summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-07-21vgaarb: cleanup vgaarb.hChristoph Hellwig1-48/+42
Merge the different CONFIG_VGA_ARB ifdef blocks, remove superflous externs, and regularize the stubs for !CONFIG_VGA_ARB. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210716061634.2446357-5-hch@lst.de Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2021-07-21vgaarb: move the kerneldoc for vga_set_legacy_decoding to vgaarb.cChristoph Hellwig2-13/+11
Kerneldoc comments should be at the implementation side, not in the header just declaring the prototype. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210716061634.2446357-4-hch@lst.de Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2021-07-21vgaarb: remove vga_conflictsChristoph Hellwig2-18/+0
vga_conflicts only has a single caller and none of the arch overrides mentioned in the comment. Just remove it and the thus dead check in the caller. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210716061634.2446357-3-hch@lst.de Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2021-07-21vgaarb: remove VGA_DEFAULT_DEVICEChristoph Hellwig1-6/+0
The define is entirely unused. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210716061634.2446357-2-hch@lst.de Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2021-07-21usb: cdc-wdm: fix build error when CONFIG_WWAN_CORE is not setWei Yongjun1-3/+3
Gcc report build error as following when CONFIG_WWAN_CORE is not set: x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_disconnect': cdc-wdm.c:(.text+0xb2a): undefined reference to `wwan_remove_port' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_in_callback': cdc-wdm.c:(.text+0xf23): undefined reference to `wwan_port_rx' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_stop': cdc-wdm.c:(.text+0x127d): undefined reference to `wwan_port_get_drvdata' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_tx': cdc-wdm.c:(.text+0x12d9): undefined reference to `wwan_port_get_drvdata' x86_64-linux-gnu-ld: cdc-wdm.c:(.text+0x13c1): undefined reference to `wwan_port_txoff' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_start': cdc-wdm.c:(.text+0x13e0): undefined reference to `wwan_port_get_drvdata' x86_64-linux-gnu-ld: cdc-wdm.c:(.text+0x1431): undefined reference to `wwan_port_txon' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_tx_complete': cdc-wdm.c:(.text+0x14a4): undefined reference to `wwan_port_txon' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_create.cold': cdc-wdm.c:(.text.unlikely+0x209): undefined reference to `wwan_create_port' Using CONFIG_WWAN_CORE instead of CONFIG_WWAN to avoid build error. Fixes: cac6fb015f71 ("usb: class: cdc-wdm: WWAN framework integration") Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20210521021010.2490930-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21nvme: fix nvme_setup_command metadata trace eventKeith Busch1-3/+3
The metadata address is set after the trace event, so the trace is not capturing anything useful. Rather than logging the memory address, it's useful to know if the command carries a metadata payload, so change the trace event to log that true/false state instead. Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-07-21nvme: fix refcounting imbalance when all paths are downHannes Reinecke3-13/+21
When the last path to a ns_head drops the current code removes the ns_head from the subsystem list, but will only delete the disk itself if the last reference to the ns_head drops. This is causing an refcounting imbalance eg when applications have a reference to the disk, as then they'll never get notified that the disk is in fact dead. This patch moves the call 'del_gendisk' into nvme_mpath_check_last_path(), ensuring that the disk can be properly removed and applications get the appropriate notifications. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-07-21nvme-pci: don't WARN_ON in nvme_reset_work if ctrl.state is not RESETTINGZhihao Cheng1-1/+3
Followling process: nvme_probe nvme_reset_ctrl nvme_change_ctrl_state(ctrl, NVME_CTRL_RESETTING) queue_work(nvme_reset_wq, &ctrl->reset_work) --------------> nvme_remove nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_DELETING) worker_thread process_one_work nvme_reset_work WARN_ON(dev->ctrl.state != NVME_CTRL_RESETTING) , which will trigger WARN_ON in nvme_reset_work(): [ 127.534298] WARNING: CPU: 0 PID: 139 at drivers/nvme/host/pci.c:2594 [ 127.536161] CPU: 0 PID: 139 Comm: kworker/u8:7 Not tainted 5.13.0 [ 127.552518] Call Trace: [ 127.552840] ? kvm_sched_clock_read+0x25/0x40 [ 127.553936] ? native_send_call_func_single_ipi+0x1c/0x30 [ 127.555117] ? send_call_function_single_ipi+0x9b/0x130 [ 127.556263] ? __smp_call_single_queue+0x48/0x60 [ 127.557278] ? ttwu_queue_wakelist+0xfa/0x1c0 [ 127.558231] ? try_to_wake_up+0x265/0x9d0 [ 127.559120] ? ext4_end_io_rsv_work+0x160/0x290 [ 127.560118] process_one_work+0x28c/0x640 [ 127.561002] worker_thread+0x39a/0x700 [ 127.561833] ? rescuer_thread+0x580/0x580 [ 127.562714] kthread+0x18c/0x1e0 [ 127.563444] ? set_kthread_struct+0x70/0x70 [ 127.564347] ret_from_fork+0x1f/0x30 The preceding problem can be easily reproduced by executing following script (based on blktests suite): test() { pdev="$(_get_pci_dev_from_blkdev)" sysfs="/sys/bus/pci/devices/${pdev}" for ((i = 0; i < 10; i++)); do echo 1 > "$sysfs/remove" echo 1 > /sys/bus/pci/rescan done } Since the device ctrl could be updated as an non-RESETTING state by repeating probe/remove in userspace (which is a normal situation), we can replace stack dumping WARN_ON with a warnning message. Fixes: 82b057caefaff ("nvme-pci: fix multiple ctrl removal schedulin") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
2021-07-21Revert "arm64: dts: qcom: Harmonize DWC USB3 DT nodes name"Greg Kroah-Hartman9-14/+14
This reverts commit eb9b7bfd5954f5f6ac4d57313541dd0294660aad as it breaks working userspace implementations (i.e. Android systems) The device node name here is part of configfs, so it is a user-visable api that can not be changed. Reported-by: John Stultz <john.stultz@linaro.org> Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/CALAqxLX_FNvFndEDWtGbFPjSzuAbfqxQE07diBJFZtftwEJX5A@mail.gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: dwc2: gadget: Fix sending zero length packet in DDMA mode.Minas Harutyunyan1-4/+6
Sending zero length packet in DDMA mode perform by DMA descriptor by setting SP (short packet) flag. For DDMA in function dwc2_hsotg_complete_in() does not need to send zlp. Tested by USBCV MSC tests. Fixes: f71b5e2533de ("usb: dwc2: gadget: fix zero length packet transfers") Cc: stable <stable@vger.kernel.org> Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/967bad78c55dd2db1c19714eee3d0a17cf99d74a.1626777738.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: dwc2: Skip clock gating on Samsung SoCsMarek Szyprowski4-3/+11
