summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-03-10ice: Improve clarity of prints and variablesBrett Creeley3-125/+145
Currently when the device runs out of MSI-X interrupts a cryptic and unhelpful message is printed. This will cause confusion when hitting this case. Fix this by clearing up the error message for both SR-IOV and non SR-IOV use cases. Also, make a few minor changes to increase clarity of variables. 1. Change per VF MSI-X and queue pair variables in the PF structure. 2. Use ICE_NONQ_VECS_VF when determining pf->num_msix_per_vf instead of the magic number "1". This vector is reserved for the OICR. All of the resource tracking functions were moved to avoid adding any forward declaration function prototypes. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-03-10ice: allow bigger VFsMitch Williams4-158/+146
Unlike the XL710 series, 800-series hardware can allocate more than 4 MSI-X vectors per VF. This patch enables that functionality. We dynamically allocate vectors and queues depending on how many VFs are enabled. Allocating the maximum number of VFs replicates XL710 behavior with 4 queues and 4 vectors. But allocating a smaller number of VFs will give you 16 queues and 16 vectors. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-03-10iavf: Enable support for up to 16 queuesMitch Williams4-40/+11
Previous devices could only allocate 4 MSI-X vectors per VF so there was a limitation of 4 queues. 800-series hardware can allocate more than 4 MSI-X vectors, so expand the limitation on the number of queues that the driver can support to account for these capabilities. Fix ethtool channel operations to accommodate this change and adjust the reporting of max number of queues to what is given to us by the PF. Since we're not requesting queues above this value, just trigger reset to activate the queues, which we already own. Finally, fix a test condition that would display an incorrect error message. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-03-10ice: Cleanup unneeded parenthesisJeff Kirsher1-2/+2
Sergei Shtylyov pointed out that two instances of parenthesis are not needed, so remove them. Suggested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
2020-03-10Merge tag 'mlx5-updates-2020-03-09' of ↵David S. Miller17-185/+338
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2020-03-09 This series provides updates to mlx5 driver: 1) Use vport metadata matching only when mandatory 2) Introduce root flow table and ethtool steering for uplink representors 3) Expose port speed via FW when link modes are not available 3) Misc cleanups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10Merge branch 'hns3-next'David S. Miller5-60/+75
Huazhong Tan says: ==================== net: hns3: misc updates for -net-next This series includes some misc updates for the HNS3 ethernet driver. [patch 1] fixes some mixed type operation warning. [patch 2] renames a macro to make it more readable. [patch 3 & 4] removes some unnecessary code. [patch 5] adds check before assert VF reset to prevent some unsuitable error log. [patch 6 - 9] some modifications related to printing. Change log: V1->V2: fixes a wrong print format in [patch 1] suggested by Jian Shen. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10net: hns3: delete unnecessary logs after kzalloc failsYufeng Mo1-7/+2
Since kernel already has logs after kzalloc fails, it's unnecessary to print duplicate logs. So this patch deletes these logs. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10net: hns3: synchronize some print relating to reset issueHuazhong Tan2-6/+6
This patch modifies some printing relating to reset issue. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10net: hns3: print out command code when dump fails in debugfsYufeng Mo1-22/+34
This patch adds a local variable to save the command code in some dump cases which need to modify the command code, then the failing command code can be print out for debugging. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10net: hns3: print out status register when VF receives unknown source interruptHuazhong Tan1-1/+4
When received an unknown vector 0 interrupt, there is not a helpful information for user to realize that now. So this patch prints out the value of the status register for this case, and uses dev_info() instead of dev_dbg() in hclge_check_event_cause(). Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10net: hns3: add a check before PF inform VF to resetYonglong Liu1-4/+10
When setting VF's MAC from PF, if the VF driver not loaded, the firmware will return error to PF. So PF should check whether VF is alive before sending message to VF when setting VF's MAC. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10net: hns3: delete some reduandant codeGuojia Liao1-2/+0
