| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In preparation for enabling HW semaphores, we need to keep in flight
timeline HWSP alive until its use across entire system has completed,
as any other timeline active on the GPU may still refer back to the
already retired timeline. We both have to delay recycling available
cachelines and unpinning old HWSP until the next idle point.
An easy option would be to simply keep all used HWSP until the system as
a whole was idle, i.e. we could release them all at once on parking.
However, on a busy system, we may never see a global idle point,
essentially meaning the resource will be leaked until we are forced to
do a GC pass. We already employ a fine-grained idle detection mechanism
for vma, which we can reuse here so that each cacheline can be freed
immediately after the last request using it is retired.
v3: Keep track of the activity of each cacheline.
v4: cacheline_free() on canceling the seqno tracking
v5: Finally with a testcase to exercise wraparound
v6: Pack cacheline into empty bits of page-aligned vaddr
v7: Use i915_utils to hide the pointer casting around bit manipulation
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190301170901.8340-2-chris@chris-wilson.co.uk
|
|
On unwinding the active request we give it a small (limited to internal
priority levels) boost to prevent it from being gazumped a second time.
However, this means that it can be promoted to above the request that
triggered the preemption request, causing a preempt-to-idle cycle for no
change. We can avoid this if we take the boost into account when
checking if the preemption request is valid.
v2: After preemption the active request will be after the preemptee if
they end up with equal priority.
v3: Tvrtko pointed out that this, the existing logic, makes
I915_PRIORITY_WAIT non-preemptible. Document this interesting quirk!
v4: Prove Tvrtko was right about WAIT being non-preemptible and test it.
v5: Except not all priorities were made equal, and the WAIT not preempting
is only if we start off as !NEWCLIENT.
v6: More commentary after coming to an understanding about what I had
forgotten to say.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190301170901.8340-1-chris@chris-wilson.co.uk
|
|
There is no point in whitelisting a register that the user then cannot
write to, so check the register exists before merging such patches.
v2: Mark SLICE_COMMON_ECO_CHICKEN1 [731c] as write-only
v3: Use different variables for different meanings!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dale B Stimson <dale.b.stimson@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190301140404.26690-6-chris@chris-wilson.co.uk
Link: https://patchwork.freedesktop.org/patch/msgid/20190301160108.19039-1-chris@chris-wilson.co.uk
|
|
The icl wm1+ underrun w/a has been added to the spec. It changed
slightly from the previous incarnation by requiring that we mirror
the lines watermark and the ignore lines bit from WM0 into WM1.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190228173639.18422-1-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Tested-by: Clint Taylor <Clinton.A.Taylor@intel.com>
|
|
A simple mutex used for guarding the flow of requests in and out of the
timeline. In the short-term, it will be used only to guard the addition
of requests into the timeline, taken on alloc and released on commit so
that only one caller can construct a request into the timeline
(important as the seqno and ring pointers must be serialised). This will
be used by observers to ensure that the seqno/hwsp is stable. Later,
when we have reduced retiring to only operate on a single timeline at a
time, we can then use the mutex as the sole guard required for retiring.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190301110547.14758-2-chris@chris-wilson.co.uk
|
|
WAIT is occasionally suppressed by virtue of preempted requests being
promoted to NEWCLIENT if they have not all ready received that boost.
Make this consistent for all WAIT boosts that they are not allowed to
preempt executing contexts and are merely granted the right to be at the
front of the queue for the next execution slot. This is in keeping with
the desire that the WAIT boost be a minor tweak that does not give
excessive promotion to its user and open ourselves to trivial abuse.
The problem with the inconsistent WAIT preemption becomes more apparent
as the preemption is propagated across the engines, where one engine may
preempt and the other not, and we be relying on the exact execution
order being consistent across engines (e.g. using HW semaphores to
coordinate parallel execution).
v2: Also protect GuC submission from false preemption loops.
v3: Build bug safeguards and better debug messages for st.
v4: Do the priority bumping in unsubmit (i.e. on preemption/reset
unwind), applying it earlier during submit causes out-of-order execution
combined with execute fences.
v5: Call sw_fence_fini for our dummy request (Matthew)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190228220639.3173-1-chris@chris-wilson.co.uk
|
|
Gcc has a slight preference if we use __ffs() to subtract one from the
index once rather than each use:
__execlists_submission_tasklet 2867 2847 -20
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190226102404.29153-11-chris@chris-wilson.co.uk
|
|
We currently use a worker queued from an rcu callback to determine when
a how grace period has elapsed while we remained idle. We use this idle
delay to infer that we will be idle for a while and this is a suitable
point at which we can trim our global memory caches.
