| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This allows userspace to tell kernel to add a new subflow to an existing
mptcp connection.
Userspace provides the token to identify the mptcp-level connection
that needs a change in active subflows and the local and remote
addresses of the new or the to-be-removed subflow.
MPTCP_PM_CMD_SUBFLOW_CREATE requires the following parameters:
{ token, { loc_id, family, loc_addr4 | loc_addr6 }, { family, rem_addr4 |
rem_addr6, rem_port }
MPTCP_PM_CMD_SUBFLOW_DESTROY requires the following parameters:
{ token, { family, loc_addr4 | loc_addr6, loc_port }, { family, rem_addr4 |
rem_addr6, rem_port }
Acked-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change updates the "pm_nl_ctl" testing sample with a "rem"
(remove) option to support the newly added netlink interface command
MPTCP_PM_CMD_REMOVE to issue a REMOVE_ADDR signal over the
chosen MPTCP connection.
E.g. ./pm_nl_ctl rem token 823274047 id 23
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change adds a MPTCP netlink command for issuing a
REMOVE_ADDR signal for an address over the chosen MPTCP
connection from a userspace path manager.
The command requires the following parameters: {token, loc_id}.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change updates the "pm_nl_ctl" testing sample with an "ann"
(announce) option to support the newly added netlink interface command
MPTCP_PM_CMD_ANNOUNCE to issue ADD_ADDR advertisements over the
chosen MPTCP connection.
E.g. ./pm_nl_ctl ann 192.168.122.75 token 823274047 id 25 dev enp1s0
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change adds a MPTCP netlink interface for issuing
ADD_ADDR advertisements over the chosen MPTCP connection from a
userspace path manager.
The command requires the following parameters:
{ token, { loc_id, family, daddr4 | daddr6 [, dport] } [, if_idx],
flags[signal] }.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Next patch will need to parse MPTCP_PM_ATTR_ADDR attributes and
fill an mptcp_addr_info structure from a different genl command
callback.
To avoid copy-paste, split the existing function to a helper
that does the common part and then call the helper from the
(renamed)mptcp_pm_parse_entry function.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change introduces a parallel path in the kernel for retrieving
the local id, flags, if_index for an addr entry in the context of
an MPTCP connection that's being managed by a userspace PM. The
userspace and in-kernel PM modes deviate in their procedures for
obtaining this information.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change adds an internal function to store/retrieve local
addrs announced by userspace PM implementations to/from its kernel
context. The function addresses the requirements of three scenarios:
1) ADD_ADDR announcements (which require that a local id be
provided), 2) retrieving the local id associated with an address,
and also where one may need to be assigned, and 3) reissuance of
ADD_ADDRs when there's a successful match of addr/id.
The list of all stored local addr entries is held under the
MPTCP sock structure. Memory for these entries is allocated from
the sock option buffer, so the list of addrs is bounded by optmem_max.
The list if not released via REMOVE_ADDR signals is ultimately
freed when the sock is destructed.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently MBSSID parameters in struct ieee80211_bss_conf
are not reset upon connection. This could be problematic
with some drivers in a scenario where the device first
connects to a non-transmit BSS and then connects to a
transmit BSS of a Multi BSS AP. The MBSSID parameters
which are set after connecting to a non-transmit BSS will
not be reset and the same parameters will be passed on to
the driver during the subsequent connection to a transmit
BSS of a Multi BSS AP.
For example, firmware running on the ath11k device uses the
Multi BSS data for tracking the beacon of a non-transmit BSS
and reports the driver when there is a beacon miss. If we do
not reset the MBSSID parameters during the subsequent
connection to a transmit BSS, then the driver would have
wrong MBSSID data and FW would be looking for an incorrect
BSSID in the MBSSID beacon of a Multi BSS AP and reports
beacon loss leading to an unstable connection.
Reset the MBSSID parameters upon every connection to solve this
problem.
Fixes: 78ac51f81532 ("mac80211: support multi-bssid")
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Link: https://lore.kernel.org/r/20220428052744.27040-1-quic_mpubbise@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When retrieving the S1G channel number from IEs, we should retrieve
the operating channel instead of the primary channel. The S1G operation
element specifies the main channel of operation as the oper channel,
unlike for HT and HE which specify their main channel of operation as
the primary channel.
