| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"A RISC-V irqchip driver fix"
* tag 'irq-urgent-2024-03-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/riscv-intc: Fix use of AIA interrupts 32-63 on riscv32
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Two regression fixes that had been introduced in this merge window,
additional HD-audio quirks, and a further enhancement for the new
kunit"
* tag 'sound-fix-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: core: add kunitconfig
ALSA: hda/realtek: add in quirk for Acer Swift Go 16 - SFG16-71
Revert "ALSA: usb-audio: Name feature ctl using output if input is PCM"
ALSA: timer: Fix missing irq-disable at closing
ALSA: hda/realtek: Add quirk for Lenovo Yoga 9 14IMH9
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"Not much this cycle with only three patches.
Core:
- i3c_bus_type is now const
Drivers:
- dw: disabling IBI is only allowed when hot join and SIR are disabled"
* tag 'i3c/for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: Make i3c_bus_type const
i3c: dw: Disable IBI IRQ depends on hot-join and SIR enabling
dt-bindings: i3c: drop "master" node name suffix
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fix from Ard Biesheuvel:
"This fixes an oversight on my part in the recent EFI stub rework for
x86, which is needed to get Linux/x86 distro builds signed again for
secure boot by Microsoft. For this reason, most of this work is being
backported to v6.1, which is therefore also affected by this
regression.
- Explicitly wipe BSS in the native EFI entrypoint, so that globals
shared with the legacy decompressor are zero-initialized correctly"
* tag 'efi-fixes-for-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
x86/efistub: Clear decompressor BSS in native EFI entrypoint
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Fix timer migration bug that can result in long bootup delays and
other oddities"
* tag 'timers-urgent-2024-03-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timer/migration: Remove buggy early return on deactivation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf event fixes from Ingo Molnar:
- Work around AMD erratum to filter out bogus LBR stack entries
- Fix incorrect PMU reset that can result in warnings (or worse)
during suspend/hibernation
* tag 'perf-urgent-2024-03-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/amd/core: Avoid register reset when CPU is dead
perf/x86/amd/lbr: Discard erroneous branch entries
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Remove usage of the deprecated ida_simple_xx() API
- Add kernel-doc for wdt_set_timeout()
- Add support for R-Car V4M, StarFive's JH8100 and sam9x7-wdt
- Fixes and small improvements
* tag 'linux-watchdog-6.9-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: intel-mid_wdt: Get platform data via dev_get_platdata()
watchdog: intel-mid_wdt: Don't use "proxy" headers
watchdog: intel-mid_wdt: Remove unused intel-mid.h
dt-bindings: watchdog: sama5d4-wdt: add compatible for sam9x7-wdt
dt-bindings: watchdog: sprd,sp9860-wdt: convert to YAML
dt-bindings: watchdog: starfive,jh7100-wdt: Add compatible for JH8100
watchdog: stm32_iwdg: initialize default timeout
dt-bindings: watchdog: arm,sp805: document the reset signal
watchdog: sp805_wdt: deassert the reset if available
watchdog/hpwdt: Support Suspend and Resume
dt-bindings: watchdog: renesas-wdt: Add support for R-Car V4M
watchdog: starfive: check watchdog status before enabling in system resume
watchdog: starfive: Check pm_runtime_enabled() before decrementing usage counter
watchdog: qcom: fine tune the max timeout value calculation
watchdog: Add kernel-doc for wdt_set_timeout()
watchdog: core: Remove usage of the deprecated ida_simple_xx() API
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux
Pull PCMCIA updates from Dominik Brodowski:
"Mark some structs 'const' now that the driver core supports it
(Ricardo B Marliere)"
* tag 'pcmcia-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
pcmcia: cs: make pcmcia_socket_class constant
pcmcia: ds: make pcmcia_bus_type const
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a new driver for Goodix Berlin I2C and SPI touch controllers
- support for IQS7222D v1.1 and v1.2 in iqs7222 driver
- support for IST3032C and IST3038B parts in Imagis touchscreen driver
- support for touch keys for Imagis touchscreen controllers
- support for Snakebyte GAMEPADs in xpad driver
- various cleanups and conversions to yaml for device tree bindings
- assorted fixes and cleanups
- old Synaptics navpoint driver has been removed since the only board
that used it (HP iPAQ hx4700) was removed a while ago.
* tag 'input-for-v6.9-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (37 commits)
Input: xpad - add support for Snakebyte GAMEPADs
dt-bindings: input: samsung,s3c6410-keypad: convert to DT Schema
Input: imagis - add touch key support
dt-bindings: input: imagis: Document touch keys
Input: imagis - use FIELD_GET where applicable
Input: make input_class constant
dt-bindings: input: atmel,captouch: convert bindings to YAML
Input: iqs7222 - add support for IQS7222D v1.1 and v1.2
dt-bindings: input: allwinner,sun4i-a10-lrad: drop redundant type from label
Input: serio - make serio_bus const
Input: synaptics-rmi4 - make rmi_bus_type const
Input: xilinx_ps2 - fix kernel-doc for xps2_of_probe function
input/touchscreen: imagis: add support for IST3032C
dt-bindings: input/touchscreen: imagis: add compatible for IST3032C
input/touchscreen: imagis: Add support for Imagis IST3038B
dt-bindings: input/touchscreen: Add compatible for IST3038B
input/touchscreen: imagis: Correct the maximum touch area value
Input: leds - change config symbol dependency for audio mute trigger
Input: ti_am335x_tsc - remove redundant assignment to variable config
Input: xpad - sort xpad_device by vendor and product ID
...
|
|
It is helpful to add .kunitconfig if we work with the tools provided by
KUnit project. The file describes the series of kernel configurations to
satisfy the dependency to build the target test.
For example:
$ ./tools/testing/kunit/kunit.py run --arch=arm64 --cross_compile=aarch64-linux-gnu- --kunitconfig=sound/core/
[11:35:13] Configuring KUnit Kernel ...
Regenerating .config ...
Populating config with:
$ make ARCH=arm64 O=.kunit olddefconfig CROSS_COMPILE=aarch64-linux-gnu-
[11:35:19] Building KUnit Kernel ...
Populating config with:
$ make ARCH=arm64 O=.kunit olddefconfig CROSS_COMPILE=aarch64-linux-gnu-
Building with:
$ make ARCH=arm64 O=.kunit --jobs=8 CROSS_COMPILE=aarch64-linux-gnu-
[11:37:35] Starting KUnit Kernel (1/1)...
[11:37:35] ============================================================
Running tests with:
$ qemu-system-aarch64 -nodefaults -m 1024 -kernel .kunit/arch/arm64/boot/Image.gz -append 'kunit.enable=1 console=ttyAMA0 kunit_shutdown=reboot' -no-reboot -nographic -serial stdio -machine virt -cpu max,pauth-impdef=on
[11:37:35] ============== sound-core-test (10 subtests) ===============
[11:37:35] [PASSED] test_phys_format_size
[11:37:35] [PASSED] test_format_width
[11:37:35] [PASSED] test_format_endianness
[11:37:35] [PASSED] test_format_signed
[11:37:35] [PASSED] test_format_fill_silence
[11:37:35] [PASSED] test_playback_avail
[11:37:35] [PASSED] test_capture_avail
[11:37:35] [PASSED] test_card_set_id
[11:37:35] [PASSED] test_pcm_format_name
[11:37:35] [PASSED] test_card_add_component
[11:37:35] ================= [PASSED] sound-core-test =================
[11:37:35] ============================================================
[11:37:35] Testing complete. Ran 10 tests: passed: 10
[11:37:35] Elapsed time: 142.333s total, 5.617s configuring, 136.047s building, 0.630s running
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Message-ID: <20240317024050.588370-1-o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Keyboard has an LED that is ON/OFF when mic is muted/active
- LED is controlled by GPIO pin
- Patch enables led to appear in /sys/class/leds/ as hda::micmute
- Enables LED when mic is MUTED
- Disables LED when mic is active
[ fixed white spaces by tiwai ]
Signed-off-by: Ian Murphy <iano200@gmail.com>
Message-ID: <20240316094157.13890-1-iano200@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This reverts commit 1601cd53c7e3197181277326dbfc131d20a74e46.
This fix is applied globally to all devices, and it may change the
existing control names. When the devices are managed with the fixed
configuration like UCM, such control name mismatch may lead to
significant regressions.
For avoiding that kind of regression, we would need to apply such
changes conditionally, but it'd take time to settle down.
