summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-07-31ice: Don't return error for disabling LAN Tx queue that does existAkeem G Abodunrin1-0/+3
Since Tx rings are being managed by FW/NVM, Tx rings might have not been set up or driver had already wiped them off - In that case, call to disable LAN Tx queue is being returned as not in existence. This patch makes sure we don't return unnecessary error for such scenario. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-07-31ice: Remove duplicate code in ice_alloc_rx_bufsBrett Creeley1-11/+3
Currently if the call to ice_alloc_mapped_page() fails we jump to the no_buf label, possibly call ice_release_rx_desc(), and return true indicating that there is more work to do. In the success case we just fall out of the while loop, possibly call ice_alloc_mapped_page(), and return false saying we exhausted cleaned_count. This flow can be improved by breaking if ice_alloc_mapped_page() fails and then the flow outside of the while loop is the same for the failure and success case. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-07-31ice: Add stats for Rx drops at the port levelBrett Creeley2-0/+7
Currently we are not reporting dropped counts at the port level to ethtool or netlink. This was found when debugging Rx dropped issues and the total packets sent did not equal the total packets received minus the rx_dropped, which was very confusing. To determine dropped counts at the port level we need to read the PRTRPB_RDPC register. To fix reporting we will store the dropped counts in the PF's rx_discards. This will be reported to netlink by storing it in the PF VSI's rx_missed_errors signaling that the receiver missed the packet. Also, we will report this to ethtool in the rx_dropped.nic field. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-07-31ice: Update number of VF queue before setting VSI resourcesAkeem G Abodunrin1-5/+5
In case there is a request from a VF to change its number of queues, and the request was successful, we need to update number of queues configured on the VF before updating corresponding VSI for that VF, especially LAN Tx queue tree and TC update, otherwise, we would continued to use old value of vf->num_vf_qs for allocated Tx/Rx queues... Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-07-31ice: Set up Tx scheduling tree based on alloc VSI Tx queuesAkeem G Abodunrin1-3/+3
This patch uses allocated number of Tx queues per VSI to set up its scheduling tree instead of using total number of available Tx queues. Only PF VSIs have total number of allocated Tx queues equal to number of available Tx queues, other VSIs have different number of queues configured. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-07-31ice: Only bump Rx tail and release buffers once per napi_pollBrett Creeley1-15/+27
Currently we bump the Rx tail and release/give buffers to hardware every 16 descriptors. This causes us to bump Rx tail up to 4 times per napi_poll call. Also we are always bumping tail on an odd index and this is a problem because hardware ignores the lower 3 bits in the QRX_TAIL register. This is making it so hardware sees tail bumps only every 8 descriptors. Instead lets only bump Rx tail once per napi_poll if the value aligns with hardware's expectations of the lower 3 bits being cleared. Also only release/give Rx buffers once per napi_poll call. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-07-31ice: Disable VFs until reset is completedAkeem G Abodunrin1-0/+5
This patch adds code to clear VFs enable status until reset is completed, and Tx/Rx rings are setup. Without this patch, the code flow request Tx queues to be disabled after reset, especially PFR - where VF VSI Tx rings have already been wiped off in the NVM and result to adminq error based on the call to disable Tx LAN queue in ice_reset_all_vfs function call. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-07-31ice: Do not configure port with no mediaTony Nguyen2-82/+158
The firmware reports an error when trying to configure a port with no media. Instead of always configuring the port, check for media before attempting to configure it. In the absence of media, turn off link and poll for media to become available before re-enabling link. Move ice_force_phys_link_state() up to avoid forward declaration. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-07-31ice: separate out control queue lock creationJacob Keller3-29/+91
