summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-10-01mt76x2: disable WLAN core before probeFelix Fietkau2-0/+5
If the WLAN core is still active during initialization, it might cause the MCU or DMA to hang. This can happen during soft reboot, so disable the core + clock early to avoid this issue. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: add quirk to disable 2.4GHz band for Archer T1UStanislaw Gruszka3-1/+13
TP-LINK Archer T1U do not support 2.4GHz band despite EEPROM reports that. Add quirk to mask out 2.4GHz support. Reported-by: Sid Hayn <sidhayn@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: use skb_pad() instead of __skb_pad()Hauke Mehrtens1-1/+1
mt76 uses __skb_pad() with free_on_error set to true, this is the same as calling skb_pad(). This patch does not change any functionality, but it makes it easier to backport this driver in backports, because skb_pad() is also available in older kernel versions. Fixes: b40b15e1521f ("mt76: add usb support to mt76 layer") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: usb: make rx page_frag_cache access atomicLorenzo Bianconi4-7/+14
Add rx_page_lock spinlock in order to make rx page fragment access atomic. This patch fixes the following crash that occasionally occurs during module loading/unloading BUG: unable to handle kernel paging request at ffff9f8322e19000 PGD 27ba01067 P4D 27ba01067 PUD 27ddba063 PMD 263b35063 PTE 8000000262e19061 Oops: 0003 [#1] SMP PTI CPU: 2 PID: 1766 Comm: systemd-udevd Not tainted 4.19.0-rc5+ #6 Hardware name: ASUSTeK COMPUTER INC. ESC2000 G2/Z9PE-D8 WS, BIOS 0405 03/19/2012 RIP: 0010:__memcpy+0x12/0x20 RSP: 0018:ffffba13849b3ad8 EFLAGS: 00010246 RAX: ffff9f8322e17004 RBX: 00000000000038f0 RCX: 000000000000031f RDX: 0000000000000000 RSI: ffffba13844cf058 RDI: ffff9f8322e18ffc RBP: 0000000000010c6c R08: 0000000000000000 R09: 0000607ec0000000 R10: 0000000000000003 R11: 0000000000003e2e R12: ffff9f8324cd9540 R13: 0000000000000000 R14: ffffba13849b3b30 R15: ffff9f8322e17000 FS: 00007fadec85b880(0000) GS:ffff9f833fa80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff9f8322e19000 CR3: 0000000263428001 CR4: 00000000000606e0 Call Trace: mt76x02u_mcu_fw_send_data+0x16c/0x270 [mt76x02_usb] mt76x0u_probe+0x35a/0x598 [mt76x0u] usb_probe_interface+0x113/0x310 really_probe+0x1c8/0x400 driver_probe_device+0x5c/0x130 __driver_attach+0xec/0x110 bus_for_each_dev+0x50/0x90 bus_add_driver+0x1c0/0x280 driver_register+0x5b/0xe0 usb_register_driver+0x7c/0x140 do_one_initcall+0x44/0x19b do_init_module+0x5a/0x210 load_module+0x175c/0x1bc0 __do_sys_finit_module+0x97/0xc0 do_syscall_64+0x3f/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fadeb6f1809 RSP: 002b:00007ffe548f9f38 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 00007fadebdf0d89 RCX: 00007fadeb6f1809 RDX: 0000000000000000 RSI: 00007fadebdf0d89 RDI: 0000000000000006 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000006 R11: 0000000000000246 R12: 0000560b9ef58ab0 R13: 0000560b9ef29800 R14: 0000560b9ef59040 R15: 0000000000020000 Fixes: c12128ce44b0 ("mt76: use a per rx queue page fragment cache") Reported-by: Stanislaw Gruszka <sgruszka@redhat.com> Tested-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: report firmware version using ethtoolDavide Caratti5-0/+18
print fw_ver and build_ver members of struct mt76x02_fw_header, similarly to what appears in the output of 'dmesg' when the MCU firmware is loaded. Reported-by: Sid Hayn <sidhayn@gmail.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: include linux/module.h in files using MODULE_*Felix Fietkau5-0/+5
Fix source files using MODULE_* macros without including linux/module.h Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: phy: introduce mt76x0_phy_set_txpower routineLorenzo Bianconi3-7/+20
Add mt76x0_phy_set_txpower routine in order to configure base and per rate tx power gain. Moreover take into account txpower_conf in order to limit the tx power gain according to the bound provided by mac80211 Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: use shared debugfs implementationLorenzo Bianconi2-81/+1
Use mt76 shared debugfs implementation and remove duplicated code in mt76x0 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: remove eeprom dependency from mt76x0_get_power_infoLorenzo Bianconi5-81/+77
In order to unify eeprom parsing between mt76x0 and mt76x2 drivers, remove eeprom pointer dependency from mt76x0_get_power_info routine. Remove mt76x0_eeprom_params since it is now an empty structure Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: remove eeprom dependency from mt76x0_set_tx_power_per_rateLorenzo Bianconi5-111/+102