While the original fix is a good thing in general, in order to address
the regression, let's revert the change for now.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218605
Reported-and-tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Message-ID: <20240316083744.28126-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull SCSI updates from James Bottomley:
"Only a couple of driver updates this time (lpfc and mpt3sas) plus the
usual assorted minor fixes and updates. The major core update is a set
of patches moving retries out of the drivers and into the core"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (84 commits)
scsi: core: Constify the struct device_type usage
scsi: libfc: replace deprecated strncpy() with memcpy()
scsi: lpfc: Replace deprecated strncpy() with strscpy()
scsi: bfa: Fix function pointer type mismatch for state machines
scsi: bfa: Fix function pointer type mismatch for hcb_qe->cbfn
scsi: bfa: Remove additional unnecessary struct declarations
scsi: csiostor: Avoid function pointer casts
scsi: qla1280: Remove redundant assignment to variable 'mr'
scsi: core: Make scsi_bus_type const
scsi: core: Really include kunit tests with SCSI_LIB_KUNIT_TEST
scsi: target: tcm_loop: Make tcm_loop_lld_bus const
scsi: scsi_debug: Make pseudo_lld_bus const
scsi: iscsi: Make iscsi_flashnode_bus const
scsi: fcoe: Make fcoe_bus_type const
scsi: lpfc: Copyright updates for 14.4.0.0 patches
scsi: lpfc: Update lpfc version to 14.4.0.0
scsi: lpfc: Change lpfc_vport load_flag member into a bitmask
scsi: lpfc: Change lpfc_vport fc_flag member into a bitmask
scsi: lpfc: Protect vport fc_nodes list with an explicit spin lock
scsi: lpfc: Change nlp state statistic counters into atomic_t
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture updates and fixes from Helge Deller:
"Fixes for the IPv4 and IPv6 checksum functions, a fix for the 64-bit
unaligned memory exception handler and various code cleanups.
Most of the patches are tagged for stable series.
- Fix inline assembly in ipv4 and ipv6 checksum functions (Guenter
Roeck)
- Rewrite 64-bit inline assembly of emulate_ldd() (Guenter Roeck)
- Do not clobber carry/borrow bits in tophys and tovirt macros (John
David Anglin)
- Warn when kernel accesses unaligned memory"
* tag 'parisc-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: led: Convert to platform remove callback returning void
parisc: Strip upper 32 bit of sum in csum_ipv6_magic for 64-bit builds
parisc: Fix csum_ipv6_magic on 64-bit systems
parisc: Fix csum_ipv6_magic on 32-bit systems
parisc: Fix ip_fast_csum
parisc: Avoid clobbering the C/B bits in the PSW with tophys and tovirt macros
parisc/unaligned: Rewrite 64-bit inline assembly of emulate_ldd()
parisc: make parisc_bus_type const
parisc: avoid c23 'nullptr' idenitifier
parisc: Show kernel unaligned memory accesses
parisc: Use irq_enter_rcu() to fix warning at kernel/context_tracking.c:367
|
|
When a CPU enters into idle and deactivates itself from the timer
migration hierarchy without any global timer of its own to propagate,
the group event of that CPU is set to "ignore" and tmigr_update_events()
accordingly performs an early return without considering timers queued
by other CPUs.
If the hierarchy has a single level, and the CPU is the last one to
enter idle, it will ignore others' global timers, as in the following
layout:
[GRP0:0]
migrator = 0
active = 0
nextevt = T0i
/ \
0 1
active (T0i) idle (T1)
0) CPU 0 is active thus its event is ignored (the letter 'i') and so are
upper levels' events. CPU 1 is idle and has the timer T1 enqueued.
[GRP0:0]
migrator = NONE
active = NONE
nextevt = T0i
/ \
0 1
idle (T0i) idle (T1)
1) CPU 0 goes idle without global event queued. Therefore KTIME_MAX is
pushed as its next expiry and its own event kept as "ignore". As a result
tmigr_update_events() ignores T1 and CPU 0 goes to idle with T1
unhandled.
This isn't proper to single level hierarchy though. A similar issue,
although slightly different, may arise on multi-level:
[GRP1:0]
migrator = GRP0:0
active = GRP0:0
nextevt = T0:0i, T0:1
/ \
[GRP0:0] [GRP0:1]
migrator = 0 migrator = NONE
active = 0 active = NONE
nextevt = T0i nextevt = T2
/ \ / \
0 (T0i) 1 (T1) 2 (T2) 3
active idle idle idle
0) CPU 0 is active thus its event is ignored (the letter 'i') and so are
upper levels' events. CPU 1 is idle and has the timer T1 enqueued.
CPU 2 also has a timer. The expiry order is T0 (ignored) < T1 < T2
[GRP1:0]
migrator = GRP0:0
active = GRP0:0
nextevt = T0:0i, T0:1
/ \
[GRP0:0] [GRP0:1]
migrator = NONE migrator = NONE
active = NONE active = NONE
nextevt = T0i nextevt = T2
/ \ / \
0 (T0i) 1 (T1) 2 (T2) 3
idle idle idle idle
1) CPU 0 goes idle without global event queued. Therefore KTIME_MAX is
pushed as its next expiry and its own event kept as "ignore". As a result
tmigr_update_events() ignores T1. The change only propagated up to 1st
level so far.
[GRP1:0]
migrator = NONE
active = NONE
nextevt = T0:1
/ \
[GRP0:0] [GRP0:1]
migrator = NONE migrator = NONE
active = NONE active = NONE
nextevt = T0i nextevt = T2
/ \ / \
0 (T0i) 1 (T1) 2 (T2) 3
idle idle idle idle
2) The change now propagates up to the top. tmigr_update_events() finds
that the child event is ignored and thus removes it. The top level next
event is now T2 which is returned to CPU 0 as its next effective expiry
to take account for as the global idle migrator. However T1 has been
ignored along the way, leaving it unhandled.
Fix those issues with removing the buggy related early return. Ignored
child events must not prevent from evaluating the other events within
the same group.
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/ZfOhB9ZByTZcBy4u@lothringen
|
|
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Bugfixes:
- Fix for an Oops in the NFSv4.2 listxattr handler
- Correct an incorrect buffer size in listxattr
- Fix for an Oops in the pNFS flexfiles layout
- Fix a refcount leak in NFS O_DIRECT writes
- Fix missing locking in NFS O_DIRECT
- Avoid an infinite loop in pnfs_update_layout
- Fix an overflow in the RPC waitqueue queue length counter
- Ensure that pNFS I/O is also protected by TLS when xprtsec is
specified by the mount options
- Fix a leaked folio lock in the netfs read code
- Fix a potential deadlock in fscache
- Allow setting the fscache uniquifier in NFSv4
- Fix an off by one in root_nfs_cat()
- Fix another off by one in rpc_sockaddr2uaddr()
- nfs4_do_open() can incorrectly trigger state recovery
- Various fixes for connection shutdown
Features and cleanups:
- Ensure that containers only see their own RPC and NFS stats
- Enable nconnect for RDMA
- Remove dead code from nfs_writepage_locked()
- Various tracepoint additions to track EXCHANGE_ID, GETDEVICEINFO,
and mount options"
* tag 'nfs-for-6.9-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (29 commits)
nfs: fix panic when nfs4_ff_layout_prepare_ds() fails
NFS: trace the uniquifier of fscache
NFS: Read unlock folio on nfs_page_create_from_folio() error
NFS: remove unused variable nfs_rpcstat
nfs: fix UAF in direct writes
nfs: properly protect nfs_direct_req fields
NFS: enable nconnect for RDMA
NFSv4: nfs4_do_open() is incorrectly triggering state recovery
NFS: avoid infinite loop in pnfs_update_layout.
NFS: remove sync_mode test from nfs_writepage_locked()
NFSv4.1/pnfs: fix NFS with TLS in pnfs
NFS: Fix an off by one in root_nfs_cat()
nfs: make the rpc_stat per net namespace
nfs: expose /proc/net/sunrpc/nfs in net namespaces
sunrpc: add a struct rpc_stats arg to rpc_create_args
nfs: remove unused NFS_CALL macro
NFSv4.1: add tracepoint to trunked nfs4_exchange_id calls
NFS: Fix nfs_netfs_issue_read() xarray locking for writeback interrupt
SUNRPC: increase size of rpc_wait_queue.qlen from unsigned short to unsigned int
nfs: fix regression in handling of fsc= option in NFSv4
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New hardware support:
- Qualcomm X1E80100 PCIe phy support, SM8550 PCIe1 PHY, SC7180 UFS
PHY and SDM630 USBC support
- Rockchip HDMI/eDP Combo PHY driver
- Mediatek MT8365 CSI phy driver
Updates:
- Rework on Qualcomm phy PCS registers and type-c handling
- Cadence torrent phy updates for multilink configuration
- TI gmii resume support"
* tag 'phy-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (41 commits)
phy: constify of_phandle_args in xlate
phy: ti: tusb1210: Define device IDs
phy: ti: tusb1210: Use temporary variable for struct device
phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver
dt-bindings: phy: Add Rockchip HDMI/eDP Combo PHY schema
phy: ti: gmii-sel: add resume support
phy: mtk-mipi-csi: add driver for CSI phy
dt-bindings: phy: add mediatek MIPI CD-PHY module v0.5
phy: cadence-torrent: Add USXGMII(156.25MHz) + SGMII/QSGMII(100MHz) multilink config for TI J7200
dt-bindings: phy: cadence-torrent: Add a separate compatible for TI J7200
phy: cadence-torrent: Add USXGMII(156.25MHz) + SGMII/QSGMII(100MHz) multilink configuration
phy: cadence-torrent: Add PCIe(100MHz) + USXGMII(156.25MHz) multilink configuration
dt-bindings: phy: cadence-torrent: Add optional input reference clock for PLL1
phy: qcom-qmp-ufs: Switch to devm_clk_bulk_get_all() API
dt-bindings: phy: qmp-ufs: Fix PHY clocks
phy: qcom: sgmii-eth: move PCS registers to separate header
phy: qcom: sgmii-eth: use existing register definitions
phy: qcom: qmp-usbc: drop has_pwrdn_delay handling
phy: qcom: qmp: move common bits definitions to common header
phy: qcom: qmp: split DP PHY registers to separate headers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
"Small changes to string processing in device attribute"
* tag 'firewire-updates-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: fix build failure due to the caller of fw_csr_string()
firewire: Convert snprintf/sprintf to sysfs_emit
firewire: Kill unnecessary buf check in device_attribute.show
|
|
Pull CXL updates from Dan Williams:
"CXL has mechanisms to enumerate the performance characteristics of
memory devices. Those mechanisms allow Linux to build the equivalent
of ACPI SRAT, SLIT, and HMAT tables dynamically at runtime. That
capability is necessary because static ACPI can not represent dynamic
CXL configurations (and reconfigurations).
