible VRAM space and traverse all VRAM bos to check if
evicting this bo is valuable
4. when checking a VM bo (in invisible VRAM), amdgpu_vm_evictable()
will set amdgpu_vm->evicting, but latter due to not in visible
VRAM, won't really evict it so not add it to amdgpu_vm->evicted
5. before next CS to clear the amdgpu_vm->evicting, user VM ops
ioctl will pass amdgpu_vm_ready() (check amdgpu_vm->evicted)
but fail in amdgpu_vm_bo_update_mapping() (check
amdgpu_vm->evicting) and get this error log
This error won't affect functionality as next CS will finish the
waiting VM ops. But we'd better clear the error log by checking
the amdgpu_vm->evicting flag in amdgpu_vm_ready() to stop calling
amdgpu_vm_bo_update_mapping() later.
Another reason is amdgpu_vm->evicted list holds all BOs (both
user buffer and page table), but only page table BOs' eviction
prevent VM ops. amdgpu_vm->evicting flag is set only for page
table BOs, so we should use evicting flag instead of evicted list
in amdgpu_vm_ready().
The side effect of this change is: previously blocked VM op (user
buffer in "evicted" list but no page table in it) gets done
immediately.
v2: update commit comments.
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Qiang Yu <qiang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
vkms leverages common amdgpu framebuffer creation, and
also as it does not support FB modifier, there is no need
to check tiling flags when initing framebuffer when virtual
display is enabled.
This can fix below calltrace:
amdgpu 0000:00:08.0: GFX9+ requires FB check based on format modifier
WARNING: CPU: 0 PID: 1023 at drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:1150 amdgpu_display_framebuffer_init+0x8e7/0xb40 [amdgpu]
v2: check adev->enable_virtual_display instead as vkms can be
enabled in bare metal as well.
Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 4046afcebfc3c8c0dd5666c2671b2c192b344f78.
No need to support modifier in virtual kms, otherwise, in SRIOV
mode, when lanuching X server, set crtc will fail due to mismatch
between primary plane modifier and framebuffer modifier.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The GPU reset function of raven2 is not maintained or tested, so it should be
very unstable.
Now the amdgpu_asic_reset function is added to amdgpu_pmops_suspend, which
causes the S3 test of raven2 to fail, so the asic_reset of raven2 is ignored
here.
Fixes: daf8de0874ab5b ("drm/amdgpu: always reset the asic in suspend (v2)")
Signed-off-by: Chen Gong <curry.gong@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why]
Found when running igt@kms_atomic.
Userspace attempts to do a TEST_COMMIT when 0 streams which calls
dc_remove_stream_from_ctx. This in turn calls link_enc_unassign
which ends up modifying stream->link = NULL directly, causing the
global link_enc to be removed preventing further link activity
and future link validation from passing.
[How]
We take care of link_enc unassignment at the start of
link_enc_cfg_link_encs_assign so this call is no longer necessary.
Fixes global state from being modified while unlocked.
Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
commit 0064b0ce85bb ("drm/amd/pm: enable ASPM by default") enabled ASPM
by default but a variety of hardware configurations it turns out that this
caused a regression.
* PPC64LE hardware does not support ASPM at a hardware level.
CONFIG_PCIEASPM is often disabled on these architectures.
* Some dGPUs on ALD platforms don't work with ASPM enabled and PCIe subsystem
disables it
Check with the PCIe subsystem to see that ASPM has been enabled
or not.
Fixes: 0064b0ce85bb ("drm/amd/pm: enable ASPM by default")
Link: https://wiki.raptorcs.com/w/images/a/ad/P9_PHB_version1.0_27July2018_pub.pdf
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1723
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1739
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1885
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1907
Tested-by: koba.ko@canonical.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
We are racing the registering of .to_irq when probing the
i2c driver. This results in random failure of touchscreen
devices.
Following explains the race condition better.
[gpio driver] gpio driver registers gpio chip
[gpio consumer] gpio is acquired
[gpio consumer] gpiod_to_irq() fails with -ENXIO
[gpio driver] gpio driver registers irqchip
gpiod_to_irq works at this point, but -ENXIO is fatal
We could see the following errors in dmesg logs when gc->to_irq is NULL
[2.101857] i2c_hid i2c-FTS3528:00: HID over i2c has not been provided an Int IRQ
[2.101953] i2c_hid: probe of i2c-FTS3528:00 failed with error -22
To avoid this situation, defer probing until to_irq is registered.
Returning -EPROBE_DEFER would be the first step towards avoiding
the failure of devices due to the race in registration of .to_irq.
Final solution to this issue would be to avoid using gc irq members
until they are fully initialized.
This issue has been reported many times in past and people have been
using workarounds like changing the pinctrl_amd to built-in instead
of loading it as a module or by adding a softdep for pinctrl_amd into
the config file.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209413
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc unaligned handler fixes from Helge Deller:
"Two patches which fix a few bugs in the unalignment handlers.
The fldd and fstd instructions weren't handled at all on 32-bit
kernels, the stw instruction didn't check for fault errors and the
fldw_l and ldw_m were handled wrongly as integer vs floating point
instructions.
Both patches are tagged for stable series"
* tag 'for-5.17/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc/unaligned: Fix ldw() and stw() unalignment handlers
parisc/unaligned: Fix fldd and fstd unaligned handlers on 32-bit kernel
|