In order to unify eeprom parsing between mt76x0 and mt76x2 drivers, remove eeprom pointer dependency from mt76x0_set_tx_power_per_rate. Moreover use mt76_rate_power to store power vs rate calibration data. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: remove mt76x0_phy_set_tx_power and mt76x0_extra_power_over_macLorenzo Bianconi1-38/+0
Remove mt76x0_extra_power_over_mac and mt76x0_phy_set_tx_power routines since they are not actually used and tx power handling will be unified with mt76x2 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move mt76x02_rate_power_val in mt76x02-lib moduleLorenzo Bianconi2-41/+40
Move mt76x02_rate_power_val and mt76x2_sign_extend_optional utility routines in mt76x02_eeprom.h in order to reuse them in mt76x0 eeprom parsing Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move rate_txpower handler in mt76 debugfsLorenzo Bianconi2-10/+19
Move rate_txpower handler in mt76 debugfs in order to be reused in mt76x0 driver and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: add mt76x02_phy_set_txpower utility routineLorenzo Bianconi7-69/+133
Add mt76x02_phy_set_txpower utility routine in mt76x02_phy.c in order to be reused in mt76x0 tx power management code. Moreover move following routines in mt76x02-lib module: - mt76x02_tx_power_mask - mt76x02_get_max_rate_power - mt76x02_limit_rate_power - mt76x02_add_rate_power_offset Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move mt76_rate_power in mt76_devLorenzo Bianconi8-43/+44
Move mt76_rate_power data structure from mt76x2_dev to mt76_dev in order to share it with mt76x0 driver. Moreover move txpower_conf and txpower_cur in mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: fix return value of mt76x02_wait_for_macStanislaw Gruszka1-1/+1
We need to return bool value in mt76x02_wait_for_mac. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 2735a6dd7df3 ("mt76: unify wait_for_mac") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: usb: remove WARN_ON in mt76u_get_rx_entry_lenLorenzo Bianconi1-3/+3
Remove not useful WARN_ON macros in mt76u_get_rx_entry_len routine since corrupted frames should just be silently discarded Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move mt76x2_tssi_enabled in mt76x02_eeprom.hLorenzo Bianconi5-26/+26
Move mt76x2_tssi_enabled and mt76x02_temp_tx_alc_enabled in mt76x02_eeprom.h in order to be reused in mt76x0 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: unify parse hw capabilitiesLorenzo Bianconi1-25/+8
Unify parse hw capabilities with mt76x2 driver using mt76x02_eeprom_parse_hw_cap utility routine available in mt76x02-lib module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move mt76x02_eeprom_parse_hw_cap in mt76x02-lib moduleLorenzo Bianconi5-27/+27
Move mt76x02_eeprom_parse_hw_cap utility routine in mt76x02-lib module in order to be reused in mt76x0 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: unify freq offset parsingLorenzo Bianconi5-18/+22
Unify frequency offset parsing with mt76x2 driver using eeprom utility routines available in mt76x02-lib module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: unify temperature offset parsingLorenzo Bianconi5-10/+13
Unify temperature offset parsing with mt76x2 driver using eeprom utility routines available in mt76x02-lib module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: unify rssi_offset parsingLorenzo Bianconi4-49/+11
Unify rssi_offset parsing with mt76x2 driver using eeprom utility routines available in mt76x02-lib module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: unify lna_gain parsingLorenzo Bianconi5-40/+24
Unify lna gain parsing with mt76x2 driver using eeprom utility routines available in mt76x02-lib module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: add mt76x02_get_rx_gain and mt76x02_get_lna_gain utility routinesLorenzo Bianconi3-43/+63
Add mt76x02_get_rx_gain and mt76x02_get_lna_gain utility routines for rx gain parsing. mt76x02_get_rx_gain and mt76x02_get_lna_gain will be reused for eeprom parsing in mt76x0 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: remove mt76x0_set_country_reg routineLorenzo Bianconi3-42/+0
Remove mt76x0_set_country_reg routine for the moment since it is partial and it is not actually used Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move mt76x2_ext_pa_enabled routine in mt76x02_eeprom.cLorenzo Bianconi11-36/+33