So, building on the v6.8 work to add "Quality of Service" enumeration,
this update plumbs CXL "access coordinates" (read/write access latency
and bandwidth) in all the same places that ACPI HMAT feeds similar
data. Follow-on patches from the -mm side can then use that data to
feed mechanisms like mm/memory-tiers.c. Greg has acked the touch to
drivers/base/.
The other feature update this cycle is support for CXL error injection
via the ACPI EINJ module. That facility enables injection of bus
protocol errors provided the user knows the magic address values to
insert in the interface. To hide that magic, and make this easier to
use, new error injection attributes were added to CXL debugfs. That
interface injects the errors relative to a CXL object rather than
require user tooling to know how to lookup and inject RCRB (Root
Complex Register Block) addresses into the raw EINJ debugfs interface.
It received some helpful review comments from Tony, but no explicit
acks from the ACPI side. The primary user visible change for existing
EINJ users is that they may find that einj.ko was already loaded by
cxl_core.ko. Previously, einj.ko was only loaded on demand.
The usual collection of miscellaneous cleanups are also present this
cycle.
Summary:
- Supplement ACPI HMAT reported memory performance with native CXL
memory performance enumeration
- Add support for CXL error injection via the ACPI EINJ mechanism
- Cleanup CXL DOE and CDAT integration
- Miscellaneous cleanups and fixes"
* tag 'cxl-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (21 commits)
Documentation/ABI/testing/debugfs-cxl: Fix "Unexpected indentation"
lib/firmware_table: Provide buffer length argument to cdat_table_parse()
cxl/pci: Get rid of pointer arithmetic reading CDAT table
cxl/pci: Rename DOE mailbox handle to doe_mb
cxl: Fix the incorrect assignment of SSLBIS entry pointer initial location
cxl/core: Add CXL EINJ debugfs files
EINJ, Documentation: Update EINJ kernel doc
EINJ: Add CXL error type support
EINJ: Migrate to a platform driver
cxl/region: Deal with numa nodes not enumerated by SRAT
cxl/region: Add memory hotplug notifier for cxl region
cxl/region: Add sysfs attribute for locality attributes of CXL regions
cxl/region: Calculate performance data for a region
cxl: Set cxlmd->endpoint before adding port device
cxl: Move QoS class to be calculated from the nearest CPU
cxl: Split out host bridge access coordinates
cxl: Split out combine_coordinates() for common shared usage
ACPI: HMAT / cxl: Add retrieval of generic port coordinates for both access classes
ACPI: HMAT: Introduce 2 levels of generic port access class
base/node / ACPI: Enumerate node access class for 'struct access_coordinate'
...
|
|
We've been seeing the following panic in production
BUG: kernel NULL pointer dereference, address: 0000000000000065
PGD 2f485f067 P4D 2f485f067 PUD 2cc5d8067 PMD 0
RIP: 0010:ff_layout_cancel_io+0x3a/0x90 [nfs_layout_flexfiles]
Call Trace:
<TASK>
? __die+0x78/0xc0
? page_fault_oops+0x286/0x380
? __rpc_execute+0x2c3/0x470 [sunrpc]
? rpc_new_task+0x42/0x1c0 [sunrpc]
? exc_page_fault+0x5d/0x110
? asm_exc_page_fault+0x22/0x30
? ff_layout_free_layoutreturn+0x110/0x110 [nfs_layout_flexfiles]
? ff_layout_cancel_io+0x3a/0x90 [nfs_layout_flexfiles]
? ff_layout_cancel_io+0x6f/0x90 [nfs_layout_flexfiles]
pnfs_mark_matching_lsegs_return+0x1b0/0x360 [nfsv4]
pnfs_error_mark_layout_for_return+0x9e/0x110 [nfsv4]
? ff_layout_send_layouterror+0x50/0x160 [nfs_layout_flexfiles]
nfs4_ff_layout_prepare_ds+0x11f/0x290 [nfs_layout_flexfiles]
ff_layout_pg_init_write+0xf0/0x1f0 [nfs_layout_flexfiles]
__nfs_pageio_add_request+0x154/0x6c0 [nfs]
nfs_pageio_add_request+0x26b/0x380 [nfs]
nfs_do_writepage+0x111/0x1e0 [nfs]
nfs_writepages_callback+0xf/0x30 [nfs]
write_cache_pages+0x17f/0x380
? nfs_pageio_init_write+0x50/0x50 [nfs]
? nfs_writepages+0x6d/0x210 [nfs]
? nfs_writepages+0x6d/0x210 [nfs]
nfs_writepages+0x125/0x210 [nfs]
do_writepages+0x67/0x220
? generic_perform_write+0x14b/0x210
filemap_fdatawrite_wbc+0x5b/0x80
file_write_and_wait_range+0x6d/0xc0
nfs_file_fsync+0x81/0x170 [nfs]
? nfs_file_mmap+0x60/0x60 [nfs]
__x64_sys_fsync+0x53/0x90
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Inspecting the core with drgn I was able to pull this
>>> prog.crashed_thread().stack_trace()[0]
#0 at 0xffffffffa079657a (ff_layout_cancel_io+0x3a/0x84) in ff_layout_cancel_io at fs/nfs/flexfilelayout/flexfilelayout.c:2021:27
>>> prog.crashed_thread().stack_trace()[0]['idx']
(u32)1
>>> prog.crashed_thread().stack_trace()[0]['flseg'].mirror_array[1].mirror_ds
(struct nfs4_ff_layout_ds *)0xffffffffffffffed
This is clear from the stack trace, we call nfs4_ff_layout_prepare_ds()
which could error out initializing the mirror_ds, and then we go to
clean it all up and our check is only for if (!mirror->mirror_ds). This
is inconsistent with the rest of the users of mirror_ds, which have
if (IS_ERR_OR_NULL(mirror_ds))
to keep from tripping over this exact scenario. Fix this up in
ff_layout_cancel_io() to make sure we don't panic when we get an error.
I also spot checked all the other instances of checking mirror_ds and we
appear to be doing the correct checks everywhere, only unconditionally
dereferencing mirror_ds when we know it would be valid.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Fixes: b739a5bd9d9f ("NFSv4/flexfiles: Cancel I/O if the layout is recalled or revoked")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Update them to the correct revision numbers.
Fixes: 522b1d69219d ("x86/cpu/amd: Add a Zenbleed fix")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add AT_HWCAP3 and AT_HWCAP4 aux vector entries for future use
by glibc
- Add support for recognising the Power11 architected and raw PVRs
- Add support for nr_cpus=n on the command line where the
boot CPU is >= n
- Add ppcxx_allmodconfig targets for all 32-bit sub-arches
- Other small features, cleanups and fixes
Thanks to Akanksha J N, Brian King, Christophe Leroy, Dawei Li, Geoff
Levand, Greg Kroah-Hartman, Jan-Benedict Glaw, Kajol Jain, Kunwu Chan,
Li zeming, Madhavan Srinivasan, Masahiro Yamada, Nathan Chancellor,
Nicholas Piggin, Peter Bergner, Qiheng Lin, Randy Dunlap, Ricardo B.
Marliere, Rob Herring, Sathvika Vasireddy, Shrikanth Hegde, Uwe
Kleine-König, Vaibhav Jain, and Wen Xiong.