Commit 0112b7ce68ea ("usb: dwc2: Update dwc2_handle_usb_suspend_intr function.") changed the way the driver handles power down modes in a such way that it uses clock gating when no other power down mode is available. This however doesn't work well on the DWC2 implementation used on the Samsung SoCs. When a clock gating is enabled, system hangs. It looks that the proper clock gating requires some additional glue code in the shared USB2 PHY and/or Samsung glue code for the DWC2. To restore driver operation on the Samsung SoCs simply skip enabling clock gating mode until one finds what is really needed to make it working reliably. Fixes: 0112b7ce68ea ("usb: dwc2: Update dwc2_handle_usb_suspend_intr function.") Cc: stable <stable@vger.kernel.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20210716050127.4406-1-m.szyprowski@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop()Yoshihiro Shimoda1-0/+7
This driver has a potential issue which this driver is possible to cause superfluous irqs after usb_pkt_pop() is called. So, after the commit 3af32605289e ("usb: renesas_usbhs: fix error return code of usbhsf_pkt_handler()") had been applied, we could observe the following error happened when we used g_audio. renesas_usbhs e6590000.usb: irq_ready run_error 1 : -22 To fix the issue, disable the tx or rx interrupt in usb_pkt_pop(). Fixes: 2743e7f90dc0 ("usb: renesas_usbhs: fix the usb_pkt_pop()") Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20210624122039.596528-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: dwc2: gadget: Fix GOUTNAK flow for Slave mode.Minas Harutyunyan1-0/+21
Because of dwc2_hsotg_ep_stop_xfr() function uses poll mode, first need to mask GINTSTS_GOUTNAKEFF interrupt. In Slave mode GINTSTS_GOUTNAKEFF interrupt will be aserted only after pop OUT NAK status packet from RxFIFO. In dwc2_hsotg_ep_sethalt() function before setting DCTL_SGOUTNAK need to unmask GOUTNAKEFF interrupt. Tested by USBCV CH9 and MSC tests set in Slave, BDMA and DDMA. All tests are passed. Fixes: a4f827714539a ("usb: dwc2: gadget: Disable enabled HW endpoint in dwc2_hsotg_ep_disable") Fixes: 6070636c4918c ("usb: dwc2: Fix Stalling a Non-Isochronous OUT EP") Cc: stable <stable@vger.kernel.org> Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/e17fad802bbcaf879e1ed6745030993abb93baf8.1626152924.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: phy: Fix page fault from usb_phy_ueventArtur Petrosyan1-2/+8
When the dwc2 platform device is removed, it unregisters the generic phy. usb_remove_phy() is called and the dwc2 usb_phy is removed from the "phy_list", but the uevent may still attempt to get the usb_phy from the list, resulting in a page fault bug. Currently we can't access the usb_phy from the "phy_list" after the device is removed. As a fix check to make sure that we can get the usb_phy before moving forward with the uevent. [ 84.949345] BUG: unable to handle page fault for address:00000007935688d8 [ 84.949349] #PF: supervisor read access in kernel mode [ 84.949351] #PF: error_code(0x0000) - not-present page [ 84.949353] PGD 0 P4D 0 [ 84.949356] Oops: 0000 [#1] SMP PTI [ 84.949360] CPU: 2 PID: 2081 Comm: rmmod Not tainted 5.13.0-rc4-snps-16547-ga8534cb092d7-dirty #32 [ 84.949363] Hardware name: Hewlett-Packard HP Z400 Workstation/0B4Ch, BIOS 786G3 v03.54 11/02/2011 [ 84.949365] RIP: 0010:usb_phy_uevent+0x99/0x121 [ 84.949372] Code: 8d 83 f8 00 00 00 48 3d b0 12 22 94 74 05 4c 3b 23 75 5b 8b 83 9c 00 00 00 be 32 00 00 00 48 8d 7c 24 04 48 c7 c2 d4 5d 7b 93 <48> 8b 0c c5 e0 88 56 93 e8 0f 63 8a ff 8b 83 98 00 00 00 be 32 00 [ 84.949375] RSP: 0018:ffffa46bc0f2fc70 EFLAGS: 00010246 [ 84.949378] RAX: 00000000ffffffff RBX: ffffffff942211b8 RCX: 0000000000000027 [ 84.949380] RDX: ffffffff937b5dd4 RSI: 0000000000000032 RDI: ffffa46bc0f2fc74 [ 84.949383] RBP: ffff94a306613000 R08: 0000000000000000 R09: 00000000fffeffff [ 84.949385] R10: ffffa46bc0f2faa8 R11: ffffa46bc0f2faa0 R12: ffff94a30186d410 [ 84.949387] R13: ffff94a32d188a80 R14: ffff94a30029f960 R15: ffffffff93522dd0 [ 84.949389] FS: 00007efdbd417540(0000) GS:ffff94a513a80000(0000) knlGS:0000000000000000 [ 84.949392] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 84.949394] CR2: 00000007935688d8 CR3: 0000000165606000 CR4: 00000000000006e0 [ 84.949396] Call Trace: [ 84.949401] dev_uevent+0x190/0x1ad [ 84.949408] kobject_uevent_env+0x18e/0x46c [ 84.949414] device_release_driver_internal+0x17f/0x18e [ 84.949418] bus_remove_device+0xd3/0xe5 [ 84.949421] device_del+0x1c3/0x31d [ 84.949425] ? kobject_put+0x97/0xa8 [ 84.949428] platform_device_del+0x1c/0x63 [ 84.949432] platform_device_unregister+0xa/0x11 [ 84.949436] dwc2_pci_remove+0x1e/0x2c [dwc2_pci] [ 84.949440] pci_device_remove+0x31/0x81 [ 84.949445] device_release_driver_internal+0xea/0x18e [ 84.949448] driver_detach+0x68/0x72 [ 84.949450] bus_remove_driver+0x63/0x82 [ 84.949453] pci_unregister_driver+0x1a/0x75 [ 84.949457] __do_sys_delete_module+0x149/0x1e9 [ 84.949462] ? task_work_run+0x64/0x6e [ 84.949465] ? exit_to_user_mode_prepare+0xd4/0x10d [ 84.949471] do_syscall_64+0x5d/0x70 [ 84.949475] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 84.949480] RIP: 0033:0x7efdbd563bcb [ 84.949482] Code: 73 01 c3 48 8b 0d c5 82 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 95 82 0c 00 f7 d8 64 89 01 48 [ 84.949485] RSP: 002b:00007ffe944d7d98 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 84.949489] RAX: ffffffffffffffda RBX: 00005651072eb700 RCX: 00007efdbd563bcb [ 84.949491] RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005651072eb768 [ 84.949493] RBP: 00007ffe944d7df8 R08: 0000000000000000 R09: 0000000000000000 [ 84.949495] R10: 00007efdbd5dfac0 R11: 0000000000000206 R12: 00007ffe944d7fd0 [ 84.949497] R13: 00007ffe944d8610 R14: 00005651072eb2a0 R15: 00005651072eb700 [ 84.949500] Modules linked in: uas configfs dwc2_pci(-) phy_generic fuse crc32c_intel [last unloaded: udc_core] [ 84.949508] CR2: 00000007935688d8 [ 84.949510] ---[ end trace e40c871ca3e4dc9e ]--- [ 84.949512] RIP: 0010:usb_phy_uevent+0x99/0x121 Fixes: a8534cb092d7 ("usb: phy: introduce usb_phy device type with its own uevent handler") Reviewed-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20210710092247.D7AFEA005D@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: xhci: avoid renesas_usb_fw.mem when it's unusableGreg Thelen1-0/+7
