Age | Commit message (Collapse) | Author | Files | Lines |
|
blk-cgroup.h pulls in blkdev.h and thus pretty much all the block
headers. Break this dependency chain by turning wbc_blkcg_css into a
macro and dropping the blk-cgroup.h include.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blkg->iostat_cpu
c3df5fb57fe8 ("cgroup: rstat: fix A-A deadlock on 32bit around
u64_stats_sync") made u64_stats updates irq-safe to avoid A-A deadlocks.
Unfortunately, the conversion missed one in blk_cgroup_bio_start(). Fix it.
Fixes: 2d146aa3aa84 ("mm: memcontrol: switch to rstat")
Cc: stable@vger.kernel.org # v5.13+
Reported-by: syzbot+9738c8815b375ce482a1@syzkaller.appspotmail.com
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/YWi7NrQdVlxD6J9W@slm.duckdns.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull libata fixes from Damien Le Moal:
"Two fixes for this cycle:
- Fix a null pointer dereference in ahci-platform driver (from Hai)
- Fix uninitialized variables in pata_legacy driver (from Dan)"
* tag 'libata-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: ahci_platform: fix null-ptr-deref in ahci_platform_enable_regulators()
pata_legacy: fix a couple uninitialized variable bugs
|
|
Pull block fixes from Jens Axboe:
"Bigger than usual for this point in time, the majority is fixing some
issues around BDI lifetimes with the move from the request_queue to
the disk in this release. In detail:
- Series on draining fs IO for del_gendisk() (Christoph)
- NVMe pull request via Christoph:
- fix the abort command id (Keith Busch)
- nvme: fix per-namespace chardev deletion (Adam Manzanares)
- brd locking scope fix (Tetsuo)
- BFQ fix (Paolo)"
* tag 'block-5.15-2021-10-17' of git://git.kernel.dk/linux-block:
block, bfq: reset last_bfqq_created on group change
block: warn when putting the final reference on a registered disk
brd: reduce the brd_devices_mutex scope
kyber: avoid q->disk dereferences in trace points
block: keep q_usage_counter in atomic mode after del_gendisk
block: drain file system I/O on del_gendisk
block: split bio_queue_enter from blk_queue_enter
block: factor out a blk_try_enter_queue helper
block: call submit_bio_checks under q_usage_counter
nvme: fix per-namespace chardev deletion
block/rnbd-clt-sysfs: fix a couple uninitialized variable bugs
nvme-pci: Fix abort command id
|
|
Pull io_uring fix from Jens Axboe:
"Just a single fix for a wrong condition for grabbing a lock, a
regression in this merge window"
* tag 'io_uring-5.15-2021-10-17' of git://git.kernel.dk/linux-block:
io_uring: fix wrong condition to grab uring lock
|
|
Pull virtio fixes from Michael Tsirkin:
"Fixes up some issues in rc5"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-vdpa: Fix the wrong input in config_cb
VDUSE: fix documentation underline warning
Revert "virtio-blk: Add validation for block size in config space"
vhost_vdpa: unset vq irq before freeing irq
virtio: write back F_VERSION_1 before validate
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a bug where guests on P9 with interrupts passed through could get
stuck in synchronize_irq().
- Fix a bug in KVM on P8 where secondary threads entering a guest would
write outside their allocated stack.
- Fix a bug in KVM on P8 where secondary threads could confuse the host
offline code and cause the guest or host to crash.
Thanks to Cédric Le Goater.
* tag 'powerpc-5.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Make idle_kvm_start_guest() return 0 if it went to guest
KVM: PPC: Book3S HV: Fix stack handling in idle_kvm_start_guest()
powerpc/xive: Discard disabled interrupts in get_irqchip_state()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Update section headers before the respective relocations to not
trigger a safety check in elftoolchain's implementation of libelf
- Do not add garbage data to the .rela.orc_unwind_ip section
* tag 'objtool_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Update section header before relocations
objtool: Check for gelf_update_rel[a] failures
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
- Log the "correct" uncorrectable error count in the armada_xp driver
* tag 'edac_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/armada-xp: Fix output of uncorrectable error counter
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Add Sapphire Rapids to the list of CPUs supporting the SMI count MSR
* tag 'perf_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/msr: Add Sapphire Rapids CPU support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Borislav Petkov:
"Forwarded from Ard Biesheuvel through the tip tree. Ard will send
stuff directly in the near future.
