summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-02-09wireless: update radiotap parserJohannes Berg4-130/+271
Upstream radiotap has adopted the namespace proposal David Young made and I then took care of, for which I had adapted the radiotap parser as a library outside the kernel. This brings the in-kernel parser up to speed. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-09mac80211_hwsim: add fake hw scan handlerJohannes Berg1-1/+43
For debugging hardware scan trigger/complete functionality, it was useful to have code in hwsim that pretends to do a hardware scan. This code could be extended to actually do the scan, but for now it was sufficient for me to only pretend. Since hwsim was written to ease debugging, it only makes sense to add it to it permanently. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-09Merge branch 'master' of ↵John W. Linville10-22/+40
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: net/mac80211/scan.c
2010-02-09mac80211: fix deferred hardware scan requestsJohannes Berg1-8/+10
Reinette found the reason for the warnings that happened occasionally when a hw-offloaded scan finished; her description of the problem: mac80211 will defer the handling of scan requests if it is busy with management work at the time. The scan requests are deferred and run after the work has completed. When this occurs there are currently two problems. * The scan request for hardware scan is not fully populated with the band and channels to scan not initialized. * When the scan is queued the state is not correctly updated to reflect that a scan is in progress. The problem here is that when the driver completes the scan and calls ieee80211_scan_completed() a warning will be triggered since mac80211 was not aware that a scan was in progress. The reason is that the queued scan work will start the hw scan right away when the hw_scan_req struct has already been allocated. However, in the first pass it will not have been filled, which happens at the same time as setting the bits. To fix this, simply move the allocation after the pending work test as well, so that the first iteration of the scan work will call __ieee80211_start_scan() even in the hardware scan case. Bug-identified-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-09iwlwifi: Fix to set correct ht configurationWey-Yi Guy1-0/+1
iwl_set_rxon_ht() only get called in iwl_post_associate(); which cause possible incorrect ht configuration. Adding the call in iwl_mac_config() if IEEE80211_CONF_CHANGE_CHANNEL flag is set to re-configure and send rxon command. Fixes http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2146 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> CC: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-09mac80211: Fix probe request filtering in IBSS modeBenoit Papillault1-1/+1
We only reply to probe request if either the requested SSID is the broadcast SSID or if the requested SSID matches our own SSID. This latter case was not properly handled since we were replying to different SSID with the same length as our own SSID. Signed-off-by: Benoit Papillault <benoit.papillault@free.fr> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-04ssb: Fix CONFIG_SSB_SDIOHOST typoMichael Buesch1-2/+1
This fixes a CONFIG_SSB_SDIOHOST typo. Signed-off-by: Michael Buesch <mb@bu3sch.de> Reported-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de> Tested-By: Albert Herranz <albert_herranz@yahoo.es> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-04b43: Fix throughput regressionLarry Finger2-3/+11
Commit c7ab5ef9bcd281135c21b4732c9be779585181be entitled "b43: implement short slot and basic rate handling" reduced the transmit throughput for my BCM4311 device from 18 Mb/s to 0.7 Mb/s. The basic rate handling portion is OK, the problem is in the short slot handling. Prior to this change, the short slot enable/disable routines were never called. Experimentation showed that the critical part was changing the value at offset 0x0010 in the shared memory. This is supposed to contain the 802.11 Slot Time in usec, but if it is changed from its initial value of zero, performance is destroyed. On the other hand, changing the value in the MMIO register corresponding to the Interframe Slot Time increased performance from 18 to 22 Mb/s. A BCM4306/3 also shows dramatic improvement of the transmit rate from 5.3 to 19.0 Mb/s. Other changes in the patch include removal of the magic number for the MMIO register, and allowing the slot time to be set for any PHY operating in the 2.4 GHz band. Previously, the routine was executed only for G PHYs. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> [Any stable version back through 2.6.28] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-03ath9k: add support for 802.11n bonded out AR2427Luis R. Rodriguez4-2/+11
Some single chip family devices are sold in the market with 802.11n bonded out, these have no hardware capability for 802.11n but ath9k can still support them. These are called AR2427. Cc: stable@kernel.org Reported-by: Rolf Leggewie <bugzilla.kernel.org@rolf.leggewie.biz> Tested-by: Bernhard Reiter <ockham@raz.or.at> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-03airo: fix setting zero length WEP keyStanislaw Gruszka1-16/+18