Commit a66d21d7dba8 ("usb: xhci: Add support for Renesas controller with memory") added renesas_usb_fw.mem firmware reference to xhci-pci. Thus modinfo indicates xhci-pci.ko has "firmware: renesas_usb_fw.mem". But the firmware is only actually used with CONFIG_USB_XHCI_PCI_RENESAS. An unusable firmware reference can trigger safety checkers which look for drivers with unmet firmware dependencies. Avoid referring to renesas_usb_fw.mem in circumstances when it cannot be loaded (when CONFIG_USB_XHCI_PCI_RENESAS isn't set). Fixes: a66d21d7dba8 ("usb: xhci: Add support for Renesas controller with memory") Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Thelen <gthelen@google.com> Link: https://lore.kernel.org/r/20210702071224.3673568-1-gthelen@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: gadget: u_serial: remove WARN_ON on null portColin Ian King1-1/+1
Loading and then unloading module g_dpgp on a VM that does not support the driver currently throws a WARN_ON message because the port has not been initialized. Removing an unused driver is a valid use-case and the WARN_ON kernel warning is a bit excessive, so remove it. Cleans up: [27654.638698] ------------[ cut here ]------------ [27654.638705] WARNING: CPU: 6 PID: 2956336 at drivers/usb/gadget/function/u_serial.c:1201 gserial_free_line+0x7c/0x90 [u_serial] [27654.638728] Modules linked in: g_dbgp(-) u_serial usb_f_tcm target_core_mod libcomposite udc_core vmw_vmci mcb i2c_nforce2 i2c_amd756 nfit cx8800 videobuf2_dma_sg videobuf2_memops videobuf2_v4l2 cx88xx tveeprom videobuf2_common videodev mc ccp hid_generic hid intel_ishtp cros_ec mc13xxx_core vfio_mdev mdev i915 i2c_algo_bit kvm ppdev parport zatm eni suni uPD98402 atm rio_scan binder_linux hwmon_vid video ipmi_devintf ipmi_msghandler zstd nls_utf8 decnet qrtr ns sctp ip6_udp_tunnel udp_tunnel fcrypt pcbc nhc_udp nhc_ipv6 nhc_routing nhc_mobility nhc_hop nhc_dest nhc_fragment 6lowpan ts_kmp dccp_ipv6 dccp_ipv4 dccp snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq_dummy snd_seq snd_seq_device xen_front_pgdir_shbuf binfmt_misc nls_iso8859_1 dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua intel_rapl_msr intel_rapl_common snd_hda_codec_generic ledtrig_audio snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd rapl soundcore joydev input_leds mac_hid serio_raw efi_pstore [27654.638880] qemu_fw_cfg sch_fq_codel msr virtio_rng autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear qxl drm_ttm_helper crct10dif_pclmul ttm drm_kms_helper syscopyarea sysfillrect sysimgblt virtio_net fb_sys_fops cec net_failover rc_core ahci psmouse drm libahci lpc_ich virtio_blk failover [last unloaded: u_ether] [27654.638949] CPU: 6 PID: 2956336 Comm: modprobe Tainted: P O 5.13.0-9-generic #9 [27654.638956] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [27654.638969] RIP: 0010:gserial_free_line+0x7c/0x90 [u_serial] [27654.638981] Code: 20 00 00 00 00 e8 74 1a ba c9 4c 89 e7 e8 8c fe ff ff 48 8b 3d 75 3b 00 00 44 89 f6 e8 3d 7c 69 c9 5b 41 5c 41 5d 41 5e 5d c3 <0f> 0b 4c 89 ef e8 4a 1a ba c9 5b 41 5c 41 5d 41 5e 5d c3 90 0f 1f [27654.638986] RSP: 0018:ffffba0b81403da0 EFLAGS: 00010246 [27654.638992] RAX: 0000000000000000 RBX: ffffffffc0eaf6a0 RCX: 0000000000000000 [27654.638996] RDX: ffff8e21c0cac8c0 RSI: 0000000000000006 RDI: ffffffffc0eaf6a0 [27654.639000] RBP: ffffba0b81403dc0 R08: ffffba0b81403de0 R09: fefefefefefefeff [27654.639003] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [27654.639006] R13: ffffffffc0eaf6a0 R14: 0000000000000000 R15: 0000000000000000 [27654.639010] FS: 00007faa1935e740(0000) GS:ffff8e223bd80000(0000) knlGS:0000000000000000 [27654.639015] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [27654.639019] CR2: 00007ffc840cd4e8 CR3: 000000000e1ac006 CR4: 0000000000370ee0 [27654.639028] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [27654.639031] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [27654.639035] Call Trace: [27654.639044] dbgp_exit+0x1c/0xa1a [g_dbgp] [27654.639054] __do_sys_delete_module.constprop.0+0x144/0x260 [27654.639066] ? call_rcu+0xe/0x10 [27654.639073] __x64_sys_delete_module+0x12/0x20 [27654.639081] do_syscall_64+0x61/0xb0 [27654.639092] ? exit_to_user_mode_loop+0xec/0x160 [27654.639098] ? exit_to_user_mode_prepare+0x37/0xb0 [27654.639104] ? syscall_exit_to_user_mode+0x27/0x50 [27654.639110] ? __x64_sys_close+0x12/0x40 [27654.639119] ? do_syscall_64+0x6e/0xb0 [27654.639126] ? exit_to_user_mode_prepare+0x37/0xb0 [27654.639132] ? syscall_exit_to_user_mode+0x27/0x50 [27654.639137] ? __x64_sys_newfstatat+0x1e/0x20 [27654.639146] ? do_syscall_64+0x6e/0xb0 [27654.639154] ? exc_page_fault+0x8f/0x170 [27654.639159] ? asm_exc_page_fault+0x8/0x30 [27654.639166] entry_SYSCALL_64_after_hwframe+0x44/0xae [27654.639173] RIP: 0033:0x7faa194a4b2b [27654.639179] Code: 73 01 c3 48 8b 0d 3d 73 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 0d 73 0c 00 f7 d8 64 89 01 48 [27654.639185] RSP: 002b:00007ffc840d0578 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [27654.639191] RAX: ffffffffffffffda RBX: 000056060f9f4e70 RCX: 00007faa194a4b2b [27654.639194] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000056060f9f4ed8 [27654.639197] RBP: 000056060f9f4e70 R08: 0000000000000000 R09: 0000000000000000 [27654.639200] R10: 00007faa1951eac0 R11: 0000000000000206 R12: 000056060f9f4ed8 [27654.639203] R13: 0000000000000000 R14: 000056060f9f4ed8 R15: 00007ffc840d06c8 [27654.639219] ---[ end trace 8dd0ea0bb32ce94a ]--- Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210701144305.110078-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: dwc3: avoid NULL access of usb_gadget_driverLinyu Yuan3-9/+23
we found crash in dwc3_disconnect_gadget(), it is because dwc->gadget_driver become NULL before async access. 7dc0c55e9f30 ('USB: UDC core: Add udc_async_callbacks gadget op') suggest a common way to avoid such kind of issue. this change implment the callback in dwc3 and change related functions which have callback to usb gadget driver. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Linyu Yuan <linyyuan@codeaurora.org> Link: https://lore.kernel.org/r/20210629015118.7944-1-linyyuan@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: max-3421: Prevent corruption of freed memoryMark Tomlinson1-30/+14
The MAX-3421 USB driver remembers the state of the USB toggles for a device/endpoint. To save SPI writes, this was only done when a new device/endpoint was being used. Unfortunately, if the old device was removed, this would cause writes to freed memory. To fix this, a simpler scheme is used. The toggles are read from hardware when a URB is completed, and the toggles are always written to hardware when any URB transaction is started. This will cause a few more SPI transactions, but no causes kernel panics. Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.") Cc: stable <stable@vger.kernel.org> Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20210625031456.8632-1-mark.tomlinson@alliedtelesis.co.nz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: gadget: Fix Unbalanced pm_runtime_enable in tegra_xudc_probeZhang Qilong1-0/+1
