summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-03-01e1000e: Correct NVM checksum verification flowSasha Neftin1-2/+2
Update MAC type check e1000_pch_tgp because for e1000_pch_cnp, NVM checksum update is still possible. Emit a more detailed warning message. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1191663 Fixes: 4051f68318ca ("e1000e: Do not take care about recovery NVM checksum") Reported-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-01e1000e: Fix possible HW unit hang after an s0ix exitSasha Neftin4-0/+32
Disable the OEM bit/Gig Disable/restart AN impact and disable the PHY LAN connected device (LCD) reset during power management flows. This fixes possible HW unit hangs on the s0ix exit on some corporate ADL platforms. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214821 Fixes: 3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix") Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Suggested-by: Nir Efrati <nir.efrati@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-01netfilter: egress: silence egress hook lockdep splatsFlorian Westphal1-0/+4
Netfilter assumes its called with rcu_read_lock held, but in egress hook case it may be called with BH readlock. This triggers lockdep splat. In order to avoid to change all rcu_dereference() to rcu_dereference_check(..., rcu_read_lock_bh_held()), wrap nf_hook_slow with read lock/unlock pair. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-03-01netfilter: fix use-after-free in __nf_register_net_hook()Eric Dumazet1-2/+3
We must not dereference @new_hooks after nf_hook_mutex has been released, because other threads might have freed our allocated hooks already. BUG: KASAN: use-after-free in nf_hook_entries_get_hook_ops include/linux/netfilter.h:130 [inline] BUG: KASAN: use-after-free in hooks_validate net/netfilter/core.c:171 [inline] BUG: KASAN: use-after-free in __nf_register_net_hook+0x77a/0x820 net/netfilter/core.c:438 Read of size 2 at addr ffff88801c1a8000 by task syz-executor237/4430 CPU: 1 PID: 4430 Comm: syz-executor237 Not tainted 5.17.0-rc5-syzkaller-00306-g2293be58d6a1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x336 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 nf_hook_entries_get_hook_ops include/linux/netfilter.h:130 [inline] hooks_validate net/netfilter/core.c:171 [inline] __nf_register_net_hook+0x77a/0x820 net/netfilter/core.c:438 nf_register_net_hook+0x114/0x170 net/netfilter/core.c:571 nf_register_net_hooks+0x59/0xc0 net/netfilter/core.c:587 nf_synproxy_ipv6_init+0x85/0xe0 net/netfilter/nf_synproxy_core.c:1218 synproxy_tg6_check+0x30d/0x560 net/ipv6/netfilter/ip6t_SYNPROXY.c:81 xt_check_target+0x26c/0x9e0 net/netfilter/x_tables.c:1038 check_target net/ipv6/netfilter/ip6_tables.c:530 [inline] find_check_entry.constprop.0+0x7f1/0x9e0 net/ipv6/netfilter/ip6_tables.c:573 translate_table+0xc8b/0x1750 net/ipv6/netfilter/ip6_tables.c:735 do_replace net/ipv6/netfilter/ip6_tables.c:1153 [inline] do_ip6t_set_ctl+0x56e/0xb90 net/ipv6/netfilter/ip6_tables.c:1639 nf_setsockopt+0x83/0xe0 net/netfilter/nf_sockopt.c:101 ipv6_setsockopt+0x122/0x180 net/ipv6/ipv6_sockglue.c:1024 rawv6_setsockopt+0xd3/0x6a0 net/ipv6/raw.c:1084 __sys_setsockopt+0x2db/0x610 net/socket.c:2180 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f65a1ace7d9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 71 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f65a1a7f308 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 00007f65a1ace7d9 RDX: 0000000000000040 RSI: 0000000000000029 RDI: 0000000000000003 RBP: 00007f65a1b574c8 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000020000000 R11: 0000000000000246 R12: 00007f65a1b55130 R13: 00007f65a1b574c0 R14: 00007f65a1b24090 R15: 0000000000022000 </TASK> The buggy address belongs to the page: page:ffffea0000706a00 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1c1a8 flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000000000 ffffea0001c1b108 ffffea000046dd08 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as freed page last allocated via order 2, migratetype Unmovable, gfp_mask 0x52dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_ZERO), pid 4430, ts 