| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
One new boards, the CoolPi CM5 SoM and 4B SBC. Basic node for the rk3588
display controller and a bunch of small improvements for different boards,
* tag 'v6.8-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (21 commits)
arm64: dts: rockchip: Fix led pinctrl of lubancat 1
arm64: dts: rockchip: correct gpio_pwrctrl1 typo on nanopc-t6
arm64: dts: rockchip: correct gpio_pwrctrl1 typo on rock-5b
arm64: dts: rockchip: support poweroff on the rock-5b
arm64: dts: rockchip: Support poweroff on Orange Pi 5
arm64: dts: rockchip: nanopc-t6 sdmmc beautification
arm64: dts: rockchip: Fix rk3588 USB power-domain clocks
arm64: dts: rockchip: configure eth pad driver strength for orangepi r1 plus lts
arm64: dts: rockchip: Support poweroff on NanoPC-T6
arm64: dts: rockchip: rk3308-rock-pi-s gpio-line-names cleanup
arm64: dts: rockchip: Add support for rk3588 based board Cool Pi CM5 EVB
dt-bindings: arm: rockchip: Add Cool Pi CM5
arm64: dts: rockchip: Add support for rk3588s based board Cool Pi 4B
dt-bindings: arm: rockchip: Add Cool Pi 4B
dt-bindings: vendor-prefixes: Add Cool Pi
arm64: dts: rockchip: add gpio-line-names to rk3328-rock-pi-e
arm64: dts: rockchip: make use gpio-keys for buttons on puma-haikou
arm64: dts: rockchip: expose BIOS Disable feedback pin on rk3399-puma
arm64: dts: rockchip: fix misleading comment in rk3399-puma-haikou.dts
arm64: dts: rockchip: Add vop on rk3588
...
Link: https://lore.kernel.org/r/3711719.VqM8IeB0Os@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
A few more Qualcomm Arm64 DeviceTree updates for v6.8
This corrects the rate of the UTMI clock on IPQ6018 USB0. The SDHCI
controller on SC7280 gains missing markings for being cache-coherent.
For SC8180X a typo in assignment of PCIe refgen clocks is corrected, PCI
controllers are marked cache-coherent, and the USB SS PHY interrupts are
corrected to allow wakeup.
Similarly USB HS PHY and SS PHY interrupts are corrected to allow
wakeup on SDM670.
On SM8550 the X3 cluster idle state is properly described, and the
latency numbers are adjusted for all the idle states.
The PM8550 regulator supplies on X1E are corrected to match the driver
and binding, and the timer node is updated to avoid an unnecessary
validation error.
* tag 'qcom-arm64-for-6.8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sc8180x: Fix up PCIe nodes
arm64: dts: qcom: sc8180x: Mark PCIe hosts cache-coherent
arm64: dts: qcom: x1e80100-qcp: Fix supplies for some LDOs in PM8550
arm64: dts: qcom: sm8550: Update idle state time requirements
arm64: dts: qcom: sm8550: Separate out X3 idle state
arm64: dts: qcom: ipq6018: fix clock rates for GCC_USB0_MOCK_UTMI_CLK
arm64: dts: qcom: x1e80100: align mem timer size cells with bindings
arm64: dts: qcom: sc7280: Mark SDHCI hosts as cache-coherent
arm64: dts: qcom: sc8180x: fix USB SS wakeup
arm64: dts: qcom: sdm670: fix USB SS wakeup
arm64: dts: qcom: sdm670: fix USB DP/DM HS PHY interrupts
Link: https://lore.kernel.org/r/20231231034108.3262678-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
A few more Qualcomm Arm32 DeviceTree updates fr v6.8
The recently introduced changes to the SDX55 USB controller interrupt
flags prevents the USB controller from probing. These patches corrects
the PDC's interrupt-cells, so that appropriate interrupt controller
(which supports both-edge interrupts) can be used instead, which
resolves the issue.
The SDX55 PCIe PHY base address is also adjusted, from a mistake when
the node recently was transitioned to the modernized DeviceTree binding.
* tag 'qcom-arm32-for-6.8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: sdx55: Fix the base address of PCIe PHY
ARM: dts: qcom: sdx55: fix USB SS wakeup
ARM: dts: qcom: sdx55: fix USB DP/DM HS PHY interrupts
ARM: dts: qcom: sdx55: fix pdc '#interrupt-cells'
Link: https://lore.kernel.org/r/20231231033153.3262575-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 6.8, please pull the following:
- Rafal adds a Device Tree node for the BCM63138 high-speed UART used
for Bluetooth devices
* tag 'arm-soc/for-6.8/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: broadcom: Add BCM63138's high speed UART
Link: https://lore.kernel.org/r/20231228085822.3656546-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
ARM: sprd: DTS and bindings for v6.8-rc1
Unisoc ARM64 DTS and bindings changes are:
- Fixed a few dtb_check warnings
- Add bindings for a new SoC - UMS9620
- Fixed an issue on UMS512
* tag 'sprd-dt-6.8-rc1' of https://github.com/lyrazhang/linux:
arm64: dts: sprd: Change UMS512 idle-state nodename to match bindings
arm64: dts: sprd: Add clock reference for pll2 on UMS512
arm64: dts: sprd: Removed unused clock references from etm nodes
arm64: dts: sprd: Add support for Unisoc's UMS9620
dt-bindings: arm: Add compatible strings for Unisoc's UMS9620
arm64: dts: sprd: fix the cpu node for UMS512
Link: https://lore.kernel.org/r/20231228084958.1439115-1-chunyan.zhang@unisoc.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
According to the schematics, the gpio control sys_led is GPIO0_C5.
Fixes: 8d94da58de53 ("arm64: dts: rockchip: Add EmbedFire LubanCat 1")
Reported-by: Zhang Ning <zhangn1985@outlook.com>
Closes: https://lore.kernel.org/linux-rockchip/OS0P286MB06412D049D8BF7B063D41350CD95A@OS0P286MB0641.JPNP286.PROD.OUTLOOK.COM/T/#u
Signed-off-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20231225005055.3102743-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Both rk806_dvs1_null and rk806_dvs2_null duplicate gpio_pwrctrl2 and
gpio_pwrctrl1 is not set. This patch sets gpio_pwrctrl1.
