| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Let's pass the queue index to netif_napi_add_config() to preserve
per-NAPI config.
Test:
Set 100 to defer-hard-irqs (default is 0) and check the value after
link down & up.
$ cat /sys/class/net/enp39s0/napi_defer_hard_irqs
0
$ ./tools/net/ynl/pyynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 2}'
[{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 65,
'ifindex': 2,
'irq': 29,
'irq-suspend-timeout': 0}]
$ sudo ./tools/net/ynl/pyynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--do napi-set --json='{"id": 65, "defer-hard-irqs": 100}'
$ sudo ip link set enp39s0 down && sudo ip link set enp39s0 up
Without patch:
$ ./tools/net/ynl/pyynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 2}'
[{'defer-hard-irqs': 0, <------------------- Reset to 0
'gro-flush-timeout': 0,
'id': 66, <------------------------------- New ID
'ifindex': 2,
'irq': 29,
'irq-suspend-timeout': 0}]
With patch:
$ ./tools/net/ynl/pyynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 2}'
[{'defer-hard-irqs': 100, <--------------+-- Preserved
'gro-flush-timeout': 0, |
'id': 65, <----------------------------'
'ifindex': 2,
'irq': 29,
'irq-suspend-timeout': 0}]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Arthur Kiyanovski <akiyano@amazon.com>
Link: https://patch.msgid.link/20250407164802.25184-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When validate_linkmsg() fails in do_setlink(), we jump to the errout
label and calls netdev_unlock_ops() even though we have not called
netdev_lock_ops() as reported by syzbot. [0]
Let's return an error directly in such a case.
[0]
WARNING: bad unlock balance detected!
6.14.0-syzkaller-12504-g8bc251e5d874 #0 Not tainted
syz-executor814/5834 is trying to release lock (&dev_instance_lock_key) at:
[<ffffffff89f41f56>] netdev_unlock include/linux/netdevice.h:2756 [inline]
[<ffffffff89f41f56>] netdev_unlock_ops include/net/netdev_lock.h:48 [inline]
[<ffffffff89f41f56>] do_setlink+0xc26/0x43a0 net/core/rtnetlink.c:3406
but there are no more locks to release!
other info that might help us debug this:
1 lock held by syz-executor814/5834:
#0: ffffffff900fc408 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock net/core/rtnetlink.c:80 [inline]
#0: ffffffff900fc408 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock net/core/rtnetlink.c:341 [inline]
#0: ffffffff900fc408 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_newlink+0xd68/0x1fe0 net/core/rtnetlink.c:4064
stack backtrace:
CPU: 0 UID: 0 PID: 5834 Comm: syz-executor814 Not tainted 6.14.0-syzkaller-12504-g8bc251e5d874 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_unlock_imbalance_bug+0x185/0x1a0 kernel/locking/lockdep.c:5296
__lock_release kernel/locking/lockdep.c:5535 [inline]
lock_release+0x1ed/0x3e0 kernel/locking/lockdep.c:5887
__mutex_unlock_slowpath+0xee/0x800 kernel/locking/mutex.c:907
netdev_unlock include/linux/netdevice.h:2756 [inline]
netdev_unlock_ops include/net/netdev_lock.h:48 [inline]
do_setlink+0xc26/0x43a0 net/core/rtnetlink.c:3406
rtnl_group_changelink net/core/rtnetlink.c:3783 [inline]
__rtnl_newlink net/core/rtnetlink.c:3937 [inline]
rtnl_newlink+0x1619/0x1fe0 net/core/rtnetlink.c:4065
rtnetlink_rcv_msg+0x80f/0xd70 net/core/rtnetlink.c:6955
netlink_rcv_skb+0x208/0x480 net/netlink/af_netlink.c:2534
netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
netlink_unicast+0x7f8/0x9a0 net/netlink/af_netlink.c:1339
netlink_sendmsg+0x8c3/0xcd0 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:727
____sys_sendmsg+0x523/0x860 net/socket.c:2566
___sys_sendmsg net/socket.c:2620 [inline]
__sys_sendmsg+0x271/0x360 net/socket.c:2652
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f8427b614a9
Code: 48 83 c4 28 c3 e8 37 17 00 00 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fff9b59f3a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007fff9b59f578 RCX: 00007f8427b614a9
RDX: 0000000000000000 RSI: 0000200000000300 RDI: 0000000000000004
RBP: 00007f8427bd4610 R08: 000000000000000c R09: 00007fff9b59f578
R10: 000000000000001b R11: 0000000000000246 R12: 0000000000000001
R13:
Fixes: 4c975fd70002 ("net: hold instance lock during NETDEV_REGISTER/UP")
Reported-by: syzbot+45016fe295243a7882d3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=45016fe295243a7882d3
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250407164229.24414-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric Dumazet says:
====================
rps: misc changes
Minor changes in rps:
skb_flow_limit() is probably unused these days,
and data-races are quite theoretical.