The ice_init_all_ctrlq and ice_shutdown_all_ctrlq functions create and destroy the locks used to protect the send and receive process of each control queue. This is problematic, as the driver may use these functions to shutdown and re-initialize the control queues at run time. For example, it may do this in response to a device reset. If the driver failed to recover from a reset, it might leave the control queues offline. In this case, the locks will no longer be initialized. A later call to ice_sq_send_cmd will then attempt to acquire a lock that has been destroyed. It is incorrect behavior to access a lock that has been destroyed. Indeed, ice_aq_send_cmd already tries to avoid accessing an offline control queue, but the check occurs inside the lock. The root of the problem is that the locks are destroyed at run time. Modify ice_init_all_ctrlq and ice_shutdown_all_ctrlq such that they no longer create or destroy the locks. Introduce new functions, ice_create_all_ctrlq and ice_destroy_all_ctrlq. Call these functions in ice_init_hw and ice_deinit_hw. Now, the control queue locks will remain valid for the life of the driver, and will not be destroyed until the driver unloads. This also allows removing a duplicate check of the sq.count and rq.count values when shutting down the controlqs. The ice_shutdown_ctrlq function already checks this value under the lock. Previously commit dec64ff10ed9 ("ice: use [sr]q.count when checking if queue is initialized") needed this check to happen outside the lock, because it prevented duplicate attempts at destroying the locks. The driver may now safely use ice_init_all_ctrlq and ice_shutdown_all_ctrlq while handling reset events, without causing the locks to be invalid. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-07-31ice: Always set prefena when configuring an Rx queueBrett Creeley2-1/+9
Currently we are always setting prefena to 0. This is causing the hardware to only fetch descriptors when there are none free in the cache for a received packet instead of prefetching when it has used the last descriptor regardless of incoming packets. Fix this by allowing the hardware to prefetch Rx descriptors. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-07-31ice: Move vector base setup to PF VSITony Nguyen1-4/+4
When interrupt tracking was refactored, during rebuild, the call to ice_vsi_setup_vector_base() was inadvertently removed from the PF VSI instead of being removed from the VF VSI. During reset, the failure to properly setup the vector base generates a call trace. Correct this so that resets/rebuilds properly complete. Fixes: cbe66bfee6a0 ("ice: Refactor interrupt tracking") Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-07-31ice: track hardware stat registers past rolloverJacob Keller5-130/+91
Currently, ice_stat_update32 and ice_stat_update40 will limit the value of the software statistic to 32 or 40 bits wide, depending on which register is being read. This means that if a driver is running for a long time, the displayed software register values will roll over to zero at 40 bits or 32 bits. This occurs because the functions directly assign the difference between the previous value and current value of the hardware statistic. Instead, add this value to the current software statistic, and then update the previous value. In this way, each time ice_stat_update40 or ice_stat_update32 are called, they will increment the software tracking value by the difference of the hardware register from its last read. The software tracking value will correctly count up until it overflows a u64. The only requirement is that the ice_stat_update functions be called at least once each time the hardware register overflows. While we're fixing ice_stat_update40, modify it to use rd64 instead of two calls to rd32. Additionally, drop the now unnecessary hireg function parameter. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-07-31ice: add lp_advertising flow control supportPaul Greenwalt1-32/+72
Add support for reporting link partner advertising when ETHTOOL_GLINKSETTINGS defined. Get pause param reports the Tx/Rx pause configured, and then ethtool issues ETHTOOL_GSET ioctl and ice_get_settings_link_up reports the negotiated Tx/Rx pause. Negotiated pause frame report per IEEE 802.3-2005 table 288-3. $ ethtool --show-pause ens6f0 Pause parameters for ens6f0: Autonegotiate: on RX: on TX: on RX negotiated: on TX negotiated: on $ ethtool ens6f0 Settings for ens6f0: Supported ports: [ FIBRE ] Supported link modes: 25000baseCR/Full Supported pause frame use: Symmetric Supports auto-negotiation: Yes Supported FEC modes: None BaseR RS Advertised link modes: 25000baseCR/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Advertised FEC modes: None BaseR RS Link partner advertised link modes: Not reported Link partner advertised pause frame use: Symmetric Link partner advertised auto-negotiation: Yes Link partner advertised FEC modes: Not reported Speed: 25000Mb/s Duplex: Full Port: Direct Attach Copper PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: g Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes When ETHTOOL_GLINKSETTINGS is not defined, get pause param reports the negotiated Tx/Rx pause. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-07-31staging/octeon: Fix build error without CONFIG_NETDEVICESYueHaibing1-1/+2