Signed-off-by: John Clark <inindev@gmail.com>
Link: https://lore.kernel.org/r/20231225223226.17690-1-inindev@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Both rk806_dvs1_null and rk806_dvs2_null duplicate gpio_pwrctrl2 and
gpio_pwrctrl1 is not set. This patch sets gpio_pwrctrl1.
Signed-off-by: John Clark <inindev@gmail.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20231225222859.17153-2-inindev@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Allow the rock-5b to poweroff its pmic. When issuing a "shutdown -h now"
on the rock-5b it reboots instead. Defining 'system-power-controller'
allows the rk806 to power down.
Commit c699fbfdfd54 ("arm64: dts: rockchip: Support poweroff on
NanoPC-T6") similarly resolves this issue for the nanopc-t6.
Signed-off-by: John Clark <inindev@gmail.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20231225222859.17153-1-inindev@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The RK806 on the Orange Pi 5 can be used to power on/off the whole board.
Mark it as the system power controller.
Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Link: https://lore.kernel.org/r/20231227203211.1047-1-honyuenkwun@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
drop max-frequency = <200000000> as it is already defined in rk3588s.dtsi
order no-sdio & no-mmc properties while we are here
Signed-off-by: John Clark <inindev@gmail.com>
Link: https://lore.kernel.org/r/20231228173011.2863-1-inindev@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Fix below dtbs_check warning:
idle-states: 'core-pd' does not match any of the regexes: '^(cpu|cluster)-', 'pinctrl-[0-9]+'
Link: https://lore.kernel.org/r/20231221092824.1169453-3-chunyan.zhang@unisoc.com
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
|
|
Fix below dtbs_check warning:
'clocks' is a dependency of 'clock-names'
Link: https://lore.kernel.org/r/20231221092824.1169453-2-chunyan.zhang@unisoc.com
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
|
|
Remove these unused clock references to fix dtbs_check warnings:
etm@3f740000: clocks: [[11], [35, 34], [36, 8]] is too long
etm@3f740000: clock-names:1: 'atclk' was expected
etm@3f740000: clock-names: ['apb_pclk', 'clk_cs', 'cs_src'] is too long
Link: https://lore.kernel.org/r/20231221092824.1169453-1-chunyan.zhang@unisoc.com
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
|
|
Add basic support for Unisoc's UMS9620, with this patch,
the board ums9620-2h10 can run into console.
Link: https://lore.kernel.org/r/20231218100234.1102916-4-chunyan.zhang@unisoc.com
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
|
|
Added bindings for Unisoc's UMS9620-2H10 board and UMS9620 SoC.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231218100234.1102916-3-chunyan.zhang@unisoc.com
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
|
|
The UMS512 Socs have 8 cores contains 6 a55 and 2 a75.
modify the cpu nodes to correct information.
Fixes: 2b4881839a39 ("arm64: dts: sprd: Add support for Unisoc's UMS512")
Cc: stable@vger.kernel.org
Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com>
Link: https://lore.kernel.org/r/20230711162346.5978-1-cixi.geng@linux.dev
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
|
|
The QoS blocks saved/restored when toggling the PD_USB power domain are
clocked by ACLK_USB. Attempting to access these memory regions without
that clock running will result in an indefinite CPU stall.
The PD_USB node wasn't specifying this clock dependency, resulting in
hangs when trying to toggle the power domain (either on or off), unless
we get "lucky" and have ACLK_USB running for another reason at the time.
This "luck" can result from the bootloader leaving USB powered/clocked,
and if no built-in driver wants USB, Linux will disable the unused
PD+CLK on boot when {pd,clk}_ignore_unused aren't given. This can also
be unlucky because the two cleanup tasks run in parallel and race: if
the CLK is disabled first, the PD deactivation stalls the boot. In any
case, the PD cannot then be reenabled (if e.g. the driver loads later)
once the clock has been stopped.
Fix this by specifying a dependency on ACLK_USB, instead of only
ACLK_USB_ROOT. The child-parent relationship means the former implies
the latter anyway.
Fixes: c9211fa2602b8 ("arm64: dts: rockchip: Add base DT for rk3588 SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Link: https://lore.kernel.org/r/20231216021019.1543811-1-CFSworks@gmail.com
[changed to only include the missing clock, not dropping the root-clocks]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The default strength is not enough to provide stable connection
under 3.3v LDO voltage.
Fixes: 387b3bbac5ea ("arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS")
Cc: stable@vger.kernel.org # 6.6+
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Link: https://lore.kernel.org/r/20231216040723.17864-1-cnsztl@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The RK806 on the NanoPC-T6 can be used to power on/off the whole board.
Mark it as the system power controller.
Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com>
Link: https://lore.kernel.org/r/20231216212134.23314-1-sigmaris@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Perform the following cleanups on a previous patch:
- indent lines after "gpio-line-names"
- fix D0-D8 -> D0-D7
- sort phandle references
Fixes: c45de75d7a9a ("arm64: dts: rockchip: add gpio-line-names to rk3308-rock-pi-s")
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Link: https://lore.kernel.org/r/20231219173814.1569-1-twoerner@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Cool Pi CM5 EVB works as a mother board connect with CM5.
CM5 Specification:
- Rockchip RK3588
- LPDDR4 2/4/8/16 GB
- TF scard slot
- eMMC 8/32/64/128 GB module
- Gigabit ethernet x 1 with PHY YT8531
- Gigabit ethernet x 1 drived by PCIE with YT6801S
CM5 EVB Specification:
- HDMI Type A out x 2
- HDMI Type D in x 1
- USB 2.0 Host x 2
- USB 3.0 OTG x 1
- USB 3.0 Host x 1
- PCIE M.2 E Key for Wireless connection
- PCIE M.2 M Key for NVME connection
- 40 pin header
Signed-off-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20231212124407.1897604-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add Cool Pi CM5, a board powered by RK3588
CM5 EVB works with a mother board connect with
CM5
Signed-off-by: Andy Yan <andyshrk@163.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231212124340.1897502-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
CoolPi 4B is a rk3588s based SBC.