Move mt76x2_ext_pa_enabled utility routine in mt76x02_eeprom.c and remove duplicated code. This is a preliminary patch to unify eeprom code between mt76x2 and mt76x0 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move mt76x2_get_efuse_data in mt76x02-lib moduleLorenzo Bianconi6-101/+95
Move mt76x2_efuse_read and mt76x2_get_efuse_data in mt76x02_eeprom.c in order to be reused in mt76x0 driver for eeprom parsing Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move mt76x02_mac_setaddr in mt76x02-lib moduleLorenzo Bianconi7-44/+23
Move mt76x02_mac_setaddr utility routine in mt76x02-lib module and remove duplicated code. This is a preliminary patch to unify eeprom code between mt76x2 and mt76x0 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move mt76x2_eeprom_get in mt76x02_eeprom.hLorenzo Bianconi9-60/+77
Move mt76x2_eeprom_get utility routine in mt76x02_eeprom.h since it will be used to parse mt76x0 eeprom in order to unify eeprom support between mt76x2 and mt76x0 drivers Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move eeprom utility routines in mt76x02_eeprom.hLorenzo Bianconi3-58/+38
Move shared eeprom utility routines in mt76x02_eeprom.h and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move common eeprom definitions in mt76x02-lib moduleLorenzo Bianconi5-160/+140
Move mt76x2 and mt76x0 common definitions in mt76x02_eeprom.h and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: add stbc entries to mt76_rate_powerFelix Fietkau4-6/+13
Add stbc tx power eeprom parsing support for mt76x2 driver. When writing power entries, make a distinction between rates that are read from the same EEPROM value, but have separate register entries. No effect on runtime behavior, but preparation for unification with mt76x0 and for placing restrictions on individual rate power limits Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move seq_put_array in mt76-core moduleLorenzo Bianconi3-21/+24
Move seq_put_array utility routine in mt76-core module in order to be reused in mt76x0 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: pci: add fw uploading routineLorenzo Bianconi5-13/+133
Add pci load firmware routine. Move some shared mcu definitions in mt76x02_mcu.h Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: pci: add mt7650 PCI IDLorenzo Bianconi1-0/+1
Add mt7650 PCI id found on ASUS rt-51ac to pci_device_id table Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x2: fix tx power configuration for VHT mcs 9Lorenzo Bianconi1-2/+2
Fix tx power configuration for VHT 1SS/STBC mcs 9 since in MT_TX_PWR_CFG_{8,9} mcs 8,9 bits are GENMASK(21,16) and GENMASK(29,24) while GENMASK(15,6) are marked as reserved Fixes: 7bc04215a66b ("mt76: add driver code for MT76x2e") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-20qtnfmac: remove set but not used variable 'vif'YueHaibing1-3/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/quantenna/qtnfmac/cfg80211.c: In function 'qtnf_dump_survey': drivers/net/wireless/quantenna/qtnfmac/cfg80211.c:694:19: warning: variable 'vif' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-20brcmsmac: Use kvmalloc() for ucode allocationsTakashi Iwai1-3/+3
The ucode chunk might be relatively large and the allocation with kmalloc() may fail occasionally. Since the data isn't DMA-transferred but by manual loops, we can use vmalloc instead of kmalloc. For a better performance, though, kvmalloc() would be the best choice in such a case, so let's replace with it. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1103431 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-20brcmfmac: remove set but not used variables 'sfdoff' and 'pad_size'YueHaibing1-4/+1
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c: In function 'brcmf_sdio_rxglom': drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:1466:11: warning: variable 'sfdoff' set but not used [-Wunused-but-set-variable] drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c: In function 'brcmf_sdio_bus_preinit': drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:3408:7: warning: variable 'pad_size' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-20brcm80211: remove redundant condition check before debugfs_remove_recursivezhong jiang1-2/+1
debugfs_remove_recursive has taken IS_ERR_OR_NULL into account. So just remove the condition check before debugfs_remove_recursive. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-20brcmfmac: increase buffer for obtaining firmware capabilitiesArend van Spriel1-1/+1
