| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Merge series from Longbin Li <looong.bin@gmail.com>:
Add SPI NOR driver for Sophgo, including read, write operations.
This driver is only suitable for NOR flash.
|
|
The ECC_CFG_ECC_DISABLE define is BIT(0). It's supposed to be used
directly instead of used as a shifter.
Fixes: 7304d1909080 ("spi: spi-qpic: add driver for QCOM SPI NAND flash Interface")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/2f4b0a0b-2c03-41c0-8a4a-3d789a83832d@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Enable Quality of Service(QoS) support to speed up interrupt service
routine handle. Sometimes, a gic interrupt will be generated after
SPI transmission, but at this time the CPU is in an idle state and the
processing handler will be very slow. It takes time to exit the idle state
and then become active. This will cause the SPI handler to execute slowly
and cause SPI transfer timeouts.
Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Link: https://patch.msgid.link/20250304024045.7788-1-leilk.liu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for SG2044 SPI NOR controller in Sophgo SoC.
Signed-off-by: Longbin Li <looong.bin@gmail.com>
Link: https://patch.msgid.link/20250304083548.10101-3-looong.bin@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add SPI NOR driver for SG2044, including read, write operations.
Signed-off-by: Longbin Li <looong.bin@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250304083548.10101-2-looong.bin@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add compatible string "fsl,imx94-spi" for the i.MX94 chip, which is
backward compatible with i.MX7ULP. Set it to fall back to
"fsl,imx7ulp-spi".
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250306170954.242707-1-Frank.Li@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The print function dev_err() is redundant because platform_get_irq()
already prints an error.
./drivers/spi/spi-stm32-ospi.c:798:2-9: line 798 is redundant because platform_get_irq() already prints an error.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=19220
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://patch.msgid.link/20250306024716.27856-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The devm_ioremap() function returns NULL on error, it doesn't return
error pointers. Fix the check to match.
Fixes: 79b8a705e26c ("spi: stm32: Add OSPI driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://patch.msgid.link/bc4c9123-df43-4616-962f-765801d30b4c@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from patrice.chotard@foss.st.com:
This series adds SPI NOR support for STM32MP25 SoCs from STMicroelectronics.
On STM32MP25 SoCs family, an Octo Memory Manager block manages the muxing,
the memory area split, the chip select override and the time constraint
between its 2 Octo SPI children.
Due to these depedencies, this series adds support for:
- Octo Memory Manager driver (not applied for SPI).
- Octo SPI driver.
- yaml schema for Octo Memory Manager and Octo SPI drivers.
The device tree files adds Octo Memory Manager and its 2 associated Octo
SPI chidren in stm32mp251.dtsi and adds SPI NOR support in stm32mp257f-ev1
board.
|
|
This driver implements support for the SPI-NAND mode of QCOM NAND Flash
Interface as a SPI-MEM controller with pipelined ECC capability.
Co-developed-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Link: https://patch.msgid.link/20250224111414.2809669-3-quic_mdalam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document the QPIC-SPI-NAND flash controller present in the IPQ SoCs.
It can work both in serial and parallel mode and supports typical
SPI-NAND page cache operations.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Link: https://patch.msgid.link/20250224111414.2809669-2-quic_mdalam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add STM32 OSPI driver, it supports :
- support sNOR / sNAND devices.
- Three functional modes: indirect, automatic-status polling,
memory-mapped.
- Single-, dual-, quad-, and octal-SPI communication.
- Dual-quad communication.
- Single data rate (SDR).
- DMA channel for indirect mode.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://patch.msgid.link/20250219080059.367045-3-patrice.chotard@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add device tree bindings for the STM32 OSPI controller.
Main features of the Octo-SPI controller :
- support sNOR / sNAND / HyperRAM™ and HyperFlash™ devices.
- Three functional modes: indirect, automatic-status polling,
memory-mapped.
- Up to 4 Gbytes of external memory can be addressed in indirect
mode (per physical port and per CS), and up to 256 Mbytes in
memory-mapped mode (combined for both physical ports and per CS).
- Single-, dual-, quad-, and octal-SPI communication.
- Dual-quad communication.
- Single data rate (SDR) and double transfer rate (DTR).
- Maximum target frequency is 133 MHz for SDR and 133 MHz for DTR.
- Data strobe support.
- DMA channel for indirect mode.
