summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-02-26Merge branch 'omap-for-v4.6/dt-gpmc' into omap-for-v4.6/dtTony Lindgren33-56/+142
2016-02-26ARM: dts: omap3: Fix NAND device nodesRoger Quadros17-17/+75
Add compatible id, GPMC register resource and interrupt resource to NAND controller nodes. The GPMC node will provide an interrupt controller for the NAND IRQs. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-26ARM: dts: dm8168-evm: ARM: dts: Disable wait pin monitoring for NANDRoger Quadros1-3/+0
The NAND Ready/Busy# line is connected to GPMC_WAIT0 pin and can't be used for wait state insertion for NAND I/O read/write. So disable read/write wait monitoring as per Reference Manual's suggestion [1]. [1] dm816x TRM: SPRUGX8C: 9.2.4.12.2 NAND Device-Ready Pin Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-26ARM: dts: dm816x: Fix NAND device nodesRoger Quadros2-0/+7
Add compatible id, GPMC register resource and interrupt resource to NAND controller nodes. The GPMC node will provide an interrupt controller for the NAND IRQs. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-26ARM: dts: am335x: Disable wait pin monitoring for NANDRoger Quadros6-18/+0
The NAND Ready/Busy# line is connected to GPMC_WAIT0 pin and can't be used for wait state insertion for NAND I/O read/write. So disable read/write wait monitoring as per Reference Manual's suggestion [1]. [1] AM335x TRM: SPRUH73L: 7.1.3.3.12.2 NAND Device-Ready Pin Cc: Teresa Remmet <t.remmet@phytec.de> Cc: Ilya Ledvich <ilya@compulab.co.il> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Rostislav Lisovy <lisovy@gmail.com> Cc: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-26ARM: dts: am335x: Fix NAND device nodesRoger Quadros7-2/+32
Add compatible id, GPMC register resource and interrupt resource to NAND controller nodes. The GPMC node will provide an interrupt controller for the NAND IRQs. Cc: Teresa Remmet <t.remmet@phytec.de> Cc: Ilya Ledvich <ilya@compulab.co.il> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Rostislav Lisovy <lisovy@gmail.com> Cc: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-26ARM: dts: am437x: Disable wait pin monitoring for NANDRoger Quadros3-9/+0
The NAND Ready/Busy# line is connected to GPMC_WAIT0 pin and can't be used for wait state insertion for NAND I/O read/write. So disable read/write wait monitoring as per Reference Manual's suggestion [1]. [1] AM437x TRM: SPRUHL7D: 9.1.3.3.12.2 NAND Device-Ready Pin Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-26ARM: dts: am437x: Fix NAND device nodesRoger Quadros4-3/+17
Add compatible id, GPMC register resource and interrupt resource to NAND controller nodes. The GPMC node will provide an interrupt controller for the NAND IRQs. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-26ARM: dts: dra7: Remove redundant nand propertyRoger Quadros2-2/+0
wait pin monitoring is not used for nand so it is pointless to have the gpmc,wait-monitoring-ns property. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-26ARM: dts: dra7: Fix NAND device nodesRoger Quadros3-2/+12
Add compatible id, GPMC register resource and interrupt resource to NAND controller nodes. The GPMC node will provide an interrupt controller for the NAND IRQs. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-22ARM: dts: am57xx-beagle-x15: Add eeprom informationNishanth Menon1-0/+5
Add EEPROM at 0x50 that describes the board configuration. This is useful for userspace programs that may need to check board revision and other similar information. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-22ARM: dts: Add HSUSB2 EHCI Support to Logic PD DM37xx SOM-LVAdam Ford1-0/+57
The Logic PD SOM-LV has a USB Host Controller connected to 3-port hub. This enables the pin muxing for the host controller and ehci-phy. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-22Merge branch 'n900-keys' into omap-for-v4.6/dtTony Lindgren1-14/+9
2016-02-22ARM: dts: n900: Use linux input defines instead hardcoded constantsPali Rohár1-9/+9
This makes DTS structure more readable. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Acked-By: Sebastian Reichel <sre@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-22ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LVAdam Ford2-0/+476
The Logic PD DM37xx SOM-LV devkit consists of a base board and a SOM. While the SOM (System on Module) supports Bluetooth and WiFi, LPD did not obtain an FCC ID, so anyone who uses it will have to go through certification. I have only tested the Type 28 Display, SMSC9211 Ethernet, SD/MMC and basic power management, however the overall current seems high. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-22ARM: dts: omap3logic: Add PWM-BacklightAdam Ford1-6/+20
