| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Although operations on the variable send_peer_notif are already within
a lock-protected critical section, there are cases where it is accessed
outside the lock. Therefore, READ_ONCE() and WRITE_ONCE() should be
added to it.
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Cc: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Tonghao Zhang <tonghao@bamaicloud.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/c1dcc53442f4d0f67beb9e0a3e7a7a6a2c94c47f.1768709239.git.tonghao@bamaicloud.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
After the first trylock fail, retrying immediately is
not advised as there is a high probability of failing
to acquire the lock again. This optimization makes sense.
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Cc: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Tonghao Zhang <tonghao@bamaicloud.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/9aba44f02163e8fe8dbaba63ff2df921bc2b114e.1768709239.git.tonghao@bamaicloud.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch tries to avoid the possible peer notify event loss.
In bond_mii_monitor()/bond_activebackup_arp_mon(), when we hold the rtnl lock:
- check send_peer_notif again to avoid unconditionally reducing this value.
- send_peer_notif may have been reset. Therefore, it is necessary to check
whether to send peer notify via bond_should_notify_peers() to avoid the
loss of notification events.
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Cc: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Tonghao Zhang <tonghao@bamaicloud.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/78cef328822b94638c97638b89011c507b8bf19e.1768709239.git.tonghao@bamaicloud.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The rtnl lock might be locked, preventing ad_cond_set_peer_notif() from
acquiring the lock and updating send_peer_notif. This patch addresses
the issue by using a workqueue. Since updating send_peer_notif does
not require high real-time performance, such delayed updates are entirely
acceptable.
In fact, checking this value and using it in multiple places, all operations
are protected at the same time by rtnl lock, such as
- read send_peer_notif
- send_peer_notif--
- bond_should_notify_peers
By the way, rtnl lock is still required, when accessing bond.params.* for
updating send_peer_notif. In lacp mode, resetting send_peer_notif in
workqueue is safe, simple and effective way.
Additionally, this patch introduces bond_peer_notify_may_events(), which
is used to check whether an event should be sent. This function will be
used in both patch 1 and 2.
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Cc: Jason Xing <kerneljasonxing@gmail.com>
Suggested-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Tonghao Zhang <tonghao@bamaicloud.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/f95accb5db0b10ce3ed2f834fc70f716c9abbb9c.1768709239.git.tonghao@bamaicloud.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add offloading for a link aggregation group supported by the YT921x
switches.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260117162116.1063043-1-mmyangfl@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
Subject: netfilter: updates for net-next
1) Speed up nftables transactions after earlier transaction failed.
Due to a (harmeless) bug we remained in slow paranoia mode until
a successful transaction completes.
2) Allow generic tracker to resolve clashes, this avoids very rare
packet drops. From Yuto Hamaguchi.
3) Increase the cleanup budget to 64 entries in nf_conncount to reap
more entries in one go, from Fernando Fernandez Mancera.
4) Allow icmp trackers to resolve clashes, this avoids very rare
initial packet drop with test cases that have high-frequency pings.
After this all trackers except tcp and sctp allow clash resolution.
5) Disentangle netfilter headers, don't include nftables/xtables headers
in subsystems that are unrelated.
6) Don't rely on implicit includes coming from nf_conntrack_proto_gre.h.
7) Allow nfnetlink_queue nfq instance struct to get accounted via memcg,
from Scott Mitchell.
8) Reject bogus xt target/match data upfront via netlink policiy in
nft_compat interface rather than relying on x_tables API to do it.
9) Fix nf_conncount breakage when trying to limit loopback flows via
prerouting rule, from Fernando Fernandez Mancera.
This is a recent breakage but not seen as urgent enough to rush this
via net tree at this late stage in development cycle.
10) Fix a possible off-by-one when parsing tcp option in xtables tcpmss
match. Also handled via -next due to late stage in development
cycle.
* tag 'nf-next-26-01-20' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: xt_tcpmss: check remaining length before reading optlen
netfilter: nf_conncount: fix tracking of connections from localhost
netfilter: nft_compat: add more restrictions on netlink attributes
netfilter: nfnetlink_queue: nfqnl_instance GFP_ATOMIC -> GFP_KERNEL_ACCOUNT allocation
netfilter: nf_conntrack: don't rely on implicit includes
netfilter: don't include xt and nftables.h in unrelated subsystems
netfilter: nf_conntrack: enable icmp clash support
netfilter: nf_conncount: increase the connection clean up limit to 64
netfilter: nf_conntrack: Add allow_clash to generic protocol handler
netfilter: nf_tables: reset table validation state on abort
====================
Link: https://patch.msgid.link/20260120191803.22208-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Vladimir Oltean says:
====================
Phylink link callback replay helpers for SJA1105 and XPCS
The sja1105 is reducing its direct interaction with the XPCS.