In hclge_add_mc_addr_common() and hclge_rm_mc_addr_common(), variable req had been set as "0" by memset(), so it's unnecessary to set .entry_type field as "0" with hnae3_set_bit() again. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10net: hns3: remove an unnecessary resetting check in hclge_handle_hw_ras_error()Yufeng Mo1-3/+0
In hclge_handle_hw_ras_error(), it is unnecessary to check HCLGE_STATE_RST_HANDLING flag, because the reset priority has been ensured by the process itself. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10net: hns3: rename macro HCLGE_MAX_NCL_CONFIG_LENGTHYufeng Mo1-3/+3
The name of macro HCLGE_MAX_NCL_CONFIG_LENGTH is inaccurate, this patch renames it to HCLGE_NCL_CONFIG_LENGTH_IN_EACH_CMD. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10net: hns3: fix some mixed type assignmentGuojia Liao2-12/+16
This patch cleans up some incorrect type in assignment reported by sparse and compiler. The warning as below: - warning : restricted __le16 degrades to integer - warning : cast from restricted __le32 - warning : cast from restricted __be32 - warning : cast from restricted __be16 and "mixed operation". Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10Merge branch 'ionic-updates'David S. Miller10-83/+110
Shannon Nelson says: ==================== ionic updates This is a set of small updates for the Pensando ionic driver, some from internal work, some a result of mailing list discussions. v4 - don't register mgmt device netdev v3 - changed __attribute__(packed)) to __packed v2 - removed print from ionic_init_module() ==================== Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10ionic: drop ethtool driver versionShannon Nelson3-6/+2
Use the default kernel version in ethtool drv_info output and drop the module version. Cc: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10ionic: add support for device id 0x1004Shannon Nelson4-2/+19
Add support for the management port device id. This is to capture the device and set it up for devlink use, but not set it up for network operations. We still use a netdev object in order to use the napi infrasucture for processing adminq and notifyq messages, we just don't register the netdev. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10ionic: print pci bus lane infoShannon Nelson1-0/+1
Print the PCI bus lane information so people can keep an eye out for poor configurations that might not support the advertised speed. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10ionic: support ethtool rxhash disableShannon Nelson1-2/+9
We can disable rxhashing by setting rss_types to 0. The user can toggle this with "ethtool -K <ethX> rxhash off|on", which calls into the .ndo_set_features callback with the NETIF_F_RXHASH feature bit set or cleared. This patch adds a check for that bit and updates the FW if necessary. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10ionic: clean up bitflag usageShannon Nelson5-46/+41
Remove the unused flags field and and fix the bitflag names to include the _F_ flag hint. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10ionic: improve irq numa localityShannon Nelson1-2/+3
Spreading the interrupts across the CPU cores is good for load balancing, but not necessarily as good when using a CPU/core that is not part of the NUMA local CPU. If it can be localized, the kernel's cpumask_local_spread() service will pick a core that is on the node close to the PCI device. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10ionic: remove pragma packedShannon Nelson1-21/+17
Replace the misguided "#pragma packed" with tags on each struct/union definition that actually needs it. This is safer and more efficient on the various compilers and architectures. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10ionic: keep ionic dev on lif init failShannon Nelson2-5/+19
If the basic ionic interface works but the lif creation fails, don't fail the probe. This will allow us to use the driver to help inspect the hw/fw/pci interface for debugging purposes. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10Merge branch 'mptcp-don-t-auto-adjust-rcvbuf-size-if-locked'David S. Miller3-19/+60
Florian Westphal says: ==================== mptcp: don't auto-adjust rcvbuf size if locked The mptcp receive buffer is auto-sized based on the subflow receive buffer. Don't do this if userspace specfied a value via SO_RCVBUF setsockopt. Also update selftest program to provide a new option to set a fixed size. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10mptcp: don't grow mptcp socket receive buffer when rcvbuf is lockedFlorian Westphal1-4/+6