When obtaining the firmware capability a buffer is provided of 512 bytes. However, if all features in firmware are supported the buffer needs to be 565 bytes as otherwise truncated information is retrieved from firmware. Increasing the buffer to 768 bytes on stack. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-20brcmfmac: fix for proper support of 160MHz bandwidthArend van Spriel2-1/+35
Decoding of firmware channel information was not complete for 160MHz support. This resulted in the following warning: WARNING: CPU: 2 PID: 2222 at .../broadcom/brcm80211/brcmutil/d11.c:196 brcmu_d11ac_decchspec+0x2e/0x100 [brcmutil] Modules linked in: brcmfmac(O) brcmutil(O) sha256_generic cfg80211 ... CPU: 2 PID: 2222 Comm: kworker/2:0 Tainted: G O 4.17.0-wt-testing-x64-00002-gf1bed50 #1 Hardware name: Dell Inc. Latitude E6410/07XJP9, BIOS A07 02/15/2011 Workqueue: events request_firmware_work_func RIP: 0010:brcmu_d11ac_decchspec+0x2e/0x100 [brcmutil] RSP: 0018:ffffc90000047bd0 EFLAGS: 00010206 RAX: 000000000000e832 RBX: ffff8801146fe910 RCX: ffff8801146fd3c0 RDX: 0000000000002800 RSI: 0000000000000070 RDI: ffffc90000047c30 RBP: ffffc90000047bd0 R08: 0000000000000000 R09: ffffffffa0798c80 R10: ffff88012bca55e0 R11: ffff880110a4ea00 R12: ffff8801146f8000 R13: ffffc90000047c30 R14: ffff8801146fe930 R15: ffff8801138e02e0 FS: 0000000000000000(0000) GS:ffff88012bc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f18ce8b8070 CR3: 000000000200a003 CR4: 00000000000206e0 Call Trace: brcmf_setup_wiphybands+0x212/0x780 [brcmfmac] brcmf_cfg80211_attach+0xae2/0x11a0 [brcmfmac] brcmf_attach+0x1fc/0x4b0 [brcmfmac] ? __kmalloc+0x13c/0x1c0 brcmf_pcie_setup+0x99b/0xe00 [brcmfmac] brcmf_fw_request_done+0x16a/0x1f0 [brcmfmac] request_firmware_work_func+0x36/0x60 process_one_work+0x146/0x350 worker_thread+0x4a/0x3b0 kthread+0x102/0x140 ? process_one_work+0x350/0x350 ? kthread_bind+0x20/0x20 ret_from_fork+0x35/0x40 Code: 66 90 0f b7 07 55 48 89 e5 89 c2 88 47 02 88 47 03 66 81 e2 00 38 66 81 fa 00 18 74 6e 66 81 fa 00 20 74 39 66 81 fa 00 10 74 14 <0f> 0b 66 25 00 c0 74 20 66 3d 00 c0 75 20 c6 47 04 01 5d c3 66 ---[ end trace 550c46682415b26d ]--- brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 50 This patch adds the missing stuff to properly handle this. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-20Merge tag 'mt76-for-kvalo-2018-09-19' of https://github.com/nbd168/wirelessKalle Valo61-4374/+2759
mt76 patches for 4.20 * lots of mt76x0 cleanups / fixes * mt76x2u fixes * unify code between mt76x0, mt76x2e and mt76x2u * rename mt76x0 to mt76x0u * improve rx buffer allocation for all variants * prepare for adding mt76x0e (pci-e variant) support add CONFIG_MT76x0E kconfig symbol
2018-09-19mt76x0: usb: remove mt76_fw definitionLorenzo Bianconi1-38/+35
Remove mt76_fw dependency from mt76x0u_upload_firmware routine since it does not define firmware layout properly. Moreover use mt76_poll_msec utility routine to check if the fw is properly running Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-19mt76x0: remove unused usb header fileLorenzo Bianconi3-50/+4
Remove unused usb header file and move mt76x0 firmware definition in usb.c Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-19mt76x0: remove mcu source fileLorenzo Bianconi4-36/+2
Remove mcu.c source file since it contains just 'one-line' function that is shared between PCI and USB code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-19mt76x0: usb: move firmware loading to usb.cStanislaw Gruszka4-177/+171
Firmware loading is usb specific, move it to usb.c file. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-19mt76: use a per rx queue page fragment cacheFelix Fietkau3-8/+20
Using the NAPI or netdev frag cache along with other drivers can lead to 32 KiB pages being held for a long time, despite only being used for very few page fragments. This can happen if the driver grabs one or two fragments for rx ring refill, while other drivers use (and free up) the remaining fragments. The 32 KiB higher-order page can only be freed once all users have freed their fragments. Depending on the traffic patterns, this can waste a lot of memory and look a lot like a memory leak. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-19mt76x2: move mt76x2_phy_tssi_compensate in mt76x2-common moduleLorenzo Bianconi4-85/+46
Move mt76x2_phy_tssi_compensate routine in mt76x2-common module since it is shared between mt76x2 and mt76x2u drivers Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 21:58:49 +0300