- Double CS mapping that allows two external flash devices to be
addressed with a single OCTOSPI controller mapped on a single
OCTOSPI port.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250219080059.367045-2-patrice.chotard@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add rockchip,rk3562-spi compatible for rk3562.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20250227111913.2344207-8-kever.yang@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies
+secs_to_jiffies
(E
- * \( 1000 \| MSEC_PER_SEC \)
)
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250225-converge-secs-to-jiffies-part-two-v3-13-a43967e36c88@linux.microsoft.com
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies
+secs_to_jiffies
(E
- * \( 1000 \| MSEC_PER_SEC \)
)
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Link: https://patch.msgid.link/20250225-converge-secs-to-jiffies-part-two-v3-12-a43967e36c88@linux.microsoft.com
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
fsl-spi.txt contains the bindings for the fsl,spi and fsl,espi
contollers. Convert them to YAML.
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Link: https://patch.msgid.link/20250220-ppcyaml-spi-v3-1-e340613c7875@posteo.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The FIFO depth specified with the compatibles's data is used where all
the instances of the IP define the same FIFO depth. It naturally has
higher precedence than the FIFO depth specified via DT. Specifying FIFO
depth in DT becomes superfluous in this case. Extend comment about
compatible's FIFO depth.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://patch.msgid.link/20250214-spi-s3c64xx-fifo-depth-v1-1-e1b1915e3ee7@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 8e02d1886988 ("spi: add basic support for SPI offloading") adds a
new MAINTAINERS section referring to the non-existent file
include/linux/spi/spi-offload.h rather than referring to the files added
with this commit in the directory include/linux/spi/offload/.
Adjust the file reference to the intended directory.
Fixes: 8e02d1886988 ("spi: add basic support for SPI offloading")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250217092851.17619-1-lukas.bulwahn@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix annoying logs when building tools in parallel
- Fix the Debian linux-headers package build again
- Fix the target triple detection for userspace programs on Clang
* tag 'kbuild-fixes-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: Fix a few typos in a comment
kbuild: userprogs: fix bitsize and target detection on clang
kbuild: fix linux-headers package build when $(CC) cannot link userspace
tools: fix annoying "mkdir -p ..." logs when building tools in parallel
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core api addition from Greg KH:
"Here is a driver core new api for 6.14-rc3 that is being added to
allow platform devices from stop being abused.
It adds a new 'faux_device' structure and bus and api to allow almost
a straight or simpler conversion from platform devices that were not
really a platform device. It also comes with a binding for rust, with
an example driver in rust showing how it's used.
I'm adding this now so that the patches that convert the different
drivers and subsystems can all start flowing into linux-next now
through their different development trees, in time for 6.15-rc1.
We have a number that are already reviewed and tested, but adding
those conversions now doesn't seem right. For now, no one is using
this, and it passes all build tests from 0-day and linux-next, so all
should be good"
* tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
rust/kernel: Add faux device bindings
driver core: add a faux bus for use when a simple device/bus is needed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are some small serial driver fixes for some reported problems.
Nothing major, just:
- sc16is7xx irq check fix
- 8250 fifo underflow fix
- serial_port and 8250 iotype fixes
Most of these have been in linux-next already, and all have passed
0-day testing"
* tag 'tty-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250: Fix fifo underflow on flush
serial: 8250_pnp: Remove unneeded ->iotype assignment
serial: 8250_platform: Remove unneeded ->iotype assignment
serial: 8250_of: Remove unneeded ->iotype assignment
serial: port: Make ->iotype validation global in __uart_read_properties()
serial: port: Always update ->iotype in __uart_read_properties()
serial: port: Assign ->iotype correctly when ->iobase is set
serial: sc16is7xx: Fix IRQ number check behavior
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes, and new device ids, for
6.14-rc3. Lots of tiny stuff for reported problems, including:
- new device ids and quirks
- usb hub crash fix found by syzbot
- dwc2 driver fix
- dwc3 driver fixes
- uvc gadget driver fix
- cdc-acm driver fixes for a variety of different issues
- other tiny bugfixes
Almost all of these have been in linux-next this week, and all have
passed 0-day testing"
* tag 'usb-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
usb: typec: tcpm: PSSourceOffTimer timeout in PR_Swap enters ERROR_RECOVERY
usb: roles: set switch registered flag early on
usb: gadget: uvc: Fix unstarted kthread worker
USB: quirks: add USB_QUIRK_NO_LPM quirk for Teclast dist
usb: gadget: core: flush gadget workqueue after device removal
USB: gadget: f_midi: f_midi_complete to call queue_work
usb: core: fix pipe creation for get_bMaxPacketSize0
usb: dwc3: Fix timeout issue during controller enter/exit from halt state
USB: Add USB_QUIRK_NO_LPM quirk for sony xperia xz1 smartphone
USB: cdc-acm: Fill in Renesas R-Car D3 USB Download mode quirk
usb: cdc-acm: Fix handling of oversized fragments
usb: cdc-acm: Check control transfer buffer size before access
usb: xhci: Restore xhci_pci support for Renesas HCs
USB: pci-quirks: Fix HCCPARAMS register error for LS7A EHCI
USB: serial: option: drop MeiG Smart defines
USB: serial: option: fix Telit Cinterion FN990A name
