summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-07-24can: mcp251x: add error check when wq alloc failedWeitao Hou1-27/+22
add error check when workqueue alloc failed, and remove redundant code to make it clear. Fixes: e0000163e30e ("can: Driver for the Microchip MCP251x SPI CAN controllers") Signed-off-by: Weitao Hou <houweitaoo@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Tested-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-07-24can: rcar_canfd: fix possible IRQ storm on high loadNikita Yushchenko1-4/+5
We have observed rcar_canfd driver entering IRQ storm under high load, with following scenario: - rcar_canfd_global_interrupt() in entered due to Rx available, - napi_schedule_prep() is called, and sets NAPIF_STATE_SCHED in state - Rx fifo interrupts are masked, - rcar_canfd_global_interrupt() is entered again, this time due to error interrupt (e.g. due to overflow), - since scheduled napi poller has not yet executed, condition for calling napi_schedule_prep() from rcar_canfd_global_interrupt() remains true, thus napi_schedule_prep() gets called and sets NAPIF_STATE_MISSED flag in state, - later, napi poller function rcar_canfd_rx_poll() gets executed, and calls napi_complete_done(), - due to NAPIF_STATE_MISSED flag in state, this call does not clear NAPIF_STATE_SCHED flag from state, - on return from napi_complete_done(), rcar_canfd_rx_poll() unmasks Rx interrutps, - Rx interrupt happens, rcar_canfd_global_interrupt() gets called and calls napi_schedule_prep(), - since NAPIF_STATE_SCHED is set in state at this time, this call returns false, - due to that false return, rcar_canfd_global_interrupt() returns without masking Rx interrupt - and this results into IRQ storm: unmasked Rx interrupt happens again and again is misprocessed in the same way. This patch fixes that scenario by unmasking Rx interrupts only when napi_complete_done() returns true, which means it has cleared NAPIF_STATE_SCHED in state. Fixes: dd3bd23eb438 ("can: rcar_canfd: Add Renesas R-Car CAN FD driver") Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-07-24can: dev: call netif_carrier_off() in register_candev()Rasmus Villemoes1-0/+2
CONFIG_CAN_LEDS is deprecated. When trying to use the generic netdev trigger as suggested, there's a small inconsistency with the link property: The LED is on initially, stays on when the device is brought up, and then turns off (as expected) when the device is brought down. Make sure the LED always reflects the state of the CAN device. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-07-24net: thunderx: Use fwnode_get_mac_address()Andy Shevchenko1-12/+6
Replace the custom implementation with fwnode_get_mac_address, which works on both DT and ACPI platforms. While here, replace memcpy() by ether_addr_copy(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23sky2: Disable MSI on ASUS P6TTakashi Iwai1-0/+7
The onboard sky2 NIC on ASUS P6T WS PRO doesn't work after PM resume due to the infamous IRQ problem. Disabling MSI works around it, so let's add it to the blacklist. Unfortunately the BIOS on the machine doesn't fill the standard DMI_SYS_* entry, so we pick up DMI_BOARD_* entries instead. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1142496 Reported-and-tested-by: Marcus Seyfarth <m.seyfarth@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23net: dsa: sja1105: sja1105_main: Add of_node_put()Nishka Dasgupta1-0/+3
Each iteration of for_each_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23net: dsa: mv88e6xxx: chip: Add of_node_put() before returnNishka Dasgupta1-0/+1
Each iteration of for_each_available_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23Merge branch 'selftests-forwarding-GRE-multipath-fixes'David S. Miller1-12/+16
Ido Schimmel says: ==================== selftests: forwarding: GRE multipath fixes Patch #1 ensures IPv4 forwarding is enabled during the test. Patch #2 fixes the flower filters used to measure the distribution of the traffic between the two nexthops, so that the test will pass regardless if traffic is offloaded or not. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23selftests: forwarding: gre_multipath: Fix flower filtersIdo Schimmel1-12/+12
The TC filters used in the test do not work with veth devices because the outer Ethertype is 802.1Q and not IPv4. The test passes with mlxsw netdevs since the hardware always looks at "The first Ethertype that does not point to either: VLAN, CNTAG or configurable Ethertype". Fix this by matching on the VLAN ID instead, but on the ingress side. The reason why this is not performed at egress is explained in the commit cited below. Fixes: 541ad323db3a ("selftests: forwarding: gre_multipath: Update next-hop statistics match criteria") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Stephen Suryaputra <ssuryaextr@gmail.com> Tested-by: Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23selftests: forwarding: gre_multipath: Enable IPv4 forwardingIdo Schimmel1-0/+4