====================
Link: https://patch.msgid.link/20250407163602.170356-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add an rcu_head to sd_flow_limit and rps_sock_flow_table structs
to use the more conventional and predictable k[v]free_rcu().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250407163602.170356-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
softnet_seq_show() reads several fields that might be updated
concurrently. Add READ_ONCE() and WRITE_ONCE() annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250407163602.170356-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
softnet_seq_show() can read fl->count while another cpu
updates this field from skb_flow_limit().
Make this field an 'unsigned int', as its only consumer
only deals with 32 bit.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250407163602.170356-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As explained in commit f3483c8e1da6 ("net: rfs: hash function change"),
masking low order bits of skb_get_hash(skb) has low entropy.
A NIC with 32 RX queues uses the 5 low order bits of rss key
to select a queue. This means all packets landing to a given
queue share the same 5 low order bits.
Switch to hash_32() to reduce hash collisions.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250407163602.170356-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- A number of cpuset remote partition related fixes and cleanups along
with selftest updates.
- A change from this merge window made cgroup_rstat_updated_list()
called outside cgroup_rstat_lock leading to list corruptions. Fix it
by relocating the call inside the lock.
* tag 'cgroup-for-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Fix race between newly created partition and dying one
cgroup: rstat: call cgroup_rstat_updated_list with cgroup_rstat_lock
selftest/cgroup: Add a remote partition transition test to test_cpuset_prs.sh
selftest/cgroup: Clean up and restructure test_cpuset_prs.sh
selftest/cgroup: Update test_cpuset_prs.sh to use | as effective CPUs and state separator
cgroup/cpuset: Remove unneeded goto in sched_partition_write() and rename it
cgroup/cpuset: Code cleanup and comment update
cgroup/cpuset: Don't allow creation of local partition over a remote one
cgroup/cpuset: Remove remote_partition_check() & make update_cpumasks_hier() handle remote partition
cgroup/cpuset: Fix error handling in remote_partition_disable()
cgroup/cpuset: Fix incorrect isolated_cpus update in update_parent_effective_cpumask()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC cleanups from Eric Biggers:
"Finish cleaning up the CRC kconfig options by removing the remaining
unnecessary prompts and an unnecessary 'default y', removing
CONFIG_LIBCRC32C, and documenting all the CRC library options"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crc: remove CONFIG_LIBCRC32C
lib/crc: document all the CRC library kconfig options
lib/crc: remove unnecessary prompt for CONFIG_CRC_ITU_T
lib/crc: remove unnecessary prompt for CONFIG_CRC_T10DIF
lib/crc: remove unnecessary prompt for CONFIG_CRC16
lib/crc: remove unnecessary prompt for CONFIG_CRC_CCITT
lib/crc: remove unnecessary prompt for CONFIG_CRC32 and drop 'default y'
|
|
A recent optimization change in LLVM [1] aims to transform certain loop
idioms into calls to strlen() or wcslen(). This change transforms the
first while loop in UniStrcat() into a call to wcslen(), breaking the
build when UniStrcat() gets inlined into alloc_path_with_tree_prefix():
ld.lld: error: undefined symbol: wcslen
>>> referenced by nls_ucs2_utils.h:54 (fs/smb/client/../../nls/nls_ucs2_utils.h:54)
>>> vmlinux.o:(alloc_path_with_tree_prefix)
>>> referenced by nls_ucs2_utils.h:54 (fs/smb/client/../../nls/nls_ucs2_utils.h:54)
>>> vmlinux.o:(alloc_path_with_tree_prefix)
Disable this optimization with '-fno-builtin-wcslen', which prevents the
compiler from assuming that wcslen() is available in the kernel's C
library.
[ More to the point - it's not that we couldn't implement wcslen(), it's
that this isn't an optimization at all in the context of the kernel.
Replacing a simple inlined loop with a function call to the same loop
is just stupid and pointless if you don't have long strings and fancy
libraries with vectorization support etc.