The backlight pin is shared with Timer 10 PWM. This patch allows the pwm_bl driver to enable the pwm run by this timer to dim the backlight. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-22ARM: dts: omap3-n900: Allow gpio keys to be disabledIvaylo Dimitrov1-0/+6
Add linux,can-disable; to all gpios exported from gpio-keys driver, so userspace can disable them Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-19ARM: dts: am43x-epos-evm: Add the am438 compatible stringKeerthy2-2/+2
The SoCs on am43x-epos-evm are named am438x. Hence add the compatibility string and remove the am4372 string. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-13ARM: dts: DRA7: Add missing IVA and DSPEVE thermal domain dataKeerthy1-0/+2
OMAP5 has 3 thermal zones cpu, core and multimedia. On the other hand DRA7 has 5 thermal zones cpu, gpu, core, dspeve and iva. Currently cpu, core and multimedia are being added via device tree and the other 2 are getting added via kernel. Add the missing thermal domains in device tree so we can create the zones with the appropriate trip numbers, type and temperatures. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-13ARM: dts: DRA7: Add IVA thermal dataKeerthy1-0/+27
This patch changes a dtsi file to contain the thermal data for IVA domain. This data will enable a thermal shutdown at 125C. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-13ARM: dts: DRA7: Add DSPEVE thermal dataKeerthy1-0/+27
This patch changes a dtsi file to contain the thermal data for DSPEVE domain. This data will enable a thermal shutdown at 125C. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-13ARM: dts: remove deprecated property dwc3Felipe Balbi3-5/+0
DWC3's tx-fifo-resize property has been deprecated because of it being unnecessary to any HW other than OMAP5 ES1.0. Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-13ARM: dts: OMAP3-N950-N9: Add ssi idle pinctrl stateSebastian Reichel1-1/+15
This adds an idle pinctrl state, which will be used by the driver to avoid incoming data during clock rate changes or data flushing. Signed-off-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-13ARM: dts: am335x-sl50: Fix audio codec setup.Enric Balletbo i Serra1-2/+18
The MCLK is provided by an external clock of 24.576MHz. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-13ARM: dts: am335x-sl50: Specify the device to be used for boot console output.Enric Balletbo i Serra1-0/+4
UART0 device is the device to be used for boot console output. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-13ARM: dts: omap3-igep0030-common: Add USB Host supportPau Pajuel1-0/+41
Provide RESET GPIO for the USB PHY, the USB Host port mode and the PHY device for the controller. Also provides pin multiplexer information for USB host pins. Signed-off-by: Pau Pajuel <ppajuel@gmail.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-13ARM: dts: igep00x0: Specify the device to be used for boot console output.Enric Balletbo i Serra1-0/+4
UART3 device is the device to be used for boot console output. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-13ARM: dts: LogicPD Torpedo: Set HSUSB0 Pin MuxAdam Ford2-1/+19
This patch defines the pin muxing to configure the hsusb0 through the twl4030 PMIC, because we can't always assume the bootloader will do it correctly. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-13ARM: dts: OMAP3-N950-N9: Enable modemSebastian Reichel3-0/+48
The Nokia N950 and Nokia N9 have a modem attached to their first ssi port. This change adds the modem to the SSI port. Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-13ARM: dts: OMAP3-N950-N9: Enable SSI moduleSebastian Reichel1-0/+24
The Nokia N950 and Nokia N9 have a modem attached to their first ssi port. This change adds all necessary information to initialize the SSI module, but does not yet add the modem information. Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-13ARM: dts: LogicPD Torpedo: Add SPI EEPROMAdam Ford2-0/+28
The devkit has an AT25 EEPROM on MCSPI1. Enable this with default parameters. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-13ARM: dts: LogicPD Torpedo: Fix Panel SleepAdam Ford1-29/+45
Setup regulator and fix pin muxing to allow Panel to sleep and wake from sleep for some low power improvements. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-13ARM: dts: LogicPD Torpedo: Add AT24 EEPROM SupportAdam Ford1-0/+5
The Wireless version of the SOM uses an AT24 EEPROM to store product ID. The EEPROM is readonly. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-13ARM: dts: LogicPD Torpedo: Add MT9P031 SupportAdam Ford1-0/+53