Since we wrote that, this mechanism now exists as rcu_work, and having
converted the idle shrinkers over to using that, we can remove our own
variant.
v2: Say goodbye to gt.epoch as well.
v3: Remove the misplaced and redundant comment before parking globals
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190228102035.5857-3-chris@chris-wilson.co.uk
|
|
As our allocations are not device specific, we can move our slab caches
to a global scope.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190228102035.5857-2-chris@chris-wilson.co.uk
|
|
As kmem_caches share the same properties (size, allocation/free behaviour)
for all potential devices, we can use global caches. While this
potential has worse fragmentation behaviour (one can argue that
different devices would have different activity lifetimes, but you can
also argue that activity is temporal across the system) it is the
default behaviour of the system at large to amalgamate matching caches.
The benefit for us is much reduced pointer dancing along the frequent
allocation paths.
v2: Defer shrinking until after a global grace period for futureproofing
multiple consumers of the slab caches, similar to the current strategy
for avoiding shrinking too early.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190228102035.5857-1-chris@chris-wilson.co.uk
|
|
If we have parked, then we must have passed an idleness test and still
be idle. We chose not to use this shortcut in the past so that we could
use the idleness test at any time and inspect HW. However, some HW like
Sandybridge, doesn't like being woken up frivolously, so avoid doing so.
References: 0b702dca2658 ("drm/i915: Avoid waking the engines just to check if they are idle")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190227214159.7946-1-chris@chris-wilson.co.uk
|
|
This reverts commit 0b702dca26580e3bbfbbaf22dfc29280b6263414.
CI reports that this is not as reliable as it first appears, with
failures starting to sporadically occur in selftests.
Fixes: 0b702dca2658 ("drm/i915: Avoid waking the engines just to check if they are idle")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190227204654.14907-1-chris@chris-wilson.co.uk
|
|
Do a pass over all the engines upon starting to determine the global
scheduler capability flags (those that are agreed upon by all).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190226102404.29153-7-chris@chris-wilson.co.uk
|
|
Exploit that reads of the ring registers return 0 from the engine when
it is idle and we do not apply forcewake to know that if the engine is
idle then both reads will be identical (and so we interpret the ring as
idle).
The ulterior motive is to try and reduce the number of spurious wakeups
to avoid untimely death, such as:
<3> [85.046836] [drm:fw_domains_get [i915]] *ERROR* render: timed out waiting for forcewake ack request.
<4> [85.051916] ------------[ cut here ]------------
<4> [85.051917] GT thread status wait timed out
<4> [85.051963] WARNING: CPU: 2 PID: 2195 at drivers/gpu/drm/i915/intel_uncore.c:303 __gen6_gt_wait_for_thread_c0+0x6e/0xa0 [i915]
<4> [85.051964] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic i915 x86_pkg_temp_thermal coretemp mei_hdcp crct10dif_pclmul crc32_pclmul snd_hda_intel ghash_clmulni_intel snd_hda_codec broadcom bcm_phy_lib i2c_i801 snd_hwdep snd_hda_core tg3 snd_pcm ptp pps_core mei_me mei prime_numbers lpc_ich