Add missing pm_runtime_disable() when probe error out. It could avoid pm_runtime implementation complains when removing and probing again the driver. Fixes: 49db427232fe ("usb: gadget: Add UDC driver for tegra XUSB device mode controller") Cc: stable <stable@vger.kernel.org> Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20210618141441.107817-1-zhangqilong3@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21MAINTAINERS: repair reference in USB IP DRIVER FOR HISILICON KIRIN 970Lukas Bulwahn1-1/+1
Commit 8de6b7edd493 ("phy: phy-hi3670-usb3: move driver from staging into phy") moves phy-hi3670-usb3.c from ./drivers/staging/hikey9xx/ to ./drivers/phy/hisilicon/, but the new file entry in MAINTAINERS refers to ./drivers/phy/hisilicon/phy-kirin970-usb3.c. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains: warning: no file matches F: drivers/phy/hisilicon/phy-kirin970-usb3.c Repair the file entry by referring to the right location. Fixes: 8de6b7edd493 ("phy: phy-hi3670-usb3: move driver from staging into phy") Acked-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20210701093903.28733-1-lukas.bulwahn@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: typec: stusb160x: Don't block probing of consumer of "connector" nodesAmelie Delaunay1-0/+9
Similar as with tcpm this patch lets fw_devlink know not to wait on the fwnode to be populated as a struct device. Without this patch, USB functionality can be broken on some previously supported boards. Fixes: 28ec344bb891 ("usb: typec: tcpm: Don't block probing of consumers of "connector" nodes") Cc: stable <stable@vger.kernel.org> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20210716120718.20398-3-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: typec: stusb160x: register role switch before interrupt registrationAmelie Delaunay1-4/+7
During interrupt registration, attach state is checked. If attached, then the Type-C state is updated with typec_set_xxx functions and role switch is set with usb_role_switch_set_role(). If the usb_role_switch parameter is error or null, the function simply returns 0. So, to update usb_role_switch role if a device is attached before the irq is registered, usb_role_switch must be registered before irq registration. Fixes: da0cb6310094 ("usb: typec: add support for STUSB160x Type-C controller family") Cc: stable <stable@vger.kernel.org> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20210716120718.20398-2-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21USB: usb-storage: Add LaCie Rugged USB3-FW to IGNORE_UASJulian Sikorski1-0/+7
LaCie Rugged USB3-FW appears to be incompatible with UAS. It generates errors like: [ 1151.582598] sd 14:0:0:0: tag#16 uas_eh_abort_handler 0 uas-tag 1 inflight: IN [ 1151.582602] sd 14:0:0:0: tag#16 CDB: Report supported operation codes a3 0c 01 12 00 00 00 00 02 00 00 00 [ 1151.588594] scsi host14: uas_eh_device_reset_handler start [ 1151.710482] usb 2-4: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 1151.741398] scsi host14: uas_eh_device_reset_handler success [ 1181.785534] scsi host14: uas_eh_device_reset_handler start Signed-off-by: Julian Sikorski <belegdol+github@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210720171910.36497-1-belegdol+github@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: ehci: Prevent missed ehci interrupts with edge-triggered MSIDavid Jeffery1-4/+14
When MSI is used by the ehci-hcd driver, it can cause lost interrupts which results in EHCI only continuing to work due to a polling fallback. But the reliance of polling drastically reduces performance of any I/O through EHCI. Interrupts are lost as the EHCI interrupt handler does not safely handle edge-triggered interrupts. It fails to ensure all interrupt status bits are cleared, which works with level-triggered interrupts but not the edge-triggered interrupts typical from using MSI. To fix this problem, check if the driver may have raced with the hardware setting additional interrupt status bits and clear status until it is in a stable state. Fixes: 306c54d0edb6 ("usb: hcd: Try MSI interrupts on PCI devices") Tested-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: David Jeffery <djeffery@redhat.com> Link: https://lore.kernel.org/r/20210715213744.GA44506@redhat Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: hub: Disable USB 3 device initiated lpm if exit latency is too highMathias Nyman1-12/+56
The device initiated link power management U1/U2 states should not be enabled in case the system exit latency plus one bus interval (125us) is greater than the shortest service interval of any periodic endpoint. This is the case for both U1 and U2 sytstem exit latencies and link states. See USB 3.2 section 9.4.9 "Set Feature" for more details Note, before this patch the host and device initiated U1/U2 lpm states were both enabled with lpm. After this patch it's possible to end up with only host inititated U1/U2 lpm in case the exit latencies won't allow device initiated lpm. If this case we still want to set the udev->usb3_lpm_ux_enabled flag so that sysfs users can see the link may go to U1/U2. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210715150122.1995966-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: hub: Fix link power management max exit latency (MEL) calculationsMathias Nyman1-24/+28
Maximum Exit Latency (MEL) value is used by host to know how much in advance it needs to start waking up a U1/U2 suspended link in order to service a periodic transfer in time. Current MEL calculation only includes the time to wake up the path from U1/U2 to U0. This is called tMEL1 in USB 3.1 section C 1.5.2 Total MEL = tMEL1 + tMEL2 +tMEL3 + tMEL4 which should additinally include: - tMEL2 which is the time it takes for PING message to reach device - tMEL3 time for device to process the PING and submit a PING_RESPONSE - tMEL4 time for PING_RESPONSE to traverse back upstream to host. Add the missing tMEL2, tMEL3 and tMEL4 to MEL calculation. Cc: <stable@kernel.org> # v3.5 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210715150122.1995966-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: typec: tipd: Don't block probing of consumer of "connector" nodesMartin Kepplinger1-0/+9