While do COMPILE_TEST build without CONFIG_NETDEVICES, we get Kconfig warning: WARNING: unmet direct dependencies detected for PHYLIB Depends on [n]: NETDEVICES [=n] Selected by [y]: - OCTEON_ETHERNET [=y] && STAGING [=y] && (CAVIUM_OCTEON_SOC && NETDEVICES [=n] || COMPILE_TEST [=y]) Reported-by: Hulk Robot <hulkci@huawei.com> Reported-by: Mark Brown <broonie@kernel.org> Fixes: 171a9bae68c7 ("staging/octeon: Allow test build on !MIPS") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31Merge tag 'mac80211-next-for-davem-2019-07-31' of ↵David S. Miller40-374/+1070
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== We have a reasonably large number of changes: * lots more HE (802.11ax) support, particularly things relevant for the the AP side, but also mesh support * debugfs cleanups from Greg * some more work on extended key ID * start using genl parallel_ops, as preparation for weaning ourselves off RTNL and getting parallelism * various other changes all over ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31Merge branch 'mlxsw-Test-coverage-for-DSCP-leftover-fix'David S. Miller2-4/+26
Petr Machata says: ==================== mlxsw: Test coverage for DSCP leftover fix This patch set fixes some global scope pollution issues in the DSCP tests (in patch #1), and then proceeds (in patch #2) to add a new test for checking whether, after DSCP prioritization rules are removed from a port, DSCP rewrites consistently to zero, instead of the last removed rule still staying in effect. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31selftests: mlxsw: Add a test for leftover DSCP rulePetr Machata1-0/+19
Commit dedfde2fe1c4 ("mlxsw: spectrum_dcb: Configure DSCP map as the last rule is removed") fixed a problem in mlxsw where last DSCP rule to be removed remained in effect when DSCP rewrite was applied. Add a selftest that covers this problem. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31selftests: mlxsw: Fix local variable declarations in DSCP testsPetr Machata2-4/+7
These two tests have some problems in the global scope pollution and on contrary, contain unnecessary local declarations. Fix them. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31myri10ge: remove unneeded variableDing Xiang1-2/+1
"error" is unneeded,just return 0 Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31net: ag71xx: Slighly simplify code in 'ag71xx_rings_init()'Christophe JAILLET1-1/+1
A few lines above, we have: tx_size = BIT(tx->order); So use 'tx_size' directly to be consistent with the way 'rx->descs_cpu' and 'rx->descs_dma' are computed below. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31mac80211: HE STA disassoc due to QOS NULL not sentShay Bar1-1/+4
In case of HE AP-STA link, ieee80211_send_nullfunc() will not send the QOS NULL packet to check if AP is still associated. In this case, probe_send_count will be non-zero and ieee80211_sta_work() will later disassociate the AP, even though no packet was ever sent. Fix this by decrementing probe_send_count and not calling ieee80211_send_nullfunc() in case of HE link, so that we still wait for some time for the AP beacon to reappear and don't disconnect right away. Signed-off-by: Shay Bar <shay.bar@celeno.com> Link: https://lore.kernel.org/r/20190703131848.22879-1-shay.bar@celeno.com [clarify commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-31mac80211: allow setting spatial reuse parameters from bss_confJohn Crispin5-1/+36
Store the OBSS PD parameters inside bss_conf when bringing up an AP and/or when a station connects to an AP. This allows the driver to configure the HW accordingly. Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20190730163701.18836-3-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-31nl80211: add strict start typeJohannes Berg1-0/+1
Add a strict start type so all new attributes starting from NL80211_ATTR_HE_OBSS_PD are validated strictly. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-31cfg80211: add support for parsing OBBS_PD attributesJohn Crispin3-0/+87