The Logic PD Torpedo standard kits come with a SOM populated to us an 8-bit parallel camera interface. This patch pin muxes the omap3-isp pins, sets the MT9P031 clicks, and configures the i2c2 bus to communicate with the mt9p031 on address 0x48. I have not done a lot of testing, but when modprobing mt9p031, then omap3-isp, the board responds with MT9P031 detected at address 0x48. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-13ARM: dts: am4372/dra7/omap5: Use "syscon-phy-power" instead of "ctrl-module"Kishon Vijay Abraham I3-67/+9
Add "syscon-phy-power" property and remove the deprecated "ctrl-module" property from SATA and USB PHY node. Also remove the unused control module dt nodes. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-13ARM: dts: dra7: Use "ti,dra7x-usb2-phy2" compatible string for USB2 PHY2Kishon Vijay Abraham I1-1/+2
The USB2 PHY2 has a different register map compared to USB2 PHY1 to power on/off the PHY. In order to handle it, use the new compatible string "ti,dra7x-usb2-phy2" for the second instance of USB2 PHY. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-13ARM: dts: dra7: Use "syscon-phy-power" and "syscon-pcs" in PCIe PHY nodeKishon Vijay Abraham I1-23/+10
Add "syscon-phy-power" property and "syscon-pcs" property which can be used to perform the control module initializations and remove the deprecated "ctrl-module" property from PCIe PHY dt nodes. Phandle to "sysclk" clock node is also added to the PCIe PHY node since some of the syscon initializations is based on system clock frequency. Since "omap_control_pcie1phy" and "omap_control_pcie2phy" devicetree nodes are no longer used, remove it. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-13ARM: dts: dra7: Add dt node for the sycon pcieKishon Vijay Abraham I1-0/+5
Add new device tree node for the control module register space where PCIe registers are present. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-13ARM: dts: Add NAND support for dm8148-evmTony Lindgren1-0/+56
Add NAND support for dm8148-evm. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-13ARM: dts: Add NAND support for j5-eco evmTony Lindgren1-0/+56
Add NAND support for j5-eco evm. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-13ARM: dts: Add support for GPMC for dm814x and dra62xTony Lindgren1-0/+12
Add support for GPMC for dm814x and dra62x Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-13ARM: dts: The rate for auxclk is 22.59792 by defaultTony Lindgren1-2/+2
The rate for auxclk is 22.59792 by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27ARM: dts: N950: Add wlan supportSebastian Reichel2-0/+44
Add support for the wl1271 wlan chip. As far as I can see N9 uses the same chip with the same enable and irq gpio, but they use the mmc interface instead of the spi interface. Signed-off-by: Sebastian Reichel <sre@kernel.org> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27ARM: dts: add spi wifi support to cm-t335Uri Mashiach1-0/+55
Device tree modifications: - Pinmux for SPI0 and WiFi GPIOs. - SPI0 node with wlcore as a child node. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27ARM: dts: cm-t335: add audio supportUri Mashiach1-0/+69
The TLV320AIC23B codec is connected to the CPU by McASP controller 1 for data and I2C0 for control. Modifications: - Enable and configure McASP controller 1. - Add TLV320AIC23B codec pinmux. - Add TLV320AIC23B codec configurations. - Use simple-audio-card as CPU to codec glue. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27ARM: dts: cm-t335: add touchscreen supportUri Mashiach1-0/+17
Touchscreen and analog digital converter configurations. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27ARM: dts: cm-t335: Add support for CAN busUri Mashiach1-0/+30
Add CAN bus pinmux. Enable D_CAN bus controllers 0 and 1 The pinmux of uart1 node contradicts the pinmux of dcan0 and dcan1 nodes. U-Boot should delete the uart1 or dcan0/1 nodes. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27ARM: dts: omap3: Include missing bandgap data for ti-soc-thermal driverPali Rohár2-0/+12
Driver for omap3 with documentation is there since v4.4-rc1. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Tested-by: Pavel Machek <pavel@ucw.cz> [tony@atomide.com: added thermal-sensor-cells as suggested by Roger] Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27ARM: dts: n900: Include adp1653 devicePali Rohár1-0/+15
This patch adds adp1653 device into n900 DT structure. DT support in adp1653 driver is there since v4.2-rc1 version. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-25Linux 4.5-rc1v4.5-rc1Linus Torvalds1-2/+2
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 07:32:36 +0300