summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-10-10arm64: dts: renesas: eagle: add EtherAVB supportSergei Shtylyov1-1/+13
Define the Eagle board dependent part of the EtherAVB device node. Enable DHCP and NFS root for the kernel booting. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-10arm64: dts: r8a77995: Add INTC-EX device nodeGeert Uytterhoeven1-0/+16
Add a device node for the Interrupt Controller for External Devices (INTC-EX) on R-Car D3, which serves external IRQ pins IRQ[0-5]. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-10arm64: dts: r8a77970: Add INTC-EX device nodeGeert Uytterhoeven1-0/+16
Add a device node for the Interrupt Controller for External Devices (INTC-EX) on R-Car V3M, which serves external IRQ pins IRQ[0-5]. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-10arm64: dts: r8a7796: Add INTC-EX device nodeGeert Uytterhoeven1-0/+16
Add a device node for the Interrupt Controller for External Devices (INTC-EX) on R-Car M3-W, which serves external IRQ pins IRQ[0-5]. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-10arm64: dts: ulcb-kf: hog USB3 hub control gpiosVladimir Barinov1-0/+14
This adds gpio hogs for USB3 hub on ULCB Kingfisher board to power up and remove from reset the hub Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-10arm64: dts: ulcb-kf: enable PCA9548 on I2C4Vladimir Barinov1-0/+8
This supports PCA9548 I2C switch on I2C4 bus on ULCB Kingfisher board Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-10arm64: dts: ulcb-kf: enable PCA9548 on I2C2Vladimir Barinov1-0/+8
This supports PCA9548 I2C switch on I2C2 bus on ULCB Kingfisher board Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-10arm64: dts: ulcb-kf: enable TCA9539 on I2C4Vladimir Barinov1-0/+22
This supports TCA9539 gpio expanders on I2C4 bus on ULCB Kingfisher board Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-10arm64: dts: ulcb-kf: enable TCA9539 on I2C2Vladimir Barinov1-0/+22
This supports TCA9539 gpio expanders on I2C2 bus on ULCB Kingfisher board Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-10arm64: dts: ulcb-kf: enable USB3.0 HostVladimir Barinov1-0/+4
This supports USB3.0 Host on ULCB Kingfisher board Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-10arm64: dts: ulcb-kf: enable PCIE0/1Vladimir Barinov1-0/+12
This supports PCIE0/1 on ULCB Kingfisher board Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-10arm64: dts: ulcb-kf: enable USB2.0 Host channel 0Vladimir Barinov1-0/+8
This supports USB2.0 Host channel 0 on ULCB Kingfisher board Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-10arm64: dts: ulcb-kf: enable HSUSBVladimir Barinov1-0/+4
This supports HSUSB on ULCB Kingfisher board Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-10arm64: dts: ulcb-kf: enable CAN0/1Vladimir Barinov1-0/+22
This supports CAN0/1 on ULCB Kingfisher board Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-10arm64: dts: ulcb-kf: enable SCIF1Vladimir Barinov1-0/+14
This supports SCIF1 on ULCB Kingfisher board Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-10arm64: dts: h3ulcb-kf: ES2.0+ SoC initial device treeVladimir Barinov2-0/+20
Add the initial device tree for the H3ULCB ES2.0+ SoC with Kingfisher extension infotainment board. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-10arm64: dts: h3ulcb-kf: ES1.x SoC initial device treeVladimir Barinov2-0/+20
Add the initial device tree for the H3ULCB ES1.x SoC with Kingfisher extension infotainment board. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-10arm64: dts: m3ulcb-kf: initial device treeVladimir Barinov2-0/+20
Add the initial device tree for the M3ULCB with Kingfisher extension infotainment board. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-10arm64: dts: ulcb-kf: initial device treeVladimir Barinov1-0/+31
Add the initial common dtsi file for Kingfisher infotainment board (R-Car Starter Kit extension) This commit supports the following peripherals: - HSCIF0 Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-10arm64: dts: renesas: r8a77995: draak: enable PWM channel 0 and 1Yoshihiro Shimoda1-0/+24