Add the data structure, policy and parsing code allowing userland to send the OBSS PD information into the kernel. Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20190730163701.18836-2-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-31mac80211: reject zero MAC address in add stationKarthikeyan Periyasamy1-1/+1
This came up in fuzz testing, and really we don't consider all-zeroes to be a valid MAC address in most places, so also reject it here to avoid confusion later on. Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Link: https://lore.kernel.org/r/1563959770-21570-1-git-send-email-periyasa@codeaurora.org [rewrite commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-31cfg80211: use parallel_ops for genlJohannes Berg1-30/+78
Over time, we really need to get rid of all of our global locking. One of the things needed is to use parallel_ops. This isn't really the most important (RTNL is much more important) but OTOH we just keep adding uses of genl_family_attrbuf() now. Use .parallel_ops to disallow this. Reviewed-By: Denis Kenzior <denkenz@gmail.com> Link: https://lore.kernel.org/r/20190729143109.18683-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-31mac80211_hwsim: fill boottime_ns in netlink RX pathJohannes Berg1-0/+7
Give a proper boottime_ns value for netlink RX to avoid scan issues here. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20190729160605.1074-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-31mac80211: add missing null return check from call to ieee80211_get_sbandColin Ian King1-0/+2
The return from ieee80211_get_sband can potentially be a null pointer, so it seems prudent to add a null check to avoid a null pointer dereference on sband. Addresses-Coverity: ("Dereference null return") Fixes: 2ab45876756f ("mac80211: add support for the ADDBA extension element") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20190730143205.14261-1-colin.king@canonical.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-31Merge branch 'net-dsa-ksz-Add-Microchip-KSZ87xx-support'David S. Miller11-1/+2536
Marek Vasut says: ==================== net: dsa: ksz: Add Microchip KSZ87xx support This series adds support for Microchip KSZ87xx switches, which are slightly simpler compared to KSZ9xxx . ==================== Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31net: dsa: ksz: Add Microchip KSZ8795 DSA driverTristram Ha8-1/+2469
Add Microchip KSZ8795 DSA driver. Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31net: dsa: ksz: Add KSZ8795 tag codeTristram Ha2-0/+64
Add DSA tag code for Microchip KSZ8795 switch. The switch is simpler and the tag is only 1 byte, instead of 2 as is the case with KSZ9477. Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31dt-bindings: net: dsa: ksz: document Microchip KSZ87xx family switchesMarek Vasut1-0/+3
Document Microchip KSZ87xx family switches. These include KSZ8765 - 5 port switch KSZ8794 - 4 port switch KSZ8795 - 5 port switch Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Woojung Huh <woojung.huh@microchip.com> Cc: devicetree@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31Merge branch 'vsock-virtio-optimizations-to-increase-the-throughput'David S. Miller4-38/+134
Stefano Garzarella says: ==================== vsock/virtio: optimizations to increase the throughput This series tries to increase the throughput of virtio-vsock with slight changes. While I was testing the v2 of this series I discovered an huge use of memory, so I added patch 1 to mitigate this issue. I put it in this series in order to better track the performance trends. v5: - rebased all patches on net-next - added Stefan's R-b and Michael's A-b v4: https://patchwork.kernel.org/cover/11047717 v3: https://patchwork.kernel.org/cover/10970145 v2: https://patchwork.kernel.org/cover/10938743 v1: https://patchwork.kernel.org/cover/10885431 Below are the benchmarks step by step. I used iperf3 [1] modified with VSOCK support. As Michael suggested in the v1, I booted host and guest with 'nosmap'. A brief description of patches: - Patches 1: limit the memory usage with an extra copy for small packets - Patches 2+3: reduce the number of credit update messages sent to the transmitter - Patches 4+5: allow the host to split packets on multiple buffers and use VIRTIO_VSOCK_MAX_PKT_BUF_SIZE as the max packet size allowed host -> guest [Gbps] pkt_size before opt p 1 p 2+3 p 4+5 32 0.032 0.030 0.048 0.051 64 0.061 0.059 0.108 0.117 128 0.122 0.112 0.227 0.234 256 0.244 0.241 0.418 0.415 512 0.459 0.466 0.847 0.865 1K 0.927 0.919 1.657 1.641 2K 1.884 1.813 3.262 3.269 4K 3.378 3.326 6.044 6.195 8K 5.637 5.676 10.141 11.287 16K 8.250 8.402 15.976 16.736 32K 13.327 13.204 19.013 20.515 64K 21.241 21.341 20.973 21.879 128K 21.851 22.354 21.816 23.203 256K 21.408 