Specification:
- Rockchip RK3588S
- LPDDR4 2/4/8/16 GB
- TF scard slot
- eMMC 8/32/64/128 GB module
- Gigabit ethernet drived by PCIE with RTL8111HS
- HDMI Type D out
- Mini DP out
- USB 2.0 Host x 2
- USB 3.0 OTG x 1
- USB 3.0 Host x 1
- WIFI/BT module AIC8800
- 40 pin header
Signed-off-by: Andy Yan <andyshrk@163.com>
arm64: dts: rockchip: Add support for rk3588s based board Cool Pi 4B
Link: https://lore.kernel.org/r/20231212124253.1897438-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add Cool Pi 4B, a SBC powered by RK3588S
Signed-off-by: Andy Yan <andyshrk@163.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231212124237.1897378-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add vendor prefix for Cool Pi(https://cool-pi.com/)
Signed-off-by: Andy Yan <andyshrk@163.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231212124223.1897314-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add names to the pins of the general-purpose expansion header as given
in the Radxa GPIO page[1] following the conventions in the kernel
documentation[2] to make it easier for users to correlate the pins with
functions when using utilities such as 'gpioinfo'.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Link: https://lore.kernel.org/r/20231213160556.14424-1-twoerner@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 updates for v6.8
Support is added for the new Snapdragon 8 Gen 3 mobile platform, with
support for the MTP and QRD development devices, the new Snapdragon X
Elite compute platform with QCP and CRD development/references devices,
the QCS6590/QCM6490 platform with support for the IDP development device
and the Robotics RB3gen2 board, the Huawei Honor 5X/GR5 handset
built on MSM8939, and Xiaomi Pad 6 on SM8250.
On IPQ5018 and IPQ6018 platform support for CPUfreq, USB, and one
additional QUP SPI controller is added.
CPU OPP tables are selectively enabled based on fuses, for both IPQ5332
and IPQ6018. IPQ6018 gains description of a few more SPI and UART nodes.
Common elements of the IPQ9574 RDP boards are refactored into a common
include file. IPQ9574 also gains description of its LEDs and WPS
busttons.
MSM8916 finally gets the DSP-based audio described, and this is enabled
for a variety of boards. Acer Iconia Talk S and Loncheer L8910 gains
notification LED, battery and charger support is added to Loncheer
L8150, and GPU is enabled for Samsung Galaxy Tab A.
Similariy DSP-based audio is added on MSM8939, the BAM-DMUX support is
enabled as well. The Longcheer L9100 gains RGB notification LED support,
and the wireless subsystem is enabled.
Missing SPI controllers are described on MSM8953. On MSM8996 the MPM is
enabled, to allow using wakeup interrupts. Interconnect providers, MPM
and display are added to QCM2290.
UFS, remoteprocs and WiFi is enabled for Fairphone FP5.
On Fairphone FP3 audio, WiFi and Bluetooth are enabled.
On the Robotics RB1, HDMI and the CAN bus controller are added. On
Robotics RB2 Bluetooth, the modem remoteproc and WiFi are enabled.
Bluetooth is enabled on the Robotics RB5.
On SA8775P tsens and thermal is added, as well as the random number
generator.
Sound and RTC support is added for the Acer Aspire 1.
On SC7280 DeviceTree is refactored, in order to allow non-Chrome devices
to inherit the base dtsi. Support for UFS, crypto, TrustZone based
remoteprocs, the Camera Control Interface (CCI) and random number
generator support are added. Additionally a variety of smaller fixes are
introduced.
A variety of fixes are introduced for SC8180X, in particular missing
power-domains and interconnects.
On SC8280XP the camera clock controller is added, and a number of
smaller fixes are introduced.
The display subsystem in SDM670 is described.
On SDX75 interconnect providers are added, as is USB3 and the related
PHY, which is then enabled on the IDP device.
On SM6115 interconnect providers are added and existing clients are
wired up. A UART controller is added as well.
The MPM is added, to provide wakeup interrutps, on SM6375. The modem
subsystem, and WiFi are enabled on Sony Xperia 10 IV, a few regulator
supplies are corrected.
On SM8150 the DisplayPort controller is added, for USB Type-C output,
which together with the addition of HDMI is described on the HDK board.
GPU and random number generator support are added to SM8450, and enabled
on the HDK board.
On SM8550 GPU, IPA, random number generator, missing SoundWire ports are
added, and enabled on both MTP and QRD devices.
Additionally a large number of smaller functional and DeviceTree binding
validation issues are corrected across a variety of platforms.
* tag 'qcom-arm64-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (288 commits)
arm64: dts: qcom: sc8180x-primus: Allow UFS regulators load/mode setting
arm64: dts: qcom: sc8180x: Describe the GIC redistributor
arm64: dts: qcom: sc8180x: Add interconnects to UFS
arm64: dts: qcom: sc8180x: Add missing MDP clocks
arm64: dts: qcom: sc8180x: Add UFS GDSC
arm64: dts: qcom: sc7280*: move MPSS and WPSS memory to dtsi
arm64: dts: qcom: sc7280: Rename reserved-memory nodes
arm64: dts: qcom: sc7280: Remove unused second MPSS reg
arm64: dts: qcom: sdm670: add display subsystem
arm64: dts: qcom: sm8150-hdk: enable DisplayPort and USB-C altmode
arm64: dts: qcom: sm8150: add USB-C ports to the OTG USB host
arm64: dts: qcom: sm8150: add USB-C ports to the USB+DP QMP PHY
arm64: dts: qcom: sm8150: add DisplayPort controller
arm64: dts: qcom: sm8150-hdk: fix SS USB regulators
arm64: dts: qcom: sm8150-hdk: enable HDMI output
arm64: dts: qcom: sm8150: make dispcc cast minimal vote on MMCX
arm64: dts: qcom: sm8650: add fastrpc-compute-cb nodes
arm64: dts: qcom: sm8550-qrd: add PM8010 regulators
arm64: dts: qcom: sm8550-mtp: Add pm8010 regulators
arm64: dts: qcom: qcm2290: Hook up MPM
...