Low priority fixes but fixes nonetheless:
- update stub diagnostic print that is no longer accurate
- avoid statically allocated buffer for CPER error record decoding
- avoid sleeping on the efi_runtime semaphore when calling the
ResetSystem EFI runtime service"
* tag 'efi-urgent-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Change down_interruptible() in virt_efi_reset_system() to down_trylock()
efi/cper: use stack buffer for error record decoding
efi/libstub: Simplify "Exiting bootservices" message
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Do not enable AMD memory encryption in Kconfig by default due to
shortcomings of some platforms, leading to boot failures.
- Mask out invalid bits in the MXCSR for 32-bit kernels again because
Thomas and I don't know how to mask out bits properly. Third time's
the charm.
* tag 'x86_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Mask out the invalid MXCSR bits properly
x86/Kconfig: Do not enable AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT automatically
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core fixes for 5.15-rc6, all of which have
been in linux-next for a while with no reported issues.
They include:
- kernfs negative dentry bugfix
- simple pm bus fixes to resolve reported issues"
* tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: bus: Delete CONFIG_SIMPLE_PM_BUS
drivers: bus: simple-pm-bus: Add support for probing simple bus only devices
driver core: Reject pointless SYNC_STATE_ONLY device links
kernfs: don't create a negative dentry if inactive node exists
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes for 5.15-rc6 for reported
issues that include:
- habanalabs driver fixes
- mei driver fixes and new ids
- fpga new device ids
- MAINTAINER file updates for fpga subsystem
- spi module id table additions and fixes
- fastrpc locking fixes
- nvmem driver fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
eeprom: 93xx46: fix MODULE_DEVICE_TABLE
nvmem: Fix shift-out-of-bound (UBSAN) with byte size cells
mei: hbm: drop hbm responses on early shutdown
mei: me: add Ice Lake-N device id.
eeprom: 93xx46: Add SPI device ID table
eeprom: at25: Add SPI ID table
misc: HI6421V600_IRQ should depend on HAS_IOMEM
misc: fastrpc: Add missing lock before accessing find_vma()
cb710: avoid NULL pointer subtraction
misc: gehc: Add SPI ID table
MAINTAINERS: Drop outdated FPGA Manager website
MAINTAINERS: Add Hao and Yilun as maintainers
habanalabs: fix resetting args in wait for CS IOCTL
fpga: ice40-spi: Add SPI device ID table
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver fixes from Greg KH:
"Here are a number of small IIO and staging driver fixes for 5.15-rc6.
They include:
- vc04_services bugfix for reported problem
- r8188eu array underflow fix
- iio driver fixes for a lot of tiny reported issues.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: prevent array underflow in rtw_hal_update_ra_mask()
staging: vc04_services: shut up out-of-range warning
iio: light: opt3001: Fixed timeout error when 0 lux
iio: adis16480: fix devices that do not support sleep mode
iio: mtk-auxadc: fix case IIO_CHAN_INFO_PROCESSED
iio: adis16475: fix deadlock on frequency set
iio: ssp_sensors: add more range checking in ssp_parse_dataframe()
iio: ssp_sensors: fix error code in ssp_print_mcu_debug()
iio: adc: ad7793: Fix IRQ flag
iio: adc: ad7780: Fix IRQ flag
iio: adc: ad7192: Add IRQ flag
iio: adc: aspeed: set driver data when adc probe.
iio: adc: rzg2l_adc: add missing clk_disable_unprepare() in rzg2l_adc_pm_runtime_resume()
iio: adc: max1027: Fix the number of max1X31 channels
iio: adc: max1027: Fix wrong shift with 12-bit devices
iio: adc128s052: Fix the error handling path of 'adc128_probe()'
iio: adc: rzg2l_adc: Fix -EBUSY timeout error return
iio: accel: fxls8962af: return IRQ_HANDLED when fifo is flushed
iio: dac: ti-dac5571: fix an error code in probe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fix from Greg KH:
"Here is a single 8250 Kconfig fix for 5.15-rc6 that resolves a
regression that showed up in 5.15-rc1. It has been in linux-next for a
while with no reported issues"
* tag 'tty-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250: allow disabling of Freescale 16550 compile test
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes that resolve a number of tiny issues.