USB: serial: option: add Telit Cinterion FN990B compositions
USB: serial: option: add MeiG Smart SLM828
usb: gadget: f_midi: fix MIDI Streaming descriptor lengths
usb: dwc2: gadget: remove of_node reference upon udc_stop
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq Kconfig cleanup from Borislav Petkov:
- Remove an unused config item GENERIC_PENDING_IRQ_CHIPFLAGS
* tag 'irq_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Remove unused CONFIG_GENERIC_PENDING_IRQ_CHIPFLAGS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fixes from Borislav Petkov:
- Explicitly clear DEBUGCTL.LBR to prevent LBRs continuing being
enabled after handoff to the OS
- Check CPUID(0x23) leaf and subleafs presence properly
- Remove the PEBS-via-PT feature from being supported on hybrid systems
- Fix perf record/top default commands on systems without a raw PMU
registered
* tag 'perf_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Ensure LBRs are disabled when a CPU is starting
perf/x86/intel: Fix ARCH_PERFMON_NUM_COUNTER_LEAF
perf/x86/intel: Clean up PEBS-via-PT on hybrid
perf/x86/rapl: Fix the error checking order
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Clarify what happens when a task is woken up from the wake queue and
make clear its removal from that queue is atomic
* tag 'sched_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Clarify wake_up_q()'s write to task->wake_q.next
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Move a warning about a lld.ld breakage into the verbose setting as
said breakage has been fixed in the meantime
- Teach objtool to ignore dangling jump table entries added by Clang
* tag 'objtool_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Move dodgy linker warn to verbose
objtool: Ignore dangling jump table entries
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Large set of fixes for vector handling, especially in the
interactions between host and guest state.
This fixes a number of bugs affecting actual deployments, and
greatly simplifies the FP/SIMD/SVE handling. Thanks to Mark Rutland
for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours
- Fix use of kernel VAs at EL2 when emulating timers with nVHE
- Small set of pKVM improvements and cleanups
x86:
- Fix broken SNP support with KVM module built-in, ensuring the PSP
module is initialized before KVM even when the module
infrastructure cannot be used to order initcalls
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being
emulated by KVM to fix a NULL pointer dereference
- Enter guest mode (L2) from KVM's perspective before initializing
the vCPU's nested NPT MMU so that the MMU is properly tagged for
L2, not L1
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as
the guest's value may be stale if a VM-Exit is handled in the
fastpath"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
x86/sev: Fix broken SNP support with KVM module built-in
KVM: SVM: Ensure PSP module is initialized if KVM module is built-in
crypto: ccp: Add external API interface for PSP module initialization
KVM: arm64: vgic: Hoist SGI/PPI alloc from vgic_init() to kvm_create_vgic()
KVM: arm64: timer: Drop warning on failed interrupt signalling
KVM: arm64: Fix alignment of kvm_hyp_memcache allocations
KVM: arm64: Convert timer offset VA when accessed in HYP code
KVM: arm64: Simplify warning in kvm_arch_vcpu_load_fp()
KVM: arm64: Eagerly switch ZCR_EL{1,2}
KVM: arm64: Mark some header functions as inline
KVM: arm64: Refactor exit handlers
KVM: arm64: Refactor CPTR trap deactivation
KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN
KVM: arm64: Remove VHE host restore of CPACR_EL1.ZEN
KVM: arm64: Remove host FPSIMD saving for non-protected KVM
KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state
KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop
KVM: nSVM: Enter guest mode before initializing nested NPT MMU
KVM: selftests: Add CPUID tests for Hyper-V features that need in-kernel APIC
KVM: selftests: Manage CPUID array in Hyper-V CPUID test's core helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
"Fix for o32 ptrace/get_syscall_info"
* tag 'mips-fixes_6.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: fix mips_get_syscall_arg() for o32
MIPS: Export syscall stack arguments properly for remote use
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Add bindings for QCom QCS8300 clocks, QCom SAR2130P qfprom, and
powertip,{st7272|hx8238a} displays
- Fix compatible for TI am62a7 dss
- Add a kunit test for __of_address_resource_bounds()
* tag 'devicetree-fixes-for-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: display: Add powertip,{st7272|hx8238a} as DT Schema description
dt-bindings: nvmem: qcom,qfprom: Add SAR2130P compatible
dt-bindings: display: ti: Fix compatible for am62a7 dss
of: address: Add kunit test for __of_address_resource_bounds()
dt-bindings: clock: qcom: Add QCS8300 video clock controller
dt-bindings: clock: qcom: Add CAMCC clocks for QCS8300
dt-bindings: clock: qcom: Add GPU clocks for QCS8300
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML fixes from Richard Weinberger:
- Align signal stack correctly
- Convert to raw spinlocks where needed (irq and virtio)
- FPU related fixes
* tag 'uml-for-linus-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: convert irq_lock to raw spinlock
um: virtio_uml: use raw spinlock
um: virt-pci: don't use kmalloc()
um: fix execve stub execution on old host OSs
um: properly align signal stack on x86_64
um: avoid copying FP state from init_task
um: add back support for FXSAVE registers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull trace ring buffer fixes from Steven Rostedt:
- Enable resize on mmap() error
When a process mmaps a ring buffer, its size is locked and resizing
is disabled. But if the user passes in a wrong parameter, the mmap()
can fail after the resize was disabled and the mmap() exits with
error without reenabling the ring buffer resize. This prevents the
ring buffer from ever being resized after that. Reenable resizing of
the ring buffer on mmap() error.