The test did not enable IPv4 forwarding during its setup phase, which causes the test to fail on machines where IPv4 forwarding is disabled. Fixes: 54818c4c4b93 ("selftests: forwarding: Test multipath tunneling") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Stephen Suryaputra <ssuryaextr@gmail.com> Tested-by: Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23Revert "net: hns: fix LED configuration for marvell phy"David S. Miller1-22/+1
This reverts commit f4e5f775db5a4631300dccd0de5eafb50a77c131. Andrew Lunn says this should be handled another way. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23net: stmmac: Do not cut down 1G modesJose Abreu1-8/+3
Some glue logic drivers support 1G without having GMAC/GMAC4/XGMAC. Let's allow this speed by default. Reported-by: Ondrej Jirman <megi@xff.cz> Tested-by: Ondrej Jirman <megi@xff.cz> Fixes: 5b0d7d7da64b ("net: stmmac: Add the missing speeds that XGMAC supports") Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23Merge branch 'stmmac-fixes'David S. Miller1-11/+10
Jose Abreu says: ==================== net: stmmac: Two fixes Two fixes targeting -net. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23net: stmmac: Use kcalloc() instead of kmalloc_array()Jose Abreu1-9/+8
We need the memory to be zeroed upon allocation so use kcalloc() instead. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23net: stmmac: RX Descriptors need to be clean before setting buffersJose Abreu1-2/+2
RX Descriptors are being cleaned after setting the buffers which may lead to buffer addresses being wiped out. Fix this by clearing earlier the RX Descriptors. Fixes: 2af6106ae949 ("net: stmmac: Introducing support for Page Pool") Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23net: hns: fix LED configuration for marvell phyYonglong Liu1-1/+22
Since commit(net: phy: marvell: change default m88e1510 LED configuration), the active LED of Hip07 devices is always off, because Hip07 just use 2 LEDs. This patch adds a phy_register_fixup_for_uid() for m88e1510 to correct the LED configuration. Fixes: 077772468ec1 ("net: phy: marvell: change default m88e1510 LED configuration") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Reviewed-by: linyunsheng <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23net: mvpp2: Don't check for 3 consecutive Idle frames for 10G linksMaxime Chevallier1-3/+3
PPv2's XLGMAC can wait for 3 idle frames before triggering a link up event. This can cause the link to be stuck low when there's traffic on the interface, so disable this feature. Fixes: 4bb043262878 ("net: mvpp2: phylink support") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22bonding: Force slave speed check after link state recovery for 802.3adThomas Falcon1-0/+9
The following scenario was encountered during testing of logical partition mobility on pseries partitions with bonded ibmvnic adapters in LACP mode. 1. Driver receives a signal that the device has been swapped, and it needs to reset to initialize the new device. 2. Driver reports loss of carrier and begins initialization. 3. Bonding driver receives NETDEV_CHANGE notifier and checks the slave's current speed and duplex settings. Because these are unknown at the time, the bond sets its link state to BOND_LINK_FAIL and handles the speed update, clearing AD_PORT_LACP_ENABLE. 4. Driver finishes recovery and reports that the carrier is on. 5. Bond receives a new notification and checks the speed again. The speeds are valid but miimon has not altered the link state yet. AD_PORT_LACP_ENABLE remains off. Because the slave's link state is still BOND_LINK_FAIL, no further port checks are made when it recovers. Though the slave devices are operational and have valid speed and duplex settings, the bond will not send LACPDU's. The simplest fix I can see is to force another speed check in bond_miimon_commit. This way the bond will update AD_PORT_LACP_ENABLE if needed when transitioning from BOND_LINK_FAIL to BOND_LINK_UP. CC: Jarod Wilson <jarod@redhat.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull preemption Kconfig fix from Thomas Gleixner: "The PREEMPT_RT stub config renamed PREEMPT to PREEMPT_LL and defined PREEMPT outside of the menu and made it selectable by both PREEMPT_LL and PREEMPT_RT. Stupid me missed that 114 defconfigs select CONFIG_PREEMPT which obviously can't work anymore. oldconfig builds are affected as well, but it's more obvious as the user gets asked. [old]defconfig silently fixes it up and selects PREEMPT_NONE. Unbreak it by undoing the rename and adding a intermediate config symbol which is selected by both PREEMPT and PREEMPT_RT. That requires to chase down a few #ifdefs, but it's better than tweaking 114 defconfigs and annoying users" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt, Kconfig: Unbreak def/oldconfig with CONFIG_PREEMPT=y