The mptcp rcvbuf size is adjusted according to the subflow rcvbuf size. This should not be done if userspace did set a fixed value. Fixes: 600911ff5f72bae ("mptcp: add rmem queue accounting") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10mptcp: selftests: add rcvbuf set optionFlorian Westphal2-15/+54
allows to run the tests with fixed receive buffer by passing "-R <value>" to mptcp_connect.sh. While at it, add a default 10 second poll timeout so the "-t" becomes optional -- this makes mptcp_connect simpler to use during manual testing. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10net: dsa: mt7530: add support for port mirroringDENG Qingfang2-0/+67
Add support for configuring port mirroring through the cls_matchall classifier. We do a full ingress and/or egress capture towards a capture port. MT7530 supports one monitor port and multiple mirrored ports. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10Merge tag 'batadv-next-for-davem-20200306' of ↵David S. Miller3-6/+6
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - Avoid RCU list-traversal in spinlock, by Sven Eckelmann - Replace zero-length array with flexible-array member, by Gustavo A. R. Silva ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10Merge branch 'r8169-series-with-improvements-to-rtl_tx'David S. Miller1-30/+16
Heiner Kallweit says: ==================== r8169: series with improvements to rtl_tx This series includes few improvements to rtl_tx(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10r8169: remove now unneeded barrier in rtl_txHeiner Kallweit1-6/+0
Until ae84bc187337 ("r8169: don't use bit LastFrag in tx descriptor after send") we used to access another bit in the descriptor, therefore it seems the barrier was needed. Since this commit DescOwn is the only bit we're interested in, so the barrier isn't needed any longer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10r8169: simplify usage of rtl8169_unmap_tx_skbHeiner Kallweit1-11/+10
Simplify the parameters taken by rtl8169_unmap_tx_skb, this makes usage of this function easier to read and understand. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10r8169: ensure tx_skb is fully reset after calling rtl8169_unmap_tx_skbHeiner Kallweit1-12/+7
So far tx_skb->skb is the only member of the two structs that is not reset. Make understanding the code easier by resetting both structs completely in rtl8169_unmap_tx_skb. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10r8169: convert while to for loop in rtl_txHeiner Kallweit1-3/+1
Slightly improve the code by converting this while to a for loop. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10Merge branch 's390-qeth-next'David S. Miller3-30/+15
Julian Wiedmann says: ==================== s390/qeth: updates 2020-03-06 please apply the following patch series for qeth to netdev's net-next tree. Just a small update to take care of a regression wrt to IRQ handling in net-next, reported by Qian Cai. The fix needs some qdio layer changes, so you will find Vasily's Acked-by in that patch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10s390/qeth: remove VNICC callback parameter structJulian Wiedmann1-25/+4
After recent cleanups this is just a complicated wrapper around an u32*. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10s390/qdio: add tighter controls for IRQ pollingJulian Wiedmann2-5/+11
Once the call to qdio_establish() has completed, qdio is free to deliver data IRQs to the device driver's IRQ poll handler. For qeth (the only qdio driver that currently uses IRQ polling) this is problematic, since the IRQs can arrive before its NAPI instance is even registered. Calling napi_schedule() from qeth_qdio_start_poll() then crashes in various nasty ways. Until recently qeth checked for IFF_UP to drop such early interrupts, but that's fragile as well since it doesn't enforce any ordering. Fix this properly by bringing up the qdio device in IRQS_DISABLED mode, and have the driver explicitly opt-in to receive data IRQs. qeth does so from qeth_open(), which kick-starts a NAPI poll and then calls qdio_start_irq() from qeth_poll(). Also add a matching qdio_stop_irq() in qeth_stop() to switch the qdio dataplane back into a disabled state. Fixes: 3d35dbe6224e ("s390/qeth: don't check for IFF_UP when scheduling napi") CC: Qian Cai <cai@lca.pw> Reported-by: Qian Cai <cai@lca.pw> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10net: sched: pie: change tc_pie_xstats->probLeslie Monis1-1/+1
Commit 105e808c1da2 ("pie: remove pie_vars->accu_prob_overflows") changes the scale of probability values in PIE from (2^64 - 1) to (2^56 - 1). This affects the precision of tc_pie_xstats->prob in user space. This patch ensures user space is unaffected. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10tcp: add bytes not sent to SCM_TIMESTAMPING_OPT_STATSYousuk Seung2-0/+4