1061781545818, free_ts 1061791488993 prep_new_page mm/page_alloc.c:2434 [inline] get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4165 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5389 __alloc_pages_node include/linux/gfp.h:572 [inline] alloc_pages_node include/linux/gfp.h:595 [inline] kmalloc_large_node+0x62/0x130 mm/slub.c:4438 __kmalloc_node+0x35a/0x4a0 mm/slub.c:4454 kmalloc_node include/linux/slab.h:604 [inline] kvmalloc_node+0x97/0x100 mm/util.c:580 kvmalloc include/linux/slab.h:731 [inline] kvzalloc include/linux/slab.h:739 [inline] allocate_hook_entries_size net/netfilter/core.c:61 [inline] nf_hook_entries_grow+0x140/0x780 net/netfilter/core.c:128 __nf_register_net_hook+0x144/0x820 net/netfilter/core.c:429 nf_register_net_hook+0x114/0x170 net/netfilter/core.c:571 nf_register_net_hooks+0x59/0xc0 net/netfilter/core.c:587 nf_synproxy_ipv6_init+0x85/0xe0 net/netfilter/nf_synproxy_core.c:1218 synproxy_tg6_check+0x30d/0x560 net/ipv6/netfilter/ip6t_SYNPROXY.c:81 xt_check_target+0x26c/0x9e0 net/netfilter/x_tables.c:1038 check_target net/ipv6/netfilter/ip6_tables.c:530 [inline] find_check_entry.constprop.0+0x7f1/0x9e0 net/ipv6/netfilter/ip6_tables.c:573 translate_table+0xc8b/0x1750 net/ipv6/netfilter/ip6_tables.c:735 do_replace net/ipv6/netfilter/ip6_tables.c:1153 [inline] do_ip6t_set_ctl+0x56e/0xb90 net/ipv6/netfilter/ip6_tables.c:1639 nf_setsockopt+0x83/0xe0 net/netfilter/nf_sockopt.c:101 page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1352 [inline] free_pcp_prepare+0x374/0x870 mm/page_alloc.c:1404 free_unref_page_prepare mm/page_alloc.c:3325 [inline] free_unref_page+0x19/0x690 mm/page_alloc.c:3404 kvfree+0x42/0x50 mm/util.c:613 rcu_do_batch kernel/rcu/tree.c:2527 [inline] rcu_core+0x7b1/0x1820 kernel/rcu/tree.c:2778 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 Memory state around the buggy address: ffff88801c1a7f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88801c1a7f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff88801c1a8000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff88801c1a8080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88801c1a8100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Fixes: 2420b79f8c18 ("netfilter: debug: check for sorted array") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-02-28Merge tag 'soc-fixes-5.17-2' of ↵Linus Torvalds39-102/+138
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "The code changes address mostly minor problems: - Several NXP/FSL SoC driver fixes, addressing issues with error handling and compilation - Fix a clock disabling imbalance in gpcv2 driver. - Arm Juno DMA coherency issue - Trivial firmware driver fixes for op-tee and scmi firmware The remaining changes address issues in the devicetree files: - A timer regression for the OMAP devkit8000, which has to use the alternative timer. - A hang in the i.MX8MM power domain configuration - Multiple fixes for the Rockchip RK3399 addressing issues with sound and eMMC - Cosmetic fixes for i.MX8ULP, RK3xxx, and Tegra124" * tag 'soc-fixes-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits) ARM: tegra: Move panels to AUX bus soc: imx: gpcv2: Fix clock disabling imbalance in error path soc: fsl: qe: Check of ioremap return value soc: fsl: qe: fix typo in a comment soc: fsl: guts: Add a missing memory allocation failure check soc: fsl: guts: Revert commit 3c0d64e867ed soc: fsl: Correct MAINTAINERS database (SOC) soc: fsl: Correct MAINTAINERS database (QUICC ENGINE LIBRARY) soc: fsl: Replace kernel.h with the necessary inclusions dt-bindings: fsl,layerscape-dcfg: add missing compatible for lx2160a dt-bindings: qoriq-clock: add missing compatible for lx2160a ARM: dts: Use 32KiHz oscillator on devkit8000 ARM: dts: switch timer config to common devkit8000 devicetree tee: optee: fix error return code in probe function arm64: dts: imx8ulp: Set #thermal-sensor-cells to 1 as required arm64: dts: imx8mm: Fix VPU Hanging ARM: dts: rockchip: fix a typo on rk3288 crypto-controller ARM: dts: rockchip: reorder rk322x hmdi clocks firmware: arm_scmi: Remove space in MODULE_ALIAS name arm64: dts: agilex: use the compatible "intel,socfpga-agilex-hsotg" ...