- Have resizing return proper error and not always -ENOMEM
If the ring buffer is mmapped by one task and another task tries to
resize the buffer it will error with -ENOMEM. This is confusing to
the user as there may be plenty of memory available. Have it return
the error that actually happens (in this case -EBUSY) where the user
can understand why the resize failed.
- Test the sub-buffer array to validate persistent memory buffer
On boot up, the initialization of the persistent memory buffer will
do a validation check to see if the content of the data is valid, and
if so, it will use the memory as is, otherwise it re-initializes it.
There's meta data in this persistent memory that keeps track of which
sub-buffer is the reader page and an array that states the order of
the sub-buffers. The values in this array are indexes into the
sub-buffers. The validator checks to make sure that all the entries
in the array are within the sub-buffer list index, but it does not
check for duplications.
While working on this code, the array got corrupted and had
duplicates, where not all the sub-buffers were accounted for. This
passed the validator as all entries were valid, but the link list was
incorrect and could have caused a crash. The corruption only produced
incorrect data, but it could have been more severe. To fix this,
create a bitmask that covers all the sub-buffer indexes and set it to
all zeros. While iterating the array checking the values of the array
content, have it set a bit corresponding to the index in the array.
If the bit was already set, then it is a duplicate and mark the
buffer as invalid and reset it.
- Prevent mmap()ing persistent ring buffer
The persistent ring buffer uses vmap() to map the persistent memory.
Currently, the mmap() logic only uses virt_to_page() to get the page
from the ring buffer memory and use that to map to user space. This
works because a normal ring buffer uses alloc_page() to allocate its
memory. But because the persistent ring buffer use vmap() it causes a
kernel crash.
Fixing this to work with vmap() is not hard, but since mmap() on
persistent memory buffers never worked, just have the mmap() return
-ENODEV (what was returned before mmap() for persistent memory ring
buffers, as they never supported mmap. Normal buffers will still
allow mmap(). Implementing mmap() for persistent memory ring buffers
can wait till the next merge window.
- Fix polling on persistent ring buffers
There's a "buffer_percent" option (default set to 50), that is used
to have reads of the ring buffer binary data block until the buffer
fills to that percentage. The field "pages_touched" is incremented
every time a new sub-buffer has content added to it. This field is
used in the calculations to determine the amount of content is in the
buffer and if it exceeds the "buffer_percent" then it will wake the
task polling on the buffer.
As persistent ring buffers can be created by the content from a
previous boot, the "pages_touched" field was not updated. This means
that if a task were to poll on the persistent buffer, it would block
even if the buffer was completely full. It would block even if the
"buffer_percent" was zero, because with "pages_touched" as zero, it
would be calculated as the buffer having no content. Update
pages_touched when initializing the persistent ring buffer from a
previous boot.
* tag 'trace-ring-buffer-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Update pages_touched to reflect persistent buffer content
tracing: Do not allow mmap() of persistent ring buffer
ring-buffer: Validate the persistent meta data subbuf array
tracing: Have the error of __tracing_resize_ring_buffer() passed to user
ring-buffer: Unlock resize on mmap error
|
|
The pages_touched field represents the number of subbuffers in the ring
buffer that have content that can be read. This is used in accounting of
"dirty_pages" and "buffer_percent" to allow the user to wait for the
buffer to be filled to a certain amount before it reads the buffer in
blocking mode.