Similar as with tcpm this patch lets fw_devlink know not to wait on the fwnode to be populated as a struct device. Without this patch, USB functionality can be broken on some previously supported boards. Fixes: 28ec344bb891 ("usb: typec: tcpm: Don't block probing of consumers of "connector" nodes") Cc: stable <stable@vger.kernel.org> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Link: https://lore.kernel.org/r/20210714061807.5737-1-martin.kepplinger@puri.sm Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21xhci: Fix lost USB 2 remote wakeMathias Nyman1-1/+2
There's a small window where a USB 2 remote wake may be left unhandled due to a race between hub thread and xhci port event interrupt handler. When the resume event is detected in the xhci interrupt handler it kicks the hub timer, which should move the port from resume to U0 once resume has been signalled for long enough. To keep the hub "thread" running we set a bus_state->resuming_ports flag. This flag makes sure hub timer function kicks itself. checking this flag was not properly protected by the spinlock. Flag was copied to a local variable before lock was taken. The local variable was then checked later with spinlock held. If interrupt is handled right after copying the flag to the local variable we end up stopping the hub thread before it can handle the USB 2 resume. CPU0 CPU1 (hub thread) (xhci event handler) xhci_hub_status_data() status = bus_state->resuming_ports; <Interrupt> handle_port_status() spin_lock() bus_state->resuming_ports = 1 set_flag(HCD_FLAG_POLL_RH) spin_unlock() spin_lock() if (!status) clear_flag(HCD_FLAG_POLL_RH) spin_unlock() Fix this by taking the lock a bit earlier so that it covers the resuming_ports flag copy in the hub thread Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210715150651.1996099-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21Revert "usb: renesas-xhci: Fix handling of unknown ROM state"Moritz Fischer1-8/+8
This reverts commit d143825baf15f204dac60acdf95e428182aa3374. Justin reports some of his systems now fail as result of this commit: xhci_hcd 0000:04:00.0: Direct firmware load for renesas_usb_fw.mem failed with error -2 xhci_hcd 0000:04:00.0: request_firmware failed: -2 xhci_hcd: probe of 0000:04:00.0 failed with error -2 The revert brings back the original issue the commit tried to solve but at least unbreaks existing systems relying on previous behavior. Cc: stable@vger.kernel.org Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Justin Forbes <jmforbes@linuxtx.org> Reported-by: Justin Forbes <jmforbes@linuxtx.org> Signed-off-by: Moritz Fischer <mdf@kernel.org> Fixes: d143825baf15 ("usb: renesas-xhci: Fix handling of unknown ROM state") Link: https://lore.kernel.org/r/20210719070519.41114-1-mdf@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21drm/ttm: Force re-init if ttm_global_init() failsJason Ekstrand1-0/+2
If we have a failure, decrement the reference count so that the next call to ttm_global_init() will actually do something instead of assume everything is all set up. Signed-off-by: Jason Ekstrand <jason@jlekstrand.net> Fixes: 62b53b37e4b1 ("drm/ttm: use a static ttm_bo_global instance") Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210720181357.2760720-5-jason@jlekstrand.net Signed-off-by: Christian König <christian.koenig@amd.com>
2021-07-21scsi: target: Fix NULL dereference on XCOPY completionDavid Disseldorp1-1/+1
CPU affinity control added with commit 39ae3edda325 ("scsi: target: core: Make completion affinity configurable") makes target_complete_cmd() queue work on a CPU based on se_tpg->se_tpg_wwn->cmd_compl_affinity state. LIO's EXTENDED COPY worker is a special case in that read/write cmds are dispatched using the global xcopy_pt_tpg, which carries a NULL se_tpg_wwn pointer following initialization in target_xcopy_setup_pt(). The NULL xcopy_pt_tpg->se_tpg_wwn pointer is dereferenced on completion of any EXTENDED COPY initiated read/write cmds. E.g using the libiscsi SCSI.ExtendedCopy.Simple test: BUG: kernel NULL pointer dereference, address: 00000000000001a8 RIP: 0010:target_complete_cmd+0x9d/0x130 [target_core_mod] Call Trace: fd_execute_rw+0x148/0x42a [target_core_file] ? __dynamic_pr_debug+0xa7/0xe0 ? target_check_reservation+0x5b/0x940 [target_core_mod] __target_execute_cmd+0x1e/0x90 [target_core_mod] transport_generic_new_cmd+0x17c/0x330 [target_core_mod] target_xcopy_issue_pt_cmd+0x9/0x60 [target_core_mod] target_xcopy_read_source.isra.7+0x10b/0x1b0 [target_core_mod] ? target_check_fua+0x40/0x40 [target_core_mod] ? transport_complete_task_attr+0x130/0x130 [target_core_mod] target_xcopy_do_work+0x61f/0xc00 [target_core_mod] This fix makes target_complete_cmd() queue work on se_cmd->cpuid if se_tpg_wwn is NULL. Link: https://lore.kernel.org/r/20210720225522.26291-1-ddiss@suse.de Fixes: 39ae3edda325 ("scsi: target: core: Make completion affinity configurable") Cc: Lee Duncan <lduncan@suse.com> Cc: Mike Christie <michael.christie@oracle.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-21Merge tag 'drm-misc-next-2021-07-16' of ↵Dave Airlie279-14206/+16328
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.15: UAPI Changes: Cross-subsystem Changes: - udmabuf: Add support for mapping hugepages - Add dma-buf stats to sysfs. - Assorted fixes to fbdev/omap2. - dma-buf: Document DMA_BUF_IOCTL_SYNC - Improve dma-buf non-dynamic exporter expectations better. - Add module parameters for dma-buf size and list limit. - Add HDMI codec support to vc4, to replace vc4's own codec. - Document dma-buf implicit fencing rules. - dma_resv_test_signaled test_all handling. Core Changes: - Extract i915's eDP backlight code into DRM helpers. - Assorted docbook updates. - Rework drm_dp_aux documentation. - Add support for the DP aux bus. - Shrink dma-fence-chain slightly. - Add alloc/free helpers for dma-fence-chain. - Assorted fixes to TTM., drm/of, bridge - drm_gem_plane_helper_prepare/cleanup_fb is now the default for gem drivers. - Small fix for scheduler completion. - Remove use of drm_device.irq_enabled. - Print the driver name to dmesg when registering framebuffer. - Export drm/gem's shadow plane handling, and use it in vkms. - Assorted small fixes. Driver Changes: - Add eDP backlight to nouveau. - Assorted fixes and cleanups to nouveau, panfrost, vmwgfx, anx7625, amdgpu, gma500, radeon, mgag200, vgem, vc4, vkms, omapdrm. - Add support for Samsung DB7430, Samsung ATNA33XC20, EDT ETMV570G2DHU, EDT ETM0350G0DH6, Innolux EJ030NA panels. - Fix some simple pannels missing bus_format and connector types. - Add mks-guest-stats instrumentation support to vmwgfx. - Merge i915-ttm topic branch. - Make s6e63m0 panel use Mipi-DBI helpers. - Add detect() supoprt for AST. - Use interrupts for hotplug on vc4. - vmwgfx is now moved to drm-misc-next, as sroland is no longer a maintainer for now. - vmwgfx now uses copies of vmware's internal device headers. - Slowly convert ti-sn65dsi83 over to atomic. - Rework amdgpu dma-resv handling. - Fix virtio fencing for planes. - Ensure amdgpu can always evict to SYSTEM. - Many drivers fixed for implicit fencing rules. - Set default prepare/cleanup fb for tiny, vram and simple helpers too. - Rework panfrost gpu reset and related serialization. - Update VKMS todo list. - Make bochs a tiny gpu driver, and use vram helper. - Use linux irq interfaces instead of drm_irq in some drivers. - Add support for Raspberry Pi Pico to GUD. Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Fri 16 Jul 2021 21:06:04 AEST # gpg: using RSA key B97BD6A80CAC4981091AE547FE558C72A67013C3 # gpg: Good signature from "Maarten Lankhorst <maarten.lankhorst@linux.intel.com>" [expired] # gpg: aka "Maarten Lankhorst <maarten@debian.org>" [expired] # gpg: aka "Maarten Lankhorst <maarten.lankhorst@canonical.com>" [expired] # gpg: Note: This key has expired! # Primary key fingerprint: B97B D6A8 0CAC 4981 091A E547 FE55 8C72 A670 13C3 From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/444811c3-cbec-e9d5-9a6b-9632eda7962a@linux.intel.com
2021-07-21Merge tag 'drm-intel-next-2021-07-08' of ↵Dave Airlie37-1784/+2407
git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 changes for v5.15: Features: - Enable pipe DMC loading on XE-LPD and ADL-P (Anusha) - Finally remove JSH and EHL force probe requirement (Tejas) Refactoring and cleanups: - Refactor and fix DDI buffer translations (Ville) - Clean up FBC CFB allocation code (Ville, with a fix from Matthew) - Finish INTEL_GEN() and friends macro conversions (Lucas) - Misc display cleanups (Ville) Fixes: - PSR fixes and ADL-P workarounds (José) - Fix drm infoframe state mismatch (Bhanuprakash) - Force Type-C PHY disconnect during suspend/shutdown (Imre) - Fix power sequence violation on some Chromebook models (Shawn) - Fix VGA workaround to avoid screen flicker at boot (Emil) - Fix display 12+ watermark workaround adjustment (Lucas) Misc: - Backmerge drm-next (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/878s2h6t5o.fsf@intel.com
2021-07-21ixgbe: Fix packet corruption due to missing DMA syncMarkus Boehme1-1/+2
When receiving a packet with multiple fragments, hardware may still touch the first fragment until the entire packet has been received. The driver therefore keeps the first fragment mapped for DMA until end of packet has been asserted, and delays its dma_sync call until then. The driver tries to fit multiple receive buffers on one page. When using 3K receive buffers (e.g. using Jumbo frames and legacy-rx is turned off/build_skb is being used) on an architecture with 4K pages, the driver allocates an order 1 compound page and uses one page per receive buffer. To determine the correct offset for a delayed DMA sync of the first fragment of a multi-fragment packet, the driver then cannot just use PAGE_MASK on the DMA address but has to construct a mask based on the actual size of the backing page. Using PAGE_MASK in the 3K RX buffer/4K page architecture configuration will always sync the first page of a compound page. With the SWIOTLB enabled this can lead to corrupted packets (zeroed out first fragment, re-used garbage from another packet) and various consequences, such as slow/stalling data transfers and connection resets. For example, testing on a link with MTU exceeding 3058 bytes on a host with SWIOTLB enabled (e.g. "iommu=soft swiotlb=262144,force") TCP transfers quickly fizzle out without this patch. Cc: stable@vger.kernel.org Fixes: 0c5661ecc5dd7 ("ixgbe: fix crash in build_skb Rx code path") Signed-off-by: Markus Boehme <markubo@amazon.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21drm/v3d: Expose performance counters to userspaceJuan A. Suarez Romero8-0/+470
The V3D engine has several hardware performance counters that can of interest for userspace performance analysis tools. This exposes new ioctls to create and destroy performance monitor objects, as well as to query the counter values. Each created performance monitor object has an ID that can be attached to CL/CSD submissions, so the driver enables the requested counters when the job is submitted, and updates the performance monitor values when the job is done. It is up to the user to ensure all the jobs have been finished before getting the performance monitor values. It is also up to the user to properly synchronize BCL jobs when submitting jobs with different performance monitors attached. Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Emma Anholt <emma@anholt.net> To: dri-devel@lists.freedesktop.org Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com> Acked-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210608111541.461991-1-jasuarez@igalia.com
2021-07-20i2c: mpc: Poll for MCFChris Packham1-2/+2
During some transfers the bus can still be busy when an interrupt is received. Commit 763778cd7926 ("i2c: mpc: Restore reread of I2C status register") attempted to address this by re-reading MPC_I2C_SR once but that just made it less likely to happen without actually preventing it. Instead of a single re-read, poll with a timeout so that the bus is given enough time to settle but a genuine stuck SCL is still noticed. Fixes: 1538d82f4647 ("i2c: mpc: Interrupt driven transfer") Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-07-20Merge tag 'at24-fixes-for-v5.14' of ↵Wolfram Sang1-10/+7
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current at24 fixes for v5.14 - fix a problem with repeating labels not getting a device id
2021-07-20drm: protect drm_master pointers in drm_lease.cDesmond Cheong Zhi Xi4-20/+93
drm_file->master pointers should be protected by drm_device.master_mutex or drm_file.master_lookup_lock when being dereferenced. However, in drm_lease.c, there are multiple instances where drm_file->master is accessed and dereferenced while neither lock is held. This makes drm_lease.c vulnerable to use-after-free bugs. We address this issue in 2 ways: 1. Add a new drm_file_get_master() function that calls drm_master_get on drm_file->master while holding on to drm_file.master_lookup_lock. Since drm_master_get increments the reference count of master, this prevents master from being freed until we unreference it with drm_master_put. 2. In each case where drm_file->master is directly accessed and eventually dereferenced in drm_lease.c, we wrap the access in a call to the new drm_file_get_master function, then unreference the master pointer once we are done using it. Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210712043508.11584-6-desmondcheongzx@gmail.com