2019-07-22Merge tag 'for-linus-20190722' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull pidfd polling fix from Christian Brauner: "A fix for pidfd polling. It ensures that the task's exit state is visible to all waiters" * tag 'for-linus-20190722' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: pidfd: fix a poll race when setting exit_state
2019-07-22Merge tag 'for-5.3-rc1-tag' of ↵Linus Torvalds4-4/+32
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - fixes for leaks caused by recently merged patches - one build fix - a fix to prevent mixing of incompatible features * tag 'for-5.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: don't leak extent_map in btrfs_get_io_geometry() btrfs: free checksum hash on in close_ctree btrfs: Fix build error while LIBCRC32C is module btrfs: inode: Don't compress if NODATASUM or NODATACOW set
2019-07-22sched/rt, Kconfig: Unbreak def/oldconfig with CONFIG_PREEMPT=yThomas Gleixner1-4/+4
The merge of the CONFIG_PREEMPT_RT stub renamed CONFIG_PREEMPT to CONFIG_PREEMPT_LL which causes all defconfigs which have CONFIG_PREEMPT=y set to fall back to CONFIG_PREEMPT_NONE because CONFIG_PREEMPT depends on the preemption mode choice wich defaults to NONE. This also affects oldconfig builds. So rather than changing 114 defconfig files and being an annoyance to users, revert the rename and select a new config symbol PREEMPTION. That keeps everything working smoothly and the revelant ifdef's are going to be fixed up step by step. Reported-by: Mark Rutland <mark.rutland@arm.com> Fixes: a50a3f4b6a31 ("sched/rt, Kconfig: Introduce CONFIG_PREEMPT_RT") Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2019-07-22Merge tag 'media/v5.3-2' of ↵Linus Torvalds2-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "For two regressions in media core: - v4l2-subdev: fix regression in check_pad() - videodev2.h: change V4L2_PIX_FMT_BGRA444 define: fourcc was already in use" * tag 'media/v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: videodev2.h: change V4L2_PIX_FMT_BGRA444 define: fourcc was already in use media: v4l2-subdev: fix regression in check_pad()
2019-07-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds91-236/+322
Pull networking fixes from David Miller: 1) Several netfilter fixes including a nfnetlink deadlock fix from Florian Westphal and fix for dropping VRF packets from Miaohe Lin. 2) Flow offload fixes from Pablo Neira Ayuso including a fix to restore proper block sharing. 3) Fix r8169 PHY init from Thomas Voegtle. 4) Fix memory leak in mac80211, from Lorenzo Bianconi. 5) Missing NULL check on object allocation in cxgb4, from Navid Emamdoost. 6) Fix scaling of RX power in sfp phy driver, from Andrew Lunn. 7) Check that there is actually an ip header to access in skb->data in VRF, from Peter Kosyh. 8) Remove spurious rcu unlock in hv_netvsc, from Haiyang Zhang. 9) One more tweak the the TCP fragmentation memory limit changes, to be less harmful to applications setting small SO_SNDBUF values. From Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits) tcp: be more careful in tcp_fragment() hv_netvsc: Fix extra rcu_read_unlock in netvsc_recv_callback() vrf: make sure skb->data contains ip header to make routing connector: remove redundant input callback from cn_dev qed: Prefer pcie_capability_read_word() igc: Prefer pcie_capability_read_word() cxgb4: Prefer pcie_capability_read_word() be2net: Synchronize be_update_queues with dev_watchdog bnx2x: Prevent load reordering in tx completion processing net: phy: sfp: hwmon: Fix scaling of RX power net: sched: verify that q!=NULL before setting q->flags chelsio: Fix a typo in a function name allocate_flower_entry: should check for null deref net: hns3: typo in the name of a constant kbuild: add net/netfilter/nf_tables_offload.h to header-test blacklist. tipc: Fix a typo mac80211: don't warn about CW params when not using them mac80211: fix possible memory leak in ieee80211_assign_beacon nl80211: fix NL80211_HE_MAX_CAPABILITY_LEN nl80211: fix VENDOR_CMD_RAW_DATA ...