They include:
- new USB serial driver ids
- xhci driver fixes for a bunch of issues
- musb error path fixes.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: musb: dsps: Fix the probe error path
xhci: Enable trust tx length quirk for Fresco FL11 USB controller
xhci: Fix command ring pointer corruption while aborting a command
USB: xhci: dbc: fix tty registration race
xhci: add quirk for host controllers that don't update endpoint DCS
xhci: guard accesses to ep_state in xhci_endpoint_reset()
USB: serial: qcserial: add EM9191 QDL support
USB: serial: option: add Quectel EC200S-CN module support
USB: serial: option: add prod. id for Quectel EG91
USB: serial: option: add Telit LE910Cx composition 0x1204
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a new product ID for the xpad joystick driver
- fixes to resistive-adc-touch and snvs_pwrkey drivers
- a change to touchscreen helpers to make clang happier
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: touchscreen - avoid bitwise vs logical OR warning
Input: xpad - add support for another USB ID of Nacon GC-100
Input: resistive-adc-touch - fix division by zero error on z1 == 0
Input: snvs_pwrkey - add clk handling
|
|
Since commit 430a67f9d616 ("block, bfq: merge bursts of newly-created
queues"), BFQ maintains a per-group pointer to the last bfq_queue
created. If such a queue, say bfqq, happens to move to a different
group, then bfqq is no more a valid last bfq_queue created for its
previous group. That pointer must then be cleared. Not resetting such
a pointer may also cause UAF, if bfqq happens to also be freed after
being moved to a different group. This commit performs this missing
reset. As such it fixes commit 430a67f9d616 ("block, bfq: merge bursts
of newly-created queues").
Such a missing reset is most likely the cause of the crash reported in [1].
With some analysis, we found that this crash was due to the
above UAF. And such UAF did go away with this commit applied [1].
Anyway, before this commit, that crash happened to be triggered in
conjunction with commit 2d52c58b9c9b ("block, bfq: honor already-setup
queue merges"). The latter was then reverted by commit ebc69e897e17
("Revert "block, bfq: honor already-setup queue merges""). Yet commit
2d52c58b9c9b ("block, bfq: honor already-setup queue merges") contains
no error related with the above UAF, and can then be restored.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=214503
Fixes: 430a67f9d616 ("block, bfq: merge bursts of newly-created queues")
Tested-by: Grzegorz Kowal <custos.mentis@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20211015144336.45894-2-paolo.valente@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Warn when the last reference on a live disk is put without calling
del_gendisk first. There are some BDI related bug reports that look
like a case of this, so make sure we have the proper instrumentation
to catch it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211014130231.1468538-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
As with commit 8b52d8be86d72308 ("loop: reorder loop_exit"),
unregister_blkdev() needs to be called first in order to avoid calling
brd_alloc() from brd_probe() after brd_del_one() from brd_exit(). Then,
we can avoid holding global mutex during add_disk()/del_gendisk() as with
commit 1c500ad706383f1a ("loop: reduce the loop_ctl_mutex scope").
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/e205f13d-18ff-a49c-0988-7de6ea5ff823@i-love.sakura.ne.jp
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix 'perf test evsel' build error on !x86 architectures
- Fix libperf's test_stat_cpu mixup of CPU numbers and CPU indexes
- Output offsets for decompressed records, not just useless zeros
* tag 'perf-tools-fixes-for-v5.15-2021-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
libperf tests: Fix test_stat_cpu
libperf test evsel: Fix build error on !x86 architectures
perf report: Output non-zero offset for decompressed records
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix handling of NOMAP regions with kmemleak.
NOMAP regions don't have linear map entries so an attempt to scan
these areas in kmemleak would fault.