The changes presented here are an older simplification idea, broken out
of a previous patch set to allow for more thorough review.
====================
Link: https://patch.msgid.link/20260119121954.1624535-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sja1105_set_port_config()
Commit a18891b55703 ("net: dsa: sja1105: simplify static configuration
reload") split sja1105_mac_link_up() -> sja1105_adjust_port_config()
into two separate:
- sja1105_set_port_speed()
- sja1105_set_port_config()
in order to pick up the second sja1105_set_port_config() and reuse it
for the sja1105_static_config_reload() procedure which involves saving
and restoring MAC and PCS settings.
Now that these settings are restored by phylink itself, the driver no
longer needs to call its own sja1105_set_port_config(), and the
splitting is unnatural. Merge the functions back, which is to say that
the only supported internal code path is to submit the MAC Configuration
Table entry to hardware after phylink has dictated what we should set it
to.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260119121954.1624535-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sja1105_static_config_reload() changes major settings in the switch and
it requires a reset. A use case is to change things like Qdiscs (but see
sja1105_reset_reasons[] for full list) while PTP synchronization is
running, and the servo loop must not exit the locked state (s2).
Therefore, stopping and restarting the phylink instances of all ports is
not desirable, because that also stops the phylib state machine, and
retriggers a seconds-long auto-negotiation process that breaks PTP.
Thus, saving and restoring the link management settings is handled
privately by the driver.
The method got progressively more complex as SGMII support got added,
because this is handled through the xpcs phylink_pcs component, to which
we don't have unfettered access. Nonetheless, the switch reset line is
hardwired to also reset the XPCS, creating a situation where it loses
state and needs to be reprogrammed at a moment in time outside phylink's
control.
Although commits 907476c66d73 ("net: dsa: sja1105: call PCS
config/link_up via pcs_ops structure") and 41bf58314b17 ("net: dsa:
sja1105: use phylink_pcs internally") made the sja1105 <-> xpcs
interaction slightly prettier, we still depend heavily on the PCS being
"XPCS-like", because to back up its settings, we read the MII_BMCR
register, through a mdiobus_c45_read() operation, breaking all layering
separation.
With the existence of phylink link callback replay helpers, we can do
away with all this custom code and become even more PCS-agnostic, even
though the reset domain is tightly coupled.
This creates the unique opportunity to simplify away even more code than
just the xpcs handling from sja1105_static_config_reload().
The sja1105_set_port_config() method is also invoked from
sja1105_mac_link_up(). And since that is now called directly by
phylink - we can just remove it from sja1105_static_config_reload().
This makes it possible to re-merge sja1105_set_port_speed() and
sja1105_set_port_config() in a later change.
Note that my only setups with sja1105 where the xpcs is used is with the
xpcs on the CPU-facing port (fixed-link). Thus, I cannot test xpcs + PHY.
But the replay procedure walks through all ports, and I did test a
regular RGMII user port + a PHY.