Patch prevents call set_wep_key() with zero key length. That fix long standing regression since commit c0380693520b1a1e4f756799a0edc379378b462a "airo: clean up WEP key operations". Additionally print call trace when someone will try to use improper parameters, and remove key.len = 0 assignment, because it is in not possible code path. Reported-by: Chris Siebenmann <cks-rhbugzilla@cs.toronto.edu> Bisected-by: Chris Siebenmann <cks-rhbugzilla@cs.toronto.edu> Tested-by: Chris Siebenmann <cks@cs.toronto.edu> Cc: Dan Williams <dcbw@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-03lib80211: Introduce TKIP_HDR_LEN define for code clarityAndriy Tkachuk1-10/+10
Introduce TKIP_HDR_LEN define for code clarity (in the same way as CCMP_HDR_LEN). Also odd len variable (not used) dropped from lib80211_tkip_hdr(). Signed-off-by: Andriy V. Tkachuk <andrit@ukr.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-03lib80211: Cosmetics - make room for MIC/CRC near the actual calculationAndriy Tkachuk2-3/+2
Signed-off-by: Andriy V. Tkachuk <andrit@ukr.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01ath9k: fix access to freed data on unloadPavel Roskin4-29/+7
Calling ath_bus_cleanup() after ieee80211_free_hw() resulted in access to common->bus_ops, which is already freed as part of the device data. Remove the cleanup field in struct ath_bus_ops, as it was never used properly. Remove ath_bus_cleanup(). Merge cleanup functions in place of the ath_bus_cleanup() calls. Take care not to use any device data after ieee80211_free_hw(). Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01ps3_gelic_wireless: Remove superfluous debug infoHamish Guthrie1-2/+1
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01mac80211: Don't call rate control when HW handles itVasanthakumar1-0/+4
Rate control should not be called to update the tx status when HW does the RC. Signed-off-by: Vasanthakumar <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01mac80211: fix sta lookup with AP VLAN interfaces and injected framesFelix Fietkau1-0/+2
When injecting frames, mac80211 currently looks for the first AP interface that matches the source address of the injected frame. This breaks when such a frame is directed at a STA that has been moved to a VLAN. This patch fixes it by using sta_info_get_bss instead of sta_info_get, which also finds stations belonging to a VLAN interface of the same BSS as the AP interface. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01mac80211: fix monitor mode tx radiotap header handlingFelix Fietkau2-2/+7
When an injected frame gets buffered for a powersave STA or filtered and retransmitted, mac80211 attempts to parse the radiotap header again, which doesn't work because it's gone at that point. This patch adds a new flag for checking the availability of a radiotap header, so that it only attempts to parse it once, reusing the tx info on the next call to ieee80211_tx(). This fixes severe issues with rekeying in AP mode. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01mac80211: fix sta lookup for received action frames on an AP VLANFelix Fietkau1-2/+2
When looking for a matching interface, __ieee80211_rx_handle_packet loops over all active interfaces, looking for matching stations. Because AP VLAN interfaces are not processed as part of this loop, it needs to use sta_info_get_bss instead of sta_info_get in order to find a STA that has been moved to a VLAN. This fixes issues with aggregation setup/teardown. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01mac80211: reduce stack usage in sta_agg_status_read()Pavel Roskin1-11/+13
Use a more compact and readable format for "agg_status" to reduce the stack frame to less than 1024 bytes. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01mac80211: reduce stack usage in sta_ht_capa_read()Pavel Roskin1-1/+1
The maximal size of the "ht_capa" file is 430 bytes. In most cases, it's much shorter. Use a 512 byte long buffer. 1024 bytes is too much and causes a warning with CONFIG_FRAME_WARN=1024. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01b43: N-PHY: implement setting RF sequenceRafał Miłecki1-4/+31
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01b43: N-PHY: add TX radio setup for newer PHYsRafał Miłecki1-1/+52
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01b43: N-PHY: fix Cal TX IQ LO for newer PHYsRafał Miłecki1-1/+11
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01b43: N-PHY: add RSSI selection for newer PHYsRafał Miłecki1-1/+83
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01b43: N-PHY: split RSSI selection into two per-PHY-revision functionsRafał Miłecki1-49/+52
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01cfg80211: add regulatory hint disconnect supportLuis R. Rodriguez4-3/+213
This adds a new regulatory hint to be used when we know all devices have been disconnected and idle. This can happen when we suspend, for instance. When we disconnect we can no longer assume the same regulatory rules learned from a country IE or beacon hints are applicable so restore regulatory settings to an initial state. Since driver hints are cached on the wiphy that called the hint, those hints are not reproduced onto cfg80211 as the wiphy will respect its own wiphy->regd regardless. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01cfg80211: avoid flushing the global workqueue for core reg hintsLuis R. Rodriguez1-3/+1
When cfg80211 starts it will send a core regulatory hint. This is sent to the global workqueue but we force processing of it by flushing the global workqueue. The flushing was done since cfg80211 needs last_request to always be populated. Avoid flushing the global workqueue by processing the work required immediately instead of putting it into a linked list and processing it after the flush. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01b43: N-PHY: add workarounds for gain controlRafał Miłecki1-1/+129