* tag 'powerpc-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (71 commits)
powerpc/macio: Make remove callback of macio driver void returned
powerpc/83xx: Fix build failure with FPU=n
powerpc/64s: Fix get_hugepd_cache_index() build failure
powerpc/4xx: Fix warp_gpio_leds build failure
powerpc/amigaone: Make several functions static
powerpc/embedded6xx: Fix no previous prototype for avr_uart_send() etc.
macintosh/adb: make adb_dev_class constant
powerpc: xor_vmx: Add '-mhard-float' to CFLAGS
powerpc/fsl: Fix mfpmr() asm constraint error
powerpc: Remove cpu-as-y completely
powerpc/fsl: Modernise mt/mfpmr
powerpc/fsl: Fix mfpmr build errors with newer binutils
powerpc/64s: Use .machine power4 around dcbt
powerpc/64s: Move dcbt/dcbtst sequence into a macro
powerpc/mm: Code cleanup for __hash_page_thp
powerpc/hv-gpci: Fix the H_GET_PERF_COUNTER_INFO hcall return value checks
powerpc/irq: Allow softirq to hardirq stack transition
powerpc: Stop using of_root
powerpc/machdep: Define 'compatibles' property in ppc_md and use it
of: Reimplement of_machine_is_compatible() using of_machine_compatible_match()
...
|
|
checking"
This reverts commits 99101dda29e3186b1356b0dc4dbb835c02c71ac9 and
b80b701d5a67d07f4df4a21e09cb31f6bc1feeca.
Linus reports that the sysreg reserved bit checks in KVM have led to
build failures, arising from commit fdd867fe9b32 ("arm64/sysreg: Add
register fields for ID_AA64DFR1_EL1") giving meaning to fields that were
previously RES0.
Of course, this is a genuine issue, since KVM's sysreg emulation depends
heavily on the definition of reserved fields. But at this point the
build breakage is far more offensive, and the right course of action is
to revert and retry later.
All of these build-time assertions were on by default before
commit 99101dda29e3 ("KVM: arm64: Make build-time check of RES0/RES1
bits optional"), so deliberately revert it all atomically to avoid
introducing further breakage of bisection.
Link: https://lore.kernel.org/all/CAHk-=whCvkhc8BbFOUf1ddOsgSGgEjwoKv77=HEY1UiVCydGqw@mail.gmail.com/
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Prepare input updates for 6.9 merge window.
|
|
Pull block fixes from Jens Axboe:
- Revert of a change for mq-deadline that went into the 6.8 release,
causing a performance regression for some (Bart)
- Revert of the interruptible discard handling. This needs more work
since the ioctl and fs path aren't properly split, and will happen
for the 6.10 kernel release. For 6.9, do the minimal revert
(Christoph)
- Fix for an issue with the timestamp caching code (me)
- kerneldoc fix (Jiapeng)
* tag 'block-6.9-20240315' of git://git.kernel.dk/linux:
block: fix mismatched kerneldoc function name
Revert "blk-lib: check for kill signal"
Revert "block/mq-deadline: use correct way to throttling write requests"
block: limit block time caching to in_task() context
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Avoid unnecessary copying in scomp for trivial SG lists
Algorithms:
- Optimise NEON CCM implementation on ARM64
Drivers:
- Add queue stop/query debugfs support in hisilicon/qm
- Intel qat updates and cleanups"
* tag 'v6.9-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (79 commits)
Revert "crypto: remove CONFIG_CRYPTO_STATS"
crypto: scomp - remove memcpy if sg_nents is 1 and pages are lowmem
crypto: tcrypt - add ffdhe2048(dh) test
crypto: iaa - fix the missing CRYPTO_ALG_ASYNC in cra_flags
crypto: hisilicon/zip - fix the missing CRYPTO_ALG_ASYNC in cra_flags
hwrng: hisi - use dev_err_probe
MAINTAINERS: Remove T Ambarus from few mchp entries
crypto: iaa - Fix comp/decomp delay statistics
crypto: iaa - Fix async_disable descriptor leak
dt-bindings: rng: atmel,at91-trng: add sam9x7 TRNG
dt-bindings: crypto: add sam9x7 in Atmel TDES
dt-bindings: crypto: add sam9x7 in Atmel SHA
dt-bindings: crypto: add sam9x7 in Atmel AES
crypto: remove CONFIG_CRYPTO_STATS
crypto: dh - Make public key test FIPS-only
crypto: rockchip - fix to check return value
crypto: jitter - fix CRYPTO_JITTERENTROPY help text
crypto: qat - make ring to service map common for QAT GEN4
crypto: qat - fix ring to service map for dcc in 420xx
crypto: qat - fix ring to service map for dcc in 4xxx
...
|
|
Pull VFIO updates from Alex Williamson:
- Add warning in unlikely case that device is not captured with
driver_override (Kunwu Chan)
- Error handling improvements in mlx5-vfio-pci to detect firmware
tracking object error states, logging of firmware error syndrom, and
releasing of firmware resources in aborted migration sequence (Yishai
Hadas)
- Correct an un-alphabetized VFIO MAINTAINERS entry (Alex Williamson)
- Make the mdev_bus_type const and also make the class struct const for
a couple of the vfio-mdev sample drivers (Ricardo B. Marliere)
- Addition of a new vfio-pci variant driver for the GPU of NVIDIA's
Grace-Hopper superchip. During initialization of the chip-to-chip
interconnect in this hardware module, the PCI BARs of the device
become unused in favor of a faster, coherent mechanism for exposing
device memory. This driver primarily changes the VFIO representation
of the device to masquerade this coherent aperture to replace the
physical PCI BARs for userspace drivers. This also incorporates use
of a new vma flag allowing KVM to use write combining attributes for
uncached device memory (Ankit Agrawal)
- Reset fixes and cleanups for the pds-vfio-pci driver. Save and
restore files were previously leaked if the device didn't pass
through an error state, this is resolved and later re-fixed to
prevent access to the now freed files. Reset handling is also
refactored to remove the complicated deferred reset mechanism (Brett
Creeley)
- Remove some references to pl330 in the vfio-platform amba driver
(Geert Uytterhoeven)
- Remove twice redundant and ugly code to unpin incidental pins of the
zero-page (Alex Williamson)
- Deferred reset logic is also removed from the hisi-acc-vfio-pci
driver as a simplification (Shameer Kolothum)
- Enforce that mlx5-vfio-pci devices must support PRE_COPY and remove
resulting unnecessary code. There is no device firmware that has been
available publicly without this support (Yishai Hadas)
- Switch over to using the .remove_new callback for vfio-platform in
support of the broader transition for a void remove function (Uwe
Kleine-König)
- Resolve multiple issues in interrupt code for VFIO bus drivers that
allow calling eventfd_signal() on a NULL context. This also remove a
potential race in INTx setup on certain hardware for vfio-pci, races
with various mechanisms to mask INTx, and leaked virqfds in
vfio-platform (Alex Williamson)
* tag 'vfio-v6.9-rc1' of https://github.com/awilliam/linux-vfio: (29 commits)
vfio/fsl-mc: Block calling interrupt handler without trigger
vfio/platform: Create persistent IRQ handlers
vfio/platform: Disable virqfds on cleanup
vfio/pci: Create persistent INTx handler
vfio: Introduce interface to flush virqfd inject workqueue
vfio/pci: Lock external INTx masking ops
vfio/pci: Disable auto-enable of exclusive INTx IRQ
vfio/pds: Refactor/simplify reset logic
vfio/pds: Make sure migration file isn't accessed after reset
vfio/platform: Convert to platform remove callback returning void
vfio/mlx5: Enforce PRE_COPY support
vfio/mbochs: make mbochs_class constant
vfio/mdpy: make mdpy_class constant
hisi_acc_vfio_pci: Remove the deferred_reset logic
Revert "vfio/type1: Unpin zero pages"
vfio/nvgrace-gpu: Convey kvm to map device memory region as noncached
vfio: amba: Rename pl330_ids[] to vfio_amba_ids[]
vfio/pds: Always clear the save/restore FDs on reset
vfio/nvgrace-gpu: Add vfio pci variant module for grace hopper
vfio/pci: rename and export range_intersect_range
...