2019-07-22pidfd: fix a poll race when setting exit_stateSuren Baghdasaryan1-0/+1
There is a race between reading task->exit_state in pidfd_poll and writing it after do_notify_parent calls do_notify_pidfd. Expected sequence of events is: CPU 0 CPU 1 ------------------------------------------------ exit_notify do_notify_parent do_notify_pidfd tsk->exit_state = EXIT_DEAD pidfd_poll if (tsk->exit_state) However nothing prevents the following sequence: CPU 0 CPU 1 ------------------------------------------------ exit_notify do_notify_parent do_notify_pidfd pidfd_poll if (tsk->exit_state) tsk->exit_state = EXIT_DEAD This causes a polling task to wait forever, since poll blocks because exit_state is 0 and the waiting task is not notified again. A stress test continuously doing pidfd poll and process exits uncovered this bug. To fix it, we make sure that the task's exit_state is always set before calling do_notify_pidfd. Fixes: b53b0b9d9a6 ("pidfd: add polling support") Cc: kernel-team@android.com Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Link: https://lore.kernel.org/r/20190717172100.261204-1-joel@joelfernandes.org [christian@brauner.io: adapt commit message and drop unneeded changes from wait_task_zombie] Signed-off-by: Christian Brauner <christian@brauner.io>
2019-07-22tcp: be more careful in tcp_fragment()Eric Dumazet2-2/+16
Some applications set tiny SO_SNDBUF values and expect TCP to just work. Recent patches to address CVE-2019-11478 broke them in case of losses, since retransmits might be prevented. We should allow these flows to make progress. This patch allows the first and last skb in retransmit queue to be split even if memory limits are hit. It also adds the some room due to the fact that tcp_sendmsg() and tcp_sendpage() might overshoot sk_wmem_queued by about one full TSO skb (64KB size). Note this allowance was already present in stable backports for kernels < 4.15 Note for < 4.15 backports : tcp_rtx_queue_tail() will probably look like : static inline struct sk_buff *tcp_rtx_queue_tail(const struct sock *sk) { struct sk_buff *skb = tcp_send_head(sk); return skb ? tcp_write_queue_prev(sk, skb) : tcp_write_queue_tail(sk); } Fixes: f070ef2ac667 ("tcp: tcp_fragment() should apply sane memory limits") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrew Prout <aprout@ll.mit.edu> Tested-by: Andrew Prout <aprout@ll.mit.edu> Tested-by: Jonathan Lemon <jonathan.lemon@gmail.com> Tested-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Christoph Paasch <cpaasch@apple.com> Cc: Jonathan Looney <jtl@netflix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22hv_netvsc: Fix extra rcu_read_unlock in netvsc_recv_callback()Haiyang Zhang1-1/+0
There is an extra rcu_read_unlock left in netvsc_recv_callback(), after a previous patch that removes RCU from this function. This patch removes the extra RCU unlock. Fixes: 345ac08990b8 ("hv_netvsc: pass netvsc_device to receive callback") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22Linus 5.3-rc1v5.3-rc1Linus Torvalds1-2/+2
2019-07-21vrf: make sure skb->data contains ip header to make routingPeter Kosyh1-23/+35
vrf_process_v4_outbound() and vrf_process_v6_outbound() do routing using ip/ipv6 addresses, but don't make sure the header is available in skb->data[] (skb_headlen() is less then header size). Case: 1) igb driver from intel. 2) Packet size is greater then 255. 3) MPLS forwards to VRF device. So, patch adds pskb_may_pull() calls in vrf_process_v4/v6_outbound() functions. Signed-off-by: Peter Kosyh <p.kosyh@gmail.com> Reviewed-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21connector: remove redundant input callback from cn_devVasily Averin2-6/+1