ptp4l[54.552]: master offset 5 s2 freq -931 path delay 764
ptp4l[55.551]: master offset 22 s2 freq -913 path delay 764
ptp4l[56.551]: master offset 13 s2 freq -915 path delay 765
ptp4l[57.552]: master offset 5 s2 freq -919 path delay 765
ptp4l[58.553]: master offset 13 s2 freq -910 path delay 765
ptp4l[59.553]: master offset 13 s2 freq -906 path delay 765
ptp4l[60.553]: master offset 6 s2 freq -909 path delay 765
ptp4l[61.553]: master offset 6 s2 freq -907 path delay 765
ptp4l[62.553]: master offset 6 s2 freq -906 path delay 765
ptp4l[63.553]: master offset 14 s2 freq -896 path delay 765
$ ip link set br0 type bridge vlan_filtering 1
[ 63.983283] sja1105 spi2.0 sw0p0: Link is Down
[ 63.991913] sja1105 spi2.0: Link is Down
[ 64.009784] sja1105 spi2.0: Reset switch and programmed static config. Reason: VLAN filtering
[ 64.020217] sja1105 spi2.0 sw0p0: Link is Up - 1Gbps/Full - flow control off
[ 64.030683] sja1105 spi2.0: Link is Up - 1Gbps/Full - flow control off
ptp4l[64.554]: master offset 7397 s2 freq +6491 path delay 765
ptp4l[65.554]: master offset 38 s2 freq +1352 path delay 765
ptp4l[66.554]: master offset -2225 s2 freq -900 path delay 764
ptp4l[67.555]: master offset -2226 s2 freq -1569 path delay 765
ptp4l[68.555]: master offset -1553 s2 freq -1563 path delay 765
ptp4l[69.555]: master offset -865 s2 freq -1341 path delay 765
ptp4l[70.555]: master offset -401 s2 freq -1137 path delay 765
ptp4l[71.556]: master offset -145 s2 freq -1001 path delay 765
ptp4l[72.558]: master offset -26 s2 freq -926 path delay 765
ptp4l[73.557]: master offset 30 s2 freq -877 path delay 765
ptp4l[74.557]: master offset 47 s2 freq -851 path delay 765
ptp4l[75.557]: master offset 29 s2 freq -855 path delay 765
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260119121954.1624535-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some drivers of MAC + tightly integrated PCS (example: SJA1105 + XPCS
covered by same reset domain) need to perform resets at runtime.
The reset is triggered by the MAC driver, and it needs to restore its
and the PCS' registers, all invisible to phylink.
However, there is a desire to simplify the API through which the MAC and
the PCS interact, so this becomes challenging.
Phylink holds all the necessary state to help with this operation, and
can offer two helpers which walk the MAC and PCS drivers again through
the callbacks required during a destructive reset operation. The
procedure is as follows:
Before reset, MAC driver calls phylink_replay_link_begin():
- Triggers phylink mac_link_down() and pcs_link_down() methods
After reset, MAC driver calls phylink_replay_link_end():
- Triggers phylink mac_config() -> pcs_config() -> mac_link_up() ->
pcs_link_up() methods.
MAC and PCS registers are restored with no other custom driver code.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260119121954.1624535-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is a trivial change with no functional effect which replaces the
pattern:
if (a) {
if (b) {
do_stuff();
}
}
with:
if (a && b) {
do_stuff();
};
The purpose is to reduce the delta of a subsequent functional change.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260119121954.1624535-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Vladimir Oltean says:
====================
PHY polarity inversion via generic device tree properties
Using the "rx-polarity" and "tx-polarity" device tree properties
introduced in linux-phy and merged into net-next in
commit 96a2d53f2478 ("Merge tag 'phy_common_properties' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy")
we convert here two existing networking use cases - the EN8811H Ethernet
PHY and the Mediatek LynxI PCS.
Original cover letter:
Polarity inversion (described in patch 4/10) is a feature with at least
4 potential new users waiting for a generic description:
- Horatiu Vultur with the lan966x SerDes
- Daniel Golle with the MaxLinear GSW1xx switches
- Bjørn Mork with the AN8811HB Ethernet PHY
- Me with a custom SJA1105 board, switch which uses the DesignWare XPCS
I became interested in exploring the problem space because I was averse
to the idea of adding vendor-specific device tree properties to describe
a common need.
This set contains an implementation of a generic feature that should
cater to all known needs that were identified during my documentation
phase.
Apart from what is converted here, we also have the following, which I
did not touch:
- "st,px_rx_pol_inv" - its binding is a .txt file and I don't have time
for such a large detour to convert it to dtschema.
- "st,pcie-tx-pol-inv" and "st,sata-tx-pol-inv" - these are defined in a
.txt schema but are not implemented in any driver. My verdict would be
"delete the properties" but again, I would prefer not introducing such
dependency to this series.
====================
Link: https://patch.msgid.link/20260119091220.1493761-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Prefer the new "rx-polarity" and "tx-polarity" properties, which in this
case have the advantage that polarity inversion can be specified per
direction (and per protocol, although this isn't useful here).
We use the vendor specific ones as fallback if the standard description
doesn't exist.
Daniel, referring to the Mediatek SDK, clarifies that the combined
SGMII_PN_SWAP_TX_RX register field should be split like this: bit 0 is
TX and bit 1 is RX:
https://lore.kernel.org/linux-phy/aSW--slbJWpXK0nv@makrotopia.org/
Suggested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260119091220.1493761-6-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Mediatek LynxI PCS is used from the MT7530 DSA driver (where it does
not have an OF presence) and from mtk_eth_soc, where it does
(Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml
informs of a combined clock provider + SGMII PCS "SGMIISYS" syscon
block).