The persistent buffer never updated this value so it was set to zero, and
this accounting would take it as it had no content. This would cause user
space to wait for content even though there's enough content in the ring
buffer that satisfies the buffer_percent.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20250214123512.0631436e@gandalf.local.home
Fixes: 5f3b6e839f3ce ("ring-buffer: Validate boot range memory events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When trying to mmap a trace instance buffer that is attached to
reserve_mem, it would crash:
BUG: unable to handle page fault for address: ffffe97bd00025c8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 2862f3067 P4D 2862f3067 PUD 0
Oops: Oops: 0000 [#1] PREEMPT_RT SMP PTI
CPU: 4 UID: 0 PID: 981 Comm: mmap-rb Not tainted 6.14.0-rc2-test-00003-g7f1a5e3fbf9e-dirty #233
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:validate_page_before_insert+0x5/0xb0
Code: e2 01 89 d0 c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 <48> 8b 46 08 a8 01 75 67 66 90 48 89 f0 8b 50 34 85 d2 74 76 48 89
RSP: 0018:ffffb148c2f3f968 EFLAGS: 00010246
RAX: ffff9fa5d3322000 RBX: ffff9fa5ccff9c08 RCX: 00000000b879ed29
RDX: ffffe97bd00025c0 RSI: ffffe97bd00025c0 RDI: ffff9fa5ccff9c08
RBP: ffffb148c2f3f9f0 R08: 0000000000000004 R09: 0000000000000004
R10: 0000000000000000 R11: 0000000000000200 R12: 0000000000000000
R13: 00007f16a18d5000 R14: ffff9fa5c48db6a8 R15: 0000000000000000
FS: 00007f16a1b54740(0000) GS:ffff9fa73df00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffe97bd00025c8 CR3: 00000001048c6006 CR4: 0000000000172ef0
Call Trace:
<TASK>
? __die_body.cold+0x19/0x1f
? __die+0x2e/0x40
? page_fault_oops+0x157/0x2b0
? search_module_extables+0x53/0x80
? validate_page_before_insert+0x5/0xb0
? kernelmode_fixup_or_oops.isra.0+0x5f/0x70
? __bad_area_nosemaphore+0x16e/0x1b0
? bad_area_nosemaphore+0x16/0x20
? do_kern_addr_fault+0x77/0x90
? exc_page_fault+0x22b/0x230
? asm_exc_page_fault+0x2b/0x30
? validate_page_before_insert+0x5/0xb0
? vm_insert_pages+0x151/0x400
__rb_map_vma+0x21f/0x3f0
ring_buffer_map+0x21b/0x2f0
tracing_buffers_mmap+0x70/0xd0
__mmap_region+0x6f0/0xbd0
mmap_region+0x7f/0x130
do_mmap+0x475/0x610
vm_mmap_pgoff+0xf2/0x1d0
ksys_mmap_pgoff+0x166/0x200
__x64_sys_mmap+0x37/0x50
x64_sys_call+0x1670/0x1d70
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The reason was that the code that maps the ring buffer pages to user space
has:
page = virt_to_page((void *)cpu_buffer->subbuf_ids[s]);
And uses that in:
vm_insert_pages(vma, vma->vm_start, pages, &nr_pages);
But virt_to_page() does not work with vmap()'d memory which is what the
persistent ring buffer has. It is rather trivial to allow this, but for
now just disable mmap() of instances that have their ring buffer from the
reserve_mem option.
If an mmap() is performed on a persistent buffer it will return -ENODEV
just like it would if the .mmap field wasn't defined in the
file_operations structure.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20250214115547.0d7287d3@gandalf.local.home
Fixes: 9b7bdf6f6ece6 ("tracing: Have trace_printk not use binary prints if boot buffer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"MAINTAINERS maintenance.
Changed email, added entry, deleted entry falling back to a generic
one"
* tag 'i2c-for-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Add maintainer for Qualcomm's I2C GENI driver
MAINTAINERS: delete entry for AXXIA I2C
MAINTAINERS: Use my kernel.org address for I2C ACPI work
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix isolated VFs handling by verifying that a VF’s parent PF is
locally owned before registering it in an existing PCI domain
- Disable arch_test_bit() optimization for PROFILE_ALL_BRANCHES to
workaround gcc failure in handling __builtin_constant_p() in this
case
- Fix CHPID "configure" attribute caching in CIO by not updating the
cache when SCLP returns no data, ensuring consistent sysfs output
- Remove CONFIG_LSM from default configs and rely on defaults, which
enables BPF LSM hook
* tag 's390-6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pci: Fix handling of isolated VFs
s390/pci: Pull search for parent PF out of zpci_iov_setup_virtfn()
s390/bitops: Disable arch_test_bit() optimization for PROFILE_ALL_BRANCHES
s390/cio: Fix CHPID "configure" attribute caching
s390/configs: Remove CONFIG_LSM
|
|
Namely: s/becasue/because/ and s/wiht/with/ plus an added article.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
scripts/Makefile.clang was changed in the linked commit to move --target from
KBUILD_CFLAGS to KBUILD_CPPFLAGS, as that generally has a broader scope.
However that variable is not inspected by the userprogs logic,
breaking cross compilation on clang.