Prevent such faults by excluding NOMAP regions from kmemleak"
* tag 'fixes-2021-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: exclude NOMAP regions from kmemleak
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Tracing fixes for 5.15:
- Fix defined but not use warning/error for osnoise function
- Fix memory leak in event probe
- Fix memblock leak in bootconfig
- Fix the API of event probes to be like kprobes
- Added test to check removal of event probe API
- Fix recordmcount.pl for nds32 failed build
* tag 'trace-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
nds32/ftrace: Fix Error: invalid operands (*UND* and *UND* sections) for `^'
selftests/ftrace: Update test for more eprobe removal process
tracing: Fix event probe removal from dynamic events
tracing: Fix missing * in comment block
bootconfig: init: Fix memblock leak in xbc_make_cmdline()
tracing: Fix memory leak in eprobe_register()
tracing: Fix missing osnoise tracer on max_latency
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk driver fixes from Stephen Boyd:
"Clk driver fixes for critical issues found in the past few weeks:
- Select gdsc config so qcom sm6350 driver probes
- Fix a register offset in qcom gcc-sm6115 so the correct clk is
controlled
- Fix inverted logic in Renesas RZ/G2L .is_enabled()
- Mark some more clks critical in Renesas clk driver
- Remove a duplicate clk in the agilex driver"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: add select QCOM_GDSC for SM6350
clk: qcom: gcc-sm6115: Fix offset for hlos1_vote_turing_mmu_tbu0_gdsc
clk: socfpga: agilex: fix duplicate s2f_user0_clk
clk: renesas: rzg2l: Fix clk status function
clk: renesas: r9a07g044: Mark IA55_CLK and DMAC_ACLK critical
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM verity target to skip redundant processing on I/O errors.
- Fix request-based DM so that it doesn't queue request to blk-mq when
DM device is suspended.
- Fix DM core mempool NULL pointer race when completing IO.
- Make DM clone target's 'descs' array static.
* tag 'for-5.15/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: fix mempool NULL pointer race when completing IO
dm rq: don't queue request to blk-mq during DM suspend
dm clone: make array 'descs' static
dm verity: skip redundant verity_handle_err() on I/O errors
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Maintainers and reviewers changes:
* Cornelia decided to free up her time and step down from vfio-ccw
maintainer and s390 kvm reviewer duties
* Add Alexander Gordeev as s390 arch code reviewer
- Fix broken strrchr implementation
* tag 's390-5.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: add Alexander Gordeev as reviewer
s390: fix strrchr() implementation
vfio-ccw: step down as maintainer
KVM: s390: remove myself as reviewer
|
|
Pull csky fixes from Guo Ren:
"Only 5 fixups:
- Make HAVE_TCM depend on !COMPILE_TEST
- bitops: Remove duplicate __clear_bit define
- Select ARCH_WANT_FRAME_POINTERS only if compiler supports it
- Fixup regs.sr broken in ptrace
- don't let sigreturn play with priveleged bits of status register"
* tag 'csky-for-linus-5.15-rc6' of git://github.com/c-sky/csky-linux:
csky: Make HAVE_TCM depend on !COMPILE_TEST
csky: bitops: Remove duplicate __clear_bit define
csky: Select ARCH_WANT_FRAME_POINTERS only if compiler supports it
csky: Fixup regs.sr broken in ptrace
csky: don't let sigreturn play with priveleged bits of status register
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fix from Vineet Gupta:
"Small fixlet for ARC"
* tag 'arc-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: fix potential build snafu
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A small number fixes this time, mostly touching actual code:
- Add platform device for i.MX System Reset Controller (SRC) to
fix a regression caused by fw_devlink change
- A fixup for a boot regression caused by my own rework for the
Qualcomm SCM driver
- Multiple bugfixes for the Arm FFA and optee firmware drivers,
addressing problems when they are built as a loadable module
- Four dts bugfixes for the Broadcom SoC used in Raspberry pi,
addressing VEC (video encoder), MDIO bus controller
#address-cells/#size-cells, SDIO voltage and PCIe host bridge
dtc warnings"
* tag 'arm-soc-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: imx: register reset controller from a platform driver
iommu/arm: fix ARM_SMMU_QCOM compilation
ARM: dts: bcm2711-rpi-4-b: Fix usb's unit address
ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formatting
tee: optee: Fix missing devices unregister during optee_remove
ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator states
ARM: dts: bcm2711: fix MDIO #address- and #size-cells
ARM: dts: bcm283x: Fix VEC address for BCM2711
firmware: arm_ffa: Fix __ffa_devices_unregister
firmware: arm_ffa: Add missing remove callback to ffa_bus_type
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fix from Bjorn Helgaas:
- Don't save msi_populate_sysfs() error code as dev->msi_irq_groups so
we don't dereference the error code as a pointer (Wang Hai)
* tag 'pci-v5.15-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/MSI: Handle msi_populate_sysfs() errors correctly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Add a missing device ID to a quirk list in the suspend-to-idle support
code"
* tag 'acpi-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PM: Include alternate AMDI0005 id in special behaviour
|
|
This is a fix for the fix (yeah, /facepalm).