|
|
Pull kvm updates from Paolo Bonzini:
"S390:
- Changes to FPU handling came in via the main s390 pull request
- Only deliver to the guest the SCLP events that userspace has
requested
- More virtual vs physical address fixes (only a cleanup since
virtual and physical address spaces are currently the same)
- Fix selftests undefined behavior
x86:
- Fix a restriction that the guest can't program a PMU event whose
encoding matches an architectural event that isn't included in the
guest CPUID. The enumeration of an architectural event only says
that if a CPU supports an architectural event, then the event can
be programmed *using the architectural encoding*. The enumeration
does NOT say anything about the encoding when the CPU doesn't
report support the event *in general*. It might support it, and it
might support it using the same encoding that made it into the
architectural PMU spec
- Fix a variety of bugs in KVM's emulation of RDPMC (more details on
individual commits) and add a selftest to verify KVM correctly
emulates RDMPC, counter availability, and a variety of other
PMC-related behaviors that depend on guest CPUID and therefore are
easier to validate with selftests than with custom guests (aka
kvm-unit-tests)
- Zero out PMU state on AMD if the virtual PMU is disabled, it does
not cause any bug but it wastes time in various cases where KVM
would check if a PMC event needs to be synthesized
- Optimize triggering of emulated events, with a nice ~10%
performance improvement in VM-Exit microbenchmarks when a vPMU is
exposed to the guest
- Tighten the check for "PMI in guest" to reduce false positives if
an NMI arrives in the host while KVM is handling an IRQ VM-Exit
- Fix a bug where KVM would report stale/bogus exit qualification
information when exiting to userspace with an internal error exit
code
- Add a VMX flag in /proc/cpuinfo to report 5-level EPT support
- Rework TDP MMU root unload, free, and alloc to run with mmu_lock
held for read, e.g. to avoid serializing vCPUs when userspace
deletes a memslot
- Tear down TDP MMU page tables at 4KiB granularity (used to be
1GiB). KVM doesn't support yielding in the middle of processing a
zap, and 1GiB granularity resulted in multi-millisecond lags that
are quite impolite for CONFIG_PREEMPT kernels
- Allocate write-tracking metadata on-demand to avoid the memory
overhead when a kernel is built with i915 virtualization support
but the workloads use neither shadow paging nor i915 virtualization
- Explicitly initialize a variety of on-stack variables in the
emulator that triggered KMSAN false positives
- Fix the debugregs ABI for 32-bit KVM
- Rework the "force immediate exit" code so that vendor code
ultimately decides how and when to force the exit, which allowed
some optimization for both Intel and AMD
- Fix a long-standing bug where kvm_has_noapic_vcpu could be left
elevated if vCPU creation ultimately failed, causing extra
unnecessary work
- Cleanup the logic for checking if the currently loaded vCPU is
in-kernel
- Harden against underflowing the active mmu_notifier invalidation
count, so that "bad" invalidations (usually due to bugs elsehwere
in the kernel) are detected earlier and are less likely to hang the
kernel
x86 Xen emulation:
- Overlay pages can now be cached based on host virtual address,
instead of guest physical addresses. This removes the need to
reconfigure and invalidate the cache if the guest changes the gpa
but the underlying host virtual address remains the same
- When possible, use a single host TSC value when computing the
deadline for Xen timers in order to improve the accuracy of the
timer emulation
- Inject pending upcall events when the vCPU software-enables its
APIC to fix a bug where an upcall can be lost (and to follow Xen's
behavior)
- Fall back to the slow path instead of warning if "fast" IRQ
delivery of Xen events fails, e.g. if the guest has aliased xAPIC
IDs
RISC-V:
- Support exception and interrupt handling in selftests
- New self test for RISC-V architectural timer (Sstc extension)
- New extension support (Ztso, Zacas)
- Support userspace emulation of random number seed CSRs
ARM:
- Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
- Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
- Conversion of KVM's representation of LPIs to an xarray, utilized
to address serialization some of the serialization on the LPI
injection path
- Support for _architectural_ VHE-only systems, advertised through
the absence of FEAT_E2H0 in the CPU's ID register
- Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
LoongArch:
- Set reserved bits as zero in CPUCFG
- Start SW timer only when vcpu is blocking
- Do not restart SW timer when it is expired
- Remove unnecessary CSR register saving during enter guest
- Misc cleanups and fixes as usual
Generic:
- Clean up Kconfig by removing CONFIG_HAVE_KVM, which was basically
always true on all architectures except MIPS (where Kconfig
determines the available depending on CPU capabilities). It is
replaced either by an architecture-dependent symbol for MIPS, and
IS_ENABLED(CONFIG_KVM) everywhere else
- Factor common "select" statements in common code instead of
requiring each architecture to specify it
- Remove thoroughly obsolete APIs from the uapi headers
- Move architecture-dependent stuff to uapi/asm/kvm.h
- Always flush the async page fault workqueue when a work item is
being removed, especially during vCPU destruction, to ensure that
there are no workers running in KVM code when all references to
KVM-the-module are gone, i.e. to prevent a very unlikely
use-after-free if kvm.ko is unloaded
- Grab a reference to the VM's mm_struct in the async #PF worker
itself instead of gifting the worker a reference, so that there's
no need to remember to *conditionally* clean up after the worker
Selftests:
- Reduce boilerplate especially when utilize selftest TAP
infrastructure
- Add basic smoke tests for SEV and SEV-ES, along with a pile of
library support for handling private/encrypted/protected memory
- Fix benign bugs where tests neglect to close() guest_memfd files"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
selftests: kvm: remove meaningless assignments in Makefiles
KVM: riscv: selftests: Add Zacas extension to get-reg-list test
RISC-V: KVM: Allow Zacas extension for Guest/VM
KVM: riscv: selftests: Add Ztso extension to get-reg-list test
RISC-V: KVM: Allow Ztso extension for Guest/VM
RISC-V: KVM: Forward SEED CSR access to user space
KVM: riscv: selftests: Add sstc timer test
KVM: riscv: selftests: Change vcpu_has_ext to a common function
KVM: riscv: selftests: Add guest helper to get vcpu id
KVM: riscv: selftests: Add exception handling support
LoongArch: KVM: Remove unnecessary CSR register saving during enter guest
LoongArch: KVM: Do not restart SW timer when it is expired
LoongArch: KVM: Start SW timer only when vcpu is blocking
LoongArch: KVM: Set reserved bits as zero in CPUCFG
KVM: selftests: Explicitly close guest_memfd files in some gmem tests
KVM: x86/xen: fix recursive deadlock in timer injection
KVM: pfncache: simplify locking and make more self-contained
KVM: x86/xen: remove WARN_ON_ONCE() with false positives in evtchn delivery
KVM: x86/xen: inject vCPU upcall vector when local APIC is enabled
KVM: x86/xen: improve accuracy of Xen timers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc
Pull sparc updates from Andreas Larsson:
- Fix missing prototype warnings in various places, including switching
to using generic cmpdi2/ucmpdi2 and parport.h and stop selecting
unneeded GENERIC_ISA_DMA.
- Reduce duplicate code by using shared font data, with dependency
fixup in separate commit touching lib/fonts.
- Convert sbus drives to use remove callbacks returning void
- Fix return values of __setup handlers
- Section mismatch fix for grpci pci drivers
- Make the vio bus type constant
- Kconfig cleanups and fixes
- Typo fixes
* tag 'sparc-for-6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc:
lib/fonts: Allow Sparc console 8x16 font for sparc64 early boot text console
sbus: uctrl: Convert to platform remove callback returning void
sbus: flash: Convert to platform remove callback returning void
sbus: envctrl: Convert to platform remove callback returning void
sbus: display7seg: Convert to platform remove callback returning void
sbus: bbc_i2c: Convert to platform remove callback returning void
sbus: Add prototype for bbc_envctrl_init and bbc_envctrl_cleanup to header
sparc32: Fix section mismatch in leon_pci_grpci
sparc32: Fix parport build with sparc32
sparc32: Do not select GENERIC_ISA_DMA
mtd: maps: sun_uflash: Declare uflash_devinit static
sparc32: Fix build with trapbase
sparc32: Use generic cmpdi2/ucmpdi2 variants
sparc: select FRAME_POINTER instead of redefining it
sparc: vDSO: fix return value of __setup handler
sparc64: NMI watchdog: fix return value of __setup handler
sparc: vio: make vio_bus_type const
sparc: Fix typos
sparc: Use shared font data
sparc: remove obsolete config ARCH_ATU
|
|
Pull MIPS updates from Thomas Bogendoerfer:
- added support for Mobileye SoCs
- unified GPR/CP0 regs handling for uasm
- cleanups and fixes
* tag 'mips_6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (56 commits)
mips: cm: Convert __mips_cm_phys_base() to weak function
mips: cm: Convert __mips_cm_l2sync_phys_base() to weak function
mips: dts: ralink: mt7621: add cell count properties to usb
mips: dts: ralink: mt7621: add serial1 and serial2 nodes
mips: dts: ralink: mt7621: reorder serial0 properties
mips: dts: ralink: mt7621: associate uart1_pins with serial0
MIPS: ralink: Don't use "proxy" headers
mips: sibyte: make tb_class constant
mips: mt: make mt_class constant
MIPS: ralink: Remove unused of_gpio.h
bus: bt1-apb: Remove duplicate include
MAINTAINERS: remove entry to non-existing file in MOBILEYE MIPS SOCS
MIPS: mipsregs: Parse fp and sp register by name in parse_r
tty: mips_ejtag_fdc: Fix passing incompatible pointer type warning
mips: zboot: Fix "no previous prototype" build warning
MIPS: mipsregs: Set proper ISA level for virt extensions
MIPS: Implement microMIPS MT ASE helpers
MIPS: Limit MIPS_MT_SMP support by ISA reversion
MIPS: Loongson64: test for -march=loongson3a cflag
MIPS: BMIPS: Drop unnecessary assembler flag
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add cleanup.h based auto release of struct device_node pointers via
__free marking and new for_each_child_of_node_scoped() iterator to
use it.