<4> [85.051980] CPU: 2 PID: 2195 Comm: drm_read Tainted: G U 5.0.0-rc8-CI-CI_DRM_5662+ #1
<4> [85.051981] Hardware name: Dell Inc. XPS 8300 /0Y2MRG, BIOS A06 10/17/2011
<4> [85.052012] RIP: 0010:__gen6_gt_wait_for_thread_c0+0x6e/0xa0 [i915]
<4> [85.052015] Code: 8b 92 5c 80 13 00 83 e2 07 75 d5 5b 5d c3 80 3d 5b 6a 1a 00 00 75 f4 48 c7 c7 38 21 31 a0 c6 05 4b 6a 1a 00 01 e8 e2 84 ea e0 <0f> 0b eb dd 80 3d 3a 6a 1a 00 00 75 98 48 c7 c6 08 21 31 a0 48 c7
<4> [85.052016] RSP: 0018:ffffc9000043bd00 EFLAGS: 00010086
<4> [85.052019] RAX: 0000000000000000 RBX: ffff888217c50000 RCX: 0000000000000000
<4> [85.052020] RDX: 0000000000000007 RSI: ffffffff820cb141 RDI: 00000000ffffffff
<4> [85.052022] RBP: 00000013cd30f2fb R08: 0000000000000000 R09: 0000000000000001
<4> [85.052024] R10: ffffc9000043bce0 R11: 0000000000000000 R12: ffff888217c50ee0
<4> [85.052025] R13: 0000000000000001 R14: 00000000ffffffff R15: ffff888218076530
<4> [85.052028] FS: 00007fc79d049980(0000) GS:ffff888227a80000(0000) knlGS:0000000000000000
<4> [85.052029] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [85.052031] CR2: 00007f782e2940f8 CR3: 000000022458e006 CR4: 00000000000606e0
<4> [85.052033] Call Trace:
<4> [85.052064] gen6_read32+0x14e/0x250 [i915]
<4> [85.052096] intel_engine_is_idle+0x7d/0x180 [i915]
<4> [85.052126] intel_engines_are_idle+0x29/0x50 [i915]
<4> [85.052153] i915_drop_caches_set+0x21c/0x290 [i915]
<4> [85.052160] simple_attr_write+0xb0/0xd0
<4> [85.052165] full_proxy_write+0x51/0x80
<4> [85.052170] __vfs_write+0x31/0x190
<4> [85.052176] ? rcu_read_lock_sched_held+0x6f/0x80
<4> [85.052178] ? rcu_sync_lockdep_assert+0x29/0x50
<4> [85.052181] ? __sb_start_write+0x152/0x1f0
<4> [85.052183] ? __sb_start_write+0x163/0x1f0
<4> [85.052187] vfs_write+0xbd/0x1b0
<4> [85.052191] ksys_write+0x50/0xc0
<4> [85.052196] do_syscall_64+0x55/0x190
<4> [85.052200] entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4> [85.052202] RIP: 0033:0x7fc79c9d3281
<4> [85.052204] Code: c3 0f 1f 84 00 00 00 00 00 48 8b 05 59 8d 20 00 c3 0f 1f 84 00 00 00 00 00 8b 05 8a d1 20 00 85 c0 75 16 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 41 54 55 49 89 d4 53
<4> [85.052206] RSP: 002b:00007fffa4a0a7f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
<4> [85.052208] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fc79c9d3281
<4> [85.052210] RDX: 0000000000000005 RSI: 00007fffa4a0a880 RDI: 0000000000000008
<4> [85.052212] RBP: 00007fffa4a0a820 R08: 0000000000000000 R09: 0000000000000000
<4> [85.052213] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc79c9bc718
<4> [85.052215] R13: 0000000000000003 R14: 00007fc79c9c1628 R15: 00007fc79c9bdd80
<4> [85.052223] irq event stamp: 71630
<4> [85.052226] hardirqs last enabled at (71629): [<ffffffff8197b64c>] _raw_spin_unlock_irqrestore+0x4c/0x60
<4> [85.052228] hardirqs last disabled at (71630): [<ffffffff8197b4bd>] _raw_spin_lock_irqsave+0xd/0x50
<4> [85.052231] softirqs last enabled at (70444): [<ffffffff81c0033a>] __do_softirq+0x33a/0x4b9
<4> [85.052234] softirqs last disabled at (70433): [<ffffffff810b51b1>] irq_exit+0xd1/0xe0
<4> [85.052264] WARNING: CPU: 2 PID: 2195 at drivers/gpu/drm/i915/intel_uncore.c:303 __gen6_gt_wait_for_thread_c0+0x6e/0xa0 [i915]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190227114958.32438-1-chris@chris-wilson.co.uk
|
|
When a request has its priority changed, we traverse the graph of all of
its signalers to raise their priorities to match (priority inheritance).