2022-02-28Merge tag 'efi-urgent-for-v5.17-2' of ↵Linus Torvalds2-8/+14
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI fixes from Ard Biesheuvel: - don't treat valid hartid U32_MAX as a failure return code (RISC-V) - avoid blocking query_variable_info() call when blocking is not allowed * tag 'efi-urgent-for-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efivars: Respect "block" flag in efivar_entry_set_safe() riscv/efi_stub: Fix get_boot_hartid_from_fdt() return value
2022-02-28drm/arm: arm hdlcd select DRM_GEM_CMA_HELPERCarsten Haitzler1-0/+1
Without DRM_GEM_CMA_HELPER HDLCD won't build. This needs to be there too. Fixes: 09717af7d13d ("drm: Remove CONFIG_DRM_KMS_CMA_HELPER option") Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220124162437.2470344-1-carsten.haitzler@foss.arm.com
2022-02-28net: dm9051: Make remove() callback a void functionStephen Rothwell1-3/+1
Changes introduced since the merge window in the spi subsystem and available at: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git tags/spi-remove-void make the remove() callback for spi return void rather than int, breaking the newly added dm9051 driver fail to build. This patch fixes this issue, converting the remove() function provided by the driver to return void. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> [Rewrote commit message -- broonie] Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220228173957.1262628-2-broonie@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-28Merge tag 'spi-remove-void' of ↵Jakub Kicinski198-616/+244
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Mark Brown says: ==================== spi: Make remove() return void This series from Uwe Kleine-König converts the spi remove function to return void since there is nothing useful that we can do with a failure and it as more buses are converted it'll enable further work on the driver core. ==================== Link: https://lore.kernel.org/r/20220228173957.1262628-2-broonie@kernel.org/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-28drm/bridge: ti-sn65dsi86: Properly undo autosuspendDouglas Anderson1-2/+3
The PM Runtime docs say: Drivers in ->remove() callback should undo the runtime PM changes done in ->probe(). Usually this means calling pm_runtime_disable(), pm_runtime_dont_use_autosuspend() etc. We weren't doing that for autosuspend. Let's do it. Fixes: 9bede63127c6 ("drm/bridge: ti-sn65dsi86: Use pm_runtime autosuspend") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220222141838.1.If784ba19e875e8ded4ec4931601ce6d255845245@changeid
2022-02-28x86/speculation: Update link to AMD speculation whitepaperKim Phillips1-3/+3
Update the link to the "Software Techniques for Managing Speculation on AMD Processors" whitepaper. Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de>
2022-02-28x86/speculation: Use generic retpoline by default on AMDKim Phillips1-9/+0
AMD retpoline may be susceptible to speculation. The speculation execution window for an incorrect indirect branch prediction using LFENCE/JMP sequence may potentially be large enough to allow exploitation using Spectre V2. By default, don't use retpoline,lfence on AMD. Instead, use the generic retpoline. Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de>
2022-02-28bpf, docs: Add a missing colon in verifier.rstWan Jiabing1-1/+1
Add a missing colon to fix the document style. Fixes: 88691e9e1ef5 ("bpf, docs: Split general purpose eBPF documentation out of filter.rst") Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220228080416.1689327-1-wanjiabing@vivo.com
2022-02-28bpf: Cache the last valid build_idHao Luo1-1/+11
For binaries that are statically linked, consecutive stack frames are likely to be in the same VMA and therefore have the same build id. On a real-world workload, we observed that 66% of CPU cycles in __bpf_get_stackid() were spent on build_id_parse() and find_vma(). As an optimization for this case, we can cache the previous frame's VMA, if the new frame has the same VMA as the previous one, reuse the previous one's build id. We are holding the MM locks as reader across the entire loop, so we don't need to worry about VMA going away. Tested through "stacktrace_build_id" and "stacktrace_build_id_nmi" in test_progs. Suggested-by: Greg Thelen <gthelen@google.com> Signed-off-by: Hao Luo <haoluo@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/bpf/20220224000531.1265030-1-haoluo@google.com
2022-02-28igc: igc_write_phy_reg_gpy: drop premature returnSasha Neftin1-2/+0
Similar to "igc_read_phy_reg_gpy: drop premature return" patch. igc_write_phy_reg_gpy checks the return value from igc_write_phy_reg_mdic and if it's not 0, returns immediately. By doing this, it leaves the HW semaphore in the acquired state. Drop this premature return statement, the function returns after releasing the semaphore immediately anyway. Fixes: 5586838fe9ce ("igc: Add code for PHY support") Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Reported-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-28igc: igc_read_phy_reg_gpy: drop premature returnCorinna Vinschen1-2/+0