- Always create a base skeleton DT when CONFIG_OF is enabled. This
supports several usecases of adding DT data on non-DT booted
systems.
- Move around some /reserved-memory code in preparation for further
improvements
- Add a stub for_each_property_of_node() for !OF
- Adjust the printk levels on some messages
- Fix __be32 sparse warning
- Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver
(currently orphaned)
- Add Saravana Kannan and drop Frank Rowand as DT maintainers
DT bindings:
- Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc,
fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and
xlnx,sd-fec to DT schemas
- Add existing, but undocumented fsl,imx-anatop binding
- Add bunch of undocumented vendor prefixes used in compatible
strings
- Drop obsolete brcm,bcm2835-pm-wdt binding
- Drop obsolete i2c.txt which as been replaced with schema in
dtschema
- Add DPS310 device and sort trivial-devices.yaml
- Enable undocumented compatible checks on DT binding examples
- More QCom maintainer fixes/updates
- Updates to writing-schema.rst and DT submitting-patches.rst to
cover some frequent review comments
- Clean-up SPDX tags to use 'OR' rather than 'or'"
* tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits)
dt-bindings: soc: imx: fsl,imx-anatop: add imx6q regulators
of: unittest: Use for_each_child_of_node_scoped()
of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling
of: Add cleanup.h based auto release via __free(device_node) markings
of: Move all FDT reserved-memory handling into of_reserved_mem.c
of: Add KUnit test to confirm DTB is loaded
of: unittest: treat missing of_root as error instead of fixing up
x86/of: Unconditionally call unflatten_and_copy_device_tree()
um: Unconditionally call unflatten_device_tree()
of: Create of_root if no dtb provided by firmware
of: Always unflatten in unflatten_and_copy_device_tree()
dt-bindings: timer: mediatek: Convert to json-schema
dt-bindings: interrupt-controller: fsl,intmux: Include power-domains support
soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE usage
dt-bindings: fsl-imx-sdma: fix HDMI audio index
dt-bindings: soc: imx: fsl,imx-iomuxc-gpr: add imx6
dt-bindings: soc: imx: fsl,imx-anatop: add binding
dt-bindings: input: touchscreen: fsl,imx6ul-tsc convert to YAML
dt-bindings: pinctrl: fsl,imx6ul-pinctrl: convert to YAML
of: make for_each_property_of_node() available to to !OF
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD:
- The Carillo Ranch driver has been removed
- Top level mtd bindings have received a couple of improvements
(references, selects)
- The ssfdc driver received few minor adjustments
- The usual load of misc/small improvements and fixes
Raw NAND:
- The main series brought is an update of the Broadcom support to
support all BCMBCA SoCs and their specificity (ECC, write
protection, configuration straps), plus a few misc fixes and
changes in the main driver. Device tree updates are also part of
this PR, initially because of a misunderstanding on my side.
- The STM32_FMC2 controller driver is also upgraded to properly
support MP1 and MP25 SoCs.
- A new compatible is added for an Atmel flavor.
- Among all these feature changes, there is as well a load of
continuous read related fixes, avoiding more corner conditions and
clarifying the logic. Finally a few miscellaneous fixes are made to
the core, the lpx32xx_mlc, fsl_lbc, Meson and Atmel controller
driver, as well as final one in the Hynix vendor driver.
SPI-NAND:
- The ESMT support has been extended to match 5 bytes ID to avoid
collisions. Winbond support on its side receives support for
W25N04KV chips.
SPI NOR:
- SPI NOR gets the non uniform erase code cleaned. We stopped using
bitmasks for erase types and flags, and instead introduced
dedicated members. We then passed the SPI NOR erase map to MTD.
Users can now determine the erase regions and make informed
decisions on partitions size.
- An optional interrupt property is now described in the bindings"
* tag 'mtd/for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (50 commits)
mtd: rawnand: Ensure continuous reads are well disabled
mtd: rawnand: Constrain even more when continuous reads are enabled
mtd: rawnand: brcmnand: Add support for getting ecc setting from strap
mtd: rawnand: brcmnand: fix sparse warnings
mtd: nand: raw: atmel: Fix comment in timings preparation
mtd: rawnand: Ensure all continuous terms are always in sync
mtd: rawnand: Add a helper for calculating a page index
mtd: rawnand: Fix and simplify again the continuous read derivations
mtd: rawnand: hynix: remove @nand_technology kernel-doc description
dt-bindings: atmel-nand: add microchip,sam9x7-pmecc
mtd: rawnand: brcmnand: Support write protection setting from dts
mtd: rawnand: brcmnand: Add BCMBCA read data bus interface
mtd: rawnand: brcmnand: Rename bcm63138 nand driver
arm64: dts: broadcom: bcmbca: Update router boards
arm64: dts: broadcom: bcmbca: Add NAND controller node
ARM: dts: broadcom: bcmbca: Add NAND controller node
mtd: spi-nor: core: correct type of i
mtd: spi-nor: core: set mtd->eraseregions for non-uniform erase map
mtd: spi-nor: core: get rid of SNOR_OVERLAID_REGION flag
mtd: spi-nor: core: get rid of SNOR_LAST_REGION flag
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New hardware support:
- Allwinner H616 dma support
- Renesas r8a779h0 dma controller support
- TI CSI2RX dma support
Updates:
- Freescale edma driver updates for TCD64csupport for i.MX95
- constify of pointers and args
- Yaml conversion for MediaTek High-Speed controller binding
- TI k3 udma support for TX/RX DMA channels for thread IDs:
* tag 'dmaengine-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (25 commits)
dmaengine: of: constify of_phandle_args in of_dma_find_controller()
dmaengine: pl08x: constify pointer to char in filter function
MAINTAINERS: change in AMD ptdma maintainer
MAINTAINERS: adjust file entry in MEDIATEK DMA DRIVER
dmaengine: idxd: constify the struct device_type usage
dt-bindings: renesas,rcar-dmac: Add r8a779h0 support
dt-bindings: dma: convert MediaTek High-Speed controller to the json-schema
dmaengine: idxd: make dsa_bus_type const
dmaengine: fsl-edma: integrate TCD64 support for i.MX95
dt-bindings: fsl-dma: fsl-edma: add fsl,imx95-edma5 compatible string
dmaengine: mcf-edma: utilize edma_write_tcdreg() macro for TCD Access
dmaengine: fsl-edma: add address for channel mux register in fsl_edma_chan
dmaengine: fsl-edma: fix spare build warning
dmaengine: fsl-edma: involve help macro fsl_edma_set(get)_tcd()
dt-bindings: mmp-dma: convert to YAML
dmaengine: ti: k3-psil-j721s2: Add entry for CSI2RX
dmaengine: ti: k3-udma-glue: Add function to request RX chan for thread ID
dmaengine: ti: k3-udma-glue: Add function to request TX chan for thread ID
dmaengine: ti: k3-udma-glue: Update name for remote RX channel device
dmaengine: ti: k3-udma-glue: Add function to parse channel by ID
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Constify sdw_bus and sdw_master_type objects
- use of rtd helper for better code
- intel aux device remove redundant assignment
* tag 'soundwire-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: Use snd_soc_substream_to_rtd() to obtain rtd
soundwire: constify the struct device_type usage
soundwire: bus_type: make sdw_bus_type const
soundwire: intel_auxdevice: remove redundant assignment to variable link_flags
soundwire: stream: add missing const to Documentation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Minor changes to the I2C core. Most changes are in drivers:
The i801 and designware drivers received most of the changes,
including refactorings and some additions.
Recovery changes for the iMX and iMX-LPI2C are now utilizing the
generic i2c support.
The Cadence driver now supports system suspend and resume.
The hisi, mpc, sh_mobile, and npcm drivers have undergone some
cleanups and improvements. Meanwhile, Uwe continues his work on
converting the "remove" callback to become a void function.
The pca954x mux driver now supports additional configurations, such as
isolating faulty channels and flushing stuck buses, among others.