Currently, mtk_eth_soc parses the SGMIISYS OF node for the
"mediatek,pnswap" property and sets a bit in the "flags" argument of
mtk_pcs_lynxi_create() if set.
I'd like to deprecate "mediatek,pnswap" in favour of a property which
takes the current phy-mode into consideration. But this is only known at
mtk_pcs_lynxi_config() time, and not known at mtk_pcs_lynxi_create(),
when the SGMIISYS OF node is parsed.
To achieve that, we must pass the OF node of the PCS, if it exists, to
mtk_pcs_lynxi_create(), and let the PCS take a reference on it and
handle property parsing whenever it wants.
Use the fwnode API which is more general than OF (in case we ever need
to describe the PCS using some other format). This API should be NULL
tolerant, so add no particular tests for the mt7530 case.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260119091220.1493761-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Reference the common PHY properties, and update the example to use them.
Note that a PCS subnode exists, and it seems a better container of the
polarity description than the SGMIISYS node that hosts "mediatek,pnswap".
So use that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260119091220.1493761-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Prefer the new "rx-polarity" and "tx-polarity" properties, and use the
vendor specific ones as fallback if the standard description doesn't
exist.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260119091220.1493761-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
"airoha,pnswap-tx"
Reference the common PHY properties, and update the example to use them.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260119091220.1493761-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric Dumazet says:
====================
gro: inline tcp6_gro_{receive,complete}
On some platforms, GRO stack is too deep and causes cpu stalls.
Decreasing call depths by one shows a 1.5 % gain on Zen2 cpus.
(32 RX queues, 100Gbit NIC, RFS enabled, tcp_rr with 128 threads and 10,000 flows)
We can go further by inlining ipv6_gro_{receive,complete}
and take care of IPv4 if there is interest.
Note: two temporary __always_inline will be replaced with
inline_for_performance when/if available.
Cumulative size increase for this series (of 3):
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux.3
add/remove: 2/2 grow/shrink: 5/1 up/down: 1572/-471 (1101)
Function old new delta
ipv6_gro_receive 1069 1846 +777
ipv6_gro_complete 433 733 +300
tcp6_check_fraglist_gro - 272 +272
tcp6_gro_complete 227 306 +79
tcp4_gro_complete 325 397 +72
ipv6_offload_init 218 274 +56
__pfx_tcp6_check_fraglist_gro - 16 +16
__pfx___skb_incr_checksum_unnecessary 32 - -32
__skb_incr_checksum_unnecessary 186 - -186
tcp6_gro_receive 959 706 -253
Total: Before=22592724, After=22593825, chg +0.00%
====================
Link: https://patch.msgid.link/20260120164903.1912995-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove one function call from GRO stack for native IPv6 + TCP packets.
$ scripts/bloat-o-meter -t vmlinux.2 vmlinux.3
add/remove: 0/0 grow/shrink: 1/1 up/down: 298/-5 (293)
Function old new delta
ipv6_gro_complete 435 733 +298
tcp6_gro_complete 311 306 -5
Total: Before=22593532, After=22593825, chg +0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260120164903.1912995-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
FDO/LTO are unable to inline tcp6_gro_receive() from ipv6_gro_receive()
Make sure tcp6_check_fraglist_gro() is only called only when needed,
so that compiler can leave it out-of-line.
$ scripts/bloat-o-meter -t vmlinux.1 vmlinux.2
add/remove: 2/0 grow/shrink: 3/1 up/down: 1123/-253 (870)
Function old new delta
ipv6_gro_receive 1069 1846 +777
tcp6_check_fraglist_gro - 272 +272
ipv6_offload_init 218 274 +56
__pfx_tcp6_check_fraglist_gro - 16 +16
ipv6_gro_complete 433 435 +2
tcp6_gro_receive 959 706 -253
Total: Before=22592662, After=22593532, chg +0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260120164903.1912995-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
clang does not inline this helper in GRO fast path.
We can save space and cpu cycles.