igc_read_phy_reg_gpy checks the return value from igc_read_phy_reg_mdic and if it's not 0, returns immediately. By doing this, it leaves the HW semaphore in the acquired state. Drop this premature return statement, the function returns after releasing the semaphore immediately anyway. Fixes: 5586838fe9ce ("igc: Add code for PHY support") Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-28libbpf: Fix BPF_MAP_TYPE_PERF_EVENT_ARRAY auto-pinningStijn Tintel1-19/+25
When a BPF map of type BPF_MAP_TYPE_PERF_EVENT_ARRAY doesn't have the max_entries parameter set, the map will be created with max_entries set to the number of available CPUs. When we try to reuse such a pinned map, map_is_reuse_compat will return false, as max_entries in the map definition differs from max_entries of the existing map, causing the following error: libbpf: couldn't reuse pinned map at '/sys/fs/bpf/m_logging': parameter mismatch Fix this by overwriting max_entries in the map definition. For this to work, we need to do this in bpf_object__create_maps, before calling bpf_object__reuse_map. Fixes: 57a00f41644f ("libbpf: Add auto-pinning of maps when loading BPF objects") Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20220225152355.315204-1-stijn@linux-ipv6.be
2022-02-28bpf, selftests: Use raw_tp program for atomic testHou Tao2-83/+36
Now atomic tests will attach fentry program and run it through bpf_prog_test_run_opts(), but attaching fentry program depends on BPF trampoline which is only available under x86-64. Considering many archs have atomic support, using raw_tp program instead. Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220217072232.1186625-5-houtao1@huawei.com
2022-02-28bpf, arm64: Support more atomic operationsHou Tao2-45/+217
Atomics for eBPF patch series adds support for atomic[64]_fetch_add, atomic[64]_[fetch_]{and,or,xor} and atomic[64]_{xchg|cmpxchg}, but it only adds support for x86-64, so support these atomic operations for arm64 as well. Basically the implementation procedure is almost mechanical translation of code snippets in atomic_ll_sc.h & atomic_lse.h & cmpxchg.h located under arch/arm64/include/asm. When LSE atomic is unavailable, an extra temporary register is needed for (BPF_ADD | BPF_FETCH) to save the value of src register, instead of adding TMP_REG_4 just use BPF_REG_AX instead. Also make emit_lse_atomic() as an empty inline function when CONFIG_ARM64_LSE_ATOMICS is disabled. For cpus_have_cap(ARM64_HAS_LSE_ATOMICS) case and no-LSE-ATOMICS case, the following three tests: "./test_verifier", "./test_progs -t atomic" and "insmod ./test_bpf.ko" are exercised and passed. Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220217072232.1186625-4-houtao1@huawei.com
2022-02-28Merge branch 'for-next/insn' of ↵Daniel Borkmann5-36/+268
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/arm64/linux Will Deacon says: ==================== On Tue, Feb 22, 2022 at 10:38:02PM +0000, Will Deacon wrote: > On Thu, 17 Feb 2022 15:22:28 +0800, Hou Tao wrote: > > Atomics support in bpf has already been done by "Atomics for eBPF" > > patch series [1], but it only adds support for x86, and this patchset > > adds support for arm64. > > > > Patch #1 & patch #2 are arm64 related. Patch #1 moves the common used > > macro AARCH64_BREAK_FAULT into insn-def.h for insn.h. Patch #2 adds > > necessary encoder helpers for atomic operations. > > > > [...] > > Applied to arm64 (for-next/insn), thanks! > > [1/4] arm64: move AARCH64_BREAK_FAULT into insn-def.h > https://git.kernel.org/arm64/c/97e58e395e9c > [2/4] arm64: insn: add encoders for atomic operations > https://git.kernel.org/arm64/c/fa1114d9eba5 Daniel -- let's give this a day or so in -next, then if nothing catches fire you're more than welcome to pull this branch as a base for the rest of the series. ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220222224211.GB16976@willie-the-truck
2022-02-28bpftool: Remove redundant slashesYuntao Wang1-7/+7
Because the OUTPUT variable ends with a slash but CURDIR doesn't, to keep the _OUTPUT value consistent, we add a trailing slash to CURDIR when defining _OUTPUT variable. Since the _OUTPUT variable holds a value ending with a trailing slash, there is no need to add another one when defining BOOTSTRAP_OUTPUT and LIBBPF_OUTPUT variables. Likewise, when defining LIBBPF_INCLUDE and LIBBPF_BOOTSTRAP_INCLUDE, we shouldn't add an extra slash either for the same reason. When building libbpf, the value of the DESTDIR argument should also not end with a trailing slash. Signed-off-by: Yuntao Wang <ytcoode@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20220226163815.520133-1-ytcoode@gmail.com
2022-02-28ARM: 9182/1: mmu: fix returns from early_param() and __setup() functionsRandy Dunlap1-0/+2
early_param() handlers should return 0 on success. __setup() handlers should return 1 on success, i.e., the parameter has been handled. A return of 0 would cause the "option=value" string to be added to init's environment strings, polluting it. ../arch/arm/mm/mmu.c: In function 'test_early_cachepolicy': ../arch/arm/mm/mmu.c:215:1: error: no return statement in function returning non-void [-Werror=return-type] ../arch/arm/mm/mmu.c: In function 'test_noalign_setup': ../arch/arm/mm/mmu.c:221:1: error: no return statement in function returning non-void [-Werror=return-type] Fixes: b849a60e0903 ("ARM: make cr_alignment read-only #ifndef CONFIG_CPU_CP15") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: patches@armlinux.org.uk Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-02-28blktrace: fix use after free for struct blk_traceYu Kuai1-8/+18