Use both variables to detect bitsize and target arguments for userprogs.
Fixes: feb843a469fb ("kbuild: add $(CLANG_FLAGS) to KBUILD_CPPFLAGS")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
- Fix objtool warning due to future Rust 1.85.0 (to be released in a
few days)
- Clean future Rust 1.86.0 (to be released 2025-04-03) Clippy warning
* tag 'rust-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: rbtree: fix overindented list item
objtool/rust: add one more `noreturn` Rust function
|
|
The Tegra210 Audio DMA controller driver did a plain divide:
page_no = (res_page->start - res_base->start) / cdata->ch_base_offset;
which causes problems on 32-bit x86 configurations that have 64-bit
resource sizes:
x86_64-linux-ld: drivers/dma/tegra210-adma.o: in function `tegra_adma_probe':
tegra210-adma.c:(.text+0x1322): undefined reference to `__udivdi3'
because gcc doesn't generate the trivial code for a 64-by-32 divide,
turning it into a function call to do a full 64-by-64 divide. And the
kernel intentionally doesn't provide that helper function, because 99%
of the time all you want is the narrower version.
Of course, tegra210 is a 64-bit architecture and the 32-bit x86 build is
purely for build testing, so this really is just about build coverage
failure.
But build coverage is good.
Side note: div_u64() would be suboptimal if you actually have a 32-bit
resource_t, so our "helper" for divides are admittedly making it harder
than it should be to generate good code for all the possible cases.
At some point, I'll consider 32-bit x86 so entirely legacy that I can't
find it in myself to care any more, and we'll just add the __udivdi3
library function.
But for now, the right thing to do is to use "div_u64()" to show that
you know that you are doing the simpler divide with a 32-bit number.
And the build error enforces that.
While fixing the build issue, also check for division-by-zero, and for
overflow. Which hopefully cannot happen on real production hardware,
but the value of 'ch_base_offset' can definitely be zero in other
places.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix interrupt handling issues in gpio-bcm-kona
- add an ACPI quirk for Acer Nitro ANV14 fixing an issue with spurious
wake up events
- add missing return value checks to gpio-stmpe
- fix a crash in error path in gpiochip_get_ngpios()
* tag 'gpio-fixes-for-v6.14-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: Fix crash on error in gpiochip_get_ngpios()
gpio: stmpe: Check return value of stmpe_reg_read in stmpe_gpio_irq_sync_unlock
gpiolib: acpi: Add a quirk for Acer Nitro ANV14
gpio: bcm-kona: Add missing newline to dev_err format string
gpio: bcm-kona: Make sure GPIO bits are unlocked when requesting IRQ
gpio: bcm-kona: Fix GPIO lock/unlock for banks above bank 0
|
|
Since commit 5f73e7d0386d ("kbuild: refactor cross-compiling
linux-headers package"), the linux-headers Debian package fails to
build when $(CC) cannot build userspace applications, for example,
when using toolchains installed by the 0day bot.
The host programs in the linux-headers package should be rebuilt using
the disto's cross-compiler, ${DEB_HOST_GNU_TYPE}-gcc instead of $(CC).
Hence, the variable 'CC' must be expanded in this shell script instead
of in the top-level Makefile.
Commit f354fc88a72a ("kbuild: install-extmod-build: add missing
quotation marks for CC variable") was not a correct fix because
CC="ccache gcc" should be unrelated when rebuilding userspace tools.
Fixes: 5f73e7d0386d ("kbuild: refactor cross-compiling linux-headers package")
Reported-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Closes: https://lore.kernel.org/linux-kbuild/CAK7LNARb3xO3ptBWOMpwKcyf3=zkfhMey5H2KnB1dOmUwM79dA@mail.gmail.com/T/#t
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
When CONFIG_OBJTOOL=y or CONFIG_DEBUG_INFO_BTF=y, parallel builds
show awkward "mkdir -p ..." logs.
$ make -j16
[ snip ]
mkdir -p /home/masahiro/ref/linux/tools/objtool && make O=/home/masahiro/ref/linux subdir=tools/objtool --no-print-directory -C objtool
mkdir -p /home/masahiro/ref/linux/tools/bpf/resolve_btfids && make O=/home/masahiro/ref/linux subdir=tools/bpf/resolve_btfids --no-print-directory -C bpf/resolve_btfids
Defining MAKEFLAGS=<value> on the command line wipes out command line
switches from the resultant MAKEFLAGS definition, even though the command
line switches are active. [1]
MAKEFLAGS puts all single-letter options into the first word, and that
word will be empty if no single-letter options were given. [2]
However, this breaks if MAKEFLAGS=<value> is given on the command line.