For the regular 'strlen()' cases, we want the compiler to do this in
order to handle the trivial case of constant strings. And we do have
optimized versions of 'strlen()' on some architectures. But for
wcslen? Just no. - Linus ]
Cc: stable@vger.kernel.org
Link: https://github.com/llvm/llvm-project/commit/9694844d7e36fd5e01011ab56b64f27b867aa72d [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Perf can hang while freeing a sigtrap event if a related deferred
signal hadn't managed to be sent before the file got closed:
perf_event_overflow()
task_work_add(perf_pending_task)
fput()
task_work_add(____fput())
task_work_run()
____fput()
perf_release()
perf_event_release_kernel()
_free_event()
perf_pending_task_sync()
task_work_cancel() -> FAILED
rcuwait_wait_event()
Once task_work_run() is running, the list of pending callbacks is
removed from the task_struct and from this point on task_work_cancel()
can't remove any pending and not yet started work items, hence the
task_work_cancel() failure and the hang on rcuwait_wait_event().
Task work could be changed to remove one work at a time, so a work
running on the current task can always cancel a pending one, however
the wait / wake design is still subject to inverted dependencies when
remote targets are involved, as pictured by Oleg:
T1 T2
fd = perf_event_open(pid => T2->pid); fd = perf_event_open(pid => T1->pid);
close(fd) close(fd)
<IRQ> <IRQ>
perf_event_overflow() perf_event_overflow()
task_work_add(perf_pending_task) task_work_add(perf_pending_task)
</IRQ> </IRQ>
fput() fput()
task_work_add(____fput()) task_work_add(____fput())
task_work_run() task_work_run()
____fput() ____fput()
perf_release() perf_release()
perf_event_release_kernel() perf_event_release_kernel()
_free_event() _free_event()
perf_pending_task_sync() perf_pending_task_sync()
rcuwait_wait_event() rcuwait_wait_event()
Therefore the only option left is to acquire the event reference count
upon queueing the perf task work and release it from the task work, just
like it was done before 3a5465418f5f ("perf: Fix event leak upon exec and file release")
but without the leaks it fixed.
Some adjustments are necessary to make it work:
* A child event might dereference its parent upon freeing. Care must be
taken to release the parent last.
* Some places assuming the event doesn't have any reference held and
therefore can be freed right away must instead put the reference and
let the reference counting to its job.
Reported-by: "Yi Lai" <yi1.lai@linux.intel.com>
Closes: https://lore.kernel.org/all/Zx9Losv4YcJowaP%2F@ly-workstation/
Reported-by: syzbot+3c4321e10eea460eb606@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/673adf75.050a0220.87769.0024.GAE@google.com/
Fixes: 3a5465418f5f ("perf: Fix event leak upon exec and file release")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250304135446.18905-1-frederic@kernel.org
|
|
Some operations require checking, or ignoring, specific bits in an address
value. For example, this can be comparing address values to identify unique
structures.
Currently, the full address value is compared when filtering for duplicates.
This results in over counting and creation of extra records. This gives the
impression that more unique events occurred than did in reality.
Mask the address for physical rows on MI300.
[ bp: Simplify. ]
Fixes: 6f15e617cc99 ("RAS: Introduce a FRU memory poison manager")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
|
|
drm_analog_tv_mode() and its variants return a drm_display_mode that
needs to be destroyed later one. The
drm_test_connector_helper_tv_get_modes_check() test never does however,
which leads to a memory leak.
Let's make sure it's freed.
Reported-by: Philipp Stanner <phasta@mailbox.org>
Closes: https://lore.kernel.org/dri-devel/a7655158a6367ac46194d57f4b7433ef0772a73e.camel@mailbox.org/
Fixes: 1e4a91db109f ("drm/probe-helper: Provide a TV get_modes helper")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250408-drm-kunit-drm-display-mode-memleak-v1-7-996305a2e75a@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_analog_tv_mode() and its variants return a drm_display_mode that
needs to be destroyed later one. The
drm_test_modes_analog_tv_mono_576i() test never does however, which
leads to a memory leak.
Let's make sure it's freed.
