summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-06-22ARCv2: Support for ARCv2 ISA and HS38x coresVineet Gupta22-33/+737
The notable features are: - SMP configurations of upto 4 cores with coherency - Optional L2 Cache and IO-Coherency - Revised Interrupt Architecture (multiple priorites, reg banks, auto stack switch, auto regfile save/restore) - MMUv4 (PIPT dcache, Huge Pages) - Instructions for * 64bit load/store: LDD, STD * Hardware assisted divide/remainder: DIV, REM * Function prologue/epilogue: ENTER_S, LEAVE_S * IRQ enable/disable: CLRI, SETI * pop count: FFS, FLS * SETcc, BMSKN, XBFU... Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-22ARCv2: [intc] HS38 core interrupt controllerVineet Gupta4-0/+282
Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-22ARC: uncached base is hard constant for ARC, don't save itVineet Gupta2-3/+2
ioremap already uses the hard define, just make sure BCR value matches that Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: intc: split into ARCompact ISA specific, common bitsVineet Gupta7-379/+412
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: Make way for pt_regs != user_regs_structVineet Gupta2-9/+137
These have been register compatible so far. However ARCv2 mandates different pt_regs layout (due to h/w auto save). To keep pt_regs same for both, we start by removing the assumption - used mainly for block copies between the 2 structs in signal handling and ptrace Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: entry.S: [arcompact] simplify SWITCH_TO_KERNEL_STKVineet Gupta1-36/+35
Previously this macro was overloaded with stack switching, saving SP at right slot in pt_regs, saving/setup of r25 and setting SP baseline to where pt_regs->sp is saved (vs. bottom of pt_regs) Now it only does SP switch, and leaves SP pointing to bottom of pt_regs. r25 saving is no longer done here to allow for future reordering of regfile in pt_regs w/o touching this macro Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: entry.S: use single EXCEPTION_PROLOGUEVineet Gupta1-8/+6
Returning from pure kernel mode and exception mode use the same code anyways. Remove one the duplicate blocks Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: entry.S: micro-optimize Trap handlerVineet Gupta2-4/+5
Elide the need to re-read ECR in Trap handler by ensuring that EXCEPTION_PROLOGUE does that at the very end just before returning to Trap handler ARCv2 EXCEPTION_PROLOGUE already did that, so same for ARcompact and the common trap handler adjusted to use cached ECR Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: entry.S: move some code around for cache locality in return pathVineet Gupta2-48/+52
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: entry.S: split into ARCompact ISA specific, common bitsVineet Gupta5-681/+711
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: entry.S: Ensure that restore_regs is local to compilation unitVineet Gupta1-4/+4
This fixes the possible link/relo errors, since restore_regs will be provided by ISA code, but called from ARC common code. The .L prefix reassures binutils that it will be in same compilation unit. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: entry.S: comments cleanupVineet Gupta1-26/+20
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: entry.S: Trap handler to use r10 for syscall vs. brkpt decisionVineet Gupta1-2/+2
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: entry.S: FAKE_RET_FROM_EXCPN can always use r9Vineet Gupta2-21/+19
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: entry.S: confine EXCEPTION_* macros to one fileVineet Gupta2-15/+17
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: entry.S: canonical'ize EXCEPTION_{PROLOGUE,EPILOGUE}Vineet Gupta2-18/+3
-EXCEPTION_EPILOGUE introduced -EXCEPTION_PROLOGUE now also includes reg file saving Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: entry.S: Introduce INTERRUPT_{PROLOGUE,EPILOGUE}Vineet Gupta3-79/+23
-common'ize macros for level 1 and level 2 interrupts Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: entry.S: common'ize scrtach reg freeup in intr + exceptionsVineet Gupta2-27/+18
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: untangle cache flush loopVineet Gupta1-25/+55
- Remove the ifdef'ery and write distinct versions for each mmu ver even if there is some code duplication Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: cacheflush: No need to retain DC_CTRL from __before_dc_op()Vineet Gupta1-20/+19
That is because __after_dc_op() already reads it for status check, so it is better anyways to use that "newer" value. Also reduces the clutter in callers for passing from/to these routines. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: cacheflush: move some code around, delete old commentsVineet Gupta1-165/+102
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: mm/cache_arc700.c -> mm/cache.cVineet Gupta2-1/+1
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: [axs101] Add missing __init annotationsVineet Gupta1-6/+6
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: [axs101] STAR 9000799830: Fix SD cards supportAlexey Brodkin1-1/+19
As DW Mobile Storage databook says it's required to use "Hold Register" if card is enumerated in SDR12 or SDR25 modes. It means we need to act in the same way as in Altera's Socfpga implementation - set "use hold reg" bit in commad. Note that for upstream proper solution would be to remove dw_mci_pltfm_prepare_command() at all and set the bit right in dw_mci_prepare_command() for all platforms. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: [axs101] Tweak DDR port aperture mappings for performanceVineet Gupta1-4/+4