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux.1
add/remove: 0/2 grow/shrink: 2/0 up/down: 156/-218 (-62)
Function old new delta
tcp6_gro_complete 227 311 +84
tcp4_gro_complete 325 397 +72
__pfx___skb_incr_checksum_unnecessary 32 - -32
__skb_incr_checksum_unnecessary 186 - -186
Total: Before=22592724, After=22592662, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260120164903.1912995-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We can change tcp_rsk() and inet_rsk() to propagate their argument
const qualifier thanks to container_of_const().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260120125353.1470456-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'airoha-add-the-capability-to-read-firmware-binary-names-from-dts-for-airoha-npu-driver'
Lorenzo Bianconi says:
====================
airoha: Add the capability to read firmware binary names from dts for Airoha NPU driver
This patch is needed because NPU firmware binaries are board specific since
they depend on the MediaTek WiFi chip used on the board (e.g. MT7996 or
MT7992). This is a preliminary patch to enable MT76 NPU offloading if
the Airoha SoC is equipped with MT7996 (Eagle) WiFi chipset.
====================
Link: https://patch.msgid.link/20260120-airoha-npu-firmware-name-v4-0-88999628b4c1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce the capability to read the firmware binary names from device-tree
using the firmware-name property if available.
This patch is needed because NPU firmware binaries are board specific since
they depend on the MediaTek WiFi chip used on the board (e.g. MT7996 or
MT7992) and the WiFi chip version info is not available in the NPU driver.
This is a preliminary patch to enable MT76 NPU offloading if the Airoha SoC
is equipped with MT7996 (Eagle) WiFi chipset.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260120-airoha-npu-firmware-name-v4-2-88999628b4c1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add firmware-name property in order to introduce the capability to
specify the firmware names used for 'RiscV core' and 'Data section'
binaries. This patch is needed because NPU firmware binaries are board
specific since they depend on the MediaTek WiFi chip used on the board
(e.g. MT7996 or MT7992) and the WiFi chip version info is not available
in the NPU driver. This is a preliminary patch to enable MT76 NPU
offloading if the Airoha SoC is equipped with MT7996 (Eagle) WiFi chipset.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260120-airoha-npu-firmware-name-v4-1-88999628b4c1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Andre Carvalho says:
====================
netconsole: support automatic target recovery
This patchset introduces target resume capability to netconsole allowing
it to recover targets when underlying low-level interface comes back
online.
The patchset starts by refactoring netconsole state representation in
order to allow representing deactivated targets (targets that are
disabled due to interfaces unregister).
It then modifies netconsole to handle NETDEV_REGISTER events for such
targets, setups netpoll and forces the device UP. Targets are matched with
incoming interfaces depending on how they were bound in netconsole
(by mac or interface name). For these reasons, we also attempt resuming
on NETDEV_CHANGENAME.
The patchset includes a selftest that validates netconsole target state
transitions and that target is functional after resumed.
====================
Link: https://patch.msgid.link/20260118-netcons-retrigger-v11-0-4de36aebcf48@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce a new netconsole selftest to validate that netconsole is able
to resume a deactivated target when the low level interface comes back.
The test setups the network using netdevsim, creates a netconsole target
and then remove/add netdevsim in order to bring the same interfaces
back. Afterwards, the test validates that the target works as expected.
Targets are created via cmdline parameters to the module to ensure that
we are able to resume targets that were bound by mac and interface name.
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260118-netcons-retrigger-v11-7-4de36aebcf48@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Attempt to resume a previously deactivated target when the associated
interface comes back (NETDEV_REGISTER) or when it changes name
(NETDEV_CHANGENAME) by calling netpoll_setup on the device.
Depending on how the target was setup (by mac or interface name), the
corresponding field is compared with the device being brought up. Targets
that match the incoming device, are scheduled for resume on a workqueue.
Resuming happens on a workqueue as we can't execute netpoll_setup in the
context of the netdev event. A standalone workqueue (as opposed to the
global one) is used to allow for proper cleanup process during
netconsole module cleanup as we need to be able to flush all pending
work before traversing the target list given that targets are temporarily
removed from the list during resume_target.
Target transitions to STATE_DISABLED in case of failures resuming it to
avoid retrying the same target indefinitely.
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260118-netcons-retrigger-v11-6-4de36aebcf48@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This commit introduces two helper functions to perform lock/unlock on
dynamic_netconsole_mutex providing no-op stub versions when compiled
without CONFIG_NETCONSOLE_DYNAMIC and refactors existing call sites to
use the new helpers.
This is done following kernel coding style guidelines, in preparation
for an upcoming change. It avoids the need for preprocessor conditionals
in the call site and keeps the logic easier to follow.
