| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The G2H handler needs to be flushed during a GT reset but a G2H
indicating engine reset failure can trigger a GT reset. Add a worker to
trigger the GT rest when an engine reset failure is received to break
this circular dependency.
v2:
(John Harrison)
- Store engine reset mask
- Fix typo in commit message
v3:
(John Harrison)
- Fix another typo in commit message
- s/reset_*/reset_fail_*/
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220121043118.24886-3-matthew.brost@intel.com
|
|
Allocate intel_engine_coredump_alloc with ALLOW_FAIL rather than
GFP_KERNEL to fully decouple the error capture from fence signalling.
v2:
(John Harrison)
- Fix typo in commit message (s/do/to)
Fixes: 8b91cdd4f8649 ("drm/i915: Use __GFP_KSWAPD_RECLAIM in the capture code")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220121043118.24886-2-matthew.brost@intel.com
|
|
out of order
In the i915 there are several hacks in place to make request cancellation
work with an old version of the GuC which delivered the G2H indicating
schedule disable is done before G2H indicating a context reset. Version
69 fixes this, so we can remove these hacks.
v2:
(Checkpatch)
- s/cancelation/cancellation
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220113181351.21296-3-matthew.brost@intel.com
|
|
Add a cancel request selftest that results in an engine reset to cancel
the request as it is non-preemptable. Also insert a NOP request after
the cancelled request and confirm that it completes successfully.
v2:
(Tvrtko)
- Skip test if preemption timeout compiled out
- Skip test if engine reset isn't supported
- Update debug prints to be more descriptive
v3:
- Add comment explaining test
v4:
(John Harrison)
- Fix typos in comment explaining test
- goto out_rq is NOP creation fails
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220113181351.21296-2-matthew.brost@intel.com
|
|
Add a flag PIN_VALIDATE, to indicate we don't need to pin and only
protected by the object lock.
This removes the need to unpin, which is done by just releasing the
lock.
eb_reserve is slightly reworked for readability, but the same steps
are still done:
- First pass pins with NONBLOCK.
- Second pass unbinds all objects first, then pins.
- Third pass is only called when not all objects are softpinned, and
unbinds all objects, then calls i915_gem_evict_vm(), then pins.
Changes since v1:
- Split out eb_reserve() into separate functions for readability.
Changes since v2:
- Make batch buffer mappable on platforms where only GGTT is available,
to prevent moving the batch buffer during relocations.
Changes since v3:
- Preserve current behavior for batch buffer, instead be cautious when
calling i915_gem_object_ggtt_pin_ww, and re-use the current batch vma
if it's inside ggtt and map-and-fenceable.
- Remove impossible condition check from eb_reserve. (Matt)
Changes since v5:
- Do not even temporarily pin, just call i915_gem_evict_vm() and mark
all vma's as unpinned.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220114132320.109030-7-maarten.lankhorst@linux.intel.com
|
|
Now that we require the object lock for all ops, some code handling
race conditions can be removed.
This is required to not take short-term pins inside execbuf.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220114132320.109030-6-maarten.lankhorst@linux.intel.com
|
|
i915_vma_unbind, v2.
We want to remove more members of i915_vma, which requires the locking to
be held more often.
Start requiring gem object lock for i915_vma_unbind, as it's one of the
callers that may unpin pages.
Some special care is needed when evicting, because the last reference to
the object may be held by the VMA, so after __i915_vma_unbind, vma may be
garbage, and we need to cache vma->obj before unlocking.
Changes since v1:
- Make trylock failing a WARN. (Matt)
- Remove double i915_vma_wait_for_bind() (Matt)
- Move atomic_set to right before mutex_unlock(), to make it more clear
they belong together. (Matt)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220114132320.109030-5-maarten.lankhorst@linux.intel.com
|
|
i915_gem_evict_something, v2.
Because we will start to require the obj->resv lock for unbinding,
ensure these vma eviction utility functions also take the lock.
This requires some function signature changes, to ensure that the
ww context is passed around, but is mostly straightforward.
Previously this was split up into several patches, but reworking
should allow for easier bisection.