Link: https://lore.kernel.org/r/20231219145402.874161-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V Devicetrees for v6.8
StarFive:
Key peripheral support for the jh7100 that depended on the non-standard
non-coherent DMA operations, namely mmc, sdcard and sdio wifi. This
platform has long been supported out of tree by Emil and Ubuntu etc ship
images for it, so having mainline support for a wider range of
peripherals (at last) is great.
Microchip:
The flash used by Auto Update support and the corresponding QSPI
controller are added. On publicly available Icicle kits this flash is
not usable (engineering sample silicon issues) but in the future Icicle
kits will be available that have production silicon.
T-Head:
Jisheng is busy with RL this cycle and hence T-Head appears here. The
Lichee Pi and BeagleV both grow eMMC and uSD support.
Sopgho:
Support for the Huashan Pi and the cv1812h SoC it uses. The cv1812h is
almost identical to the existing cv1800b SoC. These SoCs are intended
for use in IP camera type systems but also appear on SBCs, with the last
digit denoting the amount integrated DDR3 the device has. The difference
between the cv1812h and the existing cv180x devices appears to be the
addition of video output interfaces.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: starfive: Enable SDIO wifi on JH7100 boards
riscv: dts: starfive: Enable SD-card on JH7100 boards
riscv: dts: starfive: Add JH7100 MMC nodes
riscv: dts: starfive: Add pool for coherent DMA memory on JH7100 boards
riscv: dts: starfive: Add JH7100 cache controller
riscv: dts: starfive: Mark the JH7100 as having non-coherent DMAs
riscv: dts: starfive: Group tuples in interrupt properties
riscv: dts: thead: Enable LicheePi 4A eMMC and microSD
riscv: dts: thead: Enable BeagleV Ahead eMMC and microSD
riscv: dts: thead: Add TH1520 mmc controllers and sdhci clock
riscv: dts: microchip: add the mpfs' system controller qspi & associated flash
riscv: dts: sophgo: add Huashan Pi board device tree
riscv: dts: sophgo: add initial CV1812H SoC device tree
riscv: dts: sophgo: cv18xx: Add gpio devices
riscv: dts: sophgo: Separate compatible specific for CV1800B soc
dt-bindings: riscv: Add SOPHGO Huashan Pi board compatibles
dt-bindings: timer: Add SOPHGO CV1812H clint
dt-bindings: interrupt-controller: Add SOPHGO CV1812H plic
Link: https://lore.kernel.org/r/20231221-skimmed-boxy-b78aed8afdc4@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM64 DT changes for v6.8:
- DT cleanups
- s4 uart node
- drop redundant status=okay
- minor whitespace cleanup around '='
- Watchdog nodes for S4 & C4 SoCs
- Clock, I2C, SPICC, NAND, Ethernet nodes for S4 And the AQ222 dev board
- Add EEPROM on the jethub-jxx boards
- Update of the amlogic,meson-gx-hhi-sysctrl bindings
* tag 'amlogic-arm64-dt-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: amlogic: fix format for s4 uart node
arm64: dts: amlogic: drop redundant status=okay
arm64: dts: amlogic: enable some nodes for board AQ222
arm64: dts: amlogic: add some device nodes for S4
arm64: dts: meson-axg: jethub-jxx add support for EEPROM
arm64: dts: amlogic: meson-axg: pinctrl node for NAND
arm64: dts: amlogic: minor whitespace cleanup around '='
arm64: dts: Add watchdog node for Amlogic S4 SoCs
arm64: dts: Add watchdog node for Amlogic C3 SoCs
dt-bindings: soc: amlogic,meson-gx-hhi-sysctrl: add example covering meson-axg-hhi-sysctrl
Link: https://lore.kernel.org/r/e38724be-c9f0-4916-bfd0-d20b316db2da@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
mvebu dt64 for 6.8 (part 1)
Add devices tree for CN9130 and CN9131 COM Express Boards
Fix device tree for Turris Mox and for switch nodes
* tag 'mvebu-dt64-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: cn913x: add device trees for COM Express boards
dt-bindings: arm64: add Marvell COM Express boards
MAINTAINERS: add ac5 to list of maintained Marvell dts files
arm64: dts: armada-3720-turris-mox: set irq type for RTC
ARM64: dts: Add special compatibles for the Turris Mox
ARM64: dts: marvell: Fix some common switch mistakes
Link: https://lore.kernel.org/r/87le9obypx.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
mvebu dt for 6.8 (part 1)
Fix dt for gpio and switch nodes
* tag 'mvebu-dt-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: marvell: make dts use gpio-fan matrix instead of array
ARM: dts: marvell: Fix some common switch mistakes
Link: https://lore.kernel.org/r/87o7ekbyv2.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.8, part two
1. Tesla FSD: Add Multi Format Codec (MFC) device nodes, for accelerated
video de/encoding.
2. Add initial Google Tensor GS101 SoC support. The GS101 SoC can be
found on Google Pixel 6 phones. Currently the DTS brings only basic
support: core clock controllers, pin controllers, serial, watchdog
and ARM core blocks.
* tag 'samsung-dt64-6.8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
MAINTAINERS: adjust file entry in GOOGLE TENSOR SoC SUPPORT
MAINTAINERS: add entry for Google Tensor SoC
arm64: dts: exynos: google: Add initial Oriole/pixel 6 board support
arm64: dts: exynos: google: Add initial Google gs101 SoC support
dt-bindings: arm: google: Add bindings for Google ARM platforms
arm64: dts: fsd: Add MFC related DT enteries
Link: https://lore.kernel.org/r/20231220084722.22149-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM32 DeviceTree updates for v6.8
Support is added for HTC One Mini 2, Nokia Lumia 630, Microsoft Lumia
640, Microsoft Lumia 640 XL, Nokia Lumia 735, Nokia Lumia 830, and
Motorola Moto G 4G, all built on the MSM8226 platform.
The GPU in MSM8226 is described, and MSM8974 gains watchdog support.
The PMICs are transitioned to use interrupts-extended to properly
reference the PMIC interrupt controller, in accordance with the
DeviceTree specification.
In addition to this, a variety of stylistic and DeviceTree validation
issues are corrected.