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260118-netcons-retrigger-v11-5-4de36aebcf48@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch makes sure netconsole clears dev_name for devices bound by mac
in order to allow calling setup_netpoll on targets that have previously
been cleaned up (in order to support resuming deactivated targets).
This is required as netpoll_setup populates dev_name even when devices are
matched via mac address. The cleanup is done inside netconsole as bound
by mac is a netconsole concept.
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260118-netcons-retrigger-v11-4-4de36aebcf48@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the low level interface brings a netconsole target down, record this
using a new STATE_DEACTIVATED state. This allows netconsole to distinguish
between targets explicitly disabled by users and those deactivated due to
interface state changes.
It also enables automatic recovery and re-enabling of targets if the
underlying low-level interfaces come back online.
From a code perspective, anything that is not STATE_ENABLED is disabled.
Devices (de)enslaving are marked STATE_DISABLED to prevent automatically
resuming as enslaved interfaces cannot have netconsole enabled.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260118-netcons-retrigger-v11-3-4de36aebcf48@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch refactors the netconsole driver's target enabled state from a
simple boolean to an explicit enum (`target_state`).
This allow the states to be expanded to a new state in the upcoming
change.
Co-developed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260118-netcons-retrigger-v11-2-4de36aebcf48@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduces a enum to track netconsole target state which is going to
replace the enabled boolean.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260118-netcons-retrigger-v11-1-4de36aebcf48@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'add-devm_clk_bulk_get_optional_enable-helper-and-use-in-axi-ethernet-driver'
Suraj Gupta says:
====================
Add devm_clk_bulk_get_optional_enable() helper and use in AXI Ethernet driver
This patch series introduces a new managed clock framework helper function
and demonstrates its usage in AXI ethernet driver.
Device drivers frequently need to get optional bulk clocks, prepare them,
and enable them during probe, while ensuring automatic cleanup on device
unbind. Currently, this requires three separate operations with manual
cleanup handling.
The new devm_clk_bulk_get_optional_enable() helper combines these
operations into a single managed call, eliminating boilerplate code and
following the established pattern of devm_clk_bulk_get_all_enabled().
====================
Link: https://patch.msgid.link/20260116192725.972966-1-suraj.gupta2@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Transition axienet_probe() to managed resource allocation using devm_*
APIs for network device and clock handling, while improving error paths
with dev_err_probe(). This eliminates the need for manual resource
cleanup during probe failures and streamlines the remove() function.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Co-developed-by: Suraj Gupta <suraj.gupta2@amd.com>
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Link: https://patch.msgid.link/20260116192725.972966-3-suraj.gupta2@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new managed clock framework helper function that combines getting
optional bulk clocks and enabling them in a single operation.
The devm_clk_bulk_get_optional_enable() function simplifies the common
pattern where drivers need to get optional bulk clocks, prepare and enable
them, and have them automatically disabled/unprepared and freed when the
device is unbound.
This new API follows the established pattern of
devm_clk_bulk_get_all_enabled() and reduces boilerplate code in drivers
that manage multiple optional clocks.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://patch.msgid.link/20260116192725.972966-2-suraj.gupta2@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
HIPPI has not been relevant for over two decades. It was rapidly
eclipsed by Fibre Channel, and even when it was new, it was
confined to very high-end hardware. The HIPPI code has only
received tree-wide changes and fixes by inspection in the entire
Git history. Remove HIPPI support and the rrunner HIPPI driver,
and move the former maintainer to the CREDITS file. Keep the
include/uapi/linux/if_hippi.h header because it is used by the TUN
code, and to avoid breaking userspace, however unlikely that may be.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260119022451.22344-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp_rate_skb_delivered() is only called from tcp_input.c.
Move it there and make it static.
Both gcc and clang are (auto)inlining it, TCP performance
is increased at a small space cost.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/2 grow/shrink: 3/0 up/down: 509/-187 (322)
Function old new delta
tcp_sacktag_walk 1682 1867 +185
tcp_ack 5230 5405 +175
tcp_shifted_skb 437 586 +149
__pfx_tcp_rate_skb_delivered 16 - -16
tcp_rate_skb_delivered 171 - -171
Total: Before=22566192, After=22566514, chg +0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20260118123204.2315993-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Yicong Hui says:
====================
Fix typos in network driver code comments
Fix various minor typos and mispellings in 3 different driver
subdirectories in drivers/net/ethernet
====================
Link: https://patch.msgid.link/20260118121001.136806-1-yiconghui@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix misspelling of "software" as "softare" in xen-netback code comment.