2021-07-20drm: serialize drm_file.master with a new spinlockDesmond Cheong Zhi Xi3-9/+21
Currently, drm_file.master pointers should be protected by drm_device.master_mutex when being dereferenced. This is because drm_file.master is not invariant for the lifetime of drm_file. If drm_file is not the creator of master, then drm_file.is_master is false, and a call to drm_setmaster_ioctl will invoke drm_new_set_master, which then allocates a new master for drm_file and puts the old master. Thus, without holding drm_device.master_mutex, the old value of drm_file.master could be freed while it is being used by another concurrent process. However, it is not always possible to lock drm_device.master_mutex to dereference drm_file.master. Through the fbdev emulation code, this might occur in a deep nest of other locks. But drm_device.master_mutex is also the outermost lock in the nesting hierarchy, so this leads to potential deadlocks. To address this, we introduce a new spin lock at the bottom of the lock hierarchy that only serializes drm_file.master. With this change, the value of drm_file.master changes only when both drm_device.master_mutex and drm_file.master_lookup_lock are held. Hence, any process holding either of those locks can ensure that the value of drm_file.master will not change concurrently. Since no lock depends on the new drm_file.master_lookup_lock, when drm_file.master is dereferenced, but drm_device.master_mutex cannot be held, we can safely protect the master pointer with drm_file.master_lookup_lock. Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210712043508.11584-5-desmondcheongzx@gmail.com
2021-07-20drm: add a locked version of drm_is_current_masterDesmond Cheong Zhi Xi1-19/+32
While checking the master status of the DRM file in drm_is_current_master(), the device's master mutex should be held. Without the mutex, the pointer fpriv->master may be freed concurrently by another process calling drm_setmaster_ioctl(). This could lead to use-after-free errors when the pointer is subsequently dereferenced in drm_lease_owner(). The callers of drm_is_current_master() from drm_auth.c hold the device's master mutex, but external callers do not. Hence, we implement drm_is_current_master_locked() to be used within drm_auth.c, and modify drm_is_current_master() to grab the device's master mutex before checking the master status. Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210712043508.11584-4-desmondcheongzx@gmail.com
2021-07-20drm: avoid blocking in drm_clients_info's rcu sectionDesmond Cheong Zhi Xi1-1/+2
Inside drm_clients_info, the rcu_read_lock is held to lock pid_task()->comm. However, within this protected section, a call to drm_is_current_master is made, which involves a mutex lock in a future patch. However, this is illegal because the mutex lock might block while in the RCU read-side critical section. Since drm_is_current_master isn't protected by rcu_read_lock, we avoid this by moving it out of the RCU critical section. The following report came from intel-gfx ci's igt@debugfs_test@read_all_entries testcase: ============================= [ BUG: Invalid wait context ] 5.13.0-CI-Patchwork_20515+ #1 Tainted: G W ----------------------------- debugfs_test/1101 is trying to lock: ffff888132d901a8 (&dev->master_mutex){+.+.}-{3:3}, at: drm_is_current_master+0x1e/0x50 other info that might help us debug this: context-{4:4} 3 locks held by debugfs_test/1101: #0: ffff88810fdffc90 (&p->lock){+.+.}-{3:3}, at: seq_read_iter+0x53/0x3b0 #1: ffff888132d90240 (&dev->filelist_mutex){+.+.}-{3:3}, at: drm_clients_info+0x63/0x2a0 #2: ffffffff82734220 (rcu_read_lock){....}-{1:2}, at: drm_clients_info+0x1b1/0x2a0 stack backtrace: CPU: 8 PID: 1101 Comm: debugfs_test Tainted: G W 5.13.0-CI-Patchwork_20515+ #1 Hardware name: Intel Corporation CometLake Client Platform/CometLake S UDIMM (ERB/CRB), BIOS CMLSFWR1.R00.1263.D00.1906260926 06/26/2019 Call Trace: dump_stack+0x7f/0xad __lock_acquire.cold.78+0x2af/0x2ca lock_acquire+0xd3/0x300 ? drm_is_current_master+0x1e/0x50 ? __mutex_lock+0x76/0x970 ? lockdep_hardirqs_on+0xbf/0x130 __mutex_lock+0xab/0x970 ? drm_is_current_master+0x1e/0x50 ? drm_is_current_master+0x1e/0x50 ? drm_is_current_master+0x1e/0x50 drm_is_current_master+0x1e/0x50 drm_clients_info+0x107/0x2a0 seq_read_iter+0x178/0x3b0 seq_read+0x104/0x150 full_proxy_read+0x4e/0x80 vfs_read+0xa5/0x1b0 ksys_read+0x5a/0xd0 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210712043508.11584-3-desmondcheongzx@gmail.com
2021-07-20drm: avoid circular locks in drm_mode_getconnectorDesmond Cheong Zhi Xi1-1/+4
In preparation for a future patch to take a lock on drm_device.master_mutex inside drm_is_current_master(), we first move the call to drm_is_current_master() in drm_mode_getconnector out from the section locked by &dev->mode_config.mutex. This avoids creating a circular lock dependency. Failing to avoid this lock dependency produces the following lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 5.13.0-rc7-CI-CI_DRM_10254+ #1 Not tainted ------------------------------------------------------ kms_frontbuffer/1087 is trying to acquire lock: ffff88810dcd01a8 (&dev->master_mutex){+.+.}-{3:3}, at: drm_is_current_master+0x1b/0x40 but task is already holding lock: ffff88810dcd0488 (&dev->mode_config.mutex){+.+.}-{3:3}, at: drm_mode_getconnector+0x1c6/0x4a0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&dev->mode_config.mutex){+.+.}-{3:3}: __mutex_lock+0xab/0x970 drm_client_modeset_probe+0x22e/0xca0 __drm_fb_helper_initial_config_and_unlock+0x42/0x540 intel_fbdev_initial_config+0xf/0x20 [i915] async_run_entry_fn+0x28/0x130 process_one_work+0x26d/0x5c0 worker_thread+0x37/0x380 kthread+0x144/0x170 ret_from_fork+0x1f/0x30 -> #1 (&client->modeset_mutex){+.+.}-{3:3}: __mutex_lock+0xab/0x970 drm_client_modeset_commit_locked+0x1c/0x180 drm_client_modeset_commit+0x1c/0x40 __drm_fb_helper_restore_fbdev_mode_unlocked+0x88/0xb0 drm_fb_helper_set_par+0x34/0x40 intel_fbdev_set_par+0x11/0x40 [i915] fbcon_init+0x270/0x4f0 visual_init+0xc6/0x130 do_bind_con_driver+0x1e5/0x2d0 do_take_over_console+0x10e/0x180 do_fbcon_takeover+0x53/0xb0 register_framebuffer+0x22d/0x310 __drm_fb_helper_initial_config_and_unlock+0x36c/0x540 intel_fbdev_initial_config+0xf/0x20 [i915] async_run_entry_fn+0x28/0x130 process_one_work+0x26d/0x5c0 worker_thread+0x37/0x380 kthread+0x144/0x170 ret_from_fork+0x1f/0x30 -> #0 (&dev->master_mutex){+.+.