Route all MB originated traffic to DDR Port 1 and keep Port 0 for CPU traffic only Basic system parameters -------------------------------------------------------------------------------------- Host OS Description Mhz tlb cache mem scal pages line par load bytes ----------------- ------------- --------------------------------------- ---- ----- ----- ------ ---- axs101-sd-2-new-f Linux 3.13.0+ axs101-sd-2-new-fw-old-img-rerun 739 8 32 1.1100 1 axs101-sd-3-arc-3 Linux 3.13.9+ axs101-sd-3-arc-3.13-tip-regression 735 8 32 1.1000 1 axs101-sd-9-diffe Linux 3.13.11 axs101-sd-9-different-tweak 740 8 32 1.0000 1 Processor, Processes - times in microseconds - smaller is better ------------------------------------------------------------------------------ Host OS Mhz null null open slct sig sig fork exec sh call I/O stat clos TCP inst hndl proc proc proc --------- ------------- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- axs101-sd Linux 3.13.0+ 739 0.50 0.88 5.38 14.6 34.1 0.92 5.18 2135 6555 12.K axs101-sd Linux 3.13.9+ 735 0.50 0.90 5.89 19.2 81.4 0.94 4.08 2560 8559 15.K axs101-sd Linux 3.13.11 740 0.50 0.88 4.45 17.8 34.4 0.94 3.25 2052 6493 12.K ^^^^ ^^^^ Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: [axs101] support early 8250 uartVineet Gupta3-3/+5
Earlycon calculates UART clock as "BASE_BAUD * 16". In case of ARC "BASE_BAUD" is calculated dynamically in runtime, basically it is an alias to arc_early_base_baud(), which in turn just does "arc_base_baud/16". 8250 UART on AXS/SDP board uses 33.3MHz clock source which is set in "arc_base_baud" with this change. Additional compatibility string "snps,arc-sdp" is introduced as well because there're different flavours of AXS boards but they all share the same motherboard and so it's possible to re-use the same code for motherbord even if CPU daughterboard changes. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: [axs101] Add support for AXS101 SDP (software development platform)Alexey Brodkin11-0/+792
The AXS10x platforms consist of a mainboard with peripherals, on which several daughter cards can be placed. The daughter cards typically contain a CPU and memory. Signed-off-by: Mischa Jonker <mjonker@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: mm: document system mem map clearlyVineet Gupta2-20/+17
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: stack unwinder to bail if PC is not kernel modeVineet Gupta1-10/+8
Currently, it doesn't invoke the callback but continues to unwind Also while at it - simplify the code a bit Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: perf: Remove unnecessary local variableTobias Klauser1-4/+2
Directly return the result of perf_pmu_register() in arc_pmu_device_probe() instead of assigning and returning variable ret. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19arc: fix use of uninitialized arc_pmuMax Filippov1-1/+0
static arc_pmu in the arch/arc/kernel/perf_event.c is not initialized as it's shadowed by a local variable of the same name in the arc_pmu_device_probe. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Fixes: 03c94fcf954d "ARC: perf: make @arc_pmu static global" CC: <stable@vger.kernel.org> # 4.1 Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: fix section mismatch with allyesconfigVineet Gupta1-1/+1
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: explicit'ify uboot supportVineet Gupta3-1/+18
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: [plat_arcfpga]->[plat_sim]Vineet Gupta9-25/+13
* Remove remanants of legacy ARC FPGA platforms (AA4, ML509...) * Only nsim simulation platform is left, rename platform accordingly * AA4 DT stuff is compatible with nsim for ARC700 so rename it too Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: [arcfpga] RIP legacy ISS based SMP extensionVineet Gupta5-329/+0
With ISS long unsupported, no point in having extension based on it Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: compress cpuinfo_arc_mmu (mainly save page size in KB)Vineet Gupta2-5/+6
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: clocksource cleanupsVineet Gupta1-10/+2
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: RIP broken 64bit RTSCVineet Gupta7-63/+4
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: [kbuild] Retire CONFIG_ARC_CPU_REL_4_10Vineet Gupta1-10/+1
Back when ARC700 4.10 was released, the related kernel features were tied to this config item so they could be disabled in one shot (i.e. LLOCK/SCOND, SWAPE, RTSC..) That having happened a while back, all new ARC customers weill get 4.11+ so those features can be assumed to be present and need not be tied to a top-level (we still retain the ability to individually disable them). Further, since ARCv2 also shares some of those feautes, removing it simplifies things a bit in Kconfig Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19ARC: remove the unused platform helpers from dma mapping APIVineet Gupta3-38/+9
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-05-19ARC: switch to simpler CROSS_COMPILE prefixVineet Gupta4-4/+4
ARC GNU tools have had support for arc-linux-* driver for some time now. This is functionally similar to arc-linux-uclibc-* but uclibc prefix seemed weird at best when trying to compile the kernel itself. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-05-19ARC: fold ___flush_dcache_page into __flush_dcache_pageVineet Gupta2-9/+7