21.693 21.846 24.088 512K 21.600 21.899 21.921 24.106 guest -> host [Gbps] pkt_size before opt p 1 p 2+3 p 4+5 32 0.045 0.046 0.057 0.057 64 0.089 0.091 0.103 0.104 128 0.170 0.179 0.192 0.200 256 0.364 0.351 0.361 0.379 512 0.709 0.699 0.731 0.790 1K 1.399 1.407 1.395 1.427 2K 2.670 2.684 2.745 2.835 4K 5.171 5.199 5.305 5.451 8K 8.442 8.500 10.083 9.941 16K 12.305 12.259 13.519 15.385 32K 11.418 11.150 11.988 24.680 64K 10.778 10.659 11.589 35.273 128K 10.421 10.339 10.939 40.338 256K 10.300 9.719 10.508 36.562 512K 9.833 9.808 10.612 35.979 As Stefan suggested in the v1, I measured also the efficiency in this way: efficiency = Mbps / (%CPU_Host + %CPU_Guest) The '%CPU_Guest' is taken inside the VM. I know that it is not the best way, but it's provided for free from iperf3 and could be an indication. host -> guest efficiency [Mbps / (%CPU_Host + %CPU_Guest)] pkt_size before opt p 1 p 2+3 p 4+5 32 0.35 0.45 0.79 1.02 64 0.56 0.80 1.41 1.54 128 1.11 1.52 3.03 3.12 256 2.20 2.16 5.44 5.58 512 4.17 4.18 10.96 11.46 1K 8.30 8.26 20.99 20.89 2K 16.82 16.31 39.76 39.73 4K 30.89 30.79 74.07 75.73 8K 53.74 54.49 124.24 148.91 16K 80.68 83.63 200.21 232.79 32K 132.27 132.52 260.81 357.07 64K 229.82 230.40 300.19 444.18 128K 332.60 329.78 331.51 492.28 256K 331.06 337.22 339.59 511.59 512K 335.58 328.50 331.56 504.56 guest -> host efficiency [Mbps / (%CPU_Host + %CPU_Guest)] pkt_size before opt p 1 p 2+3 p 4+5 32 0.43 0.43 0.53 0.56 64 0.85 0.86 1.04 1.10 128 1.63 1.71 2.07 2.13 256 3.48 3.35 4.02 4.22 512 6.80 6.67 7.97 8.63 1K 13.32 13.31 15.72 15.94 2K 25.79 25.92 30.84 30.98 4K 50.37 50.48 58.79 59.69 8K 95.90 96.15 107.04 110.33 16K 145.80 145.43 143.97 174.70 32K 147.06 144.74 146.02 282.48 64K 145.25 143.99 141.62 406.40 128K 149.34 146.96 147.49 489.34 256K 156.35 149.81 152.21 536.37 512K 151.65 150.74 151.52 519.93 [1] https://github.com/stefano-garzarella/iperf/ ==================== Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31vsock/virtio: change the maximum packet size allowedStefano Garzarella1-2/+2
Since now we are able to split packets, we can avoid limiting their sizes to VIRTIO_VSOCK_DEFAULT_RX_BUF_SIZE. Instead, we can use VIRTIO_VSOCK_MAX_PKT_BUF_SIZE as the max packet size. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31vhost/vsock: split packets to send using multiple buffersStefano Garzarella2-21/+60
If the packets to sent to the guest are bigger than the buffer available, we can split them, using multiple buffers and fixing the length in the packet header. This is safe since virtio-vsock supports only stream sockets. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31vsock/virtio: fix locking in virtio_transport_inc_tx_pkt()Stefano Garzarella2-3/+3
fwd_cnt and last_fwd_cnt are protected by rx_lock, so we should use the same spinlock also if we are in the TX path. Move also buf_alloc under the same lock. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31vsock/virtio: reduce credit update messagesStefano Garzarella2-3/+14
In order to reduce the number of credit update messages, we send them only when the space available seen by the transmitter is less than VIRTIO_VSOCK_MAX_PKT_BUF_SIZE. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31vsock/virtio: limit the memory used per-socketStefano Garzarella4-9/+55
Since virtio-vsock was introduced, the buffers filled by the host and pushed to the guest using the vring, are directly queued in a per-socket list. These buffers are preallocated by the guest with a fixed size (4 KB). The maximum amount of memory used by each socket should be controlled by the credit mechanism. The default credit available per-socket is 256 KB, but if we use only 1 byte per packet, the guest can queue up to 262144 of 4 KB buffers, using up to 1 GB of memory per-socket. In addition, the guest will continue to fill the vring with new 4 KB free buffers to avoid starvation of other sockets. This patch mitigates this issue copying the payload of small packets (< 128 bytes) into the buffer of last packet queued, in order to avoid wasting memory. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31net: Remove dev_err() usage after platform_get_irq()Stephen Boyd20-68/+15
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: "David S. Miller" <davem@davemloft.net> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Felix Fietkau <nbd@nbd.name> Cc: Lorenzo Bianconi <lorenzo@kernel.org> Cc: netdev@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31Merge branch 'Finish-conversion-of-skb_frag_t-to-bio_vec'David S. Miller46-111/+161