}-{3:3}: __lock_acquire+0x151e/0x2590 lock_acquire+0xd1/0x3d0 __mutex_lock+0xab/0x970 drm_is_current_master+0x1b/0x40 drm_mode_getconnector+0x37e/0x4a0 drm_ioctl_kernel+0xa8/0xf0 drm_ioctl+0x1e8/0x390 __x64_sys_ioctl+0x6a/0xa0 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: &dev->master_mutex --> &client->modeset_mutex --> &dev->mode_config.mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&dev->mode_config.mutex); lock(&client->modeset_mutex); lock(&dev->mode_config.mutex); lock(&dev->master_mutex); *** DEADLOCK *** 1 lock held by kms_frontbuffer/1087: #0: ffff88810dcd0488 (&dev->mode_config.mutex){+.+.}-{3:3}, at: drm_mode_getconnector+0x1c6/0x4a0 stack backtrace: CPU: 7 PID: 1087 Comm: kms_frontbuffer Not tainted 5.13.0-rc7-CI-CI_DRM_10254+ #1 Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3234.A01.1906141750 06/14/2019 Call Trace: dump_stack+0x7f/0xad check_noncircular+0x12e/0x150 __lock_acquire+0x151e/0x2590 lock_acquire+0xd1/0x3d0 __mutex_lock+0xab/0x970 drm_is_current_master+0x1b/0x40 drm_mode_getconnector+0x37e/0x4a0 drm_ioctl_kernel+0xa8/0xf0 drm_ioctl+0x1e8/0x390 __x64_sys_ioctl+0x6a/0xa0 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210712043508.11584-2-desmondcheongzx@gmail.com
2021-07-20s390: update defconfigsHeiko Carstens3-17/+34
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-07-20s390/cpumf: fix semicolon.cocci warningskernel test robot1-1/+1
arch/s390/kernel/perf_cpum_cf.c:748:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: a029a4eab39e ("s390/cpumf: Allow concurrent access for CPU Measurement Counter Facility") CC: Thomas Richter <tmricht@linux.ibm.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-07-20s390/boot: fix use of expolines in the DMA codeAlexander Egorenkov1-15/+4
The DMA code section of the decompressor must be compiled with expolines if Spectre V2 mitigation has been enabled for the decompressed kernel. This is required because although the decompressor's image contains the DMA code section, it is handed over to the decompressed kernel for use. Because the DMA code is already slow w/o expolines, use expolines always regardless whether the decompressed kernel is using them or not. This simplifies the DMA code by dropping the conditional compilation of expolines. Fixes: bf72630130c2 ("s390: use proper expoline sections for .dma code") Cc: <stable@vger.kernel.org> # 5.2 Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-07-20ceph: don't WARN if we're still opening a session to an MDSLuis Henriques1-1/+1
If MDSs aren't available while mounting a filesystem, the session state will transition from SESSION_OPENING to SESSION_CLOSING. And in that scenario check_session_state() will be called from delayed_work() and trigger this WARN. Avoid this by only WARNing after a session has already been established (i.e., the s_ttl will be different from 0). Fixes: 62575e270f66 ("ceph: check session state after bumping session->s_seq") Signed-off-by: Luis Henriques <lhenriques@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-07-20rbd: don't hold lock_rwsem while running_list is being drainedIlya Dryomov1-7/+5
Currently rbd_quiesce_lock() holds lock_rwsem for read while blocking on releasing_wait completion. On the I/O completion side, each image request also needs to take lock_rwsem for read. Because rw_semaphore implementation doesn't allow new readers after a writer has indicated interest in the lock, this can result in a deadlock if something that needs to take lock_rwsem for write gets involved. For example: 1. watch error occurs 2. rbd_watch_errcb() takes lock_rwsem for write, clears owner_cid and releases lock_rwsem 3. after reestablishing the watch, rbd_reregister_watch() takes lock_rwsem for write and calls rbd_reacquire_lock() 4. rbd_quiesce_lock() downgrades lock_rwsem to for read and blocks on releasing_wait until running_list becomes empty 5. another watch error occurs 6. rbd_watch_errcb() blocks trying to take lock_rwsem for write 7. no in-flight image request can complete and delete itself from running_list because lock_rwsem won't be granted anymore A similar scenario can occur with "lock has been acquired" and "lock has been released" notification handers which also take lock_rwsem for write to update owner_cid. We don't actually get anything useful from sitting on lock_rwsem in rbd_quiesce_lock() -- owner_cid updates certainly don't need to be synchronized with. In fact the whole owner_cid tracking logic could probably be removed from the kernel client because we don't support proxied maintenance operations. Cc: stable@vger.kernel.org # 5.3+ URL: https://tracker.ceph.com/issues/42757 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Tested-by: Robin Geuze <robin.geuze@nl.team.blue>
2021-07-20rbd: always kick acquire on "acquired" and "released" notificationsIlya Dryomov1-13/+7
Skipping the "lock has been released" notification if the lock owner is not what we expect based on owner_cid can lead to I/O hangs. One example is our own notifications: because owner_cid is cleared in rbd_unlock(), when we get our own notification it is processed as unexpected/duplicate and maybe_kick_acquire() isn't called. If a peer that requested the lock then doesn't go through with acquiring it, I/O requests that came in while the lock was being quiesced would be stalled until another I/O request is submitted and kicks acquire from rbd_img_exclusive_lock(). This makes the comment in rbd_release_lock() actually true: prior to this change the canceled work was being requeued in response to the "lock has been acquired" notification from rbd_handle_acquired_lock(). Cc: stable@vger.kernel.org # 5.3+ Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Tested-by: Robin Geuze <robin.geuze@nl.team.blue>
2021-07-20ALSA: hda/hdmi: Add quirk to force pin connectivity on NUC10Kai Vehmanen1-0/+1
On some Intel NUC10 variants, codec reports AC_JACK_PORT_NONE as pin default config for all pins. This results in broken audio. Add a quirk to force connectivity. BugLink: https://github.com/clearlinux/distribution/issues/2396 Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210720153216.2200938-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-07-20Revert "qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()"Jia He1-17/+6
This reverts commit 6206b7981a36476f4695d661ae139f7db36a802d. That patch added additional spin_{un}lock_bh(), which was harmless but pointless. The orginal code path has guaranteed the pair of spin_{un}lock_bh(). We'd better revert it before we find the exact root cause of the bug_on mentioned in that patch. Fixes: 6206b7981a36 ("qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()") Cc: David S. Miller <davem@davemloft.net> Cc: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Jia He <justin.he@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 15:48:53 +0300