This patch enables PWM channel 0 and 1 on the draak. Each channel connects to LTC2644 for brightness control. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-10arm64: dts: renesas: r8a77995: add PWM device nodesYoshihiro Shimoda1-0/+40
This patch adds PWM device nodes for r8a77995. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-10arm64: dts: renesas: salvator-common: add pfc node for USB3.0 channel 0Yoshihiro Shimoda1-0/+8
Since a R-Car Gen3 bootloader enables the PFC of USB3.0 channel 0, the USB3.0 host controller works without this setting on the kernel. But, this setting should have salvator-common.dtsi. So, this patch adds the pfc node for USB3.0 channel 0. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-05arm64: dts: renesas: initial Eagle board device treeSergei Shtylyov2-0/+46
Add the initial device tree for the R8A77970 SoC based Eagle board. The board has 1 debug serial port (SCIF0); include support for it, so that the serial console can work. Based on the original (and large) patch by Vladimir Barinov <vladimir.barinov@cogentembedded.com>. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-03arm64: dts: renesas: r8a77995: draak: drop "avb_phy_int" from avb_pinsYoshihiro Shimoda1-2/+1
Since the Ethernet AVB driver doesn't support AVB_PHY_INT handling and it will be handled by a phy driver as a gpio pin, this patch removes the "avb_phy_int" from the avb_pins node. Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Fixes: 4503b50eac08 ("arm64: dts: renesas: r8a77995: draak: enable EthernetAVB") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-03arm64: dts: renesas: ulcb: drop "avb_phy_int" from avb_pinsYoshihiro Shimoda1-2/+1
Since the Ethernet AVB driver doesn't support AVB_PHY_INT handling and it will be handled by a phy driver as a gpio pin, this patch removes the "avb_phy_int" from the avb_pins node. Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Fixes: 133ace3f3804 ("arm64: dts: ulcb: Set drive-strength for ravb pins") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-03arm64: dts: renesas: salvator-common: drop "avb_phy_int" from avb_pinsYoshihiro Shimoda1-2/+1
Since the Ethernet AVB driver doesn't support AVB_PHY_INT handling and it will be handled by a phy driver as a gpio pin, this patch removes the "avb_phy_int" from the avb_pins node. Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Fixes: 7d73a4da2681 ("arm64: dts: r8a7795: salvator-x: Set drive-strength for ravb pins") Fixes: 4903987033be ("arm64: dts: r8a7796: salvator-x: Set drive-strength for ravb pins") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-25arm64: dts: renesas: r8a7796: add USB3.0 peripheral device nodeYoshihiro Shimoda1-0/+11
This patch adds USB3.0 peripheral channel 0 device node for r8a7796. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-25arm64: dts: renesas: r8a7795: add USB3.0 peripheral device nodeYoshihiro Shimoda1-0/+11
This patch adds USB3.0 peripheral channel 0 device node for r8a7795. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-25arm64: dts: renesas: r8a77995: draak: enable EthernetAVBYoshihiro Shimoda1-0/+25
This patch enables EthernetAVB for R-Car D3 draak board. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-25arm64: dts: renesas: r8a77995: draak: enable USB2.0 Host (EHCI/OHCI)Yoshihiro Shimoda1-0/+8
This patch enables USB2.0 Host (EHCI/OHCI) for r8a77995. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-21arm64: dts: renesas: r8a77995: draak: enable USB2.0 PHYYoshihiro Shimoda1-0/+11
This patch enables USB2.0 PHY for R-Car D3 draak board. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-21arm64: dts: renesas: r8a77995: add USB2.0 Host (EHCI/OHCI) device nodeYoshihiro Shimoda1-0/+25
This patch adds USB2.0 Host (EHCI/OHCI) device node for r8a77995. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-21arm64: dts: renesas: r8a77995: Add USB2.0 PHY device nodeYoshihiro Shimoda1-0/+12
This patch adds USB2.0 PHY device node for r8a77995. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-19arm64: dts: draak: Add serial console pinsGeert Uytterhoeven1-0/+11
Add pin control for SCIF2. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-18arm64: dts: renesas: r8a77970: add EtherAVB supportSergei Shtylyov1-0/+44