A small cleanup: this callback is never used. Originally fixed by Stanislav Kinsburskiy <skinsbursky@virtuozzo.com> for OpenVZ7 bug OVZ-6877 cc: stanislav.kinsburskiy@gmail.com Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21qed: Prefer pcie_capability_read_word()Frederick Lawler1-3/+2
Commit 8c0d3a02c130 ("PCI: Add accessors for PCI Express Capability") added accessors for the PCI Express Capability so that drivers didn't need to be aware of differences between v1 and v2 of the PCI Express Capability. Replace pci_read_config_word() and pci_write_config_word() calls with pcie_capability_read_word() and pcie_capability_write_word(). Signed-off-by: Frederick Lawler <fred@fredlawl.com> Acked-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21igc: Prefer pcie_capability_read_word()Frederick Lawler1-8/+4
Commit 8c0d3a02c130 ("PCI: Add accessors for PCI Express Capability") added accessors for the PCI Express Capability so that drivers didn't need to be aware of differences between v1 and v2 of the PCI Express Capability. Replace pci_read_config_word() and pci_write_config_word() calls with pcie_capability_read_word() and pcie_capability_write_word(). Signed-off-by: Frederick Lawler <fred@fredlawl.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21cxgb4: Prefer pcie_capability_read_word()Frederick Lawler2-10/+5
Commit 8c0d3a02c130 ("PCI: Add accessors for PCI Express Capability") added accessors for the PCI Express Capability so that drivers didn't need to be aware of differences between v1 and v2 of the PCI Express Capability. Replace pci_read_config_word() and pci_write_config_word() calls with pcie_capability_read_word() and pcie_capability_write_word(). Signed-off-by: Frederick Lawler <fred@fredlawl.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21be2net: Synchronize be_update_queues with dev_watchdogBenjamin Poirier1-0/+5
As pointed out by Firo Yang, a netdev tx timeout may trigger just before an ethtool set_channels operation is started. be_tx_timeout(), which dumps some queue structures, is not written to run concurrently with be_update_queues(), which frees/allocates those queues structures. Add some synchronization between the two. Message-id: <CH2PR18MB31898E033896F9760D36BFF288C90@CH2PR18MB3189.namprd18.prod.outlook.com> Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21bnx2x: Prevent load reordering in tx completion processingBrian King1-0/+3
This patch fixes an issue seen on Power systems with bnx2x which results in the skb is NULL WARN_ON in bnx2x_free_tx_pkt firing due to the skb pointer getting loaded in bnx2x_free_tx_pkt prior to the hw_cons load in bnx2x_tx_int. Adding a read memory barrier resolves the issue. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21net: phy: sfp: hwmon: Fix scaling of RX powerAndrew Lunn1-1/+1
The RX power read from the SFP uses units of 0.1uW. This must be scaled to units of uW for HWMON. This requires a divide by 10, not the current 100. With this change in place, sensors(1) and ethtool -m agree: sff2-isa-0000 Adapter: ISA adapter in0: +3.23 V temp1: +33.1 C power1: 270.00 uW power2: 200.00 uW curr1: +0.01 A Laser output power : 0.2743 mW / -5.62 dBm Receiver signal average optical power : 0.2014 mW / -6.96 dBm Reported-by: chris.healy@zii.aero Signed-off-by: Andrew Lunn <andrew@lunn.ch> Fixes: 1323061a018a ("net: phy: sfp: Add HWMON support for module sensors") Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21net: sched: verify that q!=NULL before setting q->flagsVlad Buslov1-1/+3