The tools/ and tools/% targets set MAKEFLAGS=<value> on the command
line, which breaks the following code in tools/scripts/Makefile.include:
short-opts := $(firstword -$(MAKEFLAGS))
If MAKEFLAGS really needs modification, it should be done through the
environment variable, as follows:
MAKEFLAGS=<value> $(MAKE) ...
That said, I question whether modifying MAKEFLAGS is necessary here.
The only flag we might want to exclude is --no-print-directory, as the
tools build system changes the working directory. However, people might
find the "Entering/Leaving directory" logs annoying.
I simply removed the offending MAKEFLAGS=<value>.
[1]: https://savannah.gnu.org/bugs/?62469
[2]: https://www.gnu.org/software/make/manual/make.html#Testing-Flags
Fixes: ea01fa9f63ae ("tools: Connect to the kernel build system")
Fixes: a50e43332756 ("perf tools: Honor parallel jobs")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha
Pull alpha fixes from Matt Turner:
"A few changes for alpha, including some important fixes for kernel
stack alignment"
* tag 'alpha-fixes-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
alpha: Use str_yes_no() helper in pci_dac_dma_supported()
alpha: Replace one-element array with flexible array member
alpha: align stack for page fault and user unaligned trap handlers
alpha: make stack 16-byte aligned (most cases)
alpha: replace hardcoded stack offsets with autogenerated ones
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Update a BUILD_BUG_ON() usage that works on current compilers, but
breaks compilation on gcc 5.3.1 (Alex Williamson)
- Avoid use of FLR for Mediatek MT7922 WiFi; the device previously
worked after a long timeout and fallback to SBR, but after a recent
RRS change it doesn't work at all after FLR (Bjorn Helgaas)
* tag 'pci-v6.14-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Avoid FLR for Mediatek MT7922 WiFi
PCI: Fix BUILD_BUG_ON usage for old gcc
|
|
KVM fixes for 6.14 part 1
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being emulated
by KVM to fix a NULL pointer dereference.
- Enter guest mode (L2) from KVM's perspective before initializing the vCPU's
nested NPT MMU so that the MMU is properly tagged for L2, not L1.
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as the
guest's value may be stale if a VM-Exit is handled in the fastpath.
|
|
Fix issues with enabling SNP host support and effectively SNP support
which is broken with respect to the KVM module being built-in.
SNP host support is enabled in snp_rmptable_init() which is invoked as
device_initcall(). SNP check on IOMMU is done during IOMMU PCI init
(IOMMU_PCI_INIT stage). And for that reason snp_rmptable_init() is
currently invoked via device_initcall() and cannot be invoked via
subsys_initcall() as core IOMMU subsystem gets initialized via
subsys_initcall().
Now, if kvm_amd module is built-in, it gets initialized before SNP host
support is enabled in snp_rmptable_init() :
[ 10.131811] kvm_amd: TSC scaling supported
[ 10.136384] kvm_amd: Nested Virtualization enabled
[ 10.141734] kvm_amd: Nested Paging enabled
[ 10.146304] kvm_amd: LBR virtualization supported
[ 10.151557] kvm_amd: SEV enabled (ASIDs 100 - 509)
[ 10.156905] kvm_amd: SEV-ES enabled (ASIDs 1 - 99)
[ 10.162256] kvm_amd: SEV-SNP enabled (ASIDs 1 - 99)
[ 10.171508] kvm_amd: Virtual VMLOAD VMSAVE supported
[ 10.177052] kvm_amd: Virtual GIF supported
...
...
[ 10.201648] kvm_amd: in svm_enable_virtualization_cpu
And then svm_x86_ops->enable_virtualization_cpu()
(svm_enable_virtualization_cpu) programs MSR_VM_HSAVE_PA as following:
wrmsrl(MSR_VM_HSAVE_PA, sd->save_area_pa);
So VM_HSAVE_PA is non-zero before SNP support is enabled on all CPUs.
snp_rmptable_init() gets invoked after svm_enable_virtualization_cpu()
as following :
...
[ 11.256138] kvm_amd: in svm_enable_virtualization_cpu
...
[ 11.264918] SEV-SNP: in snp_rmptable_init
This triggers a #GP exception in snp_rmptable_init() when snp_enable()
is invoked to set SNP_EN in SYSCFG MSR:
[ 11.294289] unchecked MSR access error: WRMSR to 0xc0010010 (tried to write 0x0000000003fc0000) at rIP: 0xffffffffaf5d5c28 (native_write_msr+0x8/0x30)
...