Signed-off-by: Yicong Hui <yiconghui@gmail.com>
Link: https://patch.msgid.link/20260118121001.136806-4-yiconghui@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix various typos and misspellings in code comments in the
drivers/net/ethernet/micrel directory
Signed-off-by: Yicong Hui <yiconghui@gmail.com>
Link: https://patch.msgid.link/20260118121001.136806-3-yiconghui@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix various typos and misspellings in code comments in the
drivers/net/ethernet/emulex directory
Signed-off-by: Yicong Hui <yiconghui@gmail.com>
Link: https://patch.msgid.link/20260118121001.136806-2-yiconghui@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Based on the fact that either bus_id-based matching or phy_uid-based
matching is used, the code can be simplified. PHY_ANY_ID and
PHY_ANY_UID are not needed. Ensure that phy_id_compare() is called
only if phy_uid_mask isn't zero, because a zero value would always
result in a match.
In addition change the return value type of phy_needs_fixup() to bool.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/e7394cc8-5895-4d02-a8fe-802345c7c547@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
of_device_get_match_data()
Use of_device_get_match_data() to replace the open-coded method for
obtaining the device config.
Additionally, adjust the ordering of local variables to ensure
compatibility with RCS.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260117-macb-v1-1-f092092d8c91@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The industry standard jumbo frame MTU is 9216 bytes. When using the DSA
subsystem, a 4-byte tag is added to each Ethernet frame.
Increase AIROHA_MAX_MTU to 9220 bytes (9216 + 4) so that users can set a
standard 9216-byte MTU on DSA ports.
The underlying hardware supports significantly larger frame sizes
(approximately 16K). However, the maximum MTU is limited to 9220 bytes
for now, as this is sufficient to support standard jumbo frames and does
not incur additional memory allocation overhead.
Signed-off-by: Sayantan Nandy <sayantann11@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260119073658.6216-1-sayantann11@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
active_fec is a 2-bit unsigned field, and thus can only have the values
0-3. So checking that it is less than 4 is unnecessary.
Simplify the code by dropping this check.
As it no longer fits well where it is, move FEC_MAX_INDEX to towards the
top of the file. And add the prefix OXT2. I believe this is more
idiomatic.
Flagged by Smatch as:
...//otx2_ethtool.c:1024 otx2_get_fecparam() warn: always true condition '(pfvf->linfo.fec < 4) => (0-3 < 4)'
No functional change intended.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20260119-oob-v1-1-a4147e75e770@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Looks like AI reviewers miss that napi_consume_skb() must have
a real budget passed to it. Let's see if adding a real kdoc will
help them figure this out.
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20260119224140.1362729-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the TX queue length reaches the threshold, the netdev watchdog
immediately detects a TX queue timeout.
This patch updates the trans_start timestamp of the transmit queue
on every asynchronous USB URB submission along the transmit path,
ensuring that the network watchdog accurately reflects ongoing
transmission activity.
Signed-off-by: Mingj Ye <insyelu@gmail.com>
Reviewed-by: Hayes Wang <hayeswang@realtek.com>
Link: https://patch.msgid.link/20260120015949.84996-1-insyelu@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit ca9d74eb5f6a ("uapi: add INT_MAX and INT_MIN constants")
recently removed some includes of limits.h in uAPI headers.
ncdevmem.c was depending on them:
ncdevmem.c: In function ‘ethtool_add_flow’:
ncdevmem.c:369:60: error: ‘INT_MAX’ undeclared (first use in this function)
369 | if (endptr == id_start || flow_id < 0 || flow_id > INT_MAX)
| ^~~~~~~
ncdevmem.c:77:1: note: ‘INT_MAX’ is defined in header ‘<limits.h>’; did you forget to ‘#include <limits.h>’?
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20260120180319.1673271-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After skb allocation, initial skb->fclone value is 0 (SKB_FCLONE_UNAVAILABLE)
We can replace one RMW sequence with a single OR instruction.
movzbl 0x7e(%r13),%eax // skb->fclone = SKB_FCLONE_ORIG;
and $0xf3,%al
or $0x4,%al
mov %al,0x7e(%r13)
->
or $0x4,0x7e(%r13) // skb->fclone |= SKB_FCLONE_ORIG;
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260116164402.1872649-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