If the request has already started executing its payload, we know that
all of its signalers must have signaled and we do not need to process
our list of signalers.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190226102404.29153-1-chris@chris-wilson.co.uk
|
|
Dump out the infoframes in the normal crtc state dump.
TODO: Try to better integrate the infoframe dumps with
drm state dumps
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225174106.2163-10-ville.syrjala@linux.intel.com
|
|
Check the infoframes and infoframe enable state when comparing two
crtc states.
We'll use the infoframe logging functions from video/hdmi.c to
show the infoframes as part of the state dump.
TODO: Try to better integrate the infoframe dumps with
drm state dumps
v2: drm_printk() is no more
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225174106.2163-9-ville.syrjala@linux.intel.com
|
|
Read the HDMI infoframes from the hbuf and unpack them into
the crtc state.
Well, actually just AVI infoframe for now but let's write the
infoframe readout code in a more generic fashion in case we
expand this later.
Note that Daniel was sceptical about the benefit if this and
also concerned about the potential for crappy sdvo encoders not
implementing the hbuf read commands. My (admittedly limited)
experience is that such encoders don't implement even the
get/set hdmi encoding commands and thus would always be treated
as dvi only. Hence I believe this is safe, and also IMO preferable
having quirks to deal with missing readout support. The readout
support is neatly isolated in the sdvo code whereas the quirk
would leak to other parts of the driver (state checker, fastboot,
etc.) thus complicating the lives of other people.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225174106.2163-8-ville.syrjala@linux.intel.com
|
|
As with regular HDMI encoders, let's precompute the infoframes
(actually just AVI infoframe for the time being) with SDVO HDMI
encoders.
v2: Drop the WARN_ON() from drm_hdmi_avi_infoframe_from_display_mode()
return since that could genuinely fail due to user asking
for incompatible aspect ratio
v3: .compute_config() now returns int
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225174106.2163-7-ville.syrjala@linux.intel.com
|
|
Add code to read the infoframes from the video DIP and unpack them into
the crtc state.
v2: Make the read funcs return void (Daniel)
Drop the duplicate infoframe enabled checks (Daniel)
Add a FIXME for lspcon infoframe readout
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225174106.2163-6-ville.syrjala@linux.intel.com
|
|
Store the infoframes in the crtc state and precompute them in
.compute_config(). While precomputing we'll also fill out the
inforames.enable bitmask appropriately.
v2: Drop the null packet stuff (Daniel)
Add a FIXME for lspcon
v3: .compute_config() now returns int
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225174106.2163-5-ville.syrjala@linux.intel.com
|
|
Store the mask of enabled infoframes in the crtc state. We'll start
with just the readout for HDMI encoder, and we'll expand this
to compute the bitmask in .compute_config() later. SDVO will also
follow later.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225174106.2163-4-ville.syrjala@linux.intel.com
|
|
We want to start tracking which infoframes are enabled, so let's replace
the boolean flag with a bitmask.
We'll abstract the bitmask so that it's not platform dependent. That
will allow us to examine the bitmask later in platform independent code.
v2: Don't map VIDEO_DIP_ENABLE to the null packet (Daniel)
Put a FIXME in the lspcon function
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225174106.2163-3-ville.syrjala@linux.intel.com
|
|
We have definitions and low level code for everything except the gamut
metadata HDMI packet. Add the missing bits.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225174106.2163-2-ville.syrjala@linux.intel.com
|
|
This simplifies adding new query item objects.
v2: Use query_hdr (Tvrtko, Chris).