Changes since v1:
- Handle evicting dead objects better.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220114132320.109030-4-maarten.lankhorst@linux.intel.com
|
|
i915_gem_evict_vm will need to be able to evict objects that are
locked by the current ctx. By testing if the current context already
locked the object, we can do this correctly. This allows us to
evict the entire vm even if we already hold some objects' locks.
Previously, this was spread over several commits, but it makes
more sense to commit the changes to i915_gem_evict_vm separately
from the changes to i915_gem_evict_something() and
i915_gem_evict_for_node().
Changes since v1:
- Handle evicting dead objects better.
Changes since v2:
- Use for_i915_gem_ww in igt_evict_vm. (Thomas)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
[mlankhorst: Fix up doc warning.]
Link: https://patchwork.freedesktop.org/patch/msgid/20220117075604.131477-1-maarten.lankhorst@linux.intel.com
|
|
errors, v2.
Now that we cannot unbind kill the currently locked object directly
because we're removing short term pinning, we may have to unbind the
object from gtt manually, using a i915_gem_evict_vm() call.
Changes since v1:
- Remove -ENOSPC warning, can still happen with concurrent mmaps
where we can't unbind the other mmap because of the lock held.
This fixes the gem_mmap_gtt@cpuset tests.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220114132320.109030-2-maarten.lankhorst@linux.intel.com
|
|
Maarten needs backmerge to account for header file renames/changes which
landed via drm-intel-next and are interfering with his pinning work.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
Don't populate the read-only array flex_regs on the stack but
instead it static const. Also makes the object code a little smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220112223435.949071-1-colin.i.king@gmail.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-5.17-2022-01-12:
amdgpu:
- SR-IOV fixes
- Suspend/resume fixes
- Display fixes
- DMCUB fixes
- DP alt mode fixes
- RAS fixes
- UBSAN fix
- Navy Flounder VCN fix
- ttm resource manager cleanup
- default_groups change for kobj_type
- vkms fix
- Aldebaran fixes
amdkfd:
- SDMA ECC interrupt fix
- License clarification
- Pointer check fix
- DQM fixes for hawaii
- default_groups change for kobj_type
- Typo fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220113030537.5758-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
* atomic helpers: Fix error messages
* mipi-dbi: Fix buffer mapping
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YeGHu7qU92pjuQOn@linux-uq9g
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
Two DT bindings fixes for meson, a device refcounting fix for sun4i, a
probe fix for vga16fb, a locking fix for the CMA dma-buf heap and a
compilation fix for ttm.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: I made sure I have exactly the same conflict resolution as
Linus in 8d0749b4f83b ("Merge tag 'drm-next-2022-01-07' of
git://anongit.freedesktop.org/drm/drm") to avoid further conflict fun.
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220114125454.zs46ny52lrxk3ljz@houat
|
|
Set the source-buffer address after mapping the buffer into the
kernel's address space. Makes MIPI DBI helpers work again.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: c47160d8edcd ("drm/mipi-dbi: Remove dependency on GEM CMA helper library")
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reported-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111132634.18302-1-tzimmermann@suse.de
(cherry picked from commit 9d31993451f6bb4059a9b9eec4856b2225e36df0)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
The patch d1af5cd86997 ("drm: get rid of DRM_DEBUG_* log
calls in drm core, files drm_a*.c") fails when the drm_device
cannot be found in the parameter plane_state->crtc.
Fix it using plane_state->plane.
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: 6e22dc358377 ("drm: get rid of DRM_DEBUG_* log calls in drm core, files drm_a*.c")
Signed-off-by: Claudio Suarez <cssk@net-c.es>
[danvet: fix Fixes: line]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/YaiXEARd8z2C463h@gineta.localdomain
(cherry picked from commit 521d459b1935628a7caa0753429f880dae2dbfc9)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
* Fix use of CRTC state's active vs enable in atomic helper
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Yd/i/zj9vEHisSSB@linux-uq9g
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Hold runtime PM wakelock during PXP unbind (Juston Li)
- Three fixes for the TTM backend fault handling (Matthew Auld)
- Make sure to unmap when purging in the TTM backend (Matthew Auld)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Yd/xzyCM87rfrwQT@tursulin-mobl2
|
|
Even if it's probably not really useful, it can get selected
by e.g. randconfig builds, and then failing to compile is an
annoyance. Unfortunately, it's hard to fix in Kconfig, since
DRM_TTM is selected by many things that don't really depend
on any specific architecture, and just depend on PCI (which
is indeed now available in ARCH=um via simulation/emulation).