Signed-off-by: Kieran Frewen <kieran.frewen@morsemicro.com>
Signed-off-by: Bassem Dawood <bassem@morsemicro.com>
Link: https://lore.kernel.org/r/20220420041321.3788789-1-kieran.frewen@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Validate the S1G channel width input by user to ensure it matches
that of the requested channel
Signed-off-by: Kieran Frewen <kieran.frewen@morsemicro.com>
Signed-off-by: Bassem Dawood <bassem@morsemicro.com>
Link: https://lore.kernel.org/r/20220420041321.3788789-2-kieran.frewen@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When the QoS ack policy was set to non explicit / psmp ack, frames are treated
as not being part of a BA session, which causes extra latency on reordering.
Fix this by only bypassing reordering for packets with no-ack policy
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220420105038.36443-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This is required to make loading this as a module work.
Signed-off-by: Hector Martin <marcan@marcan.st>
Fixes: 46d1fb072e76 ("iommu/dart: Add DART iommu driver")
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20220502092238.30486-1-marcan@marcan.st
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The IT6505 is using functions provided by the DRM_DP_HELPER driver.
In order to avoid having the bridge enabled but the helper disabled,
let's add a select in order to be sure that the DP helper functions are
always available.
Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver")
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220426141536.274727-1-fparent@baylibre.com
|
|
The cited commits didn't use proper matching on inner TTC
as a result distribution of encapsulated packets wasn't symmetric
between the physical ports.
Fixes: 4c71ce50d2fe ("net/mlx5: Support partial TTC rules")
Fixes: 8e25a2bc6687 ("net/mlx5: Lag, add support to create TTC tables for LAG port selection")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Double clear of reset requested state can lead to NULL pointer as it
will try to delete the timer twice. This can happen for example on a
race between abort from FW and pci error or reset. Avoid such case using
test_and_clear_bit() to verify only one time reset requested state clear
flow. Similarly use test_and_set_bit() to verify only one time reset
requested state set flow.
Fixes: 7dd6df329d4c ("net/mlx5: Handle sync reset abort event")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The sync reset flow can lead to the following deadlock when
poll_sync_reset() is called by timer softirq and waiting on
del_timer_sync() for the same timer. Fix that by moving the part of the
flow that waits for the timer to reset_reload_work.
It fixes the following kernel Trace:
RIP: 0010:del_timer_sync+0x32/0x40
...
Call Trace:
<IRQ>
mlx5_sync_reset_clear_reset_requested+0x26/0x50 [mlx5_core]
poll_sync_reset.cold+0x36/0x52 [mlx5_core]
call_timer_fn+0x32/0x130
__run_timers.part.0+0x180/0x280
? tick_sched_handle+0x33/0x60
? tick_sched_timer+0x3d/0x80
? ktime_get+0x3e/0xa0
run_timer_softirq+0x2a/0x50
__do_softirq+0xe1/0x2d6
? hrtimer_interrupt+0x136/0x220
irq_exit+0xae/0xb0
smp_apic_timer_interrupt+0x7b/0x140
apic_timer_interrupt+0xf/0x20
</IRQ>
Fixes: 3c5193a87b0f ("net/mlx5: Use del_timer_sync in fw reset flow of halting poll")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Setting dscp2prio during the driver reload can cause dcb ieee app list to
be not empty after the reload finish and as a result to a conflict between
the priority trust state reported by the app and the state in the device
register.
Reset the dcb ieee app list on initialization in case this is
conflicting with the register status.
Fixes: 2a5e7a1344f4 ("net/mlx5e: Add dcbnl dscp to priority support")
Signed-off-by: Moshe Tal <moshet@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
During TC action parsing, the can_offload callback is called
before calling the action's main parsing callback.
Later on, the can_offload callback is called again before handling
the action's post_parse callback if exists.
Since the main parsing callback might have changed and set parsing
params for the rule, following can_offload checks might fail because
some parsing params were already set.
Specifically, the ct action main parsing sets the ct param in the
parsing status structure and when the second can_offload for ct action
is called, before handling the ct post parsing, it will return an error
since it checks this ct param to indicate multiple ct actions which are
not supported.
Therefore, the can_offload call is removed from the post parsing
handling to prevent such cases.
This is allowed since the first can_offload call will ensure that the
action can be offloaded and the fact the code reached the post parsing
handling already means that the action can be offloaded.
Fixes: 8300f225268b ("net/mlx5e: Create new flow attr for multi table actions")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
__mlx5_tc_ct_entry_put() queues release of tuple related to some ct FT,
if that is the last reference to that tuple, the actual deletion of
the tuple can happen after the FT is already destroyed and freed.
Flush the used workqueue before destroying the ct FT.