When tracing the whole disk, 'dropped' and 'msg' will be created under 'q->debugfs_dir' and 'bt->dir' is NULL, thus blk_trace_free() won't remove those files. What's worse, the following UAF can be triggered because of accessing stale 'dropped' and 'msg': ================================================================== BUG: KASAN: use-after-free in blk_dropped_read+0x89/0x100 Read of size 4 at addr ffff88816912f3d8 by task blktrace/1188 CPU: 27 PID: 1188 Comm: blktrace Not tainted 5.17.0-rc4-next-20220217+ #469 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-4 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_address_description.constprop.0.cold+0xab/0x381 ? blk_dropped_read+0x89/0x100 ? blk_dropped_read+0x89/0x100 kasan_report.cold+0x83/0xdf ? blk_dropped_read+0x89/0x100 kasan_check_range+0x140/0x1b0 blk_dropped_read+0x89/0x100 ? blk_create_buf_file_callback+0x20/0x20 ? kmem_cache_free+0xa1/0x500 ? do_sys_openat2+0x258/0x460 full_proxy_read+0x8f/0xc0 vfs_read+0xc6/0x260 ksys_read+0xb9/0x150 ? vfs_write+0x3d0/0x3d0 ? fpregs_assert_state_consistent+0x55/0x60 ? exit_to_user_mode_prepare+0x39/0x1e0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fbc080d92fd Code: ce 20 00 00 75 10 b8 00 00 00 00 0f 05 48 3d 01 f0 ff ff 73 31 c3 48 83 1 RSP: 002b:00007fbb95ff9cb0 EFLAGS: 00000293 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 00007fbb95ff9dc0 RCX: 00007fbc080d92fd RDX: 0000000000000100 RSI: 00007fbb95ff9cc0 RDI: 0000000000000045 RBP: 0000000000000045 R08: 0000000000406299 R09: 00000000fffffffd R10: 000000000153afa0 R11: 0000000000000293 R12: 00007fbb780008c0 R13: 00007fbb78000938 R14: 0000000000608b30 R15: 00007fbb780029c8 </TASK> Allocated by task 1050: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 do_blk_trace_setup+0xcb/0x410 __blk_trace_setup+0xac/0x130 blk_trace_ioctl+0xe9/0x1c0 blkdev_ioctl+0xf1/0x390 __x64_sys_ioctl+0xa5/0xe0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 1050: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 __kasan_slab_free+0x103/0x180 kfree+0x9a/0x4c0 __blk_trace_remove+0x53/0x70 blk_trace_ioctl+0x199/0x1c0 blkdev_common_ioctl+0x5e9/0xb30 blkdev_ioctl+0x1a5/0x390 __x64_sys_ioctl+0xa5/0xe0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff88816912f380 which belongs to the cache kmalloc-96 of size 96 The buggy address is located 88 bytes inside of 96-byte region [ffff88816912f380, ffff88816912f3e0) The buggy address belongs to the page: page:000000009a1b4e7c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0f flags: 0x17ffffc0000200(slab|node=0|zone=2|lastcpupid=0x1fffff) raw: 0017ffffc0000200 ffffea00044f1100 dead000000000002 ffff88810004c780 raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88816912f280: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff88816912f300: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc >ffff88816912f380: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ^ ffff88816912f400: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff88816912f480: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ================================================================== Fixes: c0ea57608b69 ("blktrace: remove debugfs file dentries from struct blk_trace") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20220228034354.4047385-1-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-28net: decnet: use time_is_before_jiffies() instead of open coding itWang Qing1-1/+2
Use the helper function time_is_{before,after}_jiffies() to improve code readability. Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-28net: wan: lmc: use time_is_before_jiffies() instead of open coding itWang Qing1-1/+2
Use the helper function time_is_{before,after}_jiffies() to improve code readability. Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-28net: hamradio: use time_is_after_jiffies() instead of open coding itWang Qing1-3/+4
Use the helper function time_is_{before,after}_jiffies() to improve code readability. Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-28net: ethernet: sun: use time_is_before_jiffies() instead of open coding itWang Qing1-2/+3
Use the helper function time_is_{before,after}_jiffies() to improve code readability. Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-28net: qlcnic: use time_is_before_jiffies() instead of open coding itWang Qing1-1/+2
Use the helper function time_is_{before,after}_jiffies() to improve code readability. Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-28net: ethernet: use time_is_before_eq_jiffies() instead of open coding itWang Qing1-1/+2
Use the helper function time_is_{before,after}_jiffies() to improve code readability. Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-28bpf: Add config to allow loading modules with BTF mismatchesConnor O'Brien2-1/+12
BTF mismatch can occur for a separately-built module even when the ABI is otherwise compatible and nothing else would prevent successfully loading. Add a new Kconfig to control how mismatches are handled. By default, preserve the current behavior of refusing to load the module. If MODULE_ALLOW_BTF_MISMATCH is enabled, load the module but ignore its BTF information. Suggested-by: Yonghong Song <yhs@fb.com> Suggested-by: Michal Suchánek <msuchanek@suse.de> Signed-off-by: Connor O'Brien <connoro@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/CAADnVQJ+OVPnBz8z3vNu8gKXX42jCUqfuvhWAyCQDu8N_yqqwQ@mail.gmail.com Link: https://lore.kernel.org/bpf/20220223012814.1898677-1-connoro@google.com