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01b43: N-PHY: update general workaroundsRafał Miłecki2-104/+115
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01ath9k: allocate string buffer in read_file_dma() by kmalloc()Pavel Roskin1-17/+26
Using stack for that causes warnings with CONFIG_FRAME_WARN=1024 Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01ath: make gcc check format arguments of ath_print(), fix all misusesPavel Roskin4-9/+9
Numeric channel is hard to get, so it won't be printed. Replace Mhz with MHz on the affected lines and add commas as needed. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01ps3_gelic_wireless: fix format warningJohn W. Linville1-1/+1
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-29iwlwifi: iwl_power_update_mode always hold mutexReinette Chatre2-1/+3
iwl_power_update_mode expects to be called with mutex held, for example to protect priv->vif. Only one caller currently does not do this, fix this. Also, add a comment to iwl_power_update_mode to indicate this requirement. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlwifi: fix typo in IWL_CCK_RATES_MASKJohannes Berg1-1/+1
Due to a typo, the variable contains OFDM rates as well. The only user doesn't care, so this change doesn't really do anything but fix up my confusion. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2010-01-29iwlwifi: remove unused work structsJohannes Berg1-4/+0
auth_work, calibrated_work, update_link_led and report_work are never used, so remove them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlwifi: remove bg_up workJohannes Berg3-29/+14
There's no need to queue a work struct from within a work struct, just move the code to execute directly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlagn: simplify ucode loadingJohannes Berg1-41/+22
Move the waiting into iwl5000_load_section instead of duplicating it in the caller. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlwifi: no need to test iw_mode in power savingJohannes Berg1-2/+1
mac80211 will only enable powersaving for station mode. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlwifi: update sensitivity calibration data for 1000 seriesWey-Yi Guy1-1/+71
Update sensitivity range values for 1000 series Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlwifi: update sensitivity calibration data for 5x00 seriesWey-Yi Guy1-2/+2
Update sensitivity range values for 5x00 series Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlwifi: update sensitivity calibration data for 6x00 seriesWey-Yi Guy1-1/+1
Update sensitivity range values for 6000 & 6x50 series Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlwifi: fix locking in iwl_mac_add_interfaceJohannes Berg1-8/+7
The corresponding iwl_mac_remove_interface only acquires the mutex, leading me to believe that the spinlock is not necessary. However, this doesn't actually acquire the mutex around the vif pointer check and assignment, fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlwifi: sysassert identifier changeWey-Yi Guy1-1/+1
Change in uCode to include a unique identifier as part of sysassert, in order to tell the difference, add the "ADVANCED SYSASSERT" description when dump nic error to indicate the difference. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlwifi: optimize power savingDaniel Halperin1-0/+2
In hostap AP mode, every time the client sends the AP a packet the STA_NOTIFY_AWAKE code is sent from mac80211. This results in a command being sent to the uCode even if the client was not asleep. The following simple patch has fixed the issue for me without any degradation that I can find. Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29ath9k: Handle full sleep in ps_restore.Vivek Natarajan2-2/+7
IDLE PS (Full Sleep) doesn't work when ifconfig up is done during Idle unassociated state. Fix this by restoring FULL SLEEP in ps_restore if CONF_IDLE is set. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-28ps3_gelic_wireless: fix directed ssid scanHamish Guthrie1-6/+9
If the association worker requests a directed ssid scan and a bss list already exists, the directed scan is not done. This patch corrects this and cleans up a few typos and debug messages. Signed-off-by: Hamish Guthrie <hamish.guthrie@sonycom.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-28ps3_gelic_wireless: Remove PS3 gelic legacy wpa supportHamish Guthrie4-153/+0
The current PS3 gelic wireless driver has support for wireless extensions. The original PS3 gelic wireless driver exposed a dedicated API for a dedicated wpa_supplicant driver. This old API could be enabled with CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE, however, as this is not being used by any distros, and it is being removed from the driver and from wpa_supplicant. Signed-off-by: Hamish Guthrie <hamish.guthrie@sonycom.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-27cfg80211: fix wext-compat for setting rate to 'auto'John W. Linville1-1/+1
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-27rtl8187: Add callback for get_tsfLarry Finger1-1/+10
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-27b43: N PHY: Fix compilation after removal of typdef b43_c32Larry Finger1-2/+2
In the conversion between typedef and struct, two places that needed a "struct" were missed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-29 00:25:48 +0300