Jonathan Lemon says: ==================== Finish conversion of skb_frag_t to bio_vec The recent conversion of skb_frag_t to bio_vec did not include skb_frag's page_offset. Add accessor functions for this field, utilize them, and remove the union, restoring the original structure. v2: - rename accessors - follow kdoc conventions ==================== Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31linux: Remove bvec page_offset, use bv_offsetJonathan Lemon2-9/+6
Now that page_offset is referenced through accessors, remove the union, and use bv_offset. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31net: Use skb_frag_off accessorsJonathan Lemon44-98/+100
Use accessor functions for skb fragment's page_offset instead of direct references, in preparation for bvec conversion. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31linux: Add skb_frag_t page_offset accessorsJonathan Lemon1-8/+59
Add skb_frag_off(), skb_frag_off_add(), skb_frag_off_set(), and skb_frag_off_copy() accessors for page_offset. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31Merge branch 'sctp-clean-up-sctp_connect-function'David S. Miller2-231/+147
Xin Long says: ==================== sctp: clean up __sctp_connect function This patchset is to factor out some common code for sctp_sendmsg_new_asoc() and __sctp_connect() into 2 new functioins. v1->v2: - add the patch 1/5 to avoid a slab-out-of-bounds warning. - add some code comment for the check change in patch 2/5. - remove unused 'addrcnt' as Marcelo noticed in patch 3/5. ==================== Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31sctp: factor out sctp_connect_add_peerXin Long1-45/+31
In this function factored out from sctp_sendmsg_new_asoc() and __sctp_connect(), it adds a peer with the other addr into the asoc after this asoc is created with the 1st addr. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31sctp: factor out sctp_connect_new_asocXin Long1-84/+76
In this function factored out from sctp_sendmsg_new_asoc() and __sctp_connect(), it creates the asoc and adds a peer with the 1st addr. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31sctp: clean up __sctp_connectXin Long1-136/+73
__sctp_connect is doing quit similar things as sctp_sendmsg_new_asoc. To factor out common functions, this patch is to clean up their code to make them look more similar: 1. create the asoc and add a peer with the 1st addr. 2. add peers with the other addrs into this asoc one by one. while at it, also remove the unused 'addrcnt'. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31sctp: check addr_size with sa_family_t size in __sctp_setsockopt_connectxXin Long1-1/+2
Now __sctp_connect() is called by __sctp_setsockopt_connectx() and sctp_inet_connect(), the latter has done addr_size check with size of sa_family_t. In the next patch to clean up __sctp_connect(), we will remove addr_size check with size of sa_family_t from __sctp_connect() for the 1st address. So before doing that, __sctp_setsockopt_connectx() should do this check first, as sctp_inet_connect() does. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31sctp: only copy the available addr data in sctp_transport_initXin Long1-1/+1
'addr' passed to sctp_transport_init is not always a whole size of union sctp_addr, like the path: sctp_sendmsg() -> sctp_sendmsg_new_asoc() -> sctp_assoc_add_peer() -> sctp_transport_new() -> sctp_transport_init() In the next patches, we will also pass the address length of data only to sctp_assoc_add_peer(). So sctp_transport_init() should copy the only available data from addr to peer->ipaddr, instead of 'peer->ipaddr = *addr' which may cause slab-out-of-bounds. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30rxrpc: Fix -Wframe-larger-than= warnings from on-stack cryptoDavid Howells4-20/+96
rxkad sometimes triggers a warning about oversized stack frames when building with clang for a 32-bit architecture: net/rxrpc/rxkad.c:243:12: error: stack frame size of 1088 bytes in function 'rxkad_secure_packet' [-Werror,-Wframe-larger-than=] net/rxrpc/rxkad.c:501:12: error: stack frame size of 1088 bytes in function 'rxkad_verify_packet' [-Werror,-Wframe-larger-than=] The problem is the combination of SYNC_SKCIPHER_REQUEST_ON_STACK() in rxkad_verify_packet()/rxkad_secure_packet() with the relatively large scatterlist in rxkad_verify_packet_1()/rxkad_secure_packet_encrypt(). The warning does not show up when using gcc, which does not inline the functions as aggressively, but the problem is still the same. Allocate the cipher buffers from the slab instead, caching the allocated packet crypto request memory used for DATA packet crypto in the rxrpc_call struct. Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 02:21:17 +0300