2022-02-28iommu/tegra-smmu: Fix missing put_device() call in tegra_smmu_findMiaoqian Lin1-1/+3
The reference taken by 'of_find_device_by_node()' must be released when not needed anymore. Add the corresponding 'put_device()' in the error handling path. Fixes: 765a9d1d02b2 ("iommu/tegra-smmu: Fix mc errors on tegra124-nyan") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20220107080915.12686-1-linmq006@gmail.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-02-28bpf, arm64: Feed byte-offset into bpf line infoHou Tao1-0/+5
insn_to_jit_off passed to bpf_prog_fill_jited_linfo() is calculated in instruction granularity instead of bytes granularity, but BPF line info requires byte offset. bpf_prog_fill_jited_linfo() will be the last user of ctx.offset before it is freed, so convert the offset into byte-offset before calling into bpf_prog_fill_jited_linfo() in order to fix the line info dump on arm64. Fixes: 37ab566c178d ("bpf: arm64: Enable arm64 jit to provide bpf_line_info") Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220226121906.5709-3-houtao1@huawei.com
2022-02-28iommu/vt-d: Fix double list_add when enabling VMD in scalable modeAdrian Huang1-1/+1
When enabling VMD and IOMMU scalable mode, the following kernel panic call trace/kernel log is shown in Eagle Stream platform (Sapphire Rapids CPU) during booting: pci 0000:59:00.5: Adding to iommu group 42 ... vmd 0000:59:00.5: PCI host bridge to bus 10000:80 pci 10000:80:01.0: [8086:352a] type 01 class 0x060400 pci 10000:80:01.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit] pci 10000:80:01.0: enabling Extended Tags pci 10000:80:01.0: PME# supported from D0 D3hot D3cold pci 10000:80:01.0: DMAR: Setup RID2PASID failed pci 10000:80:01.0: Failed to add to iommu group 42: -16 pci 10000:80:03.0: [8086:352b] type 01 class 0x060400 pci 10000:80:03.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit] pci 10000:80:03.0: enabling Extended Tags pci 10000:80:03.0: PME# supported from D0 D3hot D3cold ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:29! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 7 Comm: kworker/0:1 Not tainted 5.17.0-rc3+ #7 Hardware name: Lenovo ThinkSystem SR650V3/SB27A86647, BIOS ESE101Y-1.00 01/13/2022 Workqueue: events work_for_cpu_fn RIP: 0010:__list_add_valid.cold+0x26/0x3f Code: 9a 4a ab ff 4c 89 c1 48 c7 c7 40 0c d9 9e e8 b9 b1 fe ff 0f 0b 48 89 f2 4c 89 c1 48 89 fe 48 c7 c7 f0 0c d9 9e e8 a2 b1 fe ff <0f> 0b 48 89 d1 4c 89 c6 4c 89 ca 48 c7 c7 98 0c d9 9e e8 8b b1 fe RSP: 0000:ff5ad434865b3a40 EFLAGS: 00010246 RAX: 0000000000000058 RBX: ff4d61160b74b880 RCX: ff4d61255e1fffa8 RDX: 0000000000000000 RSI: 00000000fffeffff RDI: ffffffff9fd34f20 RBP: ff4d611d8e245c00 R08: 0000000000000000 R09: ff5ad434865b3888 R10: ff5ad434865b3880 R11: ff4d61257fdc6fe8 R12: ff4d61160b74b8a0 R13: ff4d61160b74b8a0 R14: ff4d611d8e245c10 R15: ff4d611d8001ba70 FS: 0000000000000000(0000) GS:ff4d611d5ea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ff4d611fa1401000 CR3: 0000000aa0210001 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> intel_pasid_alloc_table+0x9c/0x1d0 dmar_insert_one_dev_info+0x423/0x540 ? device_to_iommu+0x12d/0x2f0 intel_iommu_attach_device+0x116/0x290 __iommu_attach_device+0x1a/0x90 iommu_group_add_device+0x190/0x2c0 __iommu_probe_device+0x13e/0x250 iommu_probe_device+0x24/0x150 iommu_bus_notifier+0x69/0x90 blocking_notifier_call_chain+0x5a/0x80 device_add+0x3db/0x7b0 ? arch_memremap_can_ram_remap+0x19/0x50 ? memremap+0x75/0x140 pci_device_add+0x193/0x1d0 pci_scan_single_device+0xb9/0xf0 pci_scan_slot+0x4c/0x110 pci_scan_child_bus_extend+0x3a/0x290 vmd_enable_domain.constprop.0+0x63e/0x820 vmd_probe+0x163/0x190 local_pci_probe+0x42/0x80 work_for_cpu_fn+0x13/0x20 process_one_work+0x1e2/0x3b0 worker_thread+0x1c4/0x3a0 ? rescuer_thread+0x370/0x370 kthread+0xc7/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- ... Kernel panic - not syncing: Fatal exception Kernel Offset: 0x1ca00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]--- The following 'lspci' output shows devices '10000:80:*' are subdevices of the VMD device 0000:59:00.5: $ lspci ... 0000:59:00.5 RAID bus controller: Intel Corporation Volume Management Device NVMe RAID Controller (rev 20) ... 