[ 11.294404] Call Trace:
[ 11.294482] <IRQ>
[ 11.294513] ? show_stack_regs+0x26/0x30
[ 11.294522] ? ex_handler_msr+0x10f/0x180
[ 11.294529] ? search_extable+0x2b/0x40
[ 11.294538] ? fixup_exception+0x2dd/0x340
[ 11.294542] ? exc_general_protection+0x14f/0x440
[ 11.294550] ? asm_exc_general_protection+0x2b/0x30
[ 11.294557] ? __pfx_snp_enable+0x10/0x10
[ 11.294567] ? native_write_msr+0x8/0x30
[ 11.294570] ? __snp_enable+0x5d/0x70
[ 11.294575] snp_enable+0x19/0x20
[ 11.294578] __flush_smp_call_function_queue+0x9c/0x3a0
[ 11.294586] generic_smp_call_function_single_interrupt+0x17/0x20
[ 11.294589] __sysvec_call_function+0x20/0x90
[ 11.294596] sysvec_call_function+0x80/0xb0
[ 11.294601] </IRQ>
[ 11.294603] <TASK>
[ 11.294605] asm_sysvec_call_function+0x1f/0x30
...
[ 11.294631] arch_cpu_idle+0xd/0x20
[ 11.294633] default_idle_call+0x34/0xd0
[ 11.294636] do_idle+0x1f1/0x230
[ 11.294643] ? complete+0x71/0x80
[ 11.294649] cpu_startup_entry+0x30/0x40
[ 11.294652] start_secondary+0x12d/0x160
[ 11.294655] common_startup_64+0x13e/0x141
[ 11.294662] </TASK>
This #GP exception is getting triggered due to the following errata for
AMD family 19h Models 10h-1Fh Processors:
Processor may generate spurious #GP(0) Exception on WRMSR instruction:
Description:
The Processor will generate a spurious #GP(0) Exception on a WRMSR
instruction if the following conditions are all met:
- the target of the WRMSR is a SYSCFG register.
- the write changes the value of SYSCFG.SNPEn from 0 to 1.
- One of the threads that share the physical core has a non-zero
value in the VM_HSAVE_PA MSR.
The document being referred to above:
https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/revision-guides/57095-PUB_1_01.pdf
To summarize, with kvm_amd module being built-in, KVM/SVM initialization
happens before host SNP is enabled and this SVM initialization
sets VM_HSAVE_PA to non-zero, which then triggers a #GP when
SYSCFG.SNPEn is being set and this will subsequently cause
SNP_INIT(_EX) to fail with INVALID_CONFIG error as SYSCFG[SnpEn] is not
set on all CPUs.
Essentially SNP host enabling code should be invoked before KVM
initialization, which is currently not the case when KVM is built-in.
Add fix to call snp_rmptable_init() early from iommu_snp_enable()
directly and not invoked via device_initcall() which enables SNP host
support before KVM initialization with kvm_amd module built-in.
Add additional handling for `iommu=off` or `amd_iommu=off` options.
Note that IOMMUs need to be enabled for SNP initialization, therefore,
if host SNP support is enabled but late IOMMU initialization fails
then that will cause PSP driver's SNP_INIT to fail as IOMMU SNP sanity
checks in SNP firmware will fail with invalid configuration error as
below:
[ 9.723114] ccp 0000:23:00.1: sev enabled
[ 9.727602] ccp 0000:23:00.1: psp enabled
[ 9.732527] ccp 0000:a2:00.1: enabling device (0000 -> 0002)
[ 9.739098] ccp 0000:a2:00.1: no command queues available
[ 9.745167] ccp 0000:a2:00.1: psp enabled
[ 9.805337] ccp 0000:23:00.1: SEV-SNP: failed to INIT rc -5, error 0x3
[ 9.866426] ccp 0000:23:00.1: SEV API:1.53 build:5
Fixes: c3b86e61b756 ("x86/cpufeatures: Enable/unmask SEV-SNP CPU feature")
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Message-ID: <138b520fb83964782303b43ade4369cd181fdd9c.1739226950.git.ashish.kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The kernel's initcall infrastructure lacks the ability to express
dependencies between initcalls, whereas the modules infrastructure
automatically handles dependencies via symbol loading. Ensure the
PSP SEV driver is initialized before proceeding in sev_hardware_setup()
if KVM is built-in as the dependency isn't handled by the initcall
infrastructure.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-ID: <f78ddb64087df27e7bcb1ae0ab53f55aa0804fab.1739226950.git.ashish.kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM is dependent on the PSP SEV driver and PSP SEV driver needs to be
loaded before KVM module. In case of module loading any dependent
modules are automatically loaded but in case of built-in modules there
is no inherent mechanism available to specify dependencies between
modules and ensure that any dependent modules are loaded implicitly.
Add a new external API interface for PSP module initialization which
allows PSP SEV driver to be loaded explicitly if KVM is built-in.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-ID: <15279ca0cad56a07cf12834ec544310f85ff5edc.1739226950.git.ashish.kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