Fixes: a2173131526d ("net/mlx5e: CT: manage the lifetime of the ct entry object")
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When resolving the decap route device for a tunnel decap rule,
the result may be an OVS internal port device.
Prior to adding the support for internal port offload, such case
would result in using the uplink as the default decap route device
which allowed devices that can't support internal port offload
to offload this decap rule.
This behavior got broken by adding the internal port offload which
will fail in case the device can't support internal port offload.
To restore the old behavior, use the uplink device as the decap
route as before when internal port offload is not supported.
Fixes: b16eb3c81fe2 ("net/mlx5: Support internal port as decap route device")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
ct_clear action is translated to clearing reg_c metadata
which holds ct state and zone information using mod header
actions.
These actions are allocated during the actions parsing, as
part of the flow attributes main mod header action list.
If ct action exists in the rule, the flow's main mod header
is used only in the post action table rule, after the ct tables
which set the ct info in the reg_c as part of the ct actions.
Therefore, if the original rule has a ct_clear action followed
by a ct action, the ct action reg_c setting will be done first and
will be followed by the ct_clear resetting reg_c and overwriting
the ct info.
Fix this by moving the ct_clear mod header actions allocation from
the ct action parsing stage to the ct action post parsing stage where
it is already known if ct_clear is followed by a ct action.
In such case, we skip the mod header actions allocation for the ct
clear since the ct action will write to reg_c anyway after clearing it.
Fixes: 806401c20a0f ("net/mlx5e: CT, Fix multiple allocations and memleak of mod acts")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Referenced change added check to skip updating fib when new fib instance
has same or lower priority. However, new fib instance can be an update on
same dst address as existing one even though the structure is another
instance that has different address. Ignoring events on such instances
causes multipath LAG state to not be correctly updated.
Track 'dst' and 'dst_len' fields of fib event fib_entry_notifier_info
structure and don't skip events that have the same value of that fields.
Fixes: ad11c4f1d8fd ("net/mlx5e: Lag, Only handle events from highest priority multipath entry")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Referenced change incorrectly sets single path fib_info even when LAG is
not active. Fix it by moving call to mlx5_lag_fib_set() into conditional
that verifies LAG state.
Fixes: ad11c4f1d8fd ("net/mlx5e: Lag, Only handle events from highest priority multipath entry")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Recent commit that modified fib route event handler to handle events
according to their priority introduced use-after-free[0] in mp->mfi pointer
usage. The pointer now is not just cached in order to be compared to
following fib_info instances, but is also dereferenced to obtain
fib_priority. However, since mlx5 lag code doesn't hold the reference to
fin_info during whole mp->mfi lifetime, it could be used after fib_info
instance has already been freed be kernel infrastructure code.
Don't ever dereference mp->mfi pointer. Refactor it to be 'const void*'
type and cache fib_info priority in dedicated integer. Group
fib_info-related data into dedicated 'fib' structure that will be further
extended by following patches in the series.
[0]:
[ 203.588029] ==================================================================
[ 203.590161] BUG: KASAN: use-after-free in mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core]
[ 203.592386] Read of size 4 at addr ffff888144df2050 by task kworker/u20:4/138
[ 203.594766] CPU: 3 PID: 138 Comm: kworker/u20:4 Tainted: G B 5.17.0-rc7+ #6
[ 203.596751] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 203.598813] Workqueue: mlx5_lag_mp mlx5_lag_fib_update [mlx5_core]
[ 203.600053] Call Trace:
[ 203.600608] <TASK>
[ 203.601110] dump_stack_lvl+0x48/0x5e
[ 203.601860] print_address_description.constprop.0+0x1f/0x160
[ 203.602950] ? mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core]
[ 203.604073] ? mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core]
[ 203.605177] kasan_report.cold+0x83/0xdf