* tag 'qcom-arm32-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (60 commits)
ARM: dts: qcom: msm8974*: Re-enable remoteprocs on various boards
ARM: dts: qcom: msm8974: Remove bogus cd-gpio pinctrl
ARM: dts: qcom: msm8974-klte: Remove unused property
ARM: dts: qcom: msm8926-motorola-peregrine: Add initial device tree
ARM: dts: qcom: ipq4019: add dedicated SDHCI compatible
ARM: dts: qcom: Use "pcie" as the node name instead of "pci"
ARM: dts: qcom: msm8226: Add GPU
ARM: dts: qcom: Disable pm8941 & pm8226 smbb charger by default
ARM: dts: qcom: minor whitespace cleanup around '='
ARM: dts: qcom: sdx55: fix USB wakeup interrupt types
ARM: dts: qcom: Add support for HTC One Mini 2
ARM: dts: qcom: msm8974: Add watchdog node
ARM: dts: qcom: sdx65: correct SPMI node name
ARM: dts: qcom: sdx65: add missing GCC clocks
ARM: dts: qcom: sdx65: correct PCIe EP phy-names
ARM: dts: qcom: mdm9615: drop qcom, prefix from SSBI node name
ARM: dts: qcom: ipq8064: drop qcom, prefix from SSBI node name
ARM: dts: qcom: apq8060-dragonboard: rename mpp ADC channels to adc-channel
ARM: dts: qcom: pm8921: Disable keypad by default
ARM: dts: qcom: msm8974: move regulators to board files
...
Link: https://lore.kernel.org/r/20231219042914.732684-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.8
New features across K3 SoCs:
- ov5640 and imx219 sensor overlays added to various am62x/am62a boards.
- TP6594 and family support for J7200, j721s2,j721e, am69/j784s4 boards
Generic Fixes:
- minor white space cleanups
- Addition of optional regs for more complete DMA description across all K3
SoCs.
Misc:
- chip_id node moves under wkup_conf bus.
- COMPILE_TEST+OF_ALL_DTBS is now standard usage for testing overlays.
SoC specific Fixes/Features:
AM62A
- gpio pin count fixups.
AM625
- Adds verdin am62x-mallow board
- Adds IMG's AXE-RGX GPU support
- Adds gpio-ranges support for main domain GPIOs.
- SK now defaults to mcu gpio marked as reserved to cater to MCU use cases
AM64
- EVM/SK now defaults to mcu gpio marked as reserved to cater to MCU use cases
AM65
- Fix for DSS Irq trigger type, proper fixup for dss-oldi-io-ctrl node
- misc splitup to make AM652 device variant reusable
J7200
- mmc: itap delay fixups for DDR52
J721S2/AM68
- mmc: itap delay fixups for DDR50
J784S4/AM69
- mmc: itap delay fixups for DDR50
Board specific fixes/Features:
- iot2050 cleanups for enabling icssg-prueth nodes, runtime pinmuxing,
dropping ecap0pwm nodes, misc cleanups.
- am62x-verdin adds uart2, minor fixups for spi1 chip-select pinctrl
- am62-phycore adds hdmi support
- am64-phycore adds R5F support.
- am62x-beagleplay renames console uart pinmuxes.
* tag 'ti-k3-dt-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (56 commits)
arm64: dts: ti: k3-j784s4-main: Add Itap Delay Value For DDR50 speed mode
arm64: dts: ti: k3-j721s2-main: Add Itap Delay Value For DDR50 speed mode
arm64: dts: ti: k3-j7200-main: Add Itap Delay Value For DDR52 speed mode
arm64: dts: ti: k3-am6*: Add additional regs for DMA components
arm64: dts: ti: k3-j7*: Add additional regs for DMA components
arm64: dts: ti: k3-am65: Add additional regs for DMA components
arm64: dts: ti: k3-am62-main: Add GPU device node
arm64: dts: ti: k3-j721s2-evm: Add overlay for PCIE1 Endpoint Mode
arm64: dts: ti: k3-j721e-evm: Add overlay for PCIE0 Endpoint Mode
arm64: dts: ti: k3-j721e-sk: Add TPS6594 family PMICs
arm64: dts: ti: k3-am69-sk: Add support for TPS6594 PMIC
arm64: dts: ti: k3-j784s4-evm: Add support for TPS6594 PMIC
arm64: dts: ti: k3-j721e-som-p0: Add TP6594 family PMICs
arm64: dts: ti: k3-j721s2-som-p0: Add TP6594 family PMICs
arm64: dts: ti: k3-j7200-som-p0: Add TP6594 family PMICs
arm64: dts: ti: Add verdin am62 mallow board
dt-bindings: arm: ti: Add verdin am62 mallow board
arm64: dts: ti: verdin-am62: Improve spi1 chip-select pinctrl
arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Remove HDMI Reset Line Name
arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add HDMI support
...
Link: https://lore.kernel.org/r/20231218153115.szyd22tmoumqkn6g@occupier
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
Keystone2 device tree updates for v6.8
Cosmetic cleanups:
* white space cleanup around '='
* tag 'ti-keystone-dt-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
ARM: dts: ti: keystone: minor whitespace cleanup around '='
Link: https://lore.kernel.org/r/20231218153039.dok52xazqshbr6ie@playroom
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/dt
arm64: ZynqMP DT changes for 6.8
- Fix overlay rules to remove KR260 targets
- Move ethernet phys to mdio node
- Fix couple of issues reported by W=1
- Do not use _ in node names
- Use lowercase in register address
- Remove address/size-cells from nodes without child
- Moved fixed clock to root on KV260
- Fix issues reported by dt-schema
- additional compatible string for qspi on SOM
- Move arm/xilinx.yaml to soc vendor to cover also other archs
- Describe new Microblaze V qemu platform
- Add missing mailbox destination compatible string
* tag 'zynqmp-dt-for-6.8' of https://github.com/Xilinx/linux-xlnx:
arm64: zynqmp: Add missing destination mailbox compatible
arm64: zynqmp: Fix clock node name in kv260 cards
arm64: zynqmp: Move fixed clock to / for kv260
dt-bindings: soc: Add new board description for MicroBlaze V
dt-bindings: soc: xilinx: Move xilinx.yaml from arm to soc
arm64: xilinx: Remove address/size-cells from gem nodes
arm64: xilinx: Remove address/size-cells from flash node
arm64: xilinx: Put ethernet phys to mdio node
arm64: xilinx: Remove mt25qu512a compatible string from SOM
arm64: xilinx: Use lower case for partition address
arm64: xilinx: Do not use '_' in DT node names
arm64: dts: xilinx: Apply overlays to base dtbs
Link: https://lore.kernel.org/r/CAHTX3dLyA1Y9guLKSNJTChFVvkspMfTa0odULyAdcuFUSiSH3A@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree for 6.8:
- New board support: MBa93xxCA starter kit, LX2160A based MBLX2160A,
Dimonoff Gateway EVK, Verdin i.MX8M based Mallow, and SKOV i.MX8MP revB.