The correct mask to use is not the negation of the MXCSR_MASK but the
actual mask which contains the supported bits in the MXCSR register.
Reported and debugged by Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: d298b03506d3 ("x86/fpu: Restore the masking out of reserved MXCSR bits")
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ser Olmy <ser.olmy@protonmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YWgYIYXLriayyezv@intel.com
|
|
A new warning in clang points out a few places in this driver where a
bitwise OR is being used with boolean types:
drivers/input/touchscreen.c:81:17: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This use of a bitwise OR is intentional, as bitwise operations do not
short circuit, which allows all the calls to touchscreen_get_prop_u32()
to happen so that the last parameter is initialized while coalescing the
results of the calls to make a decision after they are all evaluated.
To make this clearer to the compiler, use the '|=' operator to assign
the result of each touchscreen_get_prop_u32() call to data_present,
which keeps the meaning of the code the same but makes it obvious that
every one of these calls is expected to happen.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20211014205757.3474635-1-nathan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The Nacon GX100XF is already mapped, but it seems there is a Nacon
GC-100 (identified as NC5136Wht PCGC-100WHITE though I believe other
colours exist) with a different USB ID when in XInput mode.
Signed-off-by: Michael Cullen <michael@michaelcullen.name>
Link: https://lore.kernel.org/r/20211015192051.5196-1-michael@michaelcullen.name
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
For proper pressure calculation we need at least x and z1 to be non
zero. Even worse, in case z1 we may run in to division by zero
error.
Fixes: 60b7db914ddd ("Input: resistive-adc-touch - rework mapping of channels")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20211007095727.29579-1-o.rempel@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
On i.MX7S and i.MX8M* (but not i.MX6*) the pwrkey device has an
associated clock. Accessing the registers requires that this clock is
enabled. Binding the driver on at least i.MX7S and i.MX8MP while not
having the clock enabled results in a complete hang of the machine.
(This usually only happens if snvs_pwrkey is built as a module and the
rtc-snvs driver isn't already bound because at bootup the required clk
is on and only gets disabled when the clk framework disables unused clks
late during boot.)
This completes the fix in commit 135be16d3505 ("ARM: dts: imx7s: add
snvs clock to pwrkey").
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211013062848.2667192-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
q->disk becomes invalid after the gendisk is removed. Work around this
by caching the dev_t for the tracepoints. The real fix would be to
properly tear down the I/O schedulers with the gendisk, but that is
a much more invasive change.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211012093301.GA27795@lst.de
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Don't switch back to percpu mode to avoid the double RCU grace period
when tearing down SCSI devices. After removing the disk only passthrough
commands can be send anyway.
Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20210929071241.934472-6-hch@lst.de
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Instead of delaying draining of file system I/O related items like the
blk-qos queues, the integrity read workqueue and timeouts only when the
request_queue is removed, do that when del_gendisk is called. This is
important for SCSI where the upper level drivers that control the gendisk
are separate entities, and the disk can be freed much earlier than the
request_queue, or can even be unbound without tearing down the queue.
Fixes: edb0872f44ec ("block: move the bdi from the request_queue to the gendisk")
Reported-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20210929071241.934472-5-hch@lst.de
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
To prepare for fixing a gendisk shutdown race, open code the
blk_queue_enter logic in bio_queue_enter. This also removes the
pointless flags translation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20210929071241.934472-4-hch@lst.de
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Factor out the code to try to get q_usage_counter without blocking into
a separate helper. Both to improve code readability and to prepare for
splitting bio_queue_enter from blk_queue_enter.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20210929071241.934472-3-hch@lst.de
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Ensure all bios check the current values of the queue under freeze
protection, i.e. to make sure the zero capacity set by del_gendisk
is actually seen before dispatching to the driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210929071241.934472-2-hch@lst.de
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
I received a build failure for a new patch I'm working on the nds32
architecture, and when I went to test it, I couldn't get to my build error,
because it failed to build with a bunch of:
Error: invalid operands (*UND* and *UND* sections) for `^'
issues with various files. Those files were temporary asm files that looked
like: kernel/.tmp_mc_fork.s
I decided to look deeper, and found that the "mc" portion of that name
stood for "mcount", and was created by the recordmcount.pl script. One that
I wrote over a decade ago. Once I knew the source of the problem, I was
able to investigate it further.