Support has been added for Renesas r8a779h0, i.MX95 LPI2C, and
Microchip sam9x7. Meanwhile, Geert lays the groundwork for the
upcoming R-Car Gen4"
* tag 'i2c-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits)
i2c: sprd: Convert to platform remove callback returning void
Documentation: i2c: Document that client auto-detection is a legacy mechanism
i2c: remove redundant condition
i2c: rcar: Prepare for the advent of ARCH_RCAR_GEN4
i2c: imx-lpi2c: add generic GPIO recovery for LPI2C
i2c: cadence: Add system suspend and resume PM support
i2c: mpc: remove outdated macro
i2c: mpc: use proper binding for transfer timeouts
dt-bindings: i2c: mpc: use proper binding for transfer timeouts
i2c: smbus: Prepare i2c_register_spd for usage on muxed segments
i2c: constify the struct device_type usage
i2c: designware: Implement generic polling mode code for Wangxun 10Gb NIC
i2c: designware: Fix RX FIFO depth define on Wangxun 10Gb NIC
i2c: designware: Move interrupt handling functions before i2c_dw_xfer()
i2c: designware: Use accessors to DW_IC_INTR_MASK register
i2c: designware: Do not enable interrupts shortly in polling mode
i2c: designware: Uniform initialization flow for polling mode
dt-bindings: i2c: at91: Add sam9x7 compatible string
dt-bindings: i2c: imx-lpi2c: add i.MX95 LPI2C
i2c: Remove redundant comparison in npcm_i2c_reg_slave
...
|
|
Add Snakebyte GAMEPAD BASE X and Snakebyte GAMEPAD RGB X to the list
of supported devices.
Signed-off-by: Matt Scialabba <matt.git@fastmail.fm>
Link: https://lore.kernel.org/r/efbfb428-06b0-48f9-8701-db291c2a9d65@app.fastmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dave Jiang:
- ACPI_NFIT Kconfig documetation fix
- Make nvdimm_bus_type const
- Make dax_bus_type const
- remove SLAB_MEM_SPREAD flag usage in DAX
* tag 'libnvdimm-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: remove SLAB_MEM_SPREAD flag usage
device-dax: make dax_bus_type const
nvdimm: make nvdimm_bus_type const
libnvdimm: Fix ACPI_NFIT in BLK_DEV_PMEM help
|
|
Convert Samsung SoC Keypad bindings to DT schema with changes:
1. Rename "linux,keypad-no-autorepeat" property to
"linux,input-no-autorepeat", because the latter was implemented in
the Linux driver.
2. Add clocks and clock-names, already used by DTS and the Linux driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240312183001.714626-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Not a ton of stuff happening in the clk framework. We got some more
devm helpers and we seem to be going in the direction of "just turn
this stuff on already and leave me alone!" with the addition of a
devm_clk_bulk_get_all_enable() API. I'm hoping that we can make that
into a pmdomain that drivers attach instead, but this API should help
drivers simplify in the meantime.
Outside of the devm wrappers, we've got the usual clk driver updates
that are dominated by the major phone SoC vendors (Samsung and
Qualcomm) and the non-critical driver fixes for things like incorrect
topology descriptions and wrong registers or bit fields. More details
are below, but I'd say that it looks pretty ordinary. The only thing
that really jumps out at me is the Renesas clk driver that's ignoring
clks that are assigned to remote processors in DeviceTree. That's a
new feature that they're using to avoid marking clks as
CLK_IGNORE_UNUSED based on the configuration of the system.
Core:
- Increase dev_id len for clkdev lookups
- Add a devm_clk_bulk_get_all_enable() API to get and enable all clks
for a device
- Add a devm variant of clk_rate_exclusive_get()
New Drivers:
- Display, TCSR, GPU, and Camera clock controllers for Qualcomm's X1
Elite SoC
- Google GS101 PERIC0 and PERIC1 clock controllers
- Exynos850 PDMA clocks
- Exynos850 CPU cluster 0 and 1 (CMU_CPUCLK0/CMU_CPUCLK1) clock
controllers
Removed Drivers:
- Remove the unused Qualcomm sc7180 modem clk driver
Updates:
- Fix some static checker errors in the Hisilicon clk driver
- Polarfire MSSPLL hardware has 4 output clocks (the driver supported
previously only one output); each of these 4 outputs feed dividers
and the output of each divider feed individual hardware blocks
(e.g. CAN, Crypto, eMMC); individual hardware block drivers need to
control their clocks thus clock driver support was added for all
MSSPLL output clocks
- Typo fixes in the Qualcomm IPQ5018 GCC driver
- Add "qdss_at" clk on Qualcomm IPQ6018, needed for WiFi
- Properly terminate frequency tables in different Qualcomm clk
drivers
- Add MDSS, crypto, and SDCC resets on Qualcomm MSM8953
- Add missing UFS CLKREF clks on Qualcomm SC8180X
- Avoid significant delays during boot by adding a softdep on rpmhpd
to Qualcomm SDM845 gcc driver
- Add QUPv3 RCGS w/ DFS and video resets to Qualcomm SM8150 GCC
driver
- Fix the custom GPU GX "do-nothing" method in the Qualcomm GDSC
driver
- Add an external regulator to GX GDSC on Qualcomm SC8280XP GPU clk
driver
- Switch display, GPU, video, and camera Qualcomm clk drivers to
module_platform_driver()
- Set a longer delay for Venus resets on many Qualcomm SoCs
- Correct the GDSC wait times in the Qualcomm SDM845 display clk
driver
- Fix clock listing Oops on Amlogic axg
- New pll-rate for Rockchip rk3568
- i2s rate improvements for Rockchip rk3399
- Rockchip rk3588 syscon clock fixes and removal of overall
clock-number from the rk3588 binding header
- A prerequisite for later improvements to the Rockchip rk3588 linked
clocks
- Minor clean-ups and error handling improvements in both
composite-8m and SCU i.MX clock drivers
- Fix for SAI_MCLK_SEL definition for i.MX8MP
- Register the Samsung CMU MISC clock controller earlier, so the
Multi Core Timer clocksource can use it on Google GS101
- Propagate Exynos850 SPI IPCLK rate change to parents, so the SPI
will get proper clock rates
- Refactor the generic Samsung CPU clock controllers code, preparing
it for supporting Exynos850 CPU clocks
- Fix some clk kerneldoc warnings
- Add Ethernet, SDHI, DMA, and HyperFLASH/QSPI (RPC-IF) clocks on
Renesas R-Car V4M
- Ignore all clocks which are assigned to a non-Linux system in the
Renesas clk driver
- Add watchdog clock on Renesas RZ/G3S
- Add camera (CRU) clock and reset on Renesas RZ/G2UL
- Add support for the Renesas R-Car V4M (R8A779H0) SoC
- Convert some clk bindings to YAML so they can be validated"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits)
clk: zynq: Prevent null pointer dereference caused by kmalloc failure
clk: fractional-divider: Use bit operations consistently
clk: fractional-divider: Move mask calculations out of lock
clk: Fix clk_core_get NULL dereference
clk: starfive: jh7110-vout: Convert to platform remove callback returning void
clk: starfive: jh7110-isp: Convert to platform remove callback returning void
clk: imx: imx8-acm: Convert to platform remove callback returning void
clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset
clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk'
clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk'
clk: qcom: camcc-x1e80100: Fix missing DT_IFACE enum in x1e80100 camcc
clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays
clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays
clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays
clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays
clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays
clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays
clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays
clk: mediatek: clk-mt8173-apmixedsys: Use common error handling code in clk_mt8173_apmixed_probe()
clk: Add a devm variant of clk_rate_exclusive_get()
...
|
|
The EFI stub on x86 no longer invokes the decompressor as a subsequent
boot stage, but calls into the decompression code directly while running
in the context of the EFI boot services.
This means that when using the native EFI entrypoint (as opposed to the
EFI handover protocol, which clears BSS explicitly), the firmware PE
image loader is being relied upon to ensure that BSS is zeroed before
the EFI stub is entered from the firmware.
As Radek's report proves, this is a bad idea. Not all loaders do this
correctly, which means some global variables that should be statically
initialized to 0x0 may have junk in them.
So clear BSS explicitly when entering via efi_pe_entry(). Note that
zeroing BSS from C code is not generally safe, but in this case, the
following assignment and dereference of a global pointer variable
ensures that the memset() cannot be deferred or reordered.
Cc: <stable@kernel.org> # v6.1+
Reported-by: Radek Podgorny <radek@podgorny.cz>
Closes: https://lore.kernel.org/all/a99a831a-8ad5-4cb0-bff9-be637311f771@podgorny.cz
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- DVB budget legacy API was finally documented. It took only 20+ years
to get some documentation about it...