[ 203.605969] ? mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core]
[ 203.607102] mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core]
[ 203.608199] ? mlx5_lag_init_fib_work+0x1c0/0x1c0 [mlx5_core]
[ 203.609382] ? read_word_at_a_time+0xe/0x20
[ 203.610463] ? strscpy+0xa0/0x2a0
[ 203.611463] process_one_work+0x722/0x1270
[ 203.612344] worker_thread+0x540/0x11e0
[ 203.613136] ? rescuer_thread+0xd50/0xd50
[ 203.613949] kthread+0x26e/0x300
[ 203.614627] ? kthread_complete_and_exit+0x20/0x20
[ 203.615542] ret_from_fork+0x1f/0x30
[ 203.616273] </TASK>
[ 203.617174] Allocated by task 3746:
[ 203.617874] kasan_save_stack+0x1e/0x40
[ 203.618644] __kasan_kmalloc+0x81/0xa0
[ 203.619394] fib_create_info+0xb41/0x3c50
[ 203.620213] fib_table_insert+0x190/0x1ff0
[ 203.621020] fib_magic.isra.0+0x246/0x2e0
[ 203.621803] fib_add_ifaddr+0x19f/0x670
[ 203.622563] fib_inetaddr_event+0x13f/0x270
[ 203.623377] blocking_notifier_call_chain+0xd4/0x130
[ 203.624355] __inet_insert_ifa+0x641/0xb20
[ 203.625185] inet_rtm_newaddr+0xc3d/0x16a0
[ 203.626009] rtnetlink_rcv_msg+0x309/0x880
[ 203.626826] netlink_rcv_skb+0x11d/0x340
[ 203.627626] netlink_unicast+0x4cc/0x790
[ 203.628430] netlink_sendmsg+0x762/0xc00
[ 203.629230] sock_sendmsg+0xb2/0xe0
[ 203.629955] ____sys_sendmsg+0x58a/0x770
[ 203.630756] ___sys_sendmsg+0xd8/0x160
[ 203.631523] __sys_sendmsg+0xb7/0x140
[ 203.632294] do_syscall_64+0x35/0x80
[ 203.633045] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 203.634427] Freed by task 0:
[ 203.635063] kasan_save_stack+0x1e/0x40
[ 203.635844] kasan_set_track+0x21/0x30
[ 203.636618] kasan_set_free_info+0x20/0x30
[ 203.637450] __kasan_slab_free+0xfc/0x140
[ 203.638271] kfree+0x94/0x3b0
[ 203.638903] rcu_core+0x5e4/0x1990
[ 203.639640] __do_softirq+0x1ba/0x5d3
[ 203.640828] Last potentially related work creation:
[ 203.641785] kasan_save_stack+0x1e/0x40
[ 203.642571] __kasan_record_aux_stack+0x9f/0xb0
[ 203.643478] call_rcu+0x88/0x9c0
[ 203.644178] fib_release_info+0x539/0x750
[ 203.644997] fib_table_delete+0x659/0xb80
[ 203.645809] fib_magic.isra.0+0x1a3/0x2e0
[ 203.646617] fib_del_ifaddr+0x93f/0x1300
[ 203.647415] fib_inetaddr_event+0x9f/0x270
[ 203.648251] blocking_notifier_call_chain+0xd4/0x130
[ 203.649225] __inet_del_ifa+0x474/0xc10
[ 203.650016] devinet_ioctl+0x781/0x17f0
[ 203.650788] inet_ioctl+0x1ad/0x290
[ 203.651533] sock_do_ioctl+0xce/0x1c0
[ 203.652315] sock_ioctl+0x27b/0x4f0
[ 203.653058] __x64_sys_ioctl+0x124/0x190
[ 203.653850] do_syscall_64+0x35/0x80
[ 203.654608] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 203.666952] The buggy address belongs to the object at ffff888144df2000
which belongs to the cache kmalloc-256 of size 256
[ 203.669250] The buggy address is located 80 bytes inside of
256-byte region [ffff888144df2000, ffff888144df2100)
[ 203.671332] The buggy address belongs to the page:
[ 203.672273] page:00000000bf6c9314 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x144df0
[ 203.674009] head:00000000bf6c9314 order:2 compound_mapcount:0 compound_pincount:0
[ 203.675422] flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff)
[ 203.676819] raw: 002ffff800010200 0000000000000000 dead000000000122 ffff888100042b40
[ 203.678384] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
[ 203.679928] page dumped because: kasan: bad access detected
[ 203.681455] Memory state around the buggy address:
[ 203.682421] ffff888144df1f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 203.683863] ffff888144df1f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 203.685310] >ffff888144df2000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 203.686701] ^
[ 203.687820] ffff888144df2080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 203.689226] ffff888144df2100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 203.690620] ==================================================================
Fixes: ad11c4f1d8fd ("net/mlx5e: Lag, Only handle events from highest priority multipath entry")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The arguments of update_buffer_lossy() is in a wrong order. Fix it.
Fixes: 88b3d5c90e96 ("net/mlx5e: Fix port buffers cell size value")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently, match VLAN rule also matches packets that have multiple VLAN
headers. This behavior is similar to buggy flower classifier behavior that
has recently been fixed. Fix the issue by matching on
outer_second_cvlan_tag with value 0 which will cause the HW to verify the
packet doesn't contain second vlan header.