Reported-by: Philipp Stanner <phasta@mailbox.org>
Closes: https://lore.kernel.org/dri-devel/a7655158a6367ac46194d57f4b7433ef0772a73e.camel@mailbox.org/
Fixes: e31538489908 ("drm/tests: Add tests for the new Monochrome value of tv_mode")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250408-drm-kunit-drm-display-mode-memleak-v1-6-996305a2e75a@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_analog_tv_mode() and its variants return a drm_display_mode that
needs to be destroyed later one. The drm_modes_analog_tv tests never
do however, which leads to a memory leak.
Let's make sure it's freed.
Reported-by: Philipp Stanner <phasta@mailbox.org>
Closes: https://lore.kernel.org/dri-devel/a7655158a6367ac46194d57f4b7433ef0772a73e.camel@mailbox.org/
Fixes: 4fcd238560ee ("drm/modes: Add a function to generate analog display modes")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250408-drm-kunit-drm-display-mode-memleak-v1-5-996305a2e75a@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_analog_tv_mode() and its variants return a drm_display_mode that
needs to be destroyed later one. The drm_test_cmdline_tv_options() test
never does however, which leads to a memory leak.
Let's make sure it's freed.
Reported-by: Philipp Stanner <phasta@mailbox.org>
Closes: https://lore.kernel.org/dri-devel/a7655158a6367ac46194d57f4b7433ef0772a73e.camel@mailbox.org/
Fixes: e691c9992ae1 ("drm/modes: Introduce the tv_mode property as a command-line option")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250408-drm-kunit-drm-display-mode-memleak-v1-4-996305a2e75a@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_analog_tv_mode() and its variants return a drm_display_mode that
needs to be destroyed later one. The drm_test_pick_cmdline_named() test
never does however, which leads to a memory leak.
Let's make sure it's freed.
Reported-by: Philipp Stanner <phasta@mailbox.org>
Closes: https://lore.kernel.org/dri-devel/a7655158a6367ac46194d57f4b7433ef0772a73e.camel@mailbox.org/
Fixes: fedcaf726f54 ("drm/modes: Properly generate a drm_display_mode from a named mode")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250408-drm-kunit-drm-display-mode-memleak-v1-3-996305a2e75a@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_mode_find_dmt() returns a drm_display_mode that needs to be
destroyed later one. The drm_test_pick_cmdline_res_1920_1080_60() test
never does however, which leads to a memory leak.
Let's make sure it's freed.
Reported-by: Philipp Stanner <phasta@mailbox.org>
Closes: https://lore.kernel.org/dri-devel/a7655158a6367ac46194d57f4b7433ef0772a73e.camel@mailbox.org/
Fixes: 8fc0380f6ba7 ("drm/client: Add some tests for drm_connector_pick_cmdline_mode()")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250408-drm-kunit-drm-display-mode-memleak-v1-2-996305a2e75a@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
A number of test suites call functions that expect the returned
drm_display_mode to be destroyed eventually.
However, none of the tests called drm_mode_destroy, which results in a
memory leak.
Since drm_mode_destroy takes two pointers as argument, we can't use a
kunit wrapper. Let's just create a helper every test suite can use.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250408-drm-kunit-drm-display-mode-memleak-v1-1-996305a2e75a@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
There's a consistent pattern where the .cleanup_data() callback is
called when .prepare_data() fails, when it should really be called to
clean after a successful .prepare_data() as per the documentation.
Rewrite the error-handling paths to make sure we don't cleanup
un-prepared data.
Fixes: c781ff12a2f3 ("ethtool: Allow network drivers to dump arbitrary EEPROM data")
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250407130511.75621-1-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The tfilter_notify() and tfilter_del_notify() functions assume that
NLMSG_GOODSIZE is always enough to dump the filter chain. This is not
always the case, which can lead to silent notify failures (because the
return code of tfilter_notify() is not always checked). In particular,
this can lead to NLM_F_ECHO not being honoured even though an action
succeeds, which forces userspace to create workarounds[0].
Fix this by increasing the message size if dumping the filter chain into
the allocated skb fails. Use the size of the incoming skb as a size hint
if set, so we can start at a larger value when appropriate.