- hantro driver has gained support for STM32MP25 VDEC/VENC
- rkisp1 has gained support for i.MX8MP
- atomisp got rid of two items from its todo list. Still 5 items
pending for moving it out of staging
- lots of driver fixes, cleanups and improvements
* tag 'media/v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (252 commits)
media: rcar-isp: Disallow unbind of devices
media: usbtv: Remove useless locks in usbtv_video_free()
media: mediatek: vcodec: avoid -Wcast-function-type-strict warning
media: ttpci: fix two memleaks in budget_av_attach
media: go7007: fix a memleak in go7007_load_encoder
media: dvb-frontends: avoid stack overflow warnings with clang
media: pvrusb2: fix uaf in pvr2_context_set_notify
media: usb: s2255: Refactor s2255_get_fx2fw
media: ti: j721e-csi2rx: Convert to platform remove callback returning void
media: stm32-dcmipp: Convert to platform remove callback returning void
media: nxp: imx8-isi: Convert to platform remove callback returning void
media: nuvoton: Convert to platform remove callback returning void
media: chips-media: wave5: Convert to platform remove callback returning void
media: chips-media: wave5: Remove unnecessary semicolons
media: i2c: imx290: Fix IMX920 typo
media: platform: replace of_graph_get_next_endpoint()
media: i2c: replace of_graph_get_next_endpoint()
media: ivsc: csi: Make use of sub-device state
media: ivsc: csi: Swap SINK and SOURCE pads
media: ipu-bridge: Serialise calls to IPU bridge init
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
Pull 9p updates from Eric Van Hensbergen:
"This includes a number of patches addressing improvements in the cache
portions of the 9p client.
The biggest improvements have to do with fixing handling of inodes and
eliminating duplicate structures and unnecessary allocation/release of
inode structures and many associated unnecessary protocol traffic.
This also dramatically reduced code complexity across the code and
sets us up to add proper temporal cache capabilities"
* tag '9p-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
fs/9p: fix dups even in uncached mode
fs/9p: simplify iget to remove unnecessary paths
fs/9p: rework qid2ino logic
fs/9p: Eliminate now unused v9fs_get_inode
fs/9p: Eliminate redundant non-cache path in mknod
fs/9p: remove walk and inode allocation from symlink
fs/9p: convert mkdir to use get_new_inode
fs/9p: switch vfsmount to use v9fs_get_new_inode
|
|
imx6q has additional regulators compared to imx6ul. Add them to the list
of allowed patterns.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240314145953.2957313-1-alexander.stein@ew.tq-group.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Add passthrough mode for regular file I/O.
This allows performing read and write (also via memory maps) on a
backing file without incurring the overhead of roundtrips to
userspace. For now this is only allowed to privileged servers, but
this limitation will go away in the future (Amir Goldstein)
- Fix interaction of direct I/O mode with memory maps (Bernd Schubert)
- Export filesystem tags through sysfs for virtiofs (Stefan Hajnoczi)
- Allow resending queued requests for server crash recovery (Zhao Chen)
- Misc fixes and cleanups
* tag 'fuse-update-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (38 commits)
fuse: get rid of ff->readdir.lock
fuse: remove unneeded lock which protecting update of congestion_threshold
fuse: Fix missing FOLL_PIN for direct-io
fuse: remove an unnecessary if statement
fuse: Track process write operations in both direct and writethrough modes
fuse: Use the high bit of request ID for indicating resend requests
fuse: Introduce a new notification type for resend pending requests
fuse: add support for explicit export disabling
fuse: __kuid_val/__kgid_val helpers in fuse_fill_attr_from_inode()
fuse: fix typo for fuse_permission comment
fuse: Convert fuse_writepage_locked to take a folio
fuse: Remove fuse_writepage
virtio_fs: remove duplicate check if queue is broken
fuse: use FUSE_ROOT_ID in fuse_get_root_inode()
fuse: don't unhash root
fuse: fix root lookup with nonzero generation
fuse: replace remaining make_bad_inode() with fuse_make_bad()
virtiofs: drop __exit from virtio_fs_sysfs_exit()
fuse: implement passthrough for mmap
fuse: implement splice read/write passthrough
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Ext4 bug fixes and cleanups, plus some additional kunit tests"
* tag 'ext4_for_linus-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
ext4: initialize sbi->s_freeclusters_counter and sbi->s_dirtyclusters_counter before use in kunit test
ext4: hold group lock in ext4 kunit test
ext4: alloc test super block from sget
ext4: kunit: use dynamic inode allocation
ext4: enable meta_bg only when new desc blocks are needed
ext4: remove unused parameter biop in ext4_issue_discard()
ext4: remove SLAB_MEM_SPREAD flag usage
ext4: verify s_clusters_per_group even without bigalloc
ext4: fix corruption during on-line resize
ext4: don't report EOPNOTSUPP errors from discard
ext4: drop duplicate ea_inode handling in ext4_xattr_block_set()
ext4: fold quota accounting into ext4_xattr_inode_lookup_create()
ext4: correct best extent lstart adjustment logic
ext4: forbid commit inconsistent quota data when errors=remount-ro
ext4: add a hint for block bitmap corrupt state in mb_groups
ext4: fix the comment of ext4_map_blocks()/ext4_ext_map_blocks()
ext4: improve error msg for ext4_mb_seq_groups_show
ext4: remove unused buddy_loaded in ext4_mb_seq_groups_show
ext4: Add unit test for ext4_mb_mark_diskspace_used
ext4: Add unit test for mb_free_blocks
...
|
|
Pull bcachefs updates from Kent Overstreet:
- Subvolume children btree; this is needed for providing a userspace
interface for walking subvolumes, which will come later
- Lots of improvements to directory structure checking
- Improved journal pipelining, significantly improving performance on
high iodepth write workloads
- Discard path improvements: the discard path is more efficient, and no
longer flushes the journal unnecessarily
- Buffered write path can now avoid taking the inode lock
- new mm helper: memalloc_flags_{save|restore}
- mempool now does kvmalloc mempools
* tag 'bcachefs-2024-03-13' of https://evilpiepirate.org/git/bcachefs: (128 commits)
bcachefs: time_stats: shrink time_stat_buffer for better alignment
bcachefs: time_stats: split stats-with-quantiles into a separate structure
bcachefs: mean_and_variance: put struct mean_and_variance_weighted on a diet
bcachefs: time_stats: add larger units
bcachefs: pull out time_stats.[ch]
bcachefs: reconstruct_alloc cleanup
bcachefs: fix bch_folio_sector padding
bcachefs: Fix btree key cache coherency during replay
bcachefs: Always flush write buffer in delete_dead_inodes()
bcachefs: Fix order of gc_done passes
bcachefs: fix deletion of indirect extents in btree_gc
bcachefs: Prefer struct_size over open coded arithmetic
bcachefs: Kill unused flags argument to btree_split()
bcachefs: Check for writing superblocks with nonsense member seq fields
bcachefs: fix bch2_journal_buf_to_text()
lib/generic-radix-tree.c: Make nodes more reasonably sized
bcachefs: copy_(to|from)_user_errcode()
bcachefs: Split out bkey_types.h
bcachefs: fix lost journal buf wakeup due to improved pipelining
bcachefs: intercept mountoption value for bool type
...
|
|
riscv_intc_custom_base is initialized to BITS_PER_LONG, so the second
check passes even though AIA provides 64 interrupts. Adjust the condition to
only check the custom range for interrupts outside the standard range, and
adjust the standard range when AIA is available.
Fixes: 3c46fc5b5507 ("irqchip/riscv-intc: Add support for RISC-V AIA")
Fixes: 678c607ecf8a ("irqchip/riscv-intc: Fix low-level interrupt handler setup for AIA")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240312212813.2323841-1-samuel.holland@sifive.com
|
|
Raw NAND
The main series brought is an update of the Broadcom support to support
all BCMBCA SoCs and their specificity (ECC, write protection,
configuration straps), plus a few misc fixes and changes in the main
driver. Device tree updates are also part of this PR, initially because
of a misunderstanding on my side.
The STM32_FMC2 controller driver is also upgraded to properly support
MP1 and MP25 SoCs.
A new compatible is added for an Atmel flavor.
Among all these feature changes, there is as well a load of continuous
read related fixes, avoiding more corner conditions and clarifying the
logic. Finally a few miscellaneous fixes are made to the core, the
lpx32xx_mlc, fsl_lbc, Meson and Atmel controller driver, as well as
final one in the Hynix vendor driver.
SPI-NAND
The ESMT support has been extended to match 5 bytes ID to avoid
collisions. Winbond support on its side receives support for W25N04KV
chips.
|
|
$(shell ...) expands to the output of the command. It expands to the
empty string when the command does not print anything to stdout.
Hence, $(shell mkdir ...) is sufficient and does not need any
variable assignment in front of it.
Commit c2bd08ba20a5 ("treewide: remove meaningless assignments in
Makefiles", 2024-02-23) did this to all of tools/ but ignored in-flight
changes to tools/testing/selftests/kvm/Makefile, so reapply the change.
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The conversion to guard macro dropped the irq-disablement at closing
mistakenly, which may lead to a race. Fix it.
Fixes: beb45974dd49 ("ALSA: timer: Use guard() for locking")
Reported-by: syzbot+28c1a5a5b041a754b947@syzkaller.appspotmail.com
Closes: http://lore.kernel.org/r/0000000000000b9a510613b0145f@google.com
Message-ID: <20240315101447.18395-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