Fix this in the code instead by just ifdef'ing the relevant
two lines that depend on "real X86".
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211220111519.a4c8c6eff702.Ie4cf4e68698f6a9f546b83379bc52c266504424f@changeid
|
|
Fix cma_heap_buffer mutex locking critical section to protect vmap_cnt
and vaddr.
Fixes: a5d2d29e24be ("dma-buf: heaps: Move heap-helper logic into the cma_heap implementation")
Signed-off-by: Weizhao Ouyang <o451686892@gmail.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220104073545.124244-1-o451686892@gmail.com
|
|
The vga16fb framebuffer driver only supports Enhanced Graphics Adapter
(EGA) and Video Graphics Array (VGA) 16 color graphic cards.
But it doesn't check if the adapter is one of those or if a VGA16 mode
is used. This means that the driver will be probed even if a VESA BIOS
Extensions (VBE) or Graphics Output Protocol (GOP) interface is used.
This issue has been present for a long time but it was only exposed by
commit d391c5827107 ("drivers/firmware: move x86 Generic System
Framebuffers support") since the platform device registration to match
the {vesa,efi}fb drivers is done later as a consequence of that change.
All non-x86 architectures though treat orig_video_isVGA as a boolean so
only do the supported video mode check for x86 and not for other arches.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215001
Fixes: d391c5827107 ("drivers/firmware: move x86 Generic System Framebuffers support")
Reported-by: Kris Karas <bugs-a21@moonlit-rail.com>
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Kris Karas <bugs-a21@moonlit-rail.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220110095625.278836-3-javierm@redhat.com
|
|
Three misspelled ASICs in comments here, so fix the spelling
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
start_nocpsch would never set dqm->sched_running on Hawaii due to an
early return statement. This would trigger asserts in other functions
and end up in inconsistent states.
Bug: https://github.com/RadeonOpenCompute/ROCm/issues/1624
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For some reason this file isn't using the appropriate register
headers for DCN headers, which means that on DCN2 we're getting
the VIEWPORT_DIMENSION offset wrong.
This means that we're not correctly carving out the framebuffer
memory correctly for a framebuffer allocated by EFI and
therefore see corruption when loading amdgpu before the display
driver takes over control of the framebuffer scanout.
Fix this by checking the DCE_HWIP and picking the correct offset
accordingly.
Long-term we should expose this info from DC as GMC shouldn't
need to know about DCN registers.
Cc: stable@vger.kernel.org
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
PMFW only returns 0 on master die and sends NACK back on other dies for
the message.
v2: only send GmiPwrDnControl msg on master die instead of all
dies.
v3: remove the pointer check for get_socket_id and get_die_id as they
should be present on Aldebaran.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This is observed in SRIOV case with virtual KMS as display.
_raw_spin_lock_irqsave+0x37/0x40
drm_handle_vblank+0x69/0x350 [drm]
? try_to_wake_up+0x432/0x5c0
? amdgpu_vkms_prepare_fb+0x1c0/0x1c0 [amdgpu]
drm_crtc_handle_vblank+0x17/0x20 [drm]
amdgpu_vkms_vblank_simulate+0x4d/0x80 [amdgpu]
__hrtimer_run_queues+0xfb/0x230
hrtimer_interrupt+0x109/0x220
__sysvec_apic_timer_interrupt+0x64/0xe0
asm_call_irq_on_stack+0x12/0x20
Fixes: 84ec374bd580 ("drm/amdgpu: create amdgpu_vkms (v4)")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Kelly Zytaruk <kelly.zytaruk@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In some APU project we needn't always assign flags to identify each other,
so we may not need return an error.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The remove_list head was only used for keeping track of existing ranges
that are to be removed from the svms->list. The update_list was used for
new or existing ranges that need updated attributes. These two cases are
mutually exclusive (i.e. the same range will never be on both lists).
Therefore we can use the update_list head to track the remove_list and
save another 16 bytes in the svm_range struct.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There are seven list_heads in struct svm_range: list, update_list,
remove_list, insert_list, svm_bo_list, deferred_list, child_list. This
patch and the next one remove two of them that are redundant.