Define the generic R8A77970 part of the EtherAVB device node. Based on the original (and large) patch by Daisuke Matsushita <daisuke.matsushita.ns@hitachi.com>. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-18arm64: dts: renesas: r8a77970: add [H]SCIF supportSergei Shtylyov1-0/+149
Describe [H]SCIF ports in the R8A77970 device tree. Based on the original (and large) patch by Daisuke Matsushita <daisuke.matsushita.ns@hitachi.com>. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-18arm64: dts: renesas: r8a77970: add SYS-DMAC supportSergei Shtylyov1-0/+48
Describe SYS-DMAC1/2 in the R8A77970 device tree. Based on the original (and large) patch by Daisuke Matsushita <daisuke.matsushita.ns@hitachi.com>. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-18arm64: dts: renesas: initial R8A77970 SoC device treeSergei Shtylyov1-0/+125
The initial R8A77970 SoC device tree including Cortex-A53 CPU, GIC, timer, CPG, RST, and SYSC. Based on the original (and large) patch by Daisuke Matsushita <daisuke.matsushita.ns@hitachi.com>. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-18arm64: dts: renesas: r8a77995: Add EthernetAVB device nodeYoshihiro Shimoda1-0/+45
This patch adds EthernetAVB device node for r8a77995. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-18arm64: dts: renesas: r8a77995: add GPIO device nodesYoshihiro Shimoda1-0/+112
This patch adds GPIO device nodes for r8a77995. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-18arm64: dts: renesas: r8a77995: Use r8a7795-cpg-mssr binding definitionsGeert Uytterhoeven1-2/+2
Replace the hardcoded clock indices by R8A77995_CLK_* symbols. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-18arm64: dts: renesas: r8a77995: Use r8a7795-sysc binding definitionsGeert Uytterhoeven1-5/+6
Replace the hardcoded power domain indices by R8A77995_PD_* symbols. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-18arm64: renesas: Add Renesas R8A77970 Kconfig supportGeert Uytterhoeven1-0/+6
Add a configuration option for the R-Car V3M SoC. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-18arm64: dts: renesas: r8a7795: Drop bogus HDMI node names suffixesGeert Uytterhoeven1-2/+2
Node names should not use numerical suffixes if the nodes can be distinguished by unit-address. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-18arm64: dts: renesas: ulcb: Enable display outputLaurent Pinchart1-0/+4
The DU is already wired up to the HDMI encoder, all we need to do is enable it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-18arm64: dts: renesas: r8a77995: update PFC node name to pin-controllerYoshihiro Shimoda1-1/+1
This patch changes the name from from e6060000.pfc and pfc@e6060000 to e6060000.pin-controller and pin-controller@e6060000 like other Renesas SoCs. Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-18arm64: dts: renesas: r8a7796: Add FDP1 instanceLaurent Pinchart1-0/+10
The r8a7796 has a single FDP1 instance. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-18arm64: dts: renesas: r8a7795-es1: Drop extra zero from usb unit addressGeert Uytterhoeven1-1/+1
With W=1: arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/usb@ee0400000 simple-bus unit address format error, expected "ee040000" arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dtb: Warning (simple_bus_reg): Node /soc/usb@ee0400000 simple-bus unit address format error, expected "ee040000" Fixes: 291e0c4994d0813f ("arm64: dts: r8a7795: Add support for R-Car H3 ES2.0") Fixes: 171f2ef82284f61b ("arm64: dts: r8a7795: Add USB3.0 host device nodes") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-17Linux 4.14-rc1v4.14-rc1Linus Torvalds1-2/+2
2017-09-16Merge tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds4-16/+16
Pull UBI updates from Richard Weinberger: "Minor improvements" * tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifs: UBI: Fix two typos in comments ubi: fastmap: fix spelling mistake: "invalidiate" -> "invalidate" ubi: pr_err() strings should end with newlines ubi: pr_err() strings should end with newlines ubi: pr_err() strings should end with newlines
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 15:10:55 +0300