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-05-19ARC: fix warning in sched due to thread_saved_pc()Vineet Gupta1-1/+1
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-05-18Linux 4.1-rc4v4.1-rc4Linus Torvalds1-1/+1
2015-05-18watchdog: Fix merge 'conflict'Peter Zijlstra1-5/+15
Two watchdog changes that came through different trees had a non conflicting conflict, that is, one changed the semantics of a variable but no actual code conflict happened. So the merge appeared fine, but the resulting code did not behave as expected. Commit 195daf665a62 ("watchdog: enable the new user interface of the watchdog mechanism") changes the semantics of watchdog_user_enabled, which thereafter is only used by the functions introduced by b3738d293233 ("watchdog: Add watchdog enable/disable all functions"). There further appears to be a distinct lack of serialization between setting and using watchdog_enabled, so perhaps we should wrap the {en,dis}able_all() things in watchdog_proc_mutex. This patch fixes a s2r failure reported by Michal; which I cannot readily explain. But this does make the code internally consistent again. Reported-and-tested-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-05-18Merge tag 'for-linus-20150516' of git://git.infradead.org/linux-mtdLinus Torvalds3-8/+10
Pull MTD fixes from Brian Norris: "Two MTD fixes for 4.1: - readtest: the signal-handling code was clobbering the error codes we should be handling/reporting in this test, rendering it useless. Noticed by Coverity. - the common SPI NOR flash DT binding (merged for 4.1-rc1) is being revised, so let's change that before 4.1 is minted" * tag 'for-linus-20150516' of git://git.infradead.org/linux-mtd: Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor" mtd: readtest: don't clobber error reports
2015-05-17Merge tag 'usb-4.1-rc4' of ↵Linus Torvalds38-140/+171
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some USB fixes and new device ids for 4.1-rc4. All are pretty minor, and have been in linux-next successfully" * tag 'usb-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb-storage: Add NO_WP_DETECT quirk for Lacie 059f:0651 devices Added another USB product ID for ELAN touchscreen quirks. xhci: gracefully handle xhci_irq dead device xhci: Solve full event ring by increasing TRBS_PER_SEGMENT to 256 xhci: fix isoc endpoint dequeue from advancing too far on transaction error usb: chipidea: debug: avoid out of bound read USB: visor: Match I330 phone more precisely USB: pl2303: Remove support for Samsung I330 USB: cp210x: add ID for KCF Technologies PRN device usb: gadget: remove incorrect __init/__exit annotations usb: phy: isp1301: work around tps65010 dependency usb: gadget: serial: fix re-ordering of tx data usb: gadget: hid: Fix static variable usage usb: gadget: configfs: Fix interfaces array NULL-termination usb: gadget: xilinx: fix devm_ioremap_resource() check usb: dwc3: dwc3-omap: correct the register macros
2015-05-17Merge tag 'tty-4.1-rc4' of ↵Linus Torvalds10-34/+64
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here's some TTY and serial driver fixes for reported issues. All of these have been in linux-next successfully" * tag 'tty-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: pty: Fix input race when closing tty/n_gsm.c: fix a memory leak when gsmtty is removed Revert "serial/amba-pl011: Leave the TX IRQ alone when the UART is not open" serial: omap: Fix error handling in probe earlycon: Revert log warnings
2015-05-17Merge tag 'staging-4.1-rc4' of ↵Linus Torvalds24-110/+152
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging / IIO driver fixes from Greg KH: "Here's some staging and iio driver fixes to resolve a number of reported issues. All of these have been in linux-next for a while" * tag 'staging-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (31 commits) iio: light: hid-sensor-prox: Fix memory leak in probe() iio: adc: cc10001: Add delay before setting START bit iio: adc: cc10001: Fix regulator_get_voltage() return value check iio: adc: cc10001: Fix incorrect use of power-up/power-down register staging: gdm724x: Correction of variable usage after applying ALIGN() iio: adc: cc10001: Fix the channel number mapping staging: vt6655: lock MACvWriteBSSIDAddress. staging: vt6655: CARDbUpdateTSF bss timestamp correct tsf counter value. staging: vt6655: vnt_tx_packet Correct TX order of OWNED_BY_NIC staging: vt6655: Fix 80211 control and management status reporting. staging: vt6655: implement IEEE80211_TX_STAT_NOACK_TRANSMITTED staging: vt6655: device_free_tx_buf use only ieee80211_tx_status_irqsafe staging: vt6656: use ieee80211_tx_info to select packet type. staging: rtl8712: freeing an ERR_PTR staging: sm750: remove incorrect __exit annotation iio: kfifo: Set update_needed to false only if a buffer was allocated iio: mcp320x: Fix occasional incorrect readings iio: accel: mma9553: check input value for activity period iio: accel: mma9553: add enable channel for activity iio: accel: mma9551_core: prevent buffer overrun ...
2015-05-17Merge tag 'char-misc-4.1-rc4' of ↵Linus Torvalds1-12/+12
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fix from Greg KH: "Here is one fix, in the extcon subsystem, that resolves a reported issue. It's been in linux-next for a number of weeks now, sorry for not getting it to you sooner" * tag 'char-misc-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: extcon: usb-gpio: register extcon device before IRQ registration
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-31 04:26:08 +0300