The insert_list head was only used for new ranges that are not on the
svms->list yet. So we can use that list head for keeping track of
new ranges before they get added, and use list_move_tail to move them
to the svms->list when ready.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Commit b5f57384805a ("drm/amdkfd: Add sysfs bitfields and enums to uAPI")
adds include/uapi/linux/kfd_sysfs.h with the "GPL-2.0 OR MIT WITH
Linux-syscall-note" SPDX-License expression.
The command ./scripts/spdxcheck.py warns:
include/uapi/linux/kfd_sysfs.h: 1:48 Exception not valid for license MIT: Linux-syscall-note
For a uapi header, the file under GPLv2 License must be combined with the
Linux-syscall-note, but combining the MIT License with the
Linux-syscall-note makes no sense, as the note provides an exception for
GPL-licensed code, not for permissively licensed code.
So, reorganize the SPDX expression to only combine the note with the GPL
License condition. This makes spdxcheck happy again.
Fixes: b5f57384805a ("drm/amdkfd: Add sysfs bitfields and enums to uAPI")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: kstewart@linuxfoundation.org
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
As the possible failure of the allocation, kmemdup() may return NULL
pointer.
Therefore, it should be better to check the 'props2' in order to prevent
the dereference of NULL pointer.
Fixes: 3a87177eb141 ("drm/amdkfd: Add topology support for dGPUs")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The function performs a check on the "adev" input parameter, however, it
is used before the check.
Initialize the "dev" variable after the sanity check to avoid a possible
NULL pointer dereference.
Fixes: e27c41d5b0681 ("drm/amd/display: Support for DMUB HPD interrupt handling")
Addresses-Coverity-ID: 1493909 ("Null pointer dereference")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit fbcdbfde87509d523132b59f661a355c731139d0.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Otherwise future commands may fail as well leading to downstream
problems that look like they stemmed from a timeout the first time
but really didn't.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the amdkfd sysfs code to use default_groups field which has
been the preferred way since aa30f47cf666 ("kobject: Add support for
default attribute groups to kobj_type") so that we can soon get rid of
the obsolete default_attrs field.
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the amdgpu sysfs code to use default_groups field which has
been the preferred way since aa30f47cf666 ("kobject: Add support for
default attribute groups to kobj_type") so that we can soon get rid of
the obsolete default_attrs field.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jonathan Kim <jonathan.kim@amd.com>
Cc: Kevin Wang <kevin1.wang@amd.com>
Cc: shaoyunl <shaoyun.liu@amd.com>
Cc: Tao Zhou <tao.zhou1@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The function amdgpu_mm_wreg_mmio_rlc() is used by debugfs to write to
MMIO registers. It didn't support registers beyond the BAR mapped MMIO
space. This adds pcie indirect write support.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Get rid off pin/unpin of gart BO at resume/suspend and
instead pin only once and try to recover gart content
at resume time. This is much more stable in case there
is OOM situation at 2nd call to amdgpu_device_evict_resources()
while evicting GART table.
v3: remove gart recovery from other places
v2: pin gart at amdgpu_gart_table_vram_alloc()
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Do not allow exported amdgpu_vram_mgr_*() to accept
any ttm_resource_manager pointer. Also there is no need
to force other module to call a ttm function just to
eventually call vram_mgr functions.
v2: pass adev's vram_mgr instead of adev
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove unused amdgpu_amdkfd_get_vram_usage()
CC: Felix.Kuehling@amd.com
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: dfcbe6d5f4a340 ("drm/amdgpu: Remove unused function pointers")
|
|
Do not allow exported amdgpu_gtt_mgr_*() to accept
any ttm_resource_manager pointer. Also there is no need
to force other module to call a ttm function just to
eventually call gtt_mgr functions.
v4: remove unused adev.
v3: upcast mgr from ttm resopurce manager instead of
getting it from adev.
v2: pass adev's gtt_mgr instead of adev.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Patch: 3efb17ae7e92 ("drm/amdgpu: Call amdgpu_device_unmap_mmio() if device
is unplugged to prevent crash in GPU initialization failure") makes call to
amdgpu_device_unmap_mmio() conditioned on device unplugged. This patch unmaps
MMIO mappings even when device is not unplugged.
v2: Add condition of drm_dev_enter() to deleted unmaps in patch
"drm/amdgpu: Unmap all MMIO mappings"
Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Certain Navy Flounder cards have 2 VCNs, enable it.
Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When UBSAN is enabled a case is shown on unplugging the display that
this variable hasn't been initialized by `update_dsc_caps`, presumably
when the display was unplugged it wasn't copied from the DPCD.
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1956497
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Memory of err_data should be cleaned before usage
when there're multiple entry in ras ih.
Otherwise garbage data from last loop will be used.
Signed-off-by: Jiawei Gu <Jiawei.Gu@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If the GuC fails to load, it is useful to know what firmware file /
version was attempted. So move the version info report to before the
load attempt rather than only after a successful load.
If the GuC does fail to load, then make the error messages visible
rather than being 'debug' prints that do not appears in dmesg output
by default.
When waiting for the GuC to load, it used to be necessary to check for
two different states - READY and (LAPIC_DONE | MIA_CORE). Apparently
the second signified init complete on RC6 exit. However, in more
recent GuC versions the RC6 exit sequence now finishes with status
READY as well. So the test can be simplified.
Also, add an enum giving all the current status codes that GuC loading
can report as a reference without having to pull and search through
the GuC source files.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220107000622.292081-4-John.C.Harrison@Intel.com
|
|
Update to the latest GuC release.
The latest GuC firmware introduces a number of interface changes:
GuC may return NO_RESPONSE_RETRY message for requests sent over CTB.
Add support for this reply and try resending the request again as a
new CTB message.
A KLV (key-length-value) mechanism is now used for passing
configuration data such as CTB management.
With the new KLV scheme, the old CTB management actions are no longer
used and are removed.
Register capture on hang is now supported by GuC. Full i915 support
for this will be added by a later patch. A minimum support of
providing capture memory and register lists is required though, so add
that in.
The device id of the current platform needs to be provided at init time.
The 'poll CS' w/a (Wa_22012773006) was blanket enabled by previous
versions of GuC. It must now be explicitly requested by the KMD. So,
add in the code to turn it on when relevant.
The GuC log entry format has changed. This requires adding a new field
to the log header structure to mark the wrap point at the end of the
buffer (as the buffer size is no longer a multiple of the log entry
size).
New CTB notification messages are now sent for some things that were
previously only sent via MMIO notifications.
Of these, the crash dump notification was not really being handled by
i915. It called the log flush code but that only flushed the regular
debug log and then only if relay logging was enabled. So just report
an error message instead.
The 'exception' notification was just being ignored completely. So add
an error message for that as well.
Note that in either the crash dump or the exception case, the GuC is
basically dead. The KMD will detect this via the heartbeat and trigger
both an error log (which will include the crash dump as part of the
GuC log) and a GT reset. So no other processing is really required.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220107000622.292081-3-John.C.Harrison@Intel.com
|
|
There is a known (but exceedingly unlikely) race condition where the
asynchronous frequency management code could reduce the GT clock while
a GuC reload is in progress (during a full GT reset). A fix is in
progress but there are complex locking issues to be resolved. In the
meantime bump the timeout to 200ms. Even at slowest clock, this
should be sufficient. And in the working case, a larger timeout makes
no difference.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220107000622.292081-2-John.C.Harrison@Intel.com
|
|
in self refresh mode
Actual hardware state of CRTC is controlled by the member 'active' in
struct drm_crtc_state instead of the member 'enable', according to the
kernel doc of the member 'enable'. In fact, the drm client modeset
and atomic helpers are using the member 'active' to do the control.
Referencing the member 'enable' of new_crtc_state, the function
crtc_needs_disable() may fail to reflect if CRTC needs disable in
self refresh mode, e.g., when the framebuffer emulation will be blanked
through the client modeset helper with the next commit, the member
'enable' of new_crtc_state is still true while the member 'active' is
false, hence the relevant potential encoder and bridges won't be disabled.
So, let's check new_crtc_state->active to determine if CRTC needs disable
in self refresh mode instead of new_crtc_state->enable.
Fixes: 1452c25b0e60 ("drm: Add helpers to kick off self refresh mode in drivers")
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211230040626.646807-1-victor.liu@nxp.com
|