int instead of u32 in return (Tvrtko)
v3: More naming fixes (Tvrtko)
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190211173251.7131-1-abdiel.janulgue@linux.intel.com
|
|
In selftests/live_hangcheck, we have a lot of tests for resetting simple
spinners, but nothing quite prepared us for how the GPU reacted to
triggering a reset outside of the safe spinner. These two subtests fill
the ring with plain old empty, non-spinning requests, and then triggers
a reset. Without a user-payload to blame, these requests will exercise
the 'non-started' paths and mostly be replayed verbatim.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190226094922.31617-4-chris@chris-wilson.co.uk
|
|
Having weaned the interrupt handling off using a single global execution
queue, we no longer need to emit a global_seqno. Note that we still have
a few assumptions about execution order along engine timelines, but this
removes the most obvious artefact!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190226094922.31617-3-chris@chris-wilson.co.uk
|
|
Stop accessing the HWSP to read the global seqno, and stop tracking the
mirror in the engine's execution timeline -- it is unused.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190226094922.31617-2-chris@chris-wilson.co.uk
|
|
To determine whether an engine has 'stuck', we simply check whether or
not is still on the same seqno for several seconds. To keep this simple
mechanism intact over the loss of a global seqno, we can simply add a
new global heartbeat seqno instead. As we cannot know the sequence in
which requests will then be completed, we use a primitive random number
generator instead (with a cycle long enough to not matter over an
interval of a few thousand requests between hangcheck samples).
The alternative to using a dedicated seqno on every request is to issue
a heartbeat request and query its progress through the system. Sadly
this requires us to reduce struct_mutex so that we can issue requests
without requiring that bkl.
v2: And without the extra CS_STALL for the hangcheck seqno -- we don't
need strict serialisation with what comes later, we just need to be sure
we don't write the hangcheck seqno before our batch is flushed.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190226094922.31617-1-chris@chris-wilson.co.uk
|
|
The commit that this patch fixes changed the order of the parameters
of MG_DP_MODE() but din't update the callers, breaking type-c on ICL.
Fixes: 58106b7d816e ("drm/i915: Make MG PHY macros semantically consistent")
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Aditya Swarup <aditya.swarup@intel.com>
Cc: Manasi navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190222202437.6575-1-jose.souza@intel.com
|
|
As we no longer have a precise indication of requests queued to an
engine, make no presumptions and just sample the ring registers to see
if the engine is busy.
v2: Report busy while the ring is idling on a semaphore/event.
v3: Give the struct a name!
v4: Always 0 outside the powerwell; trusting the powerwell is
accurate enough for our sampling pmu.
v5: Protect against gen7 mmio madness and try to improve grammar
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190223000102.14290-1-chris@chris-wilson.co.uk
|
|
Other than LPT, no other PCH needed to differentiate between
LP and HP. So let's remove this before we spread this mistake
to future platforms.
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190221211716.9433-1-rodrigo.vivi@intel.com
|
|
No functional change. Just a reorg to match the preferred
behavior.
v2: missing else (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190221214430.27095-1-rodrigo.vivi@intel.com
|
|
No functional change. Just a reorg to match the preferred
behavior.
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190221231452.21672-1-rodrigo.vivi@intel.com
|
|
As we disable the log capture events, flush any residual interrupt
before we flush and disable the worker.
v2: Mika pointed out that it wasn't the worker re-queueing itself, but a
rogue irq.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109716
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190221163833.21393-1-chris@chris-wilson.co.uk
|
|
unlikely has already included in IS_ERR(), so just
remove redundant likely/unlikely annotation.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190221020819.21832-1-cgxu519@gmx.com
|
|
Annoyingly, struct_mutex was not entirely eliminated from the reset
pathway; for reasons of its own, intel_display_resume() requires
struct_mutex to prepare the planes it already captured. To avoid the
immediate problem of a deadlock between the struct_mutex and the reset
srcu, we have to acquire the reset_lock before struct_mutex in
i915_gem_fault(). Now any wait underneath struct_mutex will result us in
having to forcibly reset all inflight rendering, less than ideal, but
better than a deadlock (and will do for the short term).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190221102924.13442-1-chris@chris-wilson.co.uk
|
|
gamma mode mask was not considering the 30th and 31st bits.
Due to this state readout was masking these bits, causing a
mismatch and false warning, even though the registers were
updated correctly. Dropped the gamma mode mask as it is
redundant and ideally entire register content should be
matching. This resolves the state mismatch warnings.