- A set of changes from Adam Ford to enable MIPI_DSI, overdrive mode and
NPU support for Beacon i.MX8M boards.
- A number of changes from Alexander Stein to add CCM interrupts for
CCM, 'chassis-type' property, and enable VPU and LVDS display for
TQ-Systems boards.
- i.MX93 update for AUDIO, I3C, ANATOP and uSDHC.
- A couple of changes from David Heidelberg to correct dt-schema check
errors for 'fsl,tmu-calibration' and 'gpio-fan,speed-map'.
- A bunch of nice dt-schema check fix-ups from Fabio Estevam.
- A couple of debix-som update from Kieran Bingham adding heartbeat LED
and CSI power regulators.
- White-space cleanup from Krzysztof Kozlowski.
- Add display support for imx8mn-bsh-smm-s2/pro board.
- A series from Tim Harvey to add TPM support for i.MX8M Venice devices.
* tag 'imx-dt64-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (69 commits)
arm64: dts: freescale: fix the schema check errors for fsl,tmu-calibration
arm64: dts: freescale: imx8qxp: Disable dsp reserved memory by default
arm64: dts: imx8qxp: Add VPU subsystem file
arm64: dts: imx8qxp-mek: Move port under USB connector
arm64: dts: imx8mn-bsh-smm-s2/pro: add display setup
arm64: dts: imx8mp-dhcom-pdk3: Describe the USB-C connector
arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector
arm64: dts: imx8mp-tqma8mpql-mba8mpxl: Fix USB connector description
arm64: dts: imx8mp-venice: Fix USB connector description
arm64: dts: imx8mp-verdin: Fix USB connector description
arm64: dts: imx8dxl-ss-conn: Move clk_dummy out of USB node
arm64: dts: imx8mn-evk: Move port under USB connector
arm64: dts: imx8mm-evk: Move port under USB connector
arm64: dts: freescale: introduce dimonoff-gateway-evk board
arm64: dts: imx8m*-tqma8m*: Add chassis-type
arm64: dts: imx8mn-beacon: Support overdrive mode
arm64: dts: imx8mn: Enable Overdrive mode
arm64: dts: imx8mm-beacon: Enable overdrive mode
arm64: dts: imx8mm: Add optional overdrive DTSI
arm64: dts: imx8mm: Reduce GPU to nominal speed
...
Link: https://lore.kernel.org/r/20231216064605.876196-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree for 6.8:
- A bunch of changes from Fabio Estevam cleaning up dt-schema warnings.
- A number of i.MX7 related small fixes and peripheral addition from
Alexander Stein.
- A set of changes from Hiago De Franco adding usdhc aliases for Apalis
and Colibri boards.
- A white-space cleanup from Krzysztof Kozlowski.
- A change from Linus Walleij to correct errors in the Marvell MV88E6xxx
switch descriptions.
- Fix a couple of typo in comment for MBA6 and MBA6ULX board.
- Add on-chip memory and enable MIPI-DSI support for i.MX7.
- Add LM75A sensor for TQMA7 board.
* tag 'imx-dt-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (41 commits)
ARM: dts: imx27-phytec-phycore-som: Use 'rtc' as node name
ARM: dts: imx25: Remove unneeded keypad properties
ARM: dts: imx23/28: Fix the DMA controller node name
ARM: dts: imx23-sansa: Use preferred i2c-gpios properties
ARM: dts: imx27-apf27dev: Fix LED name
ARM: dts: imx25/27: Pass timing0
ARM: dts: imx25: Fix the iim compatible string
ARM: dts: imx25: Move usbphy nodes out of simple-bus
ARM: dts: imx1: Use 'bus' for AIPI bus
ARM: dts: imx27-phytec-phycore-rdk: Move usbphy nodes out of simple-bus
ARM: dts: imx27-pdk: Move usbphy0 out of simple-bus
ARM: dts: imx27: Use 'bus' for EMI bus
ARM: dts: imx27: Use 'bus' for AIPI bus
ARM: dts: imx27-phytec-phycore-som: Use the mux- prefix
ARM: dts: imx1: Fix sram node
ARM: dts: imx27: Fix sram node
ARM: dts: imx: Use flash@0,0 pattern
ARM: dts: imx25/27-eukrea: Fix RTC node name
ARM: dts: imx25-pdk: Pass #sound-dai-cells
ARM: dts: imx25: Pass I2C clock-names property
...
Link: https://lore.kernel.org/r/20231216064605.876196-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX DT bindings for 6.8:
- New vendor prefix for Dimonoff and echarge Véhicule Électrique (RVE).
- New board compatible for TQ-Systems LX2160A, RVE gateway, Dimonoff
gateway EVK, i.MX8M Mallow and SKOV i.MX8MP RevB board.
* tag 'imx-bindgins-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: add Dimonoff gateway EVK board
dt-bindings: vendor-prefixes: add dimonoff
dt-bindings: arm: fsl: Add TQ-Systems LX2160A based boards
dt-bindings: arm: fsl: add verdin imx8mp mallow board
dt-bindings: arm: fsl: add verdin imx8mm mallow board
dt-bindings: arm: Add compatible for SKOV i.MX8MP RevB board
dt-bindings: arm: fsl: add RVE gateway board
dt-bindings: vendor-prefixes: add rve
Link: https://lore.kernel.org/r/20231216064605.876196-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into soc/dt
More Ux500 device tree updates for v6.8
The HREF520 reference design had the wrong analog baseband
defined causing a boot regression.
Was AB8500, but this board has AB8505.