To trigger this, run the following commands:
# ip link add type veth
# tc qdisc replace dev veth0 root handle 1: fq_codel
# tc -echo filter add dev veth0 parent 1: u32 match u32 0 0 $(for i in $(seq 32); do echo action pedit munge ip dport set 22; done)
Before this fix, tc just returns:
Not a filter(cmd 2)
After the fix, we get the correct echo:
added filter dev veth0 parent 1: protocol all pref 49152 u32 chain 0 fh 800::800 order 2048 key ht 800 bkt 0 terminal flowid not_in_hw
match 00000000/00000000 at 0
action order 1: pedit action pass keys 1
index 1 ref 1 bind 1
key #0 at 20: val 00000016 mask ffff0000
[repeated 32 times]
[0] https://github.com/openvswitch/ovs/commit/106ef21860c935e5e0017a88bf42b94025c4e511
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Frode Nordahl <frode.nordahl@canonical.com>
Closes: https://bugs.launchpad.net/ubuntu/+source/openvswitch/+bug/2018500
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250407105542.16601-1-toke@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
WX_RXD_IPV6EX was incorrectly defined in Rx ring descriptor. In fact, this
field stores the 802.1ad ID from which the packet was received. The wrong
definition caused the statistics rx_csum_offload_errors to fail to grow
when receiving the 802.1ad packet with incorrect checksum.
Fixes: ef4f3c19f912 ("net: wangxun: libwx add rx offload functions")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/20250407103322.273241-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use SPDX-License-Identifier accross all the files of the xgbe driver to
ensure compliance with Linux kernel standards, thus removing the
boiler-plate template license text.
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250407102913.3063691-1-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When running as a PVH dom0 the ACPI tables exposed to Linux are (mostly)
the native ones, thus exposing the C and P states, that can lead to
attachment of CPU idle and frequency drivers. However the entity in
control of the CPU C and P states is Xen, as dom0 doesn't have a full view
of the system load, neither has all CPUs assigned and identity pinned.
Like it's done for classic PV guests, prevent Linux from using idle or
frequency state drivers when running as a PVH dom0.
On an AMD EPYC 7543P system without this fix a Linux PVH dom0 will keep the
host CPUs spinning at 100% even when dom0 is completely idle, as it's
attempting to use the acpi_idle driver.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250407101842.67228-1-roger.pau@citrix.com>
|
|
Remove the double negation and simplify the if condition.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250407091442.743478-1-thorsten.blum@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The __get_unaligned_cpu32 function is deprecated. So, replace it with
the more generic get_unaligned and just cast the input parameter.
Signed-off-by: Julian Vetter <julian@outer-limits.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250407083306.1553921-1-julian@outer-limits.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If the destination buffer has a fixed length, strscpy_pad()
automatically determines its size using sizeof() when the argument is
omitted. This makes the explicit sizeof() calls unnecessary - remove
them.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250407082607.741919-2-thorsten.blum@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The current code configures the Physical Function (PF) root node at TL1
and the Virtual Function (VF) root node at TL2.
This ensure at any given point of time PF traffic gets more priority.
PF root node
TL1
/ \
TL2 TL2 VF root node
/ \
TL3 TL3
/ \
TL4 TL4
/ \
SMQ SMQ
Due to a bug in the current code, the TL2 parent queue index on the
VF interface is not being configured, leading to 'SMQ Flush' errors
Fixes: 5e6808b4c68d ("octeontx2-pf: Add support for HTB offload")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250407070341.2765426-1-hkelam@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64: First batch of fixes for 6.15
- Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
stage-1 page tables) to align with the architecture. This avoids
possibly taking an SEA at EL2 on the page table walk or using an
architecturally UNKNOWN fault IPA.
- Use acquire/release semantics in the KVM FF-A proxy to avoid reading
a stale value for the FF-A version.
- Fix KVM guest driver to match PV CPUID hypercall ABI.
- Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
selftests, which is the only memory type for which atomic
instructions are architecturally guaranteed to work.
|
|
strcpy() is deprecated, use strscpy() instead.
Link: https://github.com/KSPP/linux/issues/88
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250407090832.743255-1-thorsten.blum@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
"Inspired" by syzbot test, pre-queue some data, disconnect()
and try to receive(). This used to trigger a warning in TLS's strp.
Now we expect the disconnect() to have almost no effect.
Link: https://lore.kernel.org/67e6be74.050a0220.2f068f.007e.GAE@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250404180334.3224206-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
syzbot discovered that it can disconnect a TLS socket and then
run into all sort of unexpected corner cases. I have a vague
recollection of Eric pointing this out to us a long time ago.
Supporting disconnect is really hard, for one thing if offload
is enabled we'd need to wait for all packets to be _acked_.
Disconnect is not commonly used, disallow it.