In function int tc_new_tfilter() q pointer can be NULL when adding filter on a shared block. With recent change that resets TCQ_F_CAN_BYPASS after filter creation, following NULL pointer dereference happens in case parent block is shared: [ 212.925060] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 212.925445] #PF: supervisor write access in kernel mode [ 212.925709] #PF: error_code(0x0002) - not-present page [ 212.925965] PGD 8000000827923067 P4D 8000000827923067 PUD 827924067 PMD 0 [ 212.926302] Oops: 0002 [#1] SMP KASAN PTI [ 212.926539] CPU: 18 PID: 2617 Comm: tc Tainted: G B 5.2.0+ #512 [ 212.926938] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 212.927364] RIP: 0010:tc_new_tfilter+0x698/0xd40 [ 212.927633] Code: 74 0d 48 85 c0 74 08 48 89 ef e8 03 aa 62 00 48 8b 84 24 a0 00 00 00 48 8d 78 10 48 89 44 24 18 e8 4d 0c 6b ff 48 8b 44 24 18 <83> 60 10 f b 48 85 ed 0f 85 3d fe ff ff e9 4f fe ff ff e8 81 26 f8 [ 212.928607] RSP: 0018:ffff88884fd5f5d8 EFLAGS: 00010296 [ 212.928905] RAX: 0000000000000000 RBX: 0000000000000000 RCX: dffffc0000000000 [ 212.929201] RDX: 0000000000000007 RSI: 0000000000000004 RDI: 0000000000000297 [ 212.929402] RBP: ffff88886bedd600 R08: ffffffffb91d4b51 R09: fffffbfff7616e4d [ 212.929609] R10: fffffbfff7616e4c R11: ffffffffbb0b7263 R12: ffff88886bc61040 [ 212.929803] R13: ffff88884fd5f950 R14: ffffc900039c5000 R15: ffff88835e927680 [ 212.929999] FS: 00007fe7c50b6480(0000) GS:ffff88886f980000(0000) knlGS:0000000000000000 [ 212.930235] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 212.930394] CR2: 0000000000000010 CR3: 000000085bd04002 CR4: 00000000001606e0 [ 212.930588] Call Trace: [ 212.930682] ? tc_del_tfilter+0xa40/0xa40 [ 212.930811] ? __lock_acquire+0x5b5/0x2460 [ 212.930948] ? find_held_lock+0x85/0xa0 [ 212.931081] ? tc_del_tfilter+0xa40/0xa40 [ 212.931201] rtnetlink_rcv_msg+0x4ab/0x5f0 [ 212.931332] ? rtnl_dellink+0x490/0x490 [ 212.931454] ? lockdep_hardirqs_on+0x260/0x260 [ 212.931589] ? netlink_deliver_tap+0xab/0x5a0 [ 212.931717] ? match_held_lock+0x1b/0x240 [ 212.931844] netlink_rcv_skb+0xd0/0x200 [ 212.931958] ? rtnl_dellink+0x490/0x490 [ 212.932079] ? netlink_ack+0x440/0x440 [ 212.932205] ? netlink_deliver_tap+0x161/0x5a0 [ 212.932335] ? lock_downgrade+0x360/0x360 [ 212.932457] ? lock_acquire+0xe5/0x210 [ 212.932579] netlink_unicast+0x296/0x350 [ 212.932705] ? netlink_attachskb+0x390/0x390 [ 212.932834] ? _copy_from_iter_full+0xe0/0x3a0 [ 212.932976] netlink_sendmsg+0x394/0x600 [ 212.937998] ? netlink_unicast+0x350/0x350 [ 212.943033] ? move_addr_to_kernel.part.0+0x90/0x90 [ 212.948115] ? netlink_unicast+0x350/0x350 [ 212.953185] sock_sendmsg+0x96/0xa0 [ 212.958099] ___sys_sendmsg+0x482/0x520 [ 212.962881] ? match_held_lock+0x1b/0x240 [ 212.967618] ? copy_msghdr_from_user+0x250/0x250 [ 212.972337] ? lock_downgrade+0x360/0x360 [ 212.976973] ? rwlock_bug.part.0+0x60/0x60 [ 212.981548] ? __mod_node_page_state+0x1f/0xa0 [ 212.986060] ? match_held_lock+0x1b/0x240 [ 212.990567] ? find_held_lock+0x85/0xa0 [ 212.994989] ? do_user_addr_fault+0x349/0x5b0 [ 212.999387] ? lock_downgrade+0x360/0x360 [ 213.003713] ? find_held_lock+0x85/0xa0 [ 213.007972] ? __fget_light+0xa1/0xf0 [ 213.012143] ? sockfd_lookup_light+0x91/0xb0 [ 213.016165] __sys_sendmsg+0xba/0x130 [ 213.020040] ? __sys_sendmsg_sock+0xb0/0xb0 [ 213.023870] ? handle_mm_fault+0x337/0x470 [ 213.027592] ? page_fault+0x8/0x30 [ 213.031316] ? lockdep_hardirqs_off+0xbe/0x100 [ 213.034999] ? mark_held_locks+0x24/0x90 [ 213.038671] ? do_syscall_64+0x1e/0xe0 [ 213.042297] do_syscall_64+0x74/0xe0 [ 213.045828] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 213.049354] RIP: 0033:0x7fe7c527c7b8 [ 213.052792] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f 0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 54 [ 213.060269] RSP: 002b:00007ffc3f7908a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 213.064144] RAX: ffffffffffffffda RBX: 000000005d34716f RCX: 00007fe7c527c7b8 [ 213.068094] RDX: 0000000000000000 RSI: 00007ffc3f790910 RDI: 0000000000000003 [ 213.072109] RBP: 0000000000000000 R08: 0000000000000001 R09: 00007fe7c5340cc0 [ 213.076113] R10: 0000000000404ec2 R11: 0000000000000246 R12: 0000000000000080 [ 213.080146] R13: 0000000000480640 R14: 0000000000000080 R15: 0000000000000000 [ 213.084147] Modules linked in: act_gact cls_flower sch_ingress nfsv3 nfs_acl nfs lockd grace fscache bridge stp llc sunrpc intel_rapl_msr intel_rapl_common [<1;69;32Msb_edac rdma_ucm rdma_cm x86_pkg_temp_thermal iw_cm intel_powerclamp ib_cm coretemp kvm_intel kvm irqbypass mlx5_ib ib_uverbs ib_core crct10dif_pclmul crc32_pc lmul crc32c_intel ghash_clmulni_intel mlx5_core intel_cstate intel_uncore iTCO_wdt igb iTCO_vendor_support mlxfw mei_me ptp ses intel_rapl_perf mei pcspkr ipmi _ssif i2c_i801 joydev enclosure pps_core lpc_ich ioatdma wmi dca ipmi_si ipmi_devintf ipmi_msghandler acpi_power_meter acpi_pad ast i2c_algo_bit drm_vram_helpe r ttm drm_kms_helper drm mpt3sas raid_class scsi_transport_sas [ 213.112326] CR2: 0000000000000010 [ 213.117429] ---[ end trace adb58eb0a4ee6283 ]--- Verify that q pointer is not NULL before setting the 'flags' field. Fixes: 3f05e6886a59 ("net_sched: unset TCQ_F_CAN_BYPASS when adding filters") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21chelsio: Fix a typo in a function nameChristophe JAILLET1-2/+2
It is likely that 'my3216_poll()' should be 'my3126_poll()'. (1 and 2 switched in 3126. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21allocate_flower_entry: should check for null derefNavid Emamdoost1-1/+2
allocate_flower_entry does not check for allocation success, but tries to deref the result. I only moved the spin_lock under null check, because the caller is checking allocation's status at line 652. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21net: hns3: typo in the name of a constantChristophe JAILLET3-4/+4
All constant in 'enum HCLGE_MBX_OPCODE' start with HCLGE, except 'HLCGE_MBX_PUSH_VLAN_INFO' (C and L switched) s/HLC/HCL/ Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21kbuild: add net/netfilter/nf_tables_offload.h to header-test blacklist.Jeremy Sowden1-0/+1
net/netfilter/nf_tables_offload.h includes net/netfilter/nf_tables.h which is itself on the blacklist. Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jeremy Sowden <jeremy@azazel.net> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21tipc: Fix a typoChristophe JAILLET1-1/+1
s/tipc_toprsv_listener_data_ready/tipc_topsrv_listener_data_ready/ (r and s switched in topsrv) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21Merge tag 'mac80211-for-davem-2019-07-20' of ↵David S. Miller7-8/+25
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== We have a handful of fixes: * ignore bad CW parameters if we aren't using them, instead of warning * fix operation (and then build) with the new netlink vendor command policy requirement * fix a memory leak in an error path when setting beacons ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21Merge tag 'devicetree-fixes-for-5.3' of ↵Linus Torvalds11-122/+119
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree fixes from Rob Herring: "Fix several warnings/errors in validation of binding schemas" * tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples dt-bindings: iio: ad7124: Fix dtc warnings in example dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example dt-bindings: pinctrl: aspeed: Fix AST2500 example errors dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes dt-bindings: Ensure child nodes are of type 'object'
2019-07-21Merge branch 'work.misc' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs documentation typo fix from Al Viro. * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: typo fix: it's d_make_root, not d_make_inode...