Rearrange the device trees to make it possible to define
a different AB and slot it in.
* tag 'ux500-dts-soc-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: ux500-href: Switch HREF520 to AB8505
ARM: dts: ux500-href: Push AB8500 config out
ARM: dts: ux500-href: Push AB8500 inclusion to the top
Link: https://lore.kernel.org/r/CACRpkdZ9wCV7oohF2KX6MFwmuSPR_i7et8O5SH=op6gyQ4mOvQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.8 (take two)
- Add IA55 interrupt controller and Ethernet support for the RZ/G3S
SoC and the RZ/G3S SMARC SoM,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: white-hawk-cpu: Fix missing serial console pin control
arm64: dts: renesas: rzg3s-smarc-som: Enable the Ethernet interfaces
arm64: dts: renesas: rzg3s-smarc-som: Use switches' names to select on-board functionalities
arm64: dts: renesas: r9a08g045: Add Ethernet nodes
arm64: dts: renesas: r9a08g045: Add IA55 interrupt controller node
Link: https://lore.kernel.org/r/cover.1702642342.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.8, round 1
Highlights:
----------
- MCU:
- Add SPI support on STM32F746.
- Better describe vcc_3v3 for SD and DSI on stm32f469-disco.
- MPU:
- STM32MP13:
- Add DCMIPP (Digital Camera Memory Interface Piwel Processor) on STM32MP135.
- STMP32MP15:
- Change "phys" affectation from board to Soc dtsi file for USB host as it is hard linked
to the port 0 of usbphyc.
- Fix SCMI and No-SCMI compatible in boards.
- STM32MP25:
- Add BSEC support to read the device part number OTP and the package data register OTP.
* tag 'stm32-dt-for-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: add dcmipp support to stm32mp135
arm64: dts: st: add bsec support to stm32mp25
ARM: dts: stm32: Consolidate usbh_[eo]hci phy properties on stm32mp15
ARM: dts: stm32: don't mix SCMI and non-SCMI board compatibles
dt-bindings: arm: stm32: don't mix SCMI and non-SCMI board compatibles
ARM: dts: stm32: minor whitespace cleanup around '='
ARM: dts: stm32: add SPI support on STM32F746
ARM: dts: stm32: add STM32F746 syscfg clock
ARM: dts: stm32: use the same 3v3 for SD and DSI nodes on stm32f469-disco
Link: https://lore.kernel.org/r/9363227b-1c44-4a20-b245-efbbbf9ab1dd@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
- new boards: Orange Pi Zero 2W, Transpeed 8K618-T
* tag 'sunxi-dt-for-6.8-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h618: add Transpeed 8K618-T TV box
dt-bindings: arm: sunxi: document Transpeed 8K618-T board name
dt-bindings: vendor-prefixes: add Transpeed
arm64: dts: allwinner: h616: add Orange Pi Zero 2W support
dt-bindings: arm: sunxi: add Orange Pi Zero 2W
Link: https://lore.kernel.org/r/ZXtWFk-Bne835txP@archlinux
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.8
It contains:
- IRQ support for Ethernet PHYs on SAM9X60-EK and SAM9X60-Curiosity
boards
- removal of the mmc-ddr-3_3v property from SD controllers connected to SD
slots, for SAMA5D27-WLSOM1-EK and SAMA5D27-SOM1-EK boards, as this
property is for eMMC devices
* tag 'at91-dt-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sama5d27_som1_ek: Remove mmc-ddr-3_3v property from sdmmc0 node
ARM: dts: microchip: sama5d27_wlsom1_ek: Remove mmc-ddr-3_3v property from sdmmc0 node
ARM: dts: microchip: sam9x60ek: Add IRQ support for ethernet PHY
ARM: dts: microchip: sam9x60_curiosity: Add IRQ support for ethernet PHY
Link: https://lore.kernel.org/r/20231214174954.3045355-1-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/dt
Arm Vexpress/Juno update for v6.8
Just a single update to align the thermal zone names with bindings matching
[alphanumericals]*-thermal pattern.
* tag 'juno-update-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Align thermal zone names with bindings
Link: https://lore.kernel.org/r/20231213115826.3577764-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards are the Geniatech XPI-3128 (RK3128), Sonoff iHost (rv1109)
One "new" soc is the rv1109 which is a two-core variant of the rv1126
and everything else is identical.
Lots of love for the old rk3128 (power-domains, gpu, gmac, usb) and
rv1126 (uart pins, i2c2 special case) and rework of aliases to have
core busses that are hard-numbered in boards and documentation centrally
in the dtsi, but the per board aliases in the boards (ethernet).
Plus the rk3036 got a yaml hdmi binding which required some small fixes.
* tag 'v6.8-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (24 commits)
ARM: dts: rockchip: add hdmi-connector node to rk3036-kylin
ARM: dts: rockchip: fix rk3036 hdmi ports node
ARM: dts: rockchip: add gpio alias for gpio dt nodes
ARM: dts: rockchip: Move uart aliases to SoC dtsi for RK3128
ARM: dts: rockchip: Move i2c aliases to SoC dtsi for RK3128
ARM: dts: rockchip: Move gpio aliases to SoC dtsi for RK3128
ARM: dts: rockchip: Add Sonoff iHost Smart Home Hub
dt-bindings: arm: rockchip: Add Sonoff iHost
ARM: dts: rockchip: Add rv1109 SoC
ARM: dts: rockchip: Split up rgmii1 pinctrl on rv1126
ARM: dts: rockchip: Add i2c2 node to rv1126
ARM: dts: rockchip: Serial aliases for rv1126
ARM: dts: rockchip: Add alternate UART pins to rv1126
ARM: dts: rockchip: Enable GPU for XPI-3128
ARM: dts: rockchip: Add GPU node for RK3128
ARM: dts: rockchip: Add power-controller for RK3128
ARM: dts: rockchip: Enable gmac for XPI-3128
ARM: dts: rockchip: Add gmac node for RK3128
ARM: dts: rockchip: Make usbphy the parent of SCLK_USB480M for RK3128
ARM: dts: rockchip: Add dwc2 otg fifo siztes for RK3128
...