The immediate problem syzbot run into is the warning in the strp,
but that's just the easiest bug to trigger:
WARNING: CPU: 0 PID: 5834 at net/tls/tls_strp.c:486 tls_strp_msg_load+0x72e/0xa80 net/tls/tls_strp.c:486
RIP: 0010:tls_strp_msg_load+0x72e/0xa80 net/tls/tls_strp.c:486
Call Trace:
<TASK>
tls_rx_rec_wait+0x280/0xa60 net/tls/tls_sw.c:1363
tls_sw_recvmsg+0x85c/0x1c30 net/tls/tls_sw.c:2043
inet6_recvmsg+0x2c9/0x730 net/ipv6/af_inet6.c:678
sock_recvmsg_nosec net/socket.c:1023 [inline]
sock_recvmsg+0x109/0x280 net/socket.c:1045
__sys_recvfrom+0x202/0x380 net/socket.c:2237
Fixes: 3c4d7559159b ("tls: kernel TLS support")
Reported-by: syzbot+b4cd76826045a1eb93c1@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250404180334.3224206-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
sctp_sendmsg() re-uses associations and transports when possible by
doing a lookup based on the socket endpoint and the message destination
address, and then sctp_sendmsg_to_asoc() sets the selected transport in
all the message chunks to be sent.
There's a possible race condition if another thread triggers the removal
of that selected transport, for instance, by explicitly unbinding an
address with setsockopt(SCTP_SOCKOPT_BINDX_REM), after the chunks have
been set up and before the message is sent. This can happen if the send
buffer is full, during the period when the sender thread temporarily
releases the socket lock in sctp_wait_for_sndbuf().
This causes the access to the transport data in
sctp_outq_select_transport(), when the association outqueue is flushed,
to result in a use-after-free read.
This change avoids this scenario by having sctp_transport_free() signal
the freeing of the transport, tagging it as "dead". In order to do this,
the patch restores the "dead" bit in struct sctp_transport, which was
removed in
commit 47faa1e4c50e ("sctp: remove the dead field of sctp_transport").
Then, in the scenario where the sender thread has released the socket
lock in sctp_wait_for_sndbuf(), the bit is checked again after
re-acquiring the socket lock to detect the deletion. This is done while
holding a reference to the transport to prevent it from being freed in
the process.
If the transport was deleted while the socket lock was relinquished,
sctp_sendmsg_to_asoc() will return -EAGAIN to let userspace retry the
send.
The bug was found by a private syzbot instance (see the error report [1]
and the C reproducer that triggers it [2]).
Link: https://people.igalia.com/rcn/kernel_logs/20250402__KASAN_slab-use-after-free_Read_in_sctp_outq_select_transport.txt [1]
Link: https://people.igalia.com/rcn/kernel_logs/20250402__KASAN_slab-use-after-free_Read_in_sctp_outq_select_transport__repro.c [2]
Cc: stable@vger.kernel.org
Fixes: df132eff4638 ("sctp: clear the transport of some out_chunk_list chunks in sctp_assoc_rm_peer")
Suggested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Ricardo Cañuelo Navarro <rcn@igalia.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250404-kasan_slab-use-after-free_read_in_sctp_outq_select_transport__20250404-v1-1-5ce4a0b78ef2@igalia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Merge series from srinivas.kandagatla@linaro.org:
This two patches fixes below two issues with the VI setup.
1. Only one channel gets enabled on VI feedback patch instead of two
channels
2. recording rate is hardcoded to 8K instead dyamically setting it up.
Both of these issues are fixed in these patches.
|
|
The regulator comment in of_gpio_set_polarity_by_property()
made on top of a couple of the cases, while Atmel HSMCI quirk
is not related to that. Make it clear by moving Atmel HSMCI
quirk up out of the scope of the regulator comment.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250402122058.1517393-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The Ingenic NAND quirk has been added under CONFIG_LCD_HX8357 ifdeffery
which sounds quite wrong. Fix the choice for Ingenic NAND quirk
by wrapping it into own ifdeffery related to the respective driver.
Fixes: 3a7fd473bd5d ("mtd: rawnand: ingenic: move the GPIO quirk to gpiolib-of.c")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250402122058.1517393-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Cong Wang says:
====================
net_sched: make ->qlen_notify() idempotent
Gerrard reported a vulnerability exists in fq_codel where manipulating
the MTU can cause codel_dequeue() to drop all packets. The parent qdisc's
sch->q.qlen is only updated via ->qlen_notify() if the fq_codel queue
remains non-empty after the drops. This discrepancy in qlen between
fq_codel and its parent can lead to a use-after-free condition.