Fixes: 699e96ddf47f ("net/mlx5e: Support offloading tc double vlan headers match")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Resource dump menu may span over more than a single page, support it.
Otherwise, menu read may result in a memory access violation: reading
outside of the allocated page.
Note that page format of the first menu page contains menu headers while
the proceeding menu pages contain only records.
The KASAN logs are as follows:
BUG: KASAN: slab-out-of-bounds in strcmp+0x9b/0xb0
Read of size 1 at addr ffff88812b2e1fd0 by task systemd-udevd/496
CPU: 5 PID: 496 Comm: systemd-udevd Tainted: G B 5.16.0_for_upstream_debug_2022_01_10_23_12 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x7d
print_address_description.constprop.0+0x1f/0x140
? strcmp+0x9b/0xb0
? strcmp+0x9b/0xb0
kasan_report.cold+0x83/0xdf
? strcmp+0x9b/0xb0
strcmp+0x9b/0xb0
mlx5_rsc_dump_init+0x4ab/0x780 [mlx5_core]
? mlx5_rsc_dump_destroy+0x80/0x80 [mlx5_core]
? lockdep_hardirqs_on_prepare+0x286/0x400
? raw_spin_unlock_irqrestore+0x47/0x50
? aomic_notifier_chain_register+0x32/0x40
mlx5_load+0x104/0x2e0 [mlx5_core]
mlx5_init_one+0x41b/0x610 [mlx5_core]
....
The buggy address belongs to the object at ffff88812b2e0000
which belongs to the cache kmalloc-4k of size 4096
The buggy address is located 4048 bytes to the right of
4096-byte region [ffff88812b2e0000, ffff88812b2e1000)
The buggy address belongs to the page:
page:000000009d69807a refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88812b2e6000 pfn:0x12b2e0
head:000000009d69807a order:3 compound_mapcount:0 compound_pincount:0
flags: 0x8000000000010200(slab|head|zone=2)
raw: 8000000000010200 0000000000000000 dead000000000001 ffff888100043040
raw: ffff88812b2e6000 0000000080040000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88812b2e1e80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88812b2e1f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88812b2e1f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff88812b2e2000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88812b2e2080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Fixes: 12206b17235a ("net/mlx5: Add support for resource dump")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When OVS internal port is the vtep device, the first decap
rule is matching on the internal port's vport metadata value
and then changes the metadata to be the uplink's value.
Therefore, following rules on the tunnel, in chain > 0, should
avoid matching on internal port metadata and use the uplink
vport metadata instead.
Select the uplink's metadata value for the source vport match
in case the rule is in chain greater than zero, even if the tunnel
route device is internal port.
Fixes: 166f431ec6be ("net/mlx5e: Add indirect tc offload of ovs internal port")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently, all released FW versions support only two IPsec object
modifiers, and modify_field_select get and set same value with
proper bits.
However, it is not future compatible, as new FW can have more
modifiers and "default" will cause to overwrite not-changed fields.
Fix it by setting explicitly fields that need to be overwritten.
Fixes: 7ed92f97a1ad ("net/mlx5e: IPsec: Add Connect-X IPsec ESN update offload support")
Signed-off-by: Huy Nguyen <huyn@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
There is no need to perform extra lookup in order to get already
known sec_path that was set a couple of lines above. Simply reuse it.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Remove everything that is not used or from mlx5_accel_esp_xfrm_attrs,
together with change type of spi to store proper type from the beginning.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
mlx5 doesn't allow to configure any AEAD ICV length other than 128,
so remove the logic that configures other unsupported values.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Reduce number of hard-coded IPsec capabilities by making sure
that mlx5_ipsec_device_caps() sets only supported bits.
As part of this change, remove _ACCEL_ notations from the capabilities
names as they represent IPsec-capable device, so it is aligned with
MLX5_CAP_IPSEC() macro. And prepare the code to IPsec full offload mode.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Device that lacks proper IPsec capabilities won't pass mlx5e_ipsec_init()
later, so no need to advertise HW netdev offload support for something that
isn't going to work anyway.
Fixes: 8ad893e516a7 ("net/mlx5e: Remove dependency in IPsec initialization flows")
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The IPsec FS code was implemented with anti-pattern there failures
in create functions left the system with dangling pointers that were
cleaned in global routines.
The less error prone approach is to make sure that failed function
cleans everything internally.