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1550689519-6977-1-git-send-email-uma.shankar@intel.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109624
|
|
drivers/gpu/drm/i915/intel_hdcp.c:92 intel_hdcp2_capable() warn: inconsistent indenting
drivers/gpu/drm/i915/intel_hdcp.c:786:5: error: no previous prototype for ‘intel_hdcp_check_link’
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190221084833.19489-1-chris@chris-wilson.co.uk
|
|
This aim of this patch is to call guc_disable_communication in all
suspend paths. The reason to introduce this is to resolve a bug that
occurred due to suspend late not being called in the hibernate devices
path.
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190220013927.9488-3-sujaritha.sundaresan@intel.com
|
|
The aim of this patch is to allow enabling and disabling
of CTB without requiring the mutex lock.
v2: Phasing out ctch_is_enabled function and replacing it with
ctch->enabled (Daniele)
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190220013927.9488-2-sujaritha.sundaresan@intel.com
|
|
Introduce a new ABI method for detecting a wedged driver by reporting
-EIO from DRM_IOCTL_I915_GEM_CONTEXT_CREATE.
This came up in considering how to handle context recovery from
userspace. There we wish to create a new context after the original is
banned (the clients opts into the no recovery after reset strategy) in
order to rebuild the mesa context from scratch. In doing so, if the
device was wedged and not the context banned, we would fall into a loop
of permanently trying to recreate the context and never making forward
progress. This patch would inform the client that we are no longer able
to create a context, and the client would have no choice but to abort
(or at least inform its callers about the lost device for anv).
References: https://lists.freedesktop.org/archives/mesa-dev/2019-February/215469.html
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190220225556.28715-1-chris@chris-wilson.co.uk
|
|
On skl the crc registers were extended to provide plane crcs
for up to 7 planes. Add the new crc sources.
The current code uses the ivb+ register definitions for skl+
which does happen to work as the plane1, plane2, and dmux/pf
bits happen the match what ivb+ had. So no bug in the current
code.
v2: Drop the unused set_wa parameter (DK)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190214192219.3858-4-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
DP CRCs don't really work on g4x. If you want any CRCs on DP you must
select the CRC source before the port is enabled, otherwise the CRC
source select bits simply ignore any writes to them. And once the port
is enabled we mustn't change the CRC source select until the port is
disabled. That almost works, but not quite :( Eventually the CRC source
select bits get permanently stuck one way or the other, and after that
a reboot (or possibly a display reset) is needed to get working CRCs
on that pipe (not matter which CRC source we try to use).
Additionally the DFT scrambler reset bits we're trying to use don't
seem to exist on g4x. There are some potentially relevant looking bits
in the pipe registers, but when I tried it I got stable looking CRCs
without setting any bits for this.
If there is a way to make DP CRCs work reliably on g4x, I wasn't
able to find it. So let's just remove the broken code we have.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190214192219.3858-3-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
|
|
We assume that the index of the string in the crc source names
array matches the enum value for the crc source. Let's use named
initializers to make sure that is indeed the case even if someone
rearranges either the enum or the array.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190214192219.3858-2-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The "pipe" and "pf" crc sources are in fact the same thing.
Remove the "pf" one.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190214192219.3858-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Limit deboosting and boosting to keep ourselves at the extremes
when in the respective power modes (i.e. slowly decrease frequencies
while in the HIGH_POWER zone and slowly increase frequencies while
in the LOW_POWER zone). On idle, we will hit the timeout and drop
to the next level quickly, and conversely if busy we expect to
hit a waitboost and rapidly switch into max power.
This should improve the UX experience by keeping the GPU clocks higher
than they ostensibly should be (based on simple busyness) by switching
into the INTERACTIVE mode (due to waiting for pageflips) and increasing
clocks via waitboosting. This will incur some additional power, our
saving grace should be rc6 and powergating to keep the extra current
draw in check.
Food for future thought would be deadline scheduling? If we know certain
contexts (high priority compositors) absolutely must hit the next vblank
then we can raise the frequencies ahead of time. Part of this is covered
by per-context frequencies, where userspace is given control over the
frequency range they want the GPU to execute at (for largely the same
problem as this, where the workload is very latency sensitive but at the
EI level appears mostly idle). Indeed, the per-context series does
extend the modeset boosting to include a frequency range tweak which
seems applicable to solving this jittery UX behaviour.