10000:80:01.0 PCI bridge: Intel Corporation Device 352a (rev 03) 10000:80:03.0 PCI bridge: Intel Corporation Device 352b (rev 03) 10000:80:05.0 PCI bridge: Intel Corporation Device 352c (rev 03) 10000:80:07.0 PCI bridge: Intel Corporation Device 352d (rev 03) 10000:81:00.0 Non-Volatile memory controller: Intel Corporation NVMe Datacenter SSD [3DNAND, Beta Rock Controller] 10000:82:00.0 Non-Volatile memory controller: Intel Corporation NVMe Datacenter SSD [3DNAND, Beta Rock Controller] The symptom 'list_add double add' is caused by the following failure message: pci 10000:80:01.0: DMAR: Setup RID2PASID failed pci 10000:80:01.0: Failed to add to iommu group 42: -16 pci 10000:80:03.0: [8086:352b] type 01 class 0x060400 Device 10000:80:01.0 is the subdevice of the VMD device 0000:59:00.5, so invoking intel_pasid_alloc_table() gets the pasid_table of the VMD device 0000:59:00.5. Here is call path: intel_pasid_alloc_table pci_for_each_dma_alias get_alias_pasid_table search_pasid_table pci_real_dma_dev() in pci_for_each_dma_alias() gets the real dma device which is the VMD device 0000:59:00.5. However, pte of the VMD device 0000:59:00.5 has been configured during this message "pci 0000:59:00.5: Adding to iommu group 42". So, the status -EBUSY is returned when configuring pasid entry for device 10000:80:01.0. It then invokes dmar_remove_one_dev_info() to release 'struct device_domain_info *' from iommu_devinfo_cache. But, the pasid table is not released because of the following statement in __dmar_remove_one_dev_info(): if (info->dev && !dev_is_real_dma_subdevice(info->dev)) { ... intel_pasid_free_table(info->dev); } The subsequent dmar_insert_one_dev_info() operation of device 10000:80:03.0 allocates 'struct device_domain_info *' from iommu_devinfo_cache. The allocated address is the same address that is released previously for device 10000:80:01.0. Finally, invoking device_attach_pasid_table() causes the issue. `git bisect` points to the offending commit 474dd1c65064 ("iommu/vt-d: Fix clearing real DMA device's scalable-mode context entries"), which releases the pasid table if the device is not the subdevice by checking the returned status of dev_is_real_dma_subdevice(). Reverting the offending commit can work around the issue. The solution is to prevent from allocating pasid table if those devices are subdevices of the VMD device. Fixes: 474dd1c65064 ("iommu/vt-d: Fix clearing real DMA device's scalable-mode context entries") Cc: stable@vger.kernel.org # v5.14+ Signed-off-by: Adrian Huang <ahuang12@lenovo.com> Link: https://lore.kernel.org/r/20220216091307.703-1-adrianhuang0701@gmail.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20220221053348.262724-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-02-28bpf, arm64: Call build_prologue() first in first JIT passHou Tao1-5/+8
BPF line info needs ctx->offset to be the instruction offset in the whole JITed image instead of the body itself, so also call build_prologue() first in first JIT pass. Fixes: 37ab566c178d ("bpf: arm64: Enable arm64 jit to provide bpf_line_info") Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220226121906.5709-2-houtao1@huawei.com
2022-02-28drm/i915: s/JSP2/ICP2/ PCHVille Syrjälä2-2/+2
This JSP2 PCH actually seems to be some special Apple specific ICP variant rather than a JSP. Make it so. Or at least all the references to it seem to be some Apple ICL machines. Didn't manage to find these PCI IDs in any public chipset docs unfortunately. The only thing we're losing here with this JSP->ICP change is Wa_14011294188, but based on the HSD that isn't actually needed on any ICP based design (including JSP), only TGP based stuff (including MCC) really need it. The documented w/a just never made that distinction because Windows didn't want to differentiate between JSP and MCC (not sure how they handle hpd/ddc/etc. then though...). Cc: stable@vger.kernel.org Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Vivek Kasireddy <vivek.kasireddy@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4226 Fixes: 943682e3bd19 ("drm/i915: Introduce Jasper Lake PCH") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220224132142.12927-1-ville.syrjala@linux.intel.com Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Tested-by: Tomas Bzatek <bugs@bzatek.net> (cherry picked from commit 53581504a8e216d435f114a4f2596ad0dfd902fc) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-02-28drm/i915/guc/slpc: Correct the param count for unset paramVinay Belgaumkar1-1/+1
SLPC unset param H2G only needs one parameter - the id of the param. Fixes: 025cb07bebfa ("drm/i915/guc/slpc: Cache platform frequency limits") Suggested-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220216181504.7155-1-vinay.belgaumkar@intel.com (cherry picked from commit 9648f1c3739505557d94ff749a4f32192ea81fe3) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-02-28net: phylink: remove phylink_set_pcs()Russell King (Oracle)2-33/+12
As all users of phylink_set_pcs() have now been updated to use the mac_select_pcs() method, it can be removed from the phylink kernel API and its functionality moved into phylink_major_config(). Removing phylink_set_pcs() gives us a single approach for attaching a PCS within phylink. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-28net: dsa: felix: remove prevalidate_phy_mode interfaceColin Foster4-48/+63
All users of the felix driver were creating their own prevalidate_phy_mode function. The same logic can be performed in a more general way by using a simple array of bit fields. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-28net: ipa: fix a build dependencyAlex Elder1-0/+1