Let's fix this by making all existing ->qlen_notify() idempotent so that
the sch->q.qlen check will be no longer necessary.
Patch 1~5 make all existing ->qlen_notify() idempotent to prepare for
patch 6 which removes the sch->q.qlen check. They are followed by 5
selftests for each type of Qdisc's we touch here.
All existing and new Qdisc selftests pass after this patchset.
Fixes: 4b549a2ef4be ("fq_codel: Fair Queue Codel AQM")
Fixes: 76e3cc126bb2 ("codel: Controlled Delay AQM")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
====================
Link: https://patch.msgid.link/20250403211033.166059-1-xiyou.wangcong@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a test case for FQ_CODEL with ETS parent to verify packet drop
behavior when the queue becomes empty. This helps ensure proper
notification mechanisms between qdiscs.
Note this is best-effort, it is hard to play with those parameters
perfectly to always trigger ->qlen_notify().
Cc: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250403211636.166257-6-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a test case for FQ_CODEL with DRR parent to verify packet drop
behavior when the queue becomes empty. This helps ensure proper
notification mechanisms between qdiscs.
Note this is best-effort, it is hard to play with those parameters
perfectly to always trigger ->qlen_notify().
Cc: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250403211636.166257-5-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a test case for FQ_CODEL with HFSC parent to verify packet drop
behavior when the queue becomes empty. This helps ensure proper
notification mechanisms between qdiscs.
Note this is best-effort, it is hard to play with those parameters
perfectly to always trigger ->qlen_notify().
Cc: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250403211636.166257-4-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a test case for FQ_CODEL with QFQ parent to verify packet drop
behavior when the queue becomes empty. This helps ensure proper
notification mechanisms between qdiscs.
Note this is best-effort, it is hard to play with those parameters
perfectly to always trigger ->qlen_notify().
Cc: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250403211636.166257-3-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a test case for FQ_CODEL with HTB parent to verify packet drop
behavior when the queue becomes empty. This helps ensure proper
notification mechanisms between qdiscs.
Note this is best-effort, it is hard to play with those parameters
perfectly to always trigger ->qlen_notify().
Cc: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250403211636.166257-2-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
After making all ->qlen_notify() callbacks idempotent, now it is safe to
remove the check of qlen!=0 from both fq_codel_dequeue() and
codel_qdisc_dequeue().
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Fixes: 4b549a2ef4be ("fq_codel: Fair Queue Codel AQM")
Fixes: 76e3cc126bb2 ("codel: Controlled Delay AQM")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250403211636.166257-1-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
est_qlen_notify() deletes its class from its active list with
list_del() when qlen is 0, therefore, it is not idempotent and
not friendly to its callers, like fq_codel_dequeue().
Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers'
life. Also change other list_del()'s to list_del_init() just to be
extra safe.
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20250403211033.166059-6-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
qfq_qlen_notify() always deletes its class from its active list
with list_del_init() _and_ calls qfq_deactivate_agg() when the whole list
becomes empty.
To make it idempotent, just skip everything when it is not in the active
list.
Also change other list_del()'s to list_del_init() just to be extra safe.
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250403211033.166059-5-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
hfsc_qlen_notify() is not idempotent either and not friendly
to its callers, like fq_codel_dequeue(). Let's make it idempotent
to ease qdisc_tree_reduce_backlog() callers' life:
1. update_vf() decreases cl->cl_nactive, so we can check whether it is
non-zero before calling it.
2. eltree_remove() always removes RB node cl->el_node, but we can use
RB_EMPTY_NODE() + RB_CLEAR_NODE() to make it safe.
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250403211033.166059-4-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
drr_qlen_notify() always deletes the DRR class from its active list
with list_del(), therefore, it is not idempotent and not friendly
to its callers, like fq_codel_dequeue().
Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers'
life. Also change other list_del()'s to list_del_init() just to be
extra safe.
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250403211033.166059-3-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
htb_qlen_notify() always deactivates the HTB class and in fact could
trigger a warning if it is already deactivated. Therefore, it is not
idempotent and not friendly to its callers, like fq_codel_dequeue().
Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers'
life.
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250403211033.166059-2-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Device can be unbound, so driver must also release memory for the wakeup
source.
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250406202245.53854-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Device can be unbound, so driver must also release memory for the wakeup
source.
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250406202245.53854-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