Reported-by: Lyude Paul <lyude@redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109408
References: 0d55babc8392 ("drm/i915: Drop stray clearing of rps->last_adj")
References: 60548c554be2 ("drm/i915: Interactive RPS mode")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Quoting Lyude Paul:
> Before reverting 0d55babc8392754352f1058866dd4182ae587d11: [4.20]
>
> 35 measurements [of gnome-shell animations]
> Average: 33.65657142857143 FPS
> FPS observed: 20.8 - 46.87 FPS
> Percentage under 60 FPS: 100.0%
> Percentage under 55 FPS: 100.0%
> Percentage under 50 FPS: 100.0%
> Percentage under 45 FPS: 97.14285714285714%
> Percentage under 40 FPS: 97.14285714285714%
> Percentage under 35 FPS: 45.714285714285715%
> Percentage under 30 FPS: 11.428571428571429%
> Percentage under 25 FPS: 2.857142857142857%
>
> After reverting: [4.19 behaviour]
>
> 30 measurements
> Average: 49.833666666666666 FPS
> FPS observed: 33.85 - 60.0 FPS
> Percentage under 60 FPS: 86.66666666666667%
> Percentage under 55 FPS: 70.0%
> Percentage under 50 FPS: 53.333333333333336%
> Percentage under 45 FPS: 20.0%
> Percentage under 40 FPS: 6.666666666666667%
> Percentage under 35 FPS: 6.666666666666667%
> Percentage under 30 FPS: 0%
> Percentage under 25 FPS: 0%
>
> Patched:
> 42 measurements
> Average: 46.05428571428571 FPS
> FPS observed: 1.82 - 59.98 FPS
> Percentage under 60 FPS: 88.09523809523809%
> Percentage under 55 FPS: 61.904761904761905%
> Percentage under 50 FPS: 45.23809523809524%
> Percentage under 45 FPS: 35.714285714285715%
> Percentage under 40 FPS: 33.33333333333333%
> Percentage under 35 FPS: 19.047619047619047%
> Percentage under 30 FPS: 7.142857142857142%
> Percentage under 25 FPS: 4.761904761904762%
Tested-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190219122215.8941-13-chris@chris-wilson.co.uk
|
|
HDCP transmitter is supposed to indicate the HDCP encryption status of
the link through enc_en signals in a window of time called "window of
opportunity" defined by HDCP HDMI spec.
But on KBL this timing of signalling has an issue. To fix the issue this
WA of resetting the signalling is required.
v2:
WA is moved into the toggle_signalling [Daniel]
v3:
Commit msg is rewritten with more information
v4:
Reviewed-by Daniel.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-17-git-send-email-ramalingam.c@intel.com
|
|
Implements the
Waitqueue is created to wait for CP_IRQ
Signaling the CP_IRQ arrival through atomic variable.
For applicable DP HDCP2.2 msgs read wait for CP_IRQ.
As per HDCP2.2 spec "HDCP Transmitters must process CP_IRQ interrupts
when they are received from HDCP Receivers"
Without CP_IRQ processing, DP HDCP2.2 H_Prime msg was getting corrupted
while reading it based on corresponding status bit. This creates the
random failures in reading the DP HDCP2.2 msgs.
v2:
CP_IRQ arrival is tracked based on the atomic val inc [daniel]
Recording the reviewed-by Daniel from IRC.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-16-git-send-email-ramalingam.c@intel.com
|
|
Implements the HDMI adaptation specific HDCP2.2 operations.
Basically these are DDC read and write for authenticating through
HDCP2.2 messages.
v2: Rebased.
v3:
No more special handling of Gmbus burst read for AKE_SEND_CERT.
Style fixed with few naming. [Uma]
%s/PARING/PAIRING
v4:
msg_sz is initialized at definition.
Lookup table is defined for HDMI HDCP2.2 msgs [Daniel].
v5: Rebased.
v6:
Make a function as inline [Uma]
%s/uintxx_t/uxx
v7:
Errors due to sinks are reported as DEBUG logs.
Adjust to the new mei interface.
v8:
ARRAY_SIZE for the # of array members [Jon & Daniel].
hdcp adaptation is added as a const in the hdcp_shim [Daniel]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-15-git-send-email-ramalingam.c@intel.com
|