An IPA build problem arose in the linux-next tree the other day. The problem is that a recent commit adds a new dependency on some code, and the Kconfig file for IPA doesn't reflect that dependency. As a result, some configurations can fail to build (particularly when COMPILE_TEST is enabled). The recent patch adds calls to qmp_get(), qmp_put(), and qmp_send(), and those are built based on the QCOM_AOSS_QMP config option. If that symbol is not defined, stubs are defined, so we just need to ensure QCOM_AOSS_QMP is compatible with QCOM_IPA, or it's not defined. Reported-by: Randy Dunlap <rdunlap@infradead.org> Fixes: 34a081761e4e3 ("net: ipa: request IPA register values be retained") Signed-off-by: Alex Elder <elder@linaro.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-28ionic: no transition while stoppingShannon Nelson1-5/+9
Make sure we don't try to transition the fw_status_ready while we're still in the FW_STOPPING state, else we can get stuck in limbo waiting on a transition that already happened. While we're here we can remove a superfluous check on the lif pointer. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-28net/sysctl: avoid two synchronize_rcu() callsEric Dumazet1-4/+2
Both rps_sock_flow_sysctl() and flow_limit_cpu_sysctl() are using synchronize_rcu() right before freeing memory either by vfree() or kfree() They can switch to kvfree_rcu(ptr) and kfree_rcu(ptr) to benefit from asynchronous mode, instead of blocking the current thread. Note that kvfree_rcu(ptr) and kfree_rcu(ptr) eventually can have to use synchronize_rcu() in some memory pressure cases. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-28net: netsec: enable pp skb recyclingLorenzo Bianconi1-1/+1
Similar to mvneta or mvpp2, enable page_pool skb recycling for netsec dirver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-28atm: firestream: check the return value of ioremap() in fs_init()Jia-Ju Bai1-0/+2
The function ioremap() in fs_init() can fail, so its return value should be checked. Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-28net: sparx5: Add #include to remove warningCasper Andersson1-0/+2
main.h uses NUM_TARGETS from main_regs.h, but the missing include never causes any errors because everywhere main.h is (currently) included, main_regs.h is included before. But since it is dependent on main_regs.h it should always be included. Signed-off-by: Casper Andersson <casper.casan@gmail.com> Reviewed-by: Joacim Zetterling <joacim.zetterling@westermo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-28net/smc: Call trace_smc_tx_sendmsg when data corkedTony Lu1-9/+8
This also calls trace_smc_tx_sendmsg() even if data is corked. For ease of understanding, if statements are not expanded here. Link: https://lore.kernel.org/all/f4166712-9a1e-51a0-409d-b7df25a66c52@linux.ibm.com/ Fixes: 139653bc6635 ("net/smc: Remove corked dealyed work") Suggested-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-28net/smc: Fix cleanup when register ULP failsTony Lu1-1/+3
This patch calls smc_ib_unregister_client() when tcp_register_ulp() fails, and make sure to clean it up. Fixes: d7cd421da9da ("net/smc: Introduce TCP ULP support") Signed-off-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-28arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpointNícolas F. R. A. Prado1-0/+2
mt8183-kukui-jacuzzi has an anx7625 bridge connected to the output of its DSI host. However, after commit fd0310b6fe7d ("drm/bridge: anx7625: add MIPI DPI input feature"), a bus-type property started being required in the endpoint node by the driver to indicate whether it is DSI or DPI. Add the missing bus-type property and set it to 5 (V4L2_FWNODE_BUS_TYPE_PARALLEL) so that the driver has its input configured to DSI and the display pipeline can probe correctly. While at it, also set the data-lanes property that was also introduced in that same commit, so that we don't rely on the default value. Fixes: fd0310b6fe7d ("drm/bridge: anx7625: add MIPI DPI input feature") Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20220214200507.2500693-1-nfraprado@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2022-02-28Merge branch 'flow_offload-tc-police-parameters'David S. Miller14-38/+454
Jianbo Liu says: ==================== flow_offload: add tc police parameters As a preparation for more advanced police offload in mlx5 (e.g., jumping to another chain when bandwidth is not exceeded), extend the flow offload API with more tc-police parameters. Adjust existing drivers to reject unsupported configurations. Changes since v2: * Rename index to extval in exceed and notexceed acts. * Add policer validate functions for all drivers. Changes since v1: * Add one more strict validation for the control of drop/ok. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-28flow_offload: reject offload for all drivers with invalid police parametersJianbo Liu12-38/+369
As more police parameters are passed to flow_offload, driver can check them to make sure hardware handles packets in the way indicated by tc. The conform-exceed control should be drop/pipe or drop/ok. Besides, for drop/ok, the police should be the last action. As hardware can't configure peakrate/avrate/overhead, offload should not be supported if any of them is configured. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-28net: flow_offload: add tc police action parametersJianbo Liu3-0/+85
The current police offload action entry is missing exceed/notexceed actions and parameters that can be configured by tc police action. Add the missing parameters as a pre-step for offloading police actions to hardware. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-04 02:02:51 +0300