As part of this change, we remove the batch of one liners and rewrite
get/put functions to remove ambiguity.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Reuse existing struct to pass parameters instead of open code them.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
SA context logic used multiple structures to store same data
over and over. By simplifying the SA context interfaces, we
can remove extra structs.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
This change cleanups the mlx5 esp interface.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The mlx5 IPsec code has logical separation between code that operates
with XFRM objects (ipsec.c), HW objects (ipsec_offload.c), flow steering
logic (ipsec_fs.c) and data path (ipsec_rxtx.c).
Such separation makes sense for C-files, but isn't needed at all for
H-files as they are included in batch anyway.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
All callers build xfrm attributes with help of mlx5e_ipsec_build_accel_xfrm_attrs()
function that ensure validity of attributes. There is no need to recheck
them again.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
mlx5 IPsec code updated ESN through workqueue with allocation calls
in the data path, which can be saved easily if the work is created
during XFRM state initialization routine.
The locking used later in the work didn't protect from anything because
change of HW context is possible during XFRM state add or delete only,
which can cancel work and make sure that it is not running.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
There is no need in one-liners wrappers to call internal functions.
Let's remove them.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The XFRM code performs fallback to software IPsec if .xdo_dev_state_add()
returns -EOPNOTSUPP. This is what mlx5 did very deep in its stack trace,
despite have all the knowledge that IPsec is not going to work in very
early stage.
This is achieved by making sure that priv->ipsec pointer is valid for
fully working and supported hardware crypto IPsec engine.
In case, the hardware IPsec is not supported, the XFRM code will set NULL
to xso->dev and it will prevent from calls to various .xdo_dev_state_*()
callbacks.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Ensure that flow steering is usable as early as possible, to understand
if crypto IPsec is supported or not.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Remove multiple function wrappers to make sure that IPsec FS initialization
and cleanup functions present in one place to help with code readability.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Michael Chan says:
====================
bnxt_en: Bug fixes
This patch series includes 3 fixes:
- Fix an occasional VF open failure.
- Fix a PTP spinlock usage before initialization
- Fix unnecesary RX packet drops under high TX traffic load.
====================
Link: https://lore.kernel.org/r/1651540392-2260-1-git-send-email-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In bnxt_poll_p5(), we first check cpr->has_more_work. If it is true,
we are in NAPI polling mode and we will call __bnxt_poll_cqs() to
continue polling. It is possible to exhanust the budget again when
__bnxt_poll_cqs() returns.
We then enter the main while loop to check for new entries in the NQ.
If we had previously exhausted the NAPI budget, we may call
__bnxt_poll_work() to process an RX entry with zero budget. This will
cause packets to be dropped unnecessarily, thinking that we are in the
netpoll path. Fix it by breaking out of the while loop if we need
to process an RX NQ entry with no budget left. We will then exit
NAPI and stay in polling mode.
Fixes: 389a877a3b20 ("bnxt_en: Process the NQ under NAPI continuous polling.")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bnxt_ptp_init() calls bnxt_ptp_init_rtc() which will acquire the ptp_lock
spinlock. The spinlock is not initialized until later. Move the
bnxt_ptp_init_rtc() call after the spinlock is initialized.
Fixes: 24ac1ecd5240 ("bnxt_en: Add driver support to use Real Time Counter for PTP")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bnxt_open() can fail in this code path, especially on a VF when
it fails to reserve default rings:
bnxt_open()
__bnxt_open_nic()
bnxt_clear_int_mode()
bnxt_init_dflt_ring_mode()
RX rings would be set to 0 when we hit this error path.
It is possible for a subsequent bnxt_open() call to potentially succeed
with a code path like this:
bnxt_open()
bnxt_hwrm_if_change()
bnxt_fw_init_one()
bnxt_fw_init_one_p3()
bnxt_set_dflt_rfs()
bnxt_rfs_capable()
bnxt_hwrm_reserve_rings()
On older chips, RFS is capable if we can reserve the number of vnics that
is equal to RX rings + 1. But since RX rings is still set to 0 in this
code path, we may mistakenly think that RFS is supported for 0 RX rings.
Later, when the default RX rings are reserved and we try to enable
RFS, it would fail and cause bnxt_open() to fail unnecessarily.
We fix this in 2 places. bnxt_rfs_capable() will always return false if
RX rings is not yet set. bnxt_init_dflt_ring_mode() will call
bnxt_set_dflt_rfs() which will always clear the RFS flags if RFS is not
supported.
Fixes: 20d7d1c5c9b1 ("bnxt_en: reliably allocate IRQ table on reset to avoid crash")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