2019-07-21Merge tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds8-31/+126
Pull cifs fixes from Steve French: "Two fixes for stable, one that had dependency on earlier patch in this merge window and can now go in, and a perf improvement in SMB3 open" * tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module number cifs: flush before set-info if we have writeable handles smb3: optimize open to not send query file internal info cifs: copy_file_range needs to strip setuid bits and update timestamps CIFS: fix deadlock in cached root handling
2019-07-21iommu/amd: fix a crash in iova_magazine_free_pfnsQian Cai1-1/+1
The commit b3aa14f02254 ("iommu: remove the mapping_error dma_map_ops method") incorrectly changed the checking from dma_ops_alloc_iova() in map_sg() causes a crash under memory pressure as dma_ops_alloc_iova() never return DMA_MAPPING_ERROR on failure but 0, so the error handling is all wrong. kernel BUG at drivers/iommu/iova.c:801! Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:iova_magazine_free_pfns+0x7d/0xc0 Call Trace: free_cpu_cached_iovas+0xbd/0x150 alloc_iova_fast+0x8c/0xba dma_ops_alloc_iova.isra.6+0x65/0xa0 map_sg+0x8c/0x2a0 scsi_dma_map+0xc6/0x160 pqi_aio_submit_io+0x1f6/0x440 [smartpqi] pqi_scsi_queue_command+0x90c/0xdd0 [smartpqi] scsi_queue_rq+0x79c/0x1200 blk_mq_dispatch_rq_list+0x4dc/0xb70 blk_mq_sched_dispatch_requests+0x249/0x310 __blk_mq_run_hw_queue+0x128/0x200 blk_mq_run_work_fn+0x27/0x30 process_one_work+0x522/0xa10 worker_thread+0x63/0x5b0 kthread+0x1d2/0x1f0 ret_from_fork+0x22/0x40 Fixes: b3aa14f02254 ("iommu: remove the mapping_error dma_map_ops method") Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-21hexagon: switch to generic version of pte allocationMike Rapoport1-32/+2
The hexagon implementation pte_alloc_one(), pte_alloc_one_kernel(), pte_free_kernel() and pte_free() is identical to the generic except of lack of __GFP_ACCOUNT for the user PTEs allocation. Switch hexagon to use generic version of these functions. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-21Merge tag 'ntb-5.3' of git://github.com/jonmason/ntbLinus Torvalds19-60/+1458
Pull NTB updates from Jon Mason: "New feature to add support for NTB virtual MSI interrupts, the ability to test and use this feature in the NTB transport layer. Also, bug fixes for the AMD and Switchtec drivers, as well as some general patches" * tag 'ntb-5.3' of git://github.com/jonmason/ntb: (22 commits) NTB: Describe the ntb_msi_test client in the documentation. NTB: Add MSI interrupt support to ntb_transport NTB: Add ntb_msi_test support to ntb_test NTB: Introduce NTB MSI Test Client NTB: Introduce MSI library NTB: Rename ntb.c to support multiple source files in the module NTB: Introduce functions to calculate multi-port resource index NTB: Introduce helper functions to calculate logical port number PCI/switchtec: Add module parameter to request more interrupts PCI/MSI: Support allocating virtual MSI interrupts ntb_hw_switchtec: Fix setup MW with failure bug ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function NTB: correct ntb_dev_ops and ntb_dev comment typos NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask() ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev() NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazed NTB: ntb_hw_amd: set peer limit register NTB: ntb_perf: Clear stale values in doorbell and command SPAD register NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers ...
2019-07-21typo fix: it's d_make_root, not d_make_inode...Al Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-07 07:02:33 +0300