Add TCP_NLA_BYTES_NOTSENT to SCM_TIMESTAMPING_OPT_STATS that reports bytes in the write queue but not sent. This is the same metric as what is exported with tcp_info.tcpi_notsent_bytes. Signed-off-by: Yousuk Seung <ysseung@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10net/mlx5e: Show/set Rx network flow classification rules on ul repVlad Buslov3-2/+8
Reuse infrastructure that already exists for pf in legacy mode to show/set Rx network flow classification rules for uplink representors. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com>
2020-03-10net/mlx5e: Init ethtool steering for representorsVlad Buslov1-0/+2
During transition to uplink representors the code responsible for initializing ethtool steering functionality wasn't added to representor init rx routine. This causes NULL pointer dereference during configuration of network flow classification rule with ethtool (only possible to reproduce with next commit in this series which registers necessary ethtool callbacks). Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com>
2020-03-10net/mlx5e: Show/set Rx flow indir table and RSS hash key on ul repVlad Buslov3-4/+9
Reuse infrastructure that already exists for pf in legacy mode to show/set Rx flow hash indirection table and RSS hash key for uplink representors. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com>
2020-03-10net/mlx5e: Introduce root ft concept for representors netdevsSaeed Mahameed3-53/+68
Uplink representor traffic will be redirected to an empty root ft rather than directly to a direct tir or ttc table, this root ft will be empty and will be used as a link for auto-chaining with ttc table or ethtool tables in downstream patches. On load, fs core will connect uplink rep root_ft with ttc table. In case ethtool steering will be used, fs core will auto connect root_ft with the ethtool bypass tables, which will be connected with the ttc table. vport_rx_rule[uplink_rep]->root_ft->ethtool->ttc. For non-uplink representors, for simplicity root_ft will always point at ttc table, hence the replace vport_rx rule logic is removed. vport_rx_rule[non_uplink_rep]->root_ft(ttc). For now ethtool steering support can only be available on uplink rep. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com>
2020-03-10net/mlx5: E-switch, make query inline mode a static functionParav Pandit2-38/+37
mlx5_eswitch_inline_mode_get() is used only in eswitch_offloads.c. Hence, make it static and adjacent to its caller function. Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-10net/mlx5: Allocate smaller size tables for ft offloadPaul Blakey1-1/+4
Instead of giving ft tables one of the largest tables available - 4M, give it a more reasonable size - 64k. Especially since it will always be created as a miss hook in the following patch. Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-10net/mlx5e: Fix an IS_ERR() vs NULL checkDan Carpenter1-1/+1
The esw_vport_tbl_get() function returns error pointers on error. Fixes: 96e326878fa5 ("net/mlx5e: Eswitch, Use per vport tables for mirroring") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-10net/mlx5: Verify goto chain offload supportEli Cohen1-20/+45
According to PRM, forward to flow table along with either packet reformat or decap is supported only if reformat_and_fwd_to_table capability is set for the flow table. Add dependency on the capability and pack all the conditions for "goto chain" in a single function. Fix language in error message in case of not supporting forward to a lower numbered flow table. Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-10net/mlx5: E-Switch, Use vport metadata matching only when mandatoryMajd Dibbiny1-1/+13
Multi-port RoCE mode requires tagging traffic that passes through the vport. This matching can cause performance degradation, therefore disable it and use the legacy matching on vhca_id and source_port when possible. Fixes: 92ab1eb392c6 ("net/mlx5: E-Switch, Enable vport metadata matching if firmware supports it") Signed-off-by: Majd Dibbiny <majd@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-10net/mlx5: Tidy up and fix reverse christmas ordringMark Bloch1-7/+7
Use reverse chirstmas tree inside mlx5e_ethtool_get_link_ksettings. Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-10net/mlx5: Expose port speed when possibleMark Bloch1-2/+8
When port speed can't be reported based on ext_eth_proto_capability or eth_proto_capability instead of reporting speed as unknown check if the port's speed can be inferred based on the data_rate_oper field. Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-24 01:52:00 +0300