Link: https://lore.kernel.org/r/3197878.5fSG56mABF@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards are the Anberic RG351V handheld (rk3326), Theobroma Systems Jaguar
SBC (rk3588), Powkiddy X55 and RK2023 handheld (rk3566), Edgeble-Neu6b (rk3588)
The rk3588 got attention with one working usb3 host on Rock-5a/5b, Orangepi-5
and audio for the EVB1.
Some smaller improvements for the other socs (fifo-depths on rk3328,
gpio-line-names on rk3308-rock-pi-s, gpu power-coefficients on rk3399,
and a fix for the newly converted gpio-fan yaml binding).
Also a number of aliases were moved. Always-numbered core busses can have their
aliases in the soc dtsi, as is done in a number of cases already and other alises
like ethernet really should be per board.
* tag 'v6.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (31 commits)
arm64: dts: rockchip: Add Anbernic RG351V
arm64: dts: rockchip: Split RG351M from Odroid Go Advance
dt-bindings: arm: rockchip: Add Anbernic RG351V
arm64: dts: rockchip: Add ethernet0 alias to the dts for RK3588(S) boards
arm64: dts: rockchip: Add ethernet0 alias to the dts for RK3566 boards
arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for PX30
arm64: dts: rockchip: Remove ethernetX aliases from the SoC dtsi for RK3328
arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for RK3368
arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for RK3399
arm64: dts: rockchip: make dts use gpio-fan matrix instead of array
arm64: dts: rockchip: add gpio alias for gpio dt nodes
arm64: dts: rockchip: Add dynamic-power-coefficient to rk3399 GPU
arm64: dts: rockchip: add rk3588 spi aliases to soc dtsi
arm64: dts: rockchip: add rk3588 gpio aliases to soc dtsi
arm64: dts: rockchip: add rk3588 i2c aliases to soc dtsi
arm64: dts: rockchip: move rk3588 serial aliases to soc dtsi
arm64: dts: rockchip: add Theobroma Jaguar SBC
dt-bindings: arm: rockchip: Add Theobroma-Systems Jaguar SBC
arm64: dts: rockchip: Add Powkiddy X55
dt-bindings: arm: rockchip: Add Powkiddy X55
...
Link: https://lore.kernel.org/r/3535836.iIbC2pHGDl@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM64 DeviceTree updates for v6.8
This adds devicetree bindings and nodes for:
- Media Data Path 3 (MDP3) bindings and enablement on MT8195
- Smart Voltage Scaling (SVS) on MT8195
- LVTS SoC thermal on MT8192
- MT8188 SoC along with its resets, display bindings, and more
- MT8183 hardware video decoder (mtk-vcodec-dec)
Adds the following new machines:
- MT8188 Evaluation Board (EVB)
- MT8183 Chromebooks: Kukui-Katsu, Jacuzzi-Makomo, Pico, Pico6
Performs cleanups for various MediaTek SoCs and PMICs, and also
includes some spare fixes.
* tag 'mtk-dts64-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (60 commits)
arm64: dts: mediatek: mt8192: Add Smart Voltage Scaling node
arm64: dts: mediatek: mt8195: Add SVS node and reduce LVTS_AP iospace
arm64: dts: mediatek: mt8183: Change iospaces for thermal and svs
arm64: dts: mediatek: mt8186: fix address warning for ADSP mailboxes
arm64: dts: mediatek: mt8186: Fix alias prefix for ovl_2l0
arm64: dts: mt6358: Drop bogus "regulator-fixed" compatible properties
arm64: dts: mt8183: kukui-jacuzzi: Drop bogus anx7625 panel_flag property
arm64: dts: Add MediaTek MT8188 dts and evaluation board and Makefile
dt-bindings: soc: mediatek: pwrap: Modify compatible for MT8188
dt-bindings: arm: mediatek: Add mt8188 pericfg compatible
dt-bindings: arm: Add compatible for MediaTek MT8188
arm64: dts: mediatek: mt8195: add DSI and MIPI DPHY nodes
dt-bindings: display: mediatek: dsi: add compatible for MediaTek MT8195
arm64: dts: mediatek: mt6358: Merge ldo_vcn33_* regulators
dt-bindings: arm: mediatek: convert audsys and mt2701-afe-pcm to yaml
arm64: dts: mediatek: mt8195: add MDP3 nodes
arm64: dts: mediatek: mt8195: revise VDOSYS RDMA node name
arm64: dts: mediatek: mt8183: correct MDP3 DMA-related nodes
dt-bindings: display: mediatek: padding: add compatible for MT8195
dt-bindings: display: mediatek: split: add compatible for MT8195
...
Link: https://lore.kernel.org/r/20231212114515.121695-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM changes for v6.8
1. Exynos4212 and Exynos4412: Final fixes for dtbs_check warnings.
Replace duplicate PMU node in FIMC IS node with syscon phandle. The
old solution of duplicated PMU node was not a correct representation of
the hardware and could have concurrent access issues.
The DTS change depends on media FIMC IS drivers changes already
merged in previous cycle, thus it is not fully
backwards-compatible. It is a necessary trade-off in fixing wrong
description in DTS.
With this fix, `make dtbs_check` status looks like:
S3C6410: no warnings
Exynos: no warnings, one undocumented compatible
S5PV210: one warning, one undocumented compatible
2. Exynos4210, Exynos4212, Exynos4412, S5PV210:
Correct FIMC IS camera ranges and IO addresses to silence dtc W=1
warnings. No functional impact expected.
After this fix, there are no dtc W=1 warnings on all ARMv7 platforms.
3. Galaxy I9100: Fix 12-second hang during boot by enabling regulator
(real cause not really known), add touch keys and accelerometer.
* tag 'samsung-dt-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: samsung: exynos4210-i9100: Add accelerometer node
ARM: dts: samsung: exynos4210-i9100: Add node for touch keys
ARM: dts: samsung: exynos4210-i9100: Unconditionally enable LDO12
ARM: dts: samsung: s5pv210: fix camera unit addresses/ranges
ARM: dts: samsung: exynos4: fix camera unit addresses/ranges
ARM: dts: samsung: exynos4x12: replace duplicate pmu node with phandle
Link: https://lore.kernel.org/r/20231212093105.13938-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