The way the recordmcount.pl script works (BTW, there's a C version that
simply modifies the ELF object) is by doing an "objdump" on the object
file. Looks for all the calls to "mcount", and creates an offset of those
locations from some global variable it can use (usually a global function
name, found with <.*>:). Creates a asm file that is a table of references
to these locations, using the found variable/function. Compiles it and
links it back into the original object file. This asm file is called
".tmp_mc_<object_base_name>.s".
The problem here is that the objdump produced by the nds32 object file,
contains things that look like:
0000159a <.L3^B1>:
159a: c6 00 beqz38 $r6, 159a <.L3^B1>
159a: R_NDS32_9_PCREL_RELA .text+0x159e
159c: 84 d2 movi55 $r6, #-14
159e: 80 06 mov55 $r0, $r6
15a0: ec 3c addi10.sp #0x3c
Where ".L3^B1 is somehow selected as the "global" variable to index off of.
Then the assembly file that holds the mcount locations looks like this:
.section __mcount_loc,"a",@progbits
.align 2
.long .L3^B1 + -5522
.long .L3^B1 + -5384
.long .L3^B1 + -5270
.long .L3^B1 + -5098
.long .L3^B1 + -4970
.long .L3^B1 + -4758
.long .L3^B1 + -4122
[...]
And when it is compiled back to an object to link to the original object,
the compile fails on the "^" symbol.
Simple solution for now, is to have the perl script ignore using function
symbols that have an "^" in the name.
Link: https://lkml.kernel.org/r/20211014143507.4ad2c0f7@gandalf.local.home
Cc: stable@vger.kernel.org
Acked-by: Greentime Hu <green.hu@gmail.com>
Fixes: fbf58a52ac088 ("nds32/ftrace: Add RECORD_MCOUNT support")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
In the big pgtable header split, I inadvertently introduced a couple of
duplicate symbols.
Fixes: fe6cb7b043b69cd9 ("ARC: mm: disintegrate pgtable.h into levels and flags")
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
|
|
Building csky:allmodconfig results in the following build errors.
arch/csky/mm/tcm.c:9:2: error:
#error "You should define ITCM_RAM_BASE"
9 | #error "You should define ITCM_RAM_BASE"
| ^~~~~
arch/csky/mm/tcm.c:14:2: error:
#error "You should define DTCM_RAM_BASE"
14 | #error "You should define DTCM_RAM_BASE"
| ^~~~~
arch/csky/mm/tcm.c:18:2: error:
#error "You should define correct DTCM_RAM_BASE"
18 | #error "You should define correct DTCM_RAM_BASE"
This is seen with compile tests since those enable HAVE_TCM,
but do not provide useful default values for ITCM_RAM_BASE or
DTCM_RAM_BASE. Disable HAVE_TCM for commpile tests to avoid
the error.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guo Ren <guoren@kernel.org>
|
|
Building csky:allmodconfig results in the following build error.
In file included from ./include/linux/bitops.h:33,
from ./include/linux/log2.h:12,
from kernel/bounds.c:13:
./arch/csky/include/asm/bitops.h:77: error: "__clear_bit" redefined
Since commit 9248e52fec95 ("locking/atomic: simplify non-atomic wrappers"),
__clear_bit is defined in include/asm-generic/bitops/non-atomic.h,
and the define in the csky include file is no longer necessary or useful.
Remove it.
Fixes: 9248e52fec95 ("locking/atomic: simplify non-atomic wrappers")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guo Ren <guoren@kernel.org>
|
|
Compiling csky:allmodconfig with an upstream C compiler results
in the following error.
csky-linux-gcc: error:
unrecognized command-line option '-mbacktrace';
did you mean '-fbacktrace'?
Select ARCH_WANT_FRAME_POINTERS only if gcc supports it to
avoid the error.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guo Ren <guoren@kernel.org>
|
|
gpr_get() return the entire pt_regs (include sr) to userspace, if we
don't restore the C bit in gpr_set, it may break the ALU result in
that context. So the C flag bit is part of gpr context, that's why
riscv totally remove the C bit in the ISA. That makes sr reg clear
from userspace